NVE40K Installation Guide
|
|
|
- Lawrence Fitzgerald
- 5 years ago
- Views:
Transcription
1 NVE40K Installation Guide
2 INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL. This symbol is intended to alert the user to the presence of un-insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.! This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 Table of Contents OVERVIEW... 4 PACKAGE CONTENTS... 5 SUBRACK... 6 Specifications... 6 Power Consumption... 6 Unit View... 8 BLADE NVC4000-R NVE4000A-R POWER SUPPLIER UNIT Specifications Unit view Electrical characteristics Environmental characteristics Mechanical characteristics Pin Description FAN UNIT Specifications Unit view Electrical characteristics Environmental characteristics Mechanical characteristics INSTALLATION Ejecting and inserting blades Ejecting a blade Inserting a blade Ejecting and inserting Power Supplier Unit (PSU) Ejecting PSU Inserting PSU APPENDIX (A): DIMENSIONS REVISION HISTORY A.00 UDP Technology Ltd. 3
4 OVERVIEW NVE40K compresses video/audio data and transmits the compressed video/audio data through the network in real time. NVE40K provides a high quality video image with a limited bandwidth and storage capacity. These products are ideally suited for a wide range of surveillance and remote monitoring applications. Main features are highlighted below. 19 / 4U Aluminum Sub-Rack Support up to 10 units of 4CH NVE or NVC Blades (Total 40 D1) Hot-swappable blade, fan unit, and power unit Identification of each Sub-Rack and each blade unit ( for easy and quick maintenance) Temperature Sensor included Detect power supplier unit operation (Self-diagnosing) Detect fan unit operation (Self-diagnosing) Applied device: NVC4000-R40 (NVE40K version after manufacturing date Oct 1st, 2009) NVE4000A-40R (It is the blade version of NVE4000A) 01A.00 UDP Technology Ltd. 4
5 PACKAGE CONTENTS Unpack carefully and handle the equipment with care. The packaging contains: NVE40K i Note The above contents are subject to change without prior notice. 01A.00 UDP Technology Ltd. 5
6 SUBRACK Specifications Power Connector (Each slot) Parameter Construction Applied Device Available Slots Input Type Video Input Audio Input Audio Output Digital Input/Output RS-232C/RS-485 Fan Unit Value Aluminum, 19 / 4U Sub-Rack NVC4000R-40/ NVE4000A-R40 10 ea (Hot Swappable Blades) 85 ~ 264 VAC, 47~63Hz, 2A Dual Power Supply 4 ch (BNC Type) 4 ch (2.5 mm Pitch Terminal Block, Pluggable) 1 ch (2.5 mm Pitch Terminal Block, Pluggable) 4 / 2 ch (2.5 mm Pitch Terminal Block, Pluggable) 1 / 1 ea 10/100 Base-T 1,800rpm x 3ea Temperature 0 ~ 60 (32 ~ 140 ) Humidity Dimension Weight Up to 85% RH 482.6(W) x 177(H) x 322(D) mm 7,420 g (except blades and Power Cable included) Power Consumption Rack case & fan unit (Without blades) Rack case Fan unit(1ea) 32 ma 850 ma Rack case with 1 x NVE4000A-R40 (V1.42)) and no fan unit Input Voltage Current Consumption 12 V 812 ma 9.74 W Rack case with 10 x NVE4000A-R40 (V1.42) and 3 fan units Input Voltage Current Consumption 12 V ma W 01A.00 UDP Technology Ltd. 6
7 Rack case with NVC4000-R40 and 3 fan units Number of Current Temperature NVC Blade PSU x 2 PSU x 1 PSU x 2 PSU x 1 PSU x 2 PSU x W 10.3W 10.1W 9.92W 10.3W 10.2W W 22.4W 26.7W 26.5W 22.9W 22.9W W 34.2W 38.6W 39.5W 35.0W 33.5W W 46.1W 52.2W 51.1W 46.8W 46.6W W 57.5W 60.5W 60.0W 58.8W 58.4W W 69.2W 73.6W 73.0W 70.4W 70.5W W 80.8W 84.6W 84.2W 82.0W 81.2W W 92.7W 95.7W 96.1W 93.6W 93.1W W 103.6W 107.6W 107.9W 105.3W 104.3W W 115.2W 116.5W 118.3W 117.6W 113.4W W 125.7W 125.5W 128.7W 130.5W 125.5W 01A.00 UDP Technology Ltd. 7
