360 KB FDU PANASONIC JU C09 SA450
|
|
|
- Loreen Owen
- 6 years ago
- Views:
Transcription
1 360 KB FDU PANASIC JU C09 SA450 3 JUMPER DESCRIPTI SETTING DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 MX Drive selected by the Drive Select signal DS Drive selection enabled in a multidrive system RD Ready signal enabled DC Stores door closure WP Write Protect signal enabled MM Drive motor enabled by the Motor On signal MS Drive motor enabled by the Drive Select signal UA Front LED handled by the In Use signal DA Front LED handled by the Drive Select signal RY PC XT-AT compatibility TM Terminator 5.25" FLOPPY DISK DRIVES 3-5
2 360 KB FDU PANASIC JU C09 SA450 DA UA JUMPER DESCRIPTI SETTING DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 MX Drive selected permanently MM Drive motor enabled by the Motor On signal MS Drive motor enabled by the Drive Select signal UA Front LED handled by the In Use signal DA Front LED handled by the Drive Select signal RY PC XT-AT compatibility TM Terminator " FLOPPY DISK DRIVES
3 1.2 MB FDU PANASIC JU C08 SA450 JUMPER DESCRIPTI SETTING TM Terminator DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 DS Selection of a drive in a multidrive system enabled MX Drive selected permanently AT Drive for use in the system enabled AX Stores the Drive Select signal RDY Standard Ready signal LR Stores the Ready signal DC Stores door closure DS Door open BX Double speed CX Single speed IRD Internal Ready signal SP Step Disk Change DX Index Disk Change DO Disk Change drive selection UA Front LED controlled by the Ready signal DA Front LED controlled by the Drive Select signal OA Front LED controlled by the Ready or Drive Select signal HA Front LED controlled by the Ready and Drive Select signals MM Motor drive enabled by the Motor On signal MB Motor drive enabled by the Drive Select signal " FLOPPY DISK DRIVES
4 1.2 MB FDU PANASIC JU C08 PANASIC JU C20 SA " FLOPPY DISK DRIVES 3-13
5 JUMPER DESCRIPTI JU C08 JU C20 TM Terminator DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 MX Drive selected permanently DA Front LED controlled by the Drive Select signal UA Front LED controlled by the Ready signal HA Front LED controlled by the Ready and Drive Select signals LA Front LED controlled by the Ready signal selecting the drive MS Motor drive enabled by the Drive Select signal MM Motor drive enabled by the Motor On signal HS HL Head loading controlled by the Drive Select signal (not used) Head loading controlled by the Drive Select and Ready signals (not used) HM Head loading controlled by the Motor On signal (not used) OP Dual Mode 1M Single Mode (only 1 MB) BX Double speed NAX Used with OP, BX and 1M EX Active index after head positioning on any track TH Interface connector pin 34 selected by the Drive Select signal DD Not used MDB Pin 34 is kept low by Drive Select when the MDA support is not inserted and by the first Drive Select when the support has been changed " FLOPPY DISK DRIVES
6 1.2 MB FDU PANASIC JU C08 PANASIC JU C20 SA " FLOPPY DISK DRIVES 3-15
7 JUMPER DESCRIPTI JU C08 JU C20 TM Terminator DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 MX Drive selected permanently (used on single drive systems only) UA Front LED controlled by the Ready signal DA Front LED controlled by the Drive Select signal LA Front LED controlled by the stored Ready function HA Front LED controlled by the Ready and Drive Select signals MS Motor drive enabled by the Motor On signal HL Head loading controlled by the Drive Select and Ready signals (not used) HS Head loading controlled by the Drive Select signal (not used) HM Head loading controlled by the Motor On signal HL1 Head loading controlled the stored Ready function (not used) PH Dual mode (positive high density) NH Dual mode (negative high density) (not used) AX Mode Select with the storage of Drive Select 1M Single Mode (only 1 MB) BX Double speed RDY Standard Ready signal DC Disk Change 1 (reset via Step) NDO Disk In DO Disk Out DD Disk Change 2 (reset via Drive Select) TH GX Pin 34 of the interface connector selected by Drive Select Read Data is enabled by Write Gate, Write Protect, Drive Select and when the head is positioned on a track EX Active index following the positioning of the head on a track 1E Selects 96 TPI or 48 TPI (set at the factory) RY Connects the Drive Status signal to interface connector pin 34 (set at the factory) ST Not used OF Not used " FLOPPY DISK DRIVES
