091R supplement to Catalog 09 SOLID CARBIDE REAMERS
|
|
- Andra Singleton
- 6 years ago
- Views:
Transcription
1 091R supplement to Catalog 09 W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W LI LI LI LI LI I I I I I LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI su SOLID CARBIDE
2 " " (1.49mm mm) Solid Carbide Submicron Grain Straight - RHC Standard 45 Lead Chamfer 0 45 TOLERANCES d1 d2.0590".2509" ( mm) ".0000" ( mm).2510".5020" ( mm) ".0000" ( mm).0590".2509" ( mm) ".0000" ( mm).2510".5020" ( mm) ".0000" ( mm) Metric Length Length Length " " 1-1/2" 3/8".250".049" " " 1-1/2" 3/8".250".049" " # " 1-1/2" 3/8".250".050" " " 1-1/2" 3/8".250".050" " " 1-1/2" 3/8".250".051" " " 1-1/2" 3/8".250".051" " " 1-1/2" 3/8".250".052" " " 1-1/2" 3/8".250".052" " 1/16" " 1-1/2" 3/8".250".053" " " 1-1/2" 3/8".250".053" " # " 1-1/2" 3/8".250".054" " " 1-1/2" 3/8".250".054" " " 1-1/2" 3/8".250".055" " " 1-1/2" 3/8".250".055" " " 1-3/4" 1/2".250".056" " # " 1-3/4" 1/2".250".057" " " 1-3/4" 1/2".375".058" " " 1-3/4" 1/2".375".059" " # " 1-3/4" 1/2".375".060" " " 1-3/4" 1/2".375".061" " " 1-3/4" 1/2".375".062" " # " 1-3/4" 1/2".375".063" " " 1-3/4" 1/2".375".064" " " 1-3/4" 1/2".375".065" " # " 1-3/4" 1/2".375".066" " " 1-3/4" 1/2".375".067" " " 1-3/4" 1/2".375".068" " 5/64" " 1-3/4" 1/2".375".068" " # " 1-3/4" 1/2".375".069" " " 1-3/4" 1/2".375".069" " " 1-3/4" 1/2".375".069" " " 1-3/4" 1/2".375".070" " # " 2" 1/2".375".071" " # " 2" 1/2".375".072" " " 2" 1/2".375".073" " " 2" 1/2".375".074" " " 2" 1/2".375".075" " # " 2" 1/2".375".076" " " 2" 1/2".375".077" Metric equivalents are for reference only
3 .0880" " (2.24mm mm) Metric Length Length Length " " 2" 1/2".375".078" " # " 2" 1/2".375".079" " " 2" 1/2".375".080" " " 2" 1/2".375".081" " " 2" 1/2".375".082" " " 2" 1/2".375".082" " " 2" 1/2".375".083" " " 2" 1/2".375".083" " # " 2" 1/2".375".084" " 3/32" " 2" 1/2".375".084" " " 2" 1/2".375".084" " " 2" 1/2".375".085" " " 2" 1/2".375".085" " # " 2-1/4" 5/8".375".086" " " 2-1/4" 5/8".375".087" " # " 2-1/4" 5/8".375".088" " " 2-1/4" 5/8".375".088" " " 2-1/4" 5/8".500".089" " # " 2-1/4" 5/8".500".090" " " 2-1/4" 5/8".500".090" " " 2-1/4" 5/8".500".091" " # " 2-1/4" 5/8".500".092" " " 2-1/4" 5/8".500".092" " " 2-1/4" 5/8".500".093" " # " 2-1/4" 5/8".500".094" " " 2-1/4" 5/8".500".095" " " 2-1/4" 5/8".500".096" " # " 2-1/4" 5/8".500".097" " " 2-1/4" 5/8".500".097" " " 2-1/4" 5/8".500".098" " " 2-1/4" 5/8".500".099" " 7/64" " 2-1/4" 5/8".500".099" " # " 2-1/4" 5/8".500".100" " # " 2-1/4" 5/8".500".101" " " 2-1/4" 5/8".500".102" " # " 2-1/4" 5/8".500".103" " " 2-1/4" 5/8".500".104" " " 2-1/4" 5/8".500".105" " # " 2-1/4" 5/8".500".106" " " 2-1/4" 5/8".500".107" " " 2-1/4" 5/8".500".108" " " 2-1/4" 5/8".500".108" " " 2-1/4" 5/8".500".109" " # " 2-1/4" 5/8".500".110" " " 2-1/4" 5/8".500".111" " " 2-1/4" 5/8".500".112" " " 2-1/4" 5/8".500".113" " " 2-1/4" 5/8".500".114" " " 2-1/4" 5/8".500".114" continued? fax
4 .1245" " (3.16mm mm) Metric Length Length Length " " 2-1/4" 5/8".500".115" " " 2-1/4" 5/8".500".115" " 1/8" " 2-1/4" 5/8".500".115" " " 2-1/4" 5/8".500".116" " " 2-1/4" 5/8".500".116" " " 2-1/4" 5/8".500".117" " " 2-1/4" 5/8".500".117" " " 2-1/4" 5/8".500".118" " " 2-1/4" 5/8".500".118" " # " 2-1/4" 5/8".500".119" " " 2-1/4" 5/8".500".119" " " 2-1/4" 5/8".500".120" " " 2-1/2" 3/4".500".121" " " 2-1/2" 3/4".500".122" " " 2-1/2" 3/4".500".123" " " 2-1/2" 3/4".500".124" " " 2-1/2" 3/4".500".125" " # " 2-1/2" 3/4".500".126" " " 2-1/2" 3/4".500".127" " " 2-1/2" 3/4".500".128" " " 2-1/2" 3/4".500".128" " " 2-1/2" 3/4".500".129" " " 2-1/2" 3/4".500".130" " # " 2-1/2" 3/4".500".131" " 9/64" " 2-1/2" 3/4".500".131" " " 2-1/2" 3/4".500".131" " " 2-1/2" 3/4".500".132" " " 2-1/2" 3/4".500".133" " # " 2-1/2" 3/4".500".134" " " 2-1/2" 3/4".500".135" " " 2-1/2" 3/4".500".136" " # " 2-1/2" 3/4".500".137" " " 2-1/2" 3/4".500".138" " " 2-1/2" 3/4".500".139" " # " 2-1/2" 3/4".500".140" " " 2-1/2" 3/4".500".140" " " 2-1/2" 3/4".500".141" " # " 2-1/2" 3/4".500".142" " " 2-1/2" 3/4".500".143" " # " 2-1/2" 3/4".500".144" " " 2-1/2" 3/4".500".145" " " 2-1/2" 3/4".500".145" " " 2-1/2" 3/4".500".146" " " 2-1/2" 3/4".500".146" " 5/32" " 2-1/2" 3/4".500".146" " " 2-1/2" 3/4".500".147" " # " 2-1/2" 3/4".500".147" " " 2-1/2" 3/4".500".148" " " 2-1/2" 3/4".500".148" Metric equivalents are for reference only
