NetComposer system specification text, status

Transcription

1 NetComposer system specification text, status Digital network-compatible Light Management System NetComposer NCR3 LAN 2 Port Version Control of 128 DALI devices or 1024 DMX/RDM channels or 64 DALI devices plus 512 DMX/RDM channels. For installation in control cabinet. Communication via Standard Ethernet 10/100Mbit network. Every DALI system connection (DALI port) controls up to 64 DALI components like DALI lighting fixtures, DALI - sensors or DALI digital input modules. The maximum line length is 150 meter. Line length above 150 meter must be split to several DALI ports. Every DMX system connection (DMX port) is full RDM-Standard compliant and controls up to 512 DMX/RDM channels (DMX fixtures, MediaDot or Moving Heads). It s possible to use DALI and DMX/RDM devices together in groups and scenes to control them jointly. Optional every NetComposer LAN can handle the following operation modes or system couplings: - LightingTab APP operation (WLAN Access Point and an ios, Android 4.x or WIN8 mobile device like Tablet, Smartphone or Ultrabook necessary) - VisioTab Visualisation, Graphic building visualisation for touch PC s - KNX system coupling to building automation (NetComposer Connect required) NetComposer system functions: - Manuel and automatic DALI / DMX addressing, multiple DALI addressing mode xdali - Time switching program with weekly and annual calendar with up to 24 events per day - Astro time function for all time switching functions - Party / Event function to activate / deactivate time switching program - Internal media player for 1 DMX universe with 12 parameterized effects and 100 memory sets - Operation mode for colour- or moving head fixtures (DALI and DMX) - Safe shutdown in case of power failure with permanent measuring of the voltage - Energy saving mode (mains switching over optional relays module) global or local groups mixable with any DALI or DMX device global or local scenes mixable with any DALI or DMX device - 32 sequences (CUE s) with up to 128 steps, thereof 1 active logic combinations for individual system setups - Routing possibility DMX port to DALI port - UDP DMX router mode for media playing over optional media server - LightingTab APP integration with 90 memory sets for mobile operation over WLAN - Lighting management with up to 254 NetComposer devices in one network possible - Easy to use graphic or spreadsheet software surface - Composer software for WIN 7/8 included, for download go to System connections: - DALI ports: 2 - DMX ports: 2 - Simultaneous usable ports: 2 Operating Voltage: 24VDC / 650mA NCR3 LAN2 /

2 Digital network-compatible Light Management System NetComposer NCR3 LAN 1 Port Version Control of 64 DALI devices or 512 DMX/RDM channels. For installation in control cabinet. Communication via Standard Ethernet 10/100Mbit network. Every DALI system connection (DALI port) controls up to 64 DALI components like DALI lighting fixtures, DALI - sensors or DALI digital input modules. The maximum line length is 150 meter. Line length above 150 meter must be split to several DALI ports. Every DMX system connection (DMX port) is full RDM-Standard compliant and controls up to 512 DMX/RDM channels (DMX fixtures, MediaDot or Moving Heads). Optional every NetComposer LAN can handle the following operation modes or system couplings: - LightingTab APP operation (WLAN Access Point and an ios, Android 4.x or WIN8 mobile device like Tablet, Smartphone or Ultrabook necessary) - VisioTab Visualisation, Graphic building visualisation for touch PC s - KNX system coupling to building automation (NetComposer Connect required) NetComposer system functions: - Manuel and automatic DALI / DMX addressing, multiple DALI addressing mode xdali - Time switching program with weekly and annual calendar with up to 24 events per day - Astro time function for all time switching functions - Party / Event function to activate / deactivate time switching program - Internal media player for 1 DMX universe with 12 parameterized effects and 100 memory sets - Operation mode for colour- or moving head fixtures (DALI and DMX) - Safe shutdown in case of power failure with permanent measuring of the voltage - Energy saving mode (mains switching over optional relays module) global or local groups with any DALI or DMX device global or local scenes with any DALI or DMX device - 32 sequences (CUE s) with up to 128 steps, thereof 1 active logic combinations for individual system setups - Routing possibility DMX port to DALI port (only 2 port version) - UDP DMX router mode for media playing over optional media server - LightingTab APP integration with 90 memory sets for mobile operation over WLAN - Lighting management with up to 254 NetComposer devices in one network possible - Easy to use graphic or spreadsheet software surface - Composer software for WIN 7/8 included, for download go to - For system extensions it s possible to unlock the 2 nd port (for additional charge) System connections: - DALI ports: 2 - DMX ports: 2 - Simultaneous usable ports: 1 Operating Voltage: 24VDC / 650mA NCR3 LAN1 /

3 Digital lighting control device NetComposer NCR3 USB 1 Port Version Control of 64 DALI devices or 512 DMX/RDM channels. For installation in control cabinet. Communication via Standard Ethernet 10/100Mbit network. Every DALI system connection (DALI port) controls up to 64 DALI components like DALI lighting fixtures, DALI - sensors or DALI digital input modules. The maximum line length is 150 meter. Line length above 150 meter must be split to several DALI ports. Every DMX system connection (DMX port) is full RDM-Standard compliant and controls up to 512 DMX/RDM channels (DMX fixtures, MediaDot or Moving Heads). NetComposer system functions: - Manuel and automatic DALI / DMX addressing, multiple DALI addressing mode xdali - Time switching program with weekly and annual calendar with up to 24 events per day - Astro time function for all time switching functions - Party / Event function to activate / deactivate time switching program - Internal media player for 1 DMX universe with 12 parameterized effects and 100 memory sets - Operation mode for colour- or moving head fixtures (DALI and DMX) - Safe shutdown in case of power failure with permanent measuring of the voltage - Energy saving mode (mains switching over optional relays module) global or local groups with any DALI or DMX device global or local scenes with any DALI or DMX device - 32 sequences (CUE s) with up to 128 steps, thereof 1 active logic combinations for individual system setups - Routing possibility DMX port to DALI port (only 2 port version) - Easy to use graphic or spreadsheet software surface - Composer software for WIN 7/8 included, for download go to - For system extensions it s possible to unlock the 2 nd port (for additional charge) System connections: - DALI ports: 2 - DMX ports: 2 - Simultaneous usable ports: 1 Operating Voltage: 24VDC / 650mA NCR3 USB1 /

4 Digital lighting control device NetComposer NCR3 USB 2 Port Version Control of 128 DALI devices or 1024 DMX/RDM channels or 64 DALI devices plus 512 DMX/RDM channels. For installation in control cabinet. Communication via Standard Ethernet 10/100Mbit network. Every DALI system connection (DALI port) controls up to 64 DALI components like DALI lighting fixtures, DALI - sensors or DALI digital input modules. The maximum line length is 150 meter. Line length above 150 meter must be split to several DALI ports. Every DMX system connection (DMX port) is full RDM-Standard compliant and controls up to 512 DMX/RDM channels (DMX fixtures, MediaDot or Moving Heads). It s possible to use DALI and DMX/RDM devices together in groups and scenes to control them jointly. NetComposer system functions: - Manuel and automatic DALI / DMX addressing, multiple DALI addressing mode xdali - Time switching program with weekly and annual calendar with up to 24 events per day - Astro time function for all time switching functions - Party / Event function to activate / deactivate time switching program - Internal media player for 1 DMX universe with 12 parameterized effects and 100 memory sets - Operation mode for colour- or moving head fixtures (DALI and DMX) - Safe shutdown in case of power failure with permanent measuring of the voltage - Energy saving mode (mains switching over optional relays module) global or local groups mixable with any DALI or DMX device global or local scenes mixable with any DALI or DMX device - 32 sequences (CUE s) with up to 128 steps, thereof 1 active logic combinations for individual system setups - Routing possibility DMX port to DALI port (only 2 port version) - Easy to use graphic or spreadsheet software surface - Composer software for WIN 7/8 included, for download go to System connections: - DALI ports: 2 - DMX ports: 2 - Simultaneous usable ports: 2 Operating Voltage: 24VDC / 650mA NCR3 USB2 / Display module for NCR3 (for integration in all LAN+USB versions) Graphic display module for the NetComposer 3 with integrated 4 way button. To visualise the current operating mode: active time program, active sequences, active xplayer Over a software menu it s possible to call scenes direct at the NetComposer device. Mounting: for integration in NetComposer 3 it will replace the standard front panel NCR-DIS /

