MF-RHT Series - High Temperature PTC Resettable Fuses
|
|
- Malcolm Perkins
- 5 years ago
- Views:
Transcription
1 *RoHS and EC-Q200 COMPLINT RH S Features Compliant wit EC-Q200 Rev-C- Stress Test Qualification for Passive Components Operating temperature range up to 125 C Low termal derating factor Higer old currents at elevated temperature Coice of operating currents RoHS compliant* and alogen free** Resettable fault protection of general electronic equipment Electrical Caracteristics Model V Volts I mps I old I trip Resistance mperes Oms mperes Max. Time To Trip Seconds Tripped Power Dissipation Watts R Hold Trip R 1Max. Min. (Post Trip) Max. Typ. MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT200/ MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT Environmental Caracteristics Operating Temperature C to +125 C Storage Temperature C to +85 C Passive ging C, 1000 ours... ±5 % typical resistance cange Humidity ging C, 85 % R.H ours... ±5 % typical resistance cange Termal Sock... MIL-STD-202, Metod ±10 % typical resistance cange +125 C to -40 C, 10 cycles Vibration... MIL-STD-883C, Metod ,... No cange Condition Moisture Sensitivity Level (MSL)... Level 1... Class 6 Test Procedures nd Requirements For Model MF-RHT Series Test Test Conditions ccept/reject Criteria Visual/Mec.... Verify dimensions and materials... Per MF pysical description Resistance... In still 23 C... Rmin R R1max Time to Trip T time to trip (seconds) Hold Current min. at Iold... No trip Trip Cycle Life... Vmax, Imax, 100 cycles... No arcing or burning Trip Endurance... Vmax, 48 ours... No arcing or burning Solderability... MIL-STD-202, Metod % min. coverage WRNING Cancer and Reproductive Harm * RoHS Directive 2015/863, Mar 31, 2015 and nnex. ** ourns considers a product to be alogen free if (a) te romine (r) content is 900 ppm or less; (b) te Clorine (Cl) content is 900 ppm or less; and (c) te total romine (r) and Clorine (Cl) content is 1500 ppm or less. Te products described erein and tis document are subject to specific legal disclaimers as set fort on te last page of tis document, and at
2 pplications Protection of circuitry including engine control modules Overcurrent surge protection of electronic equipment required to operate at ig operating temperature ranges Resettable fault protection of general electronic equipment Termal Derating Cart - Iold (mps) Model mbient Operating Temperature -40 C -20 C 0 C 23 C 40 C 50 C 60 C 70 C 85 C 125 C MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT200/ MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT How to Order MF - RHT 200 / Typical Part Marking Represents total content. Layout may vary. Multifuse Product Designator Series RHT = Hig Temperature Radial Leaded Component Hold Current, Iold ( mps) Higer Voltage Option lank = Standard Voltage /32 = 32 Volts Packaging Options lank = ulk Packaging - 2 = Tape & Reel* - P = mmo-pak* PRT IDENTIFICTION RH S DTE CODE (FIRST DIGIT = LST DIGIT OF YER; NEXT THREE DIGITS = DY OF YER) EXMPLE: 7180 = 2017 DY 180 MNUFCTURER'S TRDEMRK COUNTRY OF MNUFCTURE (S = CHIN) - 14 = Kinked Leads in Place of Std. Straigt Leads - 17 = Straigt Leads in Place of Std. Kinked Leads *Packaged per EI 486-
