2.1 PVC PIPE & FITTINGS DRAINAGE

Size: px
Start display at page:

Download "2.1 PVC PIPE & FITTINGS DRAINAGE"

Transcription

1 2.1 pvc DRAINAGE pipe & fittings

2 NOVADRAIN & SUPERTUFF EXTRA Drain Waste and Vent Pipes for Sewer and Drain (NON-PRESSURE APPLICATIONS ONLY) Compliance: Manufactured in accordance with AS / NZS 1260:1999 PVC Pipes and Fittings for Drain, Waste and Vent Applications (Note: DWV pipes and fittings are coloured grey as specified in AS / NZS 1260:1999). SN stiffness class represents values in N/m/m e.g. SN 6 pipe has a stiffness of 6000 N/m/m. Applications: May be used for: Above ground waste and vent applications Domestic house drains Urban gravity sewer mains Industrial gravity discharge lines Thrusted gravity sewer main applications Product Data (a) NOVADRAIN Plain Wall upvc Pipe Product Code: 100 Series Description: Jointing: (b) SUPERTUFF EXTRA Impact Modified PVC Plain Wall Pipe Product Code: 155OST Series Description: Jointing: NOVADRAIN is a solid wall pipe manufactured from upvc material. Solvent cement joints available in size DN100 SN6 and DN150 SN4. Rubber ring joints are available in all sizes: DN100 DN475 inclusive. product dimensions: Table 6(a): NOVADRAIN Plain Wall Pipe Nominal Size DN Mean Outside Diameter* Length Effective Length SUPERTUFF EXTRA is a solid wall pipe utilising impact modified PVC material, which gives superior impact strength qualities over conventional upvc material. Rubber ring joints are available in: DN150. Stiffness Classes SN 4 SN 6 SN 8 SN 10 SN *Refer to AS / NZS 1260:1999 for exact dimensions and tolerances. Product Dimensions: Table 6(b): SUPERTUFF EXTRA Impact Modified PVC Plain Wall Pipe Dimensions Nominal Mean Outside Effective Class SN 16 Size DN Diameter* (mm) Length (m) *Refer to AS / NZS 1260:1999 for exact dimensions and tolerances. NOVADRAIN

3 Length: 6 metre effective length. The overall length of each pipe is 6 metres plus the witness mark length. Rubber Ring Joint: Effective Length Overall Length Effective Length Overall Length Solvent Cement Joint: effective Length overall Length Effective Length Overall Length Fittings: INSTALLATION PRACTICE: DWV Fittings (upvc) Solvent Weld Joint (Coded 100 Series) Injection Moulded fittings DN32 DN150* Rubber Ring Joint (Coded 1500 Series) Injection Moulded fittings DN100 DN150* Large Diameter Fabricated Sewer Fittings DN175 DN375 * Suitable for all stiffness classes, SN4 SN16. Drain, Waste & Vent pipe systems should be installed in accordance with the following installation Standards / Manuals: AS 2032:1977 Installation of upvc Pipe System AS / NZS 2566 Design and Installation of Flexible Buried Pipelines Written recommendations from Mico Pipelines or MasterTrade Limitations: PVC Drain, Waste & Vent should not be used: With aromatic and chlorinated hydrocarbons, ketones, esters and ethers For pumped pressure applications At continuous service temperatures above 60ºC or for intermittent discharges of liquid above 75ºC Without adequate support to the pipe both in above ground and below ground applications Without adequate thrust support In below ground applications where depth of cover is less than: - 300mm where pipeline is not subject to vehicular loading - 450mm where pipeline is subject to vehicular loading not in roadways - 600mm where pipeline is subject to vehicular loading in sealed roadways - 750mm where pipeline is subject to vehicular loading in unsealed roadways - 750mm where pipeline is subject to construction equipment loadings When exposed to direct sunlight above ground for long term applications, without protection. This protection may include pale coloured U.V. resistant systems or physical shading NOVADRAIN

4 Ducting Pipe (Stormwater, SUPERSTORM, STORMFLO, NEXUS HI-WAY, Road Drains, Road Culverts) Compliance: (a) Superstorm upvc Duct to NZS (b) Stormflo upvc Duct to AS (c) Nexus Hi-Way Heavy Duty Subsoil Drain to TNZF/2:2000. applications & product codes: (a) PVC Superstorm Duct (Product code 700 Series) Local Authority stormwater laterals and mains, culverts and flumes, fabrication of fittings and specials, decorative building columns, cool store under-floor ducts, rainwater down pipes. Product Data Table 9: Duct Pipe Dimensions Nominal Size (DN) (mm) SUPERSTORM 700 Series PVC Stormwater Duct Mean O.D (mm) Mean W.T (mm) STORMFLO 1700 Series PVC Stormwater Duct Mean O.D. (mm) Mean W.T (mm) Jointing: Fittings: Fittings to be used (b) PVC Stormflo Duct (Product code Series) Local Authority stormwater laterals and mains, culverts and flumes, fabrication of fittings and specials, decorative building columns, cool store under-floor ducts, rainwater down pipes. (c) NEXUS HI-WAY heavy duty subsoil drain (Product code NEXUS HD Series) HDPE subsoil drains under roads, conforming to TNZF/2:2000, land fill leachate drains, heavy duty subsoil drains. SUPERSTORM 700 Series PVC Stormwater Duct 700 Series PVC Moulded stormwater fittings, solvent weld Fabricated stormwater fittings, solvent weld STORMFLO 1700 Series Stormwater Duct 700 Series PVC Moulded stormwater fittings, solvent weld Fabricated stormwater fittings, solvent weld NEXUS HI-WAY Nexus HD Series HDPE Road Drain Mean O.D (mm) SUPERSTORM and STORMFLO PVC pipes are supplied socketed one end, suitable for solvent weld (DN90 DN225) or rubber ring (DN150 DN475) joints. nexus HI-WAY HDPE road drain pipes are supplied in lengths or in coils with a factory fitted coupling. NEXUS HI-WAY Nexus HD Series HDPE Road Drain NOVAFLO/ NEXUS fitting range ducting pipe

5 PVC Drain Waste and Vent Pipe NON-PRESSURE APPLICATIONS ONLY AS/NZS 1260 SOLVENT CEMENT JOINT NOVADRAIN upvc DWV PIPE SOE & PE x LENGTH m SOE x SOE x SOE x SOE x PE x SOE x 6 SOLVENT CEMENT & RUBBER RING JOINT NOVADRAIN 4000 upvc DWV PIPE SOE & Z JOINT SN4 x LENGTH m 100SN SOE x 6 Z100SN x 4 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 SOLVENT CEMENT & RUBBER RING JOINT RUBBER RING JOINT NOVADRAIN 6000 upvc DWV PIPE SOE & RRJ SN6 x LENGTH m 100SN SOE x 6 100SN RRJ x 6 NOVADRAIN 8000 upvc DWV PIPE Z JOINT SN8 x LENGTH m Z100SN x 4 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 NOVADRAIN upvc DWV PIPE RRJ SN10 x LENGTH m 100SN RRJ x 6 RUBBER RING JOINT RUBBER RING JOINT NOVADRAIN upvc DWV PIPE RRJ & Z JOINT SN16 x LENGTH m 100SN RRJ x 6 Z100SN x 3 Z100SN x 4 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6 Z100SN x 6

6 PVC Drain Waste and Vent Pipe NON-PRESSURE APPLICATIONS ONLY AS/NZS 1260 NOVACOR 6000 upvc PIPE SOE & RRJ SN6 x LENGTH m 200SN SOE x 6 200SN RRJ x 6 SOLVENT CEMENT & RUBBER RING JOINT SUPERTUFF EXTRA IMPACT MODIFIED PVC PIPE Z JOINT SN16 x LENGTH m Z1550STSN x 6 RUBBER RING JOINT upvc RESTRAIN NON-PRESSURE APPLICATIONS ONLY AS/NZS 1260 (For Trenchless Installation) THREADED JOINT RRJ RESTRAIN 1600 upvc THREADED JOINT DWV PIPE RRJ SN16 x LENGTH m RESTRAIN x 6 RESTRAIN x 3 RESTRAIN x 6 RESTRAIN x 3 RESTRAIN x 6 RESTRAIN x 3 *Made to order *NEW PRODUCT For technical assistance and pricing assistance contact your local branch.

7 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE Plain Bend x x x x x x x x x x x x x x x x x x x x x x x x x 88 ADJUSTABLE BEND A x A x 0-45 PLAIN BEND M & F x x x x x x x x x x x x x 40 x 42 *Spigot is 50mm REDUCING BEND M & F INSPECTION BEND W x W x W x W x W x W x W x W x W x W x x 88 rear access bend

8 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE ACCESS BEND PLAIN JUNCTION reducing JUNCTION INSPECTION JUNCTION x x x x x x x x x x x x * x ** x x x 88 *Threaded on one main way socket and branch socket **Threaded on one main way socket x 50 x x 50 x x 50 x x 65 x x 80 x x 100 x x 100 x W x W x W x W x W x W* x 50 x W* x 65 x 45 *Reducing Junction rear access JUNCTION x x LH x RH x 45 side access JUNCTION x 88 Double junction STRAIGHT COUPLING EXPANSION COUPLING

9 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE FEMALE IRON TO PVC (SOCKET) MALE IRON TO PVC (SOCKET) COpPER TO PVC ADAPTOR x x x 50 STRAP ON BOSS bolted trap screw x 50 PIPE REDUCER LEVEL INVERT TAPER SOCKET REDUCER x x x x x x x x x x x x x x x x x x x x x x x AC.100* x AC.150* x 150 * Ceramic to PVC Adaptor

10 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE FLOOR FLANGE flexible pan collar unsuitable for use with p pans * ** A* R*** *Offset ** Concentric *** Rubber Seal Ring only safe waste tray * ** *F&F **Threaded on one main way socket inspection pipe M&F weather apron access cap and base access cap PUSH-ON CAPS 136C C vent cowl x squat floor waste gully** P x P x P* x x x 65 *Plain floor waste gully (fixed) **Use only in conjunction with Iplex Boss Junctions

11 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE *Use only in conjunction with Iplex Boss Junctions adjustable gully trap* x x 40 cap and lining White PVC socket floor grate SCREW DOWN VINYL FLOOR spigot base floor grate WH* CP** WH* CP** *White PVC **Chrome plated PVC spigot base floor grate * CP** *White PVC **Chrome plated Brass Grate spigot base floor grate FINISHING COLLAR 172G Grate Only Use in conjunction with Finishing Collar pop-out grate 172P Use in conjunction with Finishing Collar pop-up inspection cover x(2x50)x(2x40)x x(3x50)x(1x40)x x80x(2x50)x(2x40)x88 *Use only in conjunction with Iplex Squat Floor Gully and Adjustable Gully Trap boss junction M & F* x(3x50)x(1x40)x88 *Use only in conjunction with Iplex Squat Floor Gully and Adjustable Gully Trap

12 NOVADRAIN upvc Drain Waste and Vent Fittings SCJ NON-PRESSURE boss junction F & F* D x(1x50)x(3x40)x45 *Use only in conjunction with Iplex Squat Floor Gully and Adjustable Gully Trap DOUBLE BOSS JUNCTION M & F* Side slope squash top (inlet only) level inlet squash top (inlet only) VERMIN STOPPER Compatible with NZS or BS Copper Tube SMART PRODUCTS D101SPAN copper to pvc seal ring D101SSEAL SMARTPAN D101SWASTE D101SWASTE.B SMARTSEAL D101STRAP x 50 SMARTWASTE SMARTRAP D101STILE.2* *Stainless steel SMARTILE

13 UNI-TRAP Waste Traps P x 32 plain p trap S x 45 plain s trap DW x 32 With dishwasher connection combination s & p (INCLUDES ADAPTA KIT) ADAPTA KIT 40 x 32 For use with 160 & 161 Uni-Traps PIPE CLIPS DWV pipe clip DWV holderbat (Aluminium) 140H H H DWV standard Key clip DWV Side hanger key clip DWV STAND OFF KEY CLIP C C COPPER PIPE clipit complete with nail 841P P POLYBUTYLENE clipit complete with nail

14 NOVADRAIN upvc Drain Waste and Vent Fittings RRJ NON-PRESSURE plain bend f & F PLAIN BEND M & F x x x x x A* x 0-45 *Adjustable x x x x x x A* x 0-45 *Adjustable x 88 ramp bend x x 88 access bend plain junction x x x * x * x 88 *M&F x 100 x * x 100 x * x 100 x 88 *M&F REDUCING JUNCTION LH x RH x 45 access junction 1511S S SLIP COUPLING COMBINATION LOOSE/ SLIP COUPLING LOOSE COUPLING

15 NOVADRAIN upvc Drain Waste and Vent Fittings RRJ NON-PRESSURE 1511R REPAIR COUPLING x 88 septic Tank junction FRESH AIR INLET x x 100 level invert taper x 150 REVERSE level invert taper pvc to ceramic adapter x 114 PVC PRESSURE TO HOUSE DRAIN ADAPTER DN CERAMIC SOCKET TO PVC ADAPTER inspection Pipe M&F GULLEY TRAP GULLEY DISH L.100* *Lid Only

16 NOVADRAIN upvc Drain Waste and Vent Fittings RRJ NON-PRESSURE EXTENDED GULLEY DISH EXT 100 Grate Included GULLEY DISH RISER R R R MANHOLE CONNECTOR REFLUX VALVE

17 upvc STORMWATER DUCT NON PRESSURE APPLICATIONS ONLY - AS/NZS 1254 SUPERSTORM 4000 upvc STORMWATER DUCT SOE & Z JOINT SN4 SOLVENT CEMENT JOINT x LENGTH m 700SN SOE x 3 700SN SOE x 6 700SN SOE x 6 700SN SOE x 6 700SN SOE x 6 700SN SOE x 6 RUBBER RING JOINT Z700SN x 6 Z700SN x 6 Z700SN x 6 Z700SN x 6 Z700SN x 6 Z700SN x 6

18 STORMFIT upvc STORMWATER FITTINGS NON PRESSURE APPLICATIONS ONLY Plain bend F&F x x x x x x x x x x x M&F x 45 Plain bend M&F x x 88 ACCESS bend PLAIN JUNCTION ** x * x *** x ** x ** x *** x 90 *Threaded on branch socket **Threaded on one main way socket ***Threaded on one main way socket and branch socket x 100 x 45 REDUCING JUNCTION LH x RH x 45 INSPECTION JUNCTION straight coupling 711R REPAIR coupling x 100 adaptor

19 STORMFIT upvc STORMWATER FITTINGS NON PRESSURE APPLICATIONS ONLY * *Threaded on one main way socket Inspection Pipe M & f screw cap and base (gasket sold separately) C.90 * C.100* G.90** *Cap only **Gasket push on cap kerb outlet STORMWATER GRATE x 100

Pipes and fittings. Drain,Waste & Vent (DWV)

Pipes and fittings. Drain,Waste & Vent (DWV) K e y P l a s t i c s I n n o v a t i v e d e s i g n & e x c e p t i o n a l s e r v i c e Pipes and fittings Drain,Waste & Vent (DWV) DWV Pipes and Fittings Contents 3 Pipes 4 Plain, I.O & Access Bends

More information

BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS

BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)

More information

ARTPLASTICS PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS. BOUNTYBRASSWARE Designer Bathroom Fittings. Innovative Plumbing Fittings

ARTPLASTICS PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS. BOUNTYBRASSWARE Designer Bathroom Fittings. Innovative Plumbing Fittings PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS Innovative Plumbing Fittings BOUNTYBRASSWARE Designer Bathroom Fittings ABOUT US Art Plastics commenced its operations in Bayswater, Perth in February 19.

More information

Call us on

Call us on RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983

More information

EUROMARK RANGE 14.01

EUROMARK RANGE 14.01 EUROMARK RANGE 14.01 COMPANY PROFILE CONTENTS Eurocelt Plastics (Pty)Ltd is a KwaZulu Natal based company producing piping and drainage fittings for both above and below ground applications. Although recently

More information

The Trade Soil & Waste Product Guide

The Trade Soil & Waste Product Guide The Trade Soil & Waste Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Trade Soil & Waste Product Guide. This

More information

PVC DWV Drain Waste Vent Fittings

PVC DWV Drain Waste Vent Fittings DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed

More information

PVC PRESSURE SYSTEMS. Fittings / Pipes

PVC PRESSURE SYSTEMS. Fittings / Pipes D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45

More information

PVC DWV Drain Waste Vent Fittings

PVC DWV Drain Waste Vent Fittings PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS

More information

Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"

Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed

More information

SCHEDULE 40 FLUSH JOINT FITTINGS

SCHEDULE 40 FLUSH JOINT FITTINGS 130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

More information

SCHEDULE 40 FLUSH JOINT FITTINGS

SCHEDULE 40 FLUSH JOINT FITTINGS 130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

More information

CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES

CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with

More information

Water Supply and Sewerage Approved Products Manual - February 2006

Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED

More information

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2-16; P=87 PSI Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

More information

Third Party Tested. Sam Roberts & Associates, Inc.

