Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz

Transcription

1 MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination required High power handling (>30dBm) Small Size MCLP 4x4mm CASE STYLE: DG1847 Product Overview Mini-Circuits is a wideband 5-11 GHz, 90 hybrid. It splits an input signal into two output signals with quadrature phase shift between them. It provides low loss, wideband in a small layout size and handles high power with good. Key Features Feature Small Size Low Phase and Amplitude Unbalance Advantages The offers an industry leading combination of size, bandwidth and frequency. The small footprint (4mm x4 mm) allows for reduced parasitics in systems with improved performance and simplified layout. 3.7 deg. and 0.8 db unbalance make this 90 hybrid applicable for use in higher level integrated components such as image reject mixers, single sideband modulators, phase shifters, variable attenuators, and balance amplifiers. High Power Handling Capable of operating up to 32 dbm, MMIC structure of makes this 90 hybrid a robust, rugged product that can be used effectively in either the transmit or receive paths. Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com Page 1 of 4

2 MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz Features Low insertion loss, 0.6 db typ. at 7-9 GHz Good isolation, 19 db typ. at 7-9 GHz Miniature size, 4x4 mm High power handling (>30 dbm) Applications Balanced amplifiers Modulators Attenuator Point to Point Military CASE STYLE: DG1847 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Specifications at 25 C Parameter Min. Typ. Max. Unit Frequency Range MHz Insertion Loss, (Avg. of Mainline & Coupled) above 3dB Isolation Amplitude Unbalance Phase Unbalance (Deviation from 90 ) Input Output (0 &90 ) db db db Degree :1 :1 Maximum Ratings Parameter Ratings Operating Temperature -45 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) Internal Dissipation 32 dbm (5 minute max.) 30 dbm (continuous) 30 dbm Permanent damage may occur if any of these limits are exceeded. Pad Connections Function Pad Number SUM PORT 1 PORT 1 (0 ) 9 PORT 2 (+90 ) 22 NC 2-8, 10-21,23,24 Simplified Electrical Schematic * ESD rating Human body model (HBM): Class 1A(250 to <500 V) in accordance with ANSI/ESD Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com REV. OR M RS/CP Page 2 of 4

3 MMIC Power Splitter/Combiner Outline Drawing Product Marking PCB Land Pattern MCL EPQ113 Suggested Layout, Tolerance to be within ±.002 Lead finish: Matte-Tin Outline Dimensions ( inch mm ) A B C D E F G H J K L M N P Q R wt grams Demo Board MCL P/N: TB Suggested PCB Layout (PL-520) Tape and Reel (F68) Tape Width, mm Device Cavity R eel Size, Devices per Reel Pitch, mm inches see note 20 7 Small quantity standard Standard Standard Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com Page 3 of 4

4 MMIC Power Splitter/Combiner Typical Performance Data Frequency (MHz) Total Loss 1 (db) Amplitude Unbalance (db) Isolation (db) Phase Unbalance (deg.) (:1) S (:1) 1 (:1) 2 S-1 S Total Loss = Insertion Loss + 3dB splitter loss. TOTAL LOSS (db) TOTAL LOSS S-1 (db) S-2 (db) ISOLATION (db) ISOLATION FREQUENCY (MHz) FREQUENCY (MHz) PHASE UNBALANCE (deg.) PHASE UNBALANCE FREQUENCY (MHz) #S- #1- # FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com Page 4 of 4

5 2 Way-90 Power Splitter Typical Performance Data TEST CONDITIONS: INPUT POWER = -10 = +25 C FREQ. TOTAL LOSS (1) (MHz) (db) (db) (deg.) (db) S-1 S-2 AMP. UNBAL. PHASE UNBAL. ISOLATION 1-2 (:1) S (1) Total Loss = Insertion Loss + 3dB Splitter Loss REV. OR 10/11/2017 Page 1 of 3

6 2 Way-90 Power Splitter Typical Performance Data TEST CONDITIONS: INPUT POWER = -10 = -45 C FREQ. TOTAL LOSS (1) AMP. UNBAL. ISOLATION (MHz) (db) (db) (deg.) (db) S-1 S-2 PHASE UNBAL. 1-2 (:1) S (1) Total Loss = Insertion Loss + 3dB Splitter Loss REV. OR 10/11/2017 Page 2 of 3