3 Product Dimensions Model MF-RHT050 MF-RHT070 MF-RHT100 MF-RHT200 MF-RHT200/32 MF-RHT300 MF-RHT400 MF-RHT450 MF-RHT500 MF-RHT550 MF-RHT600 MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 C D E F Pysical Caracteristics Max. Max. Nom. Tol. ± Min. Max. Nom. Style Material (0.291) (0.500) (0.201) (0.028) (0.30) (0.12) (0.020) (0.27) (0.425) (0.201) (0.028) (0.30) (0.12) (0.020) 1 Sn/CuFe (0.382) (0.535) (0.201) (0.028) (0.30) (0.12) (0.020) (0.37) (0.55) (0.201) (0.028) (0.30) (0.12) (0.020) (0.37) (0.55) (0.201) (0.028) (0.30) (0.12) (0.020) (0.35) (0.55) (0.201) (0.028) (0.30) (0.12) (0.032) (0.394) (0.591) (0.201) (0.028) (0.30) (0.12) (0.032) (0.41) (0.61) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.744) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.744) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.827) (0.201) (0.028) (0.30) (0.12) (0.032) (0.50) (0.88) (0.201) (0.028) (0.30) (0.12) (0.032) (0.55) (0.862) (0.201) (0.028) (0.30) (0.12) (0.032) (0.55) (0.93) (0.201) (0.028) (0.30) (0.12) (0.032) (0.65) (0.88) (0.201) (0.028) (0.30) (0.12) (0.032) (0.65) (1.012) (0.201) (0.028) (0.30) (0.12) (0.032) (0.689) (0.51) (0.402) (0.028) (0.30) (0.12) (0.032) (0.65) (0.88) (0.402) (0.028) (0.30) (0.12) (0.032) (0.925) (1.17) (0.402) (0.028) (0.30) (0.14) (0.040) Packaging: ULK: MF-RHT050~MF-RHT800 = 500 pcs. per bag; MF-RHT900~MF-RHT1300 = 250 pcs. per bag TPE & REEL: MF-RHT050~MF-RHT400 = 3000 pcs. per reel; MF-RHT450~MF-RHT700 = 1500 pcs. per reel; MF-RHT750~MF-RHT1300 = 1000 pcs. per reel 0.51 (24WG) 0.81 (20WG) 1.0 (18WG) DIMENSIONS: MM (INCHES) MMO-PCK: MF-RHT050~MF-RHT400 = 2000 pcs. per pack; MF-RHT450~MF-RHT900 = 1000 pcs. per pack, MF-RHT1000~MF-RHT1300 = 500 pcs. per pack E E E lso available wit kinked and straigt leads in place of standard leads (see How to Order). D D D C F C F C F
4 Typical Time to Trip at 23 C MF-RHT600 MF-RHT550 MF-RHT500 MF-RHT450 MF-RHT400 MF-RHT300 MF-RHT200, MF-RHT200/32 MF-RHT MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 MF-RHT MF-RHT050 Time to Trip (Seconds) Fault Current (mps) Te Time to Trip curves represent typical performance of a device in a simulated application environment. MF-RHT SERIES, REV. N, 11/18
5 MF-RHT Series Tape and Reel Specifications Devices taped using EI468 /IEC standards. See table below and Figures 1 and 2 for details. IEC EI Dimensions Dimension Description Mark Mark Dimensions Tolerance Carrier tape widt W W /+1.0 (.709) (-0.02/+.039) 11 Hold down tape widt W 0 W 4 (.433) min. Hold down tape No protrusion 3 Top distance between tape edges W 2 W 6 (.118) 9-0.5/+0.75 Sprocket ole position W 1 W 5 (.354) (-0.02/+0.03) 4 ±0.2 Sprocket ole diameter D 0 D 0 (.157) (±.0078) bscissa to plane (straigt lead) H H 18.5 ±3.0 (.728) (±.118) 16 ±0.5 bscissa to plane (kinked lead) H 0 H 0 (.63) (±.02) bscissa to top: MF-RHT050 ~ MF-RHT450 H 1 H (1.268) bscissa to top: MF-RHT500 ~ MF-RHT1300 H 1 H (1.837) 42.5 Overall widt w/lead protrusion: MF-RHT050 ~ MF-RHT450 C 1 (1.673) 55.0 Overall widt w/lead protrusion: MF-RHT500 ~ MF-RHT1300 C 1 (2.165) 42.5 Overall widt w/o lead protrusion: MF-RHT050 ~ MF-RHT450 C 2 (1.673) 54.0 Overall widt w/o lead protrusion: MF-RHT500 ~ MF-RHT1300 C 2 (2.126) 1.0 Lead protrusion I 1 L 1 (.039) Protrusion of cutout L L 11 (.433) Protrusion beyond old-down