Third Party Tested. Sam Roberts & Associates, Inc. Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect

More information

PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS

PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS 29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall

More information

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

More information

PVC SOLVENT WELD DRAIN WASTE & VENT

PVC SOLVENT WELD DRAIN WASTE & VENT PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING

More information

Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series

Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690

More information

Plumbing Brass Specification Guide

Plumbing Brass Specification Guide Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one

More information

Duo-Pro Double Contained Piping Systems

Duo-Pro Double Contained Piping Systems PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0

More information

Underground & Soil Systems. Issue 1.

Underground & Soil Systems. Issue 1. Underground & Soil Systems Issue 1 www.newplas.co.uk/uds 2 Contents Page Underground Drainage 3-8 User friendly easy fit system Lightweight, easy to handle Impact resistant and extremely durable in use

More information

Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:

Sam Roberts & Associates, Inc.  South Texas 3300 Capitol Houston, Texas Fax: Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.

More information

AIR TERMINALS: COPPER

AIR TERMINALS: COPPER AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM

More information

Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3" 12" Fabricated in Sizes 10" 36"

Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes " " Fabricated in Sizes 0" " Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry.

More information

Rimless pan design. Vitreous china. Vitreous chin. Bidet Feature

Rimless pan design. Vitreous china. Vitreous chin. Bidet Feature Flush el 438 675 350 Fixings 260 398* 48* Finished 435 435 50 50 Remote 215 215 Finished 478 478 * Nominal dimensions 13~62 13~62 based on in-wall tank being installed at designated height. 438 438 This

More information

PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM

PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM 79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX

More information

Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36

Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes Fabricated in Sizes 0 Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry. They

More information

Wavin Hep 2 O Flexible PB Push-Fit plumbing system

Wavin Hep 2 O Flexible PB Push-Fit plumbing system Water distribution Heating and cooling PRODUCT LIST Wavin Hep 2 O Flexible PB Push-Fit plumbing system Contents 1 Hep2O Pipe Page 3 2 Hep2O Fittings Page 4 3 Hep2O Accessories Page 14 4 Making connections

More information

Specialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage

Specialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and

More information

PE PIPE & FITTINGS LDPE PIPE

PE PIPE & FITTINGS LDPE PIPE LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory

More information

AUGUST 2008 TPL 44. Catalogue & Price Guide

AUGUST 2008 TPL 44. Catalogue & Price Guide AUGUST 2008 TPL 44 Catalogue & Price Guide CONTENTS To assist with product selection see flow capacity information on page 55 Hunter Half Round Rainwater 4-5 Hunter Squareflo Rainwater 6 Hunter 125 Rainwater

More information

May Wavin Hep2O Push-fit plumbing system. Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM. Solutions for Essentials

May Wavin Hep2O Push-fit plumbing system. Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM. Solutions for Essentials May 2013 Wavin Hep2O Push-fit plumbing system Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM Wavin Hep2O - Product List Content 1 Hep2O PB pipe page 3 2 Hep2O fittings page 4 3 Hep2O accessories page

More information

TRADE PRICE LIST 2018 ( )

TRADE PRICE LIST 2018 ( ) PL02-ROI PL01-NI NOVEMBER FEBRUARY 2018 2016 PLUMBING & DRAINAGE TRADE PRICE LIST 2018 ( ) UNDERGROUND RAINWATER SOIL CASCADE ROOFING www.brettmartin.com ORDERING IMPORTANT NOTES (Applicable to ROI Merchants

More information

technical catalogue

technical catalogue technical catalogue www.abka.net Grills and Drainage Channels User Area Stadium drainage practice Green area and garden drainage practice Garage drainage practice Swimming pool drainage practice Kasimpasa

More information

SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0

SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0 SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0 SCHEDULE 80 UPVC SCHEDULE 80 UPVC INDUSTRIAL PIPE SYSTEMS INDUSTRIAL PIPE SYSTEMS CORROSION RESISTANT PRESSURE PIPE RESISTANT TO MOST ACIDS,

More information

Dealer Price List. Effective date 1 January.

Dealer Price List. Effective date 1 January. Dealer Price List Effective date 1 January www.heunis.co.za We are proud to introduce our new price list offering you a comprehensive range of HIGH QUALITY RAINWATER GOODS, ROOF SHEETING, CEILING PRODUCTS

More information

a World of Connection PLASSIM FITTINGS

a World of Connection PLASSIM FITTINGS PLASSIM FITTINGS C A T A L O G U E Water Distribution 2 Irrigation 12 Telecom 22 Box sizes 27 x 18 x 24 cm A-2 x 28 x 24 cm A-3 48 x 33 x 24 cm A-4 51 x 41 x 41 cm A-5 48 x 33 x 27 cm A-6 51 x 41 x 41

More information

Below and Above Ground Systems

Below and Above Ground Systems Wavin Northern Ireland Trade List October 2016 Below and Above Ground Systems Contents Below and Above Ground Systems Introduction 3 Wavin Sewer 3 U-Drain Economy Fittings 4-5 Premium Sewer Pipe 7-9 and

More information

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only

More information

CPVC Hot and Cold Water System

CPVC Hot and Cold Water System CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard

More information

Sincerely, Your Partners at Specified Fittings

Sincerely, Your Partners at Specified Fittings N E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181

More information

Spare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7

Spare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing

More information

Wrot and Cast Pressure Fittings

Wrot and Cast Pressure Fittings Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................

More information

Modular system for ACO Bath gullies Easyflow

Modular system for ACO Bath gullies Easyflow Modular system for ACO page 54 f. Designer gratings Designer gratings Tileable surface Glass covers Page 67 Top section circular + detached thin bed flange Top section square + detached thin bed flange

More information

DR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY

DR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY LIST PC920180410 HARCO LIST ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version of this price list LIST PC920180410 HARCO LIST

More information

PRICE GUIDE TPL50 - May 2016

PRICE GUIDE TPL50 - May 2016 Above and Below Ground Drainage PRICE GUIDE TPL50 - May 2016 Including... UNDERGROUND SYSTEMS RAINWATER SYSTEMS Page Drains... 75 Fittings... 76 Hoppers... 83 Chambers... 85 Sewers... 89 Structured Wall...

More information

Sincerely, Your Partners at Specified Fittings

Sincerely, Your Partners at Specified Fittings N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181

More information

Viega PEX Manifold Plumbing Systems

Viega PEX Manifold Plumbing Systems Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100

More information

1.5 to 5 Tons INDOOR COILS C35. Upflow - Cased and Uncased PRODUCT SPECIFICATIONS C A - 2 F - 1 MODEL NUMBER IDENTIFICATION FEATURES

1.5 to 5 Tons INDOOR COILS C35. Upflow - Cased and Uncased PRODUCT SPECIFICATIONS C A - 2 F - 1 MODEL NUMBER IDENTIFICATION FEATURES INDOOR COILS C35 PRODUCT SPECIFICATIONS Upflow - Cased and Uncased Bulletin No. 20666 February 208 Supersedes November 206.5 to 5 Tons MODEL NUMBER IDENTIFICATION Unit Type C = Indoor Coil = Upflow Series

More information

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems

More information

Pak Arab HDPE-100 Pipe

Pak Arab HDPE-100 Pipe Pak Arab DPE-100 Pipe 20 mm to 630mm PN (4, 6.3, 8, 10, 12.5, 16, 20, 25, 32) DPE (igh density Polyethylene ) igh-density polyethylene (DPE) has a density that ranges from 0.94 to 0.97 g/cm3 (0.62 to 0.64

More information

BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525

BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525 Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16

More information

WC Connectors SECTION. WC Connectors

WC Connectors SECTION.  WC Connectors WC Connectors SECTION 5 WC Connectors 61 WC Connectors WC Connectors General McAlpine is the only European Manufacturer to offer EVA (Ethylene Vinyl Acetate), Rigid Polypropylene and Flexible Polypropylene

More information

MICROPHONE stands & accessories

MICROPHONE stands & accessories MICROPHONE stands & accessories 03 Microphone Stands & Accessories 300 SERIES MICROLITE MICROPHONE STANDS - Constructed with strong, lightweight Microlite tubular steel - Fast, smooth, non-slip boom swivel

More information

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories

More information

SharkBite 25 W ARRANTY Sh YEAR arkbite

SharkBite 25 W ARRANTY Sh YEAR arkbite 25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe

More information

resistance for high requirement

resistance for high requirement HEVY DUTY FLOOR OXES >>> NEW High resistance for high requirement For highly frequented areas, requiring important mechanical resistance and/or washing down. heavy duty in-screed floor box s 896 83 896

