uarm Conveyor User Manual V1.0.0
|
|
|
- Marlene Phillips
- 5 years ago
- Views:
Transcription
1 uarm Conveyor User Manual V1.0.0 Part Lists Hardware: 1. Conveyor Belt * V Power Adapter * 1 3. Screwdriver * 1 4. Seeed Grove Sensor Cable * 4 5. LCD * 1 6. USB Type C Cord * 2 7. USB Cable * 1 8. Control Board * 1
2 9. uarm Swift Pro Stator * Target Object(Red & Green & Yellow Cube)* uarm 30P Bottom Expansion Plate * uarm Power Cable * Material Slide * Connection Plate * 1 Software: 1. Arduino IDE 2. conveyor_belt.ino for Arduino Mega UArmSwiftPro_2ndUART.hex for uarm 1. Software installation 1) Download the hex 2) Download and extract XLoader. 3) Open XLoader and select your uarm's COM port from the drop down menu on the lower left. 4) Select the appropriate device from the dropdown list titled "Device". 5) Check that Xloader set the correct baud rate for the device: for Mega (ATMEGA2560). 6) Now use the browse button on the top right of the form to browse your hex file. 7) Once your hex file is selected, click "Upload" The upload process generally takes about 10 seconds to finish. Once completed, a message will appear in the bottom left corner of XLoader telling you how many bytes were uploaded. If there is an error, the total bytes uploaded will be shown instead. (Please check if the parameters are the same as shown in the picture below, except COM port may different)
3 2. Hardware installation 1) Install the uarm Stator Fix the uarm stator on the conveyor belt.
4 2) Install Main Control Board Fix the control board on the base of the conveyor belt. 3) Install another uarm Stator Fix another stator on the conveyor belt.
5 4) Install the Material Slide Use the connection plate to connect the stator and material slide. 5) Connect the Ultrasonic Sensor Insert the ultrasonic sensor cable into the D10-D11 port of the control board.
6 6) Connect the Line Finder Insert the line finder cable into the D12-D13 port of the control board. 7) Connect the color sensor Insert the color sensor cable into the IIC port of the control board.
7 8) Connect the LCD Insert the LCD cable into the IIC port of the control board. 9) Connect the Conveyor Belt Insert the conveyor belt motor 8PIN cable into the motor drive port of the control board.
8 10) Install the uarm Swift Pro Place the uarm Swift Pro on the stator tightly. Place the other uarm Swift Pro the same way.
9 11) Connect the COM of uarm Swift Pro Connect the uarm Swift Pro to the control board with the TYPE-C cable. The TYPE-C interface on the left side of the control board is connected to the uarm Swift Pro on the left, and the TYPE-C interface on the right is connected to the uarm Swift Pro on the right. 12) Connect the Power Supply of uarm Swift Pro Link the two uarm Swift Pro to the power terminal.
10 13) Overview 3. Operation 1) Press the uarm power button 2) Use 12V power adapter to power up the whole system 3) Press the reset button of the control panel to reset the system
11 4) Place the color cube on the material slide and wait for uarm to pick it up. 4. Video 5. Firmware Reset In the first step, a special firmware for the conveyor belt is added to the uarm Swift Pro. uarm cannot be controlled using uarm Studio. If you want to control uarm using uarm Studio, please follow the following steps to restore the firmware: 1. Connect the uarm Swift Pro to your computer, open XLoader and load swiftpro3.2.0.hex. 2. Click the "upload" button to upload the hex to uarm Swift Pro. 6. Note The firmware Arduino Mega2560 has been set before it shipped. If the firmware need to be re-written, please refer to the following steps: (1) Download firmware: conveyor_belt.ino for Arduino Mega 2560 (2) Connect Mega2560 to the computer via USB cable.