5 .1590" " (4.03mm mm) Metric Length Length Length " # " 2-1/2" 3/4".500".149" " " 2-3/4" 7/8".625".150" " # " 2-3/4" 7/8".625".151" " " 2-3/4" 7/8".625".152" " " 2-3/4" 7/8".625".153" " " 2-3/4" 7/8".625".154" " " 2-3/4" 7/8".625".155" " # " 2-3/4" 7/8".625".156" " " 2-3/4" 7/8".625".157" " " 2-3/4" 7/8".625".158" " " 2-3/4" 7/8".625".159" " # " 2-3/4" 7/8".625".160" " " 2-3/4" 7/8".625".160" " " 2-3/4" 7/8".625".161" " 11/64" " 2-3/4" 7/8".625".162" " " 2-3/4" 7/8".625".162" " # " 2-3/4" 7/8".625".163" " " 2-3/4" 7/8".625".164" " " 2-3/4" 7/8".625".165" " " 2-3/4" 7/8".625".166" " # " 2-3/4" 7/8".625".167" " " 2-3/4" 7/8".625".167" " " 2-3/4" 7/8".625".168" " " 2-3/4" 7/8".625".169" " # " 2-3/4" 7/8".625".170" " " 2-3/4" 7/8".625".171" " # " 2-3/4" 7/8".625".172" " " 2-3/4" 7/8".625".173" " " 2-3/4" 7/8".625".174" " # " 2-3/4" 7/8".625".175" " " 2-3/4" 7/8".625".176" " " 2-3/4" 7/8".625".176" " " 2-3/4" 7/8".625".177" " " 2-3/4" 7/8".625".177" " " 2-3/4" 7/8".625".177" " 3/16" " 2-3/4" 7/8".625".178" " " 2-3/4" 7/8".625".178" " " 2-3/4" 7/8".625".179" " # " 2-3/4" 7/8".625".179" " " 2-3/4" 7/8".625".180" " # " 2-3/4" 7/8".625".181" " " 2-3/4" 7/8".625".182" " " 2-3/4" 7/8".625".183" " # " 2-3/4" 7/8".625".184" " " 2-3/4" 7/8".625".184" " " 2-3/4" 7/8".625".185" " # " 3" 1".625".186" " " 3" 1".625".187" " " 3" 1".625".187" continued? fax
6 .1980" " (5.02mm mm) Metric Length Length Length " " 3" 1".625".188" " # " 3" 1".625".189" " " 3" 1".625".190" " # " 3" 1".625".191" " " 3" 1".625".192" " " 3" 1".625".193" " 13/64" " 3" 1".625".193" " # " 3" 1".625".194" " " 3" 1".625".195" " # " 3" 1".625".196" " " 3" 1".625".196" " " 3" 1".625".197" " " 3" 1".625".198" " # " 3" 1".625".199" " " 3" 1".625".200" " " 3" 1".625".201" " " 3" 1".625".202" " # " 3" 1".625".203" " " 3" 1".625".204" " " 3" 1".625".205" " " 3" 1".625".206" " " 3" 1".625".207" " " 3" 1".625".207" " " 3" 1".625".208" " 7/32" " 3" 1".625".209" " " 3" 1".625".209" " " 3" 1".625".210" " # " 3" 1".625".211" " " 3" 1".625".212" " " 3" 1".625".213" " " 3" 1".625".214" " " 3" 1".625".215" " " 3" 1".625".216" " " 3" 1".625".217" " # " 3" 1".625".218" " " 3" 1".625".219" " " 3" 1".625".220" " " 3" 1".625".221" " " 3" 1".625".222" " " 3" 1".625".223" " A " 3" 1".625".224" " 15/64" " 3" 1".625".224" " " 3" 1".625".225" " " 3" 1".625".226" " " 3" 1".625".226" " " 3" 1".625".227" " B " 3" 1".625".228" " " 3" 1".625".229" " " 3" 1".625".230" Metric equivalents are for reference only
7 .2410" " (6.12mm mm) Metric Length Length Length " " 3" 1".625".231" " C " 3" 1".625".232" " " 3" 1".625".233" " " 3" 1".625".234" " " 3" 1".625".235" " D " 3" 1".625".236" " " 3" 1".625".237" " " 3" 1".625".238" " " 3" 1".625".239" " " 3" 1".625".239" " " 3" 1".625".239" " " 3" 1".625".240" " 1/4" / E " 3" 1".625".240" " " 3" 1".625".240" " " 3" 1".625".240" " " 3" 1".625".241" " " 3" 1".625".242" " " 3" 1".625".242" " " 3" 1".625".243" " " 3" 1".625".244" " " 3-1/4" 1-1/8".625".245" " " 3-1/4" 1-1/8".625".246" " " 3-1/4" 1-1/8".625".246" " F " 3-1/4" 1-1/8".625".247" " " 3-1/4" 1-1/8".625".248" " " 3-1/4" 1-1/8".625".249" " " 3-1/4" 1-1/8".625".250" " G " 3-1/4" 1-1/8".625".251" " " 3-1/4" 1-1/8".625".252" " " 3-1/4" 1-1/8".625".253" " " 3-1/4" 1-1/8".625".254" " " 3-1/4" 1-1/8".625".255" " 17/64" " 3-1/4" 1-1/8".625".256" " H " 3-1/4" 1-1/8".625".256" " " 3-1/4" 1-1/8".625".257" " " 3-1/4" 1-1/8".625".258" " " 3-1/4" 1-1/8".625".259" " " 3-1/4" 1-1/8".625".260" " " 3-1/4" 1-1/8".625".261" " I " 3-1/4" 1-1/8".750".262" " " 3-1/4" 1-1/8".750".263" " " 3-1/4" 1-1/8".750".264" " " 3-1/4" 1-1/8".750".265" " " 3-1/4" 1-1/8".750".266" " " 3-1/4" 1-1/8".750".266" " J " 3-1/4" 1-1/8".750".267" " " 3-1/4" 1-1/8".750".268" " " 3-1/4" 1-1/8".750".269" " " 3-1/4" 1-1/8".750".270" continued? fax
8 .2810" " (7.14mm mm) Metric Length Length Length " K " 3-1/4" 1-1/8".750".271" " 9/32" " 3-1/4" 1-1/8".750".271" " " 3-1/4" 1-1/8".750".272" " " 3-1/4" 1-1/8".750".273" " " 3-1/4" 1-1/8".750".274" " " 3-1/4" 1-1/8".750".275" " " 3-1/4" 1-1/8".750".276" " " 3-1/4" 1-1/8".750".277" " " 3-1/4" 1-1/8".750".278" " " 3-1/4" 1-1/8".750".279" " L " 3-1/4" 1-1/8".750".280" " " 3-1/4" 1-1/8".750".281" " " 3-1/4" 1-1/8".750".282" " " 3-1/4" 1-1/8".750".283" " " 3-1/4" 1-1/8".750".284" " M " 3-1/4" 1-1/8".750".285" " " 3-1/4" 1-1/8".750".285" " " 3-1/4" 1-1/8".750".286" " 19/64" " 3-1/4" 1-1/8".750".287" " " 3-1/4" 1-1/8".750".287" " " 3-1/4" 1-1/8".750".288" " " 3-1/4" 1-1/8".750".289" " " 3-1/4" 1-1/8".750".290" " " 3-1/4" 1-1/8".750".291" " N " 3-1/4" 1-1/8".750".292" " " 3-1/4" 1-1/8".750".293" " " 3-1/4" 1-1/8".750".294" " " 3-1/4" 1-1/8".750".295" " " 3-1/4" 1-1/8".750".296" " " 3-1/4" 1-1/8".750".297" " " 3-1/4" 1-1/8".750".298" " " 3-1/4" 1-1/8".750".299" " " 3-1/4" 1-1/8".750".300" " " 3-1/4" 1-1/8".750".300" " " 3-1/4" 1-1/8".750".301" " " 3-1/4" 1-1/8".750".302" " " 3-1/4" 1-1/8".750".302" " " 3-1/4" 1-1/8".750".302" " 5/16" " 3-1/4" 1-1/8".750".303" " " 3-1/4" 1-1/8".750".303" " " 3-1/4" 1-1/8".750".304" " " 3-1/4" 1-1/8".750".304" " " 3-1/4" 1-1/8".750".305" " O " 3-1/4" 1-1/8".750".306" " " 3-1/4" 1-1/8".750".307" " " 3-1/4" 1-1/8".750".308" " " 3-1/2" 1-1/4".750".309" " " 3-1/2" 1-1/4".750".310" " " 3-1/2" 1-1/4".750".311" Metric equivalents are for reference only
