MAGNETIC/OPTICAL PERIPHERAL CONTROLLERS

Size: px

Start display at page:

Download "MAGNETIC/OPTICAL PERIPHERAL CONTROLLERS"

Leo Pitts
5 years ago
Views:

1 MAGNETIC/OPTICA PERIPERA CTROERS TABE OF CTENTS OF MAGNETIC/OPTICA PERIPERA CTROERS GO39 - GO310 ST506 / MFM GO391 ST506 / MFM W1002A WX1 GO ST506 / MFM... - GO7 ST506 / MFM... - W1002/WA GO06 ST506 / MFM W1003/WA2 GO71 COMBO ST506 / MFM / Int. 3: W1006V /WA2 GO727 - COMBO ST506 / MFM/Int. 1: W1003 RA-2 GO723 COMBO ST506 / R / Int. 2: W1003 WA GO717 ST506 / MFM / Int. 3: W1005 WA GO720 ESI / Int. 3: W1007 WA GO72 ESI / Int. 1: W1007A/WA2 GO733 COMBO ESI / Int. 1: W1007V-SE2 GO535 COMBO ESI W1009V GO565 ESI PERIPERA CTROER BOAR GO52 SCSI AR ISK CTROER BOAR GO610 SCSI AR ISK CTROER BOAR PRIME 2 SUPER I/O CTROER BOAR PRIME IIC SUPER I/O CTROER BOAR GO71/GO7 STREAMG TAPE CTROER BOAR ASC-1 TERFACE BOAR ASC-2 SCSI TERFACE BOAR TEGRATE AT C-ROM CTROER BOAR ASC-2F SCSI TERFACE BOAR ASC/PCI-2F (AA-290) SCSI TERFACE BOAR MAGNETIC/OPTICA PERIPERA CTROERS -1

2 GO39 - GO310 ST506 / MFM (For M2 with BIOS 1.10 or 1.21) 9 0 IP-SWITC 7 FUNCTI ARESS 7 I/O address 320 * C BIOS address C00:0* 00:0 BQA1A FUNCTI ARESS 9 0 imensions hard disk sectors 26 Byte 512 Byte * 102 Byte BIOS enable Enabled * isabled IP-SWITC RIVE C: AR ISK MOE CAPACITY NUMBER S SW SW7 SW CYERS Standard Wren I full Standard Segate ST2 (**) OPE.XM 5220 Miniscribe 3 (**) 10 MB 30 MB 5 MB EAS 5 RIVE : AR ISK MOE CAPACITY NUMBER S S S S CYERS Standard Wren I full Standard Segate ST2 (**) OPE.XM 5220 Miniscribe 3 (**) 10 MB 30 MB 5 MB EAS 5 (*) Normal position (**) Managed only BIOS ev NOTE: Formatting of the.t.c. hard disk is not compatible with W.. formatting. -2 MAGNETIC/OPTICA PERIPERA CTROERS

3 GO391 ST506 / MFM (For M2 - M2 SP with BIOS P90) rive data rive C data Signals W7 W BQA2A JUMP. POS. FUNCTI Normal operation * Test Normal operation * Test ROM BIOS on controller board ROM BIOS on system board * Normal position JUMP. POS. FUNCTI W W7 I/O address I/O 320 * I/O address 32 ROM BIOS 32 K or 6 K * ROM BIOS 16 K Reduced Current CAB Reduced Current 16 CAB * IRQ 5 * IRQ 2 IP-SWITC S S S SW S S SW7 SW MOE CAP. CI. TES. Wren I Full Standard XM 5220 Miniscribe 3 Seagate ST2 30 MB 10 MB MAGNETIC/OPTICA PERIPERA CTROERS -3

4 W1002A WX1 GO ST506 / MFM (For M2 - M2 SP BIOS 1.36/1.3 - M20) W W S JUMP. POS. FUNCTI W ROM BIOS on controller board ROM BIOS on system board * I/O address 320 * I/O address 32 ROM BIOS 32 K or 6 K * ROM BIOS 16 K IP-SWITC BSA5A JUMP. POS. FUNCTI W7 W Reduced Current CAB Reduced Current 16 CAB * IRQ 5 * IRQ 2 Two hard disk controllers * One hard disk controller * efault Position P.C. M2 SP M Unit C Unit Capacity Cyl. ead imensions 30 MB 10 MB 0 MB 0 MB 0 MB " full 5." slim 5." slim 5." slim 5." slim 5." slim 3.5" 3.5" 3.5" 3.5" 3.5" 3.5" GO77 ST506 / MFM (For M20) JP6 JP S JUMP. POS. FUNCTI JP JP6 Normal Recording Current IP-SWITC S Same as on the GO board. BSA5A - MAGNETIC/OPTICA PERIPERA CTROERS

5 W1002/WA GO06 ST506 / MFM (For M2) Ground: Black - 5 V: Red J BPAA JUMP. POS. N * FUNCTI Primary address 1F0 * Primary address 170 Mode of operation SEECTI OF TE AR ISK SYSTEM SET-UP TYPE NOTE: MA channel = 3 Interrupt =1. * efault Position TYPE CAPACITY CY. EAS MOE SIZE ACCESS TIME MB 0 MB 0 MB 0 MB 6 MB 6 MB 0 MB 0 MB Standard 10 MB XM5221 / Seagate ST2 XM530 NEC 516 WREN II 9205/51 Micropolis 13 WREN II 9155/6 Micropolis 1323 A XM 5220 / NEC 5126 NEC 5126 Seagate ST W1003/WA2 GO71 COMBO ST506/MFM Int. 3:1(For M2 - M20) E E BPA3A JUMPER POSITI FUNCTI E1 - E2 - E3 E - E5 - E6 E7 - E - E9 E2 - E3 E5 - E6 E7 - E U registers as primary adapter * FU registers as primary adapter Speed selection SEECTI OF TE AR ISK SYSTEM SETUP TYPE Same as that of board GO06. * efault Position NOTE: On M2 P.C. BIOS RE is needed to install this controller. MAGNETIC/OPTICA PERIPERA CTROERS -5

6 W1006V /WA2 GO727 - COMBO ST506/MFM/Int. 1:1 (For M290) W W9 * efault Position W W7 0 BBA - RIVE 1 / - RIVE 2 Position Function Position Function 3 - Record mode 9-10 ook Ahead track MFM * R AR NRZ isabled Enabled * ata decode type If unit 1 is different from unit 2 Unit 1 is the same as unit 2 * 5-6 Reserved 13-1 ata buffer dimensions Not used Normal 32 Kb Kb * 7 - Number of ECC Bytes Reserved 7 Byte Byte * Not used Normal * NOTE: If recording mode of unit 1 is different from that of drive 2, then set jumper of to the position. Floppy isk controller W Floppy isk I/O addresses Position Function Position Function 5." and 3.5" 720 KB units 3.5" 1. MB unit ard isk I/O addresses W Speed of the drives Position Function Position Function Secondary address Primary address 1F0-1F7 Secondary address Primary address 3F0-3F7 Normal Twin speed W7 ROM BIOS selection and addresses W9 Precompensation Position Function Position Function C00 - C9FFF CA00 - CBFFF CC00 - CFFF ROM disabled 0 NOTE: 1. MB and 720 KB drives cannot be installed together ns/300 Kbps 1 ns ogic ground always -6 MAGNETIC/OPTICA PERIPERA CTROERS

7 W1003 RA-2 GO723 COMBO ST506/R/Int. 2:1 (For M20 - M30 C) J3 J J5 J1 J3 U 2 J U 1 J1 FU J5 U data E E BRA1A JUMPER POSITI FUNCTI E1 - E2 - E3 E - E5 - E6 E7 - E - E9 E2 - E3 E5 - E6 E7 - E ard isk register addresses 1F0-1F7 Floppy isk register addresses 3F0-3F7 Floppy type selection SEECTI OF TE AR ISK SYSTEM SETUP TYPE TYPE CAPACITY CY. EAS MOE SIZE ACCESS TIME MB 62 MB 91 5 NEC 517 CC WREN II W1003 WA GO717 ST506/MFM/Int. 3:1(For M30) W BRA2A JUMP. POS. FUNCTI JUMP. POS. FUNCTI Operating mode non-latched Operating mode latched W Twin-drive support ( cyl. 2 ds.) Normal * Primary address 1F0-1F7 * Secondary address Normal * RESET (only if 1-2 is ) SEECTI OF AR ISK SYSTEM SETUP TYPE Current recording mode Normal * STEP speed Normal * TYPE CAPACITY CY. EAS MOE SIZE ACCESS TIME MB 0 MB 6 MB 6 MB * efault position XM530 NEC 516 Micropolis 13 CC WREN II " Full 5." Full MAGNETIC/OPTICA PERIPERA CTROERS -7