8 POWER DC OUT FAN FAN FAN POWER DC OUT USB 1 Ethernet 1 USB 2 Ethernet 2 USB 3 Ethernet 3 USB 4 Ethernet 4 USB 5 Ethernet 5 USB 6 Ethernet 6 USB 7 Ethernet 7 USB 8 Ethernet 8 USB 9 Ethernet 9 USB 10 Ethernet 10 IO1 Vin 1-1 Vin 1-2 Vin 1-3 Vin 1-4 IO2 Vin 2-1 Vin 2-2 Vin 2-3 Vin 2-4 IO3 Vin 3-1 Vin 3-2 Vin 3-3 Vin 3-4 IO4 Vin 4-1 Vin 4-2 Vin 4-3 Vin 4-4 IO5 Vin 5-1 Vin 5-2 Vin 5-3 Vin 5-4 IO6 Vin 6-1 Vin 6-2 Vin 6-3 Vin 6-4 IO7 Vin 7-1 Vin 7-2 Vin 7-3 Vin 7-4 IO8 Vin 8-1 Vin 8-2 Vin 8-3 Vin 8-4 IO9 Vin 9-1 Vin 9-2 Vin 9-3 Vin 9-4 IO10 Vin 10-1 Vin 10-2 Vin 10-3 Vin 10-4 Rx Tx RS-232 DO 1 2 C 1 IO C 2 Ain DI RS-485 Vout Aout RACK ID ON PSU2 PSU1 85~265V AC (47~63Hz) NVC/IPE Series Unit View NVE40K subrack 0 I 0 I < Top view > < Rearview > < Front view > < Rightside view > Rear, top and front view of subrack 01A.00 UDP Technology Ltd. 8
9 USB 10 Ethernet 10 Vin 10-1 Vin 10-2 Vin 10-3 Rx Tx RS-232 IO10 Vin 10-4 IO DI DO 2 4 C C 1 2 RS-485 Ain 3 Reserved 4 1 Aout Detailed rear view of subrack (video, audio, digital input/output, etc.) V~ 50/60Hz PSU2 PSU1 0 I I 0 Detailed rear view of subrack (power cord) RACK ID ON Detailed rear view of subrack (RACK ID) 01A.00 UDP Technology Ltd. 9
10 BLADE NVE40K supports up to ten units of NVC4000-R40 or NVE4000A-R40. NVC4000-R40 NVE4000A-R40 *Models herein and their appearance are subject to change without any prior notice. *NVC Blade is fully compatible with the NVE40K Version after manufacturing date Oct 1st, A.00 UDP Technology Ltd. 10
11 POWER SUPPLIER UNIT Specifications AC/DC Switched Mode Power Supplier Unit (PSU) 19" 3U Rack Mountable, 10HP, DC12V, 150W Unit view Power supplier unit Electrical characteristics Specification for only Power supply Parameter Units Value Nominal Output Voltage V 12 Maximum Output Current A 13 Maximum Output Power W 156 Efficiency(Typical) (*1) 100V AC % V AC % 86 Input Voltage Range (*2) - 85~265VAC(47~63Hz) Input Current(Typical) (*1) A 1.9/0.95 Inrush Current(Typical) - 14A at 100VAC, 28A at 200VAC, Ta=25, Cold Start Power Factor (*1) /0.95 Output Voltage Range V 9.6~14.4 Maximum Ripple & Noise (*3) 0 Ta 60 mv A.00 UDP Technology Ltd. 11
12 -10 Ta 0 mv 180 Maximum Line Regulation (*4) mv 48 Maximum Load Regulation (*5) mv 96 Temperature Coefficient - Less than 0.02%/ Over Current Protection (*6) A 13.6~ Over Voltage Protection (*7) V 15.0~17.4 Hold-up Time(Typical) (*8) - 20ms Leakage Current (*9) - Less than 0.5mA. 0.3mA(Typical) at 100VAC 0.5mA(Typical) at 230VAC - NOTE *1. At 100/200VAC, Ta = 25 and maximum output power. *2. At 100~240VAC(50/60Hz) *3. Measure with JEITA RC-9131A probe, Bandwidth of scope: 100MHz. *4. 85~265VAC, constant load. *5. No load-full load, constant input voltage. *6. Constant current limit and Hiccup with automatic recovery. Not operate at over load or dead short condition for more than 30sec. *7. OVP circuit will shutdown output, manual reset (Re power on). *8. At 100/200VAC, nominal output voltage and maximum output current. *9. Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz). Environmental characteristics Parameter Units Value Operating Temperature (*1) - -10~+60 (-10~+40 :100%, +50 :60%, +60 :20%) Operating Humidity - 30~90%RH (No Dewdrop) Storage Temperature - -30~+85 Storage Humidity - 10~95%RH (No dewdrop) Mechanical characteristics Construction Format: 10HP x 3U compatible Dimension (Unit: mm): 50.8(W) x 128.4(H) x 236(D) Weight (Unit: g): 812 Cooling: Free Air Convection 01A.00 UDP Technology Ltd. 12
13 POWER DC OUT Front, top, side view of PSU Pin Description Mating Connector: DIN61412-H15 Female Pin # Signal Name 4 Output +12V DC OUTPUT 6 8 Sense +V Assorted Signal 10 Sense 0V 12 Output 0V DC OUTPUT NC 18 NC 20 NC 22 NC 24 NC 26 NC 28 AC LINE 30 AC Neutral AC INPUT 32 FG 01A.00 UDP Technology Ltd. 13