9 .3220" " (8.17mm mm) Metric Length Length Length " " 3-1/2" 1-1/4".750".312" " P " 3-1/2" 1-1/4".750".313" " " 3-1/2" 1-1/4".750".314" " " 3-1/2" 1-1/4".750".315" " " 3-1/2" 1-1/4".750".316" " " 3-1/2" 1-1/4".750".317" " " 3-1/2" 1-1/4".750".318" " 21/64" " 3-1/2" 1-1/4".750".318" " " 3-1/2" 1-1/4".750".319" " " 3-1/2" 1-1/4".750".320" " " 3-1/2" 1-1/4".750".321" " Q " 3-1/2" 1-1/4".750".322" " " 3-1/2" 1-1/4".750".323" " " 3-1/2" 1-1/4".750".324" " " 3-1/2" 1-1/4".750".325" " " 3-1/2" 1-1/4".750".325" " " 3-1/2" 1-1/4".750".326" " " 3-1/2" 1-1/4".750".327" " " 3-1/2" 1-1/4".750".328" " R " 3-1/2" 1-1/4".750".329" " " 3-1/2" 1-1/4".750".330" " " 3-1/2" 1-1/4".750".331" " " 3-1/2" 1-1/4".750".332" " " 3-1/2" 1-1/4".750".333" " 11/32" " 3-1/2" 1-1/4".750".334" " " 3-1/2" 1-1/4".750".334" " " 3-1/2" 1-1/4".750".335" " " 3-1/2" 1-1/4".750".336" " " 3-1/2" 1-1/4".750".337" " S " 3-1/2" 1-1/4".750".338" " " 3-1/2" 1-1/4".750".339" " " 3-1/2" 1-1/4".750".340" " " 3-1/2" 1-1/4".750".341" " " 3-1/2" 1-1/4".750".342" " " 3-1/2" 1-1/4".750".343" " " 3-1/2" 1-1/4".750".344" " " 3-1/2" 1-1/4".750".344" " " 3-1/2" 1-1/4".750".345" " " 3-1/2" 1-1/4".750".346" " " 3-1/2" 1-1/4".750".347" " T " 3-1/2" 1-1/4".750".348" " " 3-1/2" 1-1/4".750".349" " 23/64" " 3-1/2" 1-1/4".750".349" " " 3-1/2" 1-1/4".750".350" " " 3-1/2" 1-1/4".750".351" " " 3-1/2" 1-1/4".750".352" " " 3-1/2" 1-1/4".750".353" " " 3-1/2" 1-1/4".750".354" " " 3-1/2" 1-1/4".750".355" continued? fax
10 .3660" " (9.29mm mm) Metric Length Length Length " " 3-1/2" 1-1/4".750".356" " " 3-1/2" 1-1/4".750".357" " U " 3-1/2" 1-1/4".750".358" " " 3-1/2" 1-1/4".750".359" " " 3-1/2" 1-1/4".750".360" " " 3-1/2" 1-1/4".750".361" " " 3-1/2" 1-1/4".750".362" " " 3-1/2" 1-1/4".750".363" " " 3-1/2" 1-1/4".750".364" " " 3-1/2" 1-1/4".750".365" " " 3-1/2" 1-1/4".750".365" " 3/8" " 3-1/2" 1-1/4".750".365" " " 3-1/2" 1-1/4".750".366" " " 3-1/2" 1-1/4".750".366" " " 3-1/2" 1-1/4".750".367" " V " 3-1/2" 1-1/4".750".367" " " 3-1/2" 1-1/4".750".368" " " 3-1/2" 1-1/4".750".369" " " 3-1/2" 1-1/4".750".370" " " 3-1/2" 1-1/4".750".371" " " 3-1/2" 1-1/4".750".372" " " 3-1/2" 1-1/4".750".373" " " 3-1/2" 1-1/4".750".374" " " 3-1/2" 1-1/4".750".375" " W " 3-1/2" 1-1/4".750".376" " " 3-1/2" 1-1/4".750".377" " " 3-1/2" 1-1/4".750".378" " " 3-1/2" 1-1/4".750".379" " " 3-1/2" 1-1/4".750".380" " 25/64" " 3-1/2" 1-1/4".750".381" " " 3-1/2" 1-1/4".750".381" " " 3-1/2" 1-1/4".750".382" " " 3-1/2" 1-1/4".750".383" " " 3-1/2" 1-1/4".750".384" " " 3-1/2" 1-1/4".750".384" " " 3-1/2" 1-1/4".750".385" " " 3-1/2" 1-1/4".750".386" " X " 3-1/2" 1-1/4".750".387" " " 3-1/2" 1-1/4".750".388" " " 3-1/2" 1-1/4".750".389" " " 3-1/2" 1-1/4".750".390" " " 3-1/2" 1-1/4".750".391" " " 3-1/2" 1-1/4".750".392" " " 3-1/2" 1-1/4".750".393" " Y " 3-1/2" 1-1/4".750".394" " " 3-1/2" 1-1/4".750".395" " " 3-1/2" 1-1/4".750".396" " 13/32" " 3-1/2" 1-1/4".750".396" " " 3-1/2" 1-1/4".750".397" Metric equivalents are for reference only
11 .4080" " (10.36mm mm) Metric Length Length Length " " 3-1/2" 1-1/4".750".398" " " 3-1/2" 1-1/4".750".399" " " 3-1/2" 1-1/4".750".400" " " 3-1/2" 1-1/4".750".401" " " 3-1/2" 1-1/4".750".402" " Z " 3-1/2" 1-1/4".750".403" " " 3-1/2" 1-1/4".750".403" " " 3-1/2" 1-1/4".750".404" " " 3-1/2" 1-1/4".750".405" " " 4" 1-3/8".750".406" " " 4" 1-3/8".750".407" " " 4" 1-3/8".750".408" " " 4" 1-3/8".750".409" " " 4" 1-3/8".750".410" " " 4" 1-3/8".750".411" " 27/64" " 4" 1-3/8".750".412" " " 4" 1-3/8".750".412" " " 4" 1-3/8".750".413" " " 4" 1-3/8".750".414" " " 4" 1-3/8".750".415" " " 4" 1-3/8".750".416" " " 4" 1-3/8".750".417" " " 4" 1-3/8".750".418" " " 4" 1-3/8".750".419" " " 4" 1-3/8".750".420" " " 4" 1-3/8".750".421" " " 4" 1-3/8".750".422" " " 4" 1-3/8".750".423" " " 4" 1-3/8".750".423" " " 4" 1-3/8".750".424" " " 4" 1-3/8".750".425" " " 4" 1-3/8".750".426" " " 4" 1-3/8".750".427" " " 4" 1-3/8".750".427" " " 4" 1-3/8".750".427" " 7/16" " 4" 1-3/8".750".428" " " 4" 1-3/8".750".428" " " 4" 1-3/8".750".429" " " 4" 1-3/8".750".429" " " 4" 1-3/8".750".430" " " 4" 1-3/8".750".431" " " 4" 1-3/8".750".432" " " 4" 1-3/8".750".433" " " 4" 1-3/8".750".434" " " 4" 1-3/8".750".435" " " 4" 1-3/8".750".436" " " 4" 1-3/8".750".437" " " 4" 1-3/8".750".438" " " 4" 1-3/8".750".439" continued? fax
