CALL NOW

Transcription

1

2 WARRANTY TERMS FOR WEG AUTOMATION PRODUCTS (All standard WEG terms and conditions apply to all orders) WEG Automation products are warranted aainst defects in workmanship and materials for eihteen (18) months from invoicin date if the followin requirements are met: Suitable transportation, handlin and storae; Correct installation within the specified environmental conditions and without the presence of: Direct exposure to sunliht, rain, hih humidity, or sea-air Inflammable or corrosive ases or liquids Excessive vibrations Dust, metallic particles, and oil mist See your user manual for additional installation requirements Operation within the desined capacity limits Performance of scheduled preventive maintenance Repairs and/or modifications only made by authorized WEG service, proof required for warranty In the case of any deficiency, the equipment must be available for sufficient time for the technician to identify the cause of the failure and undertake the proper repairs The purchaser must report any faults immediately so that WEG Automation can verify the workmanship or material failure. Repair services durin the warranty period may be made, at WEG s discretion, at the purchaser s location, at an Authorized Service Center (ASC) if available, or at a WEG Electric facility. WEG may, at their discretion, choose to pay for disassemblin and assemblin services, product or part transportation costs, travel tickets, hotel accommodations, food expenses and overtime of service employees, when the services are performed at the customer's facilities. Fuses and other components in which the useful life in normal use is shorter than the warranty period are excluded from this warranty. Repairs and /or replacements of parts or products made within the warranty period do not prolon the oriinal warranty period. The warranty is limited to only the supplied product; WEG shall not have any obliation for personal injuries to third parties, damae to other equipment or facilities, loss of profits or consequential damaes. For specifics on the warranty processin, or for a list of devices included in this listin, please contact the Warranty/Service Department at warranty@we.net A ASK-4WEG Data is subject chane without notice.

3 Optimal Match Warranty WEG Optimal Match Warranty is a thirty-six (36) month warranty available when a low voltae motor is applied with a WEG low voltae drive or soft starter. In order to qualify for the warranty, the products must be reistered and approved by WEG's warranty department with this form. Drives and motors that qualify for this Optimal Match Warranty are W22 motors coupled with CFW11 up to 600HP (720A); all CFW700; all CFW08; and all CFW09 drives. Soft starters and motors that qualify for this Optimal Match Warranty are W22 motors coupled with SSW06 up to 550HP (670A); SSW07 soft starters. This offer is available in the U.S. only. Please fill in the followin information completely, otherwise this application will be void. Please send this form to warranty@we.net or fax it to WEG Service Department at (678) This reistration form is also available online. Go to and click on optimal warranty Date Store # Company Account # Contact Location of Application Address City State Zip Order Information Purchase Date Order # Product Information (Once reistered further information may be needed) Drive Motor Model # Model # Serial # Serial # Invoice # Invoice # 6655 Suarloaf Parkway, Duluth, GA, Phone Data is subject to chane without notice. WEG Automation - Products and Solutions A-3

4 WEG W22 TEFC Severe Duty Motor WEG Rolled Steel Motor WEG Matched Automation Product HP RPM Frame Voltae Hih Efficiency Enclosure Ratin: IP55 NEMA Premium Efficiency Enclosure Ratin: IP55 Rolled Steel Hih Efficiency Enclosure Ratin: Rolled Steel NEMA Premium Enclosure Ratin: Non-Combination Direct-on-line Starter Enclosure Ratin: NEMA 1 Non-Combination Direct-on-line Starter Enclosure Ratin: NEMA 1,2,12,3,3R,4 & 4X 1/4 1/3 1/2 3/ Foot Mount Foot Mount Foot Mount Foot Mount Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V / ES3EB / ES3EB / ES3EB56 ESW-9V24A-R / ES3EB56 ESW-9V24A-R / ES3EB56 ESW-9V47A-R / ES3EB56 ESW-9V47A-R / ES3EB56 ESW-9V47A-R / ES3EB56 ESW-9V24A-R / ES3EB56 ESW-9V24A-R / ES3ED56 ESW-9V24A-R / ES3EB56 ESW-9V24A-R26 ESW-9V47A-R24 PESW9V24AX-R26 PESW9V47AX-R / ES3ED56 ESW-9V24A-R26 ESW-9V47A-R24 PESW9V24AX-R26 PESW9V47AX-R T / ET3E143T-W ET3ERS143T ESW-9V24A-R26 ESW-9V47A-R24 PESW9V24AX-R26 PESW9V47AX-R / ES3EF56 ESW-9V24A-R26 ESW-9V47A-R24 PESW9V24AX-R26 PESW9V47AX-R T / ET3E145T-W ET3ERS145T ESW-9V24A-R26 ESW-9V47A-R24 PESW9V24AX-R26 PESW9V47AX-R T / ET3E143T-W ET3ERS143T ESW-9V24A-R27 ESW-9V47A-R25 PESW9V24AX-R27 PESW9V47AX-R / ES3ED56 ESW-9V24A-R27 ESW-9V47A-R25 PESW9V24AX-R27 PESW9V47AX-R T / ET3E145T-W ET3ERS145T ESW-9V24A-R27 ESW-9V47A-R25 PESW9V24AX-R27 PESW9V47AX-R T / ET3E182T-W ET3ERS182T ESW-9V24A-R27 ESW-9V47A-R25 PESW9V24AX-R27 PESW9V47AX-R T / ET3E145T-W ET3ERS145T ESW-9V24A-R28 ESW-9V47A-R26 PESW9V24AX-R28 PESW9V47AX-R / ES3EF56 ESW-9V24A-R28 ESW-9V47A-R26 PESW9V24AX-R28 PESW9V47AX-R T / ET3E145T-W ET3ERS145T ESW-9V24A-R28 ESW-9V47A-R26 PESW9V24AX-R28 PESW9V47AX-R T / ET3E184T-W ET3ERS184T ESW-9V24A-R28 ESW-9V47A-R26 PESW9V24AX-R28 PESW9V47AX-R T / ET3E182T-W ET3ERS182T ESW-9V24A-R29 ESW-9V47A-R27 PESW9V24AX-R29 PESW9V47AX-R T / ET3E182T-W ET3ERS182T ESW-9V24A-R29 ESW-9V47A-R27 PESW9V24AX-R29 PESW9V47AX-R T / ET3E213T-W ET3ERS213T ESW-9V24A-R29 ESW-9V47A-R27 PESW9V24AX-R29 PESW9V47AX-R T / ET3E184T-W ET3ERS184T ESW-18V24A-R32 ESW-9V47A-R28 PESW18V24AX-R32 PESW9-V47AX-R T / ET3E184T-W ET3ERS184T ESW-18V24A-R32 ESW-9V47A-R28 PESW18V24AX-R32 PESW9-V47AX-R T / ET3E215T-W ET3ERS215T ESW-18V24A-R32 ESW-9V47A-R28 PESW18V24AX-R32 PESW9-V47AX-R T / ET3E213T-W ET3ERS213T ESW-25V24A-R33 ESW-12V47A-R30 PESW25V24AX-R33 PESW12V47AX-R T / ET3E213T-W ET3ERS213T ESW-25V24A-R33 ESW-12V47A-R30 PESW25V24AX-R33 PESW12V47AX-R T / ET3E254T-W ET3ERS254T ESW-25V24A-R33 ESW-12V47A-R30 PESW25V24AX-R33 PESW12V47AX-R T / ET3E215T-W ET3ERS215T ESW-32V24A-R34 ESW-18V47A-R32 PESW32V24AX-R34 PESW18V47AX-R T / ET3E215T-W ET3ERS215T ESW-32V24A-R34 ESW-18V47A-R32 PESW32V24AX-R34 PESW18V47AX-R T / ET3E256T-W ET3ERS256T ESW-32V24A-R34 ESW-18V47A-R32 PESW32V24AX-R34 PESW18V47AX-R T / ET3E254T-W ET3ERS254T ESW-50V24A-R38 ESW-25V47A-R33 PESW50V24AX-R38 PESW25V47AX-R T / ET3E254T-W ET3ERS254T ESW-50V24A-R38 ESW-25V47A-R33 PESW50V24AX-R38 PESW25V47AX-R T / ET3E284T-W22 ESW-50V24A-R38 ESW-25V47A-R33 PESW50V24AX-R38 PESW25V47AX-R T / ET3E256T-W ET3ERS256T ESW-65V24A-R39 ESW-32V47A-R34 PESW65V24AX-R39 PESW32V47AX-R T / ET3E256T-W ET3ERS256T ESW-65V24A-R39 ESW-32V47A-R34 PESW65V24AX-R39 PESW32V47AX-R T / ET3E286T-W22 ESW-65V24A-R39 ESW-32V47A-R34 PESW65V24AX-R39 PESW32V47AX-R34 A ASK-4WEG Data is subject chane without notice.

5 HP RPM Frame Voltae WEG W22 TEFC Severe Duty Motor WEG Rolled Steel Motor WEG Matched Automation Product Hih Efficiency Enclosure Ratin: IP55 Foot Mount NEMA Premium Efficiency Enclosure Ratin: IP55 Foot Mount Rolled Steel Hih Efficiency Enclosure Ratin: Foot Mount Rolled Steel NEMA Premium Enclosure Ratin: Foot Mount Non-Combination Direct-on-line Starter Enclosure Ratin: NEMA 1 Motor Wired for 230 Motor Wired for 460V Non-Combination Direct-on-line Starter Enclosure Ratin: NEMA 1,2,12,3,3R,4 & 4X Motor Wired for 230 Motor Wired for 460V TS / ET3E284TS-W22 ESW-80V24A-R41 PESW80V24AX-R41 PESW40V47AX-R T / ET3E284T-W22 ESW-80V24A-R41 PESW80V24AX-R41 PESW40V47AX-R T / ET3E324T-W22 ESW-80V24A-R41 PESW80V24AX-R41 PESW40V47AX-R TS / ET3E286TS-W22 ESW-95V24A-R43 ESW-50V47A-R38 PESW95V24AX-R43 PESW50V47AX-R T / ET3E286T-W22 ESW-95V24A-R43 ESW-50V47A-R38 PESW95V24AX-R43 PESW50V47AX-R T / ET3E326T-W22 ESW-95V24A-R43 ESW-50V47A-R38 PESW95V24AX-R43 PESW50V47AX-R TS / ET3E324TS-W22 ESW-105V24A-R45 ESW-65V47A-R39 PESW105V24AX-R45 PESW65V47AX-R T / ET3E324T-W22 ESW-105V24A-R45 ESW-65V47A-R39 PESW105V24AX-R45 PESW65V47AX-R T / ET3E364T-W22 ESW-105V24A-R45 ESW-65V47A-R39 PESW105V24AX-R45 PESW65V47AX-R TS / ET3E326TS-W22 ESW-80V47A-R41 PESW80V47AX-R T / ET3E326T-W22 ESW-80V47A-R41 PESW80V47AX-R T / ET3E365T-W22 ESW-80V47A-R41 PESW80V47AX-R TS / ET3E364TS-W22 ESW-95V47A-R43 PESW95V47AX-R T / ET3E364T-W22 ESW-95V47A-R43 PESW95V47AX-R T / ET3E404T-W22 ESW-95V47A-R43 PESW95V47AX-R TS / ET3E365TS-W22 ESW-105V47A-R44 PESW105V47AX-R T / ET3E365T-W22 ESW-105V47A-R44 PESW105V47AX-R T / ET3E405T-W22 ESW-105V47A-R44 PESW105V47AX-R TS / ET3E405TS-W T / ET3E405T-W T / ET3E444T-W TS ET3G444TS-W T ET3G444T-W T ET3G445T-W TS ET3G445TS-W T ET3G445T-W T ET3G447T-W TS EP3G447TS-W T ET3G447T-W T ET3G447T-W TS EP3G447TS-W ET3G447TS-W T EP3G447T-W ET3G447T-W T EP3G449T-W ET3G449T-W TS EP3G449TS-W ET3G449TS-W T EP3G449T-W ET3G449T-W T EP3G449T-W ET3G449T-W22 ssw05 SSW07 Notes: - Motors above are foot mount. Also available with C-Flane (add C to end of P/N) and C-Flane Footless (contact WEG). - DOL Starters above include Start/Stop Pushbuttons and Reset. Also available with Reset Only (chane A to E in P/N) or with NEMA 1 Metallic Enclosure (remove P & X from P/N). - More Soft Starters and Variable Frequency Drives available. Also available: line reactors and DB resistors. Contact WEG for more information. For more information, contact your local distributor or your local WEG sales person at ASK-4-WEG. Data is subject to chane without notice. WEG Automation - Products and Solutions A-5

6 HP RPM Frame Voltae WEG W22 TEFC Severe Duty Motor WEG Rolled Steel Motor WEG Matched Automation Product Hih Efficiency Enclosure Ratin: IP55 Foot Mount NEMA Premium Efficiency Enclosure Ratin: IP55 Foot Mount Rolled Steel Hih Efficiency Enclosure Ratin: Foot Mount Rolled Steel NEMA Premium Combination Direct-on-line Starter (Fusible Disconnect) Combination Direct-on-line Starter (MCCB Disconnect) Combination Direct-on-line Starter (MPCB Disconnect) Enclosure Ratin: Enclosure Ratin: NEMA 4 / 12 Enclosure Ratin: NEMA 4 / 12 Enclosure Ratin: NEMA 4 / 12 Foot Mount Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V / ES3EB56 1/ / ES3EB / ES3EB56 ESWF-9V24NX-D06 1/ / ES3EB56 ESWF-9V24NX-D / ES3EB56 ESWF-9V24NX-D07 ESWF-9V47NX-D05 1/ / ES3EB56 ESWF-9V24NX-D07 ESWF-9V47NX-D / ES3EB56 ESWF-9V24NX-D07 ESWF-9V47NX-D / ES3EB56 ESWF-9V24NX-D08 ESWF-9V47NX-D06 3/ / ES3EB56 ESWF-9V24NX-D08 ESWF-9V47NX-D / ES3ED56 ESWF-9V24NX-D08 ESWF-9V47NX-D / ES3EB56 ESWF-9V24NX-D / ES3ED56 ESWF-9V24NX-D T / ET3E143T-W ET3ERS143T ESWF-9V24NX-D / ES3EF56 ESWF-9V24NX-D T / ET3E145T-W ET3ERS145T ESWF-9V24NX-D T / ET3E143T-W ET3ERS143T ESWF-9V24NX-D09 ESWF-9V47NX-D / ES3ED56 ESWF-9V24NX-D09 ESWF-9V47NX-D T / ET3E145T-W ET3ERS145T ESWF-9V24NX-D09 ESWF-9V47NX-D T / ET3E182T-W ET3ERS182T ESWF-9V24NX-D09 ESWF-9V47NX-D T / ET3E145T-W ET3ERS145T ESWF-9V47NX-D / ES3EF56 ESWF-9V47NX-D T / ET3E145T-W ET3ERS145T ESWF-9V47NX-D T / ET3E184T-W ET3ERS184T ESWF-9V47NX-D T / ET3E182T-W ET3ERS182T ESWA-9V24N4-R28 ESWA-9V47N4-R27 ESWC-9V24N4-R28 ESWC-9V47N4-R27 ESWF-9V24NX-D10 ESWF-9V47NX-D T / ET3E182T-W ET3ERS182T ESWA-9V24N4-R28 ESWA-9V47N4-R27 ESWC-9V24N4-R28 ESWC-9V47N4-R27 ESWF-9V24NX-D10 ESWF-9V47NX-D T / ET3E213T-W ET3ERS213T ESWA-9V24N4-R28 ESWA-9V47N4-R27 ESWC-9V24N4-R28 ESWC-9V47N4-R27 ESWF-9V24NX-D10 ESWF-9V47NX-D T / ET3E184T-W ET3ERS184T ESWA-18V24N4-R32 ESWA-9V47N4-R28 ESWC-18V24N4-R32 ESWC-9V47N4-R28 ESWF-18V24NX-D11 ESWF-9V47NX-D T / ET3E184T-W ET3ERS184T ESWA-18V24N4-R32 ESWA-9V47N4-R28 ESWC-18V24N4-R32 ESWC-9V47N4-R28 ESWF-18V24NX-D11 ESWF-9V47NX-D T / ET3E215T-W ET3ERS215T ESWA-18V24N4-R32 ESWA-9V47N4-R28 ESWC-18V24N4-R32 ESWC-9V47N4-R28 ESWF-18V24NX-D11 ESWF-9V47NX-D T / ET3E213T-W ET3ERS213T ESWA-25V24N4-R33 ESWA-12V47N4-R30 ESWC-25V24N4-R33 ESWC-12V47N4-R30 ESWF-25V24NX-D T / ET3E213T-W ET3ERS213T ESWA-25V24N4-R33 ESWA-12V47N4-R30 ESWC-25V24N4-R33 ESWC-12V47N4-R30 ESWF-25V24NX-D T / ET3E254T-W ET3ERS254T ESWA-25V24N4-R33 ESWA-12V47N4-R30 ESWC-25V24N4-R33 ESWC-12V47N4-R30 ESWF-25V24NX-D T / ET3E215T-W ET3ERS215T ESWA-32V24N4-R34 ESWA-18V47N4-R32 ESWC-32V24N4-R34 ESWC-18V47N4-R32 ESWF-40V24NX-D13 ESWF-18V47NX-D T / ET3E215T-W ET3ERS215T ESWA-32V24N4-R34 ESWA-18V47N4-R32 ESWC-32V24N4-R34 ESWC-18V47N4-R32 ESWF-40V24NX-D13 ESWF-18V47NX-D T / ET3E256T-W ET3ERS256T ESWA-32V24N4-R34 ESWA-18V47N4-R32 ESWC-32V24N4-R34 ESWC-18V47N4-R32 ESWF-40V24NX-D13 ESWF-18V47NX-D T / ET3E254T-W ET3ERS254T ESWA-50V24N4-R38 ESWA-25V47N4-R33 ESWC-50V24N4-R38 ESWC-25V47N4-R33 ESWF-65V24NX-D20 ESWF-25V47NX-D T / ET3E254T-W ET3ERS254T ESWA-50V24N4-R38 ESWA-25V47N4-R33 ESWC-50V24N4-R38 ESWC-25V47N4-R33 ESWF-65V24NX-D20 ESWF-25V47NX-D T / ET3E284T-W22 ESWA-50V24N4-R38 ESWA-25V47N4-R33 ESWC-50V24N4-R38 ESWC-25V47N4-R33 ESWF-65V24NX-D20 ESWF-25V47NX-D T / ET3E256T-W ET3ERS256T ESWA-65V24N4-R39 ESWA-32V47N4-R34 ESWC-65V24N4-R39 ESWC-32V47N4-R34 ESWF-80V24N4-D21 ESWF-40V47NX-D T / ET3E256T-W ET3ERS256T ESWA-65V24N4-R39 ESWA-32V47N4-R34 ESWC-65V24N4-R39 ESWC-32V47N4-R34 ESWF-80V24N4-D21 ESWF-40V47NX-D T / ET3E286T-W22 ESWA-65V24N4-R39 ESWA-32V47N4-R34 ESWC-65V24N4-R39 ESWC-32V47N4-R34 ESWF-80V24N4-D21 ESWF-40V47NX-D13 A ASK-4WEG Data is subject chane without notice.

7 HP RPM Frame Voltae WEG W22 TEFC Severe Duty Motor WEG Rolled Steel Motor WEG Matched Automation Product Rolled Rolled NEMA Premium Combination Direct-on-line Starter Combination Direct-on-line Starter Hih Efficiency Steel Hih Steel NEMA Efficiency (Fusible Disconnect) (MCCB Disconnect) Efficiency Premium Enclosure Enclosure Enclosure Ratin: IP55 Enclosure Ratin: IP55 Ratin: Ratin: Combination Direct-on-line Starter (MPCB Disconnect) Enclosure Ratin: NEMA 4 /12 Enclosure Ratin: NEMA 4 /12 Enclosure Ratin: NEMA 4 /12 Foot Mount Foot Mount Foot Mount Foot Mount Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V TS / ET3E284TS-W22 ESWA-80V24N4-R41 ESWA-40V47N4-R35 ESWC-80V24N4-R41 ESWC-40V47N4-R35 ESWF-95V24N4-D22 ESWF-50V47NX-D T / ET3E284T-W22 ESWA-80V24N4-R41 ESWA-40V47N4-R35 ESWC-80V24N4-R41 ESWC-40V47N4-R35 ESWF-95V24N4-D22 ESWF-50V47NX-D T / ET3E324T-W22 ESWA-80V24N4-R41 ESWA-40V47N4-R35 ESWC-80V24N4-R41 ESWC-40V47N4-R35 ESWF-95V24N4-D22 ESWF-50V47NX-D TS / ET3E286TS-W22 ESWA-80V24N4-R42 ESWA-50V47N4-R38 ESWC-80V24N4-R42 ESWC-50V47N4-R38 ESWF-95V24N4-D23 ESWF-65V47NX-D T / ET3E286T-W22 ESWA-80V24N4-R42 ESWA-50V47N4-R38 ESWC-80V24N4-R42 ESWC-50V47N4-R38 ESWF-95V24N4-D23 ESWF-65V47NX-D T / ET3E326T-W22 ESWA-80V24N4-R42 ESWA-50V47N4-R38 ESWC-80V24N4-R42 ESWC-50V47N4-R38 ESWF-95V24N4-D23 ESWF-65V47NX-D TS / ET3E324TS-W22 ESWA-105V24N4-R44 ESWA-65V47N4-R39 ESWC-105V24N4-R44 ESWC-65V47N4-R T / ET3E324T-W22 ESWA-105V24N4-R44 ESWA-65V47N4-R39 ESWC-105V24N4-R44 ESWC-65V47N4-R T / ET3E364T-W22 ESWA-105V24N4-R44 ESWA-65V47N4-R39 ESWC-105V24N4-R44 ESWC-65V47N4-R TS / ET3E326TS-W22 ESWA-150V24N4-R48 ESWA-80V47N4-R41 ESWC-150V24N4-R48 ESWC-80V47N4-R41 ESWF-80V47N4-D T / ET3E326T-W22 ESWA-150V24N4-R48 ESWA-80V47N4-R41 ESWC-150V24N4-R48 ESWC-80V47N4-R41 ESWF-80V47N4-D T / ET3E365T-W22 ESWA-150V24N4-R48 ESWA-80V47N4-R41 ESWC-150V24N4-R48 ESWC-80V47N4-R41 ESWF-80V47N4-D TS / ET3E364TS-W22 ESWA-150V24N4-R49 ESWA-80V47N4-R42 ESWC-150V24N4-R49 ESWC-80V47N4-R42 ESWF-95V47N4-D T / ET3E364T-W22 ESWA-150V24N4-R49 ESWA-80V47N4-R42 ESWC-150V24N4-R49 ESWC-80V47N4-R42 ESWF-95V47N4-D T / ET3E404T-W22 ESWA-150V24N4-R49 ESWA-80V47N4-R42 ESWC-150V24N4-R49 ESWC-80V47N4-R42 ESWF-95V47N4-D TS / ET3E365TS-W22 ESWA-180V24N4-R49 ESWA-105V47N4-R44 ESWC-180V24N4-R49 ESWC-105V47N4-R44 ESWF-105V47N4-D T / ET3E365T-W22 ESWA-180V24N4-R49 ESWA-105V47N4-R44 ESWC-180V24N4-R49 ESWC-105V47N4-R44 ESWF-105V47N4-D T / ET3E405T-W22 ESWA-180V24N4-R49 ESWA-105V47N4-R44 ESWC-180V24N4-R49 ESWC-105V47N4-R44 ESWF-105V47N4-D TS / ET3E405TS-W22 ESWA-250V24N4-R50 ESWA-150V47N4-R48 ESWC-250V24N4-R50 ESWC-150V47N4-R T / ET3E405T-W22 ESWA-250V24N4-R50 ESWA-150V47N4-R48 ESWC-250V24N4-R50 ESWC-150V47N4-R T / ET3E444T-W22 ESWA-250V24N4-R50 ESWA-150V47N4-R48 ESWC-250V24N4-R50 ESWC-150V47N4-R TS ET3G444TS-W22 ESWA-300V24N4-R51 ESWA-150V47N4-R49 ESWC-300V24N4-R51 ESWC-150V47N4-R T ET3G444T-W22 ESWA-300V24N4-R51 ESWA-150V47N4-R49 ESWC-300V24N4-R51 ESWC-150V47N4-R T ET3G445T-W22 ESWA-300V24N4-R51 ESWA-150V47N4-R49 ESWC-300V24N4-R51 ESWC-150V47N4-R TS ET3G445TS-W22 ESWA-180V47N4-R49 ESWC-180V47N4-R T ET3G445T-W22 ESWA-180V47N4-R49 ESWC-180V47N4-R T ET3G447T-W22 ESWA-180V47N4-R49 ESWC-180V47N4-R TS EP3G447TS-W22 ESWA-250V47N4-R50 ESWC-250V47N4-R T ET3G447T-W22 ESWA-250V47N4-R50 ESWC-250V47N4-R T ET3G447T-W22 ESWA-250V47N4-R50 ESWC-250V47N4-R TS EP3G447TS-W ET3G447TS-W22 ESWA-300V47N4-R51 ESWC-300V47N4-R T EP3G447T-W ET3G447T-W22 ESWA-300V47N4-R51 ESWC-300V47N4-R T EP3G449T-W ET3G449T-W22 ESWA-300V47N4-R51 ESWC-300V47N4-R TS EP3G449TS-W ET3G449TS-W T EP3G449T-W ET3G449T-W T EP3G449T-W ET3G449T-W22 Notes: - Motors above are foot mount. Also available with C-Flane (add C to end of P/N) and C-Flane Footless (contact WEG). - DOL Starters above include Start/Stop Pushbuttons and Reset. Also available with Reset Only (chane A to E in P/N) or with NEMA 1 Metallic Enclosure (remove P & X from P/N). - More Soft Starters and Variable Frequency Drives available. Also available: line reactors and DB resistors. Contact WEG for more information. For more information, contact your local distributor or your local WEG sales person at ASK-4-WEG. Data is subject to chane without notice. WEG Automation - Products and Solutions A-7

8 HP RPM Frame Voltae WEG W22 TEFC Severe Duty Motor Hih Efficiency Enclosure Ratin: IP55 NEMA Premium Efficiency Enclosure Ratin: IP55 WEG Rolled Steel Motor Rolled Steel Hih Efficiency Enclosure Ratin: Rolled Steel NEMA Premium Enclosure Ratin: Foot Mount Foot Mount Foot Mount Foot Mount Combination Direct-on-line Starter (Pump Controller) WEG Matched Automation Product Soft Starter Variable Frequency Drive Enclosure Ratin: NEMA 3R Enclosure Ratin: IP00 / IP20 Enclosure Ratin: NEMA 1 Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V / ES3EB56 CFW080016BDN1A1Z CFW080010TGN1A1Z 1/ / ES3EB56 CFW080016BDN1A1Z CFW080010TGN1A1Z / ES3EB56 CFW080016BDN1A1Z CFW080010TGN1A1Z 1/ / ES3EB56 CFW080016BDN1A1Z CFW080010TGN1A1Z / ES3EB56 CFW080026BDN1A1Z CFW080016TGN1A1Z 1/ / ES3EB56 CFW080026BDN1A1Z CFW080016TGN1A1Z / ES3EB56 CFW080026BDN1A1Z CFW080016TGN1A1Z / ES3EB56 CFW080040BDN1A1Z CFW080016TGN1A1Z 3/ / ES3EB56 CFW080040BDN1A1Z CFW080016TGN1A1Z / ES3ED56 CFW080040BDN1A1Z CFW080016TGN1A1Z / ES3EB56 CFW080040BDN1A1Z CFW080027TGN1A1Z / ES3ED56 CFW080040BDN1A1Z CFW080027TGN1A1Z T / ET3E143T-W ET3ERS143T CFW080040BDN1A1Z CFW080027TGN1A1Z / ES3EF56 CFW080040BDN1A1Z CFW080027TGN1A1Z T / ET3E145T-W ET3ERS145T CFW080040BDN1A1Z CFW080027TGN1A1Z T / ET3E143T-W ET3ERS143T ESWA-9T02N3-R27P SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z / ES3ED56 ESWA-9T02N3-R27P SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E145T-W ET3ERS145T ESWA-9T02N3-R27P SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E182T-W ET3ERS182T ESWA-9T02N3-R27P SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E145T-W ET3ERS145T SSW050010T2246EPZ SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z / ES3EF56 SSW050010T2246EPZ SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E145T-W ET3ERS145T SSW050010T2246EPZ SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E184T-W ET3ERS184T SSW050010T2246EPZ SSW050010T2246EPZ CFW080073BDN1A1Z CFW080043TGN1A1Z T / ET3E182T-W ET3ERS182T ESWA-9T02N3-R28P ESWA-9T04N3-R27P SSW050010T2246EPZ SSW050010T2246EPZ CFW080100BDN1A1Z CFW080065TGN1A1Z T / ET3E182T-W ET3ERS182T ESWA-9T02N3-R28P ESWA-9T04N3-R27P SSW050010T2246EPZ SSW050010T2246EPZ CFW080100BDN1A1Z CFW080065TGN1A1Z T / ET3E213T-W ET3ERS213T ESWA-9T02N3-R28P ESWA-9T04N3-R27P SSW050010T2246EPZ SSW050010T2246EPZ CFW080100BDN1A1Z CFW080065TGN1A1Z T / ET3E184T-W ET3ERS184T ESWA-18T02N3-R32P ESWA-9T04N3-R28P SSW050016T2246EPZ SSW050010T2246EPZ CFW080160TDN1A1Z CFW080100TGN1A1Z T / ET3E184T-W ET3ERS184T ESWA-18T02N3-R32P ESWA-9T04N3-R28P SSW050016T2246EPZ SSW050010T2246EPZ CFW080160TDN1A1Z CFW080100TGN1A1Z T / ET3E215T-W ET3ERS215T ESWA-18T02N3-R32P ESWA-9T04N3-R28P SSW050016T2246EPZ SSW050010T2246EPZ CFW080160TDN1A1Z CFW080100TGN1A1Z T / ET3E213T-W ET3ERS213T ESWA-25T02N3-R33P ESWA-12T04N3-R30P SSW050023T2246EPZ SSW050016T2246EPZ CFW080220TDN1A1Z CFW080130TGN1A1Z T / ET3E213T-W ET3ERS213T ESWA-25T02N3-R33P ESWA-12T04N3-R30P SSW050023T2246EPZ SSW050016T2246EPZ CFW080220TDN1A1Z CFW080130TGN1A1Z T / ET3E254T-W ET3ERS254T ESWA-25T02N3-R33P ESWA-12T04N3-R30P SSW050023T2246EPZ SSW050016T2246EPZ CFW080220TDN1A1Z CFW080130TGN1A1Z T / ET3E215T-W ET3ERS215T ESWA-32T02N3-R34P ESWA-18T04N3-R32P SSW050030T2246EPZ SSW050016T2246EPZ CFW080280TDN1A1Z CFW080160TGN1A1Z T / ET3E215T-W ET3ERS215T ESWA-32T02N3-R34P ESWA-18T04N3-R32P SSW050030T2246EPZ SSW050016T2246EPZ CFW080280TDN1A1Z CFW080160TGN1A1Z T / ET3E256T-W ET3ERS256T ESWA-32T02N3-R34P ESWA-18T04N3-R32P SSW050030T2246EPZ SSW050016T2246EPZ CFW080280TDN1A1Z CFW080160TGN1A1Z T / ET3E254T-W ET3ERS254T ESWA-50T02N3-R38P ESWA-25T04N3-R33P SSW050045T2246EPZ SSW050023T2246EPZ CFW110045T2ON1Z CFW080240TGN1A1Z T / ET3E254T-W ET3ERS254T ESWA-50T02N3-R38P ESWA-25T04N3-R33P SSW050045T2246EPZ SSW050023T2246EPZ CFW110045T2ON1Z CFW080240TGN1A1Z T / ET3E284T-W22 ESWA-50T02N3-R38P ESWA-25T04N3-R33P SSW050045T2246EPZ SSW050023T2246EPZ CFW110045T2ON1Z CFW080240TGN1A1Z T / ET3E256T-W ET3ERS256T ESWA-65T02N3-R39P ESWA-32T04N3-R34P SSW050060T2246EPZ SSW050030T2246EPZ CFW110054T2ON1Z CFW080300TGN1A1Z T / ET3E256T-W ET3ERS256T ESWA-65T02N3-R39P ESWA-32T04N3-R34P SSW050060T2246EPZ SSW050030T2246EPZ CFW110054T2ON1Z CFW080300TGN1A1Z T / ET3E286T-W22 ESWA-65T02N3-R39P ESWA-32T04N3-R34P SSW050060T2246EPZ SSW050030T2246EPZ CFW110054T2ON1Z CFW080300TGN1A1Z A ASK-4WEG Data is subject chane without notice.

