STAR TOOL SUPPLY / GRAND TOOL SUPPLY
|
|
|
- Ralf Simon
- 6 years ago
- Views:
Transcription
1 FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute Flute Overal Spiral Size Length Length Flute / / / / / / / / / / / / / / / / / / / / 0 00 / / / 0 00 / / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / / 0 00 / 0 00 / 0 00 / 0 00 / 0 00 / 0 00 / 0 00 / 0 00 / / 0 00 / / / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / / 0 0 / / / 0 00 / / / 0 0 / / / / / / 0 0 / / / 0 00 / / / 0 0 / / / 0 00 / / 0 0 / / 0 00 / / 0 0 / / 0 00 / / 0 0 / / / / 0 0 / / 0 00 / / / 0 0 / / 0 00 / / / 0 STRAIGHT FLUTE (Continued) Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA SPIRAL FLUTE Straight Flute Spiral Flute Flute Overall Size Length Length / / / 0 00 / / 00 / / 0 00 / / 0 / / 0 00 / / / / 0 00 / / 0 00 / / / 0 00 / / / 0 00 / / / / / / / / 00 LETTER SIZES SERIES : STRAIGHT SHANK / STRAIGHT FLUTE Decimal Flute Overall Size Equivalent Length Length Number A.0 / 000 B.0 / 000 C 0 / 000 D.0 / 000 E.00 / 000 F.0 / 000 G. / 000 H.0 / 000 I.0 / 000 J.0 / 00 K. / 00 L.00 / 00 M.0 / 00 N.00 / 00 O. / 00 P.0 / 00 Q.0 / 00 R.0 / 00 S.0 / 00 T.0 / 000 U.0 / 00 V.0 / 00 W.0 / 00 X.0 / 00 Y.00 / 00 Z. / 00 CUTTING TOOLS REAMERS
2 COBALT STEEL STRAIGHT SHANK / STRAIGHT FLUTE SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA WIRE GAUGE SIZES SERIES : STRAIGHT SHANK / STRAIGHT FLUTE CUTTING TOOLS REAMERS Flute Overall Size Length Length Number / / 0 / / 0 / / 0 / / / 0 / / / 0 / 0 / 0 / / / 0 / / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 00 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 / 0 / 0 / 0 / 0 / 0 / / 0 / / 0 / / 0 / / 0 / / / 0 / / / 00 / / / 0 / / / 0 / / 0 / / 0 / / 0 / / 0 / / 0 DOWEL PIN SIZES STRAIGHT SHANK / STRAIGHT SERIES : Flute Overall Size Lgth Lgth.0 / / 0. / /. / /. / /.0 / 0. /. /.0 / 0.0 / 0. /. /.0 / Decimal Flute Overall Size Equivalent Lgth Lgth.0 / 00. / 00. / / 00.0 / / 00.0 / 00.0 / 00.0 / 00. / 0. / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0 0. / / 00.0 / / / / / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / / / / / 0.0 / 0.00 / 0.00 / 0.00 / 0.0 / 0.0 / 0.00 / 0.00 / / / 0.0 / / 0.0 / / 0.00 / / 0.00 / / 0.0 / / 0.00 / / 0.00 / / 0.0 / / / / 00
3 OVERSIZE AND UNDERSIZE STRAIGHT SHANK / STRAIGHT FLUTE SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA METRIC SIZES SERIES 0: STRAIGHT FLUTE/ STRAIGHT SHANK Flute Overall Size Lgth Lgth. / / 00. / / 0. / / 0. / / 00. / / 0. / / 0. / / 0. / 00.0 / 00. / 0. / 0. / 0. / 0. / 00. / 0. / 00. / 0. / 00. / / 00. / 00. / 00. / / 00. / / 0. / 00. / 00. / / / / 0 REAMER SETS SERIES : MEDA SERIES : L&I Other sets available. See our website or inquire. Supplied in metal HUOT case except where otherwise indicated. Size Flute Overall Shank Diameter Lgth Lgth Diameter (mm) (mm) (mm) (mm) Pieces MEDA LAVALLE & IDE Set Description per Set CUTTING TOOLS REAMERS Chucking Straight Shank / Straight Flute Wire Gauge # thru #0 0 0 Fractional / thru / by ths 00 0 Letter A thru Z 0 0 Over and Undersize. thru.0 by ths * Dowel Pin. thru. by ths 000 0* mm x.mm 0 0** Chucking Straight Shank / Spiral Flute Fractional / thru / by ths 00 0 * Supplied in vinyl pouch. **Supplied with wood block. For Chucking Reamer Indexes... see page Dispensers... see page
4 STRAIGHT SHANK SERIES : STRAIGHT FLUTE SPIRAL FLUTE, RIGHT HAND CUT COBALT STEEL STRAIGHT FLUTE Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA CUTTING TOOLS REAMERS Sizes included: Fractional, Wire Gage, Letter, Metric, Over/Under, Dowel Pin Dia. #0 # # / # # # # # # # m/m #0 # # # # / # #. m/m # / # # #0 # # / # m/m # # # # # / # #0. m/m # # # # / # # # # Dec. Equiv Flute Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Number Flutes Overall Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Shank Dia Straight Flute Spiral Flute STRAIGHT FLUTE SPIRAL FLUTE COBALT (Continued)
5 STRAIGHT SHANK (Continued) SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Sizes included: Fractional, Wire Gage, Letter, Metric, Over/Under, Dowel Pin Dia. m/m #.0.0. /.0 #0 #. m/m # / # # # # # / # m/m # #0 # # / # #. m/m # # #... /. # # # # m/m # # / # # # #. m/m / # # A / m/m B C D.0.0. E/.. m/m F G Dec. Equiv Flute Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Number Flutes Overall Lgth / / / / / / / / / / / / / / / / / / / / / / / / / / Shank Dia Straight Flute Spiral Flute (RH) Cobalt (Continued) CUTTING TOOLS REAMERS
6 STRAIGHT SHANK (Continued) SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA CUTTING TOOLS REAMERS Sizes included: Fractional, Wire Gage, Letter, Metric, Over/Under, Dowel Pin Straight Flute Spiral Flute (RH) Cobalt Dia. / H I m/m J K / L M. m/m / N...0 /. m/m O P / Q. m/m R / S m/m T / U.0.0.mm. /.0 V W / m/m X Y / Z. m/m / m/m...0 /.. m/m / / m/m /. m/m.0.0. /.0 m/m /. m/m m/m / Dec. Equiv Flute Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Number Flutes Overall Length Shank Dia (Continued)
7 STRAIGHT SHANK (Continued) SERIES : H.S.S. STRAIGHT FLUTE H.S.S. SPIRAL FLUTE (RH) Sizes included: Fractional, Wire Gage, Letter, Metric, Over/Under, Dowel Pin Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA STRAIGHT FLUTE SPIRAL FLUTE Diