RSS Series Wired Electronic Ballasts
|
|
- Morgan McCarthy
- 6 years ago
- Views:
Transcription
1
2 RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz RSS Installation Wiring Diagrams* DIAGRAM 1 DIAGRAM 2 DIAGRAM 3 For 800mA T12/HO Standard No. of Wiring Diagram 1 to 2 4' 16' RSS296AT* 120V ,2 2 to 4 8' 32' RSS496AT** 120V to 6 24' 48' RSS696AT*** 120V Lamp Combination 2-Lamp Combination 2-Lamp Combination /White No. of RSS Ballast Chart For 800mA T8/HO Standard *For use with 1 10 lamp. **For use with 2 10 lamps. ***For use with 4 10 lamps. Wiring Diagram 1 to 2 4' 12' RSS296AT 120V ,2 2 to 4 8' 24' RSS496AT 120V to 6 18' 36' RSS696AT 120V DIAGRAM 4 3-Lamp Combination /White 4-Lamp Combination /White /White DIAGRAM 5 DIAGRAM 6 4-Lamp Combination CAT# T8/T12 # of lamps RSS296AT T8 1-2 T Total Lamp Range (Feet) RSS296AT (T8) RSS296AT (T12) RSS496AT T8 2-4 T RSS496AT (T8) RSS496AT (T12) RSS696AT T8 4-6 T RSS696AT (T8) RSS696AT (T12) Dimensions and Weights DIAGRAM 7 DIAGRAM 8 CAT # Lead Length (Feet) Dimensions (inches) Black White Length Width Height Weight (lb) RSS296AT /4 3-3/ / RSS496AT /16 3-3/16 2-5/ RSS696AT /2 3-3/16 2-5/ /White 5-Lamp Combination /White 6-Lamp Combination L Lamp 5 Side View H Top View Lamp 5 Lamp 6 2 *RSS Diagrams above can easily be used in both new installation and magnetic to electronic replacement applications. All ballasts must be grounded. 3
3 EESB Parallel Wired s Specifications Charts EESB Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of For 800mA T12/HO Standard Wiring Diagram 1 18" 8' EESB L 120V ,7 1 to 3 4' 24' EESB L 120V ,9 1 to 6 8' 32' EESB L 120V ,10 1 to 4 10' 40' EESB L * 120V ,11 2 to 6 10' 48' EESB L*** 120V ,12 For use with T12 HO, T8 HO, and Slimline 120/220/240/277 Volts, 50/60Hz No. of 1 to 4 1 to 2 2' 16' 4' 32' 1 to 6 2' 50' 2 to 6 10' 48' For 800mA T12/HO Standard 120V EESB-021L V 208V V V V EESB L V 208V V V V EESB L V** 208V V V V EESB L V* 208V V V Wiring Diagram For use with T12 HO, T8 HO, T8 18K hours Medium Life, and Slimline 120/220/240/277 Volts 50/60/Hz No. Of 1 to 2 2' 12' For 375mA T8 HO Medium Life 120V EESB-021L V 208V V V V EESB L V 208V V V V EESB L V 208V V V V V V V Wiring Diagram 1 to 4 4' 24' to 6 2' 48' 2 to 6 10' 48' *For use with up to 4 10 lamps **For use with up to 5 10 lamps ***DO NOT use 10 lamps EESB L V* 2-8 For use with T12 HO, T8 HO, T8 50K hours Long Life, and Slimline 120/220/240/277 Volts 50/60/Hz No. Of 1 to 6 2' 48' For 315mA T8 Long Life Lamp Wiring Diagram 120V V EESB L V 240V V
4 EESB Parallel Wired s EESB Ballast Chart EESB New Installation Wiring Diagrams CAT # T8/T12 # of lamps EESB L T8 1 T Total Lamp Range (Feet) EESB L (T8) EESB L (T12) DIAGRAM 1 DIAGRAM 2 DIAGRAM 3 EESB L T8 1-3 T EESB L (T8) EESB L (T12) EESB L T8 1-6 T EESB L (T8) EESB L (T12) EESB L T8 1-4 T EESB L (T8) EESB L (T12) EESB L T8 2-6 T EESB L (T8) EESB L (T12) EESB-021L V T8 1-2 T EESB-021L V (T8) EESB-021L V (T12) DIAGRAM 7 DIAGRAM 8 DIAGRAM 9 EESB L V T8 1-4 T EESB L V (T8) EESB L V (T12) EESB L V T8 1-6 T T8 Long Life 1-6 EESB L V (T8) EESB L V (T12) EESB L V (T8 Long Life) EESB L V T8 2-6 T EESB L V (T8) EESB l V (T12) Dimensions and Weights CAT # Lead Length (Feet) Dimensions (inches) Black White Length Width Height Weight (lb) EESB L /2 2-3/8 1-5/8 8-7/8 2 EESB L / /4 11-1/8 5 EESB L / /4 13-3/4 8 EESB L / /4 13-3/4 8 EESB L / /4 13-3/4 8 EESB-021L V /2 2-3/8 1-5/8 8-7/8 2.5 EESB L V / /4 13-3/4 9.5 EESB L V / /4 13-3/4 8 EESB L V / /4 13-3/4 9 DIAGRAM 4 DIAGRAM 5 DIAGRAM 6 DIAGRAM 10 DIAGRAM 11 DIAGRAM 12 * * L Side View H 6 Top View *Designed for use with lamps up to 10 in length. Wiring diagrams for Allanson Lighting Components' EESB s are simpler, with half the connections found in old-style magnetics. are parallel wired, so if one burns out the others keep working. All ballasts must be grounded. 7
5 EESB Parallel Wired s Fluorescent H.O. Lamp Holders EESB Magnetic to Electronic Re-Wiring Diagrams Tombstone Lamp Holders DIAGRAM 1 DIAGRAM 2 EESB- 021L (2-LAMP MAGNETIC TO ELECTRONIC) EESB L (3-LAMP MAGNETIC TO ELECTRONIC) Black White 2-Lamp Black White 3-Lamp /White /White Flush Mount Lamp Holders DIAGRAM 3 DIAGRAM 4 EESB L & EESB L (4-LAMP MAGNETIC TO ELECTRONIC) EESB L/ V, EESB L, & EESB L (6-LAMP MAGNETIC TO ELECTRONIC) 4-Lamp /white 6-Lamp Lamp 5 Lamp 6 \White Lamp holder Ratings: 660W, 600V / 1000V rating For a live demonstration, watch our Magnetic to Electronic Replacement Video. Materials: GE resins, Ni plated steels, stainless steels, O ring, and tin bronze contacts were used in the manufacturing of Allanson lamp holders. The 12 lead assemblies are stranded 18AWG tinned copper and have 1015/1032 UL ratings 221 F (105 C) and 1000V. : High strength metal retaining clips ensure solid hold when installed per specifications. D Hole: Visit culus listed. UL listed for use in U.S.A and Canada. 8 9
6 DOE Ballast Cross Reference Chart s Allanson Universal France Advance 148-AT DR 196-AT DR 224-AT DR AT DR ASB BL-TP 296-AT DR 348-AT DR 372-AT DR DR 396-AT DR 448-AT DR ASB BL-TP AT DR ASB BL-TP 496-AT DR ASB BL-TP 4120-AT DR ASB BL-TP 572-AT DR 648-AT DR 672-AT DR ASB BL-TP 696-AT KR ASB BL-TP Electronic Replacement Transco RSS EESB TRA ' - 4' RSS296AT EESB L / EESB-021L V " - 8' RSS296AT EESB L / EESB-021L V TRA " - 8" RSS296AT EESB-021L V --- 2' - 4' RSS296AT EESB-021L V TRA ' - 12' RSS296AT EESB L / EESB-021L V TRA ' - 16' RSS296AT EESB L / EESB-021L V TRA ' - 12' EESB L / EESB-021L V --- 6' - 12' EESB L / EESB-021L V TRA ' - 20' RSS496AT EESB L / EESB L V TRA ' - 24' RSS496AT EESB L / EESB L V TRA ' - 18' RSS496AT EESB L / EESB L V ' - 24' RSS496AT EESB L / EESB L V TRA ' - 24' RSS496AT EESB L / EESB L V TRA ' - 32' RSS496AT EESB L / EESB L V TRA ' - 40' RSS696AT EESB L / EESB L V ' - 30' RSS696AT EESB L / EESB L V TRA ' - 24' EESB L / EESB L V TRA ' - 36' RSS696AT EESB L / EESB L V TRA ' - 48' RSS696AT EESB L / EESB L V 148-AT-277V 168 KR 196-AT-277V 268 KR 272-AT-277V 268 KR 296-AT-277V 288 KR 348-AT-277V 348 KR 372-AT-277V 368 KR 396-AT-277V 388 KR 448-AT-277V 448 KR 472-AT-277V 468 KR 496-AT-277V KR 4120-AT-277V 4128 KR 572-AT-277V 568 KR 648-AT-277V 668 KR 672-AT-277V 668 KR 696-AT-277V 688 KR 2' - 4' --- EESB-021L V 18" - 8' --- EESB-021L V 4' - 12' --- EESB-021L V 12' - 16' --- EESB-021L V 6' - 12' --- EESB L V 6' - 12' --- EESB L V 18' - 24' --- EESB L V 8' - 18' --- EESB L V 16' - 24' --- EESB L V 24' - 32' --- EESB L V 20' - 40' --- EESB L V 20' - 30' --- EESB L V 8' - 24' --- EESB L V 24' - 36' --- EESB L V 30' - 48' --- EESB L V *EESB L V Ultimate Ballast Replaces all models
RSS Series Wired Electronic Ballasts
REV 02/16 RSS Series Wired s Specifications Charts RSS Installation Wiring Diagrams RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of Lamp Circuits
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz Per Circuit Combined
More informationEESB Parallel Wired Electronic Ballasts