8 W1005 WA GO720 ESI/Int. 3:1 (For M30) BP5A JUMPER POSITI FUNCTI Normal Normal Extra address enable Primary address 1F0-1F7 * Secondary address * efault Position SEECTI OF TE AR ISK SYSTEM SETUP TYPE TYPE CAPACITY CY.. EAS MOE SIZE ACCESS TIME MB 135 MB Micropolis 1355 NEC 5652 / Fujitsu M226 5." Full 5." Full W1007 WA GO72 ESI/Int. 1:1 (For M30 XP) W 5 BNA1A JUMPER POSITI FUNCTI W Mode of operation Sector slip 5 ECC selection NOTE: On the board there are 15 jumpers from to 5. owever it is only possible to get at jumpers W SEECTI OF TE AR ISK SYSTEM SETUP TYPE TYPE CAPACITY CY. EAS MOE SIZE ACCESS TIME MB 0 MB 135 MB 135 MB NEC 155/Micropolis 155 CC WREN NEC 5652/Fujitsu 226 Micropolis " Full 5." Full 5." Full 20 - MAGNETIC/OPTICA PERIPERA CTROERS

9 W1007A/WA2 GO733 COMBO ESI/Int. 1:1 (For M30/XP - M30/XP7) 3 W7 W W W9 0 BOA1A - BIOS addresses BIOS buffer Function Position Function C00 - C9FFF CA00 - CBFFF CC00 - CFFF CE000 - CFFFF isabled * Enabled W - 3 Floppy isk controller Spindle Motor Speed W 3 Function Position Function Enabled * isabled 1 Speed * 2 Speed Floppy isk controller addresses W7 Unit type A Position Function Position Function 37X 3FX * W Mode of operation 0 Input mode W 1005 W 1007 * Non-atched * atched 2 ard isk controller addresses 1FX * 17X 5," 1.2 MB * 3.5" 1. MB W9 Physical and logic ground Not connected * Connected 1 isk Change Floppy disk Sector Slip Active * Non-active Enabled * Non-enabled 5 ECC selection NOTE: Jumpers W9 - * 7 Byte * Byte 0-2 are wired on the board. SEECTI OF TE AR ISK SYSTEM SET-UP TYPE * efault Position TYPE CAPACITY CY. EAS MOE SIZE ACCESS TIME MB 135 MB Micropolis 155 NEC 5655 Micropolis 165 / 7 5." Full MAGNETIC/OPTICA PERIPERA CTROERS -9

10 W1007V-SE2 GO535 COMBO ESI (M30/XP9) W7 JUMPER BOCK JUMPER POSITI FUNCTI isable cache Enable cache ECC 7 bit ECC bit isable translation Enable translation Reserved 35 sectors per track Software selectable sectors number per track Enable alternate sector isable alternate sector JUMPER : Floppy disk single speed drive : Not used - Floppy disk dual speed drive AN 2 JUMPER POSITI FUNCTI 2 I/O address range of board for floppy disk and primary hard disk controller (3FX, 37X) 2 I/O address range of board for floppy disk and secondary hard disk controller (1FX, 17X) W7 Position ard disk interrupt level IRQ1 Posizion ard disk interrupt level IRQ MB U STAATI VIA USER ISKETTE Select a specific value for hard disk type according to the operating system to be installed in the system as shown below: Value of hard disk type 3 SCO UNIX, AT&T.0 UNIX Value of hard disk type 39 Can be used by any operating system, but limits the hard disk capacity to 52 MB Value of hard disk type 0 Olivetti OS, Olivetti OS/2-10 MAGNETIC/OPTICA PERIPERA CTROERS