12 .4500" " (11.43mm mm) Metric Length Length Length " " 4" 1-3/8".750".440" " " 4" 1-3/8".750".441" " " 4" 1-3/8".750".442" " " 4" 1-3/8".750".443" " " 4" 1-3/8".750".443" " 29/64" " 4" 1-3/8".750".443" " " 4" 1-3/8".750".444" " " 4" 1-3/8".750".445" " " 4" 1-3/8".750".446" " " 4" 1-3/8".750".447" " " 4" 1-3/8".750".448" " " 4" 1-3/8".750".449" " " 4" 1-3/8".750".450" " " 4" 1-3/8".750".451" " " 4" 1-3/8".750".452" " " 4" 1-3/8".750".453" " " 4" 1-3/8".750".454" " " 4" 1-3/8".750".455" " " 4" 1-3/8".750".456" " " 4" 1-3/8".750".457" " " 4" 1-3/8".750".458" " 15/32" " 4" 1-3/8".750".459" " " 4" 1-3/8".750".459" " " 4" 1-1/2".750".460" " " 4" 1-1/2".750".461" " " 4" 1-1/2".750".462" " " 4" 1-1/2".750".462" " " 4" 1-1/2".750".463" " " 4" 1-1/2".750".464" " " 4" 1-1/2".750".465" " " 4" 1-1/2".750".466" " " 4" 1-1/2".750".467" " " 4" 1-1/2".750".468" " " 4" 1-1/2".750".469" " " 4" 1-1/2".750".470" " " 4" 1-1/2".750".471" " " 4" 1-1/2".750".472" " " 4" 1-1/2".750".473" " " 4" 1-1/2".750".474" " 31/64" " 4" 1-1/2".750".474" " " 4" 1-1/2".750".475" " " 4" 1-1/2".750".476" " " 4" 1-1/2".750".477" " " 4" 1-1/2".750".478" " " 4" 1-1/2".750".479" " " 4" 1-1/2".750".480" " " 4" 1-1/2".750".481" " " 4" 1-1/2".750".482" " " 4" 1-1/2".750".482" Metric equivalents are for reference only
13 .4930" " (12.52mm mm) Metric Length Length Length " " 4" 1-1/2".750".483" " " 4" 1-1/2".750".484" " " 4" 1-1/2".750".485" " " 4" 1-1/2".750".486" " " 4" 1-1/2".750".487" " " 4" 1-1/2".750".488" " " 4" 1-1/2".750".489" " " 4" 1-1/2".750".490" " " 4" 1-1/2".750".490" " 1/2" " 4" 1-1/2".750".490" " " 4" 1-1/2".750".491" " " 4" 1-1/2".750".491" " " 4" 1-1/2".750".492" LHS / RHC STR / RHC Special Reamers - Solid Carbide - 2 Week Delivery Solid Carbide Submicron Grain All reamers furnished with a standard 45 Lead Chamfer RHS / RHC Metric Overall Length Flute Length No. of.0590" " /2" 3/8" " " /4" 1/2" " " " 1/2" " " /4" 5/8" " " /2" 3/4" " " /4" 7/8" " " " 1" " " /4" 1-1/8" " " /2" 1-1/4" " " " 1-3/8" " " " 1-1/2" " " " 1-5/8" " " " 1-3/4" fax
14 GARR TOOL Reaming Guide TECHNICAL Type Recommended Chipload Per Tooth (Fz) Rc SFM Hardness Series.0590" ".1251" ".2501" ".3751" " 4100 COBALT BASE ALLOYS Powdered Metal, Stellite, Hs-21, Haynes < /188, X-40, L "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" NICKEL BASE ALLOYS Invar, Kovar, Inconel-625/718, Waspalloy, < Rene, Hastalloy, A "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" IRON BASE ALLOYS Incoloy , Multimet N-155, < Timkin , Carpenter 22-b "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" MOL Monel - 65% Nickel "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" TITANIUM ALLOYS Commercially Pure, 6Al-4V, Astm 1/2/3, 6Al-25N-4Zr-2Mo-Si "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" STAINLESS STEELS (Precipitation) < /8, 15/5, 17-4, ph Types "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" (Austentic) < Inox, 200 Series, 300 Series "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" (Austentic) < L, 316L, Nitronic 50, Inox "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" (Martensitic) < Series "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" HIGH STRENGTH TOOL STEELS 4140, 4340, 6150, 5210, A2, D2, < P20, H11, H13, S2, O "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" MEDIUM ALLOY TOOL STEELS 200, 250, 300, 8620 < "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" CARBON STEELS Platinum, A36, 12L14, < s, 1100 s, 1300 s "-.0009".0006"-.0012".0009"-.0013".0010"-.0017" CAST MATERIAL Steel "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" Ductile Iron "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" Gray Iron "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" Aluminum "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" ALUMINUM Aircraft Grade (6061, 7075) "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" MAGSIUM "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" COPPER Copper Alloys "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" BRASS, BRONZE Brass, Aluminum/Bronze, Low Silicon Bronze "-.0010".0007"-.0012".0010"-.0015".0010"-.0018" COMPOSITE MATERIAL Glass Epoxy, Fiberglass, Plastics, Graphite, G "-.0008".0005"-.0010".0008"-.0012".0010"-.0015" NOTE - ABOVE ARE STARTING PARAMETERS ONLY. HIGHER RESULTS MAY BE ACHIEVED WITH OPTIMUM CONDITIONS Metric equivalents are for reference only
15
16 7800 N Alger Road P.O. Box 489 Alma, Michigan Fax Supplement 091R Sold through select industrial distributors Prices subject to change without notice Copyright 2009 by Garr Tool Company, Alma, Michigan, USA. All Rights Reserved. No part of this publication may be reproduced in any form or by any means without prior written permission from Garr Tool Company. Garr Tool Company makes every effort to ensure accuracy in its publications. We are not responsible for errors in printing should they occur. Printed in the United States.
PR13 / SW05 PR13 05 /13 10 /13 25 SW05. Stable Cutting & Long Tool Life. when machining Difficult-to-cut Materials. PVD Coated Carbide for:
S e r i e s PR13 / G r a d e Stable Cutting & Long Tool Life when machining Difficult-to-cut Materials PR13 05 /13 10 /13 25 PVD Coated for: Nickel-based heat-resistant alloys Iron-based heat-resistant
More informationFor Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
More informationRAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES RESOURCE VALUE. (888)
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES The raw material that is used to manufacture your tool is just as important as the design of the tool itself. By using inferior materials, the tool life
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute Flute Overal Spiral Size Length Length Flute / / / 00 00 / / / 00 00 / / 00 000 / / 00 000
More informationTel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.. / 00..0 (USA & CANADA) / Email sales@msdiscounttool.com FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute
More informationTABLE 1 Metallic Materials SUPERSEDED SPEC./ OBSOLETE MATERIAL DESCRIPTION
TABLE 1 Metallic Materials Aluminum 2024 Bars, Rods, Shapes, Tubing, and Wire; Extruded QQ-A-200/3 AMS-QQ-A-200/3 MMPDS Section 3.2.4 6061 QQ-A-200/8 AMS-QQ-A-200/8 MMPDS Section 3.6.2 7075 1100 Gen T76
More informationVariable Helix (Steel) - Standard Ballnose. Variable Helix (Steel) - Standard Length SEE WEBSITE FOR PRICE DISCOUNTS
6 Variable Flute (Steel) - 4FL - Standard Length < 7 Variable Flute (Steel) - 4FL - Ballnose Standard Length < NEW 8 Variable Flute (Steel) - 4FL - Stub, Long & Long-reach < NEW 9 Variable Flute (Steel)
More informationMetal-Max - Standard Ballnose. Metal-Max - Standard Length. Now available as a coolant thru cutter! AlTiN. AlTiN. MTMXB - Std.
2007 Catalog INDEX 4 Metal-Max - 4FL - Standard Length 5 Metal-Max - 4FL - Ballnose Standard Length 6 Metal-Max - 4FL - Stub, Long & Long-reach length 7 Metal Max - Square Corner - Speeds Chart 8 Metal
More informationHigh Performance Carbide Tools. Standard Carbide* Tools
2007 Catalog High Performance Carbide Tools 6 Metal-Max - 4FL - Standard Length < 7 Metal-Max - 4FL - Ballnose Standard Length < 8 Metal-Max - 4FL - Stub, Long & Long-reach length < 9 Metal Max - Square
More informationPREMIUM QUALITY CUTTING TOOLS FOR PRECISION MACHINING
PREMIUM QUALITY FOR PRECISION MACHINING ENDMILLS DRILLS REAMERS TAPS BURRS SPECIALTY TOOLS AND MORE... A BlackHawk Industrial Corporate Brand Sold Exclusively by BlackHawk Industrial Pioneer Tool is a
More informationTaps - DIN High Performance Tap Range - M, MF - UNC, UNF, UN - G (BSPF) - NPT
Taps Taps - DIN High Performance Tap Range -, F - UNC, UNF, UN - G (BSPF) - NPT Taps Finder - For Synchro Tapping Page Synchro Gun Synchro Gun, IK Synchro Spiral Flute, R50 Synchro Spiral Flute, R50, IK
More informationAQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, D Aqua EX Oil Hole D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 0D, 0D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute D, D Aqua Micro Metric,
More informationP R I C E G U I D E & C A T A L O www.trianglereamer.com G N O. 1 0 0 9 www.trianglereamer.com 103 Gonyeau Road Milton, Vermont 05468 E-mail: reamers@trianglemetalfab.com Phone: 1-802-893-1581 Fax: 1-802-893-1814
More informationIntentionally left blank to reduce file size.
Intentionally left blank to reduce file size. To Our Valued Customers, Welcome to the 2005 edition of our catalog! In this edition, you will find many new tools in such areas as high performance carbide
More informationTWIST DRILLS TWIST DRILLS
TWIST DRILLS Tool Type Standart Qual Ty Coating Page STRAIGHT SHAK ROLL FORGED STRAIGHT SHAK GROUD STRAIGHT SHAK LEFT HAD GORUD STRAIGHT SHAK SILVER SERIES STRAIGHT SHAK GOLD SERIES STRAIGHT SHAK TI COATED
More informationWHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL)
WHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL) Remember 1977? Jimmy Carter took office. The Apple II hit stores. And The Jewell Group started providing quality cutting tool solutions to
More information1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:
1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal
More informationUPDATED. Double your APKT style geometry from 2 to 4 cutting edges! Diameters: Cutter Series: 1TJ1Q, TJ*Q, 1TJ1N, TJ*N, TN1N
s: 1.00-8.00 Cutter Series: 1TJ1Q, TJ*Q, 1TJ1N, TJ*N, TN1N Insert Series: ANU12 ANU16 ZNU16 Materials: Aluminim, Iron, Steel, Stainless Steel, igh-temp Alloys Depth of Cut: ANU12:.43 ANU16:.59 UPDATED
More information100% LAB TESTED. FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time.
100% LAB TESTED FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time. EASY ORDERING Order toll free, by fax, or email, either by part number or
More information100% LAB TESTED. FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time.