8 1.2 MB FDU PANASIC JU C08 (to lev. 02) PANASIC JU C20 SA " FLOPPY DISK DRIVES 3-17
9 JUMPER DESCRIPTI JU C08 JU C20 TM Terminator DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 DA Front LED controlled with the Drive Select signal HA Front LED controlled with the Ready and Drive Select signals MS Motor drive enabled with the Motor On signal HL Head loading controlled by Drive Select and Ready (not used) HS Head loading controlled by Drive Select (not used) OP Dual Mode (high density positive) AT Enables drive for use in system AX Mode Select with storage of Drive Select 1M Single Mode (only 1 MB) BX Double speed RDY Standard Ready signal DC Disk change 1 (reset via step) DD Disk change 2 (reset via Drive Select) TH Pin 34 of interface connector selected by Drive Select GX Read Data enabled by Write Gate, Write Protect, Drive Select and when the head has set on a track EX Index active after the head has set on a track 1E Select 96 TPI or 48 TPI (set in the factory) RY Connects Drive Status to pin 34 of the interface connector ST Not used OF Not used " FLOPPY DISK DRIVES
10 1.2 MB FDU PANASIC JU C08 (from lev. 03) PANASIC JU A72 PANASIC JU A08W SA450 3 Note: Jumpers EX, GX, DD and TH have been removed from drive JU C08 starting from this drive s level 03 (March, 94). To set the disk change mode 2 on this drive (as used on L1 with GO280D, FP1 fw2.4, FP4 fw3.7), solder a 15 Khom resistor at R18. The JU C20 drive will no longer be available from March, 1994; instead, you can use drive JU C08 by inserting jumper BX. JUMPER DESCRIPTI SETTING TM Termination DS1 Drive selected as DRIVE 1 DS2 Drive selected as DRIVE 2 DS3 Drive selected as DRIVE 3 DS4 Drive selected as DRIVE 4 DA Front LED handled by the Drive Select signal HA Front LED handled by the Ready and Drive Select signals MS Drive motor enabled by the Motor On signal OP Dual mode (positive high density) AT Enables the drive for use in the system AX Mode Select with Drive Select storage 1M Single Mode (only 1 MB) BX Dual speed RDY Standard Ready signal DC Disk Change 1 (reset via Setup) 5.25" FLOPPY DISK DRIVES 3-19
MITSUBISHI ELECTRIC 5.25 INCH FLEXIBLE DISK DRIVES
MITSUBISHI ELECTRIC 5.25 INCH FLEXIBLE DISK DRIVES MF501B MF503B MF504B 0.5 MB 1.0 MB 1.6 MB SPECIFICATIONS and APPLICATION NOTES The Mitsubishi MF500B range of double sided 5¼ inch flexible disk drives
Chapter 19. Floppy Disk Controller Discussion. Floppy Disk Controller 127
Floppy Disk Controller 127 Chapter 19 Floppy Disk Controller 19-1. Discussion Without some "mass storage" device such as a floppy disk, even the largest computer would still be just a toy. The SK68K can
Internal Floppy Disk Drive
MPF920-Z Internal Floppy Disk Drive Easy to install 3.5" floppy disk drive for Microsoft Windows operating systems MPF920-Z Compatible with 720 kb and 1.44 MB 3.5" floppy disks Replaceable front panel
PCS42. i MHz i MHz i MHz internal (25 MHz system) i MHz internal (33 MHz system) 25 MHz or 33 MHz
PCS42 CHARACTERISTICS Microprocessor Clock Architecture i486 SX @ 25 MHz i486 SX @ MHz i486 DX @ MHz i486 DX2 @ 50 MHz internal (25 MHz system) i486 DX2 @ 66 MHz internal ( MHz system) 25 MHz or MHz ISA
5.25" Floppy Disk Drive
5.25" Floppy Disk Drive Stock No. 237-088 1.0 Introduction 1.1 General description This drive is a high-density, dual speed, double-sided 5.25" mini-floppy disk drive. The speed is controlled by Pin #2
Product Specifications
Product Specifications 3.5 FLOPPY DISK DRIVE 25.4 mm HEIGHT 2.0/1.6/1.0 MB 3 MODE TYPE Supports Three Capacity Modes The YD-702D series provides for three capacity modes (2.0/1.6/1.0MB) to meet the requirements
Connecting a Cisco Input Module
CHAPTER 4 Overview The optional Cisco Input Module (Figure 4-1) is attached to a Cisco Physical Access Gateway or Cisco Reader Module to provide additional connections for up to ten input devices. Each
MK6411MAT (HDD2143) 2.5-INCH HARD DISK DRIVE USER MANUAL
TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK6411MAT (HDD2143) 2.5-INCH HARD DISK DRIVE USER MANUAL Rev 02 11/2006 CONTENTS Introduction...1 Setup...2 Using the HDD...4
Time Left. sec(s) Quiz Start Time: 12:13 AM. Question # 5 of 10 ( Start time: 12:18:29 AM ) Total Marks: 1
64 Quiz Start Time: 12:13 AM Question # 5 of 10 ( Start time: 12:18:29 AM ) Total Marks: 1 The root directory of floppy contains fixed entries 64 256 128 512 77 Quiz Start Time: 12:13 AM Question # 6 of
Model: Z1DA-78A. 3.5 Micro Floppy Disk Drive. Specification
Model: Z1DA-78A 3.5 Micro Floppy Disk Drive Specification Citizen Systems Europe Park House, 643 651 Staines Road, Feltham. TW14 8PA. Tel: +44 20 8893 1900 www.citizen.co.uk Table of Contents TABLE OF
Customer Maintenance Parts List
C US R MODEL SUFFIX Customer Maintenance Parts List Model 0 R0000 dot recorder Made in China RECORDER STYLE FREQUENCY NO. SUPPLY N00 0 TAG NO. Note: Parts marked with a symbol are Customer Maintenance
Model # Date Wiring Diagram # Door No. #
Replacement and Installation Instructions MA-100 Logic Controller Replacement Board MGO/MGO-GD/MGO-HD & MSWG Note: Read this manual carefully before replacing the existing board and place this installation
Code segment Stack segment
Registers Most of the registers contain data/instruction offsets within 64 KB memory segment. There are four different 64 KB segments for instructions, stack, data and extra data. To specify where in 1
DS1233A 3.3V EconoReset
3.3V EconoReset www.maxim-ic.com FEATURES Automatically restarts microprocessor after power failure Monitors pushbutton for external override Internal circuitry debounces pushbutton switch Maintains reset
MK6022GAX (HDD2184) 2.5-INCH HARD DISK DRIVE USER MANUAL
TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK6022GAX (HDD2184) 2.5-INCH HARD DISK DRIVE USER MANUAL Rev 02 11/2006 CONTENTS Introduction...1 Setup...2 Using the HDD...4
The user must set the setting terminal (CN2) and SCSI terminating resistor before installing the HDD in the system.
MAW/MAX Series Jumper Setting Contents Product Line MAW3300NP/NC, MAW3147NP/NC, MAW3073NP/NC MAX3147NP/NC, MAX3073NP/NC, MAX3036NP/NC Contents 1. Setting Terminals (NP model only) 2. SCSI ID setting (NP
M CHARACTERISTICS. Microprocessor HARRIS /AMD MOTHERBOARD BA 278
M290-30 CHARACTERISTICS Microprocessor HARRIS /AMD 80286 Clock 20 MHz RAM access time 100 ns Capacity min/max The system can address up 17 MB BANK A 1 MB of soldered RAM BANK 1 Two sockets, where 1 MB
Wiring Inside the card reader you will see a circuit board. The connections are as follows:
Power Adaptor (12VDC, Max. Current: 1A) If you purchased the Cardlock Series power supply cut the head of the adaptor and strip the insulation. If your locking mechanism, electric strike or magnetic lock
DATA TECHNOLOGY. c o R p o R A T o N INSTALLATION GUIDE FOR THE 7280 PC/AT 1:1 INTERLEAVE WINCHESTER & FLOPPY DISK CONTROLLER
1 DATA TECHNOLOGY c o R p o R A T o N INSTALLATION GUIDE FOR THE 7280 PC/AT 1:1 INTERLEAVE WINCHESTER & FLOPPY DISK CONTROLLER I COPYRIGHT (C) PREFACE 1988 Data Technology Corporation. All rights reserved
Roland AC Adapter Compatibility Guide
Roland AC Adapter Compatibility Guide A-30/33/37 ACA-120 A-300PRO A-500PRO A-500S A-800PRO AC-2/3 PSA-120 AC-33 PSB-12U X AD-3/8 PSA-120 AD-5 ACF-120 AF-70 BRC-120 X AR-100/200 ACI-120 X ASC-10 PSA-120
Computational Logic. SLD resolution. Damiano Zanardini
Computational Logic SLD resolution Damiano Zanardini UPM European Master in Computational Logic (EMCL) School of Computer Science Technical University of Madrid damiano@fi.upm.es Academic Year 2009/2010
The following describes the jumper options and settings available on the Maxtor Atlas II disk drive.
50-pin The following describes the jumper options and settings available on the Maxtor Atlas II disk drive. Maxtor Atlas II was developed by Quantum Corporation prior to its merger with Maxtor. Termination
Memory Interfacing & decoding. Intel CPU s
Memory Interfacing & decoding in Intel CPU s Outline Address decoding Chip select Memory configurations Minimum Mode - - A19 - A19 - Simplified Drawing of 8088 Minimum Mode MEMORY MEMW When Memory is selected?
