DNV BUSINESS ASSURANCE
|
|
- Milo Stuart Banks
- 5 years ago
- Views:
Transcription
1 DNV BUSINESS ASSURANCE PRODUCTION QUALITY MANAGEMENT CERTIFICATE - EC Certificate No CE-USA-ACCREDIA This certificate consists of 3 pages. This is to certify that the quality management system of Flow Management Devices, LLC 5225 S 37th St Ste Phoenix AZ - USA for production and final product inspection/testing of Pressure Accessory - Prover has been assessed with respect to the conformity assessment procedure described in annex III (module D) of Directive 97/23/EC on pressure equipment, as amended, and found to comply. Further details are given in the following pages. This certificate is valid until Place and date Vimercate (MB), for the Notified Body 0496 DNV GL Business Assurance Italia S.r.l. Giovanni Cortesi Technical Reviewer Nicola Privato Management Representative Page 1 of 3
2 Certificate No CE-USA-ACCREDIA Jurisdiction Application of Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council and Decreto Legislativo No. 93 of 25 February Certificate history Revision Description Issue date 00 Original certificate Products covered by this certificate The approved system is valid for products covered by the following type examination certificate. Product name Prover Models 001, 003, 007, 015, 025, C25, 035, A35, 045, 060, 090, 130, 200, 245 Type of material austenitic steels Applied product standards Certificate No CE- HOU-ACCREDIA Issued by Notified Body No Applications/limitations - See Type Examination Certificate for pressure and temperature limitations; - this Certificate only relates to directives described above. Other directives, covering other phenomena, and also having requirements related to CE marking, might also apply; - equipment is intended for industrial applications. Sites covered by this certificate Product name Production site name Address Prover Phoenix 5225 S 37th St Ste Phoenix AZ - USA Performed audits Assessment has been carried out on the production site by DNV GL Business Assurance USA, Inc., as described in assessment report dated Page 2 of 3
3 Certificate No CE-USA-ACCREDIA Terms and conditions The certificate is subject to the following terms and conditions: - in case of damages caused by defective products, Council Directive 85/374/EEC, as amended, will apply; - the certificate is only valid for the products and/or manufacturing premises listed above; - the manufacturer shall fulfil the obligations arising out of the quality system as approved and uphold it so that it remains adequate and efficient; - the manufacturer shall inform DNV GL Business Assurance USA, Inc. of any intended updating of the quality system and DNV GL Business Assurance Italia S.r.l. will assess the changes and decide if the certificate remains valid; - the manufacturer shall inform DNV GL Business Assurance USA, Inc. of any addition/modification of products and/or design for products and DNV GL Business Assurance Italia S.r.l. will decide if a reassessment of the quality system is required; - periodical audits will be held, in order to verify that the manufacturer maintains and applies the quality system DNV GL Business Assurance USA, Inc. reserves the right, on a spot basis or based on suspicion, to pay unannounced visits; The following may render this certificate invalid: - changes in the quality system affecting production. - periodical audits not held within the allowed time window. Conformity declaration and marking of product When meeting with the terms and conditions above, and based on an EC Design Examination Certificate or EC Type Examination Certificate valid for the same product(s), the Manufacturer may draw up an EC declaration of conformity and legally affix the CE mark followed by the Notified Body identification number (0496) of DNV GL Business Assurance Italia S.r.l. END OF CERTIFICATE Page 3 of 3