5 GlassTouch TLX-6 Sixfold capacitive sensor keypad for wall mounted switching boxes for the NetComposer System driving DALI- / DMX-devices GlassTouch TLX-6 is a modern control unit for the NetComposer-System. It is suitable for designoriented users with highest standards for function and comfort. TLX-6 has six touch buttons which are placed behind a 5mm glass plate. Each button is assignable to the NetComposer with several commands and switching options operated by single press, toggle or short/long press. The control unit has a backlight (TouchGlow) in neutral white which can be turn on/off and dimmed. The GlassTouch surface can be designed on customers demand. The symbols, text and background images can be easily printed on a foil or paper and placed behind the glass plate through a slot and sealed. The TLX-6 is designed for indoor use. Installation on wall mounted switching boxes. Up to 1-10 GlassTouch devices are connectable to one DALI-line. The number of GlassTouch devices on DALI-line depends on power supply of the attached devices and the use of the TouchGlow. INTELLIGENT LIGHTING / EUTRAC Selectable models in white or black: Type BK: TLX-6 White / Type WH: TLX-6 Black /

6 GlassTouch TLX-12 Twelvefold capacitive sensor keypad for wall mounted switching boxes for the NetComposer System driving DALI- / DMX-devices GlassTouch TLX-12 is a modern control unit for the NetComposer-System. It is suitable for designoriented users with highest standards for function and comfort. TLX-12 has twelve touch buttons which are placed behind a 5mm glass plate. Each button is assignable to the NetComposer with several commands and switching options operated by single press, toggle or short/long press. The control unit has a backlight (TouchGlow) in neutral white which can be turn on/off and dimmed. The GlassTouch surface can be designed on customers demand. The symbols, text and background images can be easily printed on a foil or paper and placed behind the glass plate through a slot and sealed. The TLX-12 is designed for indoor use. Installation on wall mounted switching boxes. Up to 1-10 GlassTouch devices are connectable to one DALI-line. The number of GlassTouch devices on DALI-line depends on power supply of the attached devices and the use of the TouchGlow. INTELLIGENT LIGHTING / EUTRAC Selectable models in white or black: Type BK: TLX-12 White / Type WH: TLX-12 Black /

7 TrackLinkButton TLB4 DALI digital input module for connecting four potential free contacts, suitable for installation in a standard box embedded in the wall. For connection to the NetComposer system. The power supply happens via the DALI data bus. Current drain per digital input module: 10 ma TLB4 / TrackLink-REG TLR8 DALI digital input module for connecting eight potential free contacts, suitable for installation on a DIN rail. For connection to the NetComposer system. The power supply happens via the DALI data bus. Current drain per digital input module: 10 ma Space required: 3TE TLR8 / Power supply PSU1 Controlled constant current supply for connection of one NetComposer 230V AC / 24V DC, 0,63A PSU1 / Power supply PSU3 Controlled constant current supply for connection of up to three NetComposer 230V AC / 24V DC, 2,5A PSU3 / Network switch NWS 5-Port 10/100Mbps Fast Ethernet Switch, for connection of up to four NetComposer and one PC via CAT5 network lines with RJ45 plug, completely with power supply. NWS /