EX104-BX Ver. 1 Rel. 09/01/04
C.E. Electronics, Inc. 0 Industrial Drive Bryan, OH 4506 PH (49) 66-605 FX (49) 66-56 www.ceelectronics.com EX04-BX Ver. Rel. 09/0/04 ELITE PI R 0.4" Elite PI The Micro Comm Elite PI is the most flexible
User's Guide. CIO-RELAY08 CIO-RELAY16 CIO-RELAY24 CIO-RELAY32
User's Guide http://www.omega.com e-mail: info@omega.com CIO-RELAY CIO-RELAY6 CIO-RELAY CIO-RELAY3 For Your Notes Table of Contents INTRODUCTION.... ACCESSORIES... QUICK START.... Install the InstaCalTM
User s Manual Single Board Computer Version A1, June 2007
User s Manual Single Board Computer 3307900 Version A1, June 2007 Copyrights This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated
Program controlled semiconductor device (IC) which fetches (from memory), decodes and executes instructions.
8086 Microprocessor Microprocessor Program controlled semiconductor device (IC) which fetches (from memory), decodes and executes instructions. It is used as CPU (Central Processing Unit) in computers.
I2C-AI418S I2C Bus Voltage and Current Analog Input Board
I2C-AI48 I2C Bus Voltage and Current Analog Input Board Features 4 Channels Of Analog Inputs MCP3424, 2,4,6 and 8-Bit Voltage Input: -5V, -V Current Input: -2mA, 4-2mA, -4mA I2C Bus Interface Khz, 4Khz,
GENISYS MICROLOK-PLUS TM
IUNION SWITCH & SIGNAL I [WI A member of the ANSALDO Group 5800 Corporate Drive Pittsburgh, PA 15237 SERVICE MANUAL 6301 -m~m111111m1 1 1 1mm111 II Installation Procedures - Hard and Dual-Floppy Disks
Math 2 Spring Unit 5 Bundle Transformational Graphing and Inverse Variation
Math 2 Spring 2017 Unit 5 Bundle Transformational Graphing and Inverse Variation 1 Contents Transformations of Functions Day 1... 3 Transformations with Functions Day 1 HW... 10 Transformations with Functions
Using TLS3-GD2 Guardlocking Interlock with ArmorBlock Guard I/O and SmartGuard Controller
Safety Application Example Using TLS3-GD2 Guardlocking Interlock with ArmorBlock Guard I/O and SmartGuard Controller Guardlocking with On-machine Components Safety Rating: Category 3, according to EN954-1
Hardware Configuration Setting
Hardware Configuration Setting This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on ROBO-8920VG2 are in the proper position.
CM102 IDE and Floppy Controller utilitymodule User s Manual
CM102 IDE and Floppy Controller utilitymodule User s Manual BDM-610020012 Rev. A CM102 IDE and Floppy utilitymodule User s Manual RTD Embedded Technologies, INC. 103 Innovation Blvd. State College, PA
OVERVIEW. Facts & Data Micro & Mini Computers Designed by VUVT Zilina, Czechoslovakia (now Slovak Republic)
OVERVIEW Facts & Data Micro & Mini Computers Designed by VUVT Zilina, Czechoslovakia (now Slovak Republic) A. Family of 16-bit Real-Time Computers 1. RPP 16 M - address path 16 bits - number of instructions
Chapter 02: Computer Organization. Lesson 02: Functional units and components in a computer organization- Part 1: Processor
Chapter 02: Computer Organization Lesson 02: Functional units and components in a computer organization- Part 1: Processor Objective Understand functional units in Processor Understand execution unit,
Omega 4K/UHD Scaler for HDBaseT and HDMI with USB
Omega 4K/UHD Scaler for HDBaseT and HDMI with USB The Atlona is an HDBaseT receiver and 4K/UHD scaler with a local HDMI input. Part of the Omega Series of integration products for modern AV communications
MSI-PM1033. HMC86508 Flat Panel Control Module
MSI-PM1033 HMC86508 Flat Panel Control Module The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment
OptiStep Hardware Manual
OptiStep Hardware Manual Document Revision D4 May 16, 2018 MICROKINETICS CORPORATION 3380 Town Point Drive Suite 330 Kennesaw, GA 30144 Tel: (770) 422-7845 Fax: (770) 422-7854 www.microkinetics.com Table
Automation Interface Requirements for System I/O Interface of a DPC I Welding System
- 1 - Automation Interface Requirements for System I/O Interface of a DPC I Welding System The DPC I welding system offer several features that are intended to communicate with automation. These features
Intelligent Motion Controller for VME Bus Computers
VS4 ISO 9001 CERTIFIED Intelligent Motion Controller for VME Bus Computers VS4 FEATURES Controller capability! Up to four axes of stepper control with encoder feedback Communications! VME bus! Interrupt
https://support.industry.siemens.com/cs/ww/en/view/
Support Packages for TIA Portal V14 February 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The
TEAC FD-235HG-C805/C817/C897 MICRO FLOPPY DISK DRIVE SPECIFICATION
TEAC FD-235HG-C805/C817/C897 MICRO FLOPPY DISK DRIVE SPECIFICATION Rev. A 8421 35 sheets in Total TABLE OF CONTENTS 1. OUTLINE...1 2. DISK...2 3. PHYSICAL SPECIFICATION...3 4. OPERATIONAL CHARACTERISTICS...5
VARDHAMAN COLLEGE OF ENGINEERING (AUTONOMOUS) Shamshabad, Hyderabad
Introduction to MS-DOS Debugger DEBUG In this laboratory, we will use DEBUG program and learn how to: 1. Examine and modify the contents of the 8086 s internal registers, and dedicated parts of the memory
Model 2000 Programmer EnSonic Display & Control Unit. Document code: M2KCNF.001
Model 2000 Programmer EnSonic Display & Control Unit Document code: 10735.M2KCNF.001 Document Model 2000 Programmer: EnSonic Display & Control Unit Document code 10735.M2KCNF.001 Date January 25, 2004
CPLD/FPGA Development System
Chapter 1 CPLD/FPGA Development System As shown in Figure 1-1, CPLD (Complex Programmable Logic Device) and FPGA (Field-Programmable Gate Array) are the programmable logic devices (PLDs) whose internal
Intel 8086 MICROPROCESSOR ARCHITECTURE
Intel 8086 MICROPROCESSOR ARCHITECTURE 1 Features It is a 16-bit μp. 8086 has a 20 bit address bus can access up to 2 20 memory locations (1 MB). It can support up to 64K I/O ports. It provides 14, 16
EISA Series Desktop. Computer Specifications. Processor Board. Main System Board. Mass Storage Bays. EISA configuration.
diskette release diskette release E latch button \ I I option slots Five 32-bit EISA expansion slots (l6-bit and 8-bit ISA compatible); bus-mastering option cards allowable in all slots Internal; operation
M CHARACTERISTICS MOTHERBOARD 3 MB
M300-04 CHARACTERISTICS Microprocessor Clock Architecture Memory Memory access Coprocessor Floppy Disk Hard Disk Streaming Tape Slots Video adapter HDU and FDU controller INTEL 386SX 0 MHz XT/AT with 3-bit
Hardware- / Firmware-Installation Modules
Hardware- / Firmware-Installation Modules A X5 X6 X7 X8 X9 X0 X X X K K + X9 X0 BR BR BR BR X RXD TXD RXD TXD H H H SRAM D5 EPROM D6 µ P 68B09 D7 D8 S D DUSSC D S D D-P RAM Document no. Edition Supersedes
HOW TO INSTALL 3.5" STANDARD IBM FLOPPY DRIVES IN A RADIO SHACK MODEL III OR MODEL IV
HOW TO INSTALL 3.5" STANDARD IBM FLOPPY DRIVES IN A RADIO SHACK MODEL III OR MODEL IV My goal is to get two 3.5 Standard IBM Style Floppy drives working on my Model IV, without modifying the actual 3.5
GUIDE TO SP STARTER SHIELD (V3.0)
OVERVIEW: The SP Starter shield provides a complete learning platform for beginners and newbies. The board is equipped with loads of sensors and components like relays, user button, LED, IR Remote and
sirius Switching. Protecting. Starting. SIRIUS Product Overview
sirius Switching. Protecting. Starting. SIRIUS Product Overview S00 Design Direct-on-line starting Reversing duty Assembly kit for busbar mounting 0 mm: RA9 -C 0 mm: RA9 -D Consisting of: wiring kit busbar
Proactive System Check Supported Product List as of March 27, 2018
Proactive System Check Supported Product List as of March 27, 2018 Expansions - no PSC price as attached within base unit price Tape drives - no PSC price as attached within base unit price Racks - no
