NPHL TRAINING ROOM EQUIPMENT LIST. 1 - Network Laser Printer with minimum specifications as follows:

Size: px

Start display at page:

Download "NPHL TRAINING ROOM EQUIPMENT LIST. 1 - Network Laser Printer with minimum specifications as follows:"

Esther Allison
6 years ago
Views:

1 NPHL TRAINING ROOM EQUIPMENT LIST 1. PROCUREMENT OF COMPUTER EQUIPMENT LOT I: Computer Hardware and Software 1 - Server with minimum specifications as follows: 2 Intel Pentium IV Xeon processors at 3.0 GHz; 133 MHz front side bus; 64KB level 1; 2 MB level 2 cache; 1 Gb ECC DDR-RAM memory; 16 DDR Memory sockets; 4 X 32 GB, (Ultra160) SCSI(15,000 RPM); SCSI Controllers; Integrated dual-channel Ultra3 (Ultra160)SCSI Adaptec; Dual Channel Expandable RAID Controller, Version 3, 40/80GB DAT tape drive with One Button Data Recovery (OBDR); 10 Blank DDS 4 Backup tapes; 1 tape cleaning cartridge; Six Hot pluggable Hard Drive Bays; 2 x 10/100/1000 (Cat 5 Copper Cabling) NICs; 56K internal modem; Full-tower Chassis; Hot-pluggable; Three standard 320W, 110/220 Volt redundant hot-pluggable power supplies; 17 Monitor; Windows Keyboard; Mouse; Microsoft Windows 2003 Server installed; Microsoft Windows 2003 Server CD. LOT II: Computer Hardware and Software 13 - Personal Computers with minimum specifications as follows: ATX Mid Tower Case; 2.8 GHz Intel Pentium IV processor; 256 MB P-133 DDR Memory; 40 GB IDE Hard Disk; 48X CD/RW-ROM Drive; AGP 32MB Video Card; 3 ½ 1.44 MB Floppy Drive; Network Card (10/100/1000 Ethernet); 56K Data Fax Voice Modem; 17 Monitor; Windows Keyboard; Mouse; Microsoft Windows XP Professional installed; Microsoft Windows XP Professional CD. LOT III: Computer Hardware and Software 1 - Network Laser Printer with minimum specifications as follows: Network Laser Printer Mandatory Requirements Service Standard / Indicator Interface/ Connectivity Centronics, IEEE compliant bidirectional parallel port and cable, USB connectivity card and cable (hot port), Ethernet Network Interface port, 10/100 BaseTX Laser Print Server Ready Network Protocol Support TCP/IP and NetBios Print Speed > 25 ppm (letter) paper Output Resolution > 1200 x 1200 dpi, Ret Random Access Memory Printer and Documents Language Support Input Tray Capacity Duty Cycle/Month Media Sizes > 32 MB (expandable to 80 MB) PCL 6 and Adobe Postscript Level 2 > 250 Sheets 10,000 pages Letter, legal, A4, index card, No. 10 envelopes, Monarch envelopes

2 Media Types Supported Plain Paper, Labels, Envelopes and Transparencies I/O Switching Automatic Number of Trays Supported > 2 Two Side Printing/Sorting No Auto Self-Check Yes Warranty One year onsite labor and parts (Next Business Day) 3-10/100/1000 Switches with the following specifications: 24 fixed auto sensing 10/100/1000BASE-T ports, 100BASE-FX port; 1 expansion slot; Full-rate, no blocking switching on all Ethernet ports; full/half duplex auto negotiation and flow control; 802.1IQ VLAN support, 802.1p and multiplayer traffic prioritization; Layer 3 switching supports OSPF, IP unicast routing; RIP/RIPv2 support; ARP, ICMP, CIDR, UDP Helper, IP multinetting and access control lists; Web interface management, command line interface management, SNMP management; addressable interface. Computer Software as follows: Microsoft Office XP Pro SA OLP NL GOV. 1 Microsoft Windows XP Pro CD. Symantec Norton Ghost 9.0 Symantec Anti-Virus 9.0 Corporate Edition 25 User Pack LOT IV: Supply 1-22 Pivot wall mounted rack cabinet Available with key locked front and rear doors; Vented side panels; Pivoting center section for easy access. LOT V: 1 - Uninterruptible Power Supply (UPS) Supply 5 KVA UPS; True On-line Operation; Static Bypass; RS232 Communications Port SNMP Compatible; Less than 5% Reflected Input Current THD; LCD Display Pane with Emergency Power OFF (EPO); 50/60 Hz Frequency Compatibility; 115/240 Volt output; Ethernet RJ45 port.

