Rimless pan design. Vitreous china. Vitreous chin. Bidet Feature

Transcription

1

2

3

4 Flush el Fixings * 48* Finished Remote Finished * Nominal dimensions 13~62 13~62 based on in-wall tank being installed at designated height This height can be adjusted to suit user preference. * Nominal dimensions based on in-wall tank being installed at designated height. This height can be adjusted to suit user preference. 1027* 1027* Veil wall hung toilet with integrated bidet. In wall cistern - Hydro tower 500 (4.5/3L). Flush el Remote Touchless flush button panel. Wireless one touch remote. Flush el Remote Waste pipes (S & P trap) & straight inlet connection pipe. fixing bolts. Self temperature cleaning Touchless flush button panel in Honed White. Air blower an Ergonomic french curve seat with antibacterial material. Self cleaning Sensor activated auto open and close function for seat lid. Technical Insulated Details in-wall cistern - fully framed. Automatic, touchless or manual Dual flush (4.5/3L). Technical Built Details in LED night-light. Deodouriser function. Back up shut-off valve located on cistern Rimless pan design. Vitreous china Bidet Instantly heated water with stainless steel wand. Spray wand features adjustable water pressure and 675 temperature, and oscillate and pulsate functions. 1027* Air blower and heated seat with adjustable temperature. 675 Self cleaning and UV sanitising nozzle. 1027* 350 Fixings 48* * Finished Weight: - 36kg Approx In wall cistern In-wall Tank - 16kg 48* Approx S-Trap pipe Fixings * 90mm Water supply to bidet Weight: - 36kg Approx In-wall Tank - 16kg Approx Weight: - 36kg Approx In-wall Tank - 16kg Approx Back Built in up LED shu Rimless Deodouriser pan Vitreous Back up chin shu Rimless pan Bidet Feature Vitreous chin Instantly hea Bidet Spray Feature wand Instantly temperature hea Air Spray blower wand an S-Trap pipe 13~ 90mm Water supply pressure range: Min 70kPa - Max 500kpa. Installation Power supply Notes: requirements: Dedicated 10A min, 220~240V Power Power supply AC, supply 50/60Hz sup Water Rated supply power:1000w. pressure Max range: instant Min 70kPa power: W. Max 500kpa. entry entry above above this support this support In-wall Power cistern supply requirements: has an adjustable Dedicated height and 10A is min, designed 220~240V to be AC, fixed 50/60Hz to the floo sup Fixing Fixing holes holes IMPORTANT: Rated power:1000w. This toilet Max must instant be installed power: 1600W. in accordance with AS/NZS In-wall cistern has an adjustable Signal height and is designed to be fixed to the floo wire IMPORTANT: This toilet must be installed in accordance with AS/NZS S-Trap pipe 13~ 90mm Sizes 180 are 180 approximate. All measurements shown are in millimetres. * Nominal dimensions based on in-wall tank being installed at designated height. This height can be adjusted to suit user preference. Water supply pressure range: Min 70kPa - Max 500kpa. Power supply requirements: Dedicated 10A min, 220~240V AC, 50/60Hz supply with ELCB or GFCI. Rated power:1000w. Max instant power: 1600W. In-wall cistern has an adjustable height and is designed to be fixed to the floor and studs using the supplied bolts. IMPORTANT: This toilet must be installed in accordance with AS/NZS Plumbing and Drainage. Jan A04-A

5 water efficient Licence No litres per average flush When tested in accordance with Standard AS/NZS 6400 Grande TM Back to Suite TOILETS / SUITES STS - G Grande back to wall toilet suite 76078A-0 Grande toilet pan. Grande toilet cistern 4.5/3L. TM Grande Quiet Close, VQR (vertical, quick release toilet seat). Vario pan connector. Offset pan collar (20mm). Fill valve for top left rear entry. Fill valve for pan side entry (supplied with pan). Top left rear entry water supply hose. 2 x caps for pan side entry holes. 1 x hose ring for pan side entry hole. fixing kit. Dual flush (4.5/3L). Water entry: Top left rear entry or right/left pan side entry. P-trap set out height: 185mm. S-trap set out: Standard: 90mm - 160mm (with vario pan connector & 20mm offset pan collar - supplied). Optional: 160mm - 230mm (with long adjustable vario pan connector, 98451A-0 - not supplied). Rimless pan design. Vitreous china. The more stars the more litres per full flush litres per half flush Weight: - 35kg Appr Cistern - 17kg Appr Vario pan connector S-trap installation Minimum set out MIN side inlet hole CL of Fixings Maximum set out offset MAX 420 *Note: Set outs between mm are achievable with the Long Adjustable Vario 98451A-0 (not supplied). Water supply pressure range: 20 psi (137 kpa) - 72 psi (500 kpa). Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector & or pan offset collar (supplied). Top left rear entry water supply hose is supplied. side entry water supply hose must be purchased separately if required. Supplied hose ring is only required with a pan side entry setup. April A04-A

