Accessories. channel. Guiding channel aluminum

UNIFLEX 1455/1555 Lighter, quieter, more effective.

UNIFLEX 1455/1555 Lighter, quieter, more effective. INNOVATIONS Lighter, quieter, 2007 more effective. The new generation: UNIFLEX 1455/1555. Lighter, quieter, more effective. New generation new designation

Light, quiet all-rounder with wide range of applications* Simple divider positioning and fastening Many separation options for the cables

A member of the TSUBAKI GROUP Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly high torsional rigidity Universal Mounting

Double-deck terminal block; Through/through terminal block; L/L; gray housing

0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Item No: 870-0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Marking Business data Supplier

ENCODER. Profibus Multiturn. Series , Key-Features:

ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm

ST 4. Extract from the online catalog. Order No.:

Extract from the online catalog ST 4 Order No.: 3031364 Feed-through modular terminal block, Type of connection: Spring-cage connection, Cross section: 0.08 mm² - 6 mm², AWG 28-10, Width: 6.2 mm, Color:

Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,

Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module

UK 5-MTK-P/P. Extract from the online catalog. Order No.:

Extract from the online catalog UK 5-MTK-P/P Order No.: 3004032 Disconnect and test disconnect terminal block, Connection type: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG: 24-10, Nominal current:

PIT 2,5-PE/L/N. Extract from the online catalog. Order No.:

Extract from the online catalog PIT 2,5-PE/L/N Order No.: 3210538 Ground modular terminal block, Type of connection: Leg spring connection, Leg spring connection, Cross section: - 4 mm², AWG 26-12, Width:

Cable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1

Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,

PIT 2,5-TWIN-DIO/R-L. Extract from the online catalog. Order No.:

Extract from the online catalog PIT 2,5-TWIN-DIO/R-L Order No.: 3210253 Feed-through modular terminal block, Type of connection: Leg spring connection, Leg spring connection, Number of positions: 1, Cross

DIK 1,5-LA 24RD/U-O. Extract from the online catalog. Order No.:

Extract from the online catalog DIK 1,5-LA 24RD/U-O Order No.: 2715995 Sensor/actuator terminal block, Cross section: 0.2 mm² - 4 mm², AWG: 24-12, Connection type: Screw connection, Width: 6.2 mm, Color:

Conductor and Cable Marking Description and Handling

Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed

ST 2,5. Extract from the online catalog. Order No.:

Extract from the online catalog ST 2,5 Order No.: 3031212 Feed-through modular terminal block, Type of connection: Springcage connection, Spring-cage connection, Cross section: 0.08 mm² - 4 mm², AWG 28-12,

UK-SI. Extract from the online catalog. Order No.:

Extract from the online catalog UK-SI Order No.: 3118012 Fuse terminal block for cartridge fuse inserts 5 x 20 and 5 x 25, cross section: 0.2 -, width: 8.2 mm, color: black Commercial data EAN 4017918092856

PIT 2,5-TWIN. Extract from the online catalog. Order No.:

Extract from the online catalog PIT 2,5-TWIN Order No.: 3209549 Feed-through modular terminal block, Type of connection: Leg spring connection, Leg spring connection, Cross section: - 4 mm², AWG 26-12,

WAGO product LOCATOR 4.1

Technical data Package size 50 pieces. Cross section from [mm2] 0.08 mm2 Cross section to [mm2] 4 mm2 Cross section from [AWG] 28 AWG Cross section to [AWG] 12 AWG Weight 17.298 g Color green-yellow Wiring

UK 5 N BU. Extract from the online catalog. Order No.:

Extract from the online catalog UK 5 N BU Order No.: 3004388 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG 24-10, Width: 6.2 mm, Color:

Printview: End module for internal data bus extension - Item No.:

Printview: End module for internal data bus extension - Item No: 70-627 End module for internal data bus extension Item No: 70-627 End module for internal data bus extension Marking Business data Supplier

UK 5 N BN. Extract from the online catalog. Order No.:

Extract from the online catalog UK 5 N BN Order No.: 3007330 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG 24-10, Width: 6.2 mm, Color:

MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM

IAB INSTRUCTION MANUAL MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM Required Tools Drill with 5/16 Drill Bit MIDSIZE VEHIGLES M1105 50 [ ] M1100 60 [ ] M1150 72 [ ] M2105 50

Bracket and Mounting Dimensions

INSTALLATION GUIDE NI PS-14/15/16/17 Panel Mount Brackets This document provides the installation procedure for the NI PS-14/15/16/17 Panel Mount Brackets. Use accessory 199432-01 to mount NI PS-14/15/16/17