More information

R u b b e r d i s t r i b u t o r

R u b b e r d i s t r i b u t o r Rubber distributor The modular rubber distributor series We live in a fast-moving time. It is also frequently necessary to make modifications to power distribution systems. Power distributors used in industrial

More information

robust advanced technology Accessories » for mobile and stationary Ringler suction systems

robust advanced technology Accessories » for mobile and stationary Ringler suction systems www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection

More information

Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples

Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"

More information

PLUMBING PRODUCTS CATALOGUE COPPER TUBING. Intelligent housing technology

PLUMBING PRODUCTS CATALOGUE COPPER TUBING. Intelligent housing technology PLUMBING PRODUCTS CATALOGUE COPPER TUBING Intelligent housing technology CONTENTS 01 Triumph Taps Brassware 04 Triumph Taps Plastic 06 Triumph Plumbing 14 Triumph Spares 20 Triumph Fittings 26 31 33

More information

SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION

SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION A SUBSIDIARY F PNEUTECH GRUP SUPERIR ALUMINIUM CMPRESSED AIR RETICULATIN INDUSTRIAL AIR SYSTEMS NZ FREEPHNE: Email: sales@industrialair.co.nz Web: www.industrialair.co.nz SUPERIR ALUMINIUM CMPRESSED AIR

More information

SADDLES & SNAP-ON SADDLES

SADDLES & SNAP-ON SADDLES SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections

More information

1.5 to 5 Tons INDOOR COILS CH35. Horizontal PRODUCT SPECIFICATIONS CH A - 2 F MODEL NUMBER IDENTIFICATION FEATURES

1.5 to 5 Tons INDOOR COILS CH35. Horizontal PRODUCT SPECIFICATIONS CH A - 2 F MODEL NUMBER IDENTIFICATION FEATURES INDOOR COILS PRODUCT SPECIFICATIONS Horizontal Bulletin No. 20667 November 206 Supersedes August 206.5 to 5 Tons MODEL NUMBER IDENTIFICATION CH 35-8 A - 2 F Unit Type CH = Indoor - Horizontal Series Nominal

More information

Parts / Spares Reference Sheet

Parts / Spares Reference Sheet Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List SERIAL NUMBERS 730080-730074 ENGINE RELATED COMPONENTS... ENGINE RELATED COMPONENTS...3 ENGINE RELATED COMPONENTS...4 BASE, COVER... BASE, COVER... BASE, COVER...7 BASE, COVER...8

More information

nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia

nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner

More information

Viega Product Catalog. May The global leader. The global leader in plumbing, heating and pipe joining systems

Viega Product Catalog. May The global leader. The global leader in plumbing, heating and pipe joining systems Viega Product Catalog May 2014 The global leader The global leader in plumbing, heating and pipe joining systems Viega One source, multiple solutions Designed for peace of mind Viega manufactures and distributes

More information

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12

More information

National Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia

National Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical

More information

Viega Product Catalog PEX Press and PEX Crimp April The global leader. The global leader in plumbing, heating and pipe joining systems

Viega Product Catalog PEX Press and PEX Crimp April The global leader. The global leader in plumbing, heating and pipe joining systems Viega Product Catalog PEX Press and PEX Crimp April 2015 The global leader The global leader in plumbing, heating and pipe joining systems Viega One source, multiple solutions Designed for peace of mind

More information

LINC TORCH TIG TORCHES RANGE QUALITY MAKES THE DIFFERENCE

LINC TORCH TIG TORCHES RANGE QUALITY MAKES THE DIFFERENCE LINC TORCH TIG TORCHES RANGE QUALITY MAKES THE DIFFERENCE 2 LINC TORCHES LTP/LT RANGE TABLE OF CONTENTS WHAT S NEW RANGE / FEATURES / APPLICATIONS ERGO & ERGO FLEX MODELS LEVER MODELS VALVE MODELS RANGE

More information

MIRROR POLISHED POSTS See page 46

MIRROR POLISHED POSTS See page 46 PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.

More information

Q-Flow product information. Variable area flowmeters for gases and liquids

Q-Flow product information. Variable area flowmeters for gases and liquids Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,

More information

DWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS >

DWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS > Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > CSA B181.2 System 15 CAN/ULC S102.2 PVC is the most frequently specified

More information

PRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes

PRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes PRK Plastic pipe couplings Suitable for PEL, PEH and PEM pipes IMI TA / Couplings / PRK PRK This plastic pipe coupling is suitable for PEL, PEH and PEM pipes and can be used both above and underground.

