Maritime Maple (EM) Douglas Pine (DP) Moka (PM) Chestnut (CG)

Transcription

1

2 Laminates - Woodgrain Maritime Maple (EM) Douglas Pine (DP) Moka (PM) hestnut (G) Honey (HO) Tigerwood (TW) Teak (TE) Dark Oak (DK) Laminates - Solid herry (H) ayenne Maple (M) White (W) Frost () harcoal (F) Kiwi (KW) Metal Polar White (3002) Silver (3090) Kiwi (3057) Tangerine (3020) Grenadine (3044) harcoal (3064) hampagne (3311) shen (3370) hina lue (3048) Moka (3075) Note : olors are as precise as modern printing technology allows it. For more accuracy, refer to the real samples or finish cards.

3 Visual Index 2 Specifications 4 Reception - R1 Series 19 Reception - R2 Series 32 Reception - R3 Series 43 ccessories 53 onditions & Garantees 57 1

4 receptions rece tions Visual index Visual Index R1 - RET. REEPTION TLE 20 R1 - RET. TRNSTION SHELF 24 R1 - RET. TRNSTION SHELF 27 R1 - LOW TLES 31 DiS3072 RTiS7213 RTiP7213 TMF3522 DiS3066 RTiS6613 RTiP6613 DiS3060 RTiS6013 RTiP6013 DiS3054 RTiS5413 RTiP5413 TMS2436 DiS3048 RTiS4813 RTiS6009 RTiP4813 TMS2424 DiS3042 DiS3030 RTiS4213 RTiS5409 RTiP4213 RTiP3013 DiS3036 DiS3024 RTiS3613 RTiS4809 RTiP3613 RTiP2413 RTiS3013 RTiS4209 TMO2442 Di3072 RTiS2413 RTiS3609 R1 - URVED 90 o Di3066 RTiS7209 RTiS3009 TRNSTION SHELF 28 Di3060 RTiS6609 RTiS2409 Di3054 RTO9013 R2 - RETNGULR TLE 33 Di3048 RTiM7213 RTO9009 Di3042 Di3030 RTiM6613 Ri2472 Di3036 Di3024 RTiM6013 RTS9013 Ri2466 RTiM5413 RTS9009 Ri2460 R1 - URVED 90 o REEPT. TLE 21 RTiM4813 RTiM6009 Ri2454 RTiM4213 RTiM5409 RTM9013 Ri2448 DS9030 RTiM3613 RTiM4809 RTM9009 Ri2442 Ri2430 D9030 RTiM3013 RTiM4209 Ri2436 Ri2424 DM9030 RTiM2413 RTiM3609 RTP9013 RTiM7209 RTiM3009 RTP9009 R2 - RET. TRNS. MODULE 33 RTiM6609 RTiM2409 R1 - URVED 45 o is7242 RTiP7213 TRNSTION SHELF 29 is6642 R1 - URVED 45 o REEPT. TLE 22 RTiP6613 is6042 RTiP6013 RTO4513 is5442 DS4530 RTiP5413 RTO4509 is4842 D4530 RTiP4813 RTiP6009 is4242 is3042 DM4530 RTiP4213 RTiP5409 RTS4513 is3642 is2442 RTiP3613 RTiP4809 RTS4509 RTiP3013 RTiP4209 i7242 RTiP2413 RTiP3609 RTM4513 i6642 RTiP7209 RTiP3009 RTM4509 i6042 RTiP6609 RTiP2409 i5442 R1 - ORNER REEPTION TLE 23 RTP4513 i4842 RTi7213 RTP4509 i4242 i3042 DQS3030 DQ3030 RTi6613 i3642 i2442 RTi6013 R1 - ORNER RTi5413 RTi3613 TRNSTION SHELF 30 R2 - JUNTION SHELF 34 RTi4813 RTi3013 RTi4213 RTi2413 RTQO RTQO3009 R1 - RET. TRNSTION SHELF 24 RTiS7213 R2 - END TRNSTION RTiS6613 RTQS3013 MODULE 34 RTiO7213 RTiS6013 RTQS3009 RTiO6613 RTiS5413 RTiS3613 ils2442 RTiO6013 RTiS4813 RTiS3013 RTQM3013 irs2442 RTiO5413 RTiS4213 RTiS2413 RTQM3009 RTiO4813 RTiO6009 RTiO4213 RTiO5409 RTiM7213 RTQP3013 RTiO3613 RTiO4809 RTiM6613 RTQP3009 il2442 RTiO3013 RTiO4209 RTiM6013 ir2442 RTiO2413 RTiO3609 RTiM5413 RTiM3613 RTiO7209 RTiO3009 RTiM4813 RTiM3013 RTiO6609 RTiO2409 RTiM4213 RTiM2413 2

5 receptions rece tions Visual index R2 - URVED 90 o TLE ND R3 - EXTERIOR URVED 90 o R3 - EXTERIOR URVED 45 o URVED 90 o TRNSTION MODULE 35 R2 - ESSORY R 41 TRNSTION UNIT 47 REEPTION TLE 51 R9024 M70 RE9024LL E4530LL E4530L S9042 M M58 M52 M34 M46 M28 R3 - EXTERIOR URVED 45 o M40 M22 TRNSTION UNIT 47 E4530L E4530 R2 - URVED 90 o TLE ND R2 - LOW TLE 41 RE4524LL RE4524L URVED 45 o TRNSTION MODULE 36 TMS2436 R4524 TMS2424 R3 - LOW TLE 52 S R2 - TKORD 42 TMS2536 RE4524L RE4524 TMS2525 T7013 T6413 R3 - ESSORY R 52 T5813 R2 - RET. REEPTION TLE 37 T5213 M72 T4613 M66 DiS3072 T4013 T2813 R3 - RET. REEPTION TLE 48 M60 DiS3066 T3413 T2213 M54 M36 DiS3060 Di3072 M48 M30 DiS3054 DiS3036 R3 - RET. TRNS. UNIT 44 Di3066 M42 M24 DiS3048 DiS3030 Di3060 DiS3042 DiS3024 RDi2472 Di3054 Di3036 PIGEONHOLE UNITS 54 RDi2466 Di3048 Di3030 Di3072 RDi2460 Di3042 Di3024 PiM6009 PiM2424 Di3066 RDi2454 PiM3214 POM2424 Di3060 RDi2448 PiM2414 PiM1224 Di3054 Di3036 RDi2442 RDi2430 R3 - URVED 90 o REEPT. TLE 49 PiM1214 PHM1711 Di3048 Di3030 RDi2436 RDi2424 PiM2419 PHM1411 Di3042 Di3024 i9030l PiM1219 R3 - URVED 90 o TRNS. UNIT 45 i9030l R2 - URVED 90 o REEPT. TLE 38 i9030 METL ESSORIES 55 Ri9024L DS9030 Ri9024L SMLG SMPE D9030 Ri9024 SMVLT SMEL DM9030 SMVLG SM SMPP SMOX R3 - URVED 90 o REEPT. TLE 50 SMFH i4530l ELETRIITY 56 R2 - URVED 45 o REEPT. TLE 39 R3 - URVED 45 o TRNS. UNIT 46 i4530l -EPOS i4530 -EP DS4530 D4530 Ri4524L Ri4524L DM4530 Ri4524 -ELLS -ELL R3 - ORNER o REEPT. TLE 50 Qi3030 -ETLF48 R2 - ORNER REEP. TLE 40 -ETLF36 R3 - ORNER TRNS. UNIT 46 -ETLF24 DQS3030 DQ3030 R3 - EXTERIOR URVED 90 o RQi2424 REEPTION TLE 51 -LW24-F E9030LL -EWF1 -EWF2 3

6 R1 Reception Tables and Transaction Shelves The R1 series is comprised of: Freestanding Reception Table Transaction Shelf Refer to the sections below for pertinent information on the components itemized here. Transaction Shelf (various fronts available) Reception Table (with pre-drilled holes) Reception Table (w/o pre-drilled holes) Kick plate Reception Table vailable straight (24 to 72 ), curved (90 or 45 ) or as a corner unit. Transaction Shelf vailable straight (24 to 72 ), curved (90 or 45 ) or as a corner unit. LL-L-L- L-L- 30 deep. Work Surface: 29 H, thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), 1 thickness. transaction shelf can be installed on the surface (or not). The reception table that has the transaction shelf comes equipped with pre-drilled holes in the surface. It is important to specify the H so the pre-drilled holes will be available on the surface. Otherwise, using N will signify that the surface does not have pre-drilled holes, either option is at no charge. hoice of depth of end panel L (30 ) or (17 ), configuration LL-L-L- depending on the model. Front: full height modesty, HPL for the straight tables, and HPL or metal for the curved tables. Embossing optional on the metal (OS). Depth of shelf is 12. Offered in two heights: 9½ H or 13½ H (38½ H or 42½ H from the floor). vailable space beneath the actual shelf: 8½ or 12½. TFL surface (L1) or HPL (S1), supported by 2 or 3 posts (when 60 or longer) in anodized aluminum similar to the Time series posts. To be installed on a reception table of the same length equipped with predrilled holes (option H). lso offered with a front (screen under the shelf): laminate, acrylic, embossed metal or accessory bar depending on the configuration (see p.26-27). Metal kick plate available on laminate front. Metal kick plate Optional grommet, see the price list for more details. 4