9 HP RPM Frame Voltae WEG W22 TEFC Severe Duty Motor WEG Rolled Steel Motor WEG Matched Automation Product Hih Efficiency Enclosure Ratin: IP55 NEMA Premium Efficiency Enclosure Ratin: IP55 Rolled Steel Hih Efficiency Enclosure Ratin: Rolled Steel NEMA Premium Enclosure Ratin: Foot Mount Foot Mount Foot Mount Foot Mount Combination Direct-on-line Starter (Pump Controller) Soft Starter Variable Frequency Drive Enclosure Ratin: NEMA 3R Enclosure Ratin: IP00 / IP20 Enclosure Ratin: NEMA 1 Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V Motor Wired for 230 Motor Wired for 460V TS / ET3E284TS-W22 ESWA-80T02N3-R41P ESWA-40T04N3-R35P SSW050085T2246EPZ SSW050045T2246EPZ CFW110070T2ON1Z CFW110038T4ON1Z T / ET3E284T-W22 ESWA-80T02N3-R41P ESWA-40T04N3-R35P SSW050085T2246EPZ SSW050045T2246EPZ CFW110070T2ON1Z CFW TGZ T / ET3E324T-W22 ESWA-80T02N3-R41P ESWA-40T04N3-R35P SSW050085T2246EPZ SSW050045T2246EPZ CFW110070T2ON1Z CFW TGZ TS / ET3E286TS-W22 ESWA-80T02N3-R42P ESWA-50T04N3-R38P SSW050085T2246EPZ SSW050045T2246EPZ CFW110086T2ON1Z CFW110045T4ON1Z T / ET3E286T-W22 ESWA-80T02N3-R42P ESWA-50T04N3-R38P SSW050085T2246EPZ SSW050045T2246EPZ CFW110086T2ON1Z CFW110045T4ON1Z T / ET3E326T-W22 ESWA-80T02N3-R42P ESWA-50T04N3-R38P SSW050085T2246EPZ SSW050045T2246EPZ CFW110086T2ON1Z CFW110045T4ON1Z TS / ET3E324TS-W22 ESWA-105T02N3-R44P ESWA-65T04N3-R39P SSW060130T2257ESZ SSW050060T2246EPZ CFW110105T2ON1Z CFW110058T4ON1Z T / ET3E324T-W22 ESWA-105T02N3-R44P ESWA-65T04N3-R39P SSW060130T2257ESZ SSW050060T2246EPZ CFW110105T2ON1Z CFW110058T4ON1Z T / ET3E364T-W22 ESWA-105T02N3-R44P ESWA-65T04N3-R39P SSW060130T2257ESZ SSW050060T2246EPZ CFW110105T2ON1Z CFW110058T4ON1Z TS / ET3E326TS-W22 ESWA-80T04N3-R41P SSW060130T2257ESZ SSW050085T2246EPZ CFW110142T2ON1Z CFW110070T4ON1Z T / ET3E326T-W22 ESWA-80T04N3-R41P SSW060130T2257ESZ SSW050085T2246EPZ CFW110142T2ON1Z CFW110070T4ON1Z T / ET3E365T-W22 ESWA-80T04N3-R41P SSW060130T2257ESZ SSW050085T2246EPZ CFW110142T2ON1Z CFW110070T4ON1Z TS / ET3E364TS-W22 ESWA-150T02N3-R48P ESWA-80T04N3-R42P SSW060170T2257ESZ SSW060085T2257ESZ CFW110180T2ON1Z CFW110088T4ON1Z T / ET3E364T-W22 ESWA-150T02N3-R48P ESWA-80T04N3-R42P SSW060170T2257ESZ SSW060085T2257ESZ CFW110180T2ON1Z CFW110088T4ON1Z T / ET3E404T-W22 ESWA-150T02N3-R48P ESWA-80T04N3-R42P SSW060170T2257ESZ SSW060085T2257ESZ CFW110180T2ON1Z CFW110088T4ON1Z TS / ET3E365TS-W22 ESWA-180T02N3-R49P ESWA-105T04N3-R44P SSW060205T2257ESZ SSW060130T2257ESZ CFW110211T2ON1Z CFW110105T4ON1Z T / ET3E365T-W22 ESWA-180T02N3-R49P ESWA-105T04N3-R44P SSW060205T2257ESZ SSW060130T2257ESZ CFW110211T2ON1Z CFW110105T4ON1Z T / ET3E405T-W22 ESWA-180T02N3-R49P ESWA-105T04N3-R44P SSW060205T2257ESZ SSW060130T2257ESZ CFW110211T2ON1Z CFW110105T4ON1Z TS / ET3E405TS-W22 ESWA-250T02N3-R50P ESWA-150T04N3-R48P SSW060255T2257ESZ SSW060130T2257ESZ CFW110142T4ON1Z T / ET3E405T-W22 ESWA-250T02N3-R50P ESWA-150T04N3-R48P SSW060255T2257ESZ SSW060130T2257ESZ CFW110142T4ON1Z T / ET3E444T-W22 ESWA-250T02N3-R50P ESWA-150T04N3-R48P SSW060255T2257ESZ SSW060130T2257ESZ CFW110142T4ON1Z TS ET3G444TS-W22 ESWA-300T02N3-R51P ESWA-150T04N3-R49P SSW060312T2257ESZ SSW060170T2257ESZ CFW110180T4ON1Z T ET3G444T-W22 ESWA-300T02N3-R51P ESWA-150T04N3-R49P SSW060312T2257ESZ SSW060170T2257ESZ CFW110180T4ON1Z T ET3G445T-W22 ESWA-300T02N3-R51P ESWA-150T04N3-R49P SSW060312T2257ESZ SSW060170T2257ESZ CFW110180T4ON1Z TS ET3G445TS-W22 ESWA-180T04N3-R49P SSW060365T2257ESZ SSW060205T2257ESZ CFW110211T4ON1Z T ET3G445T-W22 ESWA-180T04N3-R49P SSW060365T2257ESZ SSW060205T2257ESZ CFW110211T4ON1Z T ET3G447T-W22 ESWA-180T04N3-R49P SSW060365T2257ESZ SSW060205T2257ESZ CFW110211T4ON1Z TS EP3G447TS-W22 ESWA-250T04N3-R50P SSW060255T2257ESZ CFW110242T4SZ T ET3G447T-W22 ESWA-250T04N3-R50P SSW060255T2257ESZ CFW110242T4SZ T ET3G447T-W22 ESWA-250T04N3-R50P SSW060255T2257ESZ CFW110242T4SZ TS EP3G447TS-W ET3G447TS-W22 ESWA-300T04N3-R51P SSW060312T2257ESZ CFW110312T4SZ T EP3G447T-W ET3G447T-W22 ESWA-300T04N3-R51P SSW060312T2257ESZ CFW110312T4SZ T EP3G449T-W ET3G449T-W22 ESWA-300T04N3-R51P SSW060312T2257ESZ CFW110312T4SZ TS EP3G449TS-W ET3G449TS-W22 SSW060365T2257ESZ CFW110370T4SZ T EP3G449T-W ET3G449T-W22 SSW060365T2257ESZ CFW110370T4SZ T EP3G449T-W ET3G449T-W22 SSW060365T2257ESZ CFW110370T4SZ Notes: - Motors above are foot mount. Also available with C-Flane (add C to end of P/N) and C-Flane Footless (contact WEG). - DOL Starters above include Start/Stop Pushbuttons and Reset. Also available with Reset Only (chane A to E in P/N) or with NEMA 1 Metallic Enclosure (remove P & X from P/N). - More Soft Starters and Variable Frequency Drives available. Also available: line reactors and DB resistors. Contact WEG for more information. For more information, contact your local distributor or your local WEG sales person at ASK-4-WEG. Data is subject to chane without notice. WEG Automation - Products and Solutions A-9

10 Table of Contents Index Low Voltae Variable Frequency Drives CFW10 CFW10 1/4-3HP Product Overview... A-16 Product Selection... A-20 IP20 Finer-Safe Enclosure... A-18 IP20 Finer-Safe Potentiometer... A-18 Technical Data... A-19 CFW08 CFW08 Plus - NEMA 1 and NEMA 4X Washdown 1/4 20HP Product Overview... A-20 Product Selection & Accessories... A-22 NEMA 4 Enclosure... A-23 Dynamic Brakin Resistors & Technical Data... A-26 CFW09 CFW HP Product Overview... A-26 Drive Features... A-28 Keypad Features... A-29 Product Selection 230V & 460V... A-30 Product Selection 575V... A-31 Options & Accessories... A-32 Dynamic Brakin Resistors 10% Duty Cycle... A-35 Dynamic Brakin Resistors 20% Duty Cycle... A-36 Line and Load Reactors... A-37 Technical Data... A-38 CFW700 CFW11 CFW HP Product Overview... A-40 Product Selection... A-43 Accessories... A-44 CFW HP Product Overview... A-47 Technical Features... A-49 Drive Ratins... A-50 Product Selection... A-53 Options and Accessories... A-54 Accessories... A-55 USB Connection... A-56 Dynamic Brakin Resistors 20% Duty Cycle... A-57 Dynamic Brakin Resistors 50% Duty Cycle... A-58 Technical Data... A-59 Communication Options and Superdrive... A-60 Disclaimer: WEG Electric Corp. has made every effort in order to include updated and accurate information in this catao. All information is subject to updates, chanes or corrections at anytime without prior notice. A ASK-4WEG Data is subject chane without notice.

11 Table of Contents Index Low Voltae Variable Frequency Drive Panels Enclosed Drive Panel EDP P Product Overview... A-61 Product Selection & Accessories...A-62 Options...A-63 Dimensions...A-64 CFW11M HP Product Overview... A-66 Product Selection... A-67 Dimensions...A-68 CFW11M EDP11 Data is subject to chane without notice. CALL NOW WEG Automation - Products and Solutions A-11

12 Table of Contents Index Low Voltae Soft Starters ssw05 SSW HP General Purpose Liht Product Overview... A-69 Product Selection - Protected Chassis Enclosure and Accessories...A-71 Technical Data... A-72 SSW07 SSW HP Heavy Duty Product Overview... A-73 Product Selection - IP20 and IP00 & Accessories...A-75 Startin Method Comparison, Typical Starter Applications and Indications... A-77 Prorammin Features and dimensions... A-78 Accessories and Options...A-79 Technical Specifications... A-81 ssw06 SSW HP Heavy Duty Full Automation Capability Product Overview... A-83 Product Selection IP00 Protected Chassis Enclosure... A-85 Accessories... A-86 Technical Data... A-87 Low Voltae Soft Starter Panels ph2 GPH2 - Combination Soft Starter HP Product Overview... A-89 Product Selection NEMA 4/12 Enclosure... A-91 Dimensions... A-93 TPH2 TPH HP Product Overview... A-94 Product Selection NEMA4 1/2 Enclosure... A-96 A ASK-4WEG Data is subject chane without notice.

13 Table of Contents Index Medium Voltae Drives and Soft Starters MVW01 - Medium Voltae Drive ,000HP Product Overview... A-98 MVW01 - Medium Voltae Drive... A-100 Technical Data... A-102 MVW-01C Product Selection... A-104 MVW01 SSW7000 Soft Starters HP Product Overview... A-109 Functions...A-113 Accessories...A-116 Dimensions...A-117 Technical Data...A-118 SSW7000 Data is subject to chane without notice. WEG Automation - Products and Solutions A-13

14 CONTACTORS RW SERIES SRW01 SERIES ACW SERIES MPW SERIES Enclosed starters pushbuttons TIMING RELAYS TERMINAL BLOCKS Power Factor Table of Contents Index Industrial Controls Miniature Contactors CWC Series Features... B-12 Product Selection... B-17 Technical Data... B-24 Dimensions... B-28 IEC Contactors CWM Series Features... B-29 Product Selection... B-35 Technical Data... B-45 Dimensions... B-57 NEMA Rated Contactors CWM-N Series Features... B-39 Product Selection... B-41 Technical Data... B-45 Dimensions... B-57 Overload Relays RW Series Features... B-68 Product Selection... B-70 Technical Data... B-72 Dimension... B-76 Smart Relays SRW Series Features... B-85 Product Selection... B-92 Technical Data... B-96 Dimensions... B-97 Molded Case Circuit Breakers - ACW Series Molded Case Circuit Breakers ACW Series... B-105 Features Trip Units... B-106 Product Selection... B-108 Technical Data... B-116 Trip Curves... B-123 Dimensions... B-136 Manual Motor Protectors MPW Series Features... B-147 Product Selection... B-154 Technical Data... B-173 Dimensions... B-196 A ASK-4WEG Data is subject chane without notice.

15 Table of Contents Index Industrial Controls Enclosed Starters Features... B-203 Non-Combination Starters Product Selection... B-208 Combination Starters Product Selection... B-209 Dimensions... B-248 Pushbuttons and Pilot Lihts CSW Series Features... B-254 CSW Series (22mm) Product Selection... B-258 CSW Series (22mm) Dimension... B-265 CSW30 Series (30mm Industrial) Product Selection... B-267 CSW30 Series (30mm Industrial) Dimension... B-274 CSW30H Series (30mm Hazardous) Product Selection... B-279 CSW30H Series (30mm Hazardous) Dimension... B-284 Pushbutton Stations Product Selection... B-290 Timin Relays RTW Series Protection Relays RPW Series Level Relays RNW Series Features... B-291 Product Selection... B-293 RTW Technical Data... B-299 RPW Technical Data... B-305 RNW Technical Data... B-310 Terminal Blocks BTW Series Features... B-312 BTWP Series Product Selection... B-317 BTWM Series Product Selection... B-324 Power Factor Correction Suested Maximum Capacitor Ratin for T-Frame NEMA Motors... B-335 Overview Concepts... B-341 Sizin... B-344 Product Selection - Sinle & Three Phase Capacitor Elements... B-356 Enclosed Three Phase Capacitors... B-363 Contactors for Capacitive Switchin... B-368 Power Factor TIMING RELAYS pushbuttons Enclosed starters MPW SERIES ACW SERIES SRW01 SERIES RW SERIES CONTACTORS TERMINAL BLOCKS Data is subject to chane without notice. WEG Automation - Products and Solutions A-15

16 CFW10 CFW10 Variable Frequency Drives CFW08 The new WEG Diital CFW10 VFD Series is an offsprin of the very successful CFW08 Plus. In addition to a very small, easily mounted packae, simplified keypad and briht LED readout, complete dianostics and fully prorammable I/O, the CFW10 controls three phase AC motors with a sinle phase AC input. Sinle phase 120V AC input voltae will produce three phase 230V to drive motors up to 1 HP and sinle phase 230V AC will produce three phase 230V to drive motors up to 3 HP. Increased flexibility and decreased costs are achieved by eliminatin the need for a step-up transformer to operate three phase 230V AC motors when only sinle phase 115V is available. The CFW10 is an economical solution to many industrial and commercial applications. CFW09 CFW700 CFW11 Applications Pumps Fans/Blowers Blowers Conveyors Rollout tables Standard Features Same prorammin as all other WEG VFD's V/Hz control IP20 finer safe enclosure Sinle Phase V input voltae up to 1 HP Sinle Phase V input voltae up to 3 HP 150% current overload capacity khz adjustable switchin frequency Four isolated prorammable diital inputs (12vdc) Prorammable relay output (250vac 0.5A/125vac 1.0A or 30vdc 2.0A) One isolated prorammable analo input (0-10V 0/4-20mA) Dianostic features: Over current, motor overload, drive over temperature, output short circuit, DC bus over and under voltae and external fault Control features: Linear and S-Ramp acceleration and deceleration, local / remote control, DC brakin, torque boost, motor slip compensation, electronic pot, preset speeds, minimum and maximum adjustable frequency limits, adjustable output current limit, JOG Display readins: Motor speed, frequency, voltae, current, last fault, heatsink temperature and drive status Ambient: 122 F (50 C), 3300 ft (1000 m) altitude, 90% humidity, non-condensin A ASK-4WEG Data is subject chane without notice.

17 CFW10 Variable Frequency Drives 0.25 to 3 HP 1 CFW Codin 3 S 4 A 5 6 Z CFW10 1. CFW10 series 2. Rated Current 0040 = 4 Amps 0100 = 10 Amps 3. Number of Phase: S = Sinle phase input 4. Input Voltae: A = VAC (+10% -15%) D = VAC (+10% - 15%) 5. Options: Blank = Standard PL = Plus Potentiometer 6. End of code Z Main differences for the CFW10 models: Standard Plus HMI (3 LEDs) Yes Yes HMI (3LEDs) + Pot No Yes Isolated Analo Input 1 1 Diital Inptuts 4 4 Data is subject to chane without notice. WEG Automation - Products and Solutions A-17

18 CFW10 Variable Frequency Drives CFW10 IP20 Finer-Safe Enclosure CFW08 Motor Volts 230V Three Phase Drive Motor HP Catalo Number AMPS INPUT POWER SUPPLY: SINGLE - PHASE 120V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol 1/4 1.6 CFW100016SAZ x 3.8 x $359 V1 1/2 2.6 CFW100026SAZ x 3.8 x $386 V CFW100040SAZ x 4.6 x $584 V1 INPUT POWER SUPPLY: SINGLE - PHASE 230V 1/4 1.6 CFW100016SDZ x 3.8 x $312 V1 1/2 2.6 CFW100026SDZ x 3.8 x $336 V CFW100040SDZ x 3.8 x $359 V CFW100073SDZ x 4.6 x $531 V CFW100100SDZ x 4.6 x $632 V1 Notes 1) HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) For other technical data please refer to WEG product manual. CFW09 IP20 Finer-Safe Enclosure With Potentiometer CFW700 CFW11 Motor Volts 230V Three Phase Drive Motor HP Catalo Number AMPS INPUT POWER SUPPLY: SINGLE - PHASE 120V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol 1/4 1.6 CFW100016SAPLZ x 3.8 x $378 V1 1/2 2.6 CFW100026SAPLZ x 3.8 x $405 V CFW100040SAPLZ x 4.6 x $614 V1 INPUT POWER SUPPLY: SINGLE - PHASE 230V 1/4 1.6 CFW100016SDPLZ x 3.8 x $328 V1 1/2 2.6 CFW100026SDPLZ x 3.8 x $352 V CFW100040SDPLZ x 3.8 x $376 V CFW100073SDPLZ x 4.6 x $557 V CFW100100SDPLZ x 4.6 x $663 V1 Notes: 1) HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) For other technical data please refer to WEG product manual. A ASK-4WEG Data is subject chane without notice.

19 Technical Data Power Supply Voltae Sinle phase V (+10%, -15%) Frequency Sinle phase V (+10%, -15%) 50 / 60Hz +/- 2Hz Cos (Displacement Power Factor) Greater than 0.98 Enclosure Deree of Protection IP20 Control Mode Control Power Output 16 bit DSP Linear or Quadratic V/Hz Sinusoidal PWM (Space Vector Modulation) Switchin Frequency IGBT Transistors 2.5, 5, 10 or 15kHz Frequency Rane kHz Switchin Frequency Overload Capacity Hz Control Inputs 4 prorammable isolated diital inputs 150% durin 60 sec. every 10 min. 1 prorammable differential analo input: 0-10V, 0-20mA or 4-20mA Control Ouput 1 prorammable realy outputs, one reversin (Form C) contact: 250V / 0.5A Safety Protections Motor over current DC link over voltae Motor overload DC link under voltae output phase-to-phase short Drive over temperature circuit output phase-to-round short external fault circuit prorammin error Ambient Temperature 0 104F (40ºC), up to 122ºF (50ºC) without output current deratin Humidity 5 90% Non Condensin Altitude ft (1000m), up to 13,200 ft (4000m) with 10% / 3300ft (1000m) output current deratin Conformities EMC Directive 89 / 336 / EEC Electromanetic compatibility Industrial Environment EMC Emission and Immunity ENC for the FA version - optional LVD 73/23/EEC Low Voltae Directive UL 508 C Power Conversion Equipment Special Functions Linear and S ramp accel and decel, local/remote control, FWD/REV selection, DC brakin, manual and auto torque boost, motor slip compensation, electronic pot, two skip frequencies, maximum and minimum adjustable frequency limits, adjustable output current limit, 8 present speeds and JOG. Keypad 3 diit display, 2 indication LEDs and 4 keys Readouts for: output freqency (Hz), output current (A), output voltae (V), value proportional to frequency (Ex: RPM), heatsink temperature, fault and status messaes. Mountin Surface with screws CFW10 Data is subject to chane without notice. WEG Automation - Products and Solutions A-19

20 CFW08 Plus Variable Frequency Drives The WEG CFW08 Plus Series is a redesin of our successful μline VFDs. Enineerin improvements have produced one of the most compact and full featured microdrives in the marketplace. CFW08 Outstandin features and options in a NEMA 1 enclosure allow the CFW08 Plus to be successfully used in a lare variety of applications. Applications NEMA 1 Pumps Fans Blowers Conveyors Rollout tables Aitators Mixers NEMA 4X A1 Any washdown applications Standard Features Same prorammin as all other WEG VFD's V/Hz and Sensorless Vector Control NEMA 1 Enclosure or NEMA 4X(IP56) Sinle and Three-phase input voltae V or V input voltae 150% current overload capacity 16 bit DSP controlled PWM output 2.5 / 5 / 10 / 15 khz adjustable swichin frequency Four isolated prorammable diital inputs Two prorammable relay outputs (1NO, 1NC, 240vac 0.5A) Two isolated prorammable analo inputs (0-10V, 0/4-20mA) Protective features: Over current, motor overload, drive over temperature, output phase-to-phase and phase-to-round short circuit, DC bus over and under voltae and external fault Control features: Linear and "S" ramp acceleration and deceleration, local/remote control, DC brakin, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable frequency limits, two skip frequencies, adjustable output current limit, JOG, ride-thru, flyin start and PID reulator. Display readins: Motor speed, frequency, voltae, current, last fault, heatsink temperature and drive status Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300ft (1000m) altitude, 90% humidity, non-condensin SuperDrive (G1) compatible Optional Features Dynamic Brakin Resistors available Remote Keypad with Copy Function RS-232 or RS-485 Serial Interface Modbus Communication* DIN rail mountin throuh 2HP *Requires optional RS- 232 or RS-485 Interface A ASK-4WEG Data is subject chane without notice.

21 CFW08 Plus Variable Frequency Drives 0.25 to 20 HP 1 CFW Codin 3 B 4 D 5 N1 6 A1 7 Z CFW08 1. CFW08 series 2. Rated Current 0040 = 4 Amps 0016 = 1.6 Amps 0160 = 16 Amps 3. Number of Phase: B = Sinle phase or Three phase T = Three Phase 4. Input Voltae: D = VAC G = VAC 5. Enclosure N1 = NEMA1 N4 = NEMA 4X 6. Enclosure A1 = Plus version 7. End of Code Z Data is subject to chane without notice. WEG Automation - Products and Solutions A-21

22 CFW10 Variable Frequency Drives CFW08 Plus CFW08 Plus NEMA 1 Enclosure Motor Volts Motor HP Drive AMPS Catalo Number Brakin Transistor Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol CFW08 CFW09 CFW700 CFW11 230V 460V 575V INPUT POWER SUPPLY: SINGLE OR THREE-PHASE - 230V 1/4 or 1/3 1.6 CFW080016BDN1A1Z NO x 3 x $439 V1 1/2 2.6 CFW080026BDN1A1Z NO x 3 x $462 V1 1 4 CFW080040BDN1A1Z NO x 3 x $505 V CFW080073BDN1A1Z YES x 4.5 x $743 V CFW080100BDN1A1Z YES x 4.5 x $831 V1 INPUT POWER SUPPLY: THREE PHASE - 230V 1/4 or 1/3 1.6 CFW080016BDN1A1Z NO x 3 x $439 V1 1/2 2.6 CFW080026BDN1A1Z NO x 3 x $462 V1 1 4 CFW080040BDN1A1Z NO x 3 x $505 V1 2 7 CFW080070TDN1A1Z NO x 3 x $643 V CFW080073BDN1A1Z YES x 4.5 x $743 V CFW080100BDN1A1Z YES x 4.5 x $831 V CFW080160TDN1A1Z YES x 4.5 x $982 V CFW080220TDN1A1Z YES 3 8 x 5.6 x $1,415 V CFW080280TDN1A1Z YES x 7.2 x $1,813 V1 INPUT POWER SUPPLY: THREE PHASE - 460V 1/4 or 1/3 1 CFW080010TGN1A1Z NO x 3 x $578 V1 3/4 1.6 CFW080016TGN1A1Z NO x 3 x $609 V CFW080026TGN1A1Z NO x 3 x $645 V CFW080027TGN1A1Z YES x 4.5 x $715 V1 2 4 CFW080040TGN1A1Z NO x 3 x $777 V CFW080043TGN1A1Z YES x 4.5 x $894 V CFW080065TGN1A1Z YES x 4.5 x $1,065 V CFW080100TGN1A1Z YES x 4.5 x $1,213 V CFW080130TGN1A1Z YES 3 8 x 5.6 x $1,485 V CFW080160TGN1A1Z YES 3 8 x 5.6 x $1,715 V CFW080240TGN1A1Z YES x 7.2 x $2,301 V CFW080300TGN1A1Z YES x 7.2 x $2,779 V1 INPUT POWER SUPPLY: THREE PHASE - 575V CFW080017THN1A1Z YES x 5.6 x $933 V1 2 3 CFW080030THN1A1Z YES x 5.6 x $961 V CFW080043THN1A1Z YES x 5.6 x $1,100 V1 5 7 CFW080070THN1A1Z YES x 5.6 x $1,310 V CFW080100THN1A1Z YES x 5.6 x $1,704 V CFW080120THN1A1Z YES x 5.6 x $1,837 V1 Notes: 1) HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) For other technical data please refer to WEG product manual. 3) All 575V drives are non-stocked items, consult WEG for availability. A ASK-4WEG Data is subject chane without notice.

23 Variable Frequency Drives CFW08 Wash Down CFW08 NEMA 4X Enclosure Motor Volts 230V 460V 575V Motor HP Drive AMPS Catalo Number Brakin Transistor INPUT POWER SUPPLY: SINGLE OR THREE-PHASE - 230V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price CFW080073BDN4A1Z YES A 10.4 X 6.5 X $929 V CFW080100BDN4A1Z YES A 10.4 X 6.5 X $1,039 V1 INPUT POWER SUPPLY: THREE PHASE - 230V 5 16 CFW080160TDN4A1Z YES A 10.4 X 6.5 X $1,228 V CFW080220TDN4A1Z YES B 13.4 X 8.5 X $1,769 V CFW080280TDN4A1Z YES B 13.4 X 8.5 X $2,266 V1 INPUT POWER SUPPLY: THREE PHASE - 460V CFW080027TGN4A1Z YES A 10.4 X 6.5 X $894 V CFW080043TGN4A1Z YES A 10.4 X 6.5 X $1,118 V CFW080065TGN4A1Z YES A 10.4 X 6.5 X $1,331 V CFW080100TGN4A1Z YES A 10.4 X 6.5 X $1,516 V CFW080130TGN4A1Z YES B 13.4 X 8.5 X $1,856 V CFW080160TGN4A1Z YES B 13.4 X 8.5 X $2,144 V CFW080240TGN4A1Z YES B 13.4 X 8.5 X $2,876 V CFW080300TGN4A1Z YES B 13.4 X 8.5 X $3,474 V1 INPUT POWER SUPPLY: THREE PHASE - 575V CFW080017THN4A1Z YES B 13.4 X 8.5 X $1,259 V1 2 3 CFW080030THN4A1Z YES B 13.4 X 8.5 X $1,421 V CFW080043THN4A1Z YES B 13.4 X 8.5 X $1,485 V1 5 7 CFW080070THN4A1Z YES B 13.4 X 8.5 X $1,767 V CFW080100THN4A1Z YES B 13.4 X 8.5 X $2,077 V CFW080120THN4A1Z YES B 13.4 X 8.5 X $2,388 V1 Notes: 1) HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) For other technical data please refer to WEG product manual. 3) All 575V drives are non-stocked items, consult WEG for availability. Multiplier Symbol CFW08 Data is subject to chane without notice. WEG Automation - Products and Solutions A-23

24 Variable Frequency Drives CFW08 CFW08 Accessories CFW10 CFW08 CFW09 Description Catalo Number List Price Multiplier Symbol NEMA12 Remote Keypad (requires MIS-CFW08-RS & cable) HMI-CFW08-RS $135 V1 Remote Keypad Interface MIS-CFW08-RS $64 V1 Keypad Cover TCL-CFW08 $13 V1 3.3 ft Remote Keypad Cable CAB-RS-1 $23 V1 6.6 ft Remote Keypad Cable CAB-RS-2 $31 V1 10 ft Remote Keypad Cable CAB-RS-3 $41 V1 16 ft Remote Keypad Cable CAB-RS-5 $51 V1 25 ft Remote Keypad Cable CAB-RS-7.5 $62 V1 33 ft Remote Keypad Cable CAB-RS-10 $72 V1 RS-232 Serial Comm. Module (mounted in place of keypad) KCS-CFW08 $97 V1 RS-232/485 Converter (mounted externally) MIW-02 $221 V1 PC Communication Kit KSD-CFW08 $124 V1 Interface for RS-485 Communication KRS-485-CFW08 $186 V1 Easy Mountin Kit - Size 1 KFIX-CFW08-M1 $18 V1 Easy Mountin Kit - Size 2 KFIX-CFW08-M2 $18 V1 NEMA 1 Kit - IP20 - Size 1 KN1-CFW08-M1 $28 V1 NEMA 1 Kit - IP20 - Size 2 KN1-CFW08-M2 $38 V1 DIN Rail Mountin Base - Size 1 KMD-CFW08-M1 $10 V1 120VAC Diital Input Adaptor Board (4 inputs) KAC-120-CFW08 $145 V1 24VDC power supply with standard CFW08 HMI interated KDC-24V-CFW08 $177 V1 24VDC power supply with interface for remote keypad KDC-24VR-CFW08 $211 V1 Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends CSW-SP3PBS $460 Z5 (22mm) replaces CFW-REM Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends CSW30-SP3PBS $535 Z5 (30mm) replaces CFW-REM Keypads Keypad Cables Options Remote Stations CFW700 CFW08 Plus - DB Resistors 10% Duty Cycle CFW11 230V 460V Motor Volts Motor HP For Use with CFW08 Plus Model Number: Catalo Number OHMS WATTS List Price Multiplier Symbol 2 CFW080073BDN1A1Z CFDB $183 V1 3 CFW080100BDN1A1Z CFDB $183 V1 5 CFW080160TDN1A1Z CFDB $183 V1 7.5 CFW080220TDN1A1Z CFDB $319 V1 10 CFW080280TDN1A1Z CFDB $319 V1 1 CFW080027TGN1A1Z CFDB $183 V1 2 CFW080043TGN1A1Z CFDB $183 V1 3 CFW080065TGN1A1Z CFDB $183 V1 5 CFW080100TGN1A1Z CFDB $319 V1 7.5 CFW080130TGN1A1Z CFDB $319 V1 10 CFW080160TGN1A1Z CFDB $319 V1 15 CFW080240TGN1A1Z CFDB $481 V1 20 CFW080300TGN1A1Z CFDB $638 V1 Note: These are non-stocked items, consult WEG for availability. A ASK-4WEG Data is subject chane without notice.