tape I 2 I 2 Not Sprocket ole pitc P 0 P ±0.3 (0.5) (±.012) Pitc tolerance 20 consecutive ±1 (±.039) Device pitc 25.4 ±0.6 (1.0) (±.024) Tape tickness t t 0.9 (.035) 1.5 Tape tickness wit splice: MF-RHT050 ~ MF-RHT200 t 1 (.059) 2.3 Tape tickness wit splice: MF-RHT300 ~ MF-RHT1300 t 1 (.091) Splice sprocket ole alignment 4.0 ±0.2 (.157) (±.008) ody lateral deviation Δ Δ 0 ±1 (±.039) ody tape plane deviation Δ p Δ p 0 ±0.3 (±.012) Ordinate to adjacent component lead P 1 P ±0.07 (.015) (±.028) DIMENSIONS: MM (INCHES)
6 MF-RHT Series Tape and Reel Specifications IEC EI Dimensions Dimension Description Mark Mark Dimensions Tolerance Lead spacing: MF-RHT050 ~ MF-RHT900 F F /+0.8 (0.2) (-0.006/+0.031) Lead spacing: MF-RHT1000 ~ MF-RHT1300 F F /+0.8 (0.402) (-0.006/+0.031) 56 Reel widt: MF-RHT050 ~ MF-RHT450 w W 2 (2.20) 63.5 Reel widt: MF-RHT500 ~ MF-RHT1300 w W 2 (2.50) Reel diameter d a (14.57) Space between less device W ±3.25 (.187) (±.128) rbor ole diameter f c 26.0 ±12.0 (1.02) (±.472) Core diameter n 80.0 (3.15) ox (2.44) (14.0) (13.6) Consecutive missing places 3 Empty places per reel Not Taped Component Dimensions - Figure 1 p p Reference plane H 1 P 1 L F H H 1 W 0 H 0 W1 W I 2 I 1 P 0 D 0 User direction of feed Cross section - DIMENSIONS: MM (INCHES) Reel Dimensions - Figure 2 t Reel f d User direction of feed Upper side Tape Lower side w
7 Legal Disclaimer Notice Tis legal disclaimer applies to purcasers and users of ourns products manufactured by or on bealf of ourns, Inc. and Unless oterwise expressly indicated in writing, ourns products and data seets relating tereto are subject to cange and complete before placing orders for ourns products. Te caracteristics and parameters of a ourns product set fort in its data seet are based on laboratory conditions, and statements regarding te suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. Te caracteristics and parameters of a ourns product wit oter components te actual performance of te ourns product as meeting te requirements of a particular industry of ourns products are responsible for ensuring compliance wit safety-related requirements and standards applicable to ourns on a case-by-case basis, use of any ourns ourns standard products tat are suitable for use in aircraft standard te user s sole risk. custom products sall be negotiated on a case-by-case basis by ourns and te user for wic suc ourns standard products sall also apply to suc ourns custom products. Users sall not sell, transfer, export or re-export any ourns ourns products and ourns tecnology and tecnical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. ourns products may not, witout bilingual versions are available at: Web Page: ttp:// PDF: ttp://
MF-MSMF Series - PTC Resettable Fuses
*RoHS & AE OMPLIANT Features n ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents in Automotive Applications n 00 % electrically compatible with all previous generations of 8 SMT
More informationBOURNS THYRISTOR SURGE PROTECTOR PRODUCTS SMB (DO-214AA)
BOURNS THYRISTOR SURGE PROTECTOR PRODUCTS PACKAGE MECHANICAL INFORMATION SMB (DO-214AA) Package Outline Dimensions This surface mount two terminal package consists of a circuit mounted on a lead frame
More informationDCR. Irms (A) Isat (A) Max.