8 WLAN Access Point NCR-AP WLAN Access Point for NetComposer LAN controlled by the LightingTab APP over WLAN, complete with power supply and cat5 network cable for connection to the NetComposer LAN (RJ45). NCR-AP / LightSwitch LSR4 Digital switching actuator suitable for installation on a DIN rail. 230V four times switching output each resiliant with up to 8 A steady current. Suitable for connection to DALI or DMX / RDM with integrated double interface. Power supply via 24 VDC connection. Incl. Status display via integrated LED. LSR4 / LightMotionSensor LMS Digital DALI light sensor white/black/silver coated for presence and daylight (adjustment via turning the head to the prevalent daylight incidence) for 3 phase track with data bus, insertable to a random spot on the track. With 2 gold plated contact springs for tapping the DALI data bus signals and the power supply from the data bus track. Suitable for connection to the data bus system for the indoor relative daylight control and the presence dependant light control. Material: polycarbonate, self-extinguishing according to class V0. Visible dimensions: 55 x 43 mm Current drain per sensor: 20 ma INTELLIGENT LIGHTING / EUTRAC LMS / white LMS / black LMS / silver LightMotionSensor LMS WL Digital DALI light sensor in a white plastic housing for the daylight control. Suitable for connection to the NetComposer system for the indoor relative daylight control. With 2 screw-type terminals for connecting the DALI data bus. The power supply happens via the DALI data bus. Material: ABS plastic white, dimensions: 71 x 71 x 27mm Current drain per sensor: 20 ma INTELLIGENT LIGHTING / EUTRAC LMS-WL / white

9 LightMotionSensor LMS WPL Digital DALI light sensor in a white plastic housing for presence and daylight control. Suitable for connection to the data bus system for the indoor relative daylight control and the presence dependant light control. With 2 screw-type terminals for connecting the DALI data bus. The power supply happens via the DALI data bus. Material: ABS plastic white, dimensions: 71 x 71 x 33mm Current drain per sensor: 20 ma INTELLIGENT LIGHTING / EUTRAC LMS-WPL / white LightSpectrumSensor LSS Digital light sensor to measure luminance intensity, with an additional colour sensor to measure visible light, and with a UVA sensor element. The housing consists of two parts with the sensor head and an interface box for the connection to a standard Ethernet 10/100Mbit. The LightSpectrumSensor together with the NetComposer and the EUTRAC visualisation software can manage the lighting control for very light sensitive areas like exhibitions in museums. Via the visualisation software the measurement values can be stored in a database and be used to determine the light situation at the exhibits during the exhibition period. Technical data: Sensor head: max. distance to the interface box 1 m (optional prolongable up to 7 m) Sensor 1: Sensor 1. Sensor 2: Sensor 3: LUX luminance intensity RGB light colour UV intensity Temperature and humidity Measurement interval: 3 s Interface box: Standard Ethernet 10/100 Mbit with power supply via Ethernet Operating voltage: PoE (Power over Ethernet) EMV: EN / EN The database analysis happens project dependant in coordination with the owner/planner. Important notice: Each sensor can be calibrated only to one type of illuminant, the colour recognition is not suitable for mixed operation of different luminaires and/or daylight. Sensor and sensor head: black coated LSS /

10 LightSwitch LS1-230 High voltage relay switch with DALI status LED as pcb for switching electronic devices up to 150 W and AGL or high voltage halogen lamps up to 500 W. For the integration in the basic body of the MultiCompactAdaptor or an OEM body. 230 / 240 V, 50 Hz, max. 6 A constant load. LS1-230 / LightDim LD1-230 DALI - LightDim, high voltage leading edge dimmer as pcb for dimming of main voltage lamps up to 150 W or devices for low voltage halogen lamps up to 105 VA. With DALI status LED. For the integration in the basic body of the MultiCompactAdaptor or an OEM body. 230 / 240 V, 50 Hz, max. 150 W ohmic load. LD1-230 / LED Controller LC4-350 Digital 4 channel RGBW LED Controller with 4 outputs à 350 ma constant current as pcb. Input voltage VDC depending on the used LED module. Suitable for connection to DALI or DMX / RDM with integrated double interface. Power supply via VDC connector. A plug connection for external status (not contained in the shipment) LED exists. DALI configuration via 4 single DALI addresses LC4-350 / LED Controller LC4-350 Digital 4 channel RGBW LED Controller with 4 outputs à 350 ma constant current as pcb. Input voltage VDC depending on the used LED module. Suitable for connection to DALI or DMX / RDM with integrated double interface. Power supply via VDC connector. A plug connection for external status (not contained in the shipment) LED exists. DALI configuration via 1 DALI address according to DALI colour standard DA209 LC4-350 /