More information

IP68 Sealed - Mini USB Buccaneer

IP68 Sealed - Mini USB Buccaneer IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB

More information

WITH ROLLED STOP COUPLING REDUCER C X C C

WITH ROLLED STOP COUPLING REDUCER C X C C Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread

More information

Contact Dial Thermometers

Contact Dial Thermometers Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless

More information

Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers

Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers DATA CENTER COOLING EXPERTISE Data Center managers have unique needs. Nortek Air Solutions listens

More information

Specification. Radiamatic Detectors and Accessories

Specification. Radiamatic Detectors and Accessories 4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with

More information

DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC

DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE OCTOBER 1, 2018 DWV-PVC 2 x FPT x MPT

More information

Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings

Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all

More information

Last Update: 1 July Version 3.0. Model # Valve Description - Flushbuy ULTRA & ULTRA Plus List Price

Last Update: 1 July Version 3.0. Model # Valve Description - Flushbuy ULTRA & ULTRA Plus List Price Model # Valve Description - Flushbuy ULTRA & ULTRA Plus List Price U402-1.28-SC-T42 U402-1.6-SC-T42 U402-3-SC-T42 U414-SC-T42 U414-1.28-SC-T42 U414-1.6-SC-T42 U414-3-SC-T42 U451-0.125-SC-T42 U451-0.5-SC-T42

More information

ASTRO 2 CIRCULATORS. ASTRO 2 3-Speed Circulators (except Astro 286):

ASTRO 2 CIRCULATORS. ASTRO 2 3-Speed Circulators (except Astro 286): DATE: January 30, 015 DATE: January 5, 014 ASTRO 3-Speed Circulators (except Astro 86): ASTRO CIRCULATORS IRON BODY CONSTRUCTION (Includes Check Valve) Model No. Part No. Connection List Price Wt.ea.lbs.

More information

Assembly and Maintenance

Assembly and Maintenance Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines

More information

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564 JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories

More information

DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC

DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE JANUARY 2, 2019 DWV-PVC 2 x FPT x MPT

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH

More information

09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD

09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD Air-Cooled Condensers/Air-Cooled Fluid Coolers 09LD/GD 09GD 09LD/GD Nominal cooling capacity 281-987 kw The 09LD air-cooled condensers are designed for refrigeration plants where a halogenated hydrocarbon,

More information

Viega Pexcel Water System

Viega Pexcel Water System Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page

More information

Full HD Speed Dome IP Camera

Full HD Speed Dome IP Camera Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its

More information

INDEX SECTION PAGE TYKOFLEX

INDEX SECTION PAGE TYKOFLEX INDEX SECTION TYKOFLEX Application Map for T240 outside plant closures Application Map for T240 outside plant closures - Continued T, TS, TSG for manholes, poles & tunnels Powerline Closures & Outdoor

More information

Air-Pro Blue Polyethylene (PE) Compressed Air Piping System

Air-Pro Blue Polyethylene (PE) Compressed Air Piping System - Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),

More information

DAIKIN GAS TIGHT JOINT (DGT)

DAIKIN GAS TIGHT JOINT (DGT) LINE UP Model Name Size (mm) DAIKIN GAS TIGHT JOINT (DGT) SPECIFICATIONS BDGTA06 ø 6.4 BDGTA06 ø 9.5 BDGTA12 ø 12.7 BDGTA15 ø 15.9 BDGTA19 ø 19.1 BDGTA22 ø 22.2 BDGTA28 ø 28.6 DAIKIN GAS TIGHT JOINT Applicable

More information

SECTION FIVE - SANITARY - MANHOLES

SECTION FIVE - SANITARY - MANHOLES Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD

More information

CODE OF PRACTICE FOR CITY INFRASTRUCTURE and LAND DEVELOPMENT ENGINEERING STANDARDS MANUAL SECTION 8

CODE OF PRACTICE FOR CITY INFRASTRUCTURE and LAND DEVELOPMENT ENGINEERING STANDARDS MANUAL SECTION 8 CODE OF PRACTICE FOR CITY INFRASTRUCTURE and LAND DEVELOPMENT ENGINEERING STANDARDS MANUAL SECTION 8 INFORMATION COMMUNICATIONS TECHNOLOGY INFRASTRUCTURE TABLE OF CONTENTS 8.1. Scope 3 8.2. Introduction

More information