100% LAB TESTED FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time. EASY ORDERING Order toll free, by fax, or email, either by part number or
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
More informationp.10 Two Tone Jobbers HSS 118 Point p.10 Bright Finish Jobbers HSS 118 Point
p.10 Two Tone Jobbers HSS 118 Point p.10 Bright Finish Jobbers HSS 118 Point BLACK Oxide p.11 Black Oxide Jobbers HSS 118 Point p.11 Black Oxide Wire Gauge HSS 118 Point p.12 Black Oxide Jobbers HSS 135
More information@ - we deliver only quality goods as we care for nature REMI RATNAMANI SURAJ PRAKASH TUBACEX JFE STEEL CORPORATION WELSPUN DALMINE V & M BALCO NALCO
we deliver only quality goods as we care for nature AVAILABLE MATERIALS MAKES JINDAL STAINLESS LTD (JSL ) ARCELOR ACRONI DKC ACERINOX SUMITOMO METALS NIPPON BAW STEEL ISMT M. S. L. JINDAL SAW HINDALCO
More informationTOP SELLING METAL FABRICATION & FINISHING ABRASIVES
TOP SELLING METAL FABRICATION & FINISHING ABRASIVES XXL Flap Discs Zirconia. 20% more material than XL flap discs. Item # Part # Description Cost 65533236316 CGW 36316 4-1/2 x 7/8 T27 Z3 XXL 40 Grit $5.75
More informationCOMPLETE SATISFACTION EASY ORDERING FAST DELIVERY OVER 4000 ITEMS. Berardo Paradiso President - ITM Corp. Dear ITM Customer:
Dear ITM Customer: We are pleased to present you with our 2017 catalog. Here you will find tested and proven drilling and cutting products made by experts in the design, innovation, and manufacturing of
More information160 UTG-2841 UTG ISU 200C ISU 250C ISU-200D -P
+ Quotation 92 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Model B 2 TT100 Range mm 1. 5 to 99 0. 75-300 Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm With Probe - 1 Probe Rs. 14500
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More informationFLAt cutting-off wheels. Cutting-OFF / dry. for hand held machines. Stainless Steel ZA60Y MAXX
22 Flexovit - ZA60Y MAXX 1.3mm thick Ultra thin NorZon Plus grain, premium grade - for cutting stainless steel, alloy steels & hard ferrous metals. Fast burr-free cutting & long life ZA60Y MAXX Premium
More informationTechnical Information
Technical Information Quality LUKAS HSS burrs are manufactured from high quality and well proven HSS. Our automatic flute grinding machines and our own heat treatment plant guarantee a top quality product.
More informationISU-300D ULTRASONIC THICKNESS GAUGE OPERATION MANUAL
MN-ISU-00D-E www.insize.com ISU-00D ULTRASONIC THICKNESS GAUGE OPERATION MANUAL Attention Specification Of Transducers In order to obtain good measurement precision, you need to clear away the rusty, sundry,
More informationQuotation. 110 Ultrasonic Thickness Gauge / D-meter Ultrasonic Thickness Gauge Transducers Insize Make
110 Ultrasonic Thickness Gauge / D-meter Quotation Make Dipel Time Time Model B 2 TT100 Extra Probe for TT 100 Range mm 1. 5 to 99 0. 75-300 - Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm -
More informationPRODUCT EXPANSION! New N Geometry in grade IN05S UPDATED
PRODUCT EXPANSION! Bodies: 1.5xD, 3xD, 5xD and 8xD Weldon & Cylindrical Shanks 12xD bodies also available. Refer to NPA NEW-203 Tips: 6.0-25.9 mm Geometries: TPA - Steel TMA - Stainless Steel TKA - Cast
More informationUDICELL and EXACTFLO Filters. Application Guide
UDICELL and EXACTFLO Filters Application Guide UDICELL and EXACTFLO Filters Filtration Technology ASK Chemicals offers a full portfolio of metal filtration products for all metal types and applications,
More information160 UTG-2841 UTG ISU 200C ISU 250C ISU-200D -P
+ Quotation 92 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Model B 2 TT100 Range mm 1. 5 to 99 0. 75-300 Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm With Probe - 1 Probe Rs. 14500
More informationPortable Hardness Tester
A Portable Hardness Tester A Portable Hardness Tester TIME 5300 P02 A2 Portable Hardness Tester TIME 530 P03 A3 Portable Hardness Tester TIME 5302 P04 A4 Portable Hardness Tester TIME 5303 P05 A5 Portable
More informationA Leading Brand of Motorcycle Mirrors Since The Ken Sean name has been the trusted original equipment of choice by
KS019 E-MARK MIRRORS A Leading Brand of Motorcycle Mirrors Since 1950 The Ken Sean name has been the trusted original equipment of choice by Best of the best by European standards. Ken Sean E-Mark mirrors
More informationISU-250C ULTRASONIC THICKNESS GAUGE OPERATION MANUAL
MN-ISU-0C-E www.insize.com ISU-0C ULTRASONIC THICKNESS GAUGE OPERATION MANUAL Attention Technical Specification In order to obtain good measurement precision, you need to clear away the rusty, sundry,
More informationALLIANT METALS INC. PRODUCT & SERVICE CATALOG B Route 111 Hampstead NH RECEIVING HOURS: 8 a.m. to 4 p.m.
ALLIANT METALS INC. PRODUCT & SERVICE CATALOG 1-800-543-1453 134B Route 111 Hampstead NH 03841 OFFICE HOURS: 8 a.m. to 5 p.m. SHOP HOURS: 7 a.m. to 6:30 p.m RECEIVING HOURS: 8 a.m. to 4 p.m. No minimum
More informationFINISHING CATALOG. Bench & Pedestal Wheels Aluminum Oxide for General Purpose Off-hand work. 6 x 3/4 x 1 (H*)
2015 METAL FABRICATION & FINISHING CATALOG Premium Shop Rolls Backing is more flexible. High quality friable grain. Material is easily torn to length and/or shape needed. For cleaning, deburring and polishing.
More informationInch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA END MILLING
BULLDOG CUTTING TOOLS END MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools may
More information90 MILL FAMILY WITH A GROWING NUMBER OF OPTIONS!