4 DNV BUSINESS ASSURANCE EC TYPE - EXAMINATION CERTIFICATE Certificate No CE-HOU-ACCREDIA This certificate consists of 4 pages. This is to certify that the product(s) Pressure Accessory with name and/or type designation(s) Prover Models 001, 003, 007, 015, 025, C25, 035, A35, 045, 060, 090, 130, 200, 245 manufactured by Flow Management Devices, LLC 5225 S 37th St Ste Phoenix AZ - USA has been assessed with respect to the conformity assessment procedure described in annex III (module B) of Directive 97/23/EC on pressure equipment, as amended, and found to comply. Further details are given in the following pages. This certificate is valid until Place and date Vimercate (MB), for the Notified Body 0496 DNV GL Business Assurance Italia S.r.l. Giovanni Cortesi Nicola Privato Technical Reviewer Management Representative Page 1 of 4
5 Certificate No CE-HOU-ACCREDIA Jurisdiction Application of Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council and Decreto Legislativo No. 93 of 25 February Certificate history Revision Description Issue date 00 Original certificate Products covered by this certificate Product name Product description Product version Category Class 150 Class 300 Class 150 Class ,900, 1500 FMD-001 thru FMD 007 FMD-001 FMD-015 thru FMD 245 FMD-003 thru FMD 245 FMD-001 thru FMD 245 III III IV IV IV Applied product standards Design data Models Maximum allowable pressure (PS) ANSI Class MAWP Minimum/maximum allowable temperature (TS) Fluid group All 1 (150#) 19.0 barg (275 psig) C / C 1 All 2 (300#) 49.6 barg (720 psig) C / C 1 All 3 (600#) 99 barg (1440 psig) C / C 1 All 4 (900#) 148 barg (2160 psig) FMD-003 thru FMD (1500#) 248 barg (3600 psig) C / C C / C 1 Page 2 of 4
6 Certificate No CE-HOU-ACCREDIA Applications/limitations Model Pressure Class and Volume FMD Model C A volume (L) volume (gal) Pressure Class Allowable Pressure at Elevated Temperature Temperature ( C) ANSI Flange Class 150# 300# 600# 900# 1500# Min Max psig bar psig bar psig bar psig bar psig bar ` Tests carried out on prototype(s) Product name DNV GL Prototype Test Model: H44C25(LR)1A3S1CBWWES Production site name Flow Management Devices, LLC Tests 99.3 bar g (2160 psig) / 4 hr - hold Address 5225 S. 37th Street, Ste. 4, Phoenix, AZ USA Inspection of manufacturing and testing of prototype(s) has been carried out by DNV GL Business Assurance USA, Inc., ref. design assessment report dated Page 3 of 4
7 Certificate No CE-HOU-ACCREDIA Documents reviewed Drawing/Document No. Revision Date Title Status *) DOC C Flow Prover Pressure Vessel Design Calculations A DOC H Hydrostatic Pressure Test Procedure A DOC - - Hydro Test Cert (Sample) FI COM A Nameplate Dwg A DOC C - PROVER_MANUAL A DOC A PED Technical File A DOC *) A = Approved, AC = Approved with comments, FI = For information DNV GL Prototype Test Model: H44C25(LR)1A3S1CBWWES A Terms and conditions The certificate is subject to the following terms and conditions: - in case of damages caused by defective products, Council Directive 85/374/EEC, as amended, will apply; - the certificate is only valid for the product(s) listed above. The following may render this certificate invalid: - changes in the design or construction of the product(s); - changes or amendments to the referenced directive(s); - changes or amendments in the standard(s) which form the basis for documenting compliance with the essential requirements of the directive(s). Conformity declaration and marking of product This certificate does not give the manufacturer the right to CE mark and put on the market the product(s) listed on this certificate. Only after the product(s) have been found to comply with the requirements in a following Conformity Assessment Module C1, D, E or F, the manufacturer may draw up an EC declaration of conformity and legally affix the CE mark followed by the identification number of the Notified Body involved in these modules. END OF CERTIFICATE Page 4 of 4
PRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015
DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: 12403-2018-CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, 2018-13 May, 2021 This is to certify
More informationEC Certificate Full Quality Assurance System
241154-2017-CE-ITA-NA-PS Rev. 0.0 PRJC-403782-2012-MSL-ITA 14 December 2019 This is to certify that the quality system of: ANGELANTONI LIFE SCIENCE SRL For design, production and final product inspection/testing
More informationUSING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
More informationCERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS
Accredited product certification CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS Revisions in this document: Rev. no. Date Description of revision 3 2015-08-25 4.8 Added information regarding certificate
More informationConformity assessment
Training Course on Conformity and Interoperability, Tunis-Tunisia, from 22 to 26 May 2017 Conformity assessment Presented by: Karim Loukil & Kaïs Siala Page 1 Today s Objectives Present basic information
More informationEC CERTIFICATE PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE. No issued to. Ansell Protective Solutions Lithuania, UAB
PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE No. 46 02 01 issued to Ansell Protective Solutions Lithuania, UAB Pramonesg. 5 K, Tauragé, LT-72328, Lithuania We hereby certify that an examination
More informationList of forms CLAP/WGP by subject /68/UE
List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations
More informationRECOMMENDATION FOR USE
Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all
More informationTURKISH STANDARDS INSTITUTION
TURKISH STANDARDS INSTITUTION NEW GLOBAL OLD APPROACH REGULATIONS CONFORMITY ASSESSMENT PROCEDURES AND PRINCIPLES Board Decision : 29.04.2014 Date 50.-236 Validity date : 05.05.2014 CHAPTER ONE Objective,
More informationLL-C (Certification) Services Overview
LL-C (Certification) Services Overview Who is LL-C (Certification)? LL-C (Certification) is an international certification body operating in more than 40 countries with experience in the field. Provides
More informationDIGITALSIGN - CERTIFICADORA DIGITAL, SA.
DIGITALSIGN - CERTIFICADORA DIGITAL, SA. TIMESTAMP POLICY VERSION 1.1 21/12/2017 Page 1 / 18 VERSION HISTORY Date Edition n.º Content 10/04/2013 1.0 Initial drafting 21/12/2017 1.1 Revision AUTHORIZATIONS
More informationCERTIFICATE AND MARK USAGE PROCEDURE
1 / 7 CERTIFICATE AND MARK USAGE PROCEDURE 1. Revision History Rev. No Date of Rev. Definition of Rev. Reason of Rev. 17 20.3.2018 General revision is made. Change of SZUTEST's logo. 16 7.8.2017 Updated
More informationWelding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationGDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10
GDPR AMC SAAS AND HOSTED MODULES UK version AMC Consult A/S June 26, 2018 Version 1.10 INDEX 1 Signatures...3 2 General...4 3 Definitions...5 4 Scoping...6 4.1 In scope...6 5 Responsibilities of the data
More informationProt. DC2018SSV120 Milano, To all Certification Bodies (CBs) with OH&S accreditation. To the associations of Conformity Assessment Bodies
Prot. DC2018SSV120 Milano, 22-03-2018 To all Certification Bodies (CBs) with OH&S accreditation To the associations of Conformity Assessment Bodies Subject: Department of Certification and Inspection informative
More informationAbu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer
Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI
More informationCertification. Causes of Reduction of Scope of Certification
Certification Granting Maintaining Suspension Reduction of Scope Withdrawal Changes & Modification of Certification Causes of Reduction of Scope of Certification Issue of changed certificate Assessment
More informationMarks associated with TUV SUD BABT Certification Schemes
TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation
More informationGUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000AS Revision No: 3 This is to certify: That the Peripheral Equipment with type designation(s) UniOP(TM) etop Series 500 and 600 Issued to Exor International
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationTechnical Report No for the conformity assessment according to the EMC Directive 2004/108/EC
Technical Report for the conformity assessment according to the EMC Directive 2004/108/EC, Article 7 and Annex III or respectively the EMC Law in the currently valid version Client: ABB Automation Products
More informationTechnical Information
Date of last update: 10-08 Ref: Application Engineering Europe PRESSURE EQUIPMENT DIRECTIVE APPLIED TO COPELAND BRAND PRODUCTS The Pressure Equipment Directive (PED) affects compressors, condensing units
More informationSouth African Forestry Assurance Scheme SAFAS 6:2018. Certification and Accreditation Procedures. Issue SAFAS Council SAFAS