6 water efficient Licence No litres per average flush When tested in accordance with Standard AS/NZS 6400 Escale Back to Suite - Top Left Back Entry TOILETS / SUITES STS - E Escale back to wall toilet suite - standard top left back entry 3737A-0 Escale toilet pan Escale toilet cistern 4.5/3L Escale quiet close toilet seat with metal hinge Vario pan connector Fill valve fixing bolts and anchors The more stars the more litres per full flush litres per half flush Dual flush (4.5/3L) Top left back entry P-trap set out height: 185mm S-trap set out: 90mm - 160mm (with vario pan connector) 160mm - 220mm (with long adjustable vario pan connector 98451A-0 (not supplied)). Concealed trapway Open rim Vitreous china Related s Escale basins Escale BubbleMassage baths Escale toilets Escale baths Vario pan connector S-trap installation Minimum set out Weight: - 39kg Appr Cistern - 15kg Appr 90 MIN Maximum set out 160 MAX *Note: Set outs between mm are achievable with the Long Adjustable Vario 98451A-0 (not supplied). Water supply pressure range: 20 psi (137 kpa) - 80 psi (551 kpa). Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied) and pan collar (not supplied). The installation of a remotely located inlet shut-off valve (not supplied) is required. Oct A04-G

7 Escale Hung TOILETS / WALL HUNG WH - E Escale wall hung toilet with bevel flush button panel Escale wall hung toilet with oval flush button panel 45287A A-0 Escale P-trap toilet pan Escale quiet close toilet seat with metal hinges In wall cistern 88mm 4.5/3L Flush button panel Waste & inlet straight connection pipes Waste pipe gasket fixing bolts Chrome fixing bolt caps Left side: Bevel panel Right side: Oval panel Choice of bevel or oval flush button panel In wall cistern - fully framed Dual flush (4.5/3L) Back up shut-off valve located on cistern and accessible through the flush button panel P-trap set out: 205mm Open rim Vitreous china Related s Escale basins Escale BubbleMassage baths Escale toilets Escale baths Weight: kg Appr Cistern - 10kg Appr max 289 In wall cistern of Inlet of O O102 fixings Inlet In wall cistern & pan (recommended height shown) fixings 35 Finished floor Water supply pressure range: 20 psi (137 kpa) - 72 psi (500 kpa). The in wall cistern has an adjustable height and is designed to be fixed to the floor and studs using the appropriate bolts (not supplied). The waste outlet and water inlet are connected via straight pipes (supplied) cut to length. The flush button panel (supplied) can be cut so that it sits flush with the wall. Feb A04-G

8 water efficient Licence No litres per average flush When tested in accordance with Standard AS/NZS 6400 Kohler Dual Back to Suite - Rear or Side Entry TOILETS / SUITES STS - P Kohler Dual back to wall toilet suite - rear or side entry side entry with cap side entry with hose ring 77304A-0 pan. The more stars the more cistern 4.5/3L. Quiet Close, Vertical Quick Release TM (VQR) toilet seat. Vario pan connector. Offset pan collar (20mm). Fill valve for rear entry. Fill valve for pan side entry (supplied with pan). litres per full flush litres per half flush Rear entry water supply hose (pan side entry water supply hose not supplied). 2 x caps for pan side entry holes. 1 x hose ring for pan side entry hole (for use with pan side entry setup only). fixing bolts and anchors. Dual flush (4.5/3L) Water entry: Top left rear entry or right/left pan side entry. P-trap set out height: 185mm. S-trap set out: Standard: 90mm - 140mm (with vario pan connector & 20mm offset pan collar - supplied). Optional: 160mm - 230mm (with long adjustable vario pan connector, 98451A-0 - not supplied). Box rim. Vitreous china. Vario pan connector S-trap installation Weight: - 32kg Appr Cistern - 15kg Appr Minimum set out 20mm Offset 90 MAX Side Entry 75 Rear Entry Maximum set out CL of 295 Fixings mm Offset MAX *Note: Set outs between mm are achievable with the Long Adjustable Vario 98451A-0 (not supplied). Water supply pressure range: 20 psi (137 kpa) to 80 psi (551 kpa). Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector along with the 20mm offset pan collar (supplied). Rear entry water supply hose is supplied. side entry water supply hose is not supplied and must be purchased separately. The installation of a remotely located inlet shut-off valve (not supplied) is required. Sep A04-C