7 receptions - R1 series Specifications omplementary products Low Table Low tables (15 H.) complement this series. They are offered in different styles. The surface of the table is available in TFL (L1) or HPL (S1), 1 thickness and is supported by 4 anodized aluminum posts similar to the Time series posts, equipped with levellers. The Finishes - R1 Series This is the codification to use in each specific section of the price list refering to the choice of colors for the R1 series. In the price list, the text at the bottom of each page under the product codification zone, refers to the chart below. Shelf (TFL or HPL) Surface (TFL or HPL) Shelf Front (open, metal, acrylic or laminate) Kick-plate (metal) Metal Front ase Surface* Shelf* ase Kick plate Metal front Front screen (under shelf) Laminate Laminate Metal Metal herry (H) herry (H) Silver (3090) Silver (3090) hestnut (G) hestnut (G) Polar White (3002) Polar White (3002) Dark Oak (DK) Dark Oak (DK) shen (3370) shen (3370) ayenne Maple (M) ayenne Maple (M) hampagne (3311) hampagne (3311) Maritime Maple (EM) Maritime Maple (EM) crylic Moka (PM) Moka (PM) Frosted (Gi) Honey (HO) Honey (HO) Laminate Douglas Pine (DP) Douglas Pine (DP) herry (H) Teak (TE) Teak (TE) hestnut (G) Tigerwood (TW) Tigerwood (TW) Dark Oak (DK) White (W) White (W) ayenne Maple (M) harcoal (F) harcoal (F) Maritime Maple (EM) Frost () Frost () Moka (PM) Kiwi (KW) Kiwi (KW) Honey (HO) Douglas Pine (DP) Teak (TE) Tigerwood (TW) White (W) *vailable in harcoal (F) TFL (L1) HPL (S1) Frost () Kiwi (KW) 5

8 R2 Modules and Tables The R2 Series is comprised of: Freestanding Table Module Freestanding Transaction Module Freestanding Reception Table Refer to the sections below for pertinent information on the components itemized here. Table Fascia Transaction Module Reception Table Kick plate Table vailable straight (24 to 72 ) or curved (90 or 45 ). Transaction Module vailable straight (24 to 72 ), curved (90 or 45 ) or as a corner unit. LL-L-L- 24 Deep. L-L- 6 deep (depth of shelf is 10 ). Work surface: 29 H, thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), 1 thickness. hoice of depth of end panel L (24 ) or (11 ), configuration LL-L-L- depending on the model. Must be attached to a Transaction module. The rectangular Table modules have a 9 modesty, recessed 2½, the curved modules do not have modesties. ertain tables from the Take Off collection can be used as a Table module when specifying a 9 modesty (U9), refer to the Take Off price list in the table section. When specifying, the Table and Transaction modules need to be combined. Transaction surface: 42 H thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), 1 thickness. vailable space beneath the actual shelf: 12 1 / 8 Front: full height, in high pressure laminate (HPL). Needs to be combined with a Table module. hoice of two models: fascia 3 H or 13 H with embossing option (OS). The fascia is a metal decorative trim located underneath the transaction shelf. Metal kick plate option matching the fascia color. junction shelf bust to be used to consolidate 2 straight Transaction modules placed at 90. On the inside, there is a space available at the back of the table for any wiring. n End Transaction module can be used to complete a straight Transaction module configuration. 6

9 receptions - R2 series Specifications Reception Table vailable straight (24 to 72 ), curved (90 or 45 ) or as a corner unit. Front: full height modesty, HPL for the straight tables, and HPL or metal for the curved tables. Optional embossing on the metal (OS). Kick plate in metal available on the laminate facades. LL-L-L- L-L- Optional grommet, see the price list for more details. 30 Deep. Work Surface: 29 H, thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), 1 thickness. hoice of depth of end panel L (30 ) or (17 ), configuration LL-L-L- depending on the model. Metal Kick plate omplementary products ccessory ar The accessory bar from Take Off was adapted to install on the interior of the transaction modules with length specific to these units. It is attached with wood screws, and is offered in a variety of colors. maximum of 3 bars can be stacked in the space available of the interior of the transaction module. Tackboard The tackboards have also been designed to install on the interior of the transaction modules with lengths specific to these units. They are attached with Velcro strips and are fabric covered (see current rtopex panel fabricl chart). Low table low table is offered in 2 styles of 18 heights. The surface and end panels are comprised of 1 thick laminate, whereas the shelf is made of metal (see p.41) 7

10 receptions - R2 series Specifications Finishes - R2 Series This is the codification to use in each specific section of the price list refering to the choice of colors for the R2 series. In the price list, the text at the bottom of each page under the product codification zone, refers to the chart below. Shelf (TFL or HPL) Suface (TFL or HPL) Fascia (metal) Kick plate (metal) Metal Front ase Surface* Shelf* ase Fascia Kick plate Metal front ccessory bar Low table shelf Laminate Laminate Metal herry (H) herry (H) Silver (3090) hestnut (G) hestnut (G) Polar White (3002) Dark Oak (DK) Dark Oak (DK) shen (3370) ayenne Maple (M) ayenne Maple (M) hampagne (3311) Maritime Maple (EM) Maritime Maple (EM) Moka (PM) Moka (PM) Honey (HO) Honey (HO) Douglas Pine (DP) Douglas Pine (DP) Teak (TE) Teak (TE) Tigerwood (TW) Tigerwood (TW) White (W) White (W) harcoal (F) harcoal (F) Frost () Frost () Kiwi (KW) Kiwi (KW) *vailable in TLF (L1) HPL (S1) 8

11 R3 The Transaction Units and Reception Tables The R3 Series is comprised of: Freestanding Transaction Unit Freestanding Reception Table Refer to the sections below for pertinent information on the components itemized here. Reception Table Transaction Unit Transaction Unit It is comprised of a metal structure, to which the following attach: - work surface 24 deep. - transaction shelf. - tiled front divided into 3 sections. vailable straight (24 to 72 in length), interior or exterior curve (90 or 45 ) and corner unit. hoice of end panel configuration (LL-L-L-) depending on the model. The bases combine a metal structure and a laminate piece which is inserted as a trim. Its color needs to be specified along with the color of the metal. Front : - Divided into 3 sections (level 1 at bottom, level 2 in center and level 3 at top). - Material used depending on configuration: 11 / 16 HPL panel, metal (perforations optional) or acrylic 3 / hoice of 6 configurations (# ). Specify one per transaction unit. Possible configurations : dd H for a perforated motif in the metal section (example: 2H) Work Surface: 29 H, thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), depth 24. Transaction surface: 42 H, in TFL (L1) or HPL (S1), 12 deep. vailable space beneath the actual shelf: 12 1 / 8. Front edges of the shelves and surfaces are rounded. 9

12 receptions - R3 series Specifications Reception Table It is comprised of a metal structure, to which the following attach: - work surface 30 deep. - tiled front divided into 2 sections. vailable straight (24 to 72 in length), interior or exterior curve (90 or 45 ) and corner unit. hoice of end panel configuration (LL-L-L-) depending on the model. The bases combine a metal structure and a laminate piece which is inserted as a trim. Its color needs to be specified along with the color of the metal. * multiple unit configuration require a sufficient amount of full end panels to ensure stability. Front : Divided into 2 sections (level 1 at bottom and level 2 at top) Material used depending on configuration: 11/16 HPL panel, metal (perforations optional). hoice of 3 configurations (#7-8-9). Specify one per reception table. Possible configurations: Work Surface: 29 H, thermally fused laminate TFL (L1) or high pressure laminate HPL (S1), depth 30. Grommet option, see price list for further details. omplementary products ccessory ars The Take Off accessory bar was adapted to attach to the work surface of a straight transaction unit, not curved. vailable in Silver and Polar White. Only a single bar can be installed due to height availablity underneath the transaction shelf. variety of lengths available (off module). Low Table low table (18 H.) complements this series. It is offered in 2 dimensions. The low table uses the same type of metal structure as the reception tables, with a surface and a central shelf, in laminate (see p.52). Front The stiffeners on the straight metal sections are equipped with one or two grooves 9½ long which allows for the attaching of several small accessories (file or pencil tray, cell phone or business card holder). Therefore adding an accessory bar is not required unless a horizontal paper tray is used (configurations #1 and # 4). 10