South African Forestry Assurance Scheme SAFAS 6:2018 Issue 1 2018-05-22 SAFAS 346 Burger Street Pietermaritzburg South Africa Tel: +27 33 897 5000 1 Document name: Document number: SAFAS 6:2018 Approved
More informationMarks Associated with TUV SUD BABT Certification Schemes
Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of
More informationPRODUCT CERTIFICATION AND CONFORMITY ASSESSMENT SCHEME GENERAL PRINCIPLES
Page: 1/18 Developed by: Jakub Dering Approved by: Przemysław Gałka 1. GENERAL INFORMATION Product Certification Bureau (CW) is an independent organizational unit in the structure of the Polish Register
More informationRegulations for Compulsory Product Certification
Regulations for Compulsory Product Certification Chapter I General Provisions Article 1 Based on relevant laws and regulations covering product safety licensing and product quality certification so as
More informationdeclaration that the same application has not been submitted to any other registered body;
Short introduction Product certification can be requested by the manufacturer or the authorized agent of the manufacturer (importer) i.e. the applicant. Certification is carried out on the basis of a Module
More informationCERTIFICATE of EU TYPE-APPROVAL
CERTIFICATE of EU TYPE-APPROVAL No. DK 0199.183 Revision 1 Boston / Vegas / California / Kansas NON-AUTOMATIC WEIGHING INSTRUMENT Issued by DELTA Danish Electronics, Light & Acoustics EU - Notified Body
More informationDescription of the TÜV NORD CERT certification procedure GMP+ FC (Feed Certification scheme) of GMP+ International B.V. (NL)
Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 3 1.1 Audit Preparation... 3 1.2 Establishment of readiness for certification... 3 1.3 Temporary approval... 3 1.4 Audit Stage 2 Certification
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016N This is to certify: That the Peripheral Equipment with type designation(s) JUMO mtron T Issued to JUMO GmbH & Co. KG Fulda Hessen, Germany is found
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
HRVATSKI REGISTAR BRODOVA Croatian Register of Shipping EC TYPE EXAMINATION (MODULE B) CERTIFICATE THIS IS TO CERTIFY: That Croatian Register of Shipping did undertake the relevant type approval procedures
More informationNCS 8776 Certification scheme to NTA 8776
NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. 144804-2013-EUREPGAP-ITA-ACCREDIA Registration No.: CERT10422013GGITA Date of Certification Decision 2017-01-18 GGN Number.: 4052852609500 Valid 2016-12-12 2017-12-11
More informationUncertified Translation Physikalisch-Technische Bundesanstalt Braunschweig und Berlin (1) EC Type Examination Certificate (2) Equipment and Protective Systems Intended for Use in Potentially Explosive
More information(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and protective systems intended for use in potentially explosive atmospheres Directive 94/9/EC (3) EC-type-examination Certificate number
More informationIAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001)
IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) (IAF MD 13:2015) Issue 1 IAF MD - Knowledge Requirements for Accreditation
More informationPEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue
PEFC-Norge PEFC/03-1-01 Fremmer bærekraftig skogbruk - For mer info: www.pefc.org Our ref.: IKO - Oslo, 2009-10-15 PEFC09239 PEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue 1 2009-10-15 PEFC
More informationMesekon Oy Turku ISO 9001:2008, ISO :2005
Certificate No. 2541-10 has granted this certificate as proof that the quality system of Turku complies with the requirements of the standard ISO 9001:2008, ISO 3834-2:2005 Certification covers Contract
More informationScheme for accreditation, approval and authorization to Access Security-related Repair and Maintenance Information (RMI) SERMI operations group
Scheme for accreditation, approval and authorization to Access Security-related Repair and Maintenance Information (RMI) SERMI operations group May 2016 Table of contents 1 Scope... 4 2 Normative references...
More informationUL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU
00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationSolutions that ensure safety, reliability and compliance.
RED Transition and Implementation by TÜV SÜD Radu Gosav, Senior Manager EMC&RF, Greater China Solutions that ensure safety, reliability and compliance. TÜV SÜD Greater China Slide 1 17-02-22 1 RED Introduction
More informationAmerican Society of Sanitary Engineering Seal (Certification) Program
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Water Hammer Arresters Tested under ASSE Standard 1010 Revised: February, 2004 Laboratory File Number
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationOperating Instructions
TPS S1 AC in DC out Translation of the original instructions TPS 110-400 Mains pack Operating Instructions PT 0199 BEN/C (1010) EN Table of contents Table of contents 1 About this manual...............................................
More informationUDI in the MDR. Economic Operators The new regulations create Economic Operators who play a role in the UDI system.
UDI in the MDR The European Union intends to replace the existing directives related to medical device, Active Implantable Medical Devices, In Vitro Diagnostic Devices, and Medical Devices, with two regulations.
More informationDATA PROCESSING TERMS
DATA PROCESSING TERMS Safetica Technologies s.r.o. These Data Processing Terms (hereinafter the Terms ) govern the rights and obligations between the Software User (hereinafter the User ) and Safetica
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. CERT-0230-200-EUREPGAP-ROM-SINCERT Registration No.: CERT0230200MSINCERT Date of Certification Decision 201-10-20 GGN Number.: 40499291902 Valid 201-11-04 201-11-03
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationEC Type-Approval Certificate
EC Type-Approval Certificate No. DK 0199.492 FT-10 / FT-10 Fill / FT-10 Flow NON-AUTOMATIC WEIGHING INSTRUMENT Issued by DELTA Danish Electronics, Light & Acoustics EU - Notified Body No. 0199 In accordance
More informationSLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008
SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 REQUIREMENTS FOR CERTIFICATION BODIES CONDUCTING FOREST CERTIFICATION AND CHAIN - OF - CUSTODY OF WOOD VERIFICATION SFCS 1005:2004 Effective as of September
More informationRECOMMENDATION FOR USE
Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,
More informationIntroduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019
Training Course NAA Inspectors Training Course - Initial Airworthiness Location(s) / Date(s) Hoofddorp, 11-13 February 2019 Netherlands 17-19 September 2019 List price 1290.00 Introduction EU Regulation
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. 123140-2012-EUREPGAP-ITA-ACCREDIA Registration No.: CERT09582012GGVENACCREDIA Date of Certification Decision 2016-09-19 GGN Number.: 4052852273954 Valid 2016-09-24
More informationGdańsk, DECEMBER 2017
Principles of using management systems certification marks December 2017 were approved by the Manager of the Management Systems Certification Bureau of Polish Register of Shipping on 1 December 2017. On
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationCertificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018
Certificate Certificate number: 2018-016 Certified by EY CertifyPoint since: July 10, 2018 Based on certification examination in conformity with defined requirements in ISO/IEC 17065:2012 and ETSI EN 319
More informationAbu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY
More informationAPPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme
APPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme To apply for QCI Approval under Yoga School Certification Scheme, please complete this application form and send it to QCI at
More informationCRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS
CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS Approved By: Executive: Accreditation: Mpho Phaloane Revised By: RBI STC Working Group Members Date
More informationData Processing Clauses
Data Processing Clauses The examples of processing clauses below are proposed pending the adoption of standard contractual clauses within the meaning of Article 28.8 of general data protection regulation.
More informationPRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES
Ref No: RACS/SOP/57 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Mechanical Customized
More informationCommittee on the Internal Market and Consumer Protection
European Parliament 2014-2019 AMDMTS: 12 Regulation on ISA, the "EU Cybersecurity Agency", and repealing Regulation (EU) s created with Go to http://www.at4am.ep.parl.union.eu \000000.doc United in diversity
More informationAn unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.