*RoHS & AEC COMPLIANT 1R 5 Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 33 µh AEC-Q2 compliant RoHS compliant* and halogen free** SRP728A Series -
More informationFeatures Shielded construction Flat wire Unit height of 2 mm Inductance range: 0.22 to 5.6 μh Rated current up to 10 A RoHS compliant* DCR.
*RoHS COMPLIANT R68 Features Shielded construction Flat wire Unit height of 2 mm Inductance range:.22 to 5.6 μh Rated current up to 1 A RoHS compliant* This series is currently available but not recommended
More informationI rms (A) Typ. DCR (mω) Typ. DCR (mω) Max. 0.7 ± 0.2 (.028 ±.008)
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q COMPLIANT Features Shielded construction Metal alloy powder core High saturation current Inductance range.15 to 1 µh AEC-Q compliant RoHS compliant* and halogen
More informationSRR1210A Series - Shielded Power Inductors
*RoHS COMPLIANT & AEC-Q QUALIFIED Features Shielded construction Inductance range: to μh Heating current up to 11 A Dimensions: 12 x 12 x 10 mm AEC-Q qualified RoHS compliant* and halogen free** SRR1210A
More informationTBU-DT Series - TBU High-Speed Protectors
Features n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n RoHS compliant* n Agency listing: Applications
More informationPTVS10-086C-M High Current TVS Diode
Features n 1 ka, 8/2 µs surge capability n 1 ka, 1/35 μs surge capability n Low clamping voltage under surge n Bidirectional TVS n Surface mount package Applications n High power D bus protection PTVS1-86-M
More informationIEEE 1394B. Firewire / ilink Protection
SOLUTIONS IEEE 1394 Firewire / ilink Protection Solution Products MF-SM150/33-2 G0603MLU-05E Objective IEEE 1394 is an 800 Mb serial data port with 30 V, 1.5 capability. IEEE 1394 requires short circuit
More informationCDDFN P - Surface Mount TVS Diode Array
Features n RoHS compliant* n Low capacitance -.4 pf (I/O to I/O) n ESD protection to IEC 61-4-2 (Level 4) Applications n HDMI 1.3, 1.4 and 2. n DisplayPort n Digital Visual Interface (DVI) n SATA and esata
More informationFast Acting PTC Resettable Fuse SMD - Case Style 0603
Features: Compact design to save board space-0603 footprint. Small size results in very fast time to react to fault events. Low profile. Halogen free. Applications: USB port protection. PC motherboards
More informationPM600/PM610/PM620 Series - SMD Inductor/Transformer
*ohs COMPLIANT Features Formerly model Six windings - multiple configurations Compact size Tape and reel packaging ohs compliant* Applications Inductors: Buck-boost, coupled, filtering, common mode Transformers:
More informationPTS Volt DC surface mount resettable PTC devices
Technical Data 4398 Supersedes pril 2013 6-60 Volt DC surface mount resettable PTC devices Pb HLOGEN HF FREE Product features Positive Temperature Coefficient (PTC) SMT resettable device Low resistance
More informationSemiteh Electronics. SMD1206 HF Series Surface Mount PTC Devices. SMD1206 HF Series APPROVAL SHEET. MODEL NO.: SMD1206 Series CUSTOMER:
APPROVAL SHEET MODEL NO.: SMD1206 Series CUSTOMER: CUSTOMER'S APPROVAL: AUTHORIZED SIGNATURE/STAMP DATE Surface Mount PTC Devices 1/7 Performance Specification Maximum Model Mar Resistance V max Imax I
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationLP-SM Series. Features. Product Dimensions. Size 7555mm/2920 mils. Small size of 2920/3425. Fast tripping resettable circuit protection