13 receptions - R3 series Specifications Finishes - R3 Series This is the codification to use in each specific section of the price list refering to the choice of colors for the R3 series. In the price list, the text at the bottom of each page under the product codification zone, refers to the chart below. Shelf (TFL or HPL) Surface (TFL or HPL) Front (metal, acrylic, TFL, depending on configuration selected) ccent (TFL) End panel structure (metal) Surface* Shelf* ccent (interior of end panel) ccessory bar End panel structure Front (N1- N2 - N3) Laminate Laminate Metal Metal herry (H) herry (H) Silver (3090) Silver (3090) hestnut (G) hestnut (G) Polar White (3002) Polar White (3002) Dark Oak (DK) Dark Oak (DK) shen (3370) ayenne Maple (M) ayenne Maple (M) hampagne (3311) Maritime Maple (EM) Maritime Maple (EM) hina lue (3048) Moka (PM) Moka (PM) harcoal (3064) Honey (HO) Honey (HO) Grenadine (3044) Douglas Pine (DP) Douglas Pine (DP) Kiwi (3057) Teak (TE) Teak (TE) Moka (3075) Tigerwood (TW) Tigerwood (TW) Tangerine (3020) White (W) White (W) crylic harcoal (F) harcoal (F) Frosted (Gi) Frost () Frost () Laminate Kiwi (KW) Kiwi (KW) herry (H) hestnut (G) Dark Oak (DK) ayenne Maple (M) Maritime Maple (EM) Moka (PM) Honey (HO) Douglas Pine (DP) Teak (TE) Tigerwood (TW) White (W) *vailable in TLF (L1) HPL (S1) harcoal (F) Frost () Kiwi (KW) 11

14 receptions Genaral Info Technical Specifications The work surfaces and transaction shelves are constructed of 1 thick particleboard. They are laminated on both sides and surrounded by a 2.5mm PV edge in assorted colors to finish and match the surface. The work surfaces and transaction shelves can be ordered in either thermally fused or hgh pressure laminate. The HPL adds 1/16 overall to the surfaces. Surface Directional Woodgrain The woodgrain runs parallel with the long side of the surface whereas a surface that is symetrical has the grain at 45. Storage Pigeonhole Units With a variety of sizes, the reception series pigeonhole units are made of a laminate frame 11/16 thick, in which there are metal shelves inserted. The shelves have a 2.5mm long integrated tab that allows attaching identification tags (not included). Depending on the model, insertion of letter or legal documents, and even packages is possible (see p.54). Vertical space between each shelf is 2½. Pedestals Surface-attaching pedestals, freestanding pedestals and mobile pedestals from the IR, Time, Take Off or Uni-T series are compatible with the 3 reception series. vailable space under the surfaces to add a pedestal: R1 - R2 Reception Tables 28 h x 26½ deep R2 ombined Modules 28 h x 20¾ deep R3 Transaction Unit and Reception Table 28 h x 24 deep Grommet Option The grommets can be factory installed on the reception tables in all 3 of the reception series. The grommet allows access for large caliber wiring and attachment of task lights, flat screen supports and surface multi-outlet modules. The grommet has a black finish. For the rectangular tables, the grommet can be specified on the left (GL), right (GR) or center (G). For curved tables and corner tables the grommet has to be specified on the left (GL) or the right (GR) only. If no code is specified, then no grommet will be installed. 12

15 receptions Genaral Info Freestanding Furniture It is possible to add to the work environment with freestanding furniture from rtopex (credenzas, hutches, storage units, bookcases etc.). Electricity Multi-outlet Module Two types of surface modules are available and can be ordered separately. In both cases, no pre-drilling of holes is required. The half-moon shaped unit attaches with Velcro, whereas the rectangular unit attaches in a grommet or on the contour of a surface. Refer to the description of the products for more details. Fasteners and Wire Trough Made of rigid plastic, the the wire fasteners are used for holding wiring under the surface. The wire trough is self-adhesive and measures 24 in length and can be attached on the length of an end panel or leg to hide vertical wiring. Fasteners Wire Trough The complementary products ccessories The metal accessories are designed to install on the rtopex accessory bars, or to be placed on surfaces. ertain accessories are stackable to maximize space, they are offered in various colors (see chart at bottom of page and front inside cover). * Note that the plastic accessories from other rtopex series are compatible and can be used here. Keyboard Tray To add a keyboard tray, please refer to the current rtopex price lists. Glass Surface It is possible to order a glass surface to place on top of the transaction shelves in the 3 series. These are 3/8 (10mm) thick tempered glass and are attached to the laminate surface with hardware specifically used with glass surfaces. That installation requires drilling into the laminate shelf. ontact ustomer Service for more information. Hardware The knockdown furniture is delivered with the necessary hardware (inserts and screws) already attached to the furnniture. Packaging The pre-assembled furniture (identified by ) is delivered wrapped and does not require assembly apart from adjusting the levellers. ccessories finishes Métal 10 Finishes - ccessories pigeonhole unit shelves Silver (3090) harcoal (3064) Polar White (3002) Grenadine (3044) shen (3370) Kiwi (3057) hampagne (3311) Moka (3075) hina lue (3048) Tangerine (3020) Laminés Finishes- Pigeonhole units herry (H) Douglas Pine (DP) hestnut (G) Teak (TE) Dark Oak (DK) Tigerwood (TW) ayenne Maple (M) White (W) Maritime Maple (EM) harcoal (F) Moka (PM) Frost () Honey (HO) Kiwi (KW) 13

16 receptions odification odification Located under each product zone is the code specifier that explains what information needs to be inserted to complete the order. The specifying code is normally divided into 2 zones: under the section Specify you must fill in all required fields whereas the Option section gives you the opportunity to add extra details to each product. The chart below explains the list of specifics and options that can be found under the products in the code specifier. SPEIFY ode R _- 1 LL/L/L/ L1/S1 Front Surface ase Shelf Laminate ccent Metal N/H N1-N2-N3 ase Fabric OPTIONS K-Plate Embossing Grommet Series The prefix identifies the series : R1, R2 or R3. Refer to pages 4 to 13 for details regarding these series SPEIFY ode Identify the selected product code. The code is comprised of numbers/ letters describing the product (identification, dimension). LL/L/L/ Identify end panel configuration : Full (L) and/or half (). L1/S1 For products with a top surface, offered in a selection of TFL or HPL, specify 1 TFL (L1) or 1 HPL (S1). Front Identify the front configuration tiling (refer to pages 9-10 and to the codes shown on the top of the R3 series pages). Surface Identify the surface color, TFL or HPL available. Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors N/H Identify the pre-drilling of holes on the work surface (R1 series tables) in order to accomodate the transaction shelf. ode N (no pre-drilling) or code H (with pre-drilling). N1, N2 and N3 Identify the color of the various tile levels (R3 series tables and transaction units). Refer to the product description and p.9 for details, and to the appropriate finish cards to visualize the colors. ase Identify the pigeonhole unit s case color. vailable in laminate only. Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors. Fabric Identify the choice of fabric (R2 series tackboard) offered in 5 grades. Refer to the rtopex Panel fabric charts to visualize the available colors ase Identify the base color. Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors. Shelf Identify the shelf color. Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors. Laminate Identify the front color (laminate) of the transaction shelf (R1 series). Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors. ccent Identify the front color (laminate) of the vertical insertion (on the R3 end panels). Refer to the product description for details and to the interior front cover or the Nature finish card to visualize the colors. Metal Identify the finish of certain metal components (fascia, kick-plate, front, end panel structure, leg). Refer to the product description, to pages 5, 8 and 11 for codes and to the interior front cover or the rtopex Metal color charts to visualise enamel finishes OPTIONS Kick plate (K-plate) If desired, add a 3 H. metal kick plate (code F) on the R2 series transaction module. The kick plate color will match the fascia color (specified under Metal ). Embossing If desired, add the embossing option (code OS) on the metal fronts of the R1/R2 series furniture and the 13 H. metal fascia of the R2 series. Grommet If desired, identify the position for the grommet on furniture where this option is available. Refer to product description and to page 12 for details. 14

17 receptions odification odification Here are various codification examples, applied to different products. R1 Series Rectangular reception table - 29 H. Table 48 L. LL end-panel Laminate work surface, Moka color ase : Moka Metal : Polar White Transaction shelf to be installed SPEIFY OPTIONS ode LL/L/L/ L1/S1 Surface ase Metal R1- Di LL - L1 - PM - PM F - H - Order codification: R1-Di3048-LL-L1-PM-PM-3002-F-H N/H Grommet R1 Series urved 45 o transaction shelf 9 H. shelf Laminate shelf, Maritime Maple color crylic front SPEIFY ode L1/S1 Shelf R1- RTP L1 - EM - Gi Order codification: R1-RTP4509-L1-EM-Gi R2 Series urved 90 o transaction module HPL shelf, hestnut finish ase : hestnut Metal : hampagne Kick plate option Embossing option on 13 H. fascia SPEIFY OPTIONS ode L1/S1 Shelf ase Metal K-Plate Embossing R S1 - G - G F OS Order codification: R S1-G-G-3311-F-OS R2 Series urved 45 o reception table/ metal front end-panel Laminate work surface, Douglas Pine color ase : Douglas Pine Metal : Polar White Embossed metal front Grommet option (right) SPEIFY OPTIONS ode L/L/ L1/S1 Surface ase Metal R2- DM L1 - DP - DP OS - GR Order codification: R2-DM4530--L1-DP-3002-OS-GR Embossing Grommet R3 Series urved 90 o reception table #7 Front configuration with perforated metal HPL work surface, White color ccent : White Metal : Silver N1 : Grenadine N2 : Grenadine Grommet option (left) SPEIFY OPTIONS ode Front L1/S1 Surface ccent Metal R3- Qi3030-7H - S1 - W - W GL Order codification: R3-Qi3030-7H-S1-W-W GL N1 N2 Grommet R3 Series Rectangular transaction unit 60 Long L end-panel #6 Front configuration with perforated metal Laminate work surface and shelf, White color ccent : Tigerwood Metal : Silver N1 : Silver N2 : Tigerwood N3 : Tigerwood SPEIFY ode LL/L/L/ Front L1/S1 Surface Shelf ccent Metal N1 N2 N3 R3- RDi L - 6H - L1 - W - W - TW TW - TW Order codification: R3-RDi2460-L-6H-L1-W-W-TW-3090-TW-TW

