TYPE APPROVAL CERTIFICATE

Transcription

1 TYPE APPROVAL CERTIFICATE Certificate No: TAA00000AS Revision No: 3 This is to certify: That the Peripheral Equipment with type designation(s) UniOP(TM) etop Series 500 and 600 Issued to Exor International S.p.A. San Giovanni Lupatoto VR, Italy is found to comply with DNV GL rules for classification Ships Application : Location classes: Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. Temperature A Humidity B Vibration A EMC B Enclosure C / IP66* (front), IP20 (rear) * IP69K only etop507g, etop507mg, etop510g and etop515g This Certificate is valid until Issued at Hamburg on DNV GL local station: Venice for DNV GL Approval Engineer: Marco Rinkel Joannis Papanuskas Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 1411a Revision: Page 1 of 7 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

2 Product description UniOP TM etop Series 500 and 600 HMI panels. Power supply voltage: 24 Vdc. Operating System: Microsoft Windows CE 6.0 Model name etop504 etop506 etop507 etop507g etop507m etop507mg etop510 etop510g Description TFT color display - 480x272 pixel resolution, 64K colors - Standard Compass Safe Distance: 35 cm - Steering Compass Safe Distance: 20 cm TFT color display, LED backlight - 320x240 pixel (QVGA) resolution, 64K colors - Standard Compass Safe Distance: 35 cm - Steering Compass Safe Distance: 20 cm - Steering Compass Safe Distance: 25 cm - Projectied Capacitive Touchscreen (PCT) - ARM Cortex-A8 1Ghz - Steering Compass Safe Distance: 25 cm - Projectied Capacitive Touchscreen (PCT) - ARM Cortex-A8 1Ghz TFT color display, LED backlight - 800x600 pixel resolution (SVGA), 64K colors - Standard Compass Safe Distance: 60 cm - Steering Compass Safe Distance: 40 cm TFT color display, LED backlight x800 pixel resolution (SVGA), 64K colors - Projectied Capacitive Touchscreen (PCT) - Standard Compass Safe Distance: 125 cm - Steering Compass Safe Distance: 80 cm Form code: TA 1411a Revision: Page 2 of 7

3 etop512 etop513 etop515 etop515g etop605 etop607 etop607m etop TFT color display, LED backlight - 800x600 pixel resolution (SVGA), 64K colors - Standard Compass Safe Distance: 25 cm - Steering Compass Safe Distance: 15 cm TFT color display, LED backlight x800 pixel resolution (WXGA) 64K colors - Steering Compass Safe Distance: 15 cm - 15 TFT color display, LED backlight x768 pixel (XGA) resolution, 64K colors - Standard Compass Safe Distance: 55 cm - Steering Compass Safe Distance: 30 cm - 15 TFT color display, LED backlight, high brightness x768 pixel (XGA) resolution, 64K colors - Projected Capacitive Touchscreen (PCT) - Standard Compass Safe Distance: 55 cm - 5 TFT color display, LED backlight - Standard Compass Safe Distance: 60 cm - Steering Compass Safe Distance: 40 cm - Steering Compass Safe Distance: 30 cm - Steering Compass Safe Distance: 30 cm TFT color display, LED backlight x800 pixel resolution (WXGA) 64K colors - Standard Compass Safe Distance: 30 cm - Steering Compass Safe Distance: 20 cm MODEL NAME Model name can be followed by 1 or 2 or 3 characters. BRANDING EXOR INTERNATIONAL S.p.A. is the manufacturer. EXOR INTERNATIONAL S.p.A. is not written in the technical data labels. The name written in the technical data label is UniOP or EXOR. 500 Series Part number ETOP5aa(M)XYPZ, where: ETOP5aa(M) = Model name (without G suffix even if it is included in the MODEL NAME) X = one or two digit - any letter or number (brand) Y = one digit if Model name is with G suffix: fixed only 5, otherwise only 1 or 2 or 3 or 4 (front) P = one digit - fixed only P for conformal coating machine Z = one digit - any letter or number (customization) Form code: TA 1411a Revision: Page 3 of 7

4 600 Series Part number ETOP6aa(M)XYPZ, where: ETOP6aa(M) = Model name X = one or two digit - any letter or number (brand) Y = one digit - fixed only 5 (front) P = one digit - fixed only P for conformal coating machine Z = one digit - any letter or number (customization) Rugged Controller Module name NA30 Description - ARM Cortex-A8 1Ghz Part number: NA30N001 OPTIONAL MODULES with brand EXOR Module name PLCM01 PLCM05 PLIO03 PLIO06 Description CAN Interface - DB9 CAN connector CODESYS Module - designed to activate the CoDeSys run-time in the HMI Multifunction I/O Module - 20 Digital Inputs configurable as counter/encoder channels - 12 Digital Outputs - 8 Analog Inputs configurable for voltage, current or temperature measurement - 1 PT100 input for cold junction compensation of thermocouples - 4 Analog Outputs configurable for voltage or current PLIO06 Compact I/O Module - 8 Digital Inputs - 6 Digital Outputs - 1 Relay Output MODULE NAME Module name can be followed by 1 or 2 or 3 or 4 or 5 characters Part number: PLaannXYPZ, where: PLaann = Module name X = one or two digits - any letter or number (brand) Y = one digit - any letter or number P = one digit - fixed only P for conformal coating Z = one digit - any letter or number (customization) Application/Limitation The Type Approval covers hardware listed under Product description. When the hardware is used in applications to be classed by DNV, documentation for the actual application is to be submitted for approval by the manufacturer of the application system in each case. Reference is made to DNV Rules for Ships Pt.4 Ch.9 Control and Monitoring Systems. Form code: TA 1411a Revision: Page 4 of 7

5 Product certificate If specified in the Rules, ref. Pt.4 Ch.9 Sec.1, the control and monitoring system in which the above listed hardware is used shall be delivered with a product certificate. For each such delivery the certification test is to be performed at the manufacturer of the application system before the system is shipped to the yard. The test shall be done according to an approved test program. After the certification the clause for application software control will be put into force. Clause for application software control All changes in software are to be recorded as long as the system is in use on board. The records of all changes are to be forwarded to DNV for evaluation and approval. Major changes in the software are to be approved before being installed in the computer. Form code: TA 1411a Revision: Page 5 of 7

6 Type Approval documentation Form code: TA 1411a Revision: Page 6 of 7

7 Tests carried out For the bridge mounted components the Compass safe distance was measured according to section 11.2 of IEC th edition (2002). Marking of product Brand name: As listed under Product description - Brand is UniOP or EXOR Model name and part number: As listed under Product description Serial number: Unique for each delievered item Minimum safe distance: As listed under Product description Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no alterations are made to the product design or choice of systems, software versions, components and/or materials. The main elements of the assessment are: Ensure that type approved documentation is available Inspection of factory samples, selected at random from the production line (where practicable) Review of production and inspection routines, including test records from product sample tests and control routines Ensuring that systems, software versions, components and/or materials used comply with type approved documents and/or referenced system, software, component and material specifications Review of possible changes in design of systems, software versions, components, materials and/or performance, and make sure that such changes do not affect the type approval given Ensuring traceability between manufacturer s product type marking and the type approval certificate Periodical assessment is to be performed at least every second year and at renewal of this certificate. END OF CERTIFICATE Form code: TA 1411a Revision: Page 7 of 7