LP-SM Series Surface-mount devices Features Small size of 2920/3425 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Product s Size
More informationFeatures U-DFN Pin Description (Top View)
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5.5V 3.5A 0.45pF Description The is a high-performance device suitable for protecting four high speed I/Os. These
More informationµclamp3321za Ultra Small µclamp 1-Line, 3.3V ESD Protection PROTECTION PRODUCTS - µclamp Description Features Mechanical Characteristics Applications
- µclamp Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latc-up due to ESD. Tey are designed to replace 1 size multilayer varistors (MLVs) in portable applications
More informationPackaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
More informationSpecification Status: RELEASED
PAGE NO.: 1 OF 6 Specification Status: RELEASED BENEFITS Low capacitance; provides low insertion loss for high speed data signals Small size ESD protection diodes for high speed data signals (0201 size
More informationTBU-PL Series - TBU High-Speed Protectors
*RoHS COMPLIANT Features Superior circuit protection Overcurrent & overvoltage protection Blocks surges up to rated limits High-speed performance Small SMT package RoHS compliant* Agency recognition: Applications
More informationBPS110 Series - 12 mm Analog Low Pressure Sensor
Features n Compensated analog output n Ultra-low pressure sensing n Gauge and differential types n For use in clean, dry air and non-corrosive gas environments n Tape and reel packaging n RoHS compliant*
More informationAOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
More informationFeatures. Bottom View
2 CHANNEL LOW CAPACITANCE CSP TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Max) 6V 5.5A.75pF Description This new generation TVS is designed to protect sensitive electronics from the damage
More informationUltra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package
VBUS5B1-SD Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package FETURES Ultra compact CLP63 package 22543 22544 MRKING (example only) 1.3 XY 1 = year
More informationKnowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Zero Height SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Zero Height Surface Mount Silicon Microphone 1.2
More informationSpecification Status: RELEASED
PAGE NO.: 1 OF 6 BENEFITS Specification Status: RELEASED Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Small size ESD protection diodes for high speed
More informationFeatures. Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity DT1240A-08LP Standard MW ,000/Tape & Reel
8 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5V 5.5A 0.6pF Description The is a high-performance device suitable for protecting four high-speed I/Os. These
More informationSpecification Status: RELEASED
PAGE NO.: PAGE 1 of 6 Specification Status: RELEASED BENEFITS Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Industry s smallest footprint and lowest profile
More informationTransient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More informationType 168/185 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel
More informationFactory Installed Panel Mount
Factory Installed Panel Mount TRIMPOT POTENTIOMETER PANEL MOUNTING OPTIONS AND HARDWARE Many Trimpot Potentiometers are available for panel mount application. Models RT12/RJ12, 3057/3059 Models 3005/3006/3009
More informationFUZETEC TECHNOLOGY CO., LTD.