18 receptions - R1 R1 Typical layouts R1-LP001 R1-LP002 R1-LP urved 90 o 60 urved 90 o 60 R1-LP004 R1-LP005 R1-LP urved 45 o (2x) urved 45 o (2x) 48 R1-LP007 R1-LP008 R1-LP urved 45 o (4x) urved 45 o 42 urved 45 o 36 16

19 receptions - R2 R2 Typical layouts R2-LP001 R2-LP002 R2-LP urved 90 o 48 urved 90 o R2-LP004 R2-LP005 R2-LP urved 45 o (2x) urved 45 o (2x) R2-LP007 R2-LP008 R2-LP urved 45 o 48 urved 45 o 42 17

20 receptions - R3 R3-LP R3 Typical layouts R3-LP R3-LP urved 90o urved 90o R3-LP R3-LP R3-LP urved 45o urved 45o (2x) 48 R3-LP007 R3-LP008 R3-LP009 Interior curved 45o Interior curved 45o urved 45o (2x) urved 45o (2x) R3-LP011 urved 90o R3-LP010 urved 45o (5x) 18 urved 45o (2x) 42

21 R119

22 REEPTION TLES R1 RETNGULR REEPTION TLE - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DiS ,1 125, DiS ,6 120, DiS ,1 112, DiS ,6 105, DiS ,1 98, DiS ,6 90, DiS ,1 82, DiS ,6 75, DiS ,1 68,0 LL L L (End panel configuration) Rectangular reception table - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". * If a transaction shelf (see p.24 to 27) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : LMINTE / METL KIK PLTE Di ,1 125, Di ,6 120, Di ,1 112, Di ,6 105, Di ,1 98, Di ,6 90, Di ,1 82, Di ,6 75, Di ,1 68,0 LL L L (End panel configuration) Rectangular reception table - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. * If a transaction shelf (see p.24 to 27) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). ode N (without pre-drilling) ode H (with pre-drilling) Specify ode : onsult the above list. LL/L/L/ : Specify the configuration code of the end panels (LL, L, L or ), see p.4. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.4. Surface : Specify the color for the surface, see p.5. ase : Specify the color of the end panels and the laminate front, see p.5. Metal (Laminate front/metal kick plate) : Specify the color of the kick plate, see p.5. N/H : Specify the addition of pre-drilled holes for the counter top (H) or a surface without pre-drilling (N), see p Option Grommets : Grommet option can be installed on left (GL), center (G) or right (GR), add $30 ea., see p.12.

23 REEPTION TLES R1 URVED REEPTION TLE 90 o - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DS ,7 125,0 L L (End panel configuration) urved reception table 90 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". * If a transaction shelf (see p.28) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : LMINTE / METL KIK PLTE D ,7 125,0 L L (End panel configuration) urved reception table 90 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. * If a transaction shelf (see p.28) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : METL DM ,7 125,0 L L (End panel configuration) urved reception table 90 o - 29" H. with variety of end panel configurations. Metal front recessed 2-5 / 8 ". * If a transaction shelf (see p.28) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). Front with embossed metal option: ode N (without pre-drilling) ode H (with pre-drilling) Specify ode : onsult the above list. L/L/ : Specify the code of the configuration of the end panels (L, L or ), see p.4. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.4. Surface : Specify the color for the surface, see p.5. ase : Specify the color of the end panels and the laminate front, see p.5. Metal (Laminate front/metal kick plate) : Specify the color of the kick plate, see p.5. N/H : Specify the addition of pre-drilled holes for the counter top (H) or a surface without pre-drilling (N), see p.4. Option Embossing (Metal Front) : If desired, add the option for embossing (OS), offered without charge. Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p

24 REEPTION TLES R1 URVED REEPTION TLE 45 o - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DS ,1 125,0 L L (End panel configuration) urved reception table 45 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". * If a transaction shelf (see p.29) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : LMINTE / METL KIK PLTE D ,1 125,0 L L (End panel configuration) urved reception table 45 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. * If a transaction shelf (see p.29) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : METL DM ,1 125,0 L L (End panel configuration) urved reception table 45 o - 29" H. with variety of end panel configurations. Metal front recessed 2-5 / 8 ". * If a transaction shelf (see p.29) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). Front with embossed metal option: ode OS (embossing) ode N (without pre-drilling) ode H (with pre-drilling) Specify ode : onsult the above list. L/L/ : Specify the code of the configuration of the end panels (L, L or ), see p.4. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.4. Surface : Specify the color for the surface, see p.5. ase : Specify the color of the end panels and the laminate front, see p.5. Metal (Laminate front/metal kick plate) : Specify the color of the kick plate, see p.5. N/H : Specify the addition of pre-drilled holes for the counter top (H) or a surface without pre-drilling (N), see p.4. Option Embossing (Metal Front) : If desired, add the option for embossing (OS), offered without charge. 22 Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p.12.

25 REEPTION TLES R1 ORNER TLES - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DQS ,4 120,0 orner table - 29" H. with end panels. Laminate front recessed 2-5 / 8 ". nodized aluminum central leg. * If a transaction shelf (see p.30) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). FRONT : LMINTE / METL KIK PLTE DQ ,4 120,0 orner table - 29" H. with half end panels. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. nodized aluminum central leg. * If a transaction shelf (see p.30) is ordered for this table, specify the code (H) for the pre-drilled holes (factory installed) for the table. For a table without a transaction shelf, specify the code (N). ode N (without pre-drilling) ode H (with pre-drilling) Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.4. Surface : Specify the color for the surface, see p.5. ase : Specify the color of the end panels and the laminate front, see p.5. Metal : Specify the color of the kickplate, see p.5. N/H : Specify the addition of pre-drilled holes for the counter top (H) or a surface without pre-drilling (N), see p.4. Option Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p

26 TRNSTION SHELVES R1 RETNGULR TRNSTION SHELF Dimensions Product ode Price Specifications OPEN D (L1) (S1) u.ft. lb 13" H RTiO ,2 46, RTiO ,6 41, RTiO ,0 37, RTiO ,4 33, RTiO ,8 30, RTiO ,2 26, RTiO ,6 22, RTiO ,0 18, RTiO ,4 15,0 9" H RTiO ,0 31, RTiO ,5 28, RTiO ,1 26, RTiO ,7 23, RTiO ,3 20,8 D : Number of posts RTiO ,9 18, RTiO ,5 15, RTiO ,1 13, RTiO ,7 10,4 LMINTE D : Number of posts Transaction shelf with rectangular surface, 13" H. or 9" H. Open front. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 13" H RTiS ,2 64, RTiS ,6 57, RTiS ,0 52, RTiS ,4 47, RTiS ,8 41, RTiS ,2 36, RTiS ,6 31, RTiS ,0 26, RTiS ,4 21,0 9" H RTiS ,0 43, RTiS ,5 39, RTiS ,1 36, RTiS ,7 32, RTiS ,3 29, RTiS ,9 25, RTiS ,5 21, RTiS ,1 18, RTiS ,7 14,5 Transaction shelf with rectangular surface, 13" H. or 9" H. Laminate front. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 24 Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Laminate (Laminate Front) : Specify the color of the front (laminate), see p.5.

27 TRNSTION SHELVES R1 RETNGULR TRNSTION SHELF Dimensions Product ode Price Specifications METL D (L1) (S1) u.ft. lb 13" H RTiM ,2 64, RTiM ,6 57, RTiM ,0 52, RTiM ,4 47, RTiM ,8 41, RTiM ,2 36, RTiM ,6 31, RTiM ,0 26, RTiM ,4 21,0 9" H RTiM ,0 43, RTiM ,5 39, RTiM ,1 36, RTiM ,7 32, RTiM ,3 29,0 D : Number of posts RTiM ,9 25, RTiM ,5 21, RTiM ,1 18, RTiM ,7 14,5 RYLI D : Number of posts Transaction shelf with rectangular surface, 13" H. or 9" H. Embossed metal front. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 13" H RTiP ,2 64, RTiP ,6 57, RTiP ,0 52, RTiP ,4 47, RTiP ,8 41, RTiP ,2 36, RTiP ,6 31, RTiP ,0 26, RTiP ,4 21,0 9" H RTiP ,0 43, RTiP ,5 39, RTiP ,1 36, RTiP ,7 32, RTiP ,3 29, RTiP ,9 25, RTiP ,5 21, RTiP ,1 18, RTiP ,7 14,5 Transaction shelf with rectangular surface, 13" H. or 9" H. Frosted acrylic front. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Metal (Metal Front) : Specify the color of the front (metal), see p.5. 25

28 TRNSTION SHELVES R1 RETNGULR TRNSTION SHELF Dimensions Product ode Price Specifications ESSORY RS D (L1) (S1) u.ft. lb 13" H RTi ,2 64, RTi ,6 57, RTi ,0 52, RTi ,4 47, RTi ,8 41, RTi ,2 36, RTi ,6 31, RTi ,0 26, RTi ,4 21,0 D : Number of posts ESSORY RS and LMINTE Transaction shelf with rectangular surface, 13" H. Front comprised of 3 anodized aluminum accessory bars. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 13" H RTiS ,2 64, RTiS ,6 57, RTiS ,0 52, RTiS ,4 47, RTiS ,8 41, RTiS ,2 36, RTiS ,6 31, RTiS ,0 26, RTiS ,4 21,0 D : Number of posts Transaction shelf with rectangular surface, 13" H. Front comprised of 1 anodized aluminum accessory bar and laminate section at base. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 26 Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Laminate (Laminate Front) : Specify the color of the front (laminate), see p.5.