25 Variable Frequency Drives CFW08 Technical Data Power Supply Voltae Sinle or Three Phase V (+10%, -15%) Three Phase V (+10%, -15%) Frequency 50 / 60Hz +/- 2Hz Cos (Displacement Power Factor) Greater than 0.98 Enclosure Deree of Protection NEMA1 Control Control Modes V/Hz Sensorless Voltae Vector Processor 16 bit DSP Power Output Sinusoidal PWM (Space Vector Modulation) IGBT Transistors 2.5, 5, 10 or 15kHz Switchin Frequency 2.5, 5, 10 or 15kHz Switchin Frequency Frequency Rane 0-300Hz Overload Capacity 150% durin 60 sec. every 10 min. Control Inputs 4 prorammable isolated diital inputs, NPN or 24Vdc loic (PNP) 2 x prorammable differential analo inputs, prorammable for current or voltae with 0.25% linearity error and can be set as DI or as PTC input (0-10V or 0/4-20mA) Control Outputs 2 prorammable relay outputs, one NO (Form A) and on NC (Form B): 240 V / 0.5 A 1 x outputs with independent NO and NC at a same common 1 x output, prorammable for voltae (0-10V) or current (0-20 ma or 4-20 ma) and with 0.25% linearity error Communication Serial Optional RS-232 serial interface, RS-485 with external RS-232/485 converter Field Bus Modbus RTU with external RS-232/485 converter Safety Protections Motor over current DC Link over voltae Motor overload DC Link under voltae Output phase-to-phase short circuit Drive over temperature Output phase-to-round short circuit External fault Prorammin Error Ambient Temperature 0 104ºF (40ºC), up to 122ºF (50ºC) with 2% / 1.8ºF (1ºC) output current deratin Humidity 5 90% Non Condensin Altitude ft (1000m), up to 13,200 ft (4000m) with 10% / 3300 ft (1000m) output current deratin Certifications EMC Directive 89 / 336 / EEC Electromanetic compatibility Industrial Environment EMC Emission and Immunity ENC with optional filter LVD 73/23/EEC Low Voltae Directive UL 508 C Power Conversion Equipment Special Functions Linear and S ramp accel and decel, local/remote control, FWD/REV selection, DC brakin, manual and auto torque boost, motor slip compensation, electronic pot, two skip frequencies, maximum and minimum adjustable frequency limits, adjustable output current Keypad 4 diit display, 2 indicator LEDs and 8 keys Readouts for: output frequency (Hz), output current (A), output voltae (V), motor torque (%) in vector mode, DC bus voltae (V), value proportional to frequency (Ex.: RPM), heatsink temperature, fault and status messaes Mountin Screws or optional DIN rail mount CFW08 Data is subject to chane without notice. WEG Automation - Products and Solutions A-25

26 CFW09 Vectrue Inverter Variable Frequency Drives The WEG CFW09 Series of Variable Frequency Drives incorporates the world s most advanced technoloy in drives for three-phase AC induction motors. The Vectrue Technoloy represents a sinificant advancement, allowin this new eneration of WEG VFD s to combine V / F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques all in one product. WEG innovated and simplified brakin torque for special applications. Optimal Brakin eliminates the need for the dynamic brakin resistor in some applications allowin a simpler, more compact and economic solution. CFW09 Applications Pumps Fans / Blowers Conveyors Compressors Aitators and Mixers Extruders Grizzly Feeders Centrifues Cranes and Hoists Rollout Tables Presses Saws Standard Features Same prorammin as all other WEG VFD's V/Hz or Sensorless Vector Control via parameter selection Self Tunin to motor parameters NEMA 1 Enclosure up to 200HP IP20 Finer Safe Enclosure from 250 to 500HP V or V input voltae Sinle or Three-phase input voltae up to 3HP/230V 150% current overload capacity DC bus connections accessible Detachable Smart Keypad with dual display and Copy Function 32 bit RISC microprocessor controlled PWM output 1.25 / 2.5 / 5 / 10 khz adjustable switchin frequency Six isolated prorammable diital inputs Three prorammable relay outputs (250Vac / 1A) Two non isolated prorammable analo inputs Two non isolated prorammable analo outputs Protective features: Over current, motor overload, drive over temperature, output phase-to-phase and phase-to-round short circuit, DC bus over and under voltae, power supply under voltae and phase loss and external fault Control features: Linear and S amp acceleration and deceleration, local/remote control, DC brakin, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable motor speed limits, three skip frequencies, adjustable output current limit, JOG, ride-thru, flyin start and PID reulator Optional Features Closed loop vector control Remote keypad with cable and mountin frame RS-232 or RS-485 Serial Interface On/Off line PC prorammin with Superdrive Fieldbus Comm: Profibus DP, DeviceNet or Modbus RTU* Encoder buffered output Additional diital and analo I/O Dynamic Brakin Resistors available for most models *Requires optional RS-232 or RS- 485 Interface Display readins: Motor speed, frequency, voltae, current and torque, output power (kw), last four faults, drive status, diital and analo I/O status, hours powered and hours runnin Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300 ft (1000m) altitude, 90% humidity, non- condensin. SuperDrive (G1) compatible A ASK-4WEG Data is subject chane without notice.

27 CFW09 Variable Frequency Drives 1.5 to 500 HP 1. CFW T 4 G 5 6 Z 1. CFW09 series CFW09 2. Rated Current: 0006 = 6 Amps 0024 = 24 Amps 0240 = 240 Amps 0600 = 600 Amps 3. Number of Phase: T = Three Phase 4. Input Voltae D = VAC G = VAC H = VAC 5. Options: Blank = No additional accessories DB = Factory Added brakin chopper 6. End of code: Z Data is subject to chane without notice. WEG Automation - Products and Solutions A-27

28 Variable Frequency Drives CFW09 Vectrue Inverter CFW09 Vectrue Inverter A complete, flexible and compact product NEMA 1 / IP20 Enclosure Optional RS-232 Interface Module for PC Communication Flane for Throuh Surface Mountin 7 Sement LED Display Detachable Keypad with Multi-lanuae Double Display (LCD + LED) and Copy Function CFW09 2 Lines with 16 Characters LCD Display Hih Performance 32 bit RISC Microprocessor Optional Fieldbus Communication Modules for: - Profibus DP - DeviceNet - Modbus RTU Standard SMD Control Board for all Models 6 Prorammable Isolated Diital Inputs 2 Prorammable Analo Inputs Optional I/O Expansion Boards for: - RS-485 Serial Interface - Additional Inputs/ Outputs - Encoder Feedback 3 Prorammable Relay Outputs Metallic Conduit Connection System 2 Prorammable Analo Outputs AC Supply Input Motor Connection Output DC Bus Connection for: - DC Bus Choke - Common DC Bus - Reenerative Rectifier A ASK-4WEG Data is subject chane without notice.

29 Variable Frequency Drives CFW09 Keypad LED Display Intellient Keypad Intellient operator interface with double display, LED (7 sement) and LCD (2 lines with 16 characters), providin optimum distant viewin alon with a detailed description of all parameters and messaes. LCD Display Selectable Lanuae The lanuae of the LCD display messaes can be selected by the operator. Enlish, Spanish and Portuuese are available. REVERSE LED FORWARD LED Keypad Functions LOCAL LED REMOTE LED Oriented Start-up The CFW09 Oriented Start-up feature was specially created to facilitate and expedite the start-up procedure. At the first power-up or after a reset to factory default parameters, an automatic prorammin routine uides the operator throuh a sequence of steps to plu in the minimum parameters necessary for a perfect relationship between drive and motor. CFW09 Starts the VFD via a controlled acceleration ramp. When runnin switches the display indication: rpm - Volts - Status - Torque - Hz -Amps Stop the VFD via a controlled deceleration ramp. Resets the VFD after a fault trip has occurred. Increases the speed or parameter number/content. Copy Function This intellient keypad also incorporates a Copy Function, which allows copyin parameters from one drive to others, providin easy and reliable prorammin repeatability for duplicate applications. Keypad can store two complete sets of user parameters. Decreases the speed or parameter number/content. Switches the display between the parameter number and its content (position/content) for prorammin VFD A VFD B While pressed the motor is run at JOG speed. FWD/REV key. When pressed reverses the direction of rotation. CFW09 Keypad Keypad CFW09 Selects the VFD operatin mode as Local or Remote. Data is subject to chane without notice. WEG Automation - Products and Solutions A-29

30 Variable Frequency Drives CFW09 NEMA 1 Enclosure and compact product CFW10 CFW08 CFW09 CFW700 CFW11 Motor Volts 230V 460V Motor HP Drive AMPS Brakin Frame Dimensions (in.) App. List Multiplier Catalo Number Transistor Size H x W x D Shp. Wt. CT* VT* CT* VT* Price Symbol (lbs.) INPUT POWER SUPPLY: SINGLE OR THREE-PHASE - 230V 1 or CFW TDZ X 5.6 X $1,295 V1 2 7 CFW TDZ YES X 5.6 X $1,350 V CFW TDZ X 5.6 X $1,410 V1 INPUT POWER SUPPLY: THREE-PHASE - 230V 3 13 CFW TDZ X 5.6 X $1,440 V CFW TDZ X 7.2 X $1,542 V CFW TDZ YES X 7.2 X $2,020 V CFW TDZ X 7.2 X $2,201 V CFW TDZ X 8.9 X $3,310 V CFW TDZ X 9.8 X $4,400 V CFW TDZ X 13.2 X $6,600 V1 NO use CFW CFW TDZ X 13.2 X $7,222 V1 090XXXTDDBZ CFW TDZ X 13.2 X $9,000 V1 BELOW CFW TDZ X 13.2 X $9,909 V CFW TDZ X 13.2 X $10,590 V CFW TDDBZ (!) X 9.8 X $4,788 V CFW TDDBZ X 13.2 X $6,767 V CFW TDDBZ X 13.2 X $8,063 V CFW TDDBZ YES X 13.2 X $9,490 V CFW TDDBZ (!) X 13.2 X $10,550 V CFW TDDBZ (!) X 13.2 X $12,114 V CFW TDZ EXTERNAL** X 16.1 X $13,750 V CFW TDZ (!) X 16.1 X $19,600 V1 INPUT POWER SUPPLY: THREE PHASE - 460V 1 or CFW TGZ x 5.6 x $1,469 V CFW TGZ x 5.6 x $1,500 V CFW TGZ x 5.6 x $1,556 V1 5 9 CFW TGZ YES x 5.6 x $1,790 V CFW TGZ x 7.2 x $1,880 V CFW TGZ x 7.2 x $2,300 V CFW TGZ x 7.2 x $2,720 V CFW TGZ x 8.9 x $3,873 V CFW TGZ x 9.8 x $4,300 V CFW TGZ x 9.8 x $5,400 V CFW TGZ NO USE CFW x 13.2 x $6,030 V CFW TGZ 09XXXTGDBZ x 13.2 x $7,500 V CFW TGZ BELOW x 13.2 x $8,900 V CFW TGZ x 13.2 x $10,650 V CFW TGZ x 13.2 x $12,500 V CFW TGDBZ x 9.8 x $4,800 V CFW TGDBZ x 9.8 x $6,344 V CFW TGDBZ x 13.2 x $8,317 V CFW TGDBZ YES x 13.2 x $9,300 V CFW TGDBZ x 13.2 x $11,500 V CFW TGDBZ x 13.2 x $13,600 V CFW TGDBZ x 13.2 x $15,900 V CFW TGZ x 16.1 x $17,500 V CFW TGZ x 16.1 x $21,000 V CFW TGZ x 16.1 x $23,000 V CFW TGZ x 27.5 x $29,366 V1 EXTERNAL** CFW TGZ x 27.5 x $31,314 V CFW TGZ x 27.5 x $41,027 V CFW TGZ x 27.5 x $43,970 V CFW TGZ x 27.5 x $50,088 V1 * CT = Constant Torque; VT = Variable Torque ** See Options and Accessories Notes: 1) "HP" ratin based on TABLE NEC. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) Above 200HP enclosure is IP20 "finer safe". 3) All 575V drives are non-stocked items, consult WEG for availability. A ASK-4WEG Data is subject chane without notice.

31 Variable Frequency Drives CFW09 NEMA 1 Enclosure and compact product Motor Volts 575V Motor HP Drive Amps Brakin Frame Dimensions (in.) App. Shp. List Multiplier Catalo Number CT* VT* CT* VT* Transistor Size H x W x D Wt. (lbs.) Price Symbol INPUT POWER SUPPLY: THREE PHASE - 575V CFW THZ x 7.2 x $1,607 V CFW THZ x 7.2 x $1,665 V CFW THZ x 7.2 x $2,131 V1 YES CFW THZ x 7.2 x $2,229 V CFW THZ x 7.2 x $2,711 V CFW THZ x 7.2 x $3,023 V CFW THZ x 9.8 x $3,873 V CFW THZ x 9.8 x $4,552 V CFW THZ NO USE CFW x 9.8 x $6,197 V CFW THZ 09XXXTHDBZ x 13.2 x $8,258 V CFW THZ BELOW x 13.2 x $9,746 V CFW THZ x 13.2 x $11,600 V CFW THZ x 13.2 x $14,117 V CFW THDBZ x 9.8 x $4,311 V CFW THDBZ x 9.8 x $5,084 V CFW THDBZ x 9.8 x $6,892 V CFW THDBZ YES x 13.2 x $8,965 V CFW THDBZ x 13.2 x $10,497 V CFW THDBZ x 13.2 x $12,576 V CFW THDBZ x 13.2 x $15,992 V1 INPUT POWER SUPPLY: THREE PHASE to 690V CFW THZ 8E 45.1 x 16.1 x $17,182 V CFW THZ 8E 45.1 x 16.1 x $25,211 V CFW THZ 8E 45.1 x 16.1 x $34,172 V CFW THZ 10E 46.7 x 27.6 x $36,040 V1 EXTERNAL** CFW THZ 10E 46.7 x 27.6 x $39,039 V CFW THZ 10E 46.7 x 27.6 x $52,458 V CFW THZ 10E 46.7 x 27.6 x $56,553 V CFW THZ 10E 46.7 x 27.6 x $60,186 V1 Constant Torque; VT = Variable Torque ** See Options and Accessories Notes: 1) HP ratin based on TABLE NEC. ALWAYS compare motor FLA to Nominal AMPS of drive. 2) Above 200HP enclosure is IP20 finer safe. 3) All 575V drives are non-stocked items, consult WEG for availability. CFW09 Data is subject to chane without notice. WEG Automation - Products and Solutions A-31

32 CFW10 CFW08 CFW09 CFW700 CFW11 Variable Frequency Drives CFW09 Options and Accessories Dynamic Brakin Keypads Keypad Cables Communication *see note Caps I/O Expansion Boards Thru Surface Mountin Remote Stations Description Catalo Number List Multiplier Price Symbol External Dynamic Brakin Module for 180A Model (16 X 9 X 10 NEMA 1 Enclosure) DBW010165D36801 $1,902 V1 External Dynamic Brakin Module for 211 & 240A Models (16 X 9 X 10 NEMA 1 Enclosure) DBW010240D36801 $2,429 V1 External Dynamic Brakin Module for 312, 361,450,515, & 600A Models (16 X 9 X 10 NEMA 1 Enclosure) DBW010300D36801 $2,963 V1 External Dynamic Brakin Module for 107,147,211,& 247A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW020210D50691 (!) $3,702 V1 External Dynamic Brakin Module for 315 & 343A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW020300D50691 (!) $4,882 V1 External Dynamic Brakin Module for 418 & 472 Amp Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW020380D50691 (!) $6,052 V1 Standard Keypad with LED & LCD HMI-CFW09-LCD $202 V1 NEMA 4/IP56 Remote Keypad with LED & LCD HMI-CFW09-LCDN4 $261 V1 Remote Keypad FRAME KIT KMR-CFW09 $88 V1 Blank Keypad with Power & Error LED s TCL-CFW09 $27 V1 3.3ft Remote Keypad Cable CAB-HMI-09-1 $33 V1 6.6ft Remote Keypad Cable CAB-HMI-09-2 $39 V1 10ft Remote Keypad Cable CAB-HMI-09-3 $48 V1 16ft Remote Keypad Cable CAB-HMI-09-5 $72 V1 25ft Remote Keypad Cable (Requires KMR-CFW09) CAB-HMI-09-7 $86 V1 33ft Remote Keypad Cable (Requires KMR-CFW09) CAB-HMI-0910 $105 V1 Superdrive PC Communication Kit (includes software & hardware accessories) KSD-CFW09 $156 V1 RS-232 Serial Interface KCS-CFW09 $84 V1 Profibus DP Communication Kit KFB-PD $993 V1 DeviceNet Communication Kit KFB-DN $872 V1 Ethernet IP Communication Kit (V3.70 or superior) KFB-EN $1,608 V1 DeviceNet Profile Communication Kit (V2.27 or superior) KFB-DD (!)$1,094 V1 External DC Bus Cap Kit 1500uF (includes bleed resistor, mountin bracket, & screws) KIT KCE-CFW09/1500uF $114 V1 External DC Bus Cap Kit 4700uF (includes bleed resistor, mountin bracket, & screws) KIT KCE-CFW09/4700uF $284 V1 I/O Exp. Board A with Encoder Input, Encoder Output, RS-485 Serial Interface, I4 bit A/D, I4 bit D/A s, Diital Inputs and Outputs + Thermistor (PTC) Input EBA.01-CFW09 $1,345 V1 I/O Exp. Board A with RS-485 Serial Interface, Diital Inputs and Outputs + Thermistor (PTC) Input EBA.02-CFW09 $317 V1 I/O Exp. Board A with I4 bit A/D, I4 bit D/A s, Diital Inputs and Outputs + Thermistor (PTC) Input EBA.03-CFW09 $621 V1 I/O Exp. Board B with Encoder Input, Encoder Output, RS-485 Serial Interface, Isolated Analo Input, Isolated Analo Outputs, Diital Inputs and Outputs + Thermistor (PTC) Input EBB.01-CFW09 $1,133 V1 I/O Exp. Board B with Encoder Input, Diital Inputs and Outputs + Thermistor (PTC) Input EBB.02-CFW09 $533 V1 I/O Exp. Board B with Isolated Analo Input, Isolated Analo Outputs, Diital Inputs and Outputs + Thermistor (PTC) Input EBB.03-CFW09 $634 V1 I/O Exp. Board B with Encoder Input, 5V Power Supply for Encoder, Buffered Outputs for Encoder Sinals, RS-485 Serial Port, 24V Diital Input, 2 X 24V OC Diital Outputs, 0 10V/4-20mA Analo Input, 2 X 4-20mA Analo Outputs and PTC EBB.04-CFW09 $1,413 V1 Thermistor Input I/O Exp. Board B with 2 X 4-20mA Analo Outputs EBB.05-CFW09 $426 V1 I/O Exp. Board C with Encoder Input, 5-15VDC External Power Supply EBC1.01-CFW09 $184 V1 I/O Exp. Board C with Encoder Input with internal Power Supply - 5VDC EBC1.02-CFW09 (!) $511 V1 I/O Exp. Board C with Encoder Input with internal Power Supply - 12VDC EBC1.03-CFW09 $529 V1 I/O Exp. Board E with RS-485 Serial Interface, Diital Inputs and Outputs + Thermistor (PTC) Input EBE.01-CFW09 $183 V1 PLC/Motion Control Board PLC1.01 $985 V1 PLC/Motion Control Board PLC2.00 $1,170 V1 Kit for Throuh Surface Mountin - Size 3 KMF-CFW09-M3 $17 V1 Kit for Throuh Surface Mountin - Size 4 KMF-CFW09-M4 $20 V1 Kit for Throuh Surface Mountin - Size 5 KMF-CFW09-M5 $23 V1 Kit for Throuh Surface Mountin - Size 6 KMF-CFW09-M6 $26 V1 Kit for Throuh Surface Mountin - Size 7 KMF-CFW09-M7 $29 V1 Kit for Throuh Surface Mountin - Size 8 KMF-CFW09-M8 $36 V1 Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends (22mm) replaces CFW-REM CSW-SP3PBS $460 Z5 Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends (30mm) replaces CFW-REM CSW30-SP3PBS $535 Z5 Notes: (!) Non-Stocked Item, consult WEG for availability *Mobus RTU - Requires optional RS-232 or RS-485 Interface A ASK-4WEG Data is subject chane without notice.

33 Variable Frequency Drives CFW09 Options and Accessories Complete Keypad (Standard) HMI CFW09 LCD Intellient Operator Interface with double display (LED and LCD), plain Enlish messaes and COPY Function. Local or remote installation. NEMA 4 Remote Keypad HMI CFW09 LCDN4 NEMA 4/IP55 remote keypad, for installation on panel door or remote operator station in harsh environments, such as splashin or hose-directed water and windblown dust. Maximum cable lenth: 33ft (10m) Remote Keypad Frame Kit KMR CFW09 Frame for remote keypad mountin on panel door or operator station. Optional up to 15ft (5m) cable. Maximum cable lenth; 33 ft (10m) Remote Keypad Cables CAB HMI 09 X Cables with lenths (x) of 3.3, 6.6, 10,,15, 25 and 33ft (1, 2, 3, 5, 7.5 and 10m) 7.5 and 10m must use the KMRCFW09 frame kit. Special cables available upon request. CFW09 Remote Control Station-22mm CSW-SP3PBS The remote control station is a 3-hole NEMA 4 pushbutton station with 22mm Start and Stop push buttons and a 5K potentiometer. Alternative confiurations are available, consult factory for details. Remote Control Station-30mm CSW30-SP3PBS The remote control station is a 3-hole NEMA 4 pushbutton station with 30mm Start and Stop push buttons and a 5K potentiometer. Alternative confiurations are available, consult factory for details. Alternative confiurations are available, consult factory for details. RS-232 Serial Interface KCS CFW09 RS-232 Serial Interface Module to connect the CFW09 to a PC or other equipment via a RS-232 Serial Link. PC Communication Kit KSD CFW09 WEG Superdrive is a windows based software proram that allows serial (RS-232 or RS-485) communication between a PC and WEG Soft Starters and Variable Frequency Drives. Superdrive is an excellent prorammin, documentation and troubleshootin tool for WEG Soft Starters and VFD s. Superdrive is available for free download at Hardware accessories may be required, dependin on the Soft Starter or VFD line. Not available for SSW06. Data is subject to chane without notice. WEG Automation - Products and Solutions A-33

34 Variable Frequency Drives CFW09 Options and Accessories CFW10 CFW08 PLC / Motion Control Board PLC 1.01 & PLC 2.00 PLC-01 / PLC-02 : WEG Interal PLC The PLC01/02 boards add important PLC (Prorammable Loical Controller) functions to the CFW-09, enablin the execution of complex loic proram by usin the diital and analo inputs and outputs as well as the diital and analo inputs and outputs of the own inverter which can be accessed by the user proram. Functions include simple contacts and coils up to functions that uses floatin point, such as sum, subtraction, multiplication, division, trionometry, square root functions, etc. Other important functions are the PID blocks, hih-pass and low-pass filters, saturation, comparison. All these functions operate with floatin point. Besides the functions mentioned above, the PLC1 provides blocks for motor speed and motor position control, that is a trapezoidal-profile positionin and a S-profile positionin, speed reference eneration with trapezoidal acceleration ramp, etc. (Note: when position functions used, the couplin of an encoder on motor shaft is required). All functions can interact with the user throuh the 100 prorammable parameters that can be accessed directly throuh the inverter HMI. The texts and user units of the prorammable parameters can be customized by the WLP. CFW09 Ethernet IP KFB - EN ProfiBus DP KFB - PD DeviceNet KFB - DN I/O EXPANSION BOARDS EBA.0X - CFW09 EBB.0X - CFW09 EBC1.0X - CFW09 EBE.0X - CFW09 CFW700 CFW11 Available Features EBA-XX EBB-XX EBC-XX EBE Standard Encoder Input 12VDC Encoder output VDC Analo inputs 10bits Analo inputs 14bits Isolated analo inputs 10bits Isolated diital inputs Isolated PTC input Isolated RS Isolated AO 0..10V - 0/4...20mA Isolated transistor output Analo outputs 14bits Encoder Input ext. supply 5VDC Encoder Input 5VDC Relay outputs 1A 240VAC A ASK-4WEG Data is subject chane without notice.

35 Variable Frequency Drives CFW09 DB Resistors DB Resistors 10% Duty Cycle Motor Volts 230 V 460V Motor HP For Use with CFW-09 Model Number: Catalo Number OHMS WATTS Dimensions H x W x D List Price Multiplier Symbol 1.5 CFW TDZ CFDB39-224* X 5 X 4 $183 V1 2 CFW TDZ CFDB27-298* X 5 X 4 $183 V1 3 CFW TDZ CFDB27-298* X 5 X 4 $183 V1 3 CFW TDZ CFDB X 5 X 4 $183 V1 5 CFW TDZ CFDB22-373* X 5 X 4 $183 V1 7.5 CFW TDZ CFDB X 7 X 5 $319 V1 10 CFW TDZ CFDB X 7 X 5 $319 V1 15 CFW TDZ CFDB X 10 X 5 $481 V1 20 CFW TDDBZ CFDB X 16 X 5 $795 V1 25 CFW TDDBZ CFDB X 10 X 5 $944 V1 30 CFW TDDBZ CFDB X 13 X 5 $1,092 V1 40 CFW TDDBZ CFDB X 10 X 5 $1,508 V1 50 CFW TDDBZ CFDB X 10 X 5 $1,508 V1 1.5 CFW TGZ CFDB * X 5 X 4 $183 V1 2 CFW TGZ CFDB * X 5 X 4 $183 V1 3 CFW TGZ CFDB * X 5 X 4 $183 V1 5 CFW TGZ CFDB47-746* X 7 X 5 $319 V1 7.5 CFW TGZ CFDB47-746* X 7 X 5 $319 V1 10 CFW TGZ CFDB33-746* X 7 X 5 $319 V1 15 CFW TGZ CFDB X 10 X 5 $481 V1 20 CFW TGZ CFDB X 13 X 5 $638 V1 25 CFW TGDBZ CFDB X 10 X 5 $996 V1 30 CFW TGDBZ CFDB X 10 X 5 $996 V1 40 CFW TGDBZ CFDB X 10 X 5 $1,044 V1 50 CFW TGDBZ CFDB X 10 X 5 $1,044 V1 60 CFW TGDBZ CFDB X 10 X 5 $1,389 V1 75 CFW TGDBZ CFDB X 13 X 5 $1,848 V1 100 CFW TGDBZ CFDB X 16 X 5 $2,062 V1 150 CFW TGZ** CFDB X 13 X 10 $2,957 V1 150 CFW TGZ** CFDB X 13 X 10 $3,557 V1 200 CFW TGZ** CFDB X 13 X 10 $3,557 V1 250 CFW TGZ** CFDB X 13 X 15 $5,247 V1 300 CFW TGZ** CFDB X 13 X 15 $5,247 V1 350 CFW TGZ** CFDB X 24 X 24 $6,733 V1 450 CFW TGZ** CFDB X 24 X 30 $9,952 V1 500 CFW TGZ** CFDB X 24 X 30 $9,952 V1 CFW09 Note: These are non-stocked items, consult WEG for availability. **External DB Transistor Module DBWXXXXD36801 must be ordered Data is subject to chane without notice. WEG Automation - Products and Solutions A-35

36 Variable Frequency Drives CFW09 DB Resistors DB Resistors 20% Duty Cycle - NEMA 1 Enclosure CFW10 CFW08 CFW09 CFW700 CFW11 Motor Volts 230 V 460V Motor HP For Use with CFW-09 Model Number: Catalo Number OHMS WATTS Dimensions H x W x D List Price Multiplier Symbol 1.5 CFW TDZ CFDB39-224* X 5 X 4 $183 V1 2 CFW TDZ CFDB27-298* X 5 X 4 $183 V1 3 CFW TDZ CFDB27-448* X 7 X 5 $319 V1 3 CFW TDZ CFDB X 7 X 5 $319 V1 5 CFW TDZ CFDB22-746* X 7 X 5 $319 V1 7.5 CFW TDZ CFDB , X 10 X 5 $481 V1 10 CFW TDZ CFDB , X 16 X 5 $795 V1 15 CFW TDZ CFDB X 13 X 5 $1,092 V1 20 CFW TDDBZ CFDB X 10 X 5 $1,215 V1 25 CFW TDDBZ CFDB X 10 X 5 $1,403 V1 30 CFW TDDBZ CFDB X 10 X 5 $1,403 V1 40 CFW TDDBZ CFDB X 13 X 5 $1,870 V1 50 CFW TDDBZ CFDB X 13 X 5 $1,870 V1 1.5 CFW TGZ CFDB * X 5 X 4 $183 V1 2 CFW TGZ CFDB * X 5 X 4 $183 V1 3 CFW TGZ CFDB * X 7 X 5 $319 V1 5 CFW TGZ CFDB47-746* X 7 X 5 $319 V1 7.5 CFW TGZ CFDB * 47 1, X 10 X 5 $481 V1 10 CFW TGZ CFDB * 33 1, X 13 X 5 $638 V1 15 CFW TGZ CFDB X 10 X 5 $944 V1 20 CFW TGZ CFDB X 10 X 5 $944 V1 25 CFW TGDBZ CFDB X 10 X 5 $1,293 V1 30 CFW TGDBZ CFDB X 10 X 5 $1,385 V1 40 CFW TGDBZ CFDB X 13 X 5 $1,708 V1 50 CFW TGDBZ CFDB X 16 X 5 $2,032 V1 60 CFW TGDBZ CFDB X 13 X 10 $2,595 V1 75 CFW TGDBZ CFDB X 13 X 10 $2,957 V1 100 CFW TGDBZ CFDB X 13 X 10 $3,557 V1 150 CFW TGZ** CFDB X 13 X 15 $5,644 V1 150 CFW TGZ** CFDB X 24 X 18 $6,706 V1 200 CFW TGZ** CFDB X 24 X 18 $6,706 V1 250 CFW TGZ** CFDB X 24 X 30 $9,516 V1 300 CFW TGZ** CFDB X 24 X 30 $9,516 V1 350 CFW TGZ** CFDB X 24 X 37 $13,717 V1 400 CFW TGZ** CFDB X 24 X 38 $14,084 V1 500 CFW TGZ** CFDB X 24 X 38 $14,084 V1 Note: These are non-stocked items, consult WEG for availability. **External DB Transistor Module A ASK-4WEG Data is subject chane without notice.