3 2. PROCUREMENT OF OFFICE EQUIPMENT GOODS TO BE PROCURED QTY Description 6 60 x 30 Desk with privacy partition at front 1 48 x 30 Desk with privacy partition at front 13 Keyboard trays 13 Task chairs with wheels, tilt and swivel 13 Task chairs with arms, wheels, tilt and swivel 1 8 x 4 white board 1 4 Drawer locking filing cabinet (letter size) 1 Overhead projector with extra bulb 1 70 x 70 ceiling mountable projection screen 12 Dry erase markers 20 Reams LS copy paper 2 50 packs laser printer transparency 4 Flip chart pads 1 Laser pointer MB floppy diskettes 3. PROCUREMENT OF SEMINAR ROOM RENOVATIONS Item Description Quantity Unit Rate Total 1 Supply and install an accordion-style office partition dividing the room into two distinct rooms. The partition should provide a secure separation between the two new areas and should be easily 242 S.F. opened and durable through many repeated openings. 2 Supply and install solid partition above an below counter next to accordion style office partition. 25 S.F. 3 Cut out 8 foot portion of existing counter to allow access to white board. 8 F.R. 4 Securely hang an 8 x 4 foot white board on wall. Job 5 Supply and install opaque vertical PVC blinds in two windows in training room area. 86 S,F, 6 Convert existing light switch to two 2-way light switch one on either side of new partition. Job Item 7 Supply labour and materials to install a Liebert 6 KVA Uninterruptible Power Supply (UPS) into the existing 415 Volt building supply on its own breaker and terminated through an isolation switch. Output of UPS is to be terminated in a 12 way 220 volt electrical panel with nine 15 amp breakers to designated workstation sites. Each workstation table must be on a separate breaker and the printer and server should each be on separate breakers. Job

4 See further details of Liebert 6 KVA UPS in appendix Supply and install 6 new electrical power poles next to desks in training room. These must have both power and network terminations. (110 volt 6 No. outlets and Cat5e RJ-45 data outlets) See appendix 2.2 type of poles expected to be supplied. 8 Supply and install power cables to run from Liebert UPS up wall and along ceiling and down through electrical power poles terminating in new electrical 1050 F.R. outlets. Cables must be enclosed in plastic trunking or conduit. 9 Supply and install power cable to run from Liebert UPS to two new outlets at front of training room 20 F.R. area and to location of new laser printer. 10 Install a pivot 22 wall mounted rack network cabinet on wall of training room. Job 11 Supply and install a 24 port Cat 5e patch panel which is 19 rack mountable and support both 568A and 568B installation. Patch panel is to be 1 No. mounted in the wall mounted rack cabinets mounted as per item number Supply and install Cat5e UTP cable from patch panel in wall cabinet through to electrical power poles terminating in double Bix connection RJ-45 outlet. Each electrical pole will require two Cat5e 1200 F.R. cables and outlets. Cables must be enclosed in plastic trunking or conduit. 13 Supply and install Cat5e UTP cable from patch panel to double Bix RJ-45 outlets at front of training room area. Cables must be enclosed in 10 F.R. plastic trunking or conduit. 14 Supply and install Cat5e UTP cable from patch panel to two double Bix RJ-45 outlet at printer location. Cables must be enclosed in plastic trunking or conduit. 10 F.R. Supply the following Cat5e patch cables: ten one-foot (10 1 ) cables 15 ten three-foot (10 3 ) cables Prov. $15000 ten seven-foot (10 7 ) cables five ten-foot (5 10 ) cables 16 Supply 8 foot length of rubber cable protector Patch all unnecessary holes, sand prime and paint all walls and trim. Prov. $ Supervision 20% 19 Total Cost for Seminar Room Modifications $

6 4. ELECTRICAL GOODS FOR TEMPORARY POWER CONNECTIONS Description Qty Unit Unit Price 30 Amp OCCO Cord 3 Core 30 Amp 100 ft Handy Boxes 8 each 110 V three pin outlets 8 each Plastic face plates for above 8 each Red 30 Amp single wire 25 ft Black 30 Amp single wire 25 ft 30 Amp single pole clip in breaker 1 each Bonding nipples 20 each 6 Outlet power bars 8 each Six foot 15 Amp extension cords 7 each Cat 5e Network Cable 1000 ft RJ-45 Modular Plug Assy 50 each Extended Price Total

ANNEX II + III : TECHNICAL SPECIFICATIONS + TECHNICAL OFFER

ANNEX II + III : TECHNICAL SPECIFICATIONS + TECHNICAL OFFER Contract title : Supply, delivery, unloading and installation of Equipment for the National Health Management Information System Publication