29 TRNSTION SHELVES R1 RETNGULR TRNSTION SHELF Dimensions Product ode Price Specifications ESSORY RS and METL D (L1) (S1) u.ft. lb 13" H RTiM ,2 64, RTiM ,6 57, RTiM ,0 52, RTiM ,4 47, RTiM ,8 41, RTiM ,2 36, RTiM ,6 31, RTiM ,0 26, RTiM ,4 21,0 D : Number of posts ESSORY RS and RYLI Transaction shelf with rectangular surface, 13" H. Front comprised of 1 anodized aluminum accessory bar and embossed metal section at base. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. 13" H RTiP ,2 64, RTiP ,6 57, RTiP ,0 52, RTiP ,4 47, RTiP ,8 41, RTiP ,2 36, RTiP ,6 31, RTiP ,0 26, RTiP ,4 21,0 D : Number of posts Transaction shelf with rectangular surface, 13" H. Front comprised of 1 anodized aluminum accessory bar and acrylic section at base. Supported by anodized aluminum posts (2 or 3 - see column "D"). Installs on the rectangular reception table of the R1 series. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Metal (Metal Front) : Specify the color of the front (metal), see p.5. 27

30 TRNSTION SHELVES R1 URVED 90 o TRNSTION SHELF Dimensions Product ode Price Specifications OPEN (L1) (S1) u.ft. lb 13" H RTO ,6 44,0 9" H RTO ,3 40,0 Transaction shelf with curved surface 90 o, 13" H or 9"H. Open front. Supported by 2 anodized aluminum posts. Installs on the curved 90 o reception table of the R1 series. LMINTE 13" H RTS ,6 59,0 9" H RTS ,3 55,0 Transaction shelf with curved surface 90 o, 13" H or 9"H. Laminate front. Supported by 2 anodized aluminum posts. Installs on the curved 90 o reception table of the R1 series. EMOSSED METL 13" H RTM ,6 59,0 9" H RTM ,3 55,0 Transaction shelf with curved 90 o surface, 13" H or 9"H. Embossed metal front. Supported by 2 anodized aluminum posts. Installs on the curved 90 o reception table of the R1 series. RYLI 13" H RTP ,6 59,0 9" H RTP ,3 55,0 Transaction shelf with curved surface 90 o, 13" H or 9"H. Frosted acrylic front. Supported by 2 anodized aluminum posts. Installs on the curved 90 o reception table of the R1 series. 28 Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Laminate (Laminate Front) : Specify the color of the front (laminate), see p.5. Metal (Metal Front) : Specify the color of the front (metal), see p.5.

31 TRNSTION SHELVES R1 URVED 45 o TRNSTION SHELF Dimensions Product ode Price Specifications OPEN (L1) (S1) u.ft. lb 13" H RTO ,3 48,0 9" H RTO ,1 44,0 Transaction shelf with curved surface 45 o, 13" H or 9"H. Open front. Supported by 2 anodized aluminum posts. Installs on the curved 45 o reception table of the R1 series. LMINTE 13" H RTS ,3 66,0 9" H RTS ,1 61,0 Transaction shelf with curved surface 45 o, 13" H or 9"H. Laminate front. Supported by 2 anodized aluminum posts. Installs on the curved 45 o reception table of the R1 series. EMOSSED METL 13" H RTM ,3 66,0 9" H RTM ,1 61,0 Transaction shelf with curved surface 45 o, 13" H or 9"H. Embossed metal front. Supported by 2 anodized aluminum posts. Installs on the curved 45 o reception table of the R1 series. RYLI 13" H RTP ,3 66,0 9" H RTP ,1 61,0 Transaction shelf with curved surface 45 o, 13" H or 9"H. Frosted acrylic front. Supported by 2 anodized aluminum posts. Installs on the curved 45 o reception table of the R1 series. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Laminate (Laminate Front) : Specify the color of the front (laminate), see p.5. Metal (Metal Front) : Specify the color of the front (metal), see p.5. 29

32 TRNSTION SHELVES R1 ORNER TRNSTION SHELF Dimensions Product ode Price Specifications OPEN (L1) (S1) u.ft. lb 13" H. 34¼ RTQO ,1 66,0 9" H. 34¼ 12 9 RTQO ,0 62,0 Transaction shelf with corner surface, 13" H or 9"H. Open front. Supported by 3 anodized aluminum posts. Installs on the corner reception table of the R1 series. LMINTE 13" H. 34¼ RTQS ,1 94,0 9" H. 34¼ 12 9 RTQS ,0 90,0 Transaction shelf with corner surface, 13" H or 9"H. Laminate front. Supported by 3 anodized aluminum posts. Installs on the corner reception table of the R1 series. EMOSSED METL 13" H. 34¼ RTQM ,1 94,0 9" H. 34¼ 12 9 RTQM ,0 90,0 Transaction shelf with corner surface, 13" H or 9"H. Embossed metal front. Supported by 3 anodized aluminum posts. Installs on the corner reception table of the R1 series. RYLI 13" H. 34¼ RTQP ,1 94,0 9" H. 34¼ 12 9 RTQP ,0 90,0 Transaction shelf with corner surface, 13" H or 9"H. Frosted acrylic front. Supported by 3 anodized aluminum posts. Installs on the corner reception table of the R1 series. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.4. Shelf : Specify the color for the shelf, see p.5. Laminate (Laminate Front) : Specify the color of the front (laminate), see p Metal (Metal Front) : Specify the color of the front (metal), see p.5.

33 LOW TLES R1 Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb 35 22½ 15 TMF ,5 40,0 Low wavy-shaped table,15" H. ase made of anodized tubular aluminum posts with levellers TMS ,3 40, TMS ,2 33,0 Low rectangular table,15" H. ase made of anodized tubular aluminum posts with levellers TMO ,9 42,0 Low oval-shaped table,15" H. ase made of anodized tubular aluminum posts with levellers. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.5. Surface : Specify the color for the surface, see p.5. 31

34 32 R2

35 RETNGULR UNITS R2 RETNGULR TLE Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb Ri ,5 115, Ri ,1 110, Ri ,7 102, Ri ,3 95, Ri ,9 88, Ri ,5 80, Ri ,1 72, Ri ,7 65, Ri ,3 58,0 LL L L (End Panel onfigurations) Rectangular table 29" H. w/variety of end panels, 9" H. modesty panel recessed 2½" To be used with Transaction Module below. TRNSTION MODULE - 42" H. FOR RETNGULR TLE FSI 3" is ,3 120, is ,6 110, is ,0 100, is ,4 90, is ,8 80, is ,2 70, is ,6 60, is ,0 50, is ,4 40,0 Front with metal kick plate option: Rectangular Transaction Module 42" H. with laminate front and 3" H. metal fascia. To be used with the above Ri--- table or certain tables from the Take Off collection. The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. FSI 13" i ,3 120, i ,6 110, i ,0 100, i ,4 90, i ,8 80, i ,2 70, i ,6 60, i ,0 50, i ,4 40,0 FFront with metal kick plate option: Rectangular Transaction Module 42" H. with laminate front and 13" H. metal fascia. To be used with the above Ri--- table or certain tables from the Take Off collection. The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. Specify ode : onsult the above list. LL/L/L/ : Specify the configuration code of the end panels (LL, L, L or ), see p.6. L1/S1 : Specify the code identifying the type of finish for the surface or shelf (L1=TFL, S1=HPL), see p.6. 13" metal front with embossed metal option: Surface (Table) : Specify the color for the work surface, see p.8. ase : Specify the color of the end panels + modesty (+ laminate front of Transaction. Module), see p.8. Shelf (Transaction Module) : Specify the color of the shelf, see p.8. Metal : Specify the color of the metal sections on the front (fascia and optional kickplate), see p8. Option K-plate : Metal kick plate option code (F), add $70, see p.6. Embossing : Optional embossing on 13" H. fascia (OS), no charge. 33

36 END MODULES R2 JUNTION SHELF FOR OUNTER TOP MODULE Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb ,1 3,0 Junction shelf 90 o joining 2 rectangular counter top Modules 42" H. Used to consolidate 2 straight Transaction Modules placed at 90 o. END TRNSTION MODULE FOR 90 ORNER ONFIGURTION - 42" H. Side Dimensions Product ode Price Specifications FSI 3" LEFT side (L1) (S1) u.ft. lb Left ils ,4 40,0 Right irs ,4 40,0 RIGHT side End Transaction Module, 42" H. laminate front with 3" H. metal fascia. Installs next to a rectangular or curved table. Table must have a full leg (L) on the connecting side. The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. FSI 13" LEFT side Left il ,4 40,0 Right ir ,4 40,0 RIGHT side End Transaction Module, 42" H. laminate front with 13" H. metal fascia. Installs next to a rectangular or curved table. Table must have a full leg (L) on the connecting side. The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. 13" metal front with embossed metal option: Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the shelf (L1=TFL, S1=HPL), see p.6. Shelf : Specify the color of the shelf, see p.8. ase : Specify the color of the end panels (and laminate front of Transaction Module), see p.8. Metal : Specify the color of the metal sections on the front (fascia and optional kick plate), see p.8. Option K-plate : Metal kick plate option code (F), add $70, see p Embossing : Optional embossing on 13" H. fascia (OS), no charge.