Section 1 Specialty Profiles

Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel

UDK 4-DUR. Extract from the online catalog. Order No.:

Extract from the online catalog UDK 4-DUR Order No.: 2775207 The illustration shows version UDK 4-DUR 249 Feed-through modular terminal block, Connection type: Screw connection, Cross section: 0.2 mm²

UK 6,3-HESI. Extract from the online catalog. Order No.:

Extract from the online catalog UK 6,3-HESI Order No.: 3004171 Fuse terminal block for cartridge fuse insert, cross section: 0.5-16 mm², AWG: 26-8, width: 10.2 mm, color: black Commercial data EAN 4017918090685

UTME 6. Extract from the online catalog. Order No.:

Extract from the online catalog UTME 6 Order No.: 3047400 Test disconnect terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG: 24-8, Width: 8.2 mm, Color: gray, Mounting

Frontslide 60/A-Telescopic

Frontslide 60/A-Telescopic Patents A lot of motion with a single slide. Hardware for simultaneously sliding up to 4 wood, metal or aluminium shutters of up to 60 kg (132 lbs.). Guides pages Seite 32 Locking

Installer Connectors Overview Suitable for lighting, power, HVAC & other applications

Installer Connectors Overview Suitable for lighting, power, HVAC & other applications 221 Series Compact Lever Connectors 221 Series - 4mm² 0.2-4mm 2 solid & stranded 0.14-4mm 2 fine-stranded 450 V/4 kv/2

Absolute Encoders Multiturn

The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore

SECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS

PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................

Positioning Systems Linear Module

Positioning Systems Linear Module CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 (0)1388 778400 Fax: +44 (0)1388 778800 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk

Robust Clamps Shock-proof load range

Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific

STTB 2,5. Extract from the online catalog. Order No.:

Extract from the online catalog STTB 2,5 Order No.: 3031270 Double-level terminal blocks with a spring-cage connection, cross section: 0.08 mm 2-2.5 mm 2, width: 5.2 mm, color: Gray Commercial data EAN

HIGH DENSITY TERMINAL BLOCKS

CONTROL LOGIC HIGH DENSITY TERMINAL BLOCKS c3controls new line of High Density terminal blocks are both innovative and user-friendly. Available in multiple terminal points from 4, 6, and 12 in a single

Ideal protection for your electrics: häwa cable ducts

Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in

DOK 1,5-2D. Extract from the online catalog. Order No.:

Extract from the online catalog DOK 1,5-2D Order No.: 2717139 Sensor/actuator terminal block, Cross section: 0.2 mm² - 4 mm², AWG: 24-12, Connection type: Screw connection, Width: 6.2 mm, Color: gray,

INSTALLATION INSTRUCTIONS

Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to

UK 6 N. Extract from the online catalog. Order No.:

Extract from the online catalog UK 6 N Order No.: 3004524 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG 24-8, Width: 8.2 mm, Color: gray,

PIT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

Extract from the online catalog PIT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Type of connection: Leg spring connection, Leg spring connection, Cross section: - 4 mm², AWG 26-12,

DIK 1,5. Extract from the online catalog. Order No.:

Extract from the online catalog DIK 1,5 Order No.: 2715966 Three-level initiator terminal block, cross section: 0.2-2.5 mm², AWG: 30-14, width: 6.2 mm, color: gray Commercial data EAN 4017918061715 Pack

UT 6. Extract from the online catalog. Order No.:

Extract from the online catalog UT 6 Order No.: 3044131 Feed-through modular terminal block, Type of connection: Screw connection, Screw connection, Cross section: 0.2 mm² - 10 mm², AWG 24-8, Width: 8.2

T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts

atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements

Products Catalogue I. Mounting runners and components:

I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel

11. Wall and Floor Mounted Clips

11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete

UK 2,5 N. Extract from the CD catalog. Order number:

Extract from the CD catalog UK 2,5 N Order number: 3003347 > https://eshop.phoenixcontact.com/phoenix/treeviewclick.do?uid=3003347 Feed-through modular terminal block, Type of connection: Screw connection,

ColorMaxLP Label Roll Rewinder

ColorMaxLP Label Roll Rewinder 5/2017 INSTALLATION/OPERATOR MANUAL Included: Rewinder Base plate Power supply Power Cord Thumb screws Assembly instructions 1. Install base plate Lift front of printer and

UDK 3-PE. Extract from the online catalog. Order No.:

Extract from the online catalog UDK 3-PE Order No.: 2775456 1-level terminal block with double connection on both sides, cross section: 0.2-2.5 mm², width: 5.2 mm, color: green-yellow Commercial data EAN

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)

KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,

UKKB 10. Extract from the online catalog. Order No.:

Extract from the online catalog UKKB 10 Order No.: 2772077 Feed-through modular terminal block, Cross section: - 16 mm², AWG: 20-6, Connection type: Screw connection, Width: 10.2 mm, Color: gray, Mounting

Standard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible

The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and

Aluminum Telescopic Masts and Accessories

Page 1/6 Aluminum Telescopic Masts and Accessories Example of a 9m aluminum mast with a wind measurement instrument. Model Transport length [m] The telescopic masts are manufactured from sideways slotted

Specifications Operating Speed. Operating Frequency. Insulation Resistance. Contact Resistance. Rated Current/Voltage. Dielectric Strength

Features Galvanically separated contacts Screw terminals with self-lifting clamps for easy wiring Positive Opening of NC contacts Definitions of Operating Characteristics OF F OT TT PT MD OP PO Operating

2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT

2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT B1 1695 2200 0 10 set by hand or by optional RCU (Remote Control Unit) X 65 2-Port Antenna 1695 2200 65 18dBi 0 10 T Type No. 742215V01

Item No.: /

mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter

10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.

10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:

UT 2,5-PE. Extract from the online catalog. Order No.:

Extract from the online catalog UT 2,5-PE Order No.: 3044092 Feed-through modular terminal block, Type of connection: Screw connection, Screw connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

TopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389

opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in

wire guards PLAST D FUSERS FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guards / Fluorescent lighting fixture protection / Product Description:

Wire Guards FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guard units offer an inexpensive way to protect light fixtures from excessive abuse. Wire Guard units can be fabricated to fit most shapes of light

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator

PLC-OSC-120UC/ 24DC/ 2

Extract from the online catalog PLC-OSC-120UC/ 24DC/ 2 Order No.: 2966650 The illustration shows the version PLC-BSC- 24DC/21 PLC interface, consisting of base terminal block PLC-BSC with screw connection

USLKG10 N. Extract from the online catalog. Order No.:

Extract from the online catalog USLKG10 N Order No.: 3003923 Ground modular terminal block, Type of connection: Screw connection, Screw connection, Cross section: - 16 mm², AWG 20-6, Width: 10.2 mm, Color:

crocodiletm Exploded views / Part lists

crocodiletm Exploded views / Part lists Rev-date (0-0) On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually but

UKK 5-TG. Extract from the online catalog. Order No.:

Extract from the online catalog UKK 5-TG Order No.: 3007042 Feed-through modular terminal block, Connection type: Screw connection, Cross section: 0.2 mm² -, AWG: 24-12, Nominal current: 26 A, Nominal

060-Hardware. Clamps and Brackets Hose Clamps

Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

UTI 16-PE. Extract from the online catalog. Order No.:

Extract from the online catalog UTI 16-PE Order No.: 3073830 Installation feed-through modular terminal block, blue, Special and hybrid connection, Cross section: - 25 mm², AWG: 10-4, Width: 12.2 mm, Color:

MPreC - Pressure Relief Device Order specification sheet

- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter

UK 5-HESILA 250. Extract from the online catalog. Order No.:

Extract from the online catalog UK 5-HESILA 250 Order No.: 3004142 The illustration shows version UK 5-HESI Fuse terminal block for cartridge fuse insert, cross section: 0.2-4 mm², AWG: 26-10, width: 8.2

TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability

TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH

UK 10-DREHSI (6,3X32)

Extract from the online catalog UK 10-DREHSI (6,3X32) Order No.: 3005507 The illustration shows version UK 10-DREHSI (5x20) Fuse terminal block for cartridge fuse insert, cross section: 0.5-16 mm², AWG:

Accessories for pluggable interface relays CR-P Sockets

Data sheet Accessories for pluggable interface relays CR-P Sockets Characteristics Logical and standard socket for pluggable interface relays CR-P Snap-on mounting on DIN rail Connector for pluggable function

Multitronic. Technical data

Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:

Frontslide 100/A. Description. Applications. Features of the HAWA-Frontslide 100/A. Patents

Frontslide 100/A Patents Sliding shutters for a functional façade finish. Hardware system for wood, metal or aluminium sliding shutters with a panel weight up to 100 kg (220 lbs.) Guides page 112 Locking

3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions

3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material

Technical data: Pin Spacing

282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,

TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability

TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH

Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable

Ball and Socket Shafts Series 0.800

Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When

UKK 5-DIO/U-O. Extract from the online catalog. Order No.:

Extract from the online catalog UKK 5-DIO/U-O Order No.: 2791032 The illustration shows version UKK 5-DIO/O-U Feed-through modular terminal block, Connection type: Screw connection, Cross section: 0.2