=============.'=:: OWNER'S MANUAL. Model B Floppy Disk (;ontroller ===='===========:=== 1'-5 California Computer Syste~s=
=============.'=:: OWNER'S MANUAL Model 2422 -B Floppy Disk (;ontroller ===='===========:=== 1'-5 California Computer Syste~s=-.....-..., ", MODEL 2422 MULTIMODE FLOPPY DISK CONTROLLER REFERENCE MANUAL
FDC+ Enhanced Floppy Disk Controller for the Altair 8800 Computer User s Manual
FDC+ Enhanced Floppy Disk Controller for the Altair 8800 Computer User s Manual Table of Contents 1.0 Introduction... 1 1.1 Items Included... 2 1.2 Online Resources... 2 2.0 Board Configuration... 3 2.1
TMC428 Evaluation Kit V2.0 Manual English
TMC428 Evaluation Kit V2.0 Manual English Version: 2.01 July 30 th, 2002 2 TMC428 Evaluation Kit V2.01 Version Version Date Author Remarks 2.00 2002-07-29 OK Created from version 1.02 2.01 2002-07-30 OK
2.5 Solid State Disk. Description. Features. Placement. Dimensions. Transcend Information Inc. Side Millimeters Inches
Description Due to smaller size (fit the standard dimensions of 2.5 IDE Hard Disk Drives), huge capacity, high speed, and low power consumption, Solid State Disk is perfect replacement storage device for
Type A Sign Part Replacement (pn SP): Controller, Turbo, TuneBlaster Boards and Hard Disk Drive
November 18, 2004 AlphaVision PC Sign Part Replacement Instructions 1.0 Type A Sign Part Replacement (pn 1127-9424SP): Controller, Turbo, TuneBlaster Boards and Hard Disk Drive Type A Sign Part Replacement
Yokogawa Suite SKU: KWP-YKWDE0-PRD
Yokogawa Suite SKU: KWP-YKWDE0-PRD Component Drivers Yokogawa CX Yokogawa Darwin Ethernet Yokogawa Darwin Serial Yokogawa DX Ethernet Yokogawa DX Serial Yokogawa DXP Yokogawa HR Yokogawa MW Yokogawa MX
Organization Row Address Column Address Bank Address Auto Precharge 128Mx8 (1GB) based module A0-A13 A0-A9 BA0-BA2 A10
GENERAL DESCRIPTION The Gigaram is ECC Registered Dual-Die DIMM with 1.25inch (30.00mm) height based on DDR2 technology. DIMMs are available as ECC modules in 256Mx72 (2GByte) organization and density,
CAUTION. 2. Do not change the setting of terminals except following setting pins during the power is turned on.
5.3 Setting Terminals A user sets up the following terminals and SCSI terminating resistor before installing the IDD in the system as required. Setting terminal: CN2 (MP model only) Figures 5.2 shows the
AR-721E-V2 (AR-721E-V2-X) AR-701B-X Fit 35mm DIN Rail or Mount directly 16,000 32,000. Connector CN18 Host TCP/IP. Code Pin Description
SOYAL ACCESS CTROL SYSTEM AR-E-V V0 Contents Product User Guide Panel Mounting Base (AR-E-V-X) Metal Box (AR-E-V-M) Option Option Specification CPU Memory Power Supply Power Consumption Interface / Baud
INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual. PCMNET V 7. xx
INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual PCMNET V 7. xx INTEGRATED SYSTEMS AND CONTROLS, INC. PCMNET Users Manual Revised 2/4/2005 2003-2005 Integrated Systems and Control. Inc. PO Box
I2C-AI418ML I2C-bus Voltage and Current Analog Input Board with over-voltage protection
I2C-I48ML I2C-bus Voltage and Current nalog Input Board with over-voltage protection Features 4 channels of analog inputs MCP3424, 2,4,6 and 8-bit Input voltage range: -5V, -V Input current range: -2m,
8086 Microprocessors & Peripherals
8086 Microprocessors & Peripherals (06IT/BM - 52) Sessions handled by Prof. M.V. SREENIVAS RAO. GSSSIETW, MYSORE Prof. M. SHIVAKUMAR. BIET, DAVANGERE Prof. VAGEESH.V.KANTLI. BIET, DAVANGERE 1 8086 MICROPROCESSOR
Amiga Floppy Drive Compatibility List
Amiga Floppy Drive Compatibility List Since a disk drive is by nature a moving part, it is inevitable that it will fail someday. The vast majority of Amiga computers out there are least a decade old (some
Quantification. Using the suggested notation, symbolize the statements expressed by the following sentences.