12 (3) Download External libraries
13 (4) Open firmware in the Arduino IDE and send the firmware to Arduino Mega2560 with the parameters.
uarm Slider User Manual V1.0.0
uarm Slider User Manual V1.0.0 Part Lists Hardware 1. Slider * 1 2. LCD * 1 3. Seeed Grove Sensor Cable * 3 4. Slider Motor 8PIN Cable * 1 5. uarm 30P Bottom Expansion Plate * 1 6. Target Object(Red Cube,Green
Connecting PLH3D-6W Laser Heads to Openbuilds Acro-System: Getting Started Guide
Connecting PLH3D-6W Laser Heads to Openbuilds Acro-System: Getting Started Guide Table of Contents 1. Attaching the Laser Head to the X-Y CNC... 2 2. Connecting the Electronics... 5 3. Installation and
Quick-Start Guide. V Oct / 56
Quick-Start Guide V1.0.15 Oct. 2017 1 / 56 Contents SAFETY INSTRUCTIONS...4 PRODUCT OVERVIEW...6 1.REFERENCE FRAME... 6 2. BUTTONS & INDICATOR LIGHTS... 7 3.EXTENSION DESCRIPTION... 8 HARDWARE INSTALLATION...9
Developer Guide V1.0.3 Sep. 2017
Developer Guide V1.0.3 Sep. 2017 1 / 31 Contents SAFETY INSTRUCTIONS... 3 GENERAL INFORMATION... 4 1.SOURCE FILE... 4 2.REFERENCE FRAME... 4 3.COORDINATE... 5 4.MOUNTING... 6 5. BUTTONS & INDICATOR LIGHTS...
uarm Controller User Manual V
uarm Controller User Manual V.0. 208-2-28 Product Introduction Table of Contents Product Introduction 0 Hardware Installation 05 Hardware Parameters Preset Demo Tutorial Software Installation Github Demo
SeeMeCNC Guides. Step 5: Installing the Firmware. This guide will show you how to install the firmware on your Rostock MAX v3 3D printer.
SeeMeCNC Guides Step 5: Installing the Firmware This guide will show you how to install the firmware on your Rostock MAX v3 3D printer. Written By: geneb 2016 seemecnc.dozuki.com Page 1 of 7 Step 1 Download
Developer Guide V1.0.4 Oct. 2017
Developer Guide V1.0.4 Oct. 2017 1 / 34 Contents SAFETY INSTRUCTIONS... 3 GENERAL INFORMATION... 4 1.SOURCE FILE... 4 2.REFERENCE FRAME... 4 3.COORDINATE... 5 4.MOUNTING... 6 5. BUTTONS & INDICATOR LIGHTS...
Safety Instructions. General Information
Contents SAFETY INSTRUCTIONS... 3 GENERAL INFORMATION... 3 1.Source file... 3 2.Reference frame... 4 3.Coordinate... 5 4.Mounting... 6 5. Buttons & indicator lights... 8 6.Extension description... 9 SPECIFICATIONS...
EARTH PEOPLE TECHNOLOGY. VISIPORT 2 USB To Serial Adapter User Manual
EARTH PEOPLE TECHNOLOGY VISIPORT 2 USB To Serial Adapter User Manual The VisiPort 2 is a USB To Serial Adapter Module that is compact in size and programs any Arduino. It's small size allows it to fit
ROBOTLINKING THE POWER SUPPLY LEARNING KIT TUTORIAL
ROBOTLINKING THE POWER SUPPLY LEARNING KIT TUTORIAL 1 Preface About RobotLinking RobotLinking is a technology company focused on 3D Printer, Raspberry Pi and Arduino open source community development.
How to use the Zduino LEE Module with the Trainer Board
How to use the Zduino LEE Module with the Trainer Board Note: If you are going to use the Arduino/Zduino module for this distance training workshop, please download the Arduino software: 1. Connections
THE COMPLETE ALL IN ONE ROBOT 360 NANO BOT
THE COMPLETE ALL IN ONE ROBOT 360 NANO BOT LINE FOLLOWER FIVE LINE SENSORS FOR SCANNING WHITE OR BLACK LINE OBSTACLE AVOIDER TWO OBSTACLE SENSORS CAN DETECT OBSTACLES AND MEASURE DISTANCE BLUETOOTH CONTROL
ABB MOTORS AND GENERATORS SERVICES, 2018 ABB Ability Smart Sensor Activating and Adding Assets. App Version 6.2.3
ABB MOTORS AND GENERATORS SERVICES, 2018 Activating and Adding Assets App Version 6.2.3 Activating your Smart Sensor 1 2 NOTE: The vibration method is only required for sensors with old firmware versions.
TA0139 USER MANUAL ARDUINO 2 WHEEL DRIVE WIRELESS BLUETOOTH ROBOT KIT
TA0139 USER MANUAL ARDUINO 2 WHEEL DRIVE WIRELESS BLUETOOTH ROBOT KIT I Contents Overview TA0139... 1 Getting started: Arduino 2 Wheel Drive Wireless Bluetooth Robot Kit using Arduino UNO... 1 2.1. What
USER MANUAL ARDUINO I/O EXPANSION SHIELD
USER MANUAL ARDUINO I/O EXPANSION SHIELD Description: Sometimes Arduino Uno users run short of pins because there s a lot of projects that requires more than 20 signal pins. The only option they are left
NXShield Interface Specifications
NXShield Advanced Development Guide v1.0 NXShield Interface Specifications Power Specs: NXShield can be powered from external power supply. Max Power Rating: 10.5 Volts DC Minimum 6.6 Volts DC needed to
IDUINO for maker s life. User Manual. For IDUINO Mega2560 Board(ST1026)
User Manual For IDUINO Mega2560 Board(ST1026) 1.Overview 1.1 what is Arduino? Arduino is an open-source prototyping platform based on easy-to-use hardware and software. Arduino boards are able to read
Megamark Processing 3.0 Setup Guide. Downloading and Installing Processing 3.0
Megamark Processing 3.0 Setup Guide Processing is a flexible software sketchbook and a language for learning how to code within the context of the visual arts. There are tens of thousands of students,
Arduino Uno. Power & Interface. Arduino Part 1. Introductory Medical Device Prototyping. Digital I/O Pins. Reset Button. USB Interface.
Introductory Medical Device Prototyping Arduino Part 1, http://saliterman.umn.edu/ Department of Biomedical Engineering, University of Minnesota Arduino Uno Power & Interface Reset Button USB Interface
IO Expansion Shield User Manual
IO Expansion Shield User Manual 1 Features 3-pin & 4-pin sensor interfaces, supports connecting sensors directly without complicate custom connections XBee module connector WIFI-LPT100 wireless module
Marvin Hookup Guide. Your IoT application with Marvin and MachineQ
Marvin Hookup Guide Your IoT application with Marvin and MachineQ Overview 1. 2. 3. 4. Program Marvin using Arduino, please install via the link on the right>> Send data over LoRa Routing your data through
keyestudio Keyestudio MEGA 2560 R3 Board
Keyestudio MEGA 2560 R3 Board Introduction: Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU, fully compatible with ARDUINO MEGA 2560 REV3. It has 54 digital input/output
Welcome to Apollo. For more information, please visit the website and select Apollo. Default Code
Welcome to Apollo For more information, please visit the website and select Apollo Arduino Pins Default Code D49 LED Digital Pins digitalwrite digitalread pinmode Analog Pins analogread digitalread D33
MEGATRONICS V3.0 QUICK START GUIDE
MEGATRONICS V3.0 QUICK START GUIDE Thank you for purchasing the Megatronics v3.0! This small guide will answer the basic questions on how to connect the board to your 3D printer. For more information visit
IDUINO for maker s life. User Manual. For IDUINO development Board.
User Manual For IDUINO development Board 1.Overview 1.1 what is Arduino? Arduino is an open-source prototyping platform based on easy-to-use hardware and software. Arduino boards are able to read inputs
SWIFT INSTALLATION QUICK START GUIDE
SWIFT INSTALLATION QUICK START GUIDE 1 STOP. Make sure you have completed a Site Survey which includes a Link Test and RF Scan before continuing. REQUIRED TOOLS AND EQUIPMENT TO CREATE MESH NETWORK CR123A
MAKE SURE TO TURN OFF YOUR TRS-80 BEFORE ATTACHING NEWKEY/80 KEYBOARD RIBBON CABLE AND POWER CABLE.