37 Variable Frequency Drives CFW09 and CFW11 Line & Load Reactors Line and Load Reactors 3% Z (Impedance) NEMA 1 Enclosure Motor Volts 230V 460V Motor HP Reactor AMPS Catalo Number Dimensions H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol 3 12 LRW012D3N1 8 x 8 x 6 16 $436 V LRW018D3N1 8 x 8 x 6 16 $512 V LRW025D3N1 13 x x $590 V LRW035D3N1 13 x x $634 V LRW045D3N1 13 x x $756 V LRW055D3N1 13 x x $890 V1 25/30 80 LRW080D3N1 13 x x $905 V LRW100D3N1 13 x x $1,086 V LRW130D3N1 13 x x $1,175 V LRW160D3N1 13 x x $1,424 V LRW200D3N1 13 x x $1,488 V LRW002G3N1 8 x 8 x 6 11 $387 V1 2/3 4 LRW004G3N1 8 x 8 x 6 11 $394 V1 5 8 LRW008G3N1 8 x 8 x 6 14 $425 V LRW012G3N1 8 x 8 x 6 16 $452 V LRW018G3N1 8 x 8 x 6 16 $519 V LRW025G3N1 13 x x $634 V1 20/25 35 LRW035G3N1 13 x x $654 V LRW045G3N1 13 x x $855 V LRW055G3N1 13 x x $948 V1 50/60 80 LRW080G3N1 13 x x $1,179 V LRW100G3N1 13 x x $1,168 V LRW130G3N1 13 x x $1,468 V LRW160G3N1 13 x x $1,994 V LRW200G3N1 13 x x $1,758 V LRW250G3N1 24 x x $2,990 V LRW320G3N1 24 x x $3,233 V LRW400G3N1 24 x x $4,962 V1 350/ LRW500G3N1 47 x 26.5 x $6,768 V1 450/ LRW600G3N1 47 x 26.5 x $7,329 V1 750/ LRW1000G3N1 available upon request $10,651 V1 CFW09 Note: These are non-stocked items, consult WEG for availability. Data is subject to chane without notice. WEG Automation - Products and Solutions A-37

38 Variable Frequency Drives CFW09 Technical Data Power Supply Voltae Three Phase V: 220 / 230 V (+10%, -15%) - 1 ø up to 3HP without de-ratin V: 380 / 400 / 415 / 440 / 460 / 480 V (+10&, -15%) Frequency 50 / 60 Hz +/- 2 Hz (48 62 Hz) Phase Unbalance Up to 3% Cos (Displacement Power Factor) Greater than 0.98 CFW09 Enclosure Control Performance Control Inputs Control Outputs Communication Safety Deree of Protection NEMA 1 / IP 20 (sizes 1 to 8) IP 20 (Sizes 9 and 10) Finishin Color Plastic Cover Liht Gray PANTONE 413C (sizes 1 and 2) Metallic Cover and Sides Liht Gray RAL 7032 (sizes 3 to 10) Base Dark Gray RAL 7022 (sizes 3 to 10) Power Supply Switched Mode Power Supply Fed from the DC Link Microprocessor 32 bit RISC Technoloy PWM Technique SVM Sine wave PWM (Space Vector Modulation) Software Implemented Current, Flux and Speed Reulators (Full Diital) Control Modes Scalar (Voltae Source V/F) Sensorless Vector (without encoder) Flux Vector with Encoder Switchin Frequency 1.25 / 2.5 / 5.0 / 10 khz Frequency Rane Hz for V / F and Vector with Encoder Control (60 Hz Motor) Hz for V / F and Vector with Encoder Control (50 Hz Motor) Hz for Sensorless Vector Control (50 or 60 Hz Motor) Overload Capacity 150% for 60 seconds, every 10 minutes 180% for 1 second every 10 minutes Efficiency Greater than 97% Speed Control V / F Mode Reulation (with Slip Compensation) 1% of Motor Rated Speed Resolution : 1 rpm (keypad reference) Speed Reulation Rane : 20:1 Sensorless Vector Mode Reulation : 0.5% of Motor Rated Speed Resolution : 1 rpm (keypad reference) Rane : 100:1 Flux Vector Mode wih Encoder Reulation with: 10 bit Analo Reference: +/- 0.1% of Motor Rated Speed 14 bit Analo Reference: +/- 0.01% of Motor Rated Speed1 Diital Reference (Ex: Keypad or Serial): +/- 0.01% of Motor Rated Speed Rane : Down to 0 rpm Torque Control Flux Vector Modes Reulation: +/- 10% of Motor Rated Torque Rane : 0 150% of Motor Rated Torque Analo 2 Prorammable Differential Inputs (10 bit) : 0 10 V, 0 20 ma or 4 20 ma (Non isolated) 1 Prorammable Isolated Bipolar Input (14 bit) : V, 0 20 ma or 4 20 ma with expansion board EBA.01 1 Prorammable Isolated Input (10 bit) : 0 10 V, 0 20 ma or 4 20 ma with expansion board EBA.01 Diital 6 Prorammable Isolated Input : 24 Vdc 1 Prorammable Isolated Input : 24 Vdc with expansion board 1 Prorammable Isolated Input : 24 Vdc (for Motor PTC Thermistor) with expansion board Encoder 1 Differential Input, with 12 Vdc Internal Isolated Power Supply (14 bit resolution) 1 Analo 2 Prorammable Outputs (11 bit) : 0 10 V (Non isolated) 2 Prorammable Bipolar Outputs (14 bit) : V 1 2 Prorammable Isolated Outputs (11 bit) : 0 20 ma or 4 20 ma 1 Relay 2 Prorammable Outputs, Form C Contacts (NO/NC) : 240 Vac, 1 A 1 Prorammable Output, Form A Contact (NO) : 240 Vac, 1 A Transistor 2 Prorammable Isolated Outputs (Open Collector) : 24 Vdc, 50 ma 1 Encoder 1 Isolated Differential Encoder Sinals Output : 5 15 Vdc External Power Supply 1 Serial RS-232 with KCS-CFW09 Kit 1 RS-485, Isolated, with EBA, EBE or EBB Board 1 Field Bus Profibus DP, DeviceNet or Modbus RTU, with KFB kits 1 Protections DC Link Over Voltae Output Short Circuit DC Link Under Voltae Output Ground Fault VFD Over Temperature External Fault Motor Over Temperature 1 Self-dianosis Fault Output Over Current Prorammin Error Motor Overload (i x t) Serial Communication Fault Dynamic Brakin Resistor Overload Motor or Encoder Connection Fault CPU / EPROM Error (Watchdo) Power Supply Phase Fault (30 A and above models) Encoder Fault Keypad Connection Fault A ASK-4WEG Data is subject chane without notice.

39 Variable Frequency Drives CFW09 Technical Data Temperature 0 104ºF (40ºC), up to 122ºF (50ºC) with 2% / ºC Output Current De-ratin Ambient Humidity 5 90% Non Condensin Altitude ft (1000 m) (up to ft (4000 m) with 10% / 1000 m Output Current De-Ratin Conformities EMC Directive 89 / 336/ EEC EN Electromanetic Compatibility Industrial Environment EMC - Emission and Immunity LVC 73/23/EEC Low Voltae Directive IEC 146 Semiconductor Inverters UL 508 C Power Conversion Equipment EN Electronic Equipment for use in power installations EN Saftey Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Certifications UL (USA) and cul (Canada) Underwriters Laboratories Inc. USA CE (Europe) Phoenix Test - Labs GmbH - Germany Prorammin Commands General VFD Functions Prorammin Start / Stop, Increase / Decrease Speed, JOG, FWD/REV and Local/Remote Monitorin Speed Reference (rpm) Output Current (A) Motor Speed (rpm) Output Voltae (Vac) Speed Proportional Value (Ex: ft/min) VFD Status Keypad Output Frequency (Hz) Diital Inputs Status DC Link Voltae (Vdc) Transistor Outputs Status Motor Torque (%) Relay Outputs Status Output Power (kw) Analo Inputs Value Hours Powered Up (h) Four Last Faults Hours Enabled (h) Fault Messaes Standard Keypad with LCD + LED displays (HMI:-CFW09-LCD) Password to protect VFD prorammin LCD display lanuae selection: Enlish, Spanish and Portuuese Control mode selection (via parameter): V / F, Sensorless Vector or Vector with Encoder Fault auto-dianosis and auto-reset Parameters reset to factory or user default VFD Self-tnin to motor and load (Vector Modes) Specific unit indication (Ex: I/s, th, %, etc) Motor slip compensation (V / F Mode) Manual and automatic Torque Boost (V / F Mode) Adjustable V / F Curve (V / F Mode) Minimum and maximum speed limits Output current limit Adjustable motor overload protection Diital ain and offset adjustments for the analo inputs Diital ain adjustments for the analo outputs JOG function JOG +/ JOG - function (momentary speed increase/decrease, phase shift) Control Features COPY function (VFD / Keypad or Keypad / VFD) and Options Comparison functions for the diital outputs: N*> Nx; N> Nx; N < Nx; N = 0; N = N*; Is > Ix; Is < Ix; T > Tx and T < Tx Where: N = Motor speed; N* = Speed reference is; Is = Output current and T = Motor torque Linear and S independent acceleration and deceleration ramps, two sets of ramps DC Brakin Optimal Brakin (Vector Modes) Built-in dynmanic brakin transistor - Models up to 45A / V and 30A / V Multi-speed function (up to 8 preset speeds) Speed Profilin function Hour meter and Wattmeter PID reulation (for automatic control of level, pressure, flow, etc.) FWD / REV selection Local / Remote operation selection Flyin start function (restart with tne motor spinnin) Skip speed (critical speed rejection) Ride-throuh (operation durin momentary power loss) Built-in dynamic brakin transistor: Models A / V and A / V Options Remote keypad cable (3.3, 6.6, 10,16, 25 and 35ft) Blank keypad for local installation Blank keypad for remote installation Remote Keypad frame kit I/0 Expansion Boards FieldBus Communications Kit (Mounted inside VFD) CFW09 Data is subject to chane without notice. WEG Automation - Products and Solutions A-39

40 CFW700 Variable Frequency Drive The WEG CFW700 Series was desined to exceed industry expectations. Based on the robust CFW11 platform the CFW700 is desined and optimized for variable torque applications such as pumps and fans. Applications CFW700 Pumps Fans / Blowers Conveyors Compressors Aitators and Mixers Extruders Grizzly Feeders Centrifues Cranes and Hoists Rollout Tables Presses Saws Standard Features Simplicity same prorammin as all other WEG drives Dual DC Bus chokes for loner VFD lifetime (6% equivalent), reduces harmonics eliminatin the need for external line reactors 24VDC Power Supply for process transducers - Standard Soft-PLC with free prorammin software Encoder Input - Standard RS-485 Modbus RTU - Standard Conformal Coated boards for harsh industrial environments Rated 50 C (122 F) up to 60 C (140 F) with deratin Self-tunin function automatically matches VFD with motor UL, cul, CE, C-Tick, GOST, IRAM, INMETRO approved SuperDrive G2 compatible The CFW700 is the optimal drive for pump and fan control. The drive includes features such as built in PID controllers that can be prorammed in enineerin units for ease of understandin and set up. The drive also features an interated power supply to be used with external transducers to measure flow or pressure. These features combined with the drive s keypad based start up uide, make installation and parameter set up fast and easy. A ASK-4WEG Data is subject chane without notice.

41 CFW700 Variable Frequency Drives 1.5 to 175 HP Codin 1 CFW700 2 A 3 03P6 4 T DB 7 N1 8 C3 1. CFW700 series 2. Frame Size: = A, B, C, D or E 3. Rated Current for Normal Duty (ND) P= decimal point 03P6 = 3.6A 0211 = 211A 4. Number of Phase: B = Sinle phase or Three phase S = Sinle phase T = Three Phase 5. Input Voltae: 2 = VAC 4 = VAC CFW Brakin module: NB = no built-in IGBT DB = built-in brakin IGBT (standard for frame sizes A, B, C and D) 7. Enclosure: N1 = NEMA 1 8. Conducted Emission Level: Blank = without RFI filter C3 = accordin to cateory 3 of IEC standard Data is subject to chane without notice. WEG Automation - Products and Solutions A-41

42 CFW700 Technoloy WEG Vectrue Technoloy uses field oriented vector control alorithms 4 in 1: four control modes in one drive, Linear and adjustable V/F, VVW (Voltae Vector WEG), field oriented Sensorless Vector and Vector with encoder Enery savin V/F control allows user to adjust V/F curve to match a quadratic (centrifual) load, optimizin the drive for the specific application and maximizin enery savins. Keypad The CFW700 comes equipped with a numeric LCD display capable of providin readins for prorammin, uidin start-up, and troubleshootin. Back liht LCD display Displays 3 variables simultaneously CFW700 Remote mountin HMI for panel assembly solutions ( it can be placed up to 100ft from the drive) WEG, a leadin lobal motor manufacturer, has been manufacturin VFDs and soft starts for nearly 30 years. All of our VFDs and all of our soft starts are desined and manufactured by WEG. We maintain strenuous quality control standards and our drives, like our motors, are built to last a lifetime. A ASK-4WEG Data is subject chane without notice.

43 Variable Frequency Drives CFW700 NEMA1 CFW700D0105T2DBN1 Voltae V Normal Duty VT - 110% / 1min Heavy Duty CT - 150% / 1min HD HD HP Amps ND ND HP CATALOG NUMBER Amps INPUT POWER SUPPLY: SINGLE OR THREE PHASE V DIMENSIONS H x W x D Frame Size Enclosure Wt. Lbs. LIST PRICE CFW700A06P0B2DBN x 5.71 x 8.94 A NEMA $1,370 V CFW700A07P0B2DBN x 5.71 x 8.94 A NEMA $1,430 V1 INPUT POWER SUPPLY: SINGLE PHASE V CFW700A10P0S2DBN x 5.71 x 8.94 A NEMA $1,510 V1 INPUT POWER SUPPLY: THREE PHASE V CFW700A07P0T2DBN x 5.71 x 8.94 A NEMA $1,350 V CFW700A10P0T2DBN x 5.71 x 8.94 A NEMA $1,410 V CFW700A13P0T2DBN x 5.71 x 8.94 A NEMA $1,440 V CFW700A16P0T2DBN x 5.71 x 8.94 A NEMA $1,542 V CFW700B24P0T2DBN x 7.45 x 8.94 B NEMA $2,020 V CFW700B28P0T2DBN x 7.45 x 8.94 B NEMA $2,201 V CFW700B33P5T2DBN x 7.45 x 8.94 B NEMA $2,600 V CFW700C45P0T2DBN x 8.66 x C NEMA $2,900 V CFW700C54P0T2DBN x 8.66 x C NEMA $3,700 V CFW700C70P0T2DBN x 8.66 x C NEMA $4,880 V CFW700D86P0T2DBN x x 12 D NEMA $6,101 V CFW700D0105T2DBN x x 12 D NEMA $8,100 V CFW700E142T2NBN1C x 13.2 x 14.1 E NEMA $10,101 V CFW700E180T2NBN1C x 13.2 x 14.1 E NEMA $12,999 V CFW700E211T2NBN1C x 13.2 x 14.1 E NEMA $18,555 V CFW700E142T2DBN1C x 13.2 x 14.1 E NEMA $11,500 V CFW700E180T2DBN1C x 13.2 x 14.1 E NEMA $15,500 V CFW700E211T2DBN1C x 13.2 x 14.1 E NEMA $21,222 V1 Multiplier Symbol Voltae V Notes: ND HP ND HD DIMENSIONS Frame Wt. LIST Multiplier HD HP CATALOG NUMBER Enclosure Amps Amps H x W x D Size Lbs. PRICE Symbol INPUT POWER SUPPLY: THREE PHASE V CFW700A03P6T4DBN x 5.71 x 8.94 A NEMA $1,350 V CFW700A05P0T4DBN x 5.71 x 8.94 A NEMA $1,444 V CFW700A07P0T4DBN x 5.71 x 8.94 A NEMA $1,510 V CFW700A10P0T4DBN x 5.71 x 8.94 A NEMA $1,600 V CFW700A13P5T4DBN x 5.71 x 8.94 A NEMA $1,711 V CFW700B17P0T4DBN x 7.45 x 8.94 B NEMA $2,055 V CFW700B24P0T4DBN x 7.45 x 8.94 B NEMA $2,455 V CFW700B31P0T4DBN x 7.45 x 8.94 B NEMA $3,450 V CFW700C38P0T4DBN x 8.66 x C NEMA $3,888 V CFW700C45P0T4DBN x 8.66 x C NEMA $5,000 V CFW700C58P5T4DBN x 8.66 x C NEMA $5,800 V1 50/ CFW700D70P5T4DBN x x 12 D NEMA $6,888 V CFW700D88P0T4DBN x x 12 D NEMA $8,100 V CFW700E105T4NBN1C x x 12 E NEMA $9,999 V1 100/ CFW700E142T4NBN1C x 13.2 x 14.1 E NEMA $12,000 V CFW700E180T4NBN1C x 13.2 x 14.1 E NEMA $15,400 V CFW700E211T4NBN1C x 13.2 x 14.1 E NEMA $18,787 V CFW700E105T4DBN1C x x 12 E NEMA $11,989 V1 100/ CFW700E142T4DBN1C x 13.2 x 14.1 E NEMA $14,989 V CFW700E180T4DBN1C x 13.2 x 14.1 E NEMA $20,989 V CFW700E211T4DBN1C x 13.2 x 14.1 E NEMA $25,989 V1 "HP" ratin based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors". Use as a uide only. Motor FLA may vary with speed and manufacturer. CFW700 Data is subject to chane without notice. WEG Automation - Products and Solutions A-43

44 Variable Frequency Drives CFW700 Accessories Communication & Flash Memory Modules Keypad Accessories Cables for HMI Conduit Kits Shieldin Kits DESCRIPTION CATALOG NUMBER LIST PRICE Multiplier Symbol CAN interface module (CANopen/DeviceNet) - used with CFW11/CFW700 CAN-01 $410 V1 Profibus DP-V1 interface module PROFIBUS DP-01 $520 V1 Flash Memory Module for CFW700 MMF-02 $71 V1 CFW700 keypad HMI-02 $320 V1 Frame for keypad remote assembly RHMIF-02 $69 V1 Blank cover for keypad slot HMID-01 $54 V1 1m (3.3ft) Remote Keypad Cable IHM-CAB-RS-1M $54 V1 2m (6.6ft) Remote Keypad Cable IHM-CAB-RS-2M $60 V1 3m (10ft) Remote Keypad Cable IHM-CAB-RS-3M $66 V1 5m (16ft) Remote Keypad Cable IHM-CAB-RS-5M $75 V1 7.5m (25ft) Remote Keypad Cable IHM-CAB-RS-7.5M $90 V1 10m (33ft) Remote Keypad Cable IHM-CAB-RS-10M $102 V1 NEMA 1 Conduit Kit for frame size A + Power cables shieldin KN1A-02 $125 V1 NEMA 1 Conduit Kit for frame size B+ Power cables shieldin KN1B-02 $125 V1 NEMA 1 Conduit Kit for frame size C+ Power cables shieldin KN1C-02 $142 V1 NEMA 1 Top cover kit for frame size E (105 & 142A) KN1E-01 $78 V1 NEMA 1 Top cover kit + Conduit kit for frame size E (180 & 211A) KN1E-02 $213 V1 IP21 Kit for Frame size D (top cover) KIP21D-01 $120 V1 Power Cables Shieldin Kit for frame size A PCSA-01 $48 V1 Power Cables Shieldin Kit for frame size B PCSB-01 $51 V1 Power Cables Shieldin Kit for frame size C PCSC-01 $54 V1 Power cables shieldin kit for frame size D PCSD-01 $56 V1 Power cables shieldin kit for frame size E PCSE-01 $76 V1 CFW700 A ASK-4WEG Data is subject chane without notice.

45 Variable Frequency Drives CFW700 DB Resistors 100% Brakin Torque - 20% Duty Cycle NEMA 1 Enclosure Motor Volts 230 V 460V Motor HP For Use with CFW700 Model Number: Catalo Number Rated OHM WATTS Dimensions W x D x H Max. Brakin Time 1.5 CFW700A6P0B2DBN1 CFDB x5x5 12s $520 V1 2 CFW700A7P0B2DBN1 CFDB x7x5 12s $749 V1 2 CFW700A7P0T2DBN1 CFDB x7x5 12s $749 V1 3 CFW700A10P0T2DBN1 CFDB x7x5 12s $749 V1 3 CFW700A10P0T2DBN1 CFDB x7x5 12s $749 V1 5 CFW700A13P0T2DBN1 CFDB x10x5 12s $941 V1 5 CFW700A16P0T2DBN1 CFDB x10x5 12s $941 V1 7.5 CFW700B24P0T2DBN1 CFDB ,119 12x13x5 12s $1,130 V1 10 CFW700B28P0T2DBN1 CFDB ,492 12x16x5 12s $1,322 V1 10 CFW700B33P5T2DBN1 CFDB ,492 12x16x5 12s $1,322 V1 15 CFW700C45P5T2DBN1 CFDB ,238 19x10x5 12s $1,644 V1 20 CFW700C54P0T2DBN1 CFDB ,984 19x10x5 12s $1,644 V1 25 CFW700C70P0T2DBN1 CFDB ,730 19x13x5 12s $1,997 V1 30 CFW700D0105T2DBN1 CFDB , x13x5 12s $2,588 V1 40 CFW700D86P0T2DBN1 CFDB , x16x5 12s $3,269 V1 50 CFW700E142T2NBN1C3 CFDB ,460 28x10x10 12s $3,820 V1 60 CFW700E180T2NBN1C3 CFDB ,952 28x10x10 12s $3,820 V1 75 CFW700E211T2NBN1C3 CFDB ,190 28x13x10 12s $5,622 V1 2 CFW700A3P6T4DBN1 CFDB x7x5 12s $749 V1 3 CFW700A5P0T4DBN1 CFDB x7x5 12s $749 V1 5 CFW700A7P0T4DBN1 CFDB x10x5 12s $941 V1 7.5 CFW700A10P0T4DBN1 CFDB ,119 12x13x5 12s $1,130 V1 10 CFW700A13P5T4DBN1 CFDB ,492 12x16x5 12s $1,322 V1 10 CFW700B17P0T4DBN1 CFDB ,492 12x16x5 12s $1,322 V1 15 CFW700B24P0T4DBN1 CFDB ,238 19x13x5 12s $1,820 V1 20 CFW700B31P0T4DBN1 CFDB ,984 19x16x5 12s $2,201 V1 25 CFW700C38P0T4DBN1 CFDB , x13x5 12s $2,511 V1 30 CFW700C45P0T4DBN1 CFDB , x13x5 12s $2,511 V1 40 CFW700C58P5T4DBN1 CFDB , x16x5 12s $2,938 V1 50/60 CFW700D70P5T4DBN1 CFDB ,952 28x13x10 12s $4,328 V1 75 CFW700D88P0T4DBN1 CFDB ,190 28x16x10 12s $5,659 V1 75 CFW700E105P0T4NBN1C3 CFDB ,190 28x16x10 12s $5,659 V1 100/125 CFW700E142P0T4NBN1C3 CFDB ,650 30x18x24 12s $9,560 V1 150 CFW700E180P0T4NBN1C3 CFDB ,380 30x18x24 12s $11,854 V1 175 CFW700E211P0T4NBN1C3 CFDB ,840 30x18x24 12s $11,854 V1 List Price Multiplier Symbol CFW700 Note: These are non-stocked items, consult WEG for availability. NEMA 1 Enclosure Maximum brakin time based on cycle of 60 seconds Data is subject to chane without notice. WEG Automation - Products and Solutions A-45

46 Variable Frequency Drives CFW700 DB Resistors 100% Brakin Torque - 50% Duty Cycle NEMA 1 Enclosure CFW700 Motor Volts 230 V 460V Motor HP For Use with CFW700 Model Number: Catalo Number Rated OHM WATTS Dimensions W x D x H Max. Brakin Time 1.5 CFW700A6P0B2DBN1 CFDB x10x5 30s $941 V1 2 CFW700A7P0B2DBN1 CFDB x10x5 30s $941 V1 2 CFW700A7P0T2DBN1 CFDB x10x5 30s $941 V1 3 CFW700A10P0T2DBN1 CFDB ,119 12x10x5 30s $1,130 V1 3 CFW700A10P0T2DBN1 CFDB ,119 12x10x5 30s $1,130 V1 5 CFW700A13P0T2DBN1 CFDB ,865 19x13x5 30s $1,820 V1 5 CFW700A16P0T2DBN1 CFDB ,865 19x13x5 30s $1,820 V1 7.5 CFW700B24P0T2DBN1 CFDB , x13x5 30s $2,511 V1 10 CFW700B28P0T2DBN1 CFDB , x13x5 30s $2,511 V1 10 CFW700B33P5T2DBN1 CFDB , x13x5 30s $2,511 V1 15 CFW700C45P5T2DBN1 CFDB , x16x5 30s $2,938 V1 20 CFW700C54P0T2DBN1 CFDB ,460 28x13x10 30s $4,663 V1 25 CFW700C70P0T2DBN1 CFDB ,325 28x13x10 30s $4,663 V1 30 CFW700D0105T2DBN1 CFDB ,190 28x16x11 30s $5,254 V1 40 CFW700D86P0T2DBN1 CFDB , x16x5 30s $6,762 V1 50 CFW700E142T2NBN1C3 CFDB ,650 30x18x24 30s $10,325 V1 60 CFW700E180T2NBN1C3 CFDB ,380 30x18x24 30s $10,325 V1 75 CFW700E211T2NBN1C3 CFDB ,975 30x18x32 30s $15,393 V1 2 CFW700A3P6T4DBN1 CFDB x13x5 30s $1,130 V1 3 CFW700A5P0T4DBN1 CFDB ,119 12x16x5 30s $1,511 V1 5 CFW700A7P0T4DBN1 CFDB ,865 19x13x5 30s $1,703 V1 7.5 CFW700A10P0T4DBN1 CFDB ,798 19x16x5 30s $1,892 V1 10 CFW700A13P5T4DBN1 CFDB , x16x5 30s $2,938 V1 10 CFW700B17P0T4DBN1 CFDB , x16x5 30s $2,938 V1 15 CFW700B24P0T4DBN1 CFDB ,595 28x13x10 30s $4,254 V1 20 CFW700B31P0T4DBN1 CFDB ,460 28x13x10 30s $4,254 V1 25 CFW700C38P0T4DBN1 CFDB ,325 28x16x10 30s $4,715 V1 30 CFW700C45P0T4DBN1 CFDB ,190 28x16x10 30s $5,071 V1 40 CFW700C58P5T4DBN1 CFDB ,920 30x18x24 30s $8,858 V1 50/60 CFW700D70P5T4DBN1 CFDB ,380 30x18x24 30s $10,176 V1 75 CFW700D88P0T4DBN1 CFDB ,975 30x18x32 30s $14,625 V1 75 CFW700E105P0T4NBN1C3 CFDB ,975 30x18x32 30s $14,625 V1 100/125 CFW700E142P0T4NBN1C3 CFDB ,625 30x18x32 30s $16,923 V1 150 CFW700E180P0T4NBN1C3 CFDB ,950 30x18x48 30s $18,814 V1 175 CFW700E211P0T4NBN1C3 CFDB ,600 30x18x72 30s $31,678 V1 List Price Multiplier Symbol Note:These are non-stocked items, consult WEG for availability. NEMA 1 Enclosure Brakin time based on cycle of 60 seconds A ASK-4WEG Data is subject chane without notice.

47 CFW11 Variable Frequency Drives WEG's CFW11 uses state-of-the-art technoloy to control motors up to 600HP. Aimed at increasin customers productivity, the CFW11 offers the followin innovations: Applications Standard Features Pumps Fans / Blowers Conveyors Compressors Aitators and Mixers Extruders Grizzly Feeders Centrifues Cranes and Hoists Rollout Tables Presses Saws Options Safety stop in compliance with EN / cateory III** External control feed with 24 Vdc RFI filter in compliance with EN (internal)** DB Resistors available upon request Same prorammin as all other WEG VFD's Plu and play philosophy (connect and use) enables quick and easy installation of accessories and options. USB for microcomputer connection for usin SUPERDRIVE prorammin and monitorin software as well as updatin inverter firmware. Human-Machine Interface (HMI) with backlit raphic display and soft-keys, reatly facilitates inverter prorammin and operation. DC link inductors (symetrically connected to positive and neative DC link terminals) enable compliance with IEC standard requirements reardin harmonics, (no need for external line reactance) Intellient thermal manaement enables full protection of IGBTs, monitorin of heatsink and internal air temperature. Conformal coated circuit boards. 50 C Ambient Automatic control of the heatsink fan with speed sensor (additional protection) and easily detachable from the unit for cleanin and maintenance. Normal Duty and Heavy Duty ratins to adapt optimally to all kinds of loads. Protection with failure and alarm warnins. Motor overload protection in compliance with IEC /UL 508 C. Memory card built into the standard product allows user to create functions without the need to use an external PLC (soft-plc via IEC prorammin software) Guided start-up simplifies initial user prorammin. Real time clock with time and date stamped fault lo. TRACE / SCOPE function to assist with the start-up and system dianostics. SuperDrive G2 compatible CFW11 ** Factory ordered Mountin Options Data is subject to chane without notice. WEG Automation - Products and Solutions A-47

48 CFW11 Variable Frequency Drives 1.5 to 600 HP Codin 1. CFW T O 6 N1 7 8 Z 1. CFW11 series 2. Frame Size: = A, B, C, D or E 0006 = 6 Amps 0024 = 24Amps 0242 = 242Amps 0601 = 601 Amps 3. Number of Phase: B = Sinle phase or Three phase S = Sinle phase T = Three Phase 4. Input Voltae: 2 = VAC 4 = VAC 5. Options: S = Standard O = An option function built-in (Ex. ON1 - NEMA1 included) 6. Enclosure: N1 = NEMA 1 CFW11 7. Options: Blank = Standard DB = Dynamic Brakin 8. End of Code: Z A ASK-4WEG Data is subject to chane without notice.