EESB Parallel Wired s Specifications Charts EESB Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of For 800mA
More informationHOW TO READ AN ELECTRONIC SIGN
ELECTRONIC SIGN Ballasts CONTENTS 208 209 209 210 211 211 How To Read a Table T8/HO Sign Ballasts T12/HO Sign Ballasts Case Dimensions and Wiring Diagrams Cross Reference Guide Lamp Compatibility Specifications
More informationAllPro Hazardous/Corrosive Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 1 & 2 - Groups E, F & G CSA - 4X UL 844 - Class I Div. 2 - Groups A, B, C, & D UL 4X UL - Outdoor
More informationThrough-Board SMD PCB Terminal Block; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series
Volume, Section SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block; 0.75 mm² 070 Series SMD PCB terminal blocks with Push-in CAGE CLAMP connection for back-side wiring of LED modules Low profile
More informationCat.8 Shielded Keystone Jack Description
Description RiT s CAT8 Shielded Keystone Jacks are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations. Phosphor
More informationVersaPro Non-Metallic Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Class III CSA - Type 3 R Enclosed & Gasketed Features: Non-Metallic Fluorescent
More informationA3000, LP3000 & CB3000
A3000, LP3000 & CB3000 Dimensions Inches (Millimeters) A3000 & LP3000 A31930307 LP307102 Specifications Rating: A3: 30A, 600V* LP3: 30A, 150V* CB3: 30A, 600V* Wire Range: #12-22 AWG Cu Center Spacing:
More informationGround Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /
2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power
More informationOne Phase Power Distribution Block
Quick mounting and wiring Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to and ) No caps
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More informationConnector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
More informationA2000, LP2000 & CB2000
A2000, LP2000 & CB2000 Dimensions Inches (Millimeters) A2000 & LP2000 A203504 LP201204 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range:
More informationCat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
More informationTerminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationA0 & CB0. Single Row Terminal Blocks. Dimensions- Inches (Millimeters) Specifications CB0
A0 & CB0 Dimensions- Inches (Millimeters) A0 0.12 (3.0) Ø A00110407 0.250 (6.35) Specifications Rating: 10 A, 300 V Center Spacing: 0.25 (6.35 mm) Wire Range: #16-30 AWG Screw Size: M3.0 nickel-plated
More informationPROJECT: SPECIFIER: TYPE: QTY: OUTPUT LEVEL: COLOR: LENGTH X WIDTH: MOUNTING: DIMMING/CONTROLS:
PROJECT: SPECIFIER: TYPE: QTY: Available in 5 output levels of Static White at 24 Volts RGB and RGBW available at 24 Volts Tunable White and Double Sided available Great for creating Luminous Ceilings
More informationDiffuser Color (when not illuminated) Light amber hue
PRODUCT SUMMARY PRODUCT FEATURES Four Kelvin temperatures Energy efficient Long lifetime Stable and consistent color temperature Low voltage Easy to install Cool to the touch For use as exterior or interior
More informationMale connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
More informationMax. Input Power (W) Inrush Current (A pk /µs)
Output Power (W) Output Voltage (V) Output Current (A) Tcase Max Input Current (A) Max. Input Power (W) Inrush Current (A pk /µs) Max. THD (%) Min. Power Factor Surge Protection (KV) Weight (Lbs) Envir.