14 FAN UNIT Specifications 19 1U rack fixed fan unit Number of DC fans (EA): 3 Unit view Fan Unit Name LED DC Lamp DC Inlet DC Outlet Remarks Fan on & off In power switch DC power input terminal DC power output terminal 01A.00 UDP Technology Ltd. 14
15 Electrical characteristics Parameter Units Value Input Voltage Rated Voltage V DC 12 Operating Voltage DC 6 ~ 13.8 Input Power W 3.60 Maximum Air Flow m3/min 0.63 x 3EA = 1.89 (At Average Value in Free Air) Fan Speed min Environmental characteristics Parameter Allowable Ambient Temperature Range Operating -10~+60 Storage -40~+60 Value Expected Life ,000 Hours (Failure Rate 10%) Mechanical characteristics Mechanical characteristics of fan unit: Dimension Width (inch): 19 " Height (U): 1 U Depth (mm): 270 mm Number of DC fans (EA): 3 01A.00 UDP Technology Ltd. 15
16 INSTALLATION Ejecting and inserting blades Ejecting a blade screw screw 1. Unscrew the screws. 2. Grasp the inject/eject handle of the blade and push it down as shown in above figure. 3. Remove the blade from the rack chassis. Inserting a blade 1. Make sure that the inject handle is in the outward position. 2. Insert the blade into the rack chassis. 3. Grasp the inject handle of the blade and pull it up. 4. Fasten the screws. 01A.00 UDP Technology Ltd. 16
17 Ejecting and inserting Power Supplier Unit (PSU) Ejecting PSU 1. Unscrew the screws. 2. Grasp the inject/eject handle of the PSU and push it down. 3. Remove the PSU from the rack chassis. Inserting PSU 1. Make sure that the inject handle is in the outward position. 2. Insert the PSU into the rack chassis. 3. Grasp the inject handle of the PSU and pull it up. 4. Fasten the screws. 01A.00 UDP Technology Ltd. 17
18 POWE R DC OUT FAN FA N FAN POWER DC OUT 4CH Encode r 4CH Encod er Networ k Rese t 4CH Encod er 4CH Encode r Networ k 4CH Encode r Statu s 4CH Encode r Networ k 4CH Encode r 4CH Encode r Networ Statu k s 4CH Encod er s Rese t 4CH Encod er Rese t NVC/IPE Series APPENDIX (A): DIMENSIONS Statu (Unit: mm) 01A.00 UDP Technology Ltd. 18
19 REVISION HISTORY MAN# DATE(M/D/Y) Comments 01A.00 08/24/2009 Created. 01A.00 UDP Technology Ltd. 19
Rhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
VP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
Model No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
Power Supply. Users Guide PRODUCT MANUAL. WESTELL.COM Westell Technologies MNL rd
PRODUCT MANUAL Power Supply Westell Technologies. 960-1152-MNL rd DISCLAIMER All information and statements contained herein are accurate to the best of Westell Technologies knowledge. Westell Technologies
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, WATTS MEDICAL APPLICATIONS MUI310-A Series
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, 230-310 WATTS MEDICAL APPLICATIONS MUI310-A Series 2MOPP Medical FEATURES Universal Input Range 4000Vac Input/Output Isolation 2 X MOPP Class l Protection
Rhino Redundancy Module PSM24-REM360S. Operating Instructions
Rhino Redundancy Module PSM4-REM360S Operating Instructions RHINO REDUNDANCY MODULE PSM4-REM360S Description With this module and two power supplies of the PSM series (78, 90, 56, 80 and 360 watt models),
APM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
MPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
500Watts Medical Single Output
FEATURES Medical 60601-1 3 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
MPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
The APR YE meets UL/CSA and all international safety requirements. It is SELV. Min Typ Max 90
APR-12-12-YE 12V Output, 12 Watts AC Front End FEATURES Wide input voltage range (9-264VAC) with active power factor correction Active current share Full protection; overvoltage, overcurrent and overtemperature
CompactPCI SYSTEM POWER SUPPLIES. CPCI SERIES 150 to 350 Watts, Ac Input with PFC DPCI SERIES 150 to 350 Watts, 48 Vdc Input FEATURES:
CPCI SERIES 150 to 350 Watts, Ac Input with PFC DPCI SERIES 150 to 350 Watts, 48 Vdc Input FEATURES: EXECUTIVE MEMBER 150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP Fully compliant with PICMG CompactPCI
Output Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
SPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
Constant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
Standards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-Output Wide range input for world-wide use (85 264 Vac). This series is a 2ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
PS2328 Integrated Power. System
PS2328 Integrated Power System 1 Power System consists of: CONTROL / EXPANSION MODULE One rack (Power Supply Housing). Two identical 48V @ 2000W (1+1 redundant) or Two identical 1500W (1+1 redundant) or
Over voltage protection: Output shutdown (V1 only) Weight: 730g
AC/DC Power Supply Multi-Output Wide range input for world-wide use (85 264 Vac). This series is a 2ch output model. Features Wide input voltage range: 85-264Vac 220-370Vdc High efficiency & reliability
Series MPM-815H 150W PFC MEDICAL ATX POWER SUPPLY
50W PFC MEDICAL ATX POWER SUPPLY FEATURES +5V Stand-by and Remote ON/OFF U, 50W convection cooled with ATX Input Active PFC for medical purpose Power good / Power fail signal Thermal protection EN 6060-,
Standards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-output Wide range input for world-wide use (85 264 Vac). This series is a 3ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
The ATF YE meets UL/CSA and all international safety requirements. CE mark is pending. Min Typ Max
ATF-1200-12-YE 12V Output, 1200 Watts AC Front End FEATURES Wide input voltage range (90-264VAC) with active power factor correction 1.64 max. height Active current share with ORing FET 5VDC @ 2A Auxiliary
2U/3U Redundant Power Supply. 400W for IPC-Computer
I-Star Computor Co., Ltd TC-400R2U 400W 2U redundant Professional Power supply Industrial PC, Server, Storage Best Solution Guide 2U/3U Redundant Power Supply 400W for IPC-Computer Model No. TC-400R2U
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A F 150 U S 12 B - Application Package Dimension Output Input Output Output Protection
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
Series AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
FMP VDC RECTIFIER 42 Amps 2000 Watts
FMP20.48 48VDC RECTIFIER 42 Amps 2000 Watts DESCRIPTION The FMP20.48 rectifier incorporates resonant technology to reduce component stresses and provide increased system reliability. The rectifier features
REDUNDANCY MODULE TSP-REM360 AND TSP-REM600
REDUNDANCY MODULE TSP-REM360 AND TSP-REM600 Operating Instructions Seite 1 Dimensions drawings: TSP-REM360 Weight: 0.882lb Gewicht: 0.40kg Seite 2 Dimensions drawings: TSP-REM600 Bottom view Top view Side
Efficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
Typical Input current at 1.15A 0.65A 60 Watt 24VDC / 2.5A. 1.84A 1.0A 120 Watt 24VDC / 5.0A
SmartPower TM The Autotech SmartPower is a DC switching power supply with 24V output Voltage. This user friendly power supply has two 7-segment LED displays for voltage and current monitoring. This DC
3+1 U CPCI Serial System
3+ U CPCI Serial System User s Manual Product Number: 4579-46/47/48/49/40/4/4/43/44 Doc-No: 6397-349_R.0 January 06 R.0 January 06 Initial Release Impressum: Schroff GmbH Langenalber Str. 96-00 75334 Straubenhardt,
40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
Installing the IPS 4345 and IPS 4360
CHAPTER 4 Installing the IPS 4345 and IPS 4360 Contents This chapter describes the Cisco IPS 4345 and the IPS 4360, and includes the following sections: Installation Notes and Caveats, page 4-1 Product
LED Indicator. Class I