NEWKEY/80 User's Guide v1.4 TRS80 Keyboard Adapter 12/10/2018 Plaid Vest Software, LLC. www.plaidvest.com/newkey80 IMPORTANT NOTE: MAKE SURE TO TURN OFF YOUR TRS-80 BEFORE ATTACHING NEWKEY/80 KEYBOARD
Sanguino TSB. Introduction: Features:
Sanguino TSB Introduction: Atmega644 is being used as CNC machine driver for a while. In 2012, Kristian Sloth Lauszus from Denmark developed a hardware add-on of Atmega644 for the popular Arduino IDE and
Manual. Specifications. Contents. Options
Page 1 ATE-501: USB Input Controller - 8 Inputs The ATE-500/600 series is a range of modular I/O controllers. It uses small standardized boards which allows you to configure the system to your requirements.
SeeMeCNC Guides. RAMBo Control Firmware. This guide will show you how to install the firmware on your SeeMeCNC 3D printer.
SeeMeCNC Guides RAMBo Control Firmware This guide will show you how to install the firmware on your SeeMeCNC 3D printer. Written By: geneb 2018 seemecnc.dozuki.com/ Page 1 of 10 Step 1 Download and Install
Atmel Microprocessor Programming With AVRISPmkii
Atmel Microprocessor Programming With AVRISPmkii Purpose EE 400D - Senior Design Part of Electronics & Control Division Technical Training Series by Nicholas Lombardo October 13, 2015 The purpose of this
Universal CCU CAT-5 Release Notes
BLURB Release Notes Universal CCU CAT-5 Release Notes Release Version: V 1.01.16 Release Date: 10/30/2014 Component Version Hardware -327A PIC 1.01.16 FPGA update not needed in this release New Features
Ks0096 keyestudio CNC Kit / CNC Shield V4.0 + Nano 3.0+3pcs a4988 Driver / GRBL Compatible
Ks0096 keyestudio CNC Kit / CNC Shield V4.0 + Nano 3.0+3pcs a4988 Driver / GRBL Compatible From Keyestudio Wiki Contents 1 Arduino CNC kit / CNC Shield V4.0 + nano 3.0+3pcs a4988 driver / GRBL compatible
This tutorial will show you how to take temperature readings using the Freetronics temperature sensor and an Arduino Uno.
This tutorial will show you how to take temperature readings using the Freetronics temperature sensor and an Arduino Uno. Note that there are two different module types: the temperature sensor module and
Eng.mohammed Albhaisi. Lab#3 : arduino to proteus simulation. for simulate Arduino program that you wrote you have to have these programs :
Lab#3 : arduino to proteus simulation for simulate Arduino program that you wrote you have to have these programs : 1-Arduino C 2-proteus 3- Virtual Serial Port Driver 4-Arduino library to proteus You
MilCandy. Release date: 9/20/2015. Version: 1.0. Wiki:
MilCandy Release date: 9/20/2015 Version: 1.0 Wiki: http://www.seeedstudio.com/wiki/milcandy Bazaar: http://www.seeedstudio.com/depot/milcandy-the-easiest-grove-controller-p- 1104.html 1 Document Revision
Centurion C4 Transfer Guide using C4 File Transfer Utility
1010536 2011-02-23 Section 50 Centurion C4 Transfer Guide using C4 File Transfer Utility 1.0 Background 1.1 A valid configuration is required for the Centurion system. Configuration files are downloaded
Communication Shield user manual
Communication Shield user manual INTRODUCTION Arduino is a good platform for open source hardware and can be used in many applications. Thus a lot of electronic modules would be used in this platform,
Using Arduino Boards in Atmel Studio 7
Using Arduino Boards in Atmel Studio 7 Sepehr Naimi www.nicerland.com 12/17/2017 Contents Introduction... 3 Installing Atmel Studio and Making the First Project... 3 Downloading Avrdude... 3 Checking COM
Hackaday Fubarino Contest Entry. Project: Bluetooth PC Remote Power Switch (Prototype) Description:
Hackaday Fubarino Contest Entry Project: Bluetooth PC Remote Power Switch (Prototype) Description: This projects goal is to create a remote power switch for a computer. Instead of using WoL or other remote
1.4 MConfig PC software can be optionally used to upload/download configuration settings to the VRU Pro using RS-485 communication.