90 MI FAMIY WITH A GROWING NUMBER OF OPTION! Multi-Purpose 09 s: Ø.500" - Ø 3.000" PCD Tip R.015 R.031 R.062 R.078 R.120 Depth of Cut:.35" Insert eries: BOCT09, BODT09, BOMT09, ZOMT09 Materials: Aluminum,
More informationDigital Coating Thickness Gauge Model No
250 Gibbs Road Islandia NY 11749 Digital Coating Thickness Gauge Model No. 15964 www.phase2plus.com Unique Products - Innovative Solutions Features: 250 Gibbs Road Islandia NY 11749 * The 15964 is capable
More informationQuotation Ultrasonic Thickness Gauge - With 10% Discount Model Rs Page No
Quotation 110 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Time Model B 2 TT100 Extra Probe for TT 100 Range mm 1. 5 to 99 0. 75-300 - Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm -
More informationPortable Hardness Tester. User's Manual
Portable Hardness Tester User's Manual Content 1. Introduction 1.1 Principle Scope 1 1.2 The Hardness Value 2 1.3 Features 2 1.4 Types 3 2. Technical Specifications 4 3. Checking Supplied Accessories 5
More informationBS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
More informationDelivering Innovative Engineered Solutions to Customers Globally. Engineered Standards 2011 Catalog
Delivering Innovative Engineered Solutions to Customers Globally D C Engineered Standards 2011 Catalog Worldwide Fastening Solutions In today s marketplace, component standardization and shorter lead times
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2012-11 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationInstruction Manual Ultrasonic Thickness gauge DC3020
Instruction Manual Ultrasonic Thickness gauge DC3020 V 7.11 CONTENTS 1.General Description... - 1-2.Technical Specifications... - 1-3. Standard Delivery... - 2-4. Overview the Display Unit... - 2-5. Keypad
More informationCoroMill Plura MILLING. When precision counts! Multi-edge version For super finishing. Spherical version For accessibility
076-079 0-11-15 15.40 Sidan 76 When precision counts! Multi-edge version For super finishing CoroGrip power chuck For precision Spherical version For accessibility 76 076-079 00-10-05 11.28 Sidan 77 Benchmarks
More informationArrakis 30 - Monochromatic Model No: ARR US
Arrakis 30 Monochromatic Model No: ARR.003.36.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding 'INT' at the
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More informationPortable Hardness Tester DHT-100
Portable Hardness Tester DHT-100 Large LCD display with back light Impact devices D DC DL C D+15 G and E are available for special applications RS 232 output Automatic conversions to: Brinell HB, Rockwell
More informationRECOMMENDED CUTTING CONDITIONS
P FH7020 MP6120 MP6130 VP30RT 850 750 685 620 Mild Steel 180HB (7001000) (580910) (515845) (450880) 180280HB 280350HB 3545HRC 550 (400700) 450 (300600) 450 (300600) 480 (320630) 350 (190500) 350 (190500)
More informationGas Pressure Regulator HON
Gas Pressure Regulator HON 0 0.0 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 0/07 Serving the Gas Industry Worldwide Contents page. General Remarks 3. Safety Instructions 3. Special Operating
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationMFC Multi-Functional Cutting Up to 96 different applications per tool
passion for precision MFC Multi-Functional Cutting Up to 96 different applications per tool New cutting data calculator ToolExpert MFC Multi-functionality is the key factor for simplifying the entire manufacturing
More informationLED WELL LIGHTS SL-20-MD LEDM7/-11/-15/-20 SERIES
SPECIFICATIONS CONSTRUCTION: BODY: Fiberglass reinforced bronze composite with molded brass inserts for screws LENS HOLDER & GRATE: Fiberglass reinforced bronze composite, cast aluminum or cast brass AIMING
More informationPL-0111-BFV Butterfly Valves
PL-0111-BFV Butterfly Valves Prices Effective January 10, 2011 Wafer and Lug Style, Cast Iron and PVC Up to 200 WOG One and Two Piece Valve Stem Nickel Plated Ductile Iron, Aluminum, Bronze and 316 Stainless
More informationAPPLICATION ICONS MATERIAL ICONS MACHINE ICONS. Steel. 2-in-1: Steel/Stainless Steel. Stainless Steel: INOX. Cast Materials.
ABRASIVE PRODUCTS Icons & Information APPLICATION ICONS MATERIAL ICONS MACHINE ICONS 0-5 o grinding, brushing, drilling & mortar raking Steel 2-in-1: Steel/Stainless Steel Angle Angle Stainless Steel:
More information3M Roloc Discs and Disc Sanders. Simply the. Right Angle Solution. Distributed by:
3M Roloc Discs and Disc Sanders Simply the Right Angle Solution Distributed by: Choose the Right Right Angle System Having the right tool system for the job is a powerful feeling. You ll feel that power
More informationPadlocks & Deadlocks. PL5000, DL2200/DL3200, DL3000 & DL4100 Series
PL5000, DL2200/DL3200, DL3000 & DL4100 Padlocks PL5000 Rekeyable Fixed Core (RFC) and Interchangeable Core (IC) Models RFC IC Model RFC IC Features PL5000R PL5100R PL5200R PL5070 PL5170 PL5270 Case Extruded
More informationFile E Project 03ME March 01, 2004 REPORT COMPONENT - NON-OPTICAL ISOLATORS. Analog Devices Inc Wilmington, MA
WWW.UL.COM 1.877.ULHELPS / (1.877.854.3577) File E214100 Project 03ME16137 March 01, 2004 REPORT on COMPONENT - NON-OPTICAL ISOLATORS Analog Devices Inc Wilmington, MA Copyright 2004 Underwriters Laboratories
More informationJCT Series. Coolant-Through Holders for Small Parts Machining. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JC Series Coolant-hrough Holders for Small Parts Machining Excellent Chip Control and Long ool Life with High Pressure Coolant Capable of Pressure up to 2,900 psi Large Holder Lineup for urning, External
More information1898 NCR Catalogue Section on Manifolding Autographic Registers Originally priced from $10 to $40. No. 225 Manifolding Autographic Register.