7 2 Way-90 Power Splitter Typical Performance Data TEST CONDITIONS: INPUT POWER = 0 = +85 C FREQ. TOTAL LOSS (1) (MHz) (db) (db) (deg.) (db) S-1 S-2 AMP. UNBAL. PHASE UNBAL. ISOLATION 1-2 (:1) S (1) Total Loss = Insertion Loss + 3dB Splitter Loss REV. OR 10/11/2017 Page 3 of 3

8 Isolation (db) Amplitude Unbalance (db) Phase Unbalance (deg.) Total Loss (db) Insertion Loss (db) 2 Way-90 Power Splitter Typical Performance Curves 4.5 Total Loss 6.0 Total Loss S-1 vs. TEMPERATURE C Total Loss S-1 Total Loss S Amplitude Unbalance vs. TEMPERATURE 120 Phase Unbalance vs. TEMPERATURE C C Isolation 1-2 vs C REV. OR 10/11/2017 Page 1 of 2

9 (:1) (:1) (:1) 2 Way-90 Power Splitter Typical Performance Curves SUM vs. TEMPERATURE 1.55 S -45 C C OUT1 vs C REV. OR 10/11/2017 Page 2 of 2

10 Case Style Outline Dimensions DG DG1847 PCB Land Pattern Suggested Layout, Tolerance to be within.002 CASE # A B C D E F G H J K DG1847 (4.00) (4.00) (1.00) (0.20) (2.65) (2.65) (0.23) -- (0.40) (0.50) CASE # L M N P Q R WT. GRAM DG (4.22) (4.22) (2.59) (0.31) (0.51) (2.59) Dimensions are in inches (mm). Tolerances: 2 Pl. +.01; 3 Pl Notes: 1. Case material: Plastic. 2. Termination finish: For RoHS Case Styles: Tin-Silver alloy plate over Nickel barrier or Matte-Tin. All models, (+) suffix. See model Data sheet. For RoHS-5 Case Styles: Tin-Lead plate. All models, no (+) suffix. 98-DG Rev.: AF (09/22/17) M File: 98-DG Sheet 13 of 15

11 Tape & Reel Packaging TR-F68 Tape Width, mm 12 8 D evice Cavity R eel Size, Devices per Reel Pitch, mm inches see note 7 Small quantity standard Standard Standard Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: Note: Please Consult individual model data sheet to determine device per reel availability. 98-TR-F68 Rev.: E (07/14/16) M File: 98-TR-F68.doc Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.

12

13

14 Mini-Circuits Environmental Specifications ENV08T2 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -45 to 85 C or -40 to 85 C Ambient Environment Individual Model Data Sheet Storage Temperature -65 to 150 C Ambient Environment Individual Model Data Sheet Thermal Shock -55 to 100 C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100 C Mechanical Shock 1.5Kg, 0.5 ms, 5 shock pulses, Y1 direction only MIL-STD-883, Method 2002, Condition B, except Y1 direction only Vibration (Variable Frequency) 50g peak MIL-STD-883, Method 2007, Condition B Autoclave 15 psig, 100% RH, 121 C, 96 hours JESD22-A102, Condition C HAST 130 C, 85% RH, 96 hours JESD22-A110 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Solder Reflow Heat Moisture Sensitivity: Level 1 Marking Resistance to Solvents Sn-Pb Eutetic Process: 240 C peak Pb-Free Process: 260 C peak Bake at 125 C for 24 hours Soak at 85 C/85% RH for 168 hours, Reflow 3 cycles at 260 C peak Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + J-STD-020, Table 4-1, 4-2 and 5-2; Figure 5-1 J-STD-020 MIL-STD-202, Method 215 ENV08T2 Rev: B 02/10/14 M File: ENV08T2.pdf This document and its contents are the property of Mini-Circuits. Page: 1

15 Mini-Circuits Environmental Specifications ENV08T2 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec monoethanolamine at 63 C to 70 C ENV08T2 Rev: B 02/10/14 M File: ENV08T2.pdf This document and its contents are the property of Mini-Circuits. Page: 2