FW Murphy VRU Pro Configuration Guide using MConfig v1.60 February 18, 2016 1.0 General Information 1.1 All VRU Pro controllers have firmware that controls the operation of the controller. The latest version
MKS-BASE. MKS BASE is a feature rich all-in-one electronics solution for Reprap and other CNC
MKS-BASE Overview MKS BASE is a feature rich all-in-one electronics solution for Reprap and other CNC devices. It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers.
TA0297 WEMOS D1 R2 WIFI ARDUINO DEVELOPMENT BOARD ESP8266
TA0297 WEMOS D1 R2 WIFI ARDUINO DEVELOPMENT BOARD ESP8266 Contents 1. Overview TA0297... 3 2. Getting started:... 3 2.1. What is WeMos D1 R2 Wifi Arduino Development Board?... 3 2.2. What is IDUINO UNO?...
Pricing and availability (August 2016) (pricing and specifications subject to change) *** DOWNLOAD ONLY VERSION NOW AVAILABLE (see below) ***
GVG2ATEM Controller Kit Pricing and availability (August 2016) (pricing and specifications subject to change) *** DOWNLOAD ONLY VERSION NOW AVAILABLE (see below) *** There are 2 different controller model
DEVELOPMENT OF AN OPEN TYPE CNC SYSTEM FOR A 3-AXIS MICRO CNC MACHINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 6, June 2017, pp. 463 470, Article ID: IJMET_08_06_048 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=6
Manual. NB-IoT workshop. Sodaq Date: Author: Jan van Loenen
Manual NB-IoT workshop Sodaq Date: 07-03-2018 Author: Jan van Loenen Unboxing 3 Installation 4 Arduino IDE 4 Add Boards 5 Libraries 6 Blink 7 NB-IoT 9 AT commands 10 All Things Talk 12 Sensors on the NB-IoT
Verifone MX800 Series Pinpad Serial Installation
One Blue Hill Plaza, 16 th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Verifone MX800 Series Pinpad Serial Installation Note: No drivers
PIGGY V2 User Manual Please contact us if you need further assistance:
PIGGY V2 User Manual Please contact us if you need further assistance: Tech support: tech@furiousfpv.com Sales support: sales@furiousfpv.com Website: http://furiousfpv.com/ I. Specifications: - Item name:
Please note that you may lose your previous settings when you upgrade your software. We advise that you write them down before starting the update.
Software Updates for the iscan VP30 The iscan VP30 software can be updated using a PC with a serial port or a USB port (with a USB-to-Serial adapter). We recommend a serial port terminal program called
Rover 5. Explorer kit
Rover 5 Explorer kit The explorer kit provides the perfect interface between your Rover 5 chassis and your micro-controller with all the hardware you need so you can start programming right away. PCB Features:
BASIC MARLIN FIRMWARE CONFIGURATION USER GUIDE FOR THE SMARTRAP 3D PRINTER WITH LCD
INTRODUCTION: This is a basic user guide on how to verify and/or modify the settings in the Marlin firmware for use with the RepRap SmartRap 3D printer. There are several settings not covered in this manual
Arduino Dock 2. The Hardware
Arduino Dock 2 The Arduino Dock 2 is our supercharged version of an Arduino Uno R3 board. These two boards share the same microcontroller, the ATmel ATmega328P microcontroller (MCU), and have identical
This is the procedure to use the Clone module as a serial converter: To enable communication you must set the following parameters in the drive.
AC10 Clone module 1002-00-00 There are a number of different ways in which the Clone Module can be used with AC10 drive. It can be used to Clone a drive or it can be used as a USB to serial converter to
Intel Do-It-Yourself Challenge Lab 1: Intel Galileo s Arduino side Nicolas Vailliet
Intel Do-It-Yourself Challenge Lab 1: Intel Galileo s Arduino side Nicolas Vailliet www.intel-software-academic-program.com paul.guermonprez@intel.com Intel Software 2014-02-01 Prerequisites and objectives
USB Programming (with Bootloader) PICado Mega
Programming over USB direct from: AtmelStudio Arduino IDE 2017 PICado.ch, Jan Ritschard Page 1 of 10 Table of Contents 1. Installation... 3 1.1. Arduino IDE... 3 1.2. PICado / Arduino IDE modification...