1898 NCR Catalogue Section on Manifolding Autographic Registers Originally priced from $10 to $40 Ed- These simple receipt writing autographics are still fairly common today. They are only very collectable
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationDesign and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 15, 2009
Design and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 5, 2009 Abstract Presented below is a cell mount for two lenses that are 6 in diameter and made of
More informationThickness Gauge Transducers & Accessories - Price List Date: 01/01/18
Thickness Gauge Transducers & Accessories - Price List Date: 01/01/18 Dual Transducer Reference Chart Frequency & Disks Note: The frequency and crystal diameter are stamped and sorted according to color,
More informationFile E Project 12SC February 9, 2013 REPORT. Component - Protectors, Low-voltage Solid-state Overcurrent
File E211395 Project 12SC04547 February 9, 2013 REPORT On Component - Protectors, Low-voltage Solid-state Overcurrent Copyright 2013 UL LLC MAXIM INTEGRATED PRODUCTS AUSTIN, TX 78729 UL LLC authorizes
More informationRelease Notes: MaterialUniverse Data Module for GRANTA MI
Release Notes: MaterialUniverse Data Module for GRANTA MI December 2014 Release The Granta MaterialUniverse data module provides engineering, economic, and environmental property profiles designed for
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationAutomotive Adhesives and Sealants
3 Automotive Adhesives and Sealants Introducing the 3M Automotive Adhesives and Sealants Product Line... 27 High Turnover Products Targeted for the Professional Technician and DIY Customer Multiple Product
More informationAsia
Administered by PRI July 21, 2011 Mr. Mike Hushek Quality Assurance Manager Dear Mike Hushek The report of the Nadcap accreditation audit of your facility on November 09 - November 12, 2010 has been approved
More informationCONTROL KNOBS, MACHINED ALUMINUM
CONTROL KNOBS, MACHINED ALMINM FEATRES Anodized natural or black gloss finish. Anti-static plastic insert. (on many models) Positive retention #6-32 set screws. Fits 1/8" dia. & 1/4" dia. shafts. Functionally
More informationglass optical fibers
ü For high ambient temperatures (models with chrome-plated brass and silicone sleeves) ü Executions for extreme environmental conditions ü Small dimensions ü Long sensing ranges ü Suitable for the detection
More information200 C ~ 1850 C (392 F ~ 3362 F) INFRARED THERMOMETER 200 C ~ 2200 C (392 F ~ 3992 F) OPERATION MANUAL
INFRARED THERMOMETER 200 C~1850 C(392 F~3362 F) 200 C~2200 C(392 F~3992 F) INFRARED THERMOMETER 200 C ~ 2200 C (392 F ~ 3992 F) INFRARED THERMOMETER 200 C ~ 1850 C (392 F ~ 3362 F) OPERATION MANUAL K user's
More informationStainless Steel & Heat-Resistant Alloys
Stainless Steel & Heat-Resistant Alloys Carbide Turning Solutions Specialized Turning Solutions for Stainless Steel and HRSA Applications MEGACOAT NANO MEGACOAT MEGACOAT MEGACOAT MEGACOAT PVD Coated Carbide
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS
Reamers - and - achine (orse Taper & Chucking) - Bridge - Taper in - orse Taper ocket - Taper ipe - Adjustable REAER AVAILABLE I ULTILE LAGUAGE L00 VE L00 VL L00 VFR L00 VDE L00 VIT L00 VE L00 VE Engineers
More informationThe new ABUS 83 Series
The new ABUS 83 Series Brass padlocks dominate both the Australian and New Zealand market places. For well over 50 years, the locksmiths commercial padlock of choice has been a 45mm brass bodied padlock.
More informationFiles for the workshop Machinist s files, DIN series
Files for the workshop Machinist s files, DIN series PFERD produces files for the workshop with the highest quality standards. They achieve a long service life and high stock removal rates. Three application-oriented
More informationSINGLE BARREL 1/2 9/16 3/4 7/ /2 1/2 5/8 11/ /8 1 1 /4 1 9 / /4 SINGLE BARREL NEMA TANG DRILLING CTN /8 1 3 /16 CTN 71055
PAGE MECHANICAL LUGS ALUMINUM SAL SERIES AL OR CU DIMENSIONS (IN) MAX. MIN. L W H BOLT B SINGLE BARREL 00 00 00 0 00 00 00 00 00 00 000 *A- *A- *A-/0 A-/0 A-0 A-00 A-0 A-00 A-00 A-00 A-000 # STR /0 STR
More informationYE-CT13 EUROPE SPIRAL FLUTE / SPIRAL POINT. New Edition
SIRA FUTE GUN OINT SIRA FUTE / SIRA OINT YE-CT13 EUROE New Eition SIRA FUTE / SIRA OINT HEA OFFICE 68, Cheongcheon-ong, Bupyeong-Gu, Incheon 3-030, KOREA HONE :+82--526-0909, FAX:+82--526-4373 Http://www.yg1.r
More information708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
More informationNew 83 Series Best Rekeyable Ever
New 83 Series Best Rekeyable Ever New Nano-Plating for extreme Patented Easy Change shackle feature: shackle can be changed within Brass, Aluminium and Steel bodies available Patented -Bar allows padlock
More informationSECTION A. Tempered Glass Free Standing Swing Gate Post Assemblies.
Page 1 of 5 SECTION 05 7310 CRL-BLUMCRAFT FREE STANDING GLASS SWING GATE POST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Free Standing Swing Gate Post Assemblies. 1.2 RELATED SECTIONS
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationCord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections.
-Pin Amp Plastic 0883 Kit (consists of) 080 Receptacle 03 Pins (Qty ) 088 Kit (consists of) 080 Connector 03 Sockets (Qty ) Note: Strain relief clamp 03 needs to be ordered separately with cord-mounted
More informationSECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
More information2016 INNOVATIONS CATALOG
INNOVATIONS CATALOG 2016 One versatile grooving and cut-off system Coolant channel on rake and pocket First system on the market with active coolant distribution, providing coolant directly to the minor
More informationJCT Series. Coolant-Through Holders. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JCT Series Coolant-Through Holders Excellent Chip Control and Long Tool Life with High Pressure Coolant Large Holder Lineup for Turning, External Grooving, Cut-off and Threading Easy Connection with High
More informationB34 SR & SN Medium Duty Commercial&Industrial Regulator
Product Bulletin KG IMAC Systems, Inc. 90 Main Street, PO Box 0 Tullytown, PA 9007 Tel. -800-9-GAS () 9-00 Fax:() 9-98 www.imacsystems.com B SR & SN Medium Duty Benefits Economical Space-saving design
More informationCombined Hardness Tester NOVOTEST T-UD3
Combined Hardness Tester NOVOTEST T-UD3 Operating Manual 2018 CONTENT 1 DESCRIPTION AND OPERATION OF THE DEVICE AND ITS COMPONENTS... 5 1.1 The purpose of the device... 5 1.2 Technical characteristics
More informationUltrasonic Thickness Gauge. Operation Manual
Ultrasonic Thickness Gauge Operation Manual SA40 Contents 1. Overview 4 2. Keypad 4 3. LCD display 4 4. Calibration 5 5. Change velocity 5 6. Measuring velocity 5 7. Data memory and read 6 8. Optional
More information3D Printing Technologies and Materials. Klaus Gargitter
3D Printing Technologies and Materials Klaus Gargitter Agenda 3D Printing Technologies and Materials 3D printing technologies SLA /DLP CLIP/CDLP Material Jetting SLS FDM Near Future 3D Printing technologies
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationSAA-3 Series FC D-Shape ADAPTOR
DOCUMENT NUMBER S04-H017-01E FC D-Shape ADAPTOR TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477 FC
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
More informationMAG. ECO FLO imag Series NSF FEATURES
Flow Meters & Controls MAG ECO FLO imag Series M o vi n g P s N o rt w U NSF o n Easy setup Minimal straight pipe Mounted or remote rate & total 4-2mA output available Tamper-evident seal NSF-61 approved
More informationRavenna TM. Fixture Options: Ordered Separately from Fixture See page 2. Mounting Options: Ordered Separately from Fixture See pages 3-5
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners,
More information