37 URVED 90 UNITS R2 URVED TLE 90 o - 29" H. Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb R ,6 80,0 L L (End Panel onfigurations) urved Table 90 o - 29" H. with variety of end panels configurations. To be used with the Transaction Modules below. URVED TRNSTION MODULE 90 o - 42" H. FOR URVED TLE 90 o Dimensions Product ode Price Specifications FSI 3" (L1) (S1) u.ft. lb S ,0 75,0 urved Transaction Module 90-42" H. laminate front with 3" H. metal fascia. To be used with the R9024 curved table listed above. Front with metal kick plate option: The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. FSI 13" ,0 75,0 urved Transaction Module 90-42" H. laminate front with 13" H. metal fascia. To be used with the R9024 curved table listed above. Front with metal kick plate option: The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. Specify ode : onsult the above list. L/L/ (Table) : Specify the code of the configuration of the end panels (L, L or ), see p.6. L1/S1 : Specify the code identifying the type of finish for the surface or the shelf (L1=TFL, S1=HPL), see p.6. 13" metal front with embossed metal option: Surface (Table): Specify the color for the work surface, see p.8. ase : Specify the color of the end panels + modesty (+ laminate front of Transaction. Module), see p.8. Shelf (Transaction Module) : Specify the color of the shelf, see p.8. Metal : Specify the color of the metal sections on the front (fascia and optional kick plate), see p.8. Option K-plate : Metal kick plate option code (F), add $70, see p.6. Embossing : Optional embossing on 13" H. fascia (OS), no charge. 35

38 URVED 45 UNITS R2 URVED TLE 45 o - 29" H. Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb R ,6 75,0 L L (End Panel onfigurations) urved Table 45 o - 29" H. with variety of end panels configurations. To be used with the Transaction Modules below. URVED TRNSTION MODULE 45 o - 42" H. FOR URVED TLE 45 o Dimensions Product ode Price Specifications FSI 3" (L1) (S1) u.ft. lb S ,2 75,0 urved Transaction Module 45-42" H. laminate front with 3" H. metal fascia. To be used with the R4524 curved table listed above. Front with metal kick plate option: The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. FSI 13" ,2 75,0 urved Transaction Module 45-42" H. laminate front with 13" H. metal fascia. To be used with the R4524 curved table listed above. Front with metal kick plate option: The Module can be fitted with a metal kick plate trim. dd the code (F), add $70. Specify ode : onsult the above list. L/L/ (Table) : Specify the code of the configuration of the end panels (L, L or ), see p.6. L1/S1 : Specify the code identifying the type of finish for the surface or the shelf (L1=TFL, S1=HPL), see p.6. 13" metal front with embossed metal option: Surface (Table): Specify the color for the work surface, see p.8. ase : Specify the color of the end panels + modesty (+ laminate front of Transaction. Module), see p.8. Shelf (Transaction Module) : Specify the color of the shelf, see p.8. Metal : Specify the color of the metal sections on the front (fascia and optional kick plate), see p.8. Option K-plate : Metal kick plate option code (F), add $70, see p Embossing : Optional embossing on 13" H. fascia (OS), no charge.

39 REEPTION TLES RETNGULR REEPTION TLE - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DiS ,1 125, DiS ,6 120, DiS ,1 112, DiS ,6 105, DiS ,1 98, DiS ,6 90, DiS ,1 82, DiS ,6 75, DiS ,1 68,0 LL L L (End Panel onfigurations) Rectangular reception table - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". ttention : These tables can not be used with a Transaction Module installed in front. FRONT : LMINTE and METL KIK PLTE Di ,1 125, Di ,6 120, Di ,1 112, Di ,6 105, Di ,1 98, Di ,6 90, Di ,1 82, Di ,6 75, Di ,1 68,0 LL L L (End Panel onfigurations) Rectangular reception table - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. ttention : These tables can not be used with a Transaction Module installed in front. Specify ode : onsult the above list. LL/L/L/ : Specify the configuration code of the end panels (LL, L, L or ), see p.7. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.7. Surface : Specify the color for the work surface, see p.8. ase : Specify the color of the end panels and the laminate front, see p.8. Metal : Specify the color of the metal section (kick plate), see p.8. Option Grommets : Grommet option can be installed on left (GL), center (G) or right (GR), add $30 ea., see p

40 REEPTION TLES R2 URVED REEPTION TLE 90-29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DS ,7 125,0 L L (End Panel onfigurations) urved reception table 90 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". ttention : These tables can not be used with a Transaction Module installed in front. FRONT : LMINTE / METL KIK PLTE D ,7 125,0 L L (End Panel onfigurations) urved reception table 90 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. ttention : These tables can not be used with a Transaction Module installed in front. FRONT : METL DM ,7 125,0 L L (End Panel onfigurations) urved reception table 90 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". ttention : These tables can not be used with a Transaction Module installed in front. Metal front with embossed metal option: Specify ode : onsult the above list. L/L/ : Specify the code of the configuration of the end panels (L, L or ), see p.7. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.7. Surface : Specify the color for the work surface, see p.8. ase : Specify the color of the end panels and the laminate front, see p.8. Metal : Specify the color of the metal sections (kick plate or front), see p.8. Option Embossing (Metal front) : If requested, add embossing option (OS), without charge. 38 Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p.12.

41 REEPTION TLES R2 URVED REEPTION TLE 45-29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DS ,1 125,0 L L (End Panel onfigurations) urved reception table 45 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". ttention : These tables can not be used with a Transaction Module installed in front. FRONT : LMINTE / METL KIK PLTE D ,1 125,0 L L (End Panel onfigurations) urved reception table 45 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. ttention : These tables can not be used with a Transaction Module installed in front. FRONT : METL DM ,1 125,0 L L (End Panel onfigurations) urved reception table 45 o - 29" H. with variety of end panel configurations. Laminate front recessed 2-5 / 8 ". ttention : These tables can not be used with a Transaction Module installed in front. Metal front with embossed metal option: Specify ode : onsult the above list. L/L/ : Specify the code of the configuration of the end panels (L, L or ), see p.7. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.7. Surface : Specify the color for the work surface, see p.8. ase : Specify the color of the end panels and the laminate front, see p.8. Metal : Specify the color of the metal sections (kickplate or front), see p.8. Option Embossing (Metal front) : If requested, add embossing option (OS), without charge. Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p

42 REEPTION TLES R2 ORNER REEPTION TLE - 29" H. Dimensions Product ode Price Specifications FRONT : LMINTE (L1) (S1) u.ft. lb DQS ,4 120,0 orner table - 29" H. with half end panels. Laminate front recessed 2-5 / 8 ". nodized aluminum central leg. ttention : These tables can not be used with a Transaction Module installed in front. FRONT : LMINTE / METL KIK PLTE DQ ,4 120,0 orner table - 29" H. with half end panels. Laminate front recessed 2-5 / 8 " equipped with a metal kick plate. nodized aluminum central leg. ttention : These tables can not be used with a Transaction Module installed in front. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.7. Surface : Specify the color for the work surface, see p.8. ase : Specify the color of the end panels and the laminate front, see p.8. Metal : Specify the color of the metal sections (kick plate), see p Option Grommets : Grommet option can be installed on left (GL) or right (GR), add $30 ea., see p.12.