GSC400 Series. GSC400 Programmer and PC Interface User Manual
GSC400 Series GSC400 Programmer and PC Interface User Manual GSC400 Programmer and PC Interface User Manual Full Version File: GSC400 PC Interface Rev1.2.doc, August 2009 2 of 33 Amendments Issue Section
Serial Graphic LCD Hookup
Page 1 of 13 Serial Graphic LCD Hookup Introduction Welcome to the hookup guide for the Serial Graphic LCD Backpack. In this tutorial, you will learn how to use the backpack to its full potential. We ll
TETRIX PRIZM Robotics Controller Quick-Start Guide and Specifications
TETRIX PRIZM Robotics Controller Quick-Start Guide and Specifications 43167 Content advising by Paul Uttley. SolidWorks Composer renderings by Tim Lankford and Brian Eckelberry. Desktop publishing by Todd
Wireless Open-Source Open Controlled Command and Control System WOCCS Design Project. User Manual
MSD - 2011 Rochester Institute of Technology Wireless Open-Source Open Controlled Command and Control System WOCCS Design Project User Manual Revision 1 P11204 Systems Level User Manual WOCCS User Manual
RS422/RS485 Shield. Application Note: Multiple RS485 busses. 1 Introduction
1 Introduction This application note will show you how to connect up to 3 independent RS485 busses to one Arduino. This can be useful if you want to create a gateway between these busses or if you want
DL-10. User Manual. RS-485 Remote Temperature and Humidity. English Ver. 1.0, Jul. 2017
DL-10 User Manual RS-485 Remote Temperature and Humidity English Ver. 1.0, Jul. 2017 WARRANTY All products manufactured by ICP DAS are warranted against defective materials for a period of one year from
GLOG V2. Quick Guide
GLOG V2 Portable RS232 Serial Data Logger Quick Guide (c) 2015 - Geomatics USA, LLC GLOG V2 is a battery-powered compact device that logs data from RS232 serial devices. It records the logged bytes (in
SC20MPC: 2 Mega Pixels Serial JPEG Camera User Manual. Introduction
2 Mega Pixels Serial JPEG Camera SC20MPC User Manual, Rev. F (August 2018) For latest user manual, please visit: Introduction The SC20MPC Camera is a highly integrated serial JPEG camera module which can
Arduino UNO R3 ESP8266 Web Server Serial Port WiFi Shield ESP13
Arduino UNO R3 ESP8266 Web Server Serial Port WiFi Shield ESP13 1. Pin Explanation G: GND 5V: 5V Power Output D:connecting to digital port(d2-d13)of arduino control board 1 Control Switch: to control the
Wifi Attachment Manual
Wifi Attachment Manual V1.5.3 Copyright 2010 Reef Angel All Rights Reserved The product and the information contained herein are subject to change without notice. This manual may not, in whole or in part,
USBTinyMkII User manual
USBTinyMkII User manual USBTinyMkII Rev 1.1b & Rev 2 Copyright Tom_L 2010 All rights reserved Revision 1.1b Revision 2 Contents 1) Overview 2) Switch Positions 3) Connector Pinouts 4) Using USBTiny MkII
TETRIX PRIZM Robotics Controller Quick-Start Guide and Specifications
TETRIX PRIZM Robotics Controller Quick-Start Guide and Specifications 43167 Content advising by Paul Uttley. SolidWorks Composer renderings by Tim Lankford and Brian Eckelberry. Desktop publishing by Todd
In this activity you will create a tool to allow you to play games such as Red Light/Green Light. To create the game, follow the steps below.
Example: Hello World In this activity you will create a tool to allow you to play games such as Red Light/Green Light. To create the game, follow the steps below. If you get stuck, go to the Troubleshooting
AVR Standalone ISP Programmer V2 Instructions
1 of 11 AVR Standalone ISP Programmer V2 Instructions The AVR Standalone ISP Programmer is designed to accept a hex file from any terminal program *** and store it in external eeprom for later use. Once
One Grove Base Shield board this allows you to connect various Grove units (below) to your Seeeduino board; Nine Grove Grove units, consisting of:
GROVE - Starter Kit V1.0b Introduction The Grove system is a modular, safe and easy to use group of items that allow you to minimise the effort required to get started with microcontroller-based experimentation
Manual 601: : USB/RS232. Specifications. Contents. Options
Page 1 ATE-601 601: : USB/RS232 I/O Controller - 8 Inputs, 4/8 Relays The ATE-500/600 series is a range of modular I/O controllers. It uses small standardized boards which allows you to configure the system
Ethernet Network Card Installation and Operation Manual
Ethernet Network Card Installation and Operation Manual Revision B 2017, Yaskawa - Solectria Solar Page 1 of 14 1. Overview 1.1 Introduction The Ethernet Network Card is used for monitoring and controlling
Introduction to Arduino
Introduction to Arduino Paco Abad May 20 th, 2011 WGM #21 Outline What is Arduino? Where to start Types Shields Alternatives Know your board Installing and using the IDE Digital output Serial communication
Arduino Uno Microcontroller Overview
Innovation Fellows Program Arduino Uno Microcontroller Overview, http://saliterman.umn.edu/ Department of Biomedical Engineering, University of Minnesota Arduino Uno Power & Interface Reset Button USB
MegaPi Born to Motion Control
MegaPi Born to Motion Control SKU: 10050 Weight: 130.00 Gram 1. Overview MegaPi is a main control board specially designed for makers and also an ideal option for being applied to education field and all
Model UD2A-EDID DVI Extender with EDID Management, Serial & GUI Control
Model UD2A-EDID DVI Extender with EDID Management, Serial & GUI Control UMA1148 Rev D Copyright 2008. Hall Research, Inc. All rights reserved. 1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698
Dual PT100 RTD to CAN-Bus Converter. v1.0 August 2018
Dual PT100 RTD to CAN-Bus Converter v1.0 August 2018 Product name Model number Manufacturer Dual PT100 RTD to CAN-Bus Converter CAN-PT100-DUO SK Pang Electronics Ltd 1 Contents Table of Contents 1. Introduction...
Installing the AdMore Configurator Software
Installing the AdMore Configurator Software The AdMore Configurator is used to configure the AdMore Light Bar Light and to change default settings. The Light Bar comes pre-configured with standard (Default)
USER GUIDE. ATmega168 Xplained Mini User Guide. Introduction
USER GUIDE ATmega168 Xplained Mini User Guide Introduction This user guide describes how to get started with the Atmel ATmega168 Xplained Mini board. The ATmega168 Xplained Mini evalutation kit is a hardware
Name: Serial MP3 Player A manual
OPEN-SMART Name: Serial MP3 Player A manual Version: v1.1 Date: 2018.01.13 OPEN-SMART 1 / 13 1 Description 2 / 13 The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio
Download blink_app.ino, BlinkApp.zip, morse_code_shell.ino and MorseCodeShell.zip.
Morse Code Learning Objectives: Learn how to use a USB accessory with the Android Tablet Create a functional dual component application Get experience with Android and Arduino programming Before You Start:
1-Multitasking with ladder programming on LDmicro4.2 for MEGA 2560 via USB 1-0 The machines to program: 1-1 Settings on LDmicro:
1-Multitasking with ladder programming on LDmicro4.2 for MEGA 2560 via USB 1-0 The machines to program: 1-1 Settings on LDmicro: 1-2-Program the ladder: a translation of the state diagram I have got some
URCOM. User s Manual
URCOM User s Manual V1.1 TechTools PO BOX 462101 Garland, TX 75046 (972) 272-9392 FAX: (972) 494-5814 www.tech-tools.com support@tech-tools.com Table of Contents INTRODUCTION 1 INSTALLATION 1 Verify UniROM
2EB/Atlantis/Discovery Hardware Installation Guide for Windows Vista and 7
2EB/Atlantis/Discovery Hardware Installation Guide for Windows Vista and 7 Do these steps to install the hardware ONLY after the software has been installed. If you plug in the unit to the computer prior
Web Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Dual Serial Shield User Manual
Dual Serial Shield User Manual PN: 2050 Berkshire Products, Inc. Phone: 770-271-0088 http://www.bkp-store.com/ Rev: 1.00 Copyright 2013 Table of Contents 1 Introduction... 2 1.1 XB compatibility... 2 2
WiFiBee MT7681 (Arduino WiFi Wireless Programming) SKU: TEL0107
WiFiBee MT7681 (Arduino WiFi Wireless Programming) SKU: TEL0107 Introduction The WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module. It is compatible with an XBee slot,
MKS GEN. MKS Gen is a feature rich all-in-one electronics solution for Reprap and other CNC devices.