FWC100 Series 100 Watt ITE Desktop Power Supply High Efficiency: Level V High Power Density 4.2W/in3 Lifetime Expectation >5 years Hold up Time >48ms at full load Power Factor Correction EISA and CEC Compliant
NI PXIe-1062Q Power Supply Shuttle
USER GUIDE NI PXIe-1062Q Power Supply Shuttle The NI PXIe-1062Q power supply shuttle is a replacement part for the NI PXIe-1062Q chassis. Caution This power supply is not compatible with any other National
The SFP BG meets international safety requirements and is CE marked to the Low Voltage Directive (LVD). Datacom Distributed Power Systems
Ideal server form factor optimizes, space, efficiency, and load variations High efficiency maximized between 30-80% load conditions Unconditionally stable under any load condition Wide input voltage range
Series AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
300 WATT, PFC, OPEN FRAME POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, RMW 300W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. 300 WATT, PFC, OPEN FRAME POWER SUPPLIES RMW 300W SERIES I INTRODUCTION SCOPE OF MANUAL. This instruction manual covers the installation and operation of the
Users Manual. Two Forward Switching Power Supply ZM500/600-LX. Ver
Users Manual ZM500/600-LX Two Forward Switching Power Supply To ensure safe and easy installation, please read the following precaution.s www.zalman.com Ver.130426 1. Warnings and Safety Precautions Warning
4 Bay esata USB 2.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD
4 Bay esata USB 2.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD Product ID: SATDOCK4U2E The SATDOCK4U2E esata and USB 2.0 4-Bay SATA Hard Drive Docking Station is a convenient, timesaving storage
I STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Dual AC Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8A Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1
Datasheet. ACF-10 Series AC/DC Power Module 10W
Datasheet ACF-10 Series AC/DC Power Module 10W The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for
Electrical Specification for: efo Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: CUSTOMER SIZE CAGE CO
Electrical Specification for: efo400-112 Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: 900-4136-0000 GENERAL SCALE RELEASE DATE PRELIMINARY SHEET 1 OF 5 REVISION HISTORY Rev
SFP450-12BG AC-DC Front-End Data Sheet 12V Output, 450 Watts
Features RoHS compliant for all six substances Wide input voltage range (90-264 VAC) with PFC High power density, 9 Watts/cubic inch 1U or 2U height configurations Active current share with ORing FET I
ENGINEERING SPECIFICATION. 40W AC Adaptor. Part Number: PA W1
Engineering Specification ENGINEERING SPECIFICATION 40W AC Adaptor Part Number: PA-1400-26W1 Approval By: A Anson Hsu 2013.04.29 SHEET 1 of 10 Revision History Engineering Specification REV.X01, 2012.07.24
Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma (typ.) ma(typ.) VDC μf % MKW15-12S05M. Output Current Input Current Reflected Ripple
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Range Fully Regulated Output I/O Isolation 40VAC with Reinforced Insulation, rated for 300VAC Working Low Leakage Current < 5µA Operating Ambient
LFWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature 3.37m Hours, Telcordia
VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
AC/DC Power Supply Single Output
AC/DC Power Supply Single Output Open frame type power supply with AC input range 85-132 (-SA) and 170-264V (-SB). Simplified circuit design provides high cost effectiveness. Features Wide input voltage
MPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
RPX Series USER S MANUAL