Quantification In this and subsequent chapters, we will develop a more formal system of dealing with categorical statements, one that will be much more flexible than traditional logic, allow a deeper analysis
Greco Systems DU-58. Operation Manual. A division of e-dnc Inc. 303 E Gurley St. #522 Prescott, AZ USA
G r e c o S y s t e m s DU-58 Operation Manual Greco Systems A division of e-dnc Inc. 303 E Gurley St. #522 Prescott, AZ 86301 USA 800-234-7326 COPYRIGHT 1984 GRECO SYSTEMS. ALL RIGHTS RESERVED. The hardware
8086 INTERNAL ARCHITECTURE
8086 INTERNAL ARCHITECTURE Segment 2 Intel 8086 Microprocessor The 8086 CPU is divided into two independent functional parts: a) The Bus interface unit (BIU) b) Execution Unit (EU) Dividing the work between
UNIPORT V2. Uniport V2
UNIPORT V2 Uniport V2 USB powered Parallel port interconnection board with optical isolated inputs, buffered outputs, charge pump interlock and power relays Specification Full optical isolation of all
Read First! 1^00-3lG - 755;
4-634-979-01 CSP'960H/CSP-960S TM Read First! 1^00-3lG - 755; Installation Guide CSP-960H/CSP-960S TM Drive Unit Read First! Installation Guide Trademarks and Copyrights Q J J Sony and Spres.sa 960 are
Notes - Computer Hardware Basics
The Computer A computer is made up of many parts: Notes - Computer Hardware Basics 1. Input/Output (I/O) devices These allow you to send information to the computer or get information from the computer.
Motor driver board. EB022
Motor driver board www.matrixmultimedia.com EB022 Contents About this document 3 Board layout 3 General information 4 Circuit description 5 Circuit diagram 6 2 Copyright About this document This document
Microprocessor. By Mrs. R.P.Chaudhari Mrs.P.S.Patil
Microprocessor By Mrs. R.P.Chaudhari Mrs.P.S.Patil Chapter 1 Basics of Microprocessor CO-Draw Architecture Of 8085 Salient Features of 8085 It is a 8 bit microprocessor. It is manufactured with N-MOS technology.
Release Note. How to Use the OptoCon Connection Module. 1 Introduction. Option C Revision 4 Revised 8/13/98
33 South La Patera Lane Santa Barbara, CA 93117-3214 ph (805) 681-3300 fax (805) 681-3311 tech@motioneng.com www.motioneng.com Release Note How to Use the OptoCon Connection Module Option C002-0007 Revision
SPARC Workgroup Servers
4 SPARC Workgroup Servers 4-43 SPARC Workgroup Servers Product Line Overview Product Specifications Ultra 5S Sun Enterprise Ultra 10S Multiprocessing No CPUs 1 Processor UltraSPARC -IIi Clock speed 360
8M x 64 Bit PC-100 SDRAM DIMM
PC-100 SYNCHRONOUS DRAM DIMM 64814ESEM4G09TWF 168 Pin 8Mx64 (Formerly 64814ESEM4G09T) Unbuffered, 4k Refresh, 3.3V with SPD Pin Assignment General Description The module is a 8Mx64 bit, 9 chip, 168 Pin
LV-681. Mini-ITX motherboard. User s Manual. Edition: /04/09. LV-681 User s Manual 1
LV-681 Mini-ITX motherboard User s Manual Edition: 1.00 2007/04/09 LV-681 User s Manual 1 Copyright The trademarks mentioned in the manual are legally registered to their respective companies. Disclaimer
Organization Row Address Column Address Bank Address Auto Precharge 256Mx4 (1GB) based module A0-A13 A0-A9 BA0-BA2 A10
GENERAL DESCRIPTION The Gigaram GR2DR4BD-E4GBXXXVLP is a 512M bit x 72 DDDR2 SDRAM high density ECC REGISTERED DIMM. The GR2DR4BD-E4GBXXXVLP consists of eighteen CMOS 512M x 4 STACKED DDR2 SDRAMs for 4GB
Computer Specifications
power (speed) light hard disk access light power - button Controllers Video Diskette Hard disk nterfaces External VESA local bus video cam supports high resolution displays (preinstailed on systems sold
Genmega ATM Error Codes
Genmega ATM Error Codes Code Description Remedy 20001 Unable to load a cassette. Remove and replace cassette - Check the micro-switch located on the inside left wall of the 20002 Low Cash. "Low Cash Warning"
DELTA TAU DATA SYSTEMS, INC. POWER PMAC UMAC CPU BOARD HARDWARE REFERENCE
DELTA TAU DATA SYSTEMS, INC. ` POWER PMAC UMAC CPU BOARD HARDWARE REFERENCE DOCUMENT # 3A0-604020-360 PRELIMINARY May, 2009 Delta Tau Data Systems 21314 Lassen St. Chatsworth, CA 91311 Ph: (818) 998-2095
16-Bit Intel Processor Architecture
IBM-PC Organization 16-Bit Intel Processor Architecture A-16 bit microprocessor can operate on 16 bits of data at a time. 8086/8088 have the simplest structure 8086/8088 have the same instruction set,
H89-Z37 DOUBLE-DENSITY FLOPPY CONTROLLER
H8-Z37 DOUBLE DENSITY FLOPPY CONTROLLER 2015 H89-Z37 DOUBLE-DENSITY FLOPPY CONTROLLER Norberto Collado norby@koyado.com 6/6/2015 Revision History and Disclaimer Revision History Revision Date Comments
ADR7700. RS232 / Data Acquisition Interface USER MANUAL V 1.0
ADR7700 RS232 / Data Acquisition Interface USER MANUAL V 1.0 Caution: The ADR7700 is a static sensitive device. Observe proper procedures for handling static sensitive devices. ONTRAK CONTROL SYSTEMS INC.