11 W1009V GO565 ESI PERIPERAS CTROER BOAR (For M6 ESI) RIVE 1 RIVE 1 U SEG. FOPPY J6 J3 J J5 J1 W W7 JUMPER BOCK JUMPER BOCK P POS. FUNCTI ** Enable hard disk isable hard disk ard disk primary address ard disk secondary address MA6 MA7 Interrupt channel selection Enable BIOS isable BIOS BIOS primary address BIOS secondary address Cache function enabled Cache function disabled ECC byte ECC 7 byte 35 sectors / 53 tracks Physical operation mode Translation enabled Translation disabled Alternate sectors function disabled Alternate sectors function enabled ** P P 17-1 TERRUPT IRQ1 IRQ13 IRQ12 IRQ11 JUMPER Board ground not connected to logic ground Board ground connected to logic ground P POS. FUNCTI Enable floppy isable floppy MA 2 MA 3 Floppy primary address Floppy secondary address Single speed for 1.2 MB 5." drive ual speed for 1.2 MB 5." drive JUMPER BOCK P POS. FUNCTI rive floppy disk type AT (3.5 1." MB) rive floppy disk type PS2 (3.5 1." MB) JUMPER BOCK P POS. FUNCTI Third floppy disk connected with a twisted cable Third floppy disk connected with a not twisted cable JUMPER W7 EISA selfconfiguration disabled EISA selfconfiguration enabled JUMPER W Board always enabled Board enabled only by host computer MAGNETIC/OPTICA PERIPERA CTROERS -11

12 GO52 SCSI AR ISK CTROER BOAR (For M0-30, M0-0) TERNA SCSI CABE EPROM 0C1 CPU MCA CNECTOR EPROM AGA7A Board GO52 must be configured with SCSI I 7 and the terminator installed. The terminator is installed on the cable. The system s first hard disk must be configured with SCSI I 6 and have the terminators installed. A second hard disk can be configured with a SCSI I ranging from 0 to 5. SCSI I USE 0 Available for expansion 1 Available for expansion - Used by the second U 2 Available for expansion 3 Available for expansion Available for expansion 5 Available for expansion 7 Board GO52 I -12 MAGNETIC/OPTICA PERIPERA CTROERS

13 GO610 SCSI AR ISK CTROER BOAR (For M0-30, M0-0) MEMORY CACE TERNA SCSI CNECTOR RAM EPROM GATE ARRAY 0C1 CPU MCA CNECTOR EPROM ESA3A Board GO610 must be configured with SCSI I 7 and have the terminator installed. The system s first hard disk must be configured with SCSI I 6 and have the terminators installed. A second hard disk can be configured with a SCSI I ranging from 0 to 5. SCSI I USE 0 Available for expansion 1 Available for expansion- Used by the second U 2 Available for expansion 3 Available for expansion Available for expansion 5 Available for expansion 6 First hard disk installed in the system 7 GO610 board I MAGNETIC/OPTICA PERIPERA CTROERS -13

14 PRIME 2 SUPER I/O CTROER BOAR (For the PCS 30 / 0, PCS2 with T BOX) AR ISK E CNECTOR AR ISK CNECTOR FOPPY ISK CNECTOR 2 N SERIA CNECTOR 1 ST SERIA CNECTOR JOYSTICK PORT PRIME 2 SUPER I/O CTROER PARAE CNECTOR J2 J J6 J J10 J12 J1 J3 J5 J7 J9 J11 EWB6A EVICE JUMP. SETTG FUNCTI Floppy disk interface IE AT hard disk interface AT U interf. addresses XT U interf. addresses AT or XT U selection J1 J2 J3 J J5 J6 Serial port 1 J7 J Serial port 2 J9 J10 Parallel port J11 J12 Enables the floppy disk interface isables the floppy disk interface Addresses the floppy disk interface at 3F0-3F7 h Addresses the floppy disk interface at h Enables the hard disk interface isables the hard disk interface Addresses the AT U interf. at 1F0-1F7 h & 3F6-3F7 h Addresses the AT U interf. at h & h Addresses the XT U interf. at h Addresses the XT U interf. at h IE AT hard disk IE XT hard disk Enables serial port 1 isables serial port 1 Addresses serial port 1 at 3F-3FF h & IRQ (COM1) Addresses aerial port 1 at 3E-3EF h & IRQ (COM3) Enables serial port 2 isables serial port 2 Addresses serial port 2 at 2F-2FF h & IRQ3 (COM2) Addresses serial port 2 at 2E-2EF h & IRQ (COM) Enables the parallel port isables the parallel port Addresses the parallel port at 37-37F h & IRQ7 (PT1) Addresses the parallel port at 27-27F h & IRQ7 (PT2) -1 MAGNETIC/OPTICA PERIPERA CTROERS