RPX Series USER S MANUAL INDEX 1.1 Introduction page 1 1.2 Packing page 1 1.3 Drawing page 2~16 1.4 Features page 17 1.5 Specification page 18~21 1.6 Installation & Testing page 22~23 1.7 Hot-Swap Procedures
LFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00
Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down
Watts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
PFE-S SERIES Single Output AC-DC Power Module UL / EN60950 Low Voltage Directive CSA C22.2 No Features Model naming method
PFE-SSERIES 2 29 PFE300S PFE300S Specifications Voltage Range (*2)(*5) V AC85-265 Frequency (*2) Hz 47-63 Input Power Factor (min) (*1)(*5) 0.95 Efficiency (typ) (*1) 81 / 83 83 / 85 Current (*1) A 4.0
12W AC/DC interchangeable Adapter MU012-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
MB2000ERUI. High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers. Key Features:
MB2000ERUI High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers Key Features: 20W Power 4:1 Input Voltage Range EN 60950 Approved 3,000 Isolation Efficiency to 90% Meets EN 55032 Compact 1 x 2
TXP3500/4000 Series AC-DC Industrial PSU
TXP3500/4000 Series ACDC Industrial PSU The TXP3500/4000 series of Fan cooled power supplies convert a universal 3 phase AC I/p to an adjustable, wide range, simple o/p @ 3.5kW. Parallel operation is possible
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
48V 2KW 1U AC-DC Power Supply PS Electrical Specification for: Telkoor Model:
Electrical Specification for: Telkoor Model: 48V 2KW 1U AC-DC Power Supply PS-2048 SCALE RELEASE DATE 26/06/11 SHEET 1 OF 11 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
MSR 2400W. Multi purpose Power System for Telecom and Industrial Applications. Nominal Output Voltage. Voltage Setting Range
MSR 2400W Multi purpose Power System for Telecom and Industrial Applications 2400 W modular system All voltages available 0 144VDC per module U and I adjustable from 0 to max value Hot-swap plug-in modules
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
5W AC/DC interchangeable Adapter MU005-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
Sorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. rms, noise as low as 15mV p-p. 0-5kΩ. 375 600 W 5 300 V 2
NI PXI-1042 POWER SUPPLY SHUTTLE USER GUIDE
NI PXI-1042 POWER SUPPLY SHUTTLE USER GUIDE Introduction Unpacking The NI PXI-1042 power supply shuttle is a replacement part for the PXI-1042 chassis. To minimize downtime caused by a power-supply failure,
Output Amps Model Number Output Voltage (max), (Note 2) Load Reg (max) Ripple & Noise pk-pk Efficiency typ.
Universal 90-264VAC Input High Efficiency Improved EMI Performance 3000VAC Isolation Single, Dual and Triple Outputs Full Safety Approvals As Small as 2.36 W x 3.41 L x 0.93 H (Single Output) Output Amps
LFMWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Approval to EN60601 3 rd Edition Efficiencies upto 94% -40 to 70 degree operating temperature* Dual fusing 12V / 0.5A Fan Output,
FMPe30.48G 48VDC RECTIFIER 60 Amps 2900 Watts
FMPe30.48G 48VDC RECTIFIER 60 Amps 2900 Watts DESCRIPTION The FMPe30.48G rectifier incorporates resonant technology to reduce component stresses, providing increased system reliability and a best-in-class
The 2U package makes the unit suitable for using in workstations, storage systems, racks for industrial and many other applications.
The TXP3500/4000 series of fan cooled power supplies convert the universal 3 phase AC line to an adjustable, wide range output at 3.5/4 kw and a 12 V standby output. Thanks to active current share system
ENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA P1
ENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA-1900-32P1 EFFECTIVE DATE : Nov. 26, 2012 MODEL: PA-1900-32P1 SPECIFICATION REV :B PAGE 1 OF 13 REV. ITEM DESCRIPTIONS OF CHANGE CHANGED REF.