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT

4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710

Data Sheets Wiring Components. Fanning Strips. Guide Rings and Holder. Guide Hooks. Spacer Bars. Dummy Plates. Contact. Christian Jaramillo-Arriagada

Data Sheets Wiring Components Fanning Strips Guide Rings and Holder Guide Hooks Spacer Bars Dummy Plates Contact Fax: 0621 683206777 Fanning Strips Wiring Components For a clear connecting arrangement

Dimensions [16.6] M8x [16.6] [16.6] M12x1. M12x [16.7] M18x1 DP DP DP Bi 2-G12-AP6X-H1141

Sensors Die Protector DP-08-25-08 DP-08-50-08 DP-12-25-12 DP-12-50-12 DP-18-25-18 DP-18-75-18 A2521 A9473 A2519 A9169 A2520 A9527 A B C D E F G H 0.984 [25.0] 1.97 [50.0] 0.984 [25.0] 1.969 [50.0] 0.984

UDK 4. Extract from the online catalog. Order No.:

Extract from the online catalog UDK 4 Order No.: 2775016 1-level terminal block with double connection on both sides, cross section: 0.2-2.5 mm², AWG: 30-10, width: 6.2 mm, color: Gray Commercial data

Pan assemblies and installation accessories

Contents Section 10 Pan assemblies and installation accessories SP&N pan assemblies 124 SP&N door and cover 124 TP&N pan assemblies 125 TP&N door and cover 125 Multiclip busbar and Polybloc 126 Comb busbars

CONCEPT Stainless Steel Wall-Mount Enclosures

CONCEPT Stainless Steel Wall-Mount Finish are unpainted. Door and body have smooth #4 brushed finish. Optional CONCEPT panels are white painted or zinc-plated. Optional NEMA panels are white painted, zinc-plated,

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing

Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing

The max. load current must not be exceeded by the total current of all connected conductors.

Extract from the online catalog PT 2,5-3PV Order No.: 3210512 Multi-level terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: gray, Mounting

Stepper Systems. Chapter Four. Features Machine Specifications And Bid Proposals. Catalog Numbers

Stepper Systems Features Machine Specifications And Bid Proposals Chapter Four Stepper 11x13: Stepper 21x19: Stepper 21x29: Stepper 21x39: Stepper 31x33: Stepper 49x41: Catalog Numbers HX33SBME01201505

M Series Pin and Socket Connectors. RoHS. Ready

M Series RoHS Ready M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard connectors (unloaded),

QTC 1,5. Extract from the online catalog. Order No.:

Extract from the online catalog QTC 1,5 Order No.: 3205019 Quick connection feed-through terminal block, Type of connection: Quick connection, Quick connection, Cross section: 0.25 mm² - 1.5 mm², AWG 24-16,

4Cu-LSA Connection technology

4Cu-LSA technology LSA- technology: Patch panels, Telephone Patch Panels, RJ45, Tera, Office-Patch Panels, Data outlets, surface mounting, flush mount, underfloor, 60 Table of Contents Office DC FTTX Patch

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether

Absolute encoders multiturn

PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these

PRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table

PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z

XS Roof Type Overview

XS Roof Type Installation Overview XS Linked CABLE system ON STEEL ROOF Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an

Drop-Down Launcher Basic Kit -1 Stock No. Description Function List Price LNCH " Drop-Down, I-L Motor Launcher

Drop-Down Launcher Basic Kit -1 LNCH-15-02 1.5" Drop-Down, I-L Motor Launcher Complete w/ Slide and Base Rail, TWO HOSE CLAMPS for NOS & GOX flex lines, AND adapter brackets to mount to 1.0" rail 250.00

A10 Micro Speaker Clamping A10. Micro Speaker Clamping FEATURES

A10 Micro Speaker Clamping Micro Speaker Clamping A10 FEATURES Compact, transportable, multifunctional transducer measurement platform For Micro Speaker, Headphones, Tweeter and any transducer up to 100

DFK-PC 4/ 9-GF-7,62. Extract from the online catalog. Order No.:

Extract from the online catalog DFK-PC 4/ 9-GF-7,62 Order No.: 1840625 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Nom. voltage: 400 V,

Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling

Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover

SVF-A,B,BE,C, SVF-CB, SVFX

LV INUSTRIL P P INXING TL P U -,,,, -, X OTGONL M/ SRIS VIS UP LXIL LIN LV VIS OTHR olumn ata - One irection lamping LV INUSTRIL - i-direction lamping LV INUSTRIL lamping xamples lamping xamples P 1 1