More informationLinear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
More informationTerminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32
More informationMax. Input Power (W) Input Current. Inrush Current
Output Power (W) Output Voltage (V) Output Current (A) Efficiency Tcase Max Input Current Max. Input Power (W) Inrush Current (Apk/µs) Max. THD (%) Min. Power Factor Surge Protection (KV) Weight (Lbs)
More informationA2, LP2 & CB2. Single Row Terminal Blocks. Dimensions Inches (Millimeters) Specifications A2 & LP2 CB2
A2, LP2 & CB2 Dimensions Inches (Millimeters) A2 & LP2 LP201204 A203504 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG
More informationMedium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
More informationFLUORESCENT FIXTURES
FLUORESCENT FIXTURES J7WRAP2/32ISMV 7.5 STANDARD WRAPAROUND FIXTURE 2 x 32W, Instant Start, 120-277V, 50/60Hz, Electronic T8 Ballast, 48 in length Nominal 8" width with a shallow design Clear acrylic diffuser
More informationTelephone Accessories USA / Canada - Telefon-Zubehör
7590 01 Standard Flush Mount Jacks Flush mount jacks are available in smooth-finish single-jack or duplex models, and Decora styles. ll feature one-piece construction and install easily in standard electrical
More informationModel Number AC-60CD1.4APPU
ELECTRICAL SPECIFICATIONS: Programmable, Digital, Wide-Range Ajustable Current & Dimming Class P Listed Constant Current LED Driver Model Number AC-6CD.4APPU Input Voltage: 2-277V Input Frequency: 5/6Hz
More informationCase Expansion Transducer Systems
Case Expansion Transducer Systems Product Datasheet Bently Nevada* Asset Condition Monitoring Description Thermal Case Growth Measurements in Large Turbines An important position measurement in Turbine
More informationChemical Resistant Inductive Prox
Chemical Resistant Inductive Prox Fluoroplastic Housing Sensor Performs Accurately Under Harsh Environmental Conditions Full body resin housing and nuts resist weld spatter Rugged watertight fluoroplastic
More informationLinear Luminaire with LED Series 6412/5
> For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
More informationGV-EL124S Electric Strike
GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either
More informationArrakis 30 - Monochromatic Model No: ARR US
Arrakis 30 Monochromatic Model No: ARR.003.36.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding 'INT' at the
More informationBulletin 855E 50 mm Control Tower Stack Lights
Bulletin 855E 50 mm Control Tower Stack Lights Light Modules Sound Modules Flashing Incandescent 855E 10 FN 4 Voltage Light Module Type Lens Color 00 0 250V AC/DC (no lamp module) (1) XN Steady no lamp
More informationMetering Devices IQ 300
Effective: May 2001 Page 1 New Information Contents Description Page General Description......... 2 Specifications.............. 3 Field Wiring Connections.... 4 Page 2 Effective: May 2001 Applications
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationCompact Fluorescent Lampholders
Table of Contents GR14q 26.738 [03] 14, 15 GZ16q 26.739 [03] 16 G23 26.719 [03] 17-19 26.721 [03] 17, 18 GX23 / GX23-2 26.720 [03] 20, 21 Supports for TC-S lamps 26.719 [03] 22-24 G24 / GX24 26.745 [03]
More informationLED-HCNA-0024V-41-F-L-O
Electrical Specifications LED-HCNA-0024V-41-F-L-O Output Power (W) Output Voltage (V) Output Current (A) Tcase Max Input Current (A) Max. Input Power (W) Inrush Current (A pk /µs) Max. THD (%) Min. Power
More informationMax. Input Power (W) Inrush Current (A pk /µs) LED ARRAY
Electrical Specifications LEDINTA0024V41DLO Max. Power (W) Voltage (V) Current (A) Tcase Max Input Current (A) Max. Input Power (W) Inrush Current (A pk /µs) Max. THD (%) Min. Power Factor Surge Protection
More information18W Triple 35W T4.5 G8.5 Halogen T10 100W
BLITZ 182 BLITZ BLITZ is a very versatile fixture. With a choice of one to four windows, the BLITZ can be striking even when used singly, however, the combination of choice of optic and dichroic colored
More informationRJHS Series. RJ vistatm. EMI Quiet Modular Jacks with LED s. Specifications. Ordering Information EMI QUIET - WITH LEDS
EMI Quiet Modular Jacks with LED s is a family of EMI Quiet Modular Jack Connectors with built-in LEDs, meets Ethernet CAT 5 performance. This product is ideal for LAN applications such as adapter cards
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More information25DTP412 12'5" Tele-Powr Pole. Features Made in USA. Material, Color, and Finish. Dimensions and Weight
25DTP412 12'5" Tele-Powr Pole Wiremold/Legrand Catalog Number 25DTP412 Manufacturer Wiremold/Legrand Description Tele Power Pole, Factory Wired; Shape Rectangular; 2 Compartment(S); 2 Outlet(S); Outlet
More informationCommodore SS Model CD General Specifications
Commodore SS Model CD50200 General Specifications 0 0 0 0 0 3 0 0 0 0 0 3 Rev.4 02-02-17 Marina Electrical Equipment, Inc. 100 Warwick Court Williamsburg, VA 23185 Toll Free: 1-855-258-3939 Fax: 1-757-258-3988
More informationPlexineon Color Series
PRODUCT SUMMARY PRODUCT FEATURES Bright, even-toned color Durable construction Long life Energy efficient Low voltage Easy to install Cool to the touch For use as exterior or interior accent lighting,
More informationASSET LGA1366 Top-side Probe
ASSET LGA1366 Top-side Probe (Manual version 1.1) For gaining test access to the debug port of Intel processors that are designed for use in LGA1366 Sockets (Socket B). These include the Intel Core i7
More informationInstruction Bulletin. Fiber Optic Switch Packs. SLSPSP101 and SLSPSP102 for use with Luminaires INTRODUCTION CONTENTS OF THE BOX
Instruction Bulletin 63249-500-04A3 07/2010 Fiber Optic Switch Packs SLSPSP101 and SLSPSP102 for use with Luminaires INTRODUCTION SLSPSP101 Single Input Switch Pack SLSPSP102 Dual Input Switch Pack The
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationHIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR
HIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR Product Overview The HB3x0 series occupancy sensors are designed for automatic lighting control in high bay applications. All models contain a passive infrared
More informationAGSF-L GUIDANCE SIGNS. FAA LED Light Bar Airfield Guidance Sign. Compliance with Standards. Features. Uses. Construction.
FAA LED Light Bar Airfield Guidance Sign Compliance with Standards FAA: Uses L-8Y(L), L-8R(L), L-8L(L) and L-8B(L) AC 50/55- (Current Edition) and the FAA Engineering Brief No. 67. ETL Certified. FAA L-8Y(L)
More informationindustrial panel lamps
features specifications Typical characteristics (Ta = C) Ø8.1mm mounting Robust bright nickel plated brass housing Low profile styling, sunlight readable LEDs Sealed to IP67 Internal reverse protection
More informationSwitches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
More informationRigel 3000K - Optics 13 LED Spot - White Model No: RIG US
Rigel 3000K Optics 13 LED Spot White Model No: RIG.003.01.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding
More information* Optional TLPC shown. Mounting for Square Pole ORDERING INFORMATION 72W 108W 141W 188W 108LED 141LED 188LED. DM 0-10V Dimming. (Std.
Revised: 11.1.16 LED AREA / PARKING / STREET LIGHT LAP-G APPLICATION For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More information920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
More informationTekno 3x1W DWCS - Transparent Screen Model No: TEK US
Tekno 3x1W DWCS Transparent Screen Model No: TEK.304.23.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding 'T'
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationD10CC150HV10F. HRV ( V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control.
HRV (347 480V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control Performance Input Voltage 347 ~ 480 Vac ± 10% Input Current Max 0.48 /347V 0.34/480V Input
More informationINDICATOR LIGHTS SECTION R INDICATOR LIGHTS. Rectangular Indicator Lights. Round AC LED Indicator Lights. Large Format Indicator Lights
SECTION R Rectangular Indicator Lights Round Indicator Lights Large Format Indicator Lights Round DC LED Indicator Lights Round AC LED Indicator Lights Flashing Series LED Lights R3 R4 - R6 R7 R8 - R10
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationHeavy Duty Terminal Blocks
General Information: are available in two styles Deadfront Type (1100, 1200, 985 and 0987 series) and Barrier Type (1500, 1600 and 1700 series). Ratings and Standards: The voltage ratings of terminal blocks
More informationMax. Input Power (W) Inrush Current (A pk /µs)
Electrical Specifications LEDINTA0024V41FLO Output Power (W) 100 Output Voltage (V) 24 cv 3.5~24 cc Output Current (A) 0.10~4.16 cv 4.16 cc Tcase Max cv = constant voltage mode, cc = constant current mode
More informationInstallation Manual Rev D MiniProx Readers - Wiegand 5365B and Clock and Data 5368B
Installation Manual - 5365-902 Rev D MiniProx Readers - Wiegand 5365B and Clock and Data 5368B Web page, E-mail - www.prox.com MiniProx Reader Installation Manual 5365-902 REV D 1 of 7 MiniProx Reader
More informationSSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
More informationCombo 2 Port Usb Receptacle 15A 125V Iv 15A 125V 2P IV USB RECEPT COMBO 2 PORT USB RECEPTACLE 15A 125V IV
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com TR7740VB0X 15A 125V 2P Iv Usb Recept Cooper Wiring Devices Catalog Number Manufacturer
More informationSBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
More informationReplacing the Power Supply
APPENDIX B This appendix includes information on how to replace the power supply for the Cisco AS550XM universal gateway and contains the following sections: Safety Recommendations, page B-1 Required Tools
More informationNEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationGENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
More informationRight angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More informationPreliminary. Sensors. EasySense. Fixture-Mount for Networks
Sensors EasySense Fixture-Mount for Networks EasySense for networks is based on zigbee technology for use in wireless systems for indoor connected lighting. It provides a simple solution to actively manage
More informationSECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying AeroLift motorized projector lifts and their installation. The Specifier needs to edit these
More informationINSTALLATION MANUAL. ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera
INSTALLATION MANUAL ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera PACKAGE CONTENTS This package contains: One ST-BTWD650IR2812 camera with Black or White housing One extension tube
More informationBulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationElectrical Interconnection
Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation
More informationEcoSystem One-Line. EcoSystem C5-XPJ-16A Switching Power Module
EcoSystem Switching Power Module for Non-Dim Loads LutronR Switching Power Module allows integration of non-dim loads into Lutron s Bus. The Power Module combines digital commands and sensor data to control
More informationItem No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
More informationNT-2300 Series Dual Circuit Track System & Accessories
ILLUMINATING THE FUTURE...SINCE 1989 NT-2300 Series Dual Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated
More informationGadget Freak Case #238: Controller Adjusts Garage Lights Build Instructions
Gadget Freak Case #238: Controller Adjusts Garage Lights Build Instructions The schematic diagram shows the main garage-light switch (SW1) that turns on both fluorescent lamps, Lamp 1 and Lamp 2. Only
More informationBulletin 854K 60 Mm Control Tower Stack Lights
Bulletin 854K 60 Mm Control Tower Stack Lights UL Type 4/4X/13, IP66 "No tools" lens assembly Surface, vertical, M20 threaded tube, quick release base, 1/2 in. NPT, double-sided base, M12 (5-pin DC) micro
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationSP1 MP1 WP2 WP1. 125kHz reader models with the following prefixes: 13.56MHz reader models with the following prefixes:
DOC0067 Issue 1.2 Reader Wiring InSTRUCTIONS SP1 MP1 WP2 WP1 125kHz reader models with the following prefixes: 13.56MHz reader models with the following prefixes: MP1-EM1 MP1-HT1 MP1-DP1 WP1-EM1 WP1-HT1
More informationModular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
More informationField-terminated RJ45 connector with housing. Color housing: gray (RAL 7042). Color termination block: red.
FM45 Connector Cat. 6 A IP20, 4P, TIA 568-A/B, 10x R815651 966704105 10 Stk. 090.7437 / ähnliche Abbildung Instruction manual Field-terminated connector with housing. Color housing: gray (RAL 7042). Color
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationExiway One LED Technical specifications Activa and Dardo versions
One LED Activa and Dardo versions DB122858 DB12300 P10675 Versions Activa Dardo It Es Be e,, e Protection rating IP65 IP65 Fresnel cover glass Autonomy 1 h 2 h Adaptale exit sign Average flux in emergency
More informationASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
More informationPower Boosters and 120 V Interfaces
Power Boosters and Interfaces 4/8/ Wireless Series Power Interfaces N/A N/A Power Boosters and Interfaces work with specific load types and/or increase the zone capacity of Wired Vareo Local Lighting Controls,
More informationHIGH DENSITY TERMINAL BLOCKS
CONTROL LOGIC HIGH DENSITY TERMINAL BLOCKS c3controls new line of High Density terminal blocks are both innovative and user-friendly. Available in multiple terminal points from 4, 6, and 12 in a single
More informationFree Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit
Document No. 155-324 Free Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit Description Features Application Product Number Room temperature controller for four-pipe fan coil units.
More informationPush Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More information