How-To #7: Assemble an H-bridge Circuit Board
How-To #7: Assemble an H-bridge Circuit Board Making a DC motor turn is relatively easy: simply connect the motor's terminals to a power supply. But what if the motor is to be controlled by an Arduino,
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
CMT6118 IDE Controller and Compact Flash Carrier with Floppy utilitymodule User s Manual
CMT6118 IDE Controller and Compact Flash Carrier with Floppy utilitymodule User s Manual BDM-610020044 Rev. A CMT6118 ISOLATED IDE Controller and Compact Flash Carrier with Floppy utilitymodule User s
Lecture 5: Computer Organization Instruction Execution. Computer Organization Block Diagram. Components. General Purpose Registers.
Lecture 5: Computer Organization Instruction Execution Computer Organization Addressing Buses Fetch-Execute Cycle Computer Organization CPU Control Unit U Input Output Memory Components Control Unit fetches
Arrakis Systems 6604 Powell Street / Loveland, Colorado 80538
Arrakis Systems 6604 Powell Street / Loveland, Colorado 80538 Input and Output wiring for the 150sc, 500sc, 2000sc and 2100sc audio consoles. A Input Channel Wiring (Back of Console) 6. Left Input 5. Left
MICROPROCESSOR PROGRAMMING AND SYSTEM DESIGN
MICROPROCESSOR PROGRAMMING AND SYSTEM DESIGN ROAD MAP SDK-86 Intel 8086 Features 8086 Block Diagram 8086 Architecture Bus Interface Unit Execution Unit 8086 Architecture 8086 Programmer s Model Flag Register
solutions for teaching and learning
RKP18Motor Component List and Instructions PCB layout Constructed PCB Schematic Diagram RKP18Motor Project PCB Page 1 Description The RKP18Motor project PCB has been designed to use PIC microcontrollers
PQA500 Picture Quality Analyzer Declassification and Security Instructions
PQA500 Picture Quality Analyzer Declassification and Security Instructions www.tektronix.com 071-2266-00 Copyright Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its
Aport-214PG FreeRTOS Programmable Device Server Hardware Guide
Aport-214PG FreeRTOS Programmable Device Server Hardware Guide Version: 1.0 2018 APR. Copyright Artila Electronics Co., Ltd. All Rights Reserved Trademarks The Artila logo is a registered trademark of
TEAC FD-235HF-A529/A540/A591 MICRO FLOPPY DISK DRIVE SPECIFICATION
TEAC FD-235HF-A529/A540/A591 MICRO FLOPPY DISK DRIVE SPECIFICATION Rev. B 1574b 38 sheets in Total TABLE OF CONTENTS Title Page 1. OUTLINE... 1 2. DISK... 2 3. PHYSICAL SPECIFICATION... 3 4. OPERATIONAL
Computer Maintenance. PC Disassembly and Reassembly. Copyright Texas Education Agency, All rights reserved.
Computer Maintenance PC Disassembly and Reassembly 1 Enabling Objectives Computer Chassis (Cases) Power Supplies Configuring the Motherboard Configuring the Connectors CPU Interfaces RAM Installing a Hard
Experiment 3. TITLE Optional: Write here the Title of your program.model SMALL This directive defines the memory model used in the program.
Experiment 3 Introduction: In this experiment the students are exposed to the structure of an assembly language program and the definition of data variables and constants. Objectives: Assembly language
HopperOne S11 Std Pulse
HopperOne S11 Std Pulse Operator s manual Rev. 1.02 HopperOne S11 Std Pulse Standard / Reverse Operator s Manual 1. General description Congratulations for your purchase of the Alberici HopperOne S11!
Back to. Communication Products Group. Technical Notes. Local/Remote Control and Functional Description, 1:1 Redundant Switching Unit, One Rack Unit
Back to Communication Products Group Technical Notes 25T008 Local/Remote Control and Functional Description, 1:1 Redundant Switching Unit, One Rack Unit MITEQ TECHNICAL NOTE 25T008 MAY 1997 REV D LOCAL/REMOTE
AX-12. PIC12F675 microcontroller Activity board
AX- PICF67 microcontroller Activity board Optional of AX- board DC adaptor 9-V Small stepper motor Microcontroller unit features : Microchip s 8-pin PIC microocntroller PICF67 on-board KWord Program memory