An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. Consolidated version of The Swedish Board for Accreditation
More informationPRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM
Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System
More informationNotification of Certification Bodies for assessing sustainable forest management in Romania
Romanian Forest Certification Scheme 2017 Annex 13 PEFC-RO DST 8013:2017 Notification of Certification Bodies for assessing sustainable forest management in Romania March 2017 Copyright notice PEFC Romania
More informationContent of mandatory certificates
Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum
More informationAbu Dhabi Certification Scheme for Beauty Salon Sector
Abu Dhabi Certification Scheme for Beauty Salon Sector Hairstylist Assessment and Surveillance Plan for Beauty Salon Sector Hairstylist Issue: 1.0 Date: 27/11/2016 Total Number of Pages: 12 Table of Contents
More informationSIRIM QAS International Sdn. Bhd.
SIRIM QAS International Sdn. Bhd. epcs/doc/01-1.1 ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified
More informationMed-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH
Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained
More informationRoyal Mail Consultation: Changes to Postal Schemes to reflect new data protection legislation
Royal Mail Consultation: Changes to Postal Schemes to reflect new data protection legislation Published: 27 February 2018 Responses required by: 26 March 2018 Summary 1. Postal Schemes set out the terms
More informationDOCUMENTATION AND QUALITY ASSURANCE
SPECIFICATION PREFACE SHEET DEPARTMENT: Engineering / Instrumentation SHEET 1 OF 12 AREA: Grundartangi Reduction Plant SPEC No: 00/07/TS012 REV: C2 STANDARD TECHNICAL SPECIFICATION FOR DOCUMENTATION AND
More informationSIRIM QAS International Sdn. Bhd.
SIRIM QAS International Sdn. Bhd. ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified to the requirements
More informationMODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL
CAC/GL 48-2004 Page 1 of 6 INTRODUCTION MODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL 48-2004 Certification is one method that can be utilized by regulatory agencies of importing and exporting
More informationContinuing Professional Education (CPE) CPE Rules for Pesticide Advisors
Irish Agricultural Supply Industry Standards CPE Rules for Pesticide Advisors IASIS Limited 2015 IASIS Ltd., 31A Ravens Rock Road, Sandyford Industrial Estate, Dublin 18 +353 (0)1 293 0021 +353 (0)1 293
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More information1510 MOTOR CONTROLLERS
SECTION 262913- MOTOR CONTROLLERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of contract, including general and supplementary conditions and Division 1 specification section,
More informationInformation for your Certification
Information for your Certification General: The access to the certification body is open to all companies and persons. The certification body is liable to impartiality, avoiding any conflicts of interests
More informationARTICLE 29 DATA PROTECTION WORKING PARTY
ARTICLE 29 DATA PROTECTION WORKING PARTY 18/EN WP261 Article 29 Working Party Draft Guidelines on the accreditation of certification bodies under Regulation (EU) 2016/679 Adopted on 6 february 2018 1 THE
More informationBattery Program Management Document
Battery Program Management Document Revision 5.1 February 2011 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone: 1.202.785.0081
More informationUnited Kingdom of Great Britain and Northern Ireland
(UK/0126/0028) MI-006 United Kingdom of Great Britain and Northern Ireland Certificate of EC type-examination of a measuring instrument Number: UK/0126/0028 revision 1 issued by the Secretary of State
More information2.4 The inspection and certification orders are processed in the order in which the documents and/or information are received.
1 Scope and Definition The Inspection and Certification Ordinance applies to the performance of inspections and the issuing of certificates for products, continuous surveillance and approval of manufacturer
More informationIVDR Breakout. Copyright 2017 BSI. All rights reserved.