9 water efficient Licence No litres per average flush When tested in accordance with Standard AS/NZS 6400 Reach Compact Back to Suite - Rear or Side Entry TOILETS / SUITES STS - R Reach compact back to wall toilet suite - Rear or side entry 77303A-0 Related s Reach basins side entry with cap Reach toilets Reach compact toilet pan. Reach compact toilet cistern 4.5/3L. Reach compact quiet close toilet seat with metal hinge. Vario pan connector. Fill valve for rear entry. Fill valve for pan side entry (supplied with pan). Rear entry water supply hose (pan side entry water supply hose not supplied). 2 x pan side entry rubber caps. fixing bolts, anchors and chrome covers. Dual flush (4.5/3L). Water entry: Top left rear entry or right/left pan side entry. P-trap set out height: 185mm. S-trap set out: Standard: 90mm - 160mm Optional: 160mm - 230mm (with long adjustable vario pan connector, 98451A-0 - not supplied). Concealed trapway. Box rim. Vitreous china. The more stars the more litres per full flush litres per half flush Vario pan connector S-trap installation Weight: - 27kg Appr Cistern - 14kg Appr Minimum set out MIN Side Entry 60 Rear Entry Maximum set out CL of Fixings MAX *Note: Set outs between mm are achievable with the Long Adjustable Vario 98451A-0 (not supplied). Water supply pressure range: 20 psi (137 kpa) - 73 psi (500 kpa). Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied) and pan collar (not supplied). Rear entry water supply hose is supplied. side entry water supply hose is not supplied and must be purchased separately. The installation of a remotely located inlet shut-off valve (not supplied) is required. Nov A04-A

10 3.3 ache Faced TOILETS / WALL FACED WF - P ache WF P-trap toilet with bevel flush button panel ache WF P-trap toilet with oval flush button panel ache WF S-trap toilet with bevel flush button panel ache WF S-trap toilet with oval flush button panel 45284A A A-H A-H-0 ache toilet pan ache quiet close toilet seat In wall cistern 88mm 4.5/3L Vario pan connector (S-trap only) 20mm offset collar (S-trap only) Fixing brackets and bolts Flush button panel fixing bolts and anchors Left side: Bevel panel Right side: Oval panel Choice of bevel or oval flush button panel In wall cistern - with support brackets Dual flush (4.5/3L) Back up shut-off valve located on cistern and accessible through the flush button panel P-trap set out: 185mm S-trap set out: 90mm-110mm ( with vario pan connector & 20mm offset pan collar) Box rim Vitreous china Related s ache basins ache toilets ache tapware Weight: - 15kg Appr Cistern - 10kg Appr In wall cistern max Vario pan connector S-trap installation Minimum set out 20mm Offset 90 MIN 550 In wall cistern installation O55 O102 Maximum set out 110 MAX 20mm Offset Water supply pressure range: 20 psi (137 kpa) - 80 psi (551 kpa). Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied) along with the 20mm offset pan collar (supplied). The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied). In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the brackets using bolts (supplied). The flush button panel (supplied) can be cut so that it sits flush with the wall. Nov A04-G

11 KOHLER OVE WALL FACE 3.3 litres per average flush Ove Faced TOILETS / WALL FACED WF - O Ove wall faced toilet with bevel flush button panel Ove wall faced toilet with oval flush button panel 45282A A-0 Ove toilet pan Ove quiet close toilet seat with metal hinge In wall cistern 88mm 4.5/3L Fixing brackets and bolts Flush button panel fixing bolts and anchors Left side: Bevel panel Choice of bevel or oval flush button panel In wall cistern - with support brackets Dual flush (4.5/3L) Back up shut-off valve located on cistern and accessible through the flush button panel. P-trap set out: 185mm Open rim Vitreous china Right side: Oval panel Related s Ove basins Ove furniture Ove toilets Ove baths 88 In wall cistern 65 max Weight: - 25kg Appr Cistern - 5kg Appr In wall cistern installation O55 O Water supply pressure range: 20 psi (137 kpa) - 80 psi (551 kpa). The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied). In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the brackets using bolts (supplied). The flush button panel (supplied) can be cut so that it sits flush with the wall. Sep A04-E

12 Ove Hung TOILETS / WALL HUNG WH - O Ove wall hung toilet with bevel flush button panel Ove wall hung toilet with oval flush button panel 45281A A-0 Ove P-trap toilet pan Ove quiet close toilet seat with metal hinges In wall cistern 88mm 4.5/3L Flush button panel Waste & inlet straight connection pipes Waste pipe gasket fixing bolts Fixing bolt cover caps Left side: Bevel panel Right side: Oval panel Choice of bevel or oval flush button panel In wall cistern - fully framed Dual flush (4.5/3L) Back up shut-off valve located on cistern and accessible through the flush button panel P-trap set out: 225mm Open rim Vitreous china Related s Ove basins Ove toilets Ove drop-in bath max In wall cistern Weight: kg Appr Cistern - 10kg Appr of Inlet of O O102 Finished floor fixings Inlet In wall cistern & pan (recommended height shown) fixings Water supply pressure range: 20 psi (137 kpa) - 72psi (500 kpa). The in wall cistern has an adjustable height and is designed to be fixed to the floor and studs using the appropriate bolts (not supplied). The waste outlet and water inlet are connected via straight pipes (supplied) cut to length. The flush button panel (supplied) can be cut so that it sits flush with the wall. Feb A04-G