43 DD-ONS R2 ESSORY R Dimensions Product ode Price Specifications u.ft. lb 4 70 M For 72" module 0,5 7, M For module 66" or more 0,4 6, M For module 60" or more 0,4 5, M For module 54" or more 0,4 5, M For module 48" or more 0,3 4, M For module 42" or more 0,3 4, M For module 36" or more 0,2 3, M For module 30" or more 0,2 2, M For module 24" or more 0,2 2,3 ccessory bar, attachs directly onto the inside of the rectangular Transaction Module. an be ordered in the desired length. ar can be installed at desired height depending on selected accessory size. LOW TLE Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb TMS ,9 59, TMS ,6 39,6 Low table with metal shelf. Interior space height : 8½". Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.7. Surface (Table) : Specify the color for the surface, see p.8. ase (Table) : Specify the color of the end panels, see p.8. Metal (Metal shelf & ccessory bar) : Specify the color of the metal : Silver (3090), shen (3370), hampagne (3311) or Polar White (3002). 41

44 DD-ONS R2 TKORD Dimensions Product ode Price Specifications Gr. 1 Gr. 2 Gr. 3 Gr. 4 Gr. 5 u.ft. lb For 72" module T ,8 18, For module 66" or more T ,7 17, For module 60" or more T ,5 15, For module 54" or more T ,4 14, For module 48" or more T ,2 12, For module 42" or more T ,1 10, For module 36" or more T ,9 9, For module 30" or more T ,8 7, For module 24" or more T ,6 5,9 Tackboard, attaches directly to the interior of the rectangular Transaction Module with Velcro strips. Specify ode : onsult the above list. Fabric : Refer to the rtopex panel fabric brochure. 42

45 R3 43

46 TRNSTION UNITS R3 RETNGULR TRNSTION UNIT Price - Fronts Dimensions Product ode Fronts 1 and 2 Front 3 Fronts 4, 5 and 6 Specifications D E D E (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb RDi ,8 215, RDi ,9 198, RDi ,1 180, RDi ,3 162, RDi ,5 144, RDi ,7 126, RDi ,9 108, RDi ,1 90, RDi ,3 72,2 Rectangular counter top component (surface : 29" H., shelf 42" H.) with variety of end panel configurations. The 54" and longer rectangular counter top components are equipped with a central support. The metal structure is equipped with levellers. The choice of TFL or HPL (L1/S1) applies to the the work surfaces and shelf. LL L L (End Panel onfigurations) These units are factory assembled. Specify ode : onsult the above list. LL/L/L/ : Specify the configuration code of the end panels (LL, L, L or ), see p.9. Front : Specify the configuration for the front of the transaction unit (1, 2, 3, 4, 5 or 6), refer to chart at top of page and p.9. * For a metal front made with perforations, specify 1H, 2H, 4H or 6H, see above and p.9. L1/S1 : Specify the code identifying the type of finish for the surface and the shelf (L1=TFL, S1=HPL), see p.9. Surface : Specify the color for the work surface, see p.11. Shelf : Specify the color of the shelf, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the middle level of the front depending on the selected configuration, see p N3 : Specify the color of the top level of the front depending on the selected configuration, see p.11.

47 TRNSTION UNITS R3 INTERIOR URVED 90 o TRNSTION UNIT D Price - Fronts Dimensions Product ode Fronts 1 and 2 Front 3 Fronts 4, 5 and 6 Specifications D E (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb Ri9024L ,0 166,8 Interior curved 90 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panel on left and full end panel on right. entral support leg (inside). D Ri9024L ,0 166,8 Interior curved 90 o transaction unit (surface : 29" H., shelf 42" H.) w/full end panel on left and half end panel on right. entral support leg (inside). D Ri ,0 166,8 Interior curved 90 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panels on left and right. entral support leg (inside). Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (1, 2, 3, 4, 5 or 6), refer to chart at top of page and p.9. * For a metal front made with perforations, specify 1H, 2H, 4H or 6H, see above and p.9. L1/S1 : Specify the code identifying the type of finish for the surface and the shelf (L1=TFL, S1=HPL), see p.9. Surface : Specify the color for the work surface, see p.11. Shelf : Specify the color of the shelf, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the middle level of the front depending on the selected configuration, see p.11. N3 : Specify the color of the top level of the front depending on the selected configuration, see p

48 TRNSTION UNITS R3 INTERIOR URVED 45 o TRNSTION UNIT Price - Fronts Dimensions Product ode Fronts 1 and 2 Front 3 Fronts 4, 5 and 6 Specifications D D E (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb Ri4524L ,5 166,8 Interior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panel on left and full end panel on right. D Ri4524L ,5 166,8 Interior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/full end panel on left and half end panel on right. D Ri ,5 166,8 Interior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panels on left and right. ORNER TRNSTION UNIT D RQi ,1 168,0 D orner transaction unit (surface : 29" H., shelf 42" H.) w/half end panels on left and right. an be used as an end component in a layout. Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (1, 2, 3, 4, 5 or 6), refer to chart at top of page and p.9. * For a metal front made with perforations, specify 1H, 2H, 4H or 6H, see above and p.9. L1/S1 : Specify the code identifying the type of finish for the surface and the shelf (L1=TFL, S1=HPL), see p.9. Surface : Specify the color for the work surface, see p.11. Shelf : Specify the color of the shelf, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the middle level of the front depending on the selected configuration, see p N3 : Specify the color of the top level of the front depending on the selected configuration, see p.11.

49 TRNSTION UNITS R3 EXTERIOR URVED 90 o TRNSTION UNIT Price - Fronts Dimensions Product ode Fronts 1 and 2 Front 3 Fronts 4, 5 and 6 Specifications D (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb RE9024LL ,3 228,0 D Exterior curved 90 o transaction unit (surface : 29" H., shelf 42" H.) with full end panels left and right and central half leg. EXTERIOR URVED 45 o TRNSTION UNIT RE4524LL ,2 166,8 Exterior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/full end panels on left and right RE4524L ,2 166,8 Exterior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panel on left and full end panel on right. It is not recommended to use two exterior curved 45 o transaction units side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o transaction unit above RE4524L ,2 166,8 Exterior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/full end panel on left and half end panel on right. It is not recommended to use two exterior curved 45 o transaction units side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o transaction unit above RE ,2 166,8 Exterior curved 45 o transaction unit (surface : 29" H., shelf 42" H.) w/half end panels on left and right. It is not recommended to use two exterior curved 45 o transaction units side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o transaction unit above. Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (1, 2, 3, 4, 5 or 6), refer to chart at top of page and p.9. * For a metal front made with perforations, specify 1H, 2H, 4H or 6H, see above and p.9. L1/S1 : Specify the code identifying the type of finish for the surface and the shelf (L1=TFL, S1=HPL), see p.9. Surface : Specify the color for the work surface, see p.11. Shelf : Specify the color of the shelf, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the middle level of the front depending on the selected configuration, see p.11. N3 : Specify the color of the top level of the front depending on the selected configuration, see p

50 REEPTION TLES R3 RETNGULR REEPTION TLE Price - Fronts Dimensions Product ode Front 7 Front 8 Front 9 Specifications D (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb Di ,9 179, Di ,6 164, Di ,2 149, Di ,9 134, Di ,6 119, Di ,3 104, Di ,9 89, Di ,6 74, Di ,3 59,8 Rectangular table (surface : 29" H.) with variety of end panel configurations. Front recessed 4½". LL L L (End Panel onfigurations) Rectangular tables 54" and longer have a central support. Grommet option available, see codification. Specify ode : onsult the above list. LL/L/L/ : Specify the configuration code of the end panels (LL, L, L or ), see p.10. Front : Specify the configuration for the front of the transaction unit (7, 8 or 9), refer to chart at top of page and p.10. * For a metal front made with perforations, specify 7H or 9H, see above and p.10. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.10. Surface : Specify the color for the work surface, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the top level of the front depending on the selected configuration, see p Option Grommet : Optional grommet on left (GL) or on right (GR), add 30$ ea., see p.12.

51 REEPTION TLES R3 INTERIOR URVED 90 o REEPTION TLE Price - Fronts Dimensions Product ode Front 7 Front 8 Front 9 Specifications (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb i9030l ,0 118,0 Interior curved 90 o reception table (surface : 29" H.) with half end panel on left and full end panel on right. Front recessed 4½". Grommet option available, see codification. entral support leg (inside) i9030l ,0 118,0 Interior curved 90 o reception table (surface : 29" H.) with full end panel on left and half end panel on right. Front recessed 4½". Grommet option available, see codification. entral support leg (inside) i ,0 118,0 Interior curved 90 o reception table (surface : 29" H.) with half end panels on left and right. Front recessed 4½". Grommet option available, see codification. entral support leg (inside). Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (7, 8 or 9), refer to chart at top of page and p.10. * For a metal front made with perforations, specify 7H or 9H, see above and p.10. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.10. Surface : Specify the color for the work surface, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the top level of the front depending on the selected configuration, see p.11. Option Grommet : Optional grommet on left (GL) or on right (GR), add 30$ ea., see p

52 REEPTION TLES R3 INTERIOR URVED 45 o REEPTION TLE Price - Fronts Dimensions Product ode Front 7 Front 8 Front 9 Specifications (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb i4530l ,5 118,0 Interior curved 45 o reception table (surface : 29" H.) with half end panel on left and full end panel on right. Front recessed 4½". Grommet option available, see codification i4530l ,5 118,0 Interior curved 45 o reception table (surface : 29" H.) with full lend panel on left and half end panel on right. Front recessed 4½". Grommet option available, see codification i ,5 118,0 Interior curved 45 o reception table (surface : 29" H.) with half end panels on left and right. Front recessed 4½". Grommet option available, see codification. ORNER REEPTION TLE Qi ,6 118,0 orner reception table (surface : 29" H.) with half end panels on left and right. an be used as an end unit in a set-up. Front recessed 4½". Grommet option available, see codification. Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (7, 8 or 9), refer to chart at top of page and p.10. * For a metal front made with perforations, specify 7H or 9H, see above and p.10. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.10. Surface : Specify the color for the work surface, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the top level of the front depending on the selected configuration, see p Option Grommet : Optional grommet on left (GL) or on right (GR), add 30$ ea., see p.12.

53 REEPTION TLES R3 EXTERIOR URVED 90 o REEPTION TLE Price - Fronts Dimensions Product ode Front 7 Front 8 Front 9 Specifications (L1) (S1) (L1) (S1) (L1) (S1) u.ft. lb E9030LL ,5 203,0 Exterior curved 90 o reception table (surface : 29" H.) w/full end panels on left and right and central half leg. Front recessed 4½". Grommet option available, see codification. EXTERIOR URVED 45 o REEPTION TLE E4530LL ,5 118,0 Exterior curved 45 o reception table (surface : 29" H.) with half end panel on left and full end panel on right. Front recessed 4½". Grommet option available, see codification E4530L ,5 118,0 Exterior curved 45 o reception table (surface : 29" H.) with full lend panel on left and half end panel on right. It is not recommended to use two exterior curved 45 o tables side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o reception table above. Front recessed 4½". Grommet option available, see codification E4530L ,5 118,0 Exterior curved 45 o reception table (surface : 29" H.) with full end panel on left and half end panel on right. It is not recommended to use two exterior curved 45 o tables side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o reception table above. Front recessed 4½". Grommet option available, see codification E ,5 118,0 Exterior curved 45 o reception table (surface : 29" H.) with half end panels on left and right. It is not recommended to use two exterior curved 45 o tables side-by-side not equipped with full end panels left and right, use instead the exterior curved 90 o reception table above. Front recessed 4½". Grommet option available, see codification. Specify ode : onsult the above list. Front : Specify the configuration for the front of the transaction unit (7, 8 or 9), refer to chart at top of page and p.10. * For a metal front made with perforations, specify 7H or 9H, see above and p.10. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.10. Surface : Specify the color for the work surface, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. N1 : Specify the color of the bottom level of the front depending on the selected configuration, see p.11. N2 : Specify the color of the top level of the front depending on the selected configuration, see p.11. Option Grommet : Optional grommet on left (GL) or on right (GR), add 30$ ea., see p.xx. 51

54 DD-ONS R3 LOW TLE Dimensions Product ode Price Specifications (L1) (S1) u.ft. lb TMS ,3 73, TMS ,2 65,0 Low rectangular table 18" H. with laminate shelf. Specify ode : onsult the above list. L1/S1 : Specify the code identifying the type of finish for the surface (L1=TFL, S1=HPL), see p.10. Surface : Specify the color for the table top, see p.11. ccent : Specify the color for the vertical inserts between the legs (available in laminate only), see p.11. Metal : Specify the color of the metal legs, Silver (3090) or Polar White (3002), see p.11. Shelf : Specify the color of the shelf (available in laminate only), see p.11. ESSORY R Dimensions Product ode Price Specifications u.ft. lb 4 64½ M For surfaces 72" or more 0,5 9,0 4 58½ M For surfaces 66" or more 0,4 8,0 4 52½ M For surfaces 60" or more 0,4 7,5 4 46½ M For surfaces 54" or more 0,3 7,0 4 40½ M For surfaces 48" or more 0,3 6,0 4 34½ M For surfaces 42" or more 0,3 5,0 4 28½ M For surfaces 36" or more 0,2 4,0 4 22½ M For surfaces 30" or more 0,2 3,5 4 16½ M For surfaces 24" or more 0,2 2,5 Specify ode : onsult the above list. Metal : Specify the metsl color (bar and supports), Silver (3090) or Polar White (3002), see p.xx. 52

55 ESSORIES 53

56 ESSORIES PIGEONHOLES 16" DEEP Dimensions Product ode Price Specifications Slots u.ft lb 9" H PiM ,5 75,0 Horizontal Pigeonhole 9" H. equipped with 15 filing slots 2½"H. x 11" wide. Laminate casing with metal dividers equipped with identity tabs. an accommodate both letter and legal size documents. 14" H PiM ,6 61,6 PiM PiM ,4 46, PiM ,7 23,1 Pigeonholes 14" H. equipped with 15, 10 or 5 filing slots 2½"H. x 11" wide. Laminate casing with metal dividers equipped with identity tabs. an accommodate both letter and legal size documents. PiM3214 PiM " H PiM ,6 62, PiM ,3 31,4 PiM2419 PiM1219 Pigeonholes 19" H. equipped with 14 or 7 filing slots 2½"H. x 11" wide. Laminate casing with metal dividers equipped with identity tabs. an accommodate both letter and legal size documents. PiM " H PiM ,9 79, POM ,9 65, PiM ,9 39,6 Pigeonholes 24" H. equipped with 18, 10 or 9 filing slots 2½"H. x 11" wide. Laminate casing with metal dividers equipped with identity tabs. an accommodate both letter and legal size documents. The inferior interior space (available space) of the POM pigeonhole is 9" high. PiM2424 POM2424 PIGEONHOLES 11" DEEP (for hutches) Dimensions Product ode Price Specifications Slots u.ft lb ½ 4 PHM ,4 18, ½ 4 PHM ,1 15,2 PHM1711 PHM1411 Pigeonholes 11" deep equipped with 4 filing slots 2½"H. an accommodate documents both letter (PHM1411) or legal (PHM1711) size. an be installed in the interior of a hutch. 54 Specify ode : onsult the above list. asing : Specify the color of the casing (laminate - pigeonholes), see p.13. Metal : Specify the color of the metal separators (Metal Finish 10), see p.13.

57 ESSORIES METL ESSORIES an be stackable an be front stacking D an be front stacking E With cut out for wiring F Reversible for use on a surface G an be stackable H Description - Horizontal paper tray 15½" x 9" (legal or letter size). an be hooked onto the accessory bar and is stackable (interior space available: 1¾" H when stacking). - Vertical file tray 15" x 6½" x 1¾" (legal size) or 12" x 6½" x 1¾" (letter size). Hooks onto the accessory bar and it is possible to hook a second file tray to the first. - Stationary holder 9" x 4". ttaches to the accessory bar. D - Pencil holder 3" x 3¾" H. ttaches to the accessory bar and it is possible to hook a second holder to the first. E - ell phone holder, attaches to the accessory bar. F - usiness card holder 3¾" x 2"H. ttaches to the accessory bar or can sit on a surface. G - Storage box 8" x 8" x 6"H. Stackable. H - rochure / flyer holder 8½" x 3" x 5"H. Product ode Price Specifications u.ft lb Horizontal Tray - Legal SMLG 40 0,4 2,5 Vertical Tray - Letter SMVLT 42 0,3 2,5 Vertical Tray - Legal SMVLG 48 0,3 2,8 Stationary Holder SMPP 30 0,3 1,3 D Pencil holder SMPE 25 0,1 0,6 E ell Phone Holder SMEL 23 0,1 0,4 F usiness ard Holder SM 19 0,1 0,4 G Storage ox SMOX 40 0,3 2,9 H rochure Holder SMFH 38 0,3 1,1 Specify ode : onsult the above list Metal : Specify the metal color (Metal Finish 10), see p

58 ESSORIES SURFE MULTI-OUTLET MODULES Product ode Price Specifications u.ft lb ttaches w/velcro - Duplex -EPOS 289 0,1 1 Screw mounted - Triplex -EP 310 0,4 5 -EPOS -EP -EPOS : Surface mounted multi outlet module fixed to the surface with Velcro strips included. Module contains 2 outlets and 2 punch outs for communication outlets. onnector and telecommunication wiring not included. Removable covers are included. Electrical cord is 9' long. asing is made of black plastic. -EP : Multi outlet module attaches to the surface with screw clamps on the edge of the surface or through a grommet. Module contains 3 outlets and 2 punch outs for communication outlets. onnector and communication wiring not included. Removable covers are included. Electrical cord is 6' long. The casing is made of anodized aluminum. TSKLIGHTS ND LMPS djustable tasklight on base -ELLS 459 0,7 5 djustable tasklight on bar -ELL 527 0,7 5 Fluorescent lamp (48") -ETLF ,5 2 Fluorescent lamp (36") -ETLF ,5 1,5 Fluorescent lamp (24") -ETLF ,5 1 ELLS : djustable tasklight with fluorescent, shipped with base and surface support. luminium/black finish. -ELLS -ELL ELL : djustable tasklight with fluorescent, shipped with accessory bar support bracket. luminium/black finish. ETLF : Fluorescent lamp, to be installed under a hutch. luminium finish. Pivots 160 o to aim light at desired location. T5 fluorescent and 9' electrical cord included. an be installed under a metal shelf or under a wooden shelf, screws included. -ETLF WIRE TROUGH & FSTENERS Wire trough 24" -LW24-F 51 0,6 1 Single fastener -EWF1 19 0,1 0,3 Double fastener -EWF2 24 0,1 0,3 Wire trough, 24" long sections, self-adhesive. an be installed the length of an end panel or under a surface. Ships in packages of 10, charcoal finish. Wire trough Fasteners Plastic fasteners attach under the surface to hold wiring. Ships in packages of 5, black finish. ssembly hardware included. 56