-AC Input- Voltage/Current...AC V, 47-63Hz, 5.5A Max, 1 Phase. Fusing...AC 6.3A, 250V internal line fuse provided, non-user serviceable. Power F
1580 North Kellogg Drive Anaheim, Calif. 92807 Phone: (714) 917-0749 Fax: (714) 917-0786 HTL MODEL SERIES 200W 400W, Single and Multiple Outputs Features: 1 U High Hot Swap Power Supplies N + 1 Redundant
PRODUCT SPECIFICATION File: EA-A0601HE-12 Model: SSA-0601HE-12 Date: Apr. 17, 2015
SWITCHING POWER SUPPLY Rev.: A0(+12V/5A) Page: 1 of 5 1.0 Introductions: 2 2.0 AC Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 AC Inrush current:
NI PXI-1042 Series Power Supply Shuttle
USER GUIDE NI PXI-1042 Series Power Supply Shuttle Introduction Unpacking The NI PXI-1042 Series power supply shuttle is a replacement part for the NI PXI-1042 Series chassis. To minimize downtime caused
Prisma II Platform. Optoelectronics
Optoelectronics Prisma II Platform Description In optical transmission systems, the network platform forms the foundation of the product family. The Prisma II platform provides network operators with the
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
SWT SERIES. Features. Model naming method SWT Applications. Conformity to RoHS Directive. Product Line up. Triple Output 30W - 100W SWT A-273
SERIES Triple Output 30W - 100W 65 100 30 40 Features CE marking applicable 100V/200V worldwide-applicable input / Multiple outputs / Super low cost type Applicable to consumer products such as bill discriminator
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)
WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,
Series AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
Series AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
KS15. Output Current Model Output Current Model Output Current Model 5V 1.0A KS A KS A KS V 0.45A KS A KS
// SERIES Dual Output C/DC Converter 5W-15W 1 15 10 15 5 15 10 Single Output 5 C/DC Converter 5W-15W 1 5 10 Single Output C/DC Converter 5W-15W 1 Features On board type C/DC converter, making full use
CSPS-6K (Shelf Type) POWER you need POWER SHELF
CSPS-6K (Shelf Type) REV: 081418 SHELF PRODUCT FEATURES: Hot pluggable n+1 Redundancy Controlled, measured and reported by TCP/IP Modular design for accommodating high power applications 19 Inch Rack Mount
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
48V 1.5KW 1U AC-DC Power Supply Electrical Specification for: Telkoor Model: 0/ 7 SHEET 1 OF 1
Electrical Specification for: 48V 1.5KW 1U AC-DC Power Supply Telkoor Model: 900-1548-0000 0/ 7 SHEET 1 OF 1 REVISION HISTORY Rev Level A B Rev Date Change Made Reason for Change Effective Approved 22/06
< 50 A max. (115 VAC) / < 70 A max. (230 VAC)
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
Rack Mount LCD KVM Assembly. Installer/User Guide
Rack Mount LCD KVM Assembly Installer/User Guide Rack Mount LCD KVM Assembly Installer/User Guide Avocent, the Avocent logo and The Power of Being There are registered trademarks of Avocent Corporation
Sorensen SG Series kw V A. Programmable Precision High Power DC Power Supply
Sorensen SG Series Programmable Precision High Power DC Power Supply High Power Density: up to 15 kw in 3U, 30 kw in a 6U chassis Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kw Fast Load Transient
Sorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. Near Linear
DIN Rail. user manual Models , & INT /503556/ UM
DIN Rail Power Supply user manual Models 503549, 503556 & 503563 INT-503549/503556/503563-UM-0208-01 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS DIN Rail Power Supply, Model 503549 (45 W
RoHS APPROVAL SHEET 15V/2.0A SERIES NO. (M04) EA1030CU CUSTOMER CUSTOMER P/N DESCRIPTION EDAC MODEL DATE REVISION 0 APPROVED DESIGN PREPARE
APPROVAL SHEET CUSTOMER CUSTOMER P/N DESCRIPTION EDAC MODEL 15V/2.0A SERIES NO. (M04) EA1030CU DATE 2013-04-01 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP D SIGNATURE:
ENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
Electrical Specifications. Input Current 115 VAC: 1 A max. 230 VAC: 0.5 A max.
MLP75 Medical Features 3 x 2 x 1 Inches Form factor 75 Watts Convection Approval to EN60601 3 rd Edition Efficiencies upto 93% -40 to 70 degree operating temperature Dual fusing Thermal Shut-Down feature
3000W Programmable Single Output AEK AEK AEK AEK
000W Programmable Single Output Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (0% ~ 05%) High power density 6.W / inch³ Forced current sharing
Over voltage protection: Output shutdown Weight: 73g
AC/DC Power Supply Single Output The BW-series is an open frame board with an optional cover. Simplified circuit design enabled cost optimisation and miniaturization. Safety design is applied to UL, CUL
Installation Job Aid for VSP 4450GTX-HT- PWR+
Installation Job Aid for VSP 4450GTX-HT- PWR+ Notices Release 6.1.0.0 NN46251-305 Issue 02.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs