Installation Instructions and Tips for GLAZ Diamond / Titan:

Transcription

1 Installation Instructions and Tips for GLAZ Diamond / Titan: For the backside of the iphone 7/7+ Jetblack GLAZ-Titan: For the backside of: iphone 7 / 7+ iphone 6 / 6s iphone 6+ / 6s+ iphone 5 / 5c / SE Apple Watch 38 and 42 mm aluminium ipad Air, ipad mini, ipad Pro 9,7 & 12,9 The following instructions describes how to attach GLAZ Diamond / Titan to the models above. For the clean and optimal installation a smooth table, sufficient space and light is recommended. Please note that the GLAZ Diamond can only be used on the back of the iphone 7/7 + JetBlack. In order to achieve the optimum exposure time, the application should be done in the evening. If you have any further questions about the product, please check our FAQs or contact us via the form! Step 1 Clean your device with the included alcohol pad (isopropyl alcohol). Step 2 Dry your device with the GLAZ cloth (microfiber cloth or similar) Step 3 Check again if your device is clean and free of dust and fingerprints. If your device is not clean, the GLAZ Diamond / Titan can not harden.

2 Step 4 Apply the pad which is soaked with GLAZ-Diamond / Titan evenly and slowly, also go over the edge of the device. Apply GLAZ Diamond / Titan also on the camera lens and the Apple logo. Now you see a light film (veil) on the surface. This step should not take longer than 1 min. Step 5 Watch out!!! Important GLAZ Diamond and GLAZ Titanium are different at the application: Let the GLAZ Diamond absorb for 5 min. Please do not wait longer than 5 min, otherwise it will be harder to remove the veil. Then go to step 6. GLAZ Titan: When using GLAZ-Titan, treat the back of your device after each application for 5 minutes with a commercially available hair dryer (three times) at a distance of at least 15 cm, so that the GLAZ Titan can enter. Then go to step 6. Step 6 Polish the backside with the microfiber cloth and light pressure, until you can not see the veil anymore. Do not attempt to polish with force, otherwise you can remove the coating. Please also polish the Kameralinse and the Apple logo until the veil is no longer visible. Step 7 Wait minutes and repeat Step 2 till 6 a second time.

3 Step 8 Wait minutes and repeat Step 2 till 6 a third time. If you treated your device overall 3 times with Diamond or Titan, go to Step 9. Step9 Restrict the use of your device for hours to avoid possible scratch formation. GLAZ Diamond / Titan needs to cure for hours. An earlier use often results in scratches. Step 10 Please wash your hands carefully after application. Step 11 Thats how the result should looks like after 3 applications Other interesting Answers: Can I use GLAZ Diamond on the back of devices other than the iphone 7/7 + JetBlack? No, the GLAZ Diamond has only been developed for the iphone 7 / 7+ JetBlack. For the following devices (iphone 6 / 6s / 6 + / 6s + / 5 / SE) you can use GLAZ-Titan. When must GLAZ Diamond / Titan be renewed? After one year, the full protection of GLAZ Diamond / Titanium is no longer guaranteed and must be reapplied. (Hint from the GLAZ team: Make a note in your calendar) Can I remove GLAZ Diamond / GLAZ Titan without residue from the back of my device?

4 No, the product wrotects itself as a second skin on the back of your device and can not be removed. What happens when applying GLAZ Diamond / Titan the Display comes into contact with it? Nothing happens to your display. You can simply polish it with the enclosed microfiber cloth. Can I use any cleaner before applying GLAZ Diamond / Titan? Before applying GLAZ Diamond / Titanium, please use the cleaning cloth with Isopropyl Alcohol, which is specially developed for our product. Do I have to consider something after applying GLAZ Diamond / Titan? Watch out!!! Important GLAZ Diamond and GLAZ Titanium are different at the application: Let the GLAZ Diamond absorb for 5 min. Please do not wait longer than 5 min, otherwise it will be harder to remove the veil. Then go to step 6. GLAZ Titan: When using GLAZ-Titan, treat the back of your device after each application for 5 minutes with a commercially available hair dryer (three times) at a distance of at least 15 cm, so that the GLAZ Titan can enter. Then go to step 6. Check that there are no residues left. After hours of rest, you have reached the optimum result, which means that the product should cure in a maximum of 36 hours without use. When is it ensured that GLAZ Diamond / Titan is hardened? After hours, that means that the product should cure in a maximum of 36 hours without use. What should I pay attention to when applying GLAZ-Diamond / Titanium? That the back of your device is fully used with the pad and any liquid (veil) is evenly distributed. How long do I have to use the microfiber cloth to polish the display after applying GLAZ Diamond / Titan? Until the backside shines and no residues are left over anymore. Does the application with GLAZ-Diamond protects my back from all damage?

5 No, GLAZ Diamond makes your backside harder, but crashing or damage will result in scratches and damage. GLAZ accepts no liability. We will indemnify you for damages of any kind. Does the application with GLAZ Titanium protects my back from all damage? Yes, GLAZ Titan makes the backside as hard as Saphir (9H). However, it does not make your product scratch resistant. In case of fall or a considerable expenditure of force, scratching or breakage can occur in the material. We will indemnify you for damages of any kind. Do you still have further questions? Then check our FAQs or contact us via the form!