15 PRIME 2 SUPER I/O CTROER BOAR (For the PCS2 with SIM T BOX) 1 ST SERIA CNECTOR AR ISK CNECTOR FOPPY ISK CNECTOR 2 N SERIA CNECTOR PRIME 2 SUPER I/O CTROER PARAE CNECTOR J2 J J6 J J10 J12 J1 J3 J5 J7 J9 J11 GC1A EVICE JUMP. SET. FUNCTI Floppy disk interface J1 J2 IE AT hard disk J3 interface AT hard disk J interface address COM 1 J5 Serial port 1 J6 COM2 Serial port 2 J7 J Parallel port J9 J10 Enables the floppy disk interface isables the floppy disk interface Addresses the floppy disk interface at 3F0-3F7h Addresses the floppy disk interface at h Enables the hard disk interface isables the hard disk interface Addresses the AT U interf. at 1F0-1F7h & 3F6-3F7h Addresses the AT U interf. at h & h Enables the serial port 1 isables the serial port 1 Addresses serial port 1 at 3F-3FFh & IRQ (COM1) Adresses serial port 1 at 3E-3EFh & IRQ (COM3) Enables serial port 2 isables serial port 2 Addresses serial port 2 at 2F-2FFh & IRQ3 (COM2) Addresses serial port 2 at 2E-2EFh & IRQ3 (COM) Enables the parallel port isables the parallel port Addresses the parallel port at 37-37Fh & IRQ7 (PT1) Addresses the parallel port at 27-27F & IRQ7 (PT2) MAGNETIC/OPTICA PERIPERA CTROERS -15

16 PRIME IIC SUPER I/O CTROER BOAR (For the PCS2 with T BOX) U E CNECTOR FOPPY ISK CNECTOR 2 N SERIA CNECTOR 1 ST SERIA CNECTOR GAME PORT AR ISK CNECTOR PRIME 2 SUPER I/O CTROER PARAE CNECTOR 1 3 J1 J2 J3 J J5 J6 J7 J J9 J10 J11 EVICE JUMP. SET. FUNCTI Floppy disk interface IE AT hard disk interface AT hard disk interface address J1 J2 J3 J Game Port J5 Parallel port J6 Parallel port address J7 Enables the floppy disk interface isables the floppy disk interface Addresses the floppy disk interface at 3F0-3F7h Addresses the floppy disk interface at h Enables the hard disk interface isables the hard disk interface Addresses the AT U interface at 1F0-1F7h & 3F6-3F7h Addresses the AT U interface at h & h Enables the game port isables the game port Enables the parallel port isables the parallel port Addresses the parallel port at 37-37Fh & IRQ7 (PT1) Addresses the parallel port at 27-27F & IRQ7 (PT2) -16 MAGNETIC/OPTICA PERIPERA CTROERS

17 EVICE JUMP. SET. FUNCTI COM 1 Serial port 1 Serial port 1 address COM 2 Serial port 2 Serial port 2 address J J9 J10 J11 Enables serial port 1 isables serial port 1 Addresses serial port 1 at 3F-3FFh & IRQ (COM1) Addresses serial port 1 at 3E-3EFh & IRQ (COM3) Enables serial port 2 isables serial port 2 Addresses serial port 2 at 2F-2FFh & IRQ3 (COM2) Addresses serial port 2 at 2E-2EFh & IRQ3 (COM) MAGNETIC/OPTICA PERIPERA CTROERS -17

P750 CHARACTERISTICS. SYSTEM BOARD BA849 - P1.5-4 MB BA858 - P1.5-2 MB BA880 - P2.1 - Base Assembly BA865 - P2.1-4 MB BA875 - P2.

P750 CHARACTERISTICS. SYSTEM BOARD BA849 - P1.5-4 MB BA858 - P1.5-2 MB BA880 - P2.1 - Base Assembly BA865 - P2.1-4 MB BA875 - P2. P70 CHARACTERISTICS Microprocessor Intel Clock 2 MHz Architecture MICROCHANNEL Memory System board can support MB installed on 2 banks: Two configurations are possible: 2 MB on system board ( SIMM 2 Kb