X-Stick-12 USER INSTRUCTIONS PRODUCTION DESCRIPTION

Transcription

1 X-Stick-12 USER INSTRUCTIONS PRODUCTION DESCRIPTION X-Stick is a simple 12 SMD RGB LEDs strip lighting fixture and controlled by technology. With the latest SMD technology, its clear transparent and high light plastic case, compact profile and slim design, X- Stick is available in mounting on fix stand and wall mounting. Additionally, the X-Stick can also be programming and set through a LED Setup Tool. Up to 16,000,000 color effects and color changing modes can be created. RGB, C&B and COLOR modes are for Slave Control. AUTO mode and MANUAL mode are for Master Control. In the Master Control, use can use master X-Stick to driving up to 20pcs your Slave. A system connection should be set up before operation. decoration and entertaining applications. It is great for advertisement signs, architecture TECHNICAL SPECIFICATIONS COLOR RESOLUTION COLOR RANGE LIGHT SOURCE SOURCE LIFE VIEWING ANGLE OPERATION VOLTAGE POWER REQUIREMENT VIEWING ANGLE POWER CONSUMPTION HOUSING ENVIRONMENT CONTROL CONNECTION OPERATING TEMPERATURE SIZE NET WEIGHT ACCESSORY 24 Bit (RGB) 16.7 million of additive RGB colors with variable intensity 12 SMD RGB LEDs, Ultra Bright LED(Light Emitting Diodes) 50,000 hours under normal operating condition 120deg, 3A Max. Class 2 Power Supply Unit Only 120 deg Master:3W (120mA)/Slave:2.4W(100mA) Clear transparent diffuser, PC +UV resistance Indoor only X-Stick(Master) is controlled by 512 protocol (for further information, please refer to the product accompanying manual) Terminal(power/data interface) Range -20 degc ~ +50 degc 346(L) x 23(W) x 23(H)mm 200g Power/data Extension cable(x1pcs) per X-Stick(Master) PHYSICAL DIMENSIONS NOTICE: All rights reserved! Specifications and improvement in the design of the unit and this manual are subject to change without prior notice. -1-

2 TECHNICAL DRAWING Clear transparent diffuser Power/data Input Power/data Output / SMD RGB LEDs MOUNTING Directly mounting on Wall 206mm M3x25 screw -2-

3 TECHNICAL DRAWING-Power Supply Unit Connection Class 2 Power Supply Unit (, 6.5A Max.) One Power/Data Extension and one Power Supply Unit can connect up to 25pcc units max. -3-

4 TECHNICAL DRAWING-SYSTEM CONNECTION DIAGRAM Power/Data Booster (built-in PSU of 100 ~230vAC Input, DC24v 6.5A Max. Output) Power In In Or Controller A LED Setup Tool (XB-R1) A capacity of up to 20pcs Slave can be driven per Master! -4-

5 OPERATION GUIDE(PROGRAMMING) A LED Setup Tool (depicted here) _XB-R1 is required to program the X-Stick(Master). For further information, please refer to its accompanying manual. 1. Slave Control In Slave control, Address setting ( 001~512) and Glide effect function can be set through a LED Setup Tool(sold separately). In RGB, C&B and COLOR mode, relevant controls are as below: (1)In RGB mode: (2)In C&B mode: (3)In COLOR mode: NOTE: 1. The Glide Effect function can be switched on(yes) or off(no). The transition from one level to another is smoother when this function is switched on. 2. When this function is switched off, the lighting intensity will changed from one level to another abruptly.(thus, when a quick lighting effect is required, the Guide Effect function should be switched off.) 3. If the signal is interrupted, the driver will keep the last received signal(information) until the driver is switched off or a new and valid signal is sent. 2.Master Control Red color effect is controlled by Channel 1. Green color effect is controlled by Channel 2. Blue color effect is controlled by Channel 3. Color effect is controlled by Channel 1. Brightness is controlled by Channel 2. Color effect is controlled by Channel 1. Brightness(lighting intensity) is always in 100% level. AUTO mode and MANUAL mode are for Master Control. Relevant functions are as below: (1) AUTO mode: Preset programs:1-10 programs and "AUTO" program ("AUTO" program is the sequential running of these1-10 programs.) Auto Speed: 1~100. Auto Fadetime: 0%~100%. (2) MANUAL mode: A LED Setup Tool(XB-R1) (Sold separately) BLUE/Duration: 0%~100%. RED/Speed: 0%~100%. GREEN/Dimmer: 0%~100%. NOTE: 1. The LEDs will turn red in Slave Control mode. The LEDs will give responding sensitive when the parameters are adjusted in Master Control. 2. If the LED is not selected in "Setup with answer", it will turn red. If the LED is not selected in :Setup no answer", it will switch off. When the user confirms the settings of the LED products, the LEDs will flash momentarily to confirm that the setting have been saved. -5-