11 LED Controller LC4CA Digital 4 channel RGBW LED Controller with 4 outputs max. 2.0 A constant current suitable for installation on a DIN rail. Input voltage VDC depending on the used LED module. Suitable for connection to DALI or DMX / RDM with integrated double interface. Power supply via VDC connector. DALI configuration via 4 single DALI addresses LC4CA / LED Controller LC4CA Digital 4 channel RGBW LED Controller with 4 outputs max. 2.0 A constant current suitable for installation on a DIN rail. Input voltage VDC depending on the used LED module. Suitable for connection to DALI or DMX / RDM with integrated double interface. Power supply via VDC connector. DALI configuration via 1 DALI address according to DALI colour standard DA209 LC4CA / System implementation SYS1 Travel to and from the project, accommodation for two technicians. Technician hours for inserting addresses or configuring the data bus members Technician hours for programming the system parameter, setting and allocating of IP addresses, programing of all components, allocating scenes according to the details (planner, owner, contracting body) Training of staff to operate the system. Precondition for implementing is an installed and validated system according to the wiring documents. All power circuits are tested and the ballasts are installed operational (luminaires with inserted lamp). The implementation date has to be notified and be confirmed in writing at least 3 weeks before implementation. INTELLIGENT LIGHTING / LICHT MANUFAKTUR SYS1 System planning and designing SYS2 The planning and designing includes the graphical planning with wiring documents. After programming revision and program documents are generated. INTELLIGENT LIGHTING / LICHT MANUFAKTUR SYS2

12 Touchpanel PC X for wall installation Delivery of a complete preconfigured touch PC, Windows XP/7 based. To operate the following lighting software: Composer Software (Free download from Intelligentlighting.de) LightingTab Software (Free demo version download from Intelligentlighting.de) VisioTab Visualisation Software (software not included, has to be ordered separately) Hardware features: Fanless Panel PC with X / X cm Display Resistive Touchscreen Resolution min: 800 x 600 IP65 front panel Compact design Low-power CPU HDD or SSD storage Network 10/100 Base-T LAN Bootable Compact-Flash-Slot for CF Typ I/II 2x USB 2.0 Delivery without software / software installation INTELLIGENT LIGHTING / LICHT MANUFAKTUR TP X /

13 VisioTab Visualisation-Software For the Intelligent Lighting NetComposer system Via visualisation theoretically different systems can be controlled. Practically this is limited by the amount of interfaces within the pc-network. Via a special developed DALI-IP-interface DALI commands can be set of directly via the Ethernet. The free insert of HEX-code enables the display of incremental encoder and the controlling of step motors. User interface: Any number of pages can be set up which are able to interleave like websites. So lots of pages can be shown without multiple defining. Using the navigation buttons one can navigate between the single pages. Via free programmable buttons functions like scene calling, dimming, turning movements, sequences and many more can be realised. In addition it is possible to call more than one function of different systems by one button. It is possible to call functions to pre-defined times. Via the display of pictures the user surface is designable user defined with all common picture formats like bmp, jpg, png, gif, tif, tga. The customer can program any number of groups or scenes without programming knowledge. Also the scene name can be adjusted after a scene changing. The feedback of scenes can be displayed in different shapes and colours depending on the percentage. The handling of the feedback happens via separate message buttons or integrated applying buttons for all devices. With the visualisation any number of setting interfaces can be configured. Buttons are freely configurable in colour and graphical design. For all pages, buttons and controller different passwords can be set. Labels as letters and numbers can be allocated to different groups. When applying a label it changes colours for the whole group respective to the group membership. This realises an easy navigation through the display surface. The visualisation can be spread to several PCs. So each computer can display a different or the same surface. INTELLIGENT LIGHTING / LICHT MANUFAKTUR VisioTab / Display pages VisioTab-NAV Design of the visualisation, complete with all navigation buttons for switching display pages. INTELLIGENT LIGHTING / LICHT MANUFAKTUR VisioTab-NAV Data points VisioTab-DPX A data point contains the input and output of the visualisation in sense of a set of commands for controlling the connected system. INTELLIGENT LIGHTING / LICHT MANUFAKTUR VisioTab-DPX