aaxa TECHNOLOGIES User Guide

Transcription

1 aaxa TECHNOLOGIES User Guide

2 Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving. DO NOT expose to water or wet surfaces. Electric shock may occur. DO NOT expose the projected LED image to your eyes or the eyes of others. DO NOT block or restrict airflow from ventilation holes as this may cause the projector to overheat. Keep the projector and charger away from any heat sources. Caution for Headphone Use Prolonged use at high volume may impair your hearing. High volume during walking or driving may cause distractions and result in injury or death.

3 Table of Contents Chapter 1: At a Glance P2-A Introduction Remote & Keypad Accessories Chapter 2: Getting Started Connecting to WiFi Focus Adjustment / Throw Distance External Inputs/Outputs Navigating the Main Menu Loading External Content Videos Menu Photos Menu Connecting to a Digital Input Connecting to Composite Video Browser Streaming Applications Connecting to a BT Device Apps Smartphone Mirroring Office Chapter 4: Settings Menu Application Manager Networks Settings Bluetooth Settings System Settings Backup & Reset Projector Settings About Language Chapter 5: Technical Details Troubleshooting Specifications Notes

4 P2-A at a Glance Chapter 1 Main Unit Front/Back TF Card Slot Touchpad Focus Adjustment USB Port Headphone Out AV Port Digital Input Power Button Power Port 1

5 Remote & Touchpad Power On/Off Main Menu Select Source Mute Navigation Volume Down Volume Up Video Play Menu Back Remote * P2-A does NOT support keystone feature. NOTE: Pressing power on the remote once will only enable or disable the remote control. In order to fully turn the projector off, hold the power button down on the remote or projector for at least 3 seconds. 2

6 Remote & Touchpad Cont. OK The P2-A incorporates a capacitive touchpad directly onto the top of the projector. This touchpad works in conjunction with a pointer and allows users to select icons, APKs, and scroll through the menu system. Like most notebook touchpads, the touchpad can be double-tapped for a click or used in conjunction with the Enter and Back buttons below the touchpad. 3

7 Accessories Tripod Remote Power Adapter A/V Cable *Under various circumstances, the actual accessories may be different from those shown in the pictures above. Additional accessories are available for purchase at 4

8 Getting Started Chapter 2 Plugging In the projector 1. The P2-A needs to be plugged in and charged for four hours before operation. Powering ON the projector 1. Connect the power cord to the P2-A. 2. Connect the other end of the power cord into the wall power source. 3. Hold the power button for 3 seconds to start the projector. Powering OFF the projector 1. To turn off the projector, hold the power button for 3 seconds. This will fully turn off the projector. Connecting to WiFi 1. View page 6 for details. 5

9 Connecting to WiFi Connecting to WiFi: Select the Settings icon (Fig. 2.1). Select the Network Settings option and navigate to your WiFi network and click on it to connect. A window will appear and ask for a password, please type it in. When finished, press Connect and the projector will connect to your WiFi (Fig. 2.2). Fig. 2.1 Fig. 2.2 Please see next page for steps to establish to a WiFi connection. 6

10 Connecting to WiFi FAQ Connecting to WiFi: P2-A features a WiFi chipset capable of b/g/n connection. This means it is compatible with most WiFi routers. To connect to a WiFi router, follow the following steps: Step 1: Access the Network Settings Submenu: Settings -> Network Settings Step 2: Turn WiFi radio to On by highlighting and toggling the WiFi Button under WiFi settings Step 3: Select the appropriate Router Step 4: Enter the router password in the password selection (by pressing OK ). It is recommended that the automatic IP address acquisition be turned on Troubleshooting 1. Unable to connect a. Check Security Settings WPA/WPA2 PSK b. Check if Router is in range 7

11 Focus Adjustment / Throw Distance Focus Adjustment Spin the focus wheel up or down until the image becomes clear. Throw Distance Chart Throw Distance Unit: Inches Diagonal Size Unit: Inches DIAGONAL SCREEN SIZE 16:9 Aspect Ratio Throw Ratio 1.2 *minimum throw distance: 8 inches 8

12 External Inputs and Outputs TF Card Digital Input (Mini) USB Stick Headphones/speakers Composite AV 9

13 Navigating the Main Menu Main Menu The Main Menu allows access to all the features of the P2-A. Inputs Digital Input- Brings up connection via Digital Input Video-RCA - Brings up connection via A/V Main Menu Features Videos - View videos from external devices such as TF card and USB Photos - View photos from external devices such as TF card and USB Browser - Brings up a browser Streaming - Brings up Youtube, Netflix, Crackle, Hulu, Twitch, and Vevo Apps - Brings up all apps that are already preinstalled or downloaded Mirroring - Mirroring your phone screen on the projector screen Settings - Brings up Application Manager, Network Settings, Bluetooth Settings, Language Settings, Backup&Reset, Projector Settings, etc Office - View files from external devices such as TF card and USB 10

14 Navigating the Main Menu Cont. Pop-Up Menu: The Pop-Up Menu appears after turning the projector on and it can be hidden by clicking the down arrow at the bottom of the screen. Double tap, hold down on the touchpad, and drag up to bring up the Pop-Up Menu. The Pop-Up Menu allows the user to access Previous Menu, Main Menu, Open Applications, and Adjust Volume. Down arrow and Pop-Up Menu 11

15 Loading External Content The P2-A can read files directly from both a TF Card and USB Drive. Supported file types include: MP3 / WMA / OGG / WAV AVI / JPG / GIF/ BMP PPT / DOC / PDF / TXT (up to 32 GB) (up to 32 GB) 12

16 Loading External Content Cont. How to insert your USB Drive Slide your USB Drive into the USB port. Gently slide the drive until it cannot go in any further. (up to 32 GB) *Review the Specifications section of this manual to read about the supported file formats. 13

17 Loading External Content Cont. How to insert your TF Card Slide in your TF card into the TF card slot on the side of the P2-A (as shown in picture). Gently slide the TF card until it clicks into place. *Review the Specifications section of this manual to read about the supported file formats. (up to 32 GB) 14

18 Loading External Content Cont. Once your TF Card or USB Drive is inserted into the projector, the TF Card or USB Drive Storage will be loaded automatically and the content can be found through: Videos Menu Video can be played by clicking Video on the Main Menu. Photos Menu Photo can be shown by clicking Photos on the Main Menu. Office Menu.pdf,.docx,.xls,.ppt,.txt can be shown by clicking Office on the Main Menu. 15

19 Video Menu To view videos, access the content via the Videos icon (Fig 2.6). All sources will be displayed. Select the source and choose the video you want to view (Fig 2.7). Fig. 2.6 Fig

20 Video Submenu While Playing Videos While playing videos the volume is adjustable. To adjust volume, press the volume buttons on the remote or projector or access the Pop-Up menu and adjust through the volume icon. Further controls are available in the Video Player Submenu - which is accessed through the OK button. OK Enter Video Submenu To open/hide the video playback menu, use the OK and Back Buttons on the projector. The Video Submenu allows the following functions i. Insert bookmark - allows to start the video from the bookmark inserted ii. Adjust brightness iii. Next / Previous Video Play the next / previous video iv. Play / Pause v. Full Screen vi. Go Back vii. More 17

21 Video Submenu Cont. More functions can be accessed on the bottom-right corner by clicking the 3-horizontal points. i. Delete bookmark and play from beginning ii. Delete bookmark iii. Play mode iv. External, embedded subtitles priority selection v. Embedded Subtitle Select vi. Audio Track Select vii. Help viii. Return 18

22 Video Submenu Cont. How do I loop a video? 1. On the Submenu, click the 3-horizontal points to access more functions. 2. Click Play Mode and select from Single, Repeat One, Repeat All. 3. To repeat a specific video, select Repeat One. 4. To repeat all video, select Repeat All. 5. To stop loop, select Single. How do I turn on the subtitles (if available)? 1. On the Submenu, click the 3-horizontal points to access more functions. 2. Select Embedded Subtitle Select if the subtitles are hardcoded into video. 3. If using a seperate subtitle file, click External, embedded subtitles priority selection first and choose the external selection. Play Mode Menu Subtitle Menu * After the entire list has played, the projector will automatically go back to the video list. 19

23 Photos Menu Fig. 2.3 To view pictures, access the content via the Photos icon (Fig 2.3). All albums from internal and external storage will be displayed (Fig 2.4). Select the album and choose the picture you want to view (Fig 2.5). Fig. 2.4 Fig

24 Photo Menu Cont. To access to the previous photo, drag the current photo to the left. To access to the next photo, drag the current photo to the right. Double press the OK button or double tap the touchpad once to zoom in on the picture. Double press the OK button or double tap the touchpad again to return the picture to its original size. 21

25 Connecting to a Computer via Digital Input Step 1: Connect one end of the Digital Input Adapter Cable to your computer s Digital Input port. Step 2: Connect the other end of the Digital Input Adapter Cable to your P2-A s mini Digital Input port. Step 3: In the Main Menu, select the Video-In Icon. Select the Video-In icon 22

26 Connecting to a Computer Cont. Step 4: Enabling Digital Video output on your Computer To enable Digital Video output on your computer most computers require turning on the video output feature. Each computer is different. Please consult your owner s manual for instructions to enable Digital Video output. Below are standard instructions for a Windows 10 computer not all systems are the same. Step 5: Press Windows+P to toggle through display settings. Select either Duplicate or Extend depending on your viewing option. *NOTE: Different operating systems may differ Step 6: 1. Right click on computer desktop and select Screen Resolution. 2. Display Properties window will pop up and select the Advance Display Settings. 3. Please make sure the Multiple displays has the Duplicate these displays option selected and the Resolution is 854 x 480 or below as pictured in the red box. 4. If the image is blurry or the text is not legible, adjust the screen resolution. 23

27 Connecting to Digital Input Video Source In the Main Menu Connectivity to Multimedia Devices Select the Digital Input Icon The P2-A can connect to many media devices including: ipod, iphone, ipad, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Some smartphones require video out capabilities to be displayed with the P2-A. Check with your phone manufacturer. 24

28 Connecting to Composite Video Step 1: Connect the 3.5mm Composite A/V Cable to the side of the P2-A. Step 2: Connect the composite end of the AV Cable (Red, White,Yellow) to your own male AV cable. 25

29 Connecting to Composite Video Cont. Step 3: In the Main Menu Step 4: Turn on your multimedia device. Select the Video-RCA Icon *Some smartphones require video out capabilities to be displayed with the P2-A. Check with your phone manufacturer for details. 26

30 Browser Browser To access the website, select Browser from the Main Menu. Put the address you would like to access by using the touchpad Main Menu Screen 27

31 Streaming Applications Streaming Application To access the Streaming Application, select Streaming from the Main Menu. The P2-A enables video streaming from selected applications. Please visit the product website for additional information and firmware updates. Main Menu Screen Streaming Screen Streaming applications are accessible after WiFi internet service is established. Most applications require a log-in account. Applications with the mouse icon require the use of touchpad to navigate correctly. 28

32 Streaming Applications Cont. Troubleshooting Application Hangs or Freezes Try clearing the cache (see Settings - Application Manager) Update Required If an update is required, you may be able to obtain it from the product website (through Browser in the Apps ) Poor Video Playback Possible Causes: Poor WiFi Connection Too many open applications More than one Bluetooth device connected 29

33 Connecting to a Bluetooth Device Connecting to Bluetooth: Select the Settings icon (Fig. 2.8). Select the Bluetooth Settings option and navigate to your Bluetooth Device and click on it to connect (Fig. 2.9). The projector features a Bluetooth radio (BT). The Bluetooth radio is designed to connect Bluetooth enabled device, typically a Bluetooth Speaker. The projector supports one Bluetooth device at a time. Fig. 2.8 Fig. 2.9 Please see next page for steps to connect to a Bluetooth device 30

34 Bluetooth Speaker To connect a Bluetooth Speaker Step 1: Access the Bluetooth Menu (Settings Bluetooth) Step 2: Turn on Bluetooth functionality Step 3: Turn on your Bluetooth device and enable discovery. This varies with each device. Some devices require the power switch to be turned ON. Other devices have a Bluetooth icon that is pressed to make the device discoverable Step 4: If your device does not pop up automatically, click on Scan for Devices Step 5: Highlight your device and click OK to connect. Your device should show connecting. If a PIN is asked, try 0000 or 1234 these are the standard PIN codes. If this does not work, check with your device manufacturer for the PIN 31

35 Troubleshooting Disconnecting. It takes seconds for a BT device to connect or disconnect from the system. Failure to wait for this time could result in an improper connection. Check to ensure device is connected in the BT submenu. If the Bluetooth device does not automatically reconnect please go to the Bluetooth settings and press on the device to reconnnect to it. If the device still does not reconnect please press on the icon on the right of the device s name to unpair the device and pair it again. 32

36 Apps All apps can be found and accessed under Apps from the Main Menu. Open an app: Select the Apps icon (Fig. 2.10). The application will open allowing you to select an app you would like to open (Fig. 2.11). Fig Fig

37 Smartphone Mirroring The P2-A employs a HappyCast smartphone mirroring system that is compatible with both Apple Airplay as well as Android systems. Mirroring with an iphone or Apple Device: Select the Mirroring icon (Fig. 2.12). The application will open allowing you to activate Airplay on your iphone or Apple device (Fig. 2.13). Fig Fig

38 iphone Smartphone Mirroring Turning on Airplay Swipe up on your iphone and to access the Airplay option as shown above Select Airplay and turn it on, it will show you the Happy Cast connection. Select it and make sure the mirroring is switched on Projector You should already have the Happy Cast App opened on the projector and it will mirror the Apple device Adjust the settings in the App if necessary * Both Projector and Apple devices should use the same WiFi connection. 35

39 Android Smartphone Mirroring Downloading HappyCast App Please vist this URL: on your Android phone to download Happy Cast. After finishing installing on the phone please open the Happy Cast App and connect to the projector s Happy Cast connection. Projector You should already have the Happy Cast App open on the projector and it will mirror the Android phone. Adjust the settings in the app if necessary. * Both Projector and Android smartphone should use the same WiFi connection. 36

40 Office Menu Microsoft Office and Adobe PDF Documents Microsoft Office and Adobe PDF Documents can be viewed with the document viewer. To access the document viewer, select Office from the Main Menu. Main Menu Screen 37

41 Viewing Office Documents Cont. Choosing Documents to View In the Office application, select Folders or Cloud Storage to view the files you wish to see. Office Main Menu Office Viewer Application Documents from the TF Card and USB Drive can be viewed. Documents from Dropbox with accounts connected may be viewed. Supported file formats include *.DOC, *.XLS, *.PPT, *.PDF. Some file versions may not be compatible and file names must be alphanumeric only. Note: While some Cloud Storage features may work, this functionality is not intended to be supported 38

42 Viewing Office Documents Cont. Step 1: Open Office Step 2: Select Source 39

43 Viewing Productivity Documents Cont. Step 3: Highlight the Office File and click OK Step 4: The file should display automatically Note: For a more comprehensive user guide please visit our FAQ section or search online for Kingsoft WPS Office Viewer user guide Need help with the document viewer? Please us at pro_support@aaxatech.com 40

44 Settings Menu Chapter 3 The Settings Menu can be accessed by selecting Settings on the Main Menu Within the Settings Menu, there are eight submenus that allow you to customize your P2-A. Application Manager Network Settings Bluetooth Settings System Settings Backup & Reset Projector Settings About Language Settings 41

45 Application Manager Application Settings The Application Manager allows the management of onboard applications. The primary purpose of the Application Manager is to reset or remove existing apps 1. Clearing the App Data/Cache Clearing the App cache is sometimes necessary to remove corrupted information and reset old logins 2. Force Stop If an application is misbehaving use this function to stop the application 3. Uninstall Use this function to uninstall unwanted applications 4. Move to TF Card This feature is disabled and unsupported App Manager Menu Gmail 42

46 Network Settings Network Settings Please see Connecting to WiFi section on Page 6 Click the 3 vertical points on the top-right corner and choose from Add network, Saved network, Refresh, and Advanced to adjust WiFi settings Within Advanced Network Notification- Choose whether to notify when a public internet is available Scanning always available - Choose whether to scan for networks all the time Keep WiFi on during sleep - Selection from Always, Only when plugged in, Never, and WiFi intelligent sleep WiFi Direct- This feature has been disabled Network Settings 43

47 Bluetooth Settings Bluetooth Settings For Bluetooth Connectivity please see the Bluetooth (BT) page (Page 31) Bluetooth Enable On/Off After clicking the 3 vertical points on the top-right corner, there are three functions that can be chosen: Refresh, Rename the device, and Show received files The projector is visible to nearby devices while Bluetooth settings are open Bluetooth Settings 44

48 System Settings All settings can be found through System Settings Wireless & Networks - WiFi and Bluetooth Device - Display, Projection, Sound & Notification, Storage, Battery, Apps, and Screenshot Setting Personal - Location, Security, Accounts, Language & Input, and Backup & Reset System - Date & Time, Accessibility, and About Device 45

49 Backup & Reset Back Up My Data Back up app data, WiFi passwords, and other settings to Google servers. Backup Account Set a backup account to backup the data. Automatic Restore Use this function to allow the automatic restore when reinstalling an app. Factory Data Reset Erase all data on the device. Backup & Reset 46

50 Projector Settings Brightness It allows the selection of different brightnesses as a result among front Standard, Eco, Bright. Colortemp It allows the selection of different color temperatures as a result among Warm, Standard, Cold. Projection It allows the selection of different viewing orientations as a result among front projection, rear projection, inverted front projection and inverted rear projection. 47

51 About The About displays the basic information of the projector which includes: Status Legal Information Regulatory Information Model Number Android Version Android Security Patch Level Baseband Version Kernel Version Build Number About 48

52 Language Settings Language Settings Selecting a Language: The projector supports more than 30 languages Keyboard & Input Method: The input method is a standard AOSP English keyboard Physical Keyboard: CHESEN PS2 to USB Converter Trackpad: Pointer speed is adjustable Language Settings 49

53 Technical Details Chapter 4 Troubleshooting IMAGE IS BLURRED Possible Causes The Projector is not in focus Solution Adjust the focus with the focus adjustment dial until the image comes into focus The Projector is offset from plane / angle of operation Move the projector so that it is both 180 degrees and on an even plane with the screen NO SYNC, NO SIGNAL Be sure to setup the computer to enable a video signal output. On some laptops this is done by pressing and holding Function F5 key. If using the P2-A as an external monitor on Windows based systems, this can be done by selecting extend my desktop to this monitor. The native resolution of the P2-A projector is 854x480 (WVGA). Depending on the video driver different resolutions may need to be selected for proper output 50

54 Technical Details Cont. Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes There is no power The power button was not held long enough NO PICTURE / FILE NOT SUPPORTED Possible Causes The video source is not properly connected or selected Solution Check to ensure the power outlet source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector. Confirm that the unit is charged and has enough power To power on the projector, the power button needs to be pressed for a full 3 seconds. Try holding the power button until the optical engine turns on Solution Check the video source signal to ensure that it is properly connected. Select the current input source by choosing the input desired from the main menu Incorrect file extension / Video is encoded with incorrect codec Please refer to Specifications page to see which file types and codec are supported. Verify that the file was encoded properly 51

55 Specifications Brightness: Max Resolution: Native Resolution: Contrast Ratio: Aspect Ratio: Projection Lens: Image Size: Lamp: Video in: Audio Out: Color: TF Card: USB: Dimensions: Weight: Power Consumption: Battery Life: Supported File Formats: Conformances: Android Operating System: Processor: RAM: Onboard Storage: WiFi: Bluetooth: 130 Lumens 1920x1080 (1080P) 854x480 (WXGA) 1000:1 16:9 Manual Focus 8~100 inches Triple RGB LEDs with Vibrant Color Technology Life 20,000hrs Composite A/V (3.5mm Jack) Digital Input (Mini) (compatible) 3.5 mm audio jack White / Gray (special order only) TF Card Slot (32GB maximum) Full Size USB 2.0 (32GB maximum) 2.8 x 2.8 x oz 11 W 150 Minute Li-Ion Rechargeable Battery MP3, WMA, OGG, WAV, AVI, BMP, JPG,TXT, GIF, XLS, PPT, DOC, PDF CE, FCC Class A Lollipop Quad-Core ARM Cortex 1.3 ghz 1GB 8GB b/g/n

56 Notes 53

57 Please direct all customer service inquiries to: AAXA Technologies, Inc Mitchell N., Unit #B Irvine, CA (714)