IVDR Breakout 1 IVDR Classification and conformity assessment 2 Classification- IVDR 3 Classification of IVDs Re-classification of IVDs will mean 80-90 % will no longer be able to self certify conformity
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies certifying products, processes and services
INTERNATIONAL STANDARD ISO/IEC 17065 First edition 2012-09-15 Conformity assessment Requirements for bodies certifying products, processes and services Évaluation de la conformité Exigences pour les organismes
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000KD Revision No: 1 This is to certify: That the Electrical Measuring and Protection Relay with type designation(s) PPU-3, GPU-3 - Generator Controllers
More informationChecklist According to ISO IEC 17065:2012 for bodies certifying products, process and services
Name of Certifying Body Address of Certifying Body Case number Date of assessment With several locations Yes No Assessed locations: (Name)/Address: (Name)/Address: (Name)/Address: Assessed area (technical
More informationSpillemyndigheden s requirements for accredited testing organisations. Version of 1 July 2012
Version 1.3.0 of 1 July 2012 Contents 1 Introduction... 3 1.1 Authority... 3 1.2 Objective... 3 1.3 Target audience... 3 1.4 Version... 3 1.5 Enquiries... 3 2 Certification... 4 2.1 Framework for certification...
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
More informationPEFC Certification System Netherlands - Certification Procedures
PCSN SCHEME DOCUMENT PCSN IV Issue 2 10-03-2017 PEFC Certification System Netherlands - Certification Procedures PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax:
More informationMarks associated with TÜV SÜD BABT Certification Schemes
Marks associated with TÜV SÜD BABT Certification TÜV SÜD BABT is a certification body of TÜV SÜD BABT 2012 Date:23 April 2012 Page 1 of 15 Contents 1. Introduction... 4 2. Definitions... 4 3. Overview
More informationEXBO e-signing Automated for scanned invoices
EXBO e-signing Automated for scanned invoices Signature Policy Document OID: 0.3.2062.7.2.1.12.1.0 Approval Status: Approved Version: 1.0 Page #: 1 of 13 1. Introduction 1.1. Scope This document covers
More informationCybersecurity. Quality. security LED-Modul. basis. Comments by the electrical industry on the EU Cybersecurity Act. manufacturer s declaration
Statement Comments by the electrical industry on the EU Cybersecurity Act manufacturer s declaration industrial security Cybersecurity Quality basis security LED-Modul Statement P January 2018 German Electrical
More informationIAF Mandatory Document for the Transfer of Accredited Certification of Management Systems
IAF MD 2:2007. International Accreditation Forum, Inc. IAF Mandatory Document IAF Mandatory Document for the Transfer of Accredited Certification of Management Systems (IAF MD 2:2007) IAF MD2:2007 International
More informationCOMMITTEE FOR PROPRIETARY MEDICINAL PRODUCTS (CPMP) GUIDELINE ON REQUIREMENTS FOR PLASMA MASTER FILE (PMF) CERTIFICATION
The European Agency for the Evaluation of Medicinal Products Evaluation of Medicines for Human Use London, 26 February 2004 COMMITTEE FOR PROPRIETARY MEDICINAL PRODUCTS (CPMP) GUIDELINE ON REQUIREMENTS
More informationISO/IEC 17065:2012 VERTICAL/FILE REVIEW ASSESSMENT
F 136-04 ISO/IEC 17065:2012 SANAS Accr. No/s. VERTICAL/FILE REVIEW ASSESSMENT Organisation Organisation Representative Date: Area / field of operation Accreditation standard Assessor Signed Lead Assessor:
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB00000A6 Revision No: 6 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationMed-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH
Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained
More informationSGS INTRON CERTIFICATIE CERTIFICATION AND ATTESTATION REGULATIONS 2015 TABLE OF CONTENT
TABLE OF CONTENT 1. INTRODUCTION...2 2. PROCEDURES...3 2.1 SUMMARY... 3 2.2 ADMISSION PROCEDURES... 4 2.2.1 Information... 4 2.2.2 Quotations... 4 2.2.3 Conclusion of an agreement... 4 2.2.4 Admission
More informationDigital Multimeter Safety Tips
Digital Multimeter Safety Tips Most engineers perform measurements with a digital multimeter (DMM) as part of their job. Before you grab the nearest handheld DMM next time, make sure you select the right
More information