49 Variable Frequency Drives CFW11 Technical Features Built-in DC link Reactor Allows the VSD to be installed in any network (there is no minimum impedance restriction). Typical power factor (PF) for rated condition: 0.94 for models with three-phase supply 0.70 for models with sinle-phase supply Displacement Power factor > 0,98 Meets the standard, related to low order current harmonics in the network. No need for external line reactor Intellient Thermal Manaement Monitorin of the heatsink and internal air temperatures of the electronic boards provide total protection of the IGBTs and the CFW-11 as a whole. The heatsink fan is turned on and off automatically, dependin on the temperature of the power modules. The speed and the number of hours of operation of the fan are monitored and indicated in correspondin parameters. Alarm or fault messaes are enerated related to these variables. The fan is easily removed for cleanin or replacement. Common Bus available Usually used in multi-motor systems, common DC bus confuration is a ood solution for enery savins. In this confuration, individual VSD rectifer brides are replaced with a common input rectifer unit.each VSD is then directly fed from the DC bus to its DC link terminals. This solution allows the enery in the DC bus to be shared amon the VSDs connected to it, thus optimizin the power consumption in the system. The standard CFW-11 can be connected to a DC bus system. (When required the factory should be consulted for further details). Reenerative front ends are also available. Note: An extra pre-chare circuit must be added to each of the VSDs. Functions Multi-speed: up to 8 pre-prorammed speeds. PID reulator: automatic control of level, pressure, flow, weiht, etc. Ride-Throuh: operation durin momentary Loss of the power supply. Skip Frequency: rejection of critical or resonant speeds. S Ramp: smooth acceleration / deceleration. All CFW-11 models from size A to D have optionally brakin IGBT in as standard; CFW-11 size E the brakin IGBT is optional built-in; CFW-11 sizes F and G, Breakin IGBT is optionally with the external DBW module; CFW-11 can monitor the temperature probes of the motor (PTC, PT100 KTY84), providin thermal protection to the motor (optional accessory is necessary); Operatin air temperature up to 50º C (122º F) for sizes A to D, and up to 45º C (113º F) for size E, 45º C (113º F) for sizes F and G up to 601A, 40º C (104º F) for size G with 720A; Motor overload protection accordin to IEC and UL 508 C CFW11 Data is subject to chane without notice. WEG Automation - Products and Solutions A-49

50 CFW10 Variable Frequency Drives CFW11 Drive Ratins Normal Duty (ND) Cycle: 110% for 60 seconds every 10 minutes 150% for 3 seconds every 10 minutes Heavy Duty (HD) Cycle: 150% for 60 seconds every 10 minutes 200% for 3 seconds every 10 minutes CFW08 CFW09 Sizin the drive The correct way to select a VSD is to match its output current with the motor rated current. However, the tables in this catalo also present the expected motor horsepower for each VSD model. Use the motor power ratins only as a uide. Motor rated currents may vary with speed and manufacturer. IEC motor powers are based on WEG 4-pole motors, NEMA motor powers are based on NEC table Frame A Frame B Frame C Frame D Frame E Frame F Frame G 1) 2) 3) CFW11 Notes: 1) Half controlled bride rectiifer for sizes F and G; 2) Standard for sizes A to D; 3) Standard RFI filter for sizes E, F and G; Please refer to the user manual for more information. A ASK-4WEG Data is subject chane without notice.

51 Variable Frequency Drives CFW11 Plu and Play The CFW11 inverter incorporates Plu and Play technoloy, automatically reconizin and confiurin accessories and options used, enablin easy installation and safe operation while eliminatin manual confiuration. Accessories Name Description Slot IOA-01 IOA Module for CFW11: 1 analo input (AI4-14 bits, voltae or current); 2 diital inputs; 2 analo outputs (AO3 and AO4-14 bits, voltae or 1 current); 2 diital outputs (open-collector). All analo input and output are alvanic isolated. IOB-01 IOB Module for CFW11: 2 isolated analo inputs (AI3 and AI4-12 bits, voltae or current); 2 diital inputs; Provides Galvanic Isolation for AO1 and AO2-11 bits, voltae or current); 2 diital outputs (open-collector). All analo inputs and outputs are alvanically isolated. 1 IOC-01 (*) 8 diital inputs and 4 relays 1 IOC-02 8 diital inputs and 8 diital outputs 1 IOE-01 (*) 6 - PT100 or KTY 84 - thermistor inputs 1 ENC-01 ENC-02 RS Interface for incremental encoder 5 to 12Vdc, 100kHz (1) with repeater Interface for incremental encoder 5 to 12Vdc, 100kHz(1) Interface for RS-485 serial communication (modbus) RS Interface for RS-232C serial communication 3 CAN/RS CAN interface (CANopen, DeviceNet); RS CAN-01 CAN interface (CANopen, DeviceNet) 3 PROFIBUS DP-01 (*) Profibus DP interface 3 PLC functions; IEC prorammin; electronic ear box 9 diital inputs; 3 relay outputs; 3 diital outputs PLC11-01 (*) 14-bit analo input; 2 analo outputs with 14-bit 1, 2 resolution and 3 2 encoder interfaces; RS-485 MODBUS-RTU; CAN (CANopen, DeviceNet, CANopen master/slave) PROFIBUS DP-05* Profibus DP interface (Anybus) 4 Devicenet-05* Devicenet 4 interface (Anybus) 4 EtherNet IP-05 (*) Ethernet IP interface (Anybus) 4 HMID - 01 Blind cover for slot HMI - RHMIF - 01 Frame for remote HMI - KN1A - 01 Conduit kit for size A - KN1B - 01 Conduit kit for size B - KN1C - 01 Conduit kit for size C - Note: * Anybus card oes in slot 4 and allows the user to combine PLC11 board with Profibus DP-05, Devicenet-05 or Ethernet IP CFW11 Data is subject to chane without notice. WEG Automation - Products and Solutions A-51

52 Variable Frequency Drives CFW11 Superdrive Prorammin Software Prorammin software for PC (USB connection), Windows environment for setpoint, command and monitorin of CFW11 inverters. Human/Machine Interface Left soft key: function defined by the text in the display Riht soft key: function defined by the text in the display. Monitorin Modes CFW11 A ASK-4WEG Data is subject chane without notice.

53 Variable Frequency Drives CFW11 (NEMA1 / Frame size A E IP20 Frame Size F and G) Motor Volts 230V 480V Normal Duty VT - 110% / 1min ND HP ND Amps Heavy Duty CT - 150% / 1min HD HP HD Amps CATALOG NUMBER Frame Size Enclosure DB DIMENSIONS H x W x D App. Shp. Wt. (lbs.) INPUT POWER SUPPLY: SINGLE OR THREE PHASE V CFW110006B2ON1Z A NEMA 1 YES x 5.71 x $1,644 V CFW110007B2ON1Z A NEMA x 5.71 x $1,716 V1 INPUT POWER SUPPLY: SINGLE PHASE V CFW110010S2ON1Z A NEMA 1 YES x 5.71 x $1,812 V1 INPUT POWER SUPPLY: THREE PHASE V CFW110007T2ON1Z A NEMA 1 YES x 5.71 x $1,620 V CFW110010T2ON1Z A NEMA x 5.71 x $1,692 V CFW110013T2ON1Z A NEMA x 5.71 x $1,728 V CFW110016T2ON1Z A NEMA x 5.71 x $1,850 V CFW110024T2ON1Z B NEMA x 7.45 x $2,424 V CFW110028T2ON1Z B NEMA x 7.45 x $2,641 V CFW110033T2ON1Z B NEMA x 7.45 x $3,190 V CFW110045T2ON1Z C NEMA x 8.66 x $3,641 V CFW110054T2ON1Z C NEMA x 8.66 x $4,400 V CFW110070T2ON1Z C NEMA x 8.66 x $6,600 V CFW110086T2ON1Z D NEMA x x $7,222 V CFW110105T2ON1Z D NEMA x x $9,000 V CFW110142T2ON1Z E NEMA 1 NO 26.6 x 13.2 x $11,649 V CFW110180T2ON1Z E NEMA x 13.2 x $15,125 V CFW110211T2ON1Z E NEMA x 13.2 x $21,560 V CFW110142T2ON1DBZ E NEMA 1 YES 26.6 x 13.2 x $12,720 V CFW110180T2ON1DBZ E NEMA x 13.2 x $17,555 V CFW110211T2ON1DBZ E NEMA x 13.2 x $24,380 V1 INPUT POWER SUPPLY: THREE PHASE V CFW110003T4ON1Z A NEMA 1 YES x 5.71 x $1,616 V CFW110005T4ON1Z A NEMA x 5.71 x $1,650 V CFW110007T4ON1Z A NEMA x 5.71 x $1,712 V CFW110010T4ON1Z A NEMA x 5.71 x $1,969 V CFW110013T4ON1Z A NEMA x 5.71 x $2,068 V CFW110017T4ON1Z B NEMA x 7.45 x $2,530 V CFW110024T4ON1Z B NEMA x 7.45 x $2,992 V CFW110031T4ON1Z B NEMA x 7.45 x $3,873 V CFW110038T4ON1Z C NEMA x 8.66 x $4,300 V CFW110045T4ON1Z C NEMA x 8.66 x $5,400 V CFW110058T4ON1Z C NEMA x 8.66 x $6,633 V1 50/ CFW110070T4ON1Z D NEMA x x $7,500 V CFW110088T4ON1Z D NEMA x x $8,900 V CFW110105T4ON1Z E NEMA 1 NO 26.6 x 13.2 x $10,650 V1 100/ CFW110142T4ON1Z E NEMA x 13.2 x $12,500 V CFW110180T4ON1Z E NEMA x 13.2 x $17,500 V CFW110211T4ON1Z E NEMA x 13.2 x $21,000 V CFW110105T4ON1DBZ E NEMA 1 YES 26.6 x 13.2 x $13,600 V1 100/ CFW110142T4ON1DBZ E NEMA x 13.2 x $15,900 V CFW110180T4ON1DBZ E NEMA x 13.2 x $23,115 V CFW110211T4ON1DBZ E NEMA x 13.2 x $27,020 V CFW110242T4SZ F IP20 NO 48.6 x 16.9 x $23,000 V CFW110312T4SZ F IP x 16.9 x $29,366 V CFW110370T4SZ F IP x 16.9 x $31,314 V CFW110477T4SZ F IP x 16.9 x $41,027 V CFW110515T4SZ G IP20 NO 50 x 21.1 x $43,970 V CFW110601T4SZ G IP20 50 x 21.1 x $50,088 V CFW110720T4SZ G IP20 50 x 21.1 x $59,330 V1 Notes: HP ratin based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. HD current ratin with 140% O/L List Price Multiplier Symbol CFW11 Data is subject to chane without notice. WEG Automation - Products and Solutions A-53

54 Variable Frequency Drives CFW11 Options and Accessories CFW11 Encoder Modules I/O Exp Modules Communication Modules PLC & Flash Memory Modules Keypad Accessories and Remote Keypad Cables Conduit Kit Shieldin Kit DESCRIPTION CATALOG NUMBER List Price Multiplier Symbol IOA Module for CFW11: 1 analo input (AI4-14 bits, voltae or current); 2 diital inputs; 2 analo outputs (AO3 and AO4-14 bits, voltae or current); 2 diital outputs (open-collector). IOA-01 $1,100 V1 All analo input and output are alvanic isolated. IOB Module for CFW11: 2 isolated analo inputs (AI3 and AI4-12 bits, voltae or current); 2 diital inputs; Provides Galvanic Isolation for AO1 and AO2-11 bits, voltae or current); 2 IOB-01 $600 V1 diital outputs (open-collector). All analo inputs and outputs are alvanically isolated. IOC-01: Module for SoftPLC : 8 x Isolated Diital Inputs; 4 x Relay output (240V/1A) IOC-01 $447 V1 IOC-02: Module for SoftPLC : 8 x Isolated Diital Inputs; 8 x open collector diital outputs IOC-02 $411 V1 Incremental encoder module, 5 to 12 VDC at 100 khz, with encoder sinal repeater ENC-01 $500 V1 Incremental encoder module, 5 to 12 VDC at 100 khz, without encoder sinal repeater ENC-02 $430 V1 RS-485 serial communication module (Modbus-RTU) RS $240 V1 RS-232C serial communication module (Modbus-RTU) RS $180 V1 RS232C serial commuication module with DIP-switches for microcontroller s flash memory prorammin RS $180 V1 CAN and RS-485 communication module (CANopen / Modbus / DeviceNet) CAN/RS $480 V1 CAN interface module (CANopen / DeviceNet) (Same as CFW700) CAN-01 $410 V1 Profibus DP interface module - Anybus card* PROFDP-05 $1,100 V1 DeviceNet interface module - Anybus card* DEVICENET-05 $1,100 V1 Ethernet/IP interface module - Anybus card* ETHERNET/IP-05 $1,100 V1 RS-232 serial communication module (Modbus-RTU) RS $290 V1 RS-485 serial communication module (Modbus-RTU) RS $360 V1 PLC functions; Ladder prorammin; electronic ear box; 9 diital inputs; 3 dry-contact diital outputs; 3 open-collector diital outputs; 1 analo input (14 bits); 2 analo outputs (14 bits); 2 encoder interfaces; RS-485 Mobus-RTU interface; CAN interface (CANopen, PLC11-01 $1,876 V1 CANopen master/slave) Flash Memory Module for CFW11 MMF-01 $71 V1 CFW11 keypad HMI-01 $320 V1 Frame for keypad remote assembly RHMIF-01 $69 V1 Blank cover for keypad slot HMID-01 $54 V1 1m (3.3ft) remote keypad cable IHM-CAB-RS-1M $54 V1 2m (6.6ft) remote keypad cable IHM-CAB-RS-2M $60 V1 3m (10ft) remote keypad cable IHM-CAB-RS-3M $66 V1 5m (16ft) remote keypad cable IHM-CAB-RS-5M $75 V1 7.5m (25ft) remote keypad cable IHM-CAB-RS-7.5M $90 V1 10m (33ft) remote keypad cable IHM-CAB-RS-10M $102 V1 Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends (22mm) replaces CFW-REM CSW-SP3PBS $460 Z5 Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and leends (30mm) replaces CFW-REM CSW30-SP3PBS $535 Z5 Conduit Kit for frame size A KN1A-01 $69 V1 Conduit Kit for frame size B KN1B-01 $82 V1 Conduit Kit for frame size C KN1C-01 $94 V1 IP21 Kit for frame size D KIP21D-01 $100 V1 Power Cables Shieldin Kit for frame size A PCSA-01 $40 V1 Power Cables Shieldin Kit for frame size B PCSB-01 $42 V1 Power Cables Shieldin Kit for frame size C PCSC-01 $45 V1 Power cables shieldin kit for frame size D PCSD-01 $56 V1 Power cables shieldin kit for frame size E PCSE-01 $76 V1 External Dynamic Brakin Module (frame F & G) DBW03-CFW11 F & G $6,822 V1 *Anybus card oes in slot 4 and allows the user to combine the PLC11 board with DeviceNet, Profibus, or Enternet/IP. A ASK-4WEG Data is subject chane without notice.

55 Variable Frequency Drives CFW11 Accessories and Options Blank cover HMID - 01 Blank cover to replace the standard VSD keypad when not used. Remote keypad frame RHMIF-01 Frame for Keypad installation on panel door or machine console. Deree of protection IP56. CFW11 - Dynamic Brakin module DBW03-CFW11 F & G The DBW03 external brake module allows for enery dissipation durin reenerative cycles or when runnin hih inertia loads requirin short deceleration times. Resistors priced seperately (see pae A-57 and A-58) This breakin unit was developed especially for VSDs that do not have a built-in brake chopper, e.. CFW11 frame sizes F, G and Modular Drive. Its voltae ranes from 380 to 480V and its main function is to limit DC bus voltae in order to avoid trippin the VSD due to overvoltae caused by applications where breakin is required. Maximum Output Current: 378Amps Minimum Resistor: 1.8Ohms External power supply for fans: 220Vca +/- 5%@250mA Thermally Protected Safety stop in accordance with EN-954-1, cateory III With the activation of the safety stop function, the ate pulses to the IGBTs are disabled. With no voltae available at VSD output, no torque is applied to the motor. This ensures that the motor remains safely stopped. Enclosures Standard Accessory Composition KN1A-01 Conduit kit frame size A KN1B-01 Conduit kit frame size B KN1C-01 Conduit kit frame size C NEMA Type 1 KN1E-01 Top cover size E models 105 and 142 KN1E-02 Top Cover + Conduit kit size E models 180 and 211 KN1F-01 Conduit kit for frame size KN1G-01 Conduit kit for frame size G KIP21A-01 Top cover kit frame size A IEC KIP21B-01 Top cover kit frame size B KIP21C-01 Top cover kit frame size C KIP21D-01 Top cover kit frame size D ( X ) Standard ( - ) N/A CFW11 Frame Sizes Standards Ratins A B C D E F & G IEC IP X X X IP21 X X X KIP21D NEMA TYPE 1 KN1A-01 KN1B-01 KN1C-01 X KN1E-01 / KN1E-02 KN1F-01 / KN1G-01 Note: In the KN1X-01 Conduit kit (frame sizes A,B and C) power cable shieldin is also provided. Kits KN1F-01 and KN1G-01 are under UL certiༀcation process Data is subject to chane without notice. WEG Automation - Products and Solutions A-55

56 Variable Frequency Drives CFW11 USB Connection SuperDrive Trace Function Trace function is used to reister CFW-11 variables (like current, voltae, speed, etc.) when a iven event occurs in the system (e..: alarm / fault, overload, overvoltae, etc.). When a iven event takes place the trier function activates data storae process. The stored variables can be displayed in the form of raphs by usin the SuperDrive G2 software. Trace function simulates a 4-channel oscilloscope. It is a very powerful tool to be used on start-up procedures of systems and on diaoses of faults. Example of raph display screen Trace function confiuration in the SuperDrive G2 WEG SoftPLC WEG SoftPLC is a resource that provides PLC features to the CFW-11 without the addition of any accessories. It provides flexibility to the product, allowin the user to create his/her own application software (user s proram). The SoftPLC main features are: Ladder lanuae prorammin usin WLP software Access to all VSD parameters and I/Os Confiurable PLC, mathematical and control blocks Application software download, upload and online monitorin via USB connection Storae of user application in the CFW-11 Flash Memory Module (see below) Memory capacity of 15kB for storae of a user application Simple and practical prorammin environment 49 User parameter settins that can be individually prorammed allowin tas, units, minimum and maximum values, number of decimal diits and other characteristics to be chaned. CFW11 Flash Memory Module It stores CFW-11 parameters. It ensures that the prorammin will not be lost as there is a backup of the parameters. It permits the transfer of parameters stored in the flash Memory Module to the CFW-11 and vice versa. It is a useful function for machine manufacturers or in processes where parameter settins are repeated (Copy Function). It stores the application software enerated by the SoftPLC function. The Flash Memory Module comes as standard on CFW11 series. A ASK-4WEG Data is subject chane without notice.

57 Variable Frequency Drives CFW11 DB Resistors 100% Brakin Torque - 20% Duty Cycle - NEMA 1 Enclosure Motor Volts Motor HP For Use with CFW11 Model Number: Catalo Number Rated OHM WATTS Dimensions (in.) W x D x H Max. Brakin Time List Price Multiplier Symbol 230V 480V 1.5 CFW110006B2ONIZ CFDB x5x5 12s $520 V1 2 CFW11007B2ON1Z CFDB x7x5 12s $749 V1 2 CFW110007T2ON1Z CFDB x7x5 12s $749 V1 3 CFW110010S2ON1Z CFDB x7x5 12s $749 V1 3 CFW110010T2ON1Z CFDB x7x5 12s $749 V1 5 CFW110013T2ON1Z CFDB x10x5 12s $941 V1 5 CFW110016T2ON1Z CFDB x10x5 12s $941 V1 7.5 CFW110024T2ON1Z CFDB ,119 12x13x5 12s $1,130 V1 10 CFW11028T2ON1Z CFDB ,492 12x16x5 12s $1,322 V1 10 CFW110033T2ON1Z CFDB ,492 12x16x5 12s $1,322 V1 15 CFW110045T2ON1Z CFDB ,238 19x10x5 12s $1,644 V1 20 CFW110054T2ON1Z CFDB ,984 19x10x5 12s $1,644 V1 25 CFW11070T2ON1Z CFDB ,730 19x13x5 12s $1,997 V1 30 CFW110086T2ON1Z CFDB , x13x5 12s $2,588 V1 40 CFW110105T2ON1Z CFDB , x16x5 12s $3,269 V1 50 CFW110142T2ON1Z CFDB ,460 28x10x10 12s $3,820 V1 60 CFW110180T2ON1Z CFDB ,952 28x10x10 12s $3,820 V1 75 CFW110211T2ON1Z CFDB ,190 28x13x10 12s $5,622 V1 2 CFW110003T4ON1Z CFDB x7x5 12s $749 V1 3 CFW110005T4ON1Z CFDB x7x5 12s $749 V1 5 CFW110007T4ON1Z CFDB x10x5 12s $941 V1 7.5 CFW110010T4ON1Z CFDB ,119 12x13x5 12s $1,130 V1 10 CFW110013T4ON1Z CFDB ,492 12x16x5 12s $1,322 V1 10 CFW110017T4ON1Z CFDB ,492 12x16x5 12s $1,322 V1 15 CFW110024T4ON1Z CFDB ,238 19x13x5 12s $1,820 V1 20 CFW110031T4ON1Z CFDB ,984 19x16x5 12s $2,201 V1 25 CFW110038T4ON1Z CFDB , x13x5 12s $2,511 V1 30 CFW110045T4ON1Z CFDB , x13x5 12s $2,511 V1 40 CFW110058T4ON1Z CFDB , x16x5 12s $2,938 V1 50/60 CFW110070T4ON1Z CFDB ,952 28x13x10 12s $4,328 V1 75 CFW110088T4ON1Z CFDB ,190 28x16x10 12s $5,659 V1 75 CFW110105T4ON1Z CFDB ,190 28x16x10 12s $5,659 V1 100/125 CFW110142T4ON1Z CFDB ,650 30x18x24 12s $9,560 V1 150 CFW110180T4ON1Z CFDB ,380 30x18x24 12s $11,854 V1 175 CFW110211T4ON1Z CFDB ,840 30x18x24 12s $11,854 V1 200 CFW110242T4ON1Z CFDB ,840 30x18x32 12s $11,854 V1 250 CFW110312T4ON1Z CFDB ,300 30x18x32 12s $12,533 V1 300 CFW110370T4ON1Z CFDB ,760 30x18x32 12s $15,393 V1 350 CFW110477T4ON1Z CFDB ,220 30x18x48 12s $21,406 V1 400 CFW110515T4ON1Z CFDB ,680 30x18x48 12s $22,167 V1 500 CFW110601T4ON1Z CFDB ,600 30x18x64 12s $32,077 V1 600 CFW110720T4ON1Z Consult with WEG CFW11 Notes: These are non-stocked items, consult WEG for availability. NEMA 1 Enclosure Maximum Brakin time based on cycle of 60 seconds. Data is subject to chane without notice. WEG Automation - Products and Solutions A-57

58 Variable Frequency Drives CFW11 DB Resistors 100% Brakin Torque - 50% Duty Cycle NEMA 1 Enclosure Motor Volts Motor HP For Use with CFW11 Model Number: Catalo Number Rated OHM WATTS Dimensions (in.) W x D x H Brakin time per minute List Price Multiplier Symbol CFW11 230V 480V 1.5 CFW110006B2ONIZ CFDB x10x5 30s $941 V1 2 CFW11007B2ON1Z CFDB x10x5 30s $941 V1 2 CFW110007T2ON1Z CFDB x10x5 30s $941 V1 3 CFW110010S2ON1Z CFDB ,119 12x10x5 30s $1,130 V1 3 CFW110010T2ON1Z CFDB ,119 12x10x5 30s $1,130 V1 5 CFW110013T2ON1Z CFDB ,865 19x13x5 30s $1,820 V1 5 CFW110016T2ON1Z CFDB ,865 19x13x5 30s $1,820 V1 7.5 CFW110024T2ON1Z CFDB , x13x5 30s $2,511 V1 10 CFW11028T2ON1Z CFDB , x13x5 30s $2,511 V1 10 CFW110033T2ON1Z CFDB , x13x5 30s $2,511 V1 15 CFW110045T2ON1Z CFDB , x16x5 30s $2,938 V1 20 CFW110054T2ON1Z CFDB ,460 28x13x10 30s $4,663 V1 25 CFW11070T2ON1Z CFDB ,325 28x13x10 30s $4,663 V1 30 CFW110086T2ON1Z CFDB ,190 28x16x11 30s $5,254 V1 40 CFW110105T2ON1Z CFDB , x16x5 30s $6,762 V1 50 CFW110142T2ON1Z CFDB ,650 30x18x24 30s $10,325 V1 60 CFW110180T2ON1Z CFDB ,380 30x18x24 30s $10,325 V1 75 CFW110211T2ON1Z CFDB ,975 30x18x32 30s $15,393 V1 2 CFW110003T4ON1Z CFDB x13x5 30s $1,130 V1 3 CFW110005T4ON1Z CFDB ,119 12x16x5 30s $1,511 V1 5 CFW110007T4ON1Z CFDB ,865 19x13x5 30s $1,703 V1 7.5 CFW110010T4ON1Z CFDB ,798 19x16x5 30s $1,892 V1 10 CFW110013T4ON1Z CFDB , x16x5 30s $2,938 V1 10 CFW110017T4ON1Z CFDB , x16x5 30s $2,938 V1 15 CFW110024T4ON1Z CFDB ,595 28x13x10 30s $4,254 V1 20 CFW110031T4ON1Z CFDB ,460 28x13x10 30s $4,254 V1 25 CFW110038T4ON1Z CFDB ,325 28x16x10 30s $4,715 V1 30 CFW110045T4ON1Z CFDB ,190 28x16x10 30s $5,071 V1 40 CFW110058T4ON1Z CFDB ,920 30x18x24 30s $8,858 V1 50/60 CFW110070T4ON1Z CFDB ,380 30x18x24 30s $10,176 V1 75 CFW110088T4ON1Z CFDB ,975 30x18x32 30s $14,625 V1 75 CFW110105T4ON1Z CFDB ,975 30x18x32 30s $14,625 V1 100/125 CFW110142T4ON1Z CFDB ,625 30x18x32 30s $16,923 V1 150 CFW110180T4ON1Z CFDB ,950 30x18x48 30s $18,814 V1 175 CFW110211T4ON1Z CFDB ,600 30x18x72 30s $31,678 V1 200 CFW110242T4ON1Z CFDB ,600 30x18x72 30s $31,678 V1 250 CFW110312T4ON1Z CFDB ,250 30x18x72 30s $31,678 V1 300 CFW110370T4ON1Z CFDB ,900 (2)30x18x56 30s $54,028 V1 350 CFW110477T4ON1Z CFDB ,550 (2)30x18x56 30s $54,028 V1 400 CFW110515T4ON1Z CFDB ,200 (2)30x18x56 30s $73,288 V1 500 CFW110601T4ON1Z CFDB ,500 (2)30x18x56 30s $73,288 V1 600 CFW110720T4ON1Z Consult with WEG Notes: These are non-stocked items, consult WEG for availability. NEMA 1 Enclosure Brakin time based on cycle of 60 seconds. A ASK-4WEG Data is subject chane without notice.

59 Variable Frequency Drives CFW11 Technical Data Supply Supply frequency Output frequency V: +10%...-15% of rated voltae V: +10%...-15% of rated voltae 50/60Hz, +/-2Hz 0 to 300Hz Vector with encoder Vector sensorless Types of control V V W: voltae vector V/F (scalar) ºC Ambient temperature up to 60º with output current reduction (2%/ºC above 50ºC) Humidity 5 to 90% without condensation 0 to 1000m Altitude Up to 4000m without current reduction (1%n for each 100m above 1000m) Dynamic brakin up to 75HP built in Brakin methods Dynamic brakin option: 100HP and up DC brakin Efficiency Greater than 97% NEMA for models A throuh E Deree of protection IP20 finer safe for models F & G Possibility of flane mountin Available in all standard models, rear part of heatsink with IP54 deree of protection Normal Duty: 110%, 60s Overload Heavy Duty: 150%, 60s Analo inputs 2 differential, resolution 11 bits + sinal, 0 to +/- 10V/(0)4 to 20mA Analo outputs 2 non-isolated, resolution 10 bits, 0 to 10V/(0)4 to 20mA Diital inputs 8 optoisolated, bi-directional, 24Vdc Relay outputs 1 reverse contact output (NO/NC), 240Vac 30Vdc 0.75 A Transistor output Transistor output / 4 isolated output 24Vdc & 100mA PTC/PT100/KTY84, use 1 analo output prorammed for contstant current + 1 analo input prorammed Motor thermistor for voltae Supply + 24Vdc available for user 24Vdc +\-20%, 500mA IEC Semiconductor convertors UL508C Safety for power conversion equipment EN Electronic equipment for use in power installations EN General requirements adjustable speed electrical power drive systems Certifications EN Safety requirements adjustable speed electrical power drive systems EN EMC product standard includin specific test methods adjustable speed electrical power drive systems EN Electronic equipment of machines RoHS and WEEE Guidelines CFW11 Data is subject to chane without notice. WEG Automation - Products and Solutions A-59

60 Variable Frequency Drives Communication Options & Superdrive Profibus, Modbus and Device Net Description Catalo Number List Price SUPERDRIVE Software + USB Cable SUPERDRIVE+USB $301 V1 Multiplier Symbol SUPERDRIVE KIT - CFW08 (KCS-CFW08 - RS232 PC Cable + CD Software) KSD-CFW08 $97 V1 SUPERDRIVE KIT - CFW09 (KCS-CFW09 - RS232 PC Cable + CD Software) KSD-CFW09 $156 V1 SUPERDRIVE G2 KIT - SSW06 KSDG2-SSW06 $62 V1 SUPERDRIVE G2 KIT - SSW07 (KRS-232-SSW07 + CAB-RS-3 + CD Software) KSDG2-SSW07 $225 V1 RS-232/485 Converter (mounted externally) MIW-02 $221 V1 RS-485 Kit for PC $900 V1 Communication Options The table below shows the hardware options required to provide WEG VFD s and Soft Starters with different serial communications or networkin capabilities. RS-232 RS-485 Profibus-DP DeviceNet Modbus-RTU CFW08 KCS-CFW08 KCS-CFW08 MIW-02 KCS-CFW08 MIW-02 MFW-01/PD CFW09 See CFW09 accessories CFW11 See CFW11 accessories SSW03 Standard MIW-02 MIW-02 MFW-01/PD SSW04 Standard MIW-02 MIW-02 MFW-01/PD SSW05 Standard MIW-02 MIW-02 MFW-01/PD KCS-CFW08 MIW-02 MFW-01/DN MIW-02 MFW-01/DN MIW-02 MFW-01/DN MIW-02 MFW-01/DN SSW06 Standard KRS-485-SSW06 KFB-PD-SSW06 KFB-DN-SSW06 SSW07 "RS-485 Kit for PC" is required when SUPERDRIVE communicates with a multi drive RS-485 network. It is composed of a RS-232/RS-485 converter and a cable to connect to PC. See SSW07 Accessories KCS-CFW08 MIW-02 MIW-02 MFW- 01/MR MIW-02 MFW- 01/MR MIW-02 MFW- 01/MR MIW-02 MFW- 01/MR CFW11 Superdrive WEG Superdrive is a windows based software proram that allows serial (RS or RS - 485) communication between a PC and all WEG Soft Starters and Variable Frequency Drives. Superdrive is an excellent prorammin, documentation, and troubleshootin tool for WEG Soft Starters and VFD s. Superdrive is available for free download at Hardware accessories may be required dependin on the Soft Starter or VFD line. Standard Features Online and Offline Soft Starter or VFD prorammin Command and Monitorin Parameter set storae in a computer file format A ASK-4WEG Data is subject chane without notice.

61 EDP11 Enclosed Drive Panel CFW10 EDP11 The Enclosed Drive Panel is an industrial eneral purpose AC motor control and protection packae. It is desined for simple and quick installation and start-up, requirin only input power and output motor connections. There are two enclosure variants available such as NEMA 12 ventilated and NEMA 3R for Outdoor Installations. The Enclosed Drive Panel is built to complement the ruedness and reliability of WEG motors, providin a complete, simple, and cost effective AC motor control, monitor and protection solution. NEMA 12 Version CFW11 Drive Indoor Rated Wall mounted Circuit Breaker with throuh door handle CFW11 VFD (Dual DC choke built-in) Fused 480V/120V CPT Internal Fan Heat sink throuh the back Motor Terminal Block Door mounted keypad Start / Stop Pushbuttons Run/Fault Pilot Lihts Keypad cover - same as GPH2 Drive and controls mounted in NEMA 4 section of panel; heat sink is external and rated NEMA 12 NEMA 3R Version NEMA 12 features plus: Outdoor Rated Wall mounted Weather kit (rain/sun/snow shield) Panel space heater + thermostat Lihtnin arrestor Service entrance rated 3-Contactor Bypass Option NEMA 12 or NEMA 3R version AC3 full rated by-pass contactor Drive input and output contactors Motor overload relay E-Stop Mushroom style pushbutton Enclosure size to be determined Options available to be added to any of the versions above HOA = Hand-OFF-Auto POT = Potentiomenter for speed reference of PID setpoint TB = Auxiliary control terminal block for remote command Data is subject to chane without notice. WEG Automation - Products and Solutions A-61

62 Variable Frequency Drives - Enclosed Drive Panel EDP11S - Flane Mount CFW10 EDP11 Volatae 230 VAC Normal Duty/VT- Heavy Duty/CT (0/L:110%/1 min) (0/L:110%/1 min) NEMA 12 Wall Mount Indoor Rated NEMA 12 NEMA 12 LIST NEMA 3R Wall Mount Outdoor Rated NEMA 3R NEMA 3R LIST Wall Mount Approx. Weiht Without Bypass HP A HP A Non-Ventilated Size $$$ Non-Ventilated Size $$$ LBS EDP11S007DN12 $6,690 EDP11S007DN3R $8, EDP11S010DN12 $6,756 EDP11S010DN3R $8, B B EDP11S013DN12 $6,855 EDP11S013DN3R $8, EDP11S016DN12 $7,123 EDP11S016DN3R $8, EDP11S024DN12 $7,664 EDP11S024DN3R $9, EDP11S028DN12 B $8,408 EDP11S028DN3R B $10, EDP11S033DN12 $9,108 EDP11S033DN3R $10, EDP11S045DN12 $10,214 EDP11S045DN3R $12, EDP11S054DN12 C $11,491 EDP11S054DN3R C $13, EDP11S070DN12 $12,162 EDP11S070DN3R $14, EDP11S086DN12 $14,321 EDP11S086DN3R $16, D D EDP11S105DN12 $17,164 EDP11S105DN3R $19, EDP11S142DN12 $19,793 EDP11S142DN3R $21, EDP11S180DN12 E $25,116 EDP11S180DN3R E $27, EDP11S211DN12 $28,326 EDP11S211DN3R $30, Volatae 480 VAC Normal Duty/VT- (0/L:110%/1 min) Heavy Duty/CT (0/L:110%/1 min) NEMA 12 Wall Mount Indoor Rated NEMA 12 NEMA 12 LIST NEMA 3R Wall Mount Outdoor Rated NEMA 3R NEMA 3R LIST Wall Mount Approx. Weiht Without Bypass HP A HP A Non-Ventilated Size $$$ Non-Ventilated Size $$$ LBS EDP11S003GN12 $6,510 EDP11S003GN3R $8, EDP11S005GN12 $6,626 EDP11S005GN3R $8, EDP11S007GN12 $6,690 EDP11S007GN3R B $8, EDP11S010GN12 $6,756 EDP11S010GN3R $8, B EDP11S013GN12 $6,855 EDP11S013GN3R $8, EDP11S017GN12 $7,269 EDP11S017GN3R $9, EDP11S024GN12 $7,821 EDP11S024GN3R B $9, EDP11S031GN12 $8,580 EDP11S031GN3R $10, EDP11S038GN12 $9,293 EDP11S038GN3R $11, EDP11S045GN12 C $10,422 EDP11S045GN3R C $12, EDP11S058GN12 $12,026 EDP11S058GN3R $13, / EDP11S070GN12 $12,729 EDP11S070GN3R $14, D D EDP11S088GN12 $14,988 EDP11S088GN3R $16, EDP11S105GN12 $17,964 EDP11S105GN3R $19, / EDP11S142GN12 $20,715 EDP11S142GN3R $22, E E EDP11S180GN12 $26,286 EDP11S180GN3R $27, EDP11S211GN12 $29,645 EDP11S211GN3R $31, EDP11S242GN12 $40,755 EDP11S242GN3R $45, EDP11S312GN12 $45,114 EDP11S312GN3R $50, G G EDP11S370GN12 $47,743 EDP11S370GN3R $52, EDP11S477GN12 $54,585 EDP11S477GN3R $59, EDP11S515GN12 $66,023 EDP11S515GN3R $71,976 1, EDP11S601GN12 H $71,875 EDP11S601GN3R H $77,828 1, EDP11S720GN12 $88,556 EDP11S720GN3R $94,509 1,150 Notes: "HP" ratin based on FLA values from WEG W22, 2 and 4 poles, 480VAC, NEMA Premium motors". Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. VT: Variable Torque CT: Constant Torque, O/L: Overload Panels 200HP and above are ventilated free standin floor mounted enclosures. A ASK-4WEG Data is subject chane without notice.

63 Variable Frequency Drives - Enclosed Drive Panel EDP11S - Flane Mount Options 480 VAC Voltae 230 VAC Volatae Normal Duty CT- 110% / 1min Normal Duty CT- 110% / 1min Heavy Duty CT- 150% / 1min Heavy Duty CT- 150% / 1min NEMA 12 Wall Mount Indoor Rated NEMA 12 Wall Mount Indoor Rated NEMA 12 LIST NEMA 12 LIST NEMA 3R Wall Mount Outdoor Rated NEMA 3R Outdoor Rated NEMA 3R LIST NEMA 3R LIST Adder for 3-Cont. Bypass, Wall Mount Adder for HOA / POT / TB List LIST Size HP A HP A Non-Ventilated $$$ Non-Ventilated $$$ $$$ $$$ EDP11S003GN12* $6,510 EDP11S003GN3R* $8,341 $1,510 $ EDP11S005GN12* $6,626 EDP11S005GN3R* $8,457 $1,510 $ EDP11S007GN12* $6,690 EDP11S007GN3R* $8,521 B $1,510 $ EDP11S010GN12* $6,756 EDP11S010GN3R* $8,587 $1,520 $ EDP11S013GN12* $6,855 EDP11S013GN3R* $8,686 $1,520 $ EDP11S017GN12* $7,269 EDP11S017GN3R* $9,100 $1,598 $ EDP11S024GN12* $7,821 EDP11S024GN3R* $9,652 C $1,792 $ EDP11S031GN12* $8,580 EDP11S031GN3R* $10,411 $1,903 $ EDP11S038GN12* $9,293 EDP11S038GN3R* $11,125 $1,985 $ EDP11S045GN12* $10,422 EDP11S045GN3R* $12,369 D $2,102 $ EDP11S058GN12* $12,026 EDP11S058GN3R* $13,673 $2,247 $763 50/ EDP11S070GN12* $12,729 EDP11S070GN3R* $14,451 $2,695 $763 E EDP11S088GN12* $14,988 EDP11S088GN3R* $16,653 $2,888 $ EDP11S105GN12* $17,964 EDP11S105GN3R* $19,733 $3,344 $ / EDP11S142GN12* $20,715 EDP11S142GN3R* $22,415 $4,985 $763 F EDP11S180GN12* $26,286 EDP11S180GN3R* $27,847 $5,995 $ EDP11S211GN12* $29,645 EDP11S211GN3R* $31,122 $7,325 $ EDP11S242GN12* $40,755 EDP11S242GN3R* $45,693 $12,579 $ EDP11S312GN12* $45,114 EDP11S312GN3R* $50,053 $14,143 $858 J EDP11S370GN12* $47,743 EDP11S370GN3R* $52,682 $14,403 $ EDP11S477GN12* $54,585 EDP11S477GN3R* $59,523 $22,033 $ EDP11S515GN12* $66,023 EDP11S515GN3R* $71,976 Adder for 3-Cont. Bypass, Wall Mount Adder for HOA / POT / TB List LIST Size HP A HP A Non-Ventilated $$$ Non-Ventilated $$$ $$$ $$$ EDP11S007DN12* $6,690 EDP11S007DN3R* $8,521 $1,510 $ EDP11S010DN12* $6,756 EDP11S010DN3R* $8,587 $1,520 $763 B EDP11S013DN12* $6,855 EDP11S013DN3R* $8,686 $1,520 $ EDP11S016DN12* $7,123 EDP11S016DN3R* $8,918 $1,520 $ EDP11S024DN12* $7,664 EDP11S024DN3R* $9,459 $1,598 $ EDP11S028DN12* $8,408 EDP11S028DN3R* $10,202 C $1,792 $ EDP11S033DN12* $9,108 EDP11S033DN3R* $10,902 $1,903 $ EDP11S045DN12* $10,214 EDP11S045DN3R* $12,122 $2,102 $ EDP11S054DN12* $11,491 EDP11S054DN3R* $13,400 D $2,247 $ EDP11S070DN12* $12,162 EDP11S070DN3R* $14,162 $2,695 $ EDP11S086DN12* $14,321 EDP11S086DN3R* $16,320 $2,695 $763 E EDP11S105DN12* $17,164 EDP11S105DN3R* $19,338 $2,888 $ EDP11S142DN12* $19,793 EDP11S142DN3R* $21,967 $4,985 $ EDP11S180DN12* $25,116 EDP11S180DN3R* $27,290 F $5,995 $ EDP11S211DN12* $28,326 EDP11S211DN3R* $30,499 $7,325 $763 $22,033 $ EDP11S601GN12* $71,875 EDP11S601GN3R* $77,828 K $27,572 $ EDP11S720GN12* $88,556 EDP11S720GN3R* $94,509 $31,388 $858 CFW10 EDP11 Notes: "HP" ratin based on FLA values from WEG W22, 2 and 4 poles, 480VAC, NEMA Premium motors". Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. *Part numbers to chane if options added. EX: EDP11S...GN st 1 = 3 CONT BYP, 2nd 1 = HOA / POT / TB adder Data is subject to chane without notice. WEG Automation - Products and Solutions A-63

64 Variable Frequency Drives - Enclosed Drive Panel Dimensions CFW10 EDP11 D D1 Dimensions Frame H W D D1 R3R* R12** B C D E F G H J *For NEMA 3R cabinet **For NEMA 12 cabinet A ASK-4WEG Data is subject chane without notice.

65 Variable Frequency Drives - Enclosed Drive Panel Dimensions EDP11 Frame G Frames H, J, K Dimensions Frame H W D D1 G H J K Data is subject to chane without notice. WEG Automation - Products and Solutions A-65

66 CFW11M Modular Drive New eneration of WEG variable frequency drives for hih power ratins, ranin from 450HP-2500HP to with line voltae from 380V to 690V. CFW11M Applications Pumps Fans / Blowers Conveyors Compressors Aitators and Mixers Extruders Grizzly Feeders Centrifues Cranes and Hoists Rollout Tables Presses Saws Standard Features: CFW11M Circuit Breaker with throuh door handle Line Reactor 6 pulse Rectifier Bride Hih Speed fuses on DC Link CPT Standard Enclosure N12 filtered Other Enclosures available Pre-chare circuit Start/Stop push -button E-stop Graphic keypad All circuit boards conformal coated Optional Features: 12 and 18 pulse availble NEMA 3R NEMA 4 or NEMA 4X - with air conditionin Temperature controllers for RTD sensors A ASK-4WEG Data is subject to chane without notice.

67 Variable Frequency Drive CFW11M Pre-Modular Drives Voltae HP AMPS Rectifier Dimensions Multiplier Product List Price ND HD ND HD Pulses H x W x D Symbol CFW11M0600T4Z 6/ x 55 x 34 $70,404 V CFW11M0760T4Z 6/ x 55 x 34 $93,867 V CFW11M0865T4Z 6/ x 55 x 34 $101,514 V CFW11M0985T4Z 6/ x 55 x 34 $111,015 V CFW11M1140T4Z 6/ x 55 x 34 $132,772 V CFW11M1710T4Z 6/ x 95 x 34 $182,457 V CFW11M2280T4Z 6/ x 110 x 34 $233,163 V CFW11M2850T4Z 6/ x 126 x 34 $281,783 V CFW11M0470T5Z 6/ x 55 x 34 $88,827 V CFW11M0893T5Z 6/ x 55 x 34 $162,206 V CFW11M1340T5Z 6/ x 95 x 34 $219,195 V CFW11M1786T5Z 6/ x 110 x 34 $283,971 V CFW11M2232T5Z 6/ x 126 x 34 $330,727 V CFW11M0427T6Z 6/ x 55 x 34 $89,511 V CFW11M0811T6Z 6/ x 55 x 34 $161,924 V CFW11M1217T6Z 6/ x 95 x 34 $220,669 V CFW11M1622T6Z 6/ x 110 x 34 $283,380 V CFW11M2026T6Z 6/ x 126 x 34 $329,690 V2 Consult factory for individual module pricin v v v CFW11M Variable Frequency Drive CFW11M Power Unit Compact modular drive that can be confiured to the applicable motor power ratins. DC Link (connected to rectifier) Fuse Easy servicin Confiurable up to 5 power units DC supplied by an input rectifier Compact book format (width much smaller than the depth) Rack mounted Power Unit Application example Motor connection Data is subject to chane without notice. WEG Automation - Products and Solutions A-67

68 Variable Frequency Drives CFW11M Dimensions CFW11M A ASK-4WEG Data is subject to chane without notice.

69 SSW05 Soft Starters The WEG SSW05 Soft Starter is a super compact fully diital soft starter with a state-of-the-art DSP controller. Its diital construction provides optimum operation, dianostics capability and full motor protection. Simplicity in set-up and operation is assured since all parameters and set-up selections are made via dip switches and potentiometers. Status LED s alert the user of the operational status of the SSW05. Simplicity, ease of set-up, and the micro size assures quick and easy installation and operation. ssw05 Applications Pumps Fans Blowers Compressors Standard Features V, 50/60Hz input power supply Duty cycle: 300% rated current durin 10 seconds, 4 starts per hour Built-in bypass contacts One diital input for Start/Stop ( Vac) One diital input for Fault Reset ( Vac) One relay output for Run indication (1 Amp - 250V) One relay output for Full Voltae indication (1 Amp - 250V) RS-232 serial port Adjustable acceleration and deceleration ramps (1-20 seconds) For hih inertia loads, see SSW07 product line. Adjustable pedestal voltae (30-80% of line voltae) Protective features: Motor overload, over current and locked rotor, SCR overload, phase loss and phase sequence DIN rail or direct mount Ambient: 32ºF (0ºC) to 131ºF (55ºC), 3300ft (1000m) altitude, 90% non-condensin humidity SuperDrive compatible Optional Features Remote Keypad PC Prorammin Software Data is subject to chane without notice. WEG Automation - Products and Solutions A-69

70 ssw05 SSW05 Soft Starter 3 to 75 HP 1 SSW Codin 3 T E 6 P 7 Z 1. SSW05 series 2. Rated Current 0010 = 10 Amps 0045 = 45 Amps 0085 = 85 Amps 3. Number of Phase: T = Three Phase 4. Input Voltae: 2246 = VAC 4657 = VAC 5. Manuals: E = Enlish manual ** P = Portuuese manual S = Spanish manual 6. Version P = Plus version 7. End of Code Z ** E Version only stocked in the US. A ASK-4WEG Data is subject chane without notice.

71 Soft Starters SSW05 Protected Chassis Enclosure Motor Volts 230V 460V Motor HP Soft Starter AMPS Catalo Number Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol INPUT POWER SUPPLY: THREE-PHASE - 230V 3 10 SSW050010T2246EPZ X 2.3 X $531 E SSW050016T2246EPZ X 2.3 X $603 E SSW050023T2246EPZ X 2.3 X $694 E SSW050030T2246EPZ X 2.3 X $754 E SSW050045T2246EPZ X 3.1 X $943 E SSW050060T2246EPZ X 3.1 X $1,135 E SSW050085T2246EPZ X 3.1 X $1,382 E1 INPUT POWER SUPPLY: THREE-PHASE - 460V 5 10 SSW050010T2246EPZ X 2.3 X $531 E SSW050016T2246EPZ X 2.3 X $603 E SSW050023T2246EPZ X 2.3 X $694 E SSW050030T2246EPZ X 2.3 X $754 E SSW050045T2246EPZ X 3.1 X $943 E SSW050060T2246EPZ X 3.1 X $1,135 E1 60/75 85 SSW050085T2246EPZ X 3.1 X $1,382 E1 ssw05 Notes: HP ratin based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. HD current ratin with 140% O/L Accessories Description Catalo Number List Price Multiplier Symbol Remote Keypad with LED Display HMI-SSW05-RS $120 E1 3.3 ft. Remote Keypad Cable CAB-RS-1 $23 V1 6.6 ft. Remote Keypad Cable CAB-RS-2 $31 V1 10 ft. Remote Keypad Cable CAB-RS-3 $41 V1 15 ft. Remote Keypad Cable CAB-RS-5 $51 V1 25 ft. Remote Keypad Cable CAB-RS-7.5 $62 V1 33 ft. Remote Keypad Cable CAB-RS-10 $72 V1 Data is subject to chane without notice. WEG Automation - Products and Solutions A-71

72 ssw05 ssw05 Soft Starters SSW05 Settins and Indications SSW05 Technical Data Power Supply Main Voltae Vac (+10%, -15%) Control Voltae Vac Frequency 50 / 60Hz (+/- 5Hz) Enclosure Duty Cycle IP00 Protected Chassis 300% rated current durin 10 seconds, 4 starts per hour Control Inputs Diital One input for Start/Stop ( Vac) One input for Fault Reset ( Vac) Control Outputs Diital One relay output for Run indication (1 Amp - 250V) One relay output for Ful Voltae indication (1 Amp - 250V) Communication Serial Interface RS-232C Safety Protection Motor overload* Locked rotor* Over current* Phase sequence* Phase loss* * Can be disabled SCR overload Control Features Pedestal Voltae 30 80% of line voltae Accel Ramp seconds Decel Ramp Off seconds Motor Current % of SSW-05 ratin Fault Reset Manual or Automatic Ambient Temperature ºF (0-55ºC) Humidity 0 90% Non Condensin Altitude m (3,300 ft) - Standard Operation at Rated Current Up to 4000m (13,200 ft) - With Current Deratin (1%/100m (328 ft) above 1000m (13,200 ft) ) Conformities Low Voltae UL Industrial Control Equipment IEC EMC EMC Directive 89 / 336 / EEC - Industrial Environment, Class A A ASK-4WEG Data is subject chane without notice.

73 SSW07 Soft Starters Soft Starters are static startin devices, desined for the acceleration, deceleration and protection of the three phase, electric induction motors throuh the control of the voltae applied to the motor. The SSW07, with DSP control (Diital Sinal Processor), was desined to provide reat performance on motor starts and stops with an excellent costbenefit relation. Easy to set up, it simplifies start-up activities and daily operations. The SSW07 is compact, optimizin space in electric panels. The SSW07 incorporates all electric motor protections and adapts to customer needs throuh its easy-to-install optional accessories. Optionally, a keypad, a communication interface or a motor PTC input can be added to the product. SSW07 Applications Chemical and Petrochemical Plastic and Rubber Pulp and Paper Suar and Alcohol Beveraes Cement and Minin Food and Beverae Textile Metallury Ceramics Glass Refrieration Wood Sanitation Load Transportation Pumps and Fans Standard Features Universal voltae (220 to 575 Vac) Built-in run rated (AC1) by-pass contactor Sinificant reduction of mechanical stresses throuh the couplin and transmission devices (earboxes, pulleys, ears, conveyors, etc.) durin the start Increases motor and machine mechanical equipment lifetime due to the elimination of mechanical shock Easy operation, setup, maintenance & installation Simple setpoint prorammin throuh trim pots Operates in environments up to 55ºC without current reduction Interal, electronic motor protection Built-in electronic thermal relay Avoids Water Hammer in pumps Limitation of voltae drop durin start Switched type power supply with EMC filter for the control electronics (110 to 240 Vac) Voltae monitorin of the electronics to back-up lxt values (thermal imae) SuperDrive G2 compatible Conformal coated circuit boards Data is subject to chane without notice. WEG Automation - Products and Solutions A-73

74 SSW07 ssw05 Soft Starter 5 to 400 HP SSW07 1 SSW Codin 3 T S 6-7 Z 1. SSW07 series ssw06 2. Rated Current 0017 = 17 Amps 0200 = 200 Amps 0412 = 412 Amps 3. Number of Phase: T = Three Phase 4. Input Voltae: 5 = VAC 5. Version: S = Standard 6. Coolin fan H1 = 120VAC for frame sz 4 only 7. End of Code Z A ASK-4WEG Data is subject chane without notice.

75 Soft Starters SSW07 IP20 Frame Size 1 & 2, IP00 Frame Size 3 & 4 Motor Volts 220V / 230V 460V / 480V 575V Soft Starter Motor HP Catalo Number AMPS INPUT POWER SUPPLY: THREE PHASE - 220V / 230V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol 5 17 SSW070017T5SZ x 3.74 x $1,158 E SSW070024T5SZ x 3.74 x $1,241 E SSW070030T5SZ x 3.74 x $1,281 E SSW070045T5SZ x 5.57 x $1,461 E SSW070061T5SZ x 5.57 x $1,646 E SSW070085T5SZ x 5.57 x $1,992 E SSW070130T5SZ x 8.6 x $2,501 E SSW070171T5SZ x 8.6 x $3,177 E SSW070200T5SZ x 8.6 x $3,766 E SSW070255T5SZ 4 13 x 8.94 x $4,598 E SSW070312T5SZ 4 13 x 8.94 x $4,992 E SSW070365T5SZ 4 13 x 8.94 x $5,187 E SSW070412T5SZ 4 13 x 8.94 x $6,088 E1 INPUT POWER SUPPLY: THREE PHASE - 460V / 480V SSW070017T5SZ x 3.74 x $1,158 E SSW070024T5SZ x 3.74 x $1,241 E SSW070030T5SZ x 3.74 x $1,281 E SSW070045T5SZ x 5.57 x $1,461 E SSW070061T5SZ x 5.57 x $1,646 E SSW070085T5SZ x 5.57 x $1,992 E SSW070130T5SZ x 8.6 x $2,501 E SSW070171T5SZ x 8.6 x $3,177 E SSW070200T5SZ x 8.6 x $3,766 E SSW070255T5SZ 4 13 x 8.94 x $4,598 E SSW070312T5SZ 4 13 x 8.94 x $4,992 E SSW070365T5SZ 4 13 x 8.94 x $5,187 E SSW070412T5SZ 4 13 x 8.94 x $6,088 E1 INPUT POWER SUPPLY: THREE PHASE - 575V SSW070017T5SZ x 3.74 x $1,158 E SSW070024T5SZ x 3.74 x $1,241 E SSW070030T5SZ x 3.74 x $1,281 E SSW070045T5SZ x 5.57 x $1,461 E SSW070061T5SZ x 5.57 x $1,646 E SSW070085T5SZ x 5.57 x $1,992 E SSW070130T5SZ x 8.6 x $2,501 E SSW070171T5SZ x 8.6 x $3,177 E SSW070200T5SZ x 8.6 x $3,766 E SSW070255T5SZ 4 13 x 8.94 x $4,598 E SSW070312T5SZ 4 13 x 8.94 x $4,992 E SSW070365T5SZ 4 13 x 8.94 x $5,187 E SSW070412T5SZ 4 13 x 8.94 x $6,088 E1 SSW07 Notes: HP ratin based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. HD current ratin with 140% O/L Data is subject to chane without notice. WEG Automation - Products and Solutions A-75

76 Soft Starters SSW07 Accessories ssw05 SSW07 ssw06 Keypads Keypad Cables Communication Kits Description Catalo Number List Price Multiplier Symbol Keypad HMI-LOCAL-SSW07 $174 E1 Remote Keypad Kit HMI-REMOTE-SSW07 $340 E1 3.3 ft Remote Keypad Cable CAB-RS-1 $23 V1 6.6 ft Remote Keypad Cable CAB-RS-2 $31 V1 10 ft Remote Keypad Cable CAB-RS-3 $41 V1 16 ft Remote Keypad Cable CAB-RS-5 $51 V1 25 ft Remote Keypad Cable CAB-RS-7.5 $62 V1 33 ft Remote Keypad Cable CAB-RS-10 $72 V1 RS-232 Communication Kit KRS-232-SSW07 $121 E1 RS-485 Communication Kit KRS-485-SSW07 $201 E1 Cable for Communication RS232 (DB9-DB9) - 3m CAB-COMM-3 $75 E1 Cable for Communication RS232 (DB9-DB9) - 10m CAB-COMM-10 $164 E1 DeviceNet Communication Kit plus Remote HMI Connection KFB-DN SSW07/08 $353 E1 Ventilation Kit M2 (Frame Size 2, 45 to 85A) SSW07-VENT KIT-M2 $65 E1 Ventilation Kit M3 (Frame Size 3, 130 o 200A) SSW07-VENT KIT-M3 $94 E1 PTC Kit for motor KIT-PTC-SSW07-MOTOR $123 E1 IP20 Kit for M3 (Frame Size 3, 130 o 200A) KIT-IP20-SSW07 $62 E1 IP20 Kit for M4 (Frame Size 4, 255 o 412A) KIT-IP20-SSW07 SZ4 $130 E1 Superdrive G2 Kit (KRS-232-SSW07+CAB-COMM-3+CD Software) KSDG2-SSW07 $225 E1 * Coolin fans are 120VAC - sinle phase A ASK-4WEG Data is subject chane without notice.

77 Soft Starters SSW07 Applications and Indications Supply Input Settin Trimpots DIP Switch for thermal class settin DIP Switch to set and enable the protections and modes SSW-07 Status Indication LEDS SSW07 Electronics Power Supply (A1 e A2) Motor On/Off command [D 1 and Reset (D 2 and D 3)] Lid for optional Plu Ins Relay Output Motor Output Startin Method Comparison Typical Starters CURRENT Direct on Line Starter Star / Delta Starter Soft Starter TIME Data is subject to chane without notice. WEG Automation - Products and Solutions A-77

78 Soft Starters SSW07 ssw05 SSW07 Prorammin Features All prorammin necessary for startin any type of load is available throuh trimpots and dip-switch. Voltae Ramp Permits smooth acceleration and/or deceleration, throuh voltae ramps. SSW07 Current Limit Permits to set the current limit durin the start, accordin to the application requiriments. Voltae Kick Start Enables an initial voltae pulse which, applied to the motor, provides initial startin torque reinforcement. This is necessary for startin hih breakway torque loads. Built in By Pass ssw06 Built-in by-pass minimizes power losses and heat dissipation in the thyristors, providin size reduction and contributin to enery savin. This is available in all models. SSW-07 Model Heiht H mm (In) Width L mm (In) Depth. P mm (In) A mm (In) B mm (In) C mm (In) D mm (In) Fixin screw Weiht k (Ib) Enclosure SSW SSW SSW (6.38) 95 (3.74) 157 (6.18) 85 (3.35) 120 (4.72) 5 (0.20) 4 (0.16) M4 1.3 (2.9) IP20 SSW SSW SSW (8.19) 144 (5.67) 203 (7.99) 132 (5.2) 148 (5.83) 6 (0.24) 3.4 (0.13) M4 3.3 (7.28) IP20 SSW SSW SSW (10.9) 223 (8.78) 220 (8.66) 208 (8.19) 210 (8.27) 7.5 (0.3) 5 (0.2) M ) IP00* L Table 3.1 Data for installation with dimensions in mm (in) *Option for IP20 Kit A B D H C WP A ASK-4WEG Data is subject chane without notice.

79 Soft Starters SSW07 Accessories and Options The SSW07 Soft Starters can be interconnected to quick FieldBus communication networks, throuh Modbus RTU protocol. Mainly desined to interate lare industrial automation plants, the hih speed communication networks provide advantaes in supervision, monitorin and control. The SSW07 provides hih performance and reat operatin flexibility, characteristics which are demanded for complex or interated system applications. For interconnection in FieldBus type communication networks, the SSW07 Soft Starters allow the installation of plu-in type options on the front of the product. There are optional modules for the Modbus RTU protocol for communication over RS-232 or RS-485. SSW07 HMI-LOCAL-SSW07 The MMI with 7-sement LED display allows excellent parameter display from a distance. The interface incorporates the Copy function, which permits the user to copy the parameters from one SSW07 to another, providin fast prorammin, reliability and repeatability for an OEM. Plu-in type MMI in front of product. HMI-REMOTE SW07 Remote HMI for placement in panel door or machinery console. SuperDrive G2 KSDG2-SSW07 Software in Windows platform, for SSW07 prorammin, command and monitorin. SSW07 automatic identification Reads SSW07 parameters Writes parameters in SSW07 Edits online parameters in SSW07 Edits offline parameters in PC Enables creation of all application documentation Easily accessible Enables prorammin, command and monitorin of the SSW07 Supplied with a 3m RS-232 serial cable when the Superdrive G2 software is acquired Free version available at WEG s website Cable for connectin MMI to SSW07. Cable lenth: 1, 2, 3, 5, 7.5 and 10m. Data is subject to chane without notice. WEG Automation - Products and Solutions A-79

80 Soft Starters SSW07 SSW07 Accessories and Options CAB-COMM-3 OR CAB-COMM-10 Cable for connectin RS-232. Cable lenth in 3 and 10m. SSW07 COMMUNICATION MODULES DeviceNet module KFB-DN SSW07/08 KIT-PTC-SSW07 MOTOR Optional module for motor PTC connection. SSW07-VENT KIT-M2 OR M3 For models from 45 A to 200 A. A ventilation kit is necessary for heavy duty startin cycle. A ASK-4WEG Data is subject chane without notice.

81 Soft Starters SSW07 Technical Specifications Power 220 to 575 Vac Power Supply Control 110 to 240 Vca (-15% to +10%), or 94 to 264 Vac Frequency 50 to 60 Hz (+/- 10%), or 45 to 66 Hz Enclosure Injected plastic IP20 in models from 17 to 85 A IP00 in models from 130 to 200 A (IP20 as option) Control Control Method Voltae variation over the load (three-phase induction motor) CPU DSP type microcontroller (Diital Sinal Processor) Types of Control Voltae ramp Current limit adjustable % Startin Cycle (1) Normal 300% (3 x Inom.) durin 30 s, 10 starts per hour ( every 6 minutes) Inputs Diital 3 isolated prorammable inputs (120Vac) Outputs Relay 2 relays with NO contacts, 240Vac, 1A, prorammable functions Safety Standard Protection Overcurrent; Locked Rotor Overcurrent before By-pass Excess startin time SSW07 Phase loss; Inverted phase sequence; Overtemperature in power heatsink; Motor Overload (class 5 to 30) Undercurrent Current imbalance Subcurrent before By-pass External defects Frequency outside tolerance By-pass contact open Undervoltae in control supply Prorammin error Serial communication error MMI communication error Overtemperature in motor PTC Functions / Resources Standard Voltae ramp (Initial voltae: 30% to 90%) Current limitation (150% to 450% of SSW-07 rated current) Startin time (1 to 40s) Kick Start (Off - 0,2 to 2s) Deceleration ramp ( 0 to 40s) Motor and SSW-07 current relation (50% to 100%) Faults auto-reset Thermal memory auto-reset Factory standard reset Soft-starter built-in By-pass (1) For the 45 to 200 A units usin the ventilation kit. Data is subject to chane without notice. WEG Automation - Products and Solutions A-81

82 ssw05 SSW07 Soft Starters SSW07 Technical Specifications Prorammin Accessory (MMI or Serial communication) Command Additional Functions / Resources On, Off / Reset and Parameterization (function Prorammin) Startin time up to 240s Deceleration time up to 240s Proram enablin password Selection for Local / Remote operation COPY function (SSW-07 >>> MMI and MMI >>> SSW-07) Prorammable rated voltae Supervision (Readin) Motor current (%Soft-Starter In) Motor current (%motor In) Motor current (A) Current indication in each phase R-S-T Supply network frequency Apparent power supplied to load (kva) Soft-Starter status Diital input and output status Back up of 4 last errors Soft-Starter Software Version Heatsink temperature Motor thermal protection status Accessories and Options Options Plu-in type local MMI MMI remote Kit 1,2,3,5,7.5 and 10m for remote MMI interconnection RS-232 communication kit SSW-07 interconnection cables>>> PC Serial (RS-232) 3 and 10m RS-485 communication kit Motor PTC kit Ventilation kit for size 2 (45 to 85 A) Ventilation kit for size 3 (130 to 200 A) IP20 kit for size 3 (130 to 200 A) Finishin Color Lid: Gray Ultra Mat Cabinet: Blue Ultra Mat Safety UL 508 Standard- Industrial Control Equipment Certifications Low voltae EN ;LVD 2006/95/EC Standard Low voltae Directive EMC EMC 89/336/EEC Directive Industrial Environment UL (USA) / cul (Canada) Underwriters Laboratories Inc. USA CE (Europe) Conformity test conducted by EPCOS C-Tick (Australia) Australian Communication Authority GOST (Russia) A ASK-4WEG Data is subject chane without notice.

83 SSW06 Soft Starters The SSW06 is WEG s third eneration Soft Starter line. The keypad, with dual display, has red LED diits which provide visibility and make prorammin easier. Interal bypass contacts eliminate heat dissipation once the motor is at full voltae, which makes it extremely compact and allows for simple interation into non ventilated enclosures and replacement of electro-mechanical starters in Motor Control Centers. Applications Standard Features Pumps Fans Blowers Compressors Crushers Saws Grinders Mixers Optional Features RS-485 serial interface Remote keypad cables and mountin frame PC prorammin software V, 50/60Hz input power supply Built-in run rated (AC1) bypass contactor* Rated 450% current Conformal coated circuit board Voltae ramp or current limit start modes Detachable keypad with dual display (LCD and LED) and copy function Vac auxiliary control voltae Sinle 32 bit RISC processor based control board IP00 protected chassis enclosure Six isolated 24Vdc prorammable diital inputs Three prorammable relay outputs (2 Amp - 250V) One 0-10Vdc prorammable analo output One 4-20mA prorammable analo output Motor PTC thermistor input RS-232 serial interface Adjustable acceleration and deceleration ramps (1-299 seconds) Adjustable pedestal voltae (25-90% of line voltae) Dianostic features: Motor overload, over current and phase loss, motor immediate over and under current, SCR over temperature and fault, line phase loss and phase sequence, line over and under voltae Display readins: Motor current, voltae, kw and power factor, line voltae and frequency, four last fault trips, run and power-up timers Ambient: 32ºF (0ºC) to 131ºF (55ºC), 3300 ft (1000m) altitude, 90% non-condensin humidity ssw06 *= SSW06 950A, 1100A, and 1400A units do not include interated AC1 bypass Data is subject to chane without notice. WEG Automation - Products and Solutions A-83

84 SSW06 Soft Starter 3 to 1200 HP Codin 1 SSW T E 6 S 7-8 Z 1. SSW06 series ssw06 ssw06 2. Rated Current 0010 = 10 A 0170 = 170 A 3. Number of Phase: T = Three Phase 4. Input Voltae: 2246 = VAC 5. Manuals: E = Enlish 6. Version S = Standard 7. Coolin fan H1 = coolin fans are external supply with 120VAC H2 = coolin fans are external supply with 230VAC 8. End of Code Z A ASK-4WEG Data is subject chane without notice.

85 ssw05 SSW07 Soft Starters SSW06 IP00 Protected Chassis Enclosure Built-in bypass up to 820A Motor Soft Starter Motor HP Catalo Number Volts AMPS INPUT POWER SUPPLY: THREE-PHASE - 230V 230V 460V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price 3 10 SSW060010T2257ESZ 1 10 x 5 x 7 7 $1,386 E SSW060016T2257ESZ 1 10 x 5 x 7 7 $1,429 E SSW060023T2257ESZ 1 10 x 5 x 7 7 $1,572 E SSW060030T2257ESZ 1 10 x 5 x 7 7 $1,703 E SSW060045T2257ESZ x 5.2 x $1,976 E SSW060060T2257ESZ x 5.2 x $2,181 E1 25 / SSW060085T2257ESZ x 5.2 x $2,771 E SSW060130T2257ESZ x 5.2 x $3,547 E SSW060170T2257ESZ x 8.8 x $4,270 E SSW060205T2257ESZ x 8.8 x $5,354 E SSW060255T2257ESZ x 14.6 x $7,188 E SSW060312T2257ESZ x 14.6 x $7,896 E SSW060365T2257ESZ x 14.6 x $8,721 E SSW060412T2257ESZ 5 26 x 15 x $9,465 E SSW060480T2257ESZ 5 26 x 15 x $11,730 E SSW060604T2257ESZ 5 26 x 15 x $13,082 E SSW060670T2257ESZ 6 32 x 22 x $14,878 E SSW060820T2257ESZ 6 32 x 22 x $17,573 E SSW060950T2257ESH1Z* 7 36 x 23 x $26,592 E SSW060950T2257ESH2Z* 7 36 x 23 x $26,592 E SSW061100T2257ESH2Z* 8 49 x 27 x $33,351 E SSW061400T2257ESH2Z* 8 49 x 27 x $42,863 E1 INPUT POWER SUPPLY: THREE-PHASE - 460V 5 10 SSW060010T2257ESZ 1 10 x 5 x 7 7 $1,386 E SSW060016T2257ESZ 1 10 x 5 x 7 7 $1,429 E SSW060023T2257ESZ 1 10 x 5 x 7 7 $1,572 E SSW060030T2257ESZ 1 10 x 5 x 7 7 $1,703 E SSW060045T2257ESZ x 5.2 x $1,976 E SSW060060T2257ESZ x 5.2 x $2,181 E1 50 / 60 / SSW060085T2257ESZ x 5.2 x $2,771 E SSW060130T2257ESZ x 5.2 x $3,547 E SSW060170T2257ESZ x 8.8 x $4,270 E SSW060205T2257ESZ x 8.8 x $5,354 E SSW060255T2257ESZ x 14.6 x $7,188 E SSW060312T2257ESZ x 14.6 x $7,896 E SSW060365T2257ESZ x 14.6 x $8,721 E SSW060412T2257ESZ 5 26 x 15 x $9,465 E SSW060480T2257ESZ 5 26 x 15 x $11,730 E SSW060604T2257ESZ 5 26 x 15 x $13,082 E SSW060670T2257ESZ 6 32 x 22 x $14,878 E SSW060820T2257ESZ 6 32 x 22 x $17,573 E SSW060950T2257ESH1Z* 7 36 x 23 x $26,592 E SSW060950T2257ESH2Z* 7 36 x 23 x $26,592 E SSW061100T2257ESH2Z* 8 49 x 27 x $33,351 E SSW061400T2257ESH2Z* 8 49 x 27 x $42,863 E1 Notes: HP ratin based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions. 2) 120V or 240V Control Power Supply required. 3) For other technical data please refer to WEG product manual. Multiplier Symbol ssw06 SSW06 950A, 1100A, and 1400A units do not include interated AC1 by-pass WEG Automation - Products and Solutions A-85

86 Soft Starters SSW06 IP00 Protected Chassis Enclosure ssw06 ssw06 Motor Volts 575V Motor HP Soft Starter AMPS Catalo Number INPUT POWER SUPPLY: THREE-PHASE - 575V Frame Size Dimensions (in.) H x W x D App. Shp. Wt. (lbs.) List Price Multiplier Symbol SSW060010T2257ESZ 1 10 x 5 x 7 7 $1,386 E SSW060016T2257ESZ 1 10 x 5 x 7 7 $1,429 E SSW060023T2257ESZ 1 10 x 5 x 7 7 $1,572 E SSW060030T2257ESZ 1 10 x 5 x 7 7 $1,703 E SSW060045T2257ESZ x 5.2 x $1,976 E SSW060060T2257ESZ x 5.2 x $2,181 E SSW060085T2257ESZ x 5.2 x $2,771 E SSW060130T2257ESZ x 5.2 x $3,547 E SSW060170T2257ESZ x 8.8 x $4,270 E SSW060205T2257ESZ x 8.8 x $5,354 E SSW060255T2257ESZ x 14.6 x $7,188 E SSW060312T2257ESZ x 14.6 x $7,896 E SSW060365T2257ESZ x 14.6 x $8,721 E SSW060412T2257ESZ 5 26 x 15 x $9,465 E SSW060480T2257ESZ 5 26 x 15 x $11,730 E SSW060604T2257ESZ 5 26 x 15 x $13,082 E SSW060670T2257ESZ 6 32 x 22 x $14,878 E SSW060820T2257ESZ 6 32 x 22 x $17,573 E SSW060950T2257ESH1Z 7 36 x 23 x $26,592 E SSW060950T2257ESH2Z 7 36 x 23 x $26,592 E SSW061100T2257ESH2Z 8 49 x 27 x $33,351 E SSW061400T2257ESH2Z 8 49 x 27 x $42,863 E1 Notes: 1) HP ratin based on Table of the NEC. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of starter. 2) 120V or 240V Control Power Supply required. 3) For other technical data please refer to WEG product manual. SSW06 950A, 1100A, and 1400A units do not include interated AC1 by-pass Accessories Keypads & Keypad Cables Communication I/O Exp. Mod. IP20 Kits Description Catalo Number List Price Multiplier Symbol Standard Keypad with LED & LCD HMI-SSW06-LCD $202 E1 Remote Keypad FRAME KIT KMR-SSW06 $63 E1 3.3 ft. Remote Keypad Cable CAB-HMI-SSW06-1 $33 E1 6.6 ft. Remote Keypad Cable CAB-HMI-SSW06-2 $39 E1 10 ft. Remote Keypad Cable CAB-HMI-SSW06-3 $44 E1 16 ft. Remote Keypad Cable CAB-HMI-SSW06-5 $68 E1 Profibus DP-PV1 Communication Kit KFB-PDPV1-SSW06 $1,194 E1 DeviceNet Drive Profile Communication Kit KFB-DD $1,094 E1 Ethernet/IP Communication Kit KFB-ENIP $2,100 E1 SuperDrive Kit KSDG2-SSW06 $62 E1 USB Communication Kit KUSB SSW06 $206 E1 Interface for RS-485 Communication KRS-485-SSW06 $189 E1 KEIO Module for SoftPLC application; 6 isolated DI, 6 relay DI KEIO SSW06 $780 E1 PT100 temperature transducer board; 5 sensor inputs K-PT100 $397 E1 SSW06 IP20 Kit - Size 2 (85-130A) KIT IP20 SSW06 M2 $210 E1 SSW06 IP20 Kit - Size 3 ( A) KIT IP20 SSW06 M3 $236 E1 SSW06 IP20 Kit - Size 4 & 5 ( A) KIT IP20 SSW06 M4 $254 E1 SSW06 IP20 Kit - Size 6 ( A) KIT IP20 SSW06 M6 $536 E1 A ASK-4WEG Data is subject chane without notice.

87 ssw05 Soft Starters SSW06 Technical Data Power Supply Main Voltae Three-phase VAC (+10%, -15%) Control Voltae Sinle-phase VAC (+10%, -15%), Fan: 110 or 230 VAC only for frame size 4 Frequency 50 / 60 Hz (+/- 10 %) Enclosure Metallic Cabinet IP-00 Deree of Protection Color Cover: Opaque Gray, Cabinet: Opaque Blue Control Method Voltae ramp, Current Limit and Pump Control Power Supply Switched mode CPU 32 bit RISC Microprocessor Startin Duty Cycle Normal 300 % (3 x Rated) for 30 seconds, 10 starts per hour Heavy 450 % (4.5 x Rated) for 30 seconds with 33% current deratin Control Inputs 5 X 24 VDC prorammable isolated inputs Diital 1 X Motor PTC thermistor Control Outputs 2 prorammable outputs 250 VAC / 1A Form A Contact (NO) Relay 1 prorammable output 250 VAC / 1A Form C Contact (NO+NC) Analo 1 Prorammable Output (11 bits): 0-10 VDC 1 prorammable output (11 bits) 0-20mA or 4-20mA Safety Under voltae, phase fault or phase imbalance Excess current limit time Over temperature Motor locked rotor Motor overload I 2 t Motor over current and under current External Fault Phase sequence Copy function error Control under voltae Motor not connected Opened bypass contactor Protections Over voltae Over current before bypass Prorammin error Immediate over current durin bypass Communication errors Current imbalance Keypad connection error Power supply frequency out of rane Motor over current Under current before bypass Motor over temperature (via thermistor Input) Bypass contacts not opened Self Dianosis error Functions / Features Standard Optional Built-in operator interface, detachable with dual display LED + LCD Prorammin enablin password LCD display Lanuae selection: Enlish, Spanish, German and Portuuese Local / Remote operation selection PUMP CONTROL function (Water hammer protection for pumps) COPY function (Soft-Starter to Keypad or Keypad to Soft-Starter) Soft starter interal bypass contactor FWD / REV Feature via Diital Input (Needs External Contactor) RS-232 Serial Interface Motor PTC thermistor input Prorammable line voltae VAC Prorammable initial (pedestal) voltae 25 90% of Rated Input Voltae Prorammable acceleration ramp seconds Prorammable deceleration ramp OFF, seconds Prorammable step down voltae for deceleration % of line voltae Prorammable startin current limit OFF, % of motor rated current Prorammable immediate motor over current 0 99 % above rated current Prorammable immediate over current time OFF, 1 99 seconds Prorammable immediate motor under current 0 99 % below rated current Prorammable immediate under current time OFF, 1 99 seconds Prorammable startin torque boost, voltae or current (KICK-START) Level: % of line voltae Level: % of soft starter rated current Duration: seconds Prorammable fault auto-reset OFF, seconds Prorammable motor thermal memory auto-reset OFF, seconds Motor thermal overload protection class 0 (disabled); 5; 10; 15; 20; 25; 30; 35; 40; 45 Motor Service Factor 0 (disabled); Cable for remote keypad connection (3 to 15ft) Remote keypad mountin frame ssw05 SSW07 ssw06 Data is subject to chane without notice. WEG Automation - Products and Solutions A-87

88 Soft Starters SSW06 Technical Data ssw06 Keypad Prorammin / Commands Start / Stop, Reset and Prorammin Increase and decrease parameters and their content Display readins Soft-Starter Output current (% of soft starter rated current) Motor current (Amps) Motor current (% of motor rated current) Line frequency (0 99 Hz) Line Voltae (0 999VAC) Soft starter output voltae (0-999VAC) Motor active power (kw) Motor apparent power (kva) Soft starter status Diital and analo I/Os status Motor power factor ( ) Time Powered Time Enabled Four last faults back-up Soft starter firmware version Motor thermal protection (0-250) Motor current indication in each phase R-S-T Line voltae indication R-S / S-T / T-R Ambient Temperature ºF ( ºC): standard operation at rated current Humidity %, non condensin Altitude ft ( m): standard operation at rated current Up to ft (4000 m): with 10% / 1000 m Output Current De-ratin Certifications Safety UL 508 Standard - Industrial Control Equipment Low Voltae EN Standard; LVD 73/23/EEC Low Voltae Directive EMC EMC directive 89 / 336 / EEC - Industrial Environment UL (USA) / cul (Canada) Underwriters Laboratories Inc. - USA CE (EUROPE) Phoenix Test-Lab / Germany C-Tick (Australia) Australian Communications Authority A ASK-4WEG Data is subject chane without notice.

89 GPH2 Combination Soft Starters The Combination Soft Starter is a NEMA 4/12 Enclosed industrial eneral purpose AC motor soft starter packae. It is desined for simple and quick installation and start-up, requirin only input power and output motor connections. The Combination Soft Starter is built to complement the ruedness and reliability of WEG motors, providin a complete, simple, and cost effective AC motor startin and protection solution. GPH2 TPH2 Applications Centrifual Pumps Screw Compressors Wood Chipper Veneer Lathe Saw Conveyor Notes: HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS and Max Continuous AMPS of starter. Standard Panel Includes: Soft Starter: SSW07 from 17 to 412Amps (all models with interated AC1 by-pass). Circuit Breaker with Throuh Door Disconnect Control Power Transformer Start/Stop Pushbuttons Run/Fault Pilot Lihts Standard Features Rated for 450% 5 175HP at 230V HP at 460V Wall mounted enclosures for up to 125HP@230V Floor Mounted enclosure for up to 250HP@460V, HP@230V, HP@460V Note: SSW07 models do not include keypad Optional Features AC3 by-pass contactor and DOL Selector Switch Door mounted keypad 575V SuperDrive G2 Compatible Data is subject to chane without notice. WEG Automation - Products and Solutions A-89

90 ph2 GPH2 Combination Soft Starter 5 to 350 HP TPH2 1 GPH Codin 3 Q 4 C GPH2 series 2. Horse Power 005 = 5 HP 200 = 200 HP 350 = 350 HP 3. By-pass Q = built-in AC1 (run rated contactor) P = external AC3 (full rated contactor) 4. Circuit Breaker: C = includes circuit breaker 5. Input Voltae 2 = VAC 4 = VAC 6. Future use 0 = Future use 7. Future use 0 = Future use 8. Keypad 0 = No keypad on door 1 = Includes keypad on door A ASK-4WEG Data is subject chane without notice.

91 Soft Starters GPH2 GPH2 Series - NEMA 4/12 Enclosure Motor Volts 200V - 240V 460V - 480V Motor HP Starter AMPS Catalo Number Frame App. Shp. Wt. (lbs.) List Price Multiplier Symbol INPUT POWER SUPPLY: THREE-PHASE - 200V - 240V 5 17 GPH2005QC $3,650 E GPH2007QC2000 A 140 $3,750 E GPH2010QC $3,900 E GPH2015QC $4,300 E GPH2025QC2000 B 150 $4,800 E GPH2030QC $5,800 E1 40/ GPH2050QC $6,990 E GPH2060QC2000 C 280 $7,500 E GPH2075QC $8,450 E GPH2100QC $10,700 E1 D GPH2125QC $11,880 E GPH2150QC $12,700 E1 E GPH2175QC $14,500 E1 INPUT POWER SUPPLY: THREE-PHASE - 460V / 480V GPH2010QC $3,650 E GPH2015QC4000 A 140 $3,750 E GPH2020QC $3,900 E GPH2030QC $4,300 E1 40/50 61 GPH2050QC4000 B 150 $4,800 E GPH2075QC $5,800 E GPH2100QC $6,990 E GPH2125QC4000 C 280 $7,500 E GPH2150QC $8,450 E GPH2200QC $10,700 E1 D GPH2250QC $11,880 E GPH2300QC $12,700 E1 E GPH2350QC $14,500 E1 Notes: 1) HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS and Max Continuous AMPS of starter. 2) See options on the next pae. **Includes 12 Floor Stand Kit GPH2 includes: GPH2 Control Power Transformer with Fuses, Circuit Breaker with throuh door handle Built in AC1 Run Rated Bypass Start-Stop Pushbuttons Run and Fault Pilot Lihts Data is subject to chane without notice. WEG Automation - Products and Solutions A-91

92 Soft Starters Custom Panel ph2 Options Motor Volts 200V V 460V - 480V Motor HP Starter AMPS Oriinal Catalo Number (will chane with mod, see notes below) AC3 Full HP Rated Bypass Adders Keypad on Door Multiplier Symbol INPUT POWER SUPPLY: THREE-PHASE - 200V - 240V 5 17 GPH2005QC2000 $250 $495 E GPH2007QC2000 $282 $495 E GPH2010QC2000 $343 $495 E GPH2015QC2000 $565 $495 E GPH2025QC2000 $612 $495 E GPH2030QC2000 $785 $495 E1 40/ GPH2050QC2000 $1,270 $495 E GPH2060QC2000 $1,513 $495 E GPH2075QC2000 $1,900 $495 E GPH2100QC2000 $2,265 $495 E GPH2125QC2000 $2,967 $495 E GPH2150QC2000 $3,006 $495 E GPH2175QC2000 $6,575 $495 E1 INPUT POWER SUPPLY: THREE-PHASE - 460V / 480V GPH2010QC4000 $250 $495 E GPH2015QC4000 $282 $495 E GPH2020QC4000 $343 $495 E GPH2030QC4000 $565 $495 E1 40/50 61 GPH2050QC4000 $612 $495 E GPH2075QC4000 $785 $495 E GPH2100QC4000 $1,270 $495 E GPH2125QC4000 $1,513 $495 E GPH2150QC4000 $1,900 $495 E GPH2200QC4000 $2,265 $495 E GPH2250QC4000 $2,967 $495 E GPH2300QC4000 $3,006 $495 E GPH2350QC4000 $6,575 $495 E1 Notes: 1) These are non-stocked items. Please contact WEG for availability, product can usually ship 3-4 weeks ARO. Standard GPH2 panels are built with AC1 Run Rated Bypass and without the keypad in the door. All units are wall mounted except for the larest enclosure which includes a 12 floor kit standard. To order the above options, chane the Part Numbers as follows Part #: GPH2050QC4000 Q = built in AC1 run rated bypass or P = AC3 full bypass contactor 2 = 200/240V or 4 = 460/480V Last 0 = No keypad on door or 1 for keypad on door A ASK-4WEG Data is subject chane without notice.

93 GPH2 Dimensions GPH2 Frames A D Frame E GPH Dimensions Frame W D H1 H2 A N/A B N/A C N/A D N/A E Notes: H1 + H2 = overall heiht Data is subject to chane without notice. WEG Automation - Products and Solutions A-93

94 Crusher Duty TPH2 Starter Panels TPH2 The WEG TPH2 Series of Crusher Duty soft starters are desined to conquer the most demandin AC motor startin applications. While surpassin the hihest startin torque requirements, the protective NEMA 4/12 enclosure makes the TPH2 Crusher Duty soft starters ideal for the harsh industrial environments, even in wash down locations. Includin as standard an AC3 full HP rated bypass contactor and motor overload relay,emerency direct-on-line startin is available at the flip of a switch while still providin full motor protection. Power lus make motor connections safe and easy. The WEG TPH2 starters are built to complement the ruedness and reliability of WEG motors, providin a complete and cost effective AC motor startin and protection solution. Standard Features Rated 500% for Crusher Duty applications. NEMA 4/12 WEG Blue enclosure. Suitable for dusty, wet or outdoor applications. Narrow desin requires less space. Les eliminate difficult wall mountin. Protective barriers over 460V and 120V terminals. Circuit breaker with door mounted operator provides built-in short circuit protection and power disconnect. Full HP rated bypass contactor (AC3) with thermal overload relay and emerency start switch inside the enclosure (Softstart-Off-Across the Line) can be used in the event of Soft starter failure. Full soft starter protection durin both start and bypass provides full protection from over/under current, supply and motor phase fault, phase unbalance, overtemp and over current. Keypad and full sized operator controls on cover with steel frame NEMA-4 window and cover over keypad. All parameter chanes are throuh the cover-mounted keypad. Dust and water stay out of the enclosure. Monitorin of current, voltae, kva and kw can be done from the outside. Terminations for remote start-stop furnished - no need to trace control circuit for additional power lines. 250VA 120V service receptacle - Power up meters, lihts, and small tools without additional power lines. Modular multiple subpanel desin. Ease of field modification or component replacement. SuperDrive G2 Compatible A ASK-4WEG Data is subject chane without notice.

95 TPH2 Combination Soft Starter 100 to 500 HP Codin 1 TPH K 4 D TPH2 1. TPH2 series 2. Horse Power 100 = 100 HP 500 = 500 HP 3. By-pass K = AC3 full rated contactor 4. Circuit Breaker: D = includes circuit breaker 5. Future use 0 = Future use 6. Future use 0 = Future use 7. Future use 0 = Future use 8. Future use 0 = Future use Data is subject to chane without notice. WEG Automation - Products and Solutions A-95

96 Soft Starters Crusher Duty TPH Series TPH2 Series - NEMA 4/12 Enclosure ph2 TPH2 Motor Volts 460V - 480V Starter Motor HP Catalo Number AMPS INPUT POWER SUPPLY: THREE-PHASE - 460V / 480V TPH2100KD0000 Frame App. Shp. Wt. (lbs.) List Price Multiplier Symbol 442 $14,605 K2 A TPH2150KD $17,014 K TPH2200KD $20,938 K TPH2250KD0000 B 658 $22,300 K TPH2300KD $27,946 K TPH2350KD $30,293 K TPH2400KD0000 C 855 $34,357 K TPH2500KD $43,756 K2 Notes: HP ratin based on averae FLA values. Use as a uide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS and Max Continuous AMPS of starter. TPH Dimensions Frame W D H1 H2 H1 + H2 A B C Notes: H1 + H2 = overall heiht A ASK-4WEG Data is subject chane without notice.

97 CALL NOW Motors Automation Enery Transmission & Distribution Coatins TPH2 TPH2 ph2 WARRANTY WEG is Green! Visit WEGreen.com to learn more about: WEG s Commitment to Green The Enery Independence and Security Act of 2007 (E.I.S.A) Worldwide Enery Leislation affectin U.S. exports Total Cost of Ownership and Payback Analysis Calculatin Enery Savins with WEG motors and variable frequency drives WEG s Enery Efficient Products Enery Savins Calculators for your Blackberry To learn more about WEG s lobal solutions or to locate a WEG Distributor near you, please call ASK-4WEG or visit Transformin enery into solutions WEG Electric Corp. Motors with hiher efficiency and lower total cost of ownership... We call it WEGnoloy. CALL NOW

98 MVW01 MVW01 Medium Voltae Drives Variable Frequency Drives WEG offers a complete packae of medium voltae drive systems that includes: Input Switchear, Dry-type or Oil-type Phase-shiftin Transformer, Variable Frequency Drive (VFD) and Medium Voltae Motor. WEG Medium Voltae Variable Frequency Drives are desined with state of the art technoloy and use a multilevel structure with hih voltae IGBTs (6,5kV) reducin the motor harmonic currents to extremely low levels. The input rectifier confiuration with 12-pulse or 18-pulse results in hih power factor and fully meets IEEE-519 requirements for THD. The MVW-01 is desined with multiprocessin control architecture that uses a 32-bit hih performance processor (64-bits bus) with floatin-point capability, ensurin a hih performance control of the drive and motor. The MVW-01 follows the same prorammin philosophy of the LV WEG drive, resultin in a simple speed variation solution for MV applications. The MVW- 01 drive is a remarkably innovative medium voltae drive, combinin robustness, simplicity, reliability and safety in a compact solution with the latest eneration technoloy. Main characteristics Totally diital with hih performance 32-bit processor (64-bits bus) Smart keypad with raphic display LCD Motor voltaes: 2.3, 3.3 or 4.16kV, 6.9kV Power ratins up to 8000HP IP41/NEMA 1 Enclosure Air-cooled 12-pulse Input Rectifier (18 or 24-pulse as an option), 36 pulse on 6.6kV H ih power factor (> 0.95). Multilevel topoloy (NPC - Neutral Point Clamp - 3/5 levels) Fiber optic isolation between the control section and the hih voltae power section Voltae Source Inverter (VSI) Latest eneration technoloy of Hih Voltae IGBT s (6.5kV) results in a reduced number of components, improvin the system efficiency and reliability Ultra-reliable dry-type plastic film power capacitors (no need to reformat for as lon as 15 years) Withdrawable power arms (easy and fast maintenance) Hih efficiency 99% Low noise level (< 75dB) Low drive losses (low heat eneration) Conformal coated circuit boards Option to mount transformer adjacent to drive cabinet or separately. 70% savins on heat loss SuperDrive G2 compatible A ASK-4WEG Data is subject chane without notice.

99 CALL NOW MVW01 Frequency Variable Drives MVW-01 Applications Petrochemical, Oil and Gas Industries n Pumps n Fans / Exhausters n Compressors n Mixers/Aitators Cement and Minin n Pumps n Fans / Exhausters n Conveyors n Cement Kilns Suar and Chemical Mill n Fans n Exhausters n Suar Pulp and Paper n Pumps n Fans n Exhausters n Refiners Plastic and Rubber n Banburys n Extruders Waste Water n Pumps n Blowers Data is subject to chane without notice. WEG Automation - Products and Solutions A-99 CALL NOW

100 CALL NOW Frequency Variable Drives MVW-01 Exploded Diaram Front Access only to cabinet sections MVW01 Air-coolin n Simple maintenance n Low drive losses n Low noise level 12, 18, 24 pulse rectifiers n 36-pulse rectifier for 6kV n Low harmonic distortion n Hih power factor (> 0.95) Withdrawable IGBT Arms n Withdrawable Power Arms n Gate-drives / feedbacks / monitorin optical fiber n S imple control connections n Stabs for power connections n Simple and fast maintenance DC Link Monitorin n V isual indication of voltae presence on the DC Link A ASK-4WEG Data is subject to chane without notice. CALL NOW

101 CALL NOW MVW01 Frequency Variable Drives MVW-01 Exploded Diaram Monitorin and Protection n A rc detection for the power section n Temperature monitorin n Ventilation monitorin throuh pressure sensor Fiber Optic Interface n Noise immunity n Hih Voltae insulation n Fiber optic for the power and control interconnection: ate drives, feedbacks, temperature monitorin, voltae. Simple Keypad n Double display (LED and LCD) for easy display and prorammin n Uses the same keypad of the low Safety Operation n Mechanical interlock for the power sections n Electro-mechanical interlockin with the main input circuit breaker, which does not allow the doors openin when the circuit breaker is on. Data is subject to chane without notice. voltae drives (raphical keypad as an option) n MV Drive prorammin follows the same philosophy of the LV drives WEG Automation - Products and Solutions A-101 CALL NOW

102 MVW01 Frequency Variable Drives MVW-01 Technical Data Main Power Supply Voltae 2300, 3300 or 4160V (+ 10%, -20% with output power de-ratin) Frequency 50 or 60Hz (± 3%) Phase Unbalance Less than 3% True Power Factor Greater than 0.95 Control Power Supply Voltae 220V / 380V / 400V / 415V / 440V / 460V / 480V Frequency 50 or 60Hz (± 3Hz) Phase Unbalance Less than 3% Enclosure Standard NEMA 1 / IP41 Control Microprocessor 32 bits Control Type SVM Sinusoidal PWM (Space Vector Modulation) and optimal pulses (OPP) Fully Diital Control Mode V / Hz Voltae Source Switchin Mode Hih Voltae IGBT (HV IGBT) Frequency Rane Hz Overload Capacity 150% for 60 seconds, every 10 minutes (1,5 x I rated - CT) 115% for 60 seconds, every 10 minutes (1,15 x I rated - VT) Efficiency 99% Performance Reulation (with Slip Compensation): 0,5% of Motor Rated Speed Speed Control V /Hz Resolution: 1 rpm (Keypad Reference Speed Reulation Rane: 1:20 Control Units 2 Prorammable Differential Inputs (10 bits): V, mA or mA Analo 1 Prorammable Isolated Input (10 bits): V, mA or mA 1 Prorammable Bipolar Input (14 bits): V, mA or mA * 1 Prorammable Isolated Input (10 bits): V, mA or mA * Diital 8 Prorammable Isolated Inputs: 24Vdc 1 Prorammable Isolated Input: 24Vdc * 1 Prorammable Isolated Input: 24Vdc (for Motor PTC Thermistor) * Control Outputs 2 Prorammable Outputs (11 bits): V Analo 2 Prorammable Isolated Outputs (11 bits): mA or mA 2 Prorammable Bipolar Outputs (14 bits): V * 2 Prorammable Isolated Outputs (11 bits): mA or mA * Relay 5 Prorammable Outputs, Form C Contacts (NO/NC): 240Vac, 1A Transistor 2 Prorammable Isolated Outputs (Open Collector): 24Vdc, 50mA * Communication RS-232 (point-to-point) Serial Interface RS-485, Isolated, with EBA or EBB Expansion Boards (multi-point up to 30 drives) * Fieldbus Communication Modbus RTU (Built-in) via RS-485 serial Profibus DP or DeviceNet (via Communication Board) Safety DC Link Overvoltae Output Short Circuit DC Link Undervoltae Output Ground Fault Protections Drive and Motor Overtemperature External Fault (storae of the last 100 faults/ Output Overcurrent Self-dianosis Fault and Prorammin Error alarms with date and time) Motor Overload (I x t) Serial Communication Fault Dynamic Brakin Resistor Overload Power Supply Phase Loss CPU / EPROM Error (Watchdo) Keypad Connection Fault Ambient Temperature F (40 C) (up to 122 F (50 C) with 2,5% Output Current De-ratin / C) Humidity % Non Condensin Altitude ft (1000 m) (up to ft (4000 m) with 10% output current deratin / 1000m Finishin Munsell Gray 5PB7/4 (Doors) Color Munsell Blue 5PB2/6 (Base, Roof and Shutter) Conformities EMC Directive 89 / 336 / EEC Industrial Environment Electromanetic Compatibility Standards CEI Standard IEC (EMC Emission and Immunity Adjustable Speed Electrical Power Drive System CEI IEC Part 4 General Requirements Part 5 Safety Requirements UL (USA) Underwriters Laboratories Inc. USA (File E253837) * Optional A ASK-4WEG Data is subject chane without notice.

103 Frequency Variable Drives MVW-01 Technical Data Keypad Control Features Commands Monitorin Standard Options These data is subject to chanewithout previous notice Start / Stop, General Functions Prorammin Increase / Decrease Speed JOG, FWD/VER and Local/Remote Speed Reference (rpm) Output Current (A) Motor Speed (rpm) Output Voltae (V) Speed Proportional Value (Ex: ft/min) Drive Status Output Frequency (Hz) Status of Diital Inputs DC Link Voltae (V) Status of Diital Outputs Motor Torque (%) Status of Relay Outputs Output Power (kw) Analo Inputs Value Hours Powered Up (h) 100 Last Faults with Date and Time Hours Enabled (h) Fault / Alert Messaes Keypad with LCD + LED displays Password to protect drive prorammin LCD display lanuae selection: Enlish, Spanish and Portuuese Fault auto-dianosis and auto-reset Parameters reset to factory or user default Inverter Self-tunin to motor and load (Vector Modes Specific unit indication (Ex: l/s, t/h, %, etc.) Slip compensation (V / Hz Mode) Manual and Automatic Torque Boost I x R (V / Hz Mode Adjustable V / Hz Curve (V / Hz Mode) Minimum and maximum speed limits Maximum current limit Adjustable motor overload protection Adjustable diital ain and offset for the analo inputs Adjustable diital ain for the analo outputs JOG function JOG + / JOG Function (momentary speed increase/decrease) COPY Function (Drive Keypad or Keypad Drive) Comparison functions for the diital outputs: N* > Nx; N > Nx; N < Nx ; N = 0; N = N*; Is > Ix ; Is < Ix; T > Tx and T < Tx Where: N = Motor speed; N* = Speed reference; Is = Output Current and T = Motor torque Linear and S type ramps / double ramp Independent acceleration and deceleration ramps Multi-speed function (up to 8 preset speeds) Special resources (Hour meter and Wattmeter) Overlapped PID Reulator (for automatic level, flow, pressure, and weiht control) Direction of Rotation selection (FWD/REV) Local / Remote Operation selection Flyin Start function (restart with a spinnin load) Critical Speed Avoidance (Skip Speed) Ride-Throuh function (operation durin momentary power loss) Built-in Modbus RTU (needs the RS-232 or RS-485 interface) NEMA 4 Remote Keypad (LCD display) Remote Keypad cable (3.3, 6.6, 10, 16, 25 and 35 ft) Remote Keypad frame kit Expansion Boards with special functions Profibus-DP DeviceNet SUPERDRIVE Kit with RS-232 Serial Interface Communication (Drive PC) MVW01 Data is subject to chane without notice. WEG Automation - Products and Solutions A-103

104 MVW01 Frequency Variable Drives MVW-01 Medium Voltae Drive, Transformer, Switchear Prices include transformer Mineral oil filled transformer Product Medium Voltae Drive - 12 Pulse Current Motor MV Drive Dimensions CT VT CT VT H x W x D Weiht MV Size Transformer kva Phase Shiftin Transformer Transformer Dimensions H x W x D Weiht (A) (HP) (in) (lb) (in) (lb) 2300V - 12 pulse MVW T X 95 X MV Drive List Price x46x $225,193 MVW T x 95 x x46x $239,578 MVW T x 95 x x46x $253,782 MVW T x 95 x A x80x $260,541 MVW T x 95 x x80x $266,692 MVW T x 95 x x100x $283,332 MVW T x 95 x x100x $300,723 MVW T x 103 x x100x $359,019 MVW T x 103 x x110x $376,926 B MVW T x 103 x x110x $395,637 MVW T x 103 x x110x $410,119 MVW T X 174 X C x120x $824, V - 12 pulse MVW T x 95 x x46x $237,651 MVW T x 95 x x46x $252,452 MVW T x 95 x x80x $267,239 MVW T x 95 x x80x $271,994 MVW T x 95 x x80x $280,590 A MVW T x 95 x x100x $297,246 MVW T x 95 x x100x $308,040 MVW T x 95 x x100x $327,621 MVW T x 95 x x100x $353,389 MVW T x 95 x x110x $371,354 MVW T x 164 x x110x $530,589 MVW T x 164 x C x110x $626,661 MVW T x 164 x x120x $649,507 MVW T x 233 x $814,980 D MVW T x 233 x Contact WEG $1,100,000 MVW T x 284 x E $1,496,000 NOTES: 1. It is not necessary to use output reactors for motors connected up to 100 meters. Please contact WEG for loner distances. A ASK-4WEG Data is subject chane without notice.

105 Frequency Variable Drives MVW-01 Medium Voltae Drive, Transformer, Switchear, Continued Prices include transformer Mineral oil filled transformer Product Medium Voltae Drive - 12 Pulse Current Motor MV Drive Dimensions CT VT CT VT H x W x D Weiht MV Size Transformer kva Phase Shiftin Transformer Transformer Dimensions H x W x D Weiht (A) (HP) (in) (lb) (in) (lb) 4160V - 12 pulse MVW T x 95 x MV Drive List Price x46x $238,371 MVW T x 95 x x46x $253,327 MVW T x 95 x x80x $268,531 MVW T x 95 x x80x ,324 MVW T x 95 x x80x ,960 A MVW T x 95 x x100x ,756 MVW T x 95 x x100x ,650 MVW T x 95 x x100x ,666 MVW T x 95 x x100x ,401 MVW T x 95 x x110x ,752 MVW T x 164 x x110x ,114 MVW T x 164 x C x110x ,742 MVW T x 164 x x120x ,184 MVW T x 233 x ,980 D MVW T x 233 x Contact WEG 1,100,000 MVW T E 1,486,000 NOTES: 1. It is not necessary to use output reactors for motors connected up to 100 meters. Please contact WEG for loner distances. MVW01 Data is subject to chane without notice. WEG Automation - Products and Solutions A-105

106 MVW01 Frequency Variable Drives MVW-01 Medium Voltae Drive, Transformer, Switchear, CONTINUED Prices include transformer Mineral oil filled transformer MVW-01C Compact to 1000Hp Product Medium Voltae Drive - 18 pulse Phase Shiftin Transformer Current Motor MV Drive Transformer Dimensions WT. Transformer Dimensions H x WT. CT VT CT VT H x W x D kva W x D MV Drive List Price (A) (HP) (in) (lb) (in) (lb) 2300V - 18P COMPACT MVW01 C085 T x 40 x x40x ,103 MVW01 C100 T x 40 x x40x ,240 A MVW01 C112 T x 40 x x40x ,329 MVW01 C125 T x 40 x x40x , V - 18 COMPACT MVW01 C085 T 3300 ESZ X 40 X x46x $205,103 MVW01 C100 T 3300 ESZ X 40 X x46x $215,240 A MVW01 C112 T 3300 ESZ X 40 X x80x $228,329 MVW01 C125 T x 40 x x46x $231, V - 18 pulse MVW01 C070 T4160 ESZ X 40 X x46x $205,868 MVW01 C080 T4160 ESZ X 40 X x46x $215,674 MVW01 C094 T4160 ESZ X 40 X A x80x $228,825 MVW01 C110 T4160 ESZ X 40 X x80x $241,339 MVW01 C120 T4160 ESZ X 40 X x80x $256,215 Notes: 1. It is not necessary to use output reactors for motors connected up to 100 meters. Please contact WEG for loner distances. A ASK-4WEG Data is subject chane without notice.

107 Frequency Variable Drives MVW-01 Medium Voltae Drive, Transformer, Switchear Prices include transformer Mineral oil filled transformer MVW01 Product Medium Voltae Drive - 36 Pulse Current Motor MV Drive Dimensions CT VT CT VT H x W x D Weiht (A) (HP) (in) (lb) 6600V - 36 pulse MVW010058T x 71 x MV Size MV Drive List Price $272,000 MVW010078T x 71 x $287,768 MVW010104T x 71 x C1 $309,439 MVW010124T x 71 x $319,048 MVW010140T x 71 x $334,638 MVW010166T x 138 x $429,767 MVW010188T x 138 x $443,113 MVW010214T x 138 x C2 $464,765 MVW010260T x 138 x $506,648 MVW010288T x 138 x $576,786 MVW010330T x 268 x $805,859 MVW010420T x 268 x $871,486 C3 MVW010495T x 268 x $957,210 MVW010575T x 268 x $1,118, V V MVW010053T x 71 x $272,000 MVW010070T x 71 x $287,768 MVW010094T x 71 x C1 $309,439 MVW010112T x 71 x $319,048 MVW010130T x 71 x $334,638 MVW010150T x 138 x $429,767 MVW010170T x 138 x $443,113 MVW010188T x 138 x C2 $464,765 MVW010235T x 138 x $506,648 MVW010265T x 138 x $576,786 MVW010300T x 268 x $805,859 MVW010375T x 268 x $871,486 C3 MVW010450T x 268 x $957,210 MVW010520T x 268 x $1,118,145 Data is subject to chane without notice. WEG Automation - Products and Solutions A-107

108 Frequency Variable Drives MVW-01 Dimensions and Weiht MVW01 SIZE A SIZE B SIZE C A ASK-4WEG Data is subject chane without notice.

109 Frequency Variable Drives MVW-01 Keypad Functions Starts the drive throuh a controlled acceleration ramp. The display shows alternately the followin data when this key is pressed: rpm Volts Status Torque Hz Amps MVW01 Stops the drive throuh a controlled deceleration ramp. Resets the drive after a fault event. Increases the drive speed or parameter number/settin Decreases the drive speed or parameter number/settin Shows on the display the parameter number or its content (for prorammin purposes) Runs the JOG function (momentary speed impulse) while pressed. Chanes the motor direction of rotation (Forward/Reverse) Selects the drive operation mode (Local or Remote) Confiuration Input Switchear M Main Circuit Breaker or Vacuum Contactor Main Circuit Breaker or Vacuum Contactor 18 Pulse Confiuration 12 Pulse Confiuration Phase Shiftin Transformer Phase Shiftin Transformer Medium Voltae Drive Medium Voltae Drive Medium Voltae Induction Motor M 3 ~ Medium Voltae Induction Motor Data is subject to chane without notice. WEG Automation - Products and Solutions A-109

110 Frequency Variable Drives MVW-01 Superdrive MVW01 Software for Drives Prorammin SuperDrive is a prorammin software for the MVW-01 drives. The software incorporates functions such as: parameters upload and download, drive operation and monitorin, off-line prorammin, and trace function. SuperDrive is a Windows compatible software. The Drive-PC communication uses a RS-232 or a RS-485 interface. Orderin Code MVW T 4160 P O DN Z V 01 - Medium Voltae Variable Frequency Drive MVW-01 Series 02 - Output Rated Current for Constant Torque (CT) 03 - Three-phase Power Supply 0120 = 120 A 0140 = 140 A 0165 = 165 A 04 - Rated Voltae: 2300=2,3kV 3300=3,3kV 4160=4,16kV 0175 = 175 A 0210 = 210 A 0250 = 250 A 05 - Manual Lanuae: P = Portuuese E = Enlish G = Germany S = Spanish 0250 = 280 A 0386 = 386 A 0450 = 450 A 0490 = 490 A 06 - Product Version: S = Standard O = Optional 0560 = 560 A 07 - Enclosure: 00 = Standard (IP41/NEMA 1) 08 - Keypad: 00 = Standard 09 - Dynamic Brakin: 00 = Standard (without dynamic brakin) DB = Dynamic Brakin 10 - Expansion Board: 00 = none A1 = complete EBA board B1 = complete EBB board C1 = complete EBC board 11- Fieldbus Communication Board: 00 = none DN = DeviceNet PD = Profibus DP 12 - Special Hardware: 00 = none H1 = special door and special mountin plate 13 - Special Software: 00 = none 14 - End of code: Z 3300V 4160V 0085=85 A 0070=70 A 0100=100 A 0080=80 A 0112=112 A 0094=94 A 0138=138 A 0110=110 A 0150=150 A 0120=120 A 0160=160 A 0130=130 A 0186=186 A 0162=162 A 0235=235 A 0170=170 A 0265=265 A 0188=188 A 0310=310 A 0250=250 A 0375=375 A 0300=300 A 0500=500 A 0375=375 A 0580=580 A 0475=475 A A ASK-4WEG Data is subject chane without notice.

111 SSW7000 Medium Voltae Soft-Starter The SSW7000 uses state-of-the-art technoloy to provide smooth start / stop control and overload protection for three-phase medium voltae induction motors. Developed to ensure excellent performance, the SSW7000 reduces mechanical shocks from impactin the driven machinery as well as limitin the inrush current demand on your power system. The SSW7000 offers a complete solution for all your applications. SSW7000 Size N SuperDrive G2 Compatible Certifications Data is subject to chane without notice. WEG Automation - Products and Solutions A-111

112 Torque control The SSW7000 features FTC, Flexible Torque Control. This unique WEG technoloy uses vector and direct torque control concepts, based on VFD technoloies developed by WEG. FTC is used to select the desired torque control accordin to the type of load applied to the motor (constant loads, quadratic loads, or loads with lower or hiher startin torque), providin a smooth start with a linear speed ramp durin the entire startin process. All accessories can be easily and quickly installed and identified usin WEG's 'Plu and Play concept Motor voltae: 2.3kV, 4.16kV or 6.9kV Power: 750 hp to 4500 hp Output current: 180A, 300A and 360A Protection Deree: Nema 12 Conformal coated circuit boards SSW7000 Operator interface keypad with raphic LCD display Real time clock Lead break disconnect with viewin window and roundin bar Main and bypass vacuum contactors Medium voltae fuses Power and control optically isolated Flash memory module accessory SoftPLC Function License-free SuperDrive and WLP software USB connection to PC Motor thermal protection - PT100-8 channels (optional accessory) 5 start modes Network communication accessories: Devicenet, Profibus-DP, Ethernet and Modbus, RS-232 or RS-485 Fault lo with time stamp The heatsinks are sized for heavy duty overload cycle. Drawer out thyristor stack assembly for easy installation and maintenance U Power supply voltae Motor voltae t The SSW7000 reduces the voltae applied to the motor durin the start cycle. Consequently, motor current and torque is reduced providin for a smooth start. The motor voltae is controlled by varyin the firin anle of the thyristors in series with the motor. A ASK-4WEG Data is subject chane without notice.

113 Characteristics Plu and play philosophy The installation of accessories is based on WEG s plu-and-play philosophy. Accessories are automatically confiured and reconized upon connection to the SSW7000, ensurin faster and easier maintenance and commissionin. Human Machine Interface HMI (included in the standard product) SSW7000 Slot 2 Temperature sensor module PT100 (accessory) Slot 5 - Flash memory module (accessory) Slot 3 Communication (accessory) Slot 4 Communication (accessory) pictures for illustrative purposes only The SSW7000 enables smooth startin of motors up to rated speed, by lowerin the impact of inrush current on the power supply and by eliminatin the impact of mechanical shocks on the load and the couplin. This helps in reducin maintenance of bearins, couplins, ear boxes, pulleys, belts and chains, in addition to protectin the motor. Data is subject to chane without notice. WEG Automation - Products and Solutions A-113

114 Characteristics Human Machine Interface HMI WEG s keypad naviation is similar to the loic used in cell phones, with the option of sequential or rouped access to control parameters by means of the prorammable soft keys on the display. Keypad is removable and has upload and download capabilities. SSW7000 Riht soft key: function defined by the display Left soft key: function defined by the display Key for scrollin throuh menus and parameters and for modifyin parameter content FWD/REV Selection Start key Local / Remote Selection Stop key Jo key Advantaes Flexible Torque control Overload capacity of 450% for 30 s. (2x / hour duty cycle) Manaement of Demand restrictions by the electric company Bumpless startin Motor protection Mechanical wear reduction Handles lower inrush current limitations of power supply A ASK-4WEG Data is subject chane without notice.

115 Functions Power supply overvoltae and undervoltae and voltae unbalance protection Motor overload and underload prorammable protections Motor thermal protections Selection of prorammable protection between fault or alarm Indication of: motor current per phase, motor current as percent of soft start rated current and as percent of motor nominal current power supply input voltaes per phase motor active and apparent power in kw and kva value of the analo inputs status of the diital inputs and outputs status of the thermal class protection SCR temperature motor temperature (requires usin the accessory module for measurin temperature) hours enerized, hours in operation, hours fan use round fault current or voltae Fault and alarm indication Fault history: value of the 10 last faults date and time stamp of fault occurrence motor current at time of fault power supply voltae at time of fault SSW7000 operatin status at time of fault Start and full duty dianosis: maximum startin current averae startin current real startin time maximum current at full load Power supply maximum and minimum voltae Power supply maximum and minimum frequency durin operation maximum number of starts per hour total number of starts maximum temperature of the SCRs maximum temperature of the motor (requires temperature monitorin) Flexible selection of start and stop control type, enablin: Ramp Voltae, Constant or Ramp Current Limitation, Pump Control and Constant Torque Control, Linear or Quadratic load startin Flexible Torque Control with extremely hih performance Ability to monitor the power supply voltaes via Serial or Fieldbus communication Monitorin and prorammin in raphical mode usin SuperDriveG2 Software Soft PLC allows implementation of PLC software or special operatin versions of SSW7000 soft-starter. SSW7000 Data is subject to chane without notice. WEG Automation - Products and Solutions A-115

116 Applications Chemical, Petrochemical, Oil and Gas Blowers SSW7000 Compressors Cement and Minin Conveyors Steel and Metallury Chippers Suar and Chemical Fans Exhausters Pulp and Paper Pumps Water & Waste Water Manaement Advantaes pictures for illustrative purposes only A ASK-4WEG Data is subject chane without notice.

117 Product Code SSW7000 A 300 T F WEG medium voltae soft-starter 6 - Sinle-Phase Auxiliary Power Supply SSW7000 Series Vac 220 Vac 2 - Frame Size A size A N size N 3 - Rated Output Current 2300 Vca 4160 Vca 6900 Vca 180 = 180 A 180 = 180 A 180 = 180 A 300 = 300 A 300 = 300 A 300 = 300 A 360 = 360 A 360 = 360 A 360 = 360 A 4 - Power Supply T 5 - Rated Voltae Three-phase 2.3 kv 4.16 kv 6.9 kv Specification Size A Power Supply 2300 Vac 4160 Vac 6900 Vac Code Output Rated Current SSW7000 Medium Voltae Soft-Starter Size Protection Deree 7 - Protection Deree N2 8 - Forced Ventilation F Forced (blank) Standard 9 - Special Hardware (blank) Standard 10 - Special Hardware (blank) Standard 11 - Market (blank) IP00 (Kits) (*1) IP41 NEMA 12 Global Note: (*1) Under request Sinle-Phase Auxiliary Motor maximum power (*2) Pricin Power Supply HP kw 220 Vac $52,369 SSW7000A180T A SSW7000A180T Vac $52,875 SSW7000A300T Vac $54, A A IP41 SSW7000A300T Vac $55,876 SSW7000A360T Vac $60, A SSW7000A360T Vac $61,350 SSW7000A180T Vac $61, A SSW7000A180T Vac $62,815 SSW7000A300T Vac $64, A A IP41 SSW7000A300T Vac $65,625 SSW7000A360T Vac $74, A SSW7000A360T Vac $75,621 SSW7000A180T Vac $92, A SSW7000A180T Vac $94,150 SSW7000A300T Vac $110, A A IP41 SSW7000A300T Vac $112,773 SSW7000A360T Vac $140, A SSW7000A360T Vac $142,012 SSW7000 Note: (2*) The motor power rates above are meant for loads with normal overload, e.. centrifual pumps and compressors, based on WEG 4-pole 60-Hz motors. For applications with heavy duty overloads or other more severe conditions, contact WEG s sales force. The dimensionin of the SSW7000 must be calculated based on the information of the load curve, number of starts per hour and load type. Data is subject to chane without notice. WEG Automation - Products and Solutions A-117

118 SSW Specification Size N 2300 Vac 4160 Vac Power Supply Three-phase Accessories SSW7000 Medium Voltae Soft-Starter Output Rated Protection Sinle-Phase Auxiliary Motor maximum power (*2) Code Size Current Deree Power Supply HP kw SSW7000A180T222N2 220 Vac A SSW7000A180T211N2 110 Vac SSW7000A300T222N2 220 Vac A N NEMA 12 SSW7000A300T211N2 110 Vac SSW7000A360T222N2 220 Vac A SSW7000A360T211N2 110 Vac SSW7000A180T422N2 220 Vac A SSW7000A180T411N2 110 Vac SSW7000A300T422N2 220 Vac A N NEMA 12 SSW7000A300T411N2 110 Vac SSW7000A360T422N2 220 Vac A SSW7000A360T411N2 110 Vac Note: (2*) The motor power rates above are meant for loads with normal overload, e.. centrifual pumps and compressors, based on WEG 4-pole 60-Hz motors. For applications with heavy duty overloads or other more severe conditions,contact WEG s sales force. The dimensionin of the SSW7000 must be calculated based on the information of the load curve, number of starts per hour and load type. Reference Description Slot Control accessories to install in Slots 1, 2 and 3 IOE-04 Module for 8 temperature sensors PT100 1 e 2 RS RS-485 serial communication module (Modbus) RS RS-232C serial communication module (Modbus) 3 RS RS-232C serial communication module with switch to proram the microcontroller FLASH memory Anybus-CA Accessories to install in Slots 4 PROFDP-05 ProfibusDP interface module DEVICENET-05 Devicenet interface module ETHERNET/IP-05 EtherNet/IP interface module 4 RS RS-232 interface module (passive) (Modbus) RS RS485 interface module (passive) (Modbus) Flash Memory Module to install in Slot 5 Included in Standard Models MMF-01 FLASH memory module 5 Other Accessories RHMIF-01 Frame kit for MMI (protection rate IP56) - HMI-01 Man Machine Interface MMI (sold separately) (1) TC FT Ground fault CT (1) Consulte manual de Comunicação Anybus-CC. Block Diaram Medium Voltae Power Supply Disconnectin Switch and Fuses Main Contactor CTs Bypass Contactor Power Stack Medium Voltae Motor A ASK-4WEG Data is subject chane without notice.

119 Dimensions Size N (93) SSW (33.3) 1072 (42.2) Power stacks Sizes N Width mm (inch) 1072 (42.2) Heiht mm (inch) 2365 (93) Depth mm (inch) 845 (33.3) Weiht (w/ power stacks) k (lb) 970 (2140) Rated Voltae 2.3 kv 4.16 kv 6.9 kv Width mm (inch) 262 (10.3) 262 (10.3) 262 (1.03) Heiht mm (inch) 772 (28.4) 772 (28.4) 772 (28.4) Depth mm (inch) 430 (16.9) 546 (21.5) 664 (26.1) Weiht k (lb) 53,0 (117) 68.6 (151) 83.3 (184) Standards ANSI/IEEE C37.2 Function/Protection Feature Standard Option 19 Reduced Voltae Startin and Bypass 27 Undervoltae protection 37 Undercurrent protection 46 Phase-Balance Current protection 47 Phase Sequence 48 Incomplete Sequence 50 Instantaneous Overcurrent trip 51 Overcurrent trip 55 Power Factor check 59 Overvoltae 81 Frequency check 86 Lockout Relay - electronic 50N/51G Ground fault detection instantaneous and fault-current 49 & 38 Windin Temperature and Bearin Temperature Data is subject to chane without notice. WEG Automation - Products and Solutions A-119

120 Technical specifications SSW7000 Power Supply Power Voltae (R/1 L1, S/3L2,T/5L3) Low voltae test: 500Vac: (-60% to +10%) or (200 to 550Vac) Models: 2300Vac: (-60% to +10%) or (920 to 2530Vac) 4160Vac: (-60% to +10%) or (2760 to 4576Vac) 6900Vac: (-60% to +10%) or (2760 to 7590Vac) Frequency (50 to 60Hz): (±10%) or (45 to 66Hz) Capacity Maximum number of starts 5 starts in 2 hours (One start every 30 minutes) Start cycle AC-53a; :50-2 Thyristors Medium voltae SCRs per power stack 2300Vac: 2 thyristors per per power stack 4160Vac: 2 coupled pairs of thyristors 6900Vca: 2 coupled trilplets of thyristors Peak reverse voltae on the power stack 2300Vac: 6.5kV 4160Vac: 13kV 6900Vac: 19.5kV Protection Protection by Hardware dv/dt filter Active overvoltae protection on the thyristors Control Supply Control voltae As per code of the SSW7000: 110Vac: (-15% to10%) or (93.5 to 121Vac) 230Vac: (-15% to 10%) or (195.6 to 253Vac) Frequency (50 to 60Hz): (±10%) or (45 to 66Hz) Consumption Continuous: 900 ma Peak: 9.5 A (durin the closin of the vacuum contactors) Control Method Voltae ramp. Current limitation. Pump control. Torque control. Current ramp. Inputs Diital 6 isolated diital inputs, 24 Vdc, prorammable functions Analo 2 differential inputs isolated by differential amplifier; Al1 resolution: 12 bits, Al2 resolution: 11bits + sinal, (0 to 10) V, (0 to 20) ma or (4 to 20) ma, Impedance: 400kQ for (0 to 10V), 500Q for (0 to 20mA) or (4 to 20mA), prorammable functions Outputs Diital 3 NO/NC contact relays, 240 Vac, 1A, prorammable functions. Analo 2 isolated outputs, (0 to 10V) RL ± 10kQ (maximum load), 0 to 20mA or 4 to 20mA RL<500Q, 11-bit resolution, prorammable functions Man Machine Interface Standard 9 keys: Turn/Stop, Increase, Decrease, Rotation Direction, Jo, Local/Remote, riht Soft key and left Soft key. Graphic LCD. Provides access to all parameters. Safety Main protection Under and Overcurrent and current unbalance. Under and Overvoltae and voltae unbalance. Under and Overtorque and Active overpower Phaseloss. Reverse phase sequence Overtemperature in the power racks. Motor overload. Motor overtemperature (optional). External defect. Ground fault by voltae or current. Fault in the power racks. Fault in the power contactors. Faults in the control boards. Faults in the communication networks. Prorammin errors. For further details and more protection implemented, refer to the prorammin manual. Protection IP41/Nema 12 deree Standard panel A ASK-4WEG Data is subject chane without notice.

121 PC connection for prorammin USB Connector USB standard Rev. 2.0 (basic speed). USB plu type B device. Interconnectin Cable: standard host/device shielded USB cable Environmental Temperature -10 a 40 C Conditions Altitude Up to 1000 m above sea level. For hiher altitudes, contact our sales force. Humidity Air relative humidity of 5 % to 90 % non-condensin. Standards NBR IEC Hih voltae controlear and switchear - part 200: Hih voltae controlear and switchear in metal enclosure for voltaes over 1 kv up to and includin 52 kv IEC Hih-voltae switchear and controlear - Part 1: Common specifications IEC Hih-voltae test techniques. Part 1: General definitions and test requirements CISPR 11 Industrial, scientific and medical (ISM) radio-frequency equipament - electromanetic disturbance characteristics - limits and methods of measurement IEC Electromanetic compatibility (EMC) - Part 4: testin and measurement techniques - section 4: electrical fast transient/burst immunity test. Basic EMB publication IEC Electromanetic compatibility (EMC) - Part 4-18: testin and measurement techniques - damped oscillatory wave immunity test NBR IEC Protection rates for electric equipment enclosures (ip code) UL 347 Medium Voltae AC Contactors, Controllers and Control Centers UL 347B Medium Voltae Motor Controllers SSW7000 Data is subject to chane without notice. WEG Automation - Products and Solutions A-121

122 CALL NOW Motors Automation Enery Transmission & Distribution Coatins Coolest Motor Yet: The W22 Three-Phase Motor Enhancin Productivity Since 1961, WEG has been transformin enery into solutions. From IEC/NEMA motors with hiher efficiency and lower total cost of ownership, to a full line of interated automation products, WEG s lobal solutions are backed by 50 years of experience, research, and development. Combine our enineerin talents with quality, reliable products, unparalleled customer based Supply Chain solutions, and best-in-class Customer Service and you ve ot a win-win industry partner. To learn more about WEG products or to locate a Distributor near you, please contact ASK-4WEG or visit Transformin enery into solutions WEG Electric Corp. W22: Our Coolest Motor Yet Meets NEMA Premium efficiency reulations 2010 and beyond. CFW11 Variable Frequency Industrial Drive HP Enclosed Starters Combination and NonCombination CALL NOW