MKS GEN Overview MKS Gen is a feature rich all-in-one electronics solution for Reprap and other CNC devices. It features an onboard ATmega2560. Its five motor outputs are powered by Pololu pin compatible
mmwave Sensor Raw Data Capture Using the DCA1000 Board and mmwave Studio
mmwave Sensor Raw Data Capture Using the DCA1000 Board and mmwave Studio Scope of the training This training will help you getting started on capture raw ADC data from TI s mmwave sensor devices using
arduino mega D4F69C4DABCA73DE7282FD2C4B5B8 Arduino Mega / 6
Arduino Mega 2560 1 / 6 2 / 6 3 / 6 Arduino Mega 2560 Use your Arduino Mega 2560 on the Arduino Web IDE All Arduino and Genuino boards, including this one, work out-of-the-box on the Arduino Web Editor,
Using the Lumens DC130 Document Camera
Using the Lumens DC130 Document Camera Connection Once installed, the basic connection setup should already be done for you. When set up correctly, you should be able to use programs on your computer AND
EEG 101L INTRODUCTION TO ENGINEERING EXPERIENCE
EEG 101L INTRODUCTION TO ENGINEERING EXPERIENCE LABORATORY 1: INTRODUCTION TO ARDUINO IDE AND PROGRAMMING DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING UNIVERSITY OF NEVADA, LAS VEGAS 1. FYS KIT COMPONENTS
Sten-SLATE ESP Kit. Description and Programming
Sten-SLATE ESP Kit Description and Programming Stensat Group LLC, Copyright 2016 Overview In this section, you will be introduced to the processor board electronics and the arduino software. At the end
Cube II/Cube Pro with Go2Nova 8408 Hand Controller Firmware Upgrade
Cube II/Cube Pro with Go2Nova 8408 Hand Controller Firmware Upgrade The firmware of a Cube II/Cube Pro mount and Go2Nova 8408 hand controller can be upgraded by a customer. Please check ioptron s website,
EVShield Interface Specifications
EVShield Advanced Development Guide v1.0 EVShield Interface Specifications Power Specs: EVShield can be powered from external power supply. Max Power Rating: 10.5 Volts DC Minimum 6.6 Volts DC needed to
Section 4 - Automation Assembly
Table of Contents 1. Process Control Unit (PCU) 1.1 Introduction 1.2 PCU Power Cable 1.3 Display and input controls 1.4 Analog Inputs 1.5 FET Outputs 1.6 Thermocouple Connectors 1.7 Table of Thermocouples
Necessary software and hardware:
Necessary software and hardware: Bases: First, remember that I m a French guy so my English is not perfect ;) If you see any mistakes, don t hesitate to tell me so I can correct them (my email is at the
KeyAT-5 Firmware Upgrade
L 3 Systems, Inc. PO Box 2954, Redmond, WA 98073 These are instructions for upgrading firmware for the KeyAT-5 RS-232 to USB Keyboard Port Adapter. Connections The KeyAT-5 RS-232 to USB Keyboard Port Adapter
Omega MP. Multi-Programming Shield for Atmel Microcontrollers. User Manual
Omega MP Multi-Programming Shield for Atmel Microcontrollers User Manual Ω - Omega MCU Systems Copyright 2012 Contents Introduction...2 Omega MP main features:...2 Getting Started...3 Assumptions...3 1.