NO. PQ18-29E Product Specification and Approval Sheet Version A6 Page 1/5 Surface Mountable PTC Resettable Fuse: Low Rho FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationTBU-DT Series - TBU High-Speed Protectors
*RoHS COMPLIANT Features n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n RoHS compliant* n Agency
More informationGeneral Purpose Metallized Polyester Film Capacitors RSB Series, mm Lead Spacing, VDC. Applications
General Purpose Metallized Polyester Film Capacitors RSB Series, 5 37.5 mm Lead Spacing, 50 630 VDC Overview The RSB Series is constructed of metallized stacked polyester film capacitor with radial leads
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More informationCDDFN P - Surface Mount TVS Diode Array
*RoHS COMPLIANT Features n RoHS compliant* n Low capacitance - 0.5 pf n ESD protection >15 kv Applications n HDMI 1.4 n Digital Visual Interface (DVI) n USB 3.0 / USB OTG n Memory protection n SIM card
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More informationVaristor Products Radial Lead Varistors > TMOV and itmov Series
RoHS Description The Littelfuse TMOV and itmov thermally protected varistors represent a new development in integrated circuit protection. Both versions are comprised of radial leaded MOVs (Metal Oxide
More informationFeatures. Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel D5V0P4UR6SO-7 Standard DE ,000/Tape & Reel
YM ADVANCE INFORMATION CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C T (Typ).5V 5A.1pF Description The is a high-performance device suitable for protecting four high-speed
More informationDC/DC Converters. TSM Series, 1 Watt. Features. Models
TSM Series, Watt Features SMD package (SOIC-4/8) Construction in lead frame technology Isolated single and dual output I/O isolation 000 VDC High efficiency Operating temperature 40 C to +85 C Reflow solder
More information1.8mm Round Subminiature Silicon PIN Photodiode PD42-21B/TR8
Features Fast response time High photo sensitivity Small junction capacitance Package in 12mm tape on 7 diameter reel Pb free The product itself will remain within RoHS compliant version. Compliance with
More informationCR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 70 C: CR0603-0.10 W, CR0805-0.125 W, CR1206-0.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three
More informationAOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications
Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance
More informationSmall Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
More informationDATA SHEET METAL LOW OHMIC JUMPER PA series
Product specification October 05, 2018 V.0 DATA SHEET METAL LOW OHMIC JUMPER PA series sizes 0201/ 0402/ 0603/ 0805 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) 25 C VALUE 8 x 8 x 0 to 8 x 8 x 2 Rated capacitance range, C R 0
More informationSOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
More information1206 Package Chip Phototransistor PT15-21B /TR8
Features Fast response time High photo sensitivity Small junction capacitance Package in 8mm tape on 7 diameter reel Pb free The product itself will remain within RoHS compliant version. Compliance with
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all data
More informationPLRO1206 Series POLYMER PTC DEVICE DESCRIPTION PTC DEVICE APPLICATIONS FEATURES ENVIRONMENTAL SPECIFICATIONS MECHANICAL CHARACTERISTICS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationAPPLICATIONS ELECTRICAL SPECIFICATIONS. MAXIMUM FAULT CURRENT (Note 4) I MAX AMPS. MAXIMUM INTERRUPT VOLTAGE (Note 3) V MAX VOLTS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More information200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
More informationSpecification Status: RELEASED
PAGE NO.: PAGE 1 of 6 BENEFITS Specification Status: RELEASED Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Small size ESD protection diodes for high speed
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
More information4-Line BUS-Port ESD Protection Array - Flow Through Design
-Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code month YY = date code year DESIGN SUPPORT TOOLS click logo to get started Models Available 1 YY
More informationPMPS Description. ptc device. applications
polymer ptc device Description Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationI/O 4 NC I/O 3 I/O 1 V SS I/O 2
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Low Clamping Voltage Typical 9V at 10A 100ns, TLP Typical 9V at 10A 8μs/20μs IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kV IEC 61000-4-4 (EFT): 60A(5/50ns,
More information19S-117ZUTD/S3353/TR8
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. ESD protection.
More informationCeramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 V DC, 100 V DC, 500 V DC
Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 V DC, 100 V DC, 500 V DC FEATURES High capacitance with small size High reliability Crimp and straight lead styles
More informationPESD0402MS05 Surface Mount Polymeric ESD Suppressor
\ Description polymeric ESD suppressor help protect sensitive electronic equipment against electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More informationR0.5S_D ECONOLINE. Features. 0.5 Watt SMD Isolated Single or Dual Output. Derating-Graph (Ambient Temperature) DC/DC-Converter with 3 year Warranty
Features Unregulated Converter 1 : 1 Input Range.W SMD Package Efficiency up to 8% Approved for Medical Applications 1kVDC and 3 kvdc Isolation Option Operating Temperature from -4 C to +1 C with 3 year
More information27-21/Y2C-AP1Q2L/3C SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationSMD B Z/T1D-CP2Q2HY/3T
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. ESD Protection.
More informationPart Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
More information500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
More informationPolySwitch Resettable Devices Telecommunications & Networking Devices
This family of telecommunication and networking devices was initially designed to meet the growing demand for resettable overcurrent protection. These product families help provide protection against damage
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors AEC-Q200 qualified available with PPAP for size
More information1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationFeatures. Applications
Features n Compensated output n Direct-media monitoring n Gauge and absolute types n Isolated onboard electronics n Gold-plated Kovar port option n RoHS compliant* Applications Industrial: n Refrigerant
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More informationPower Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz
MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination
More informationSpecification Status: RELEASED
PAGE NO.: 1 OF 8 Specification Status: RELEASED GENERAL DESCRIPTION TE Circuit Protection PolyZen devices are polymer enhanced, precision Zener diode micro-assemblies. They offer resettable protection
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationHSMF-C127. Data Sheet. Tri-Color Side-View ChipLED. Features. Description. Applications
Data Sheet HSMF-C127 Description The HSMF-C127 is a side-emitting tri-color RGB LED chipled. This surface-mount chipled is available in 3.2-mm 1.5-mm footprint. Its wide viewing angle allows good color
More informationFeatures wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port
Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC
More informationProduct Data Sheet. 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Applications
78-5102-0126-8 B Product Data Sheet 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Supersedes: Rev A Page: 1 of 9 Table of Contents 1.0 DESCRIPTION...2 2.0 AOC BLOCK DIAGRAM...2 3.0 CONNECTOR
More informationFeatures: Package Dimensions: 6. Compatible with automatic placement. Applications: Absolute Maximum Ratings(Ta=25 VSS=0V)
Features: 1. Emitted Color: Red, Green, Blue, 2. Lens Appearance: Water Clear. Package Dimensions: 3. 3.5x2.8x1.9mm standard package. 4. Suitable for all SMT assembly methods. 5. Compatible with infrared
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
More informationmm TACT Switch (Radial)
6.06.0mm Switc () SKHV dovantage in excellent mounting efficiency. Ground terminal rersion is also available. Car Use Package Mount Features Supplied wit radial taping. llows automatic insertion onto PC
More informationLP-MSM Series. Features. Product Dimensions. Size 4532mm/1812 mils. Small size of 1812/4420. Fast tripping resettable circuit protection
LP-MSM Series Features Small size of 1812/4420 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Product Dimensions A B C D E Max.
More informationTBU-DT Series - TBU High-Speed Protectors
*RoHS COMPLIANT Features n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n RoHS compliant* n Agency
More informationDescription. Features. Continuous RA8 Series RA16 Series RA22 Series Units. ) 4 to to to 275 V DC Voltage Range (V M(DC)
RA Varistor Series RoHS Description The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for
More informationVaristor Products Radial Lead Varistors > TMOV and itmov Series
RoHS Description The Littelfuse TMOV and itmov thermally protected varistors represent a new development in integrated circuit protection. Both versions are comprised of radial leaded MOVs (Metal Oxide
More informationApplications VHF/UHF communication receivers & transmitters. INSERTION LOSS (db) ABOVE 4.8 db. ISOLATION (db) Total Loss 1. Amp. Unbal.
Coaxial High Power Combiner 3 Way-0 50Ω 2 to 400 MHz Maximum Ratings Operating Temperature -55 C to 90 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationKnowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Enhanced RF Protected Amplified Mini SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1 of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Mini Surface Mount Silicon
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information2-Line BUS-Port ESD-Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
2-Line BUS-Port ESD-Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 FEATURES Compact LLP113-L
More informationPower Splitter/Combiner
Plug-In Power Splitter/Combiner 5 Way-0 50Ω 1 to 300 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 1W max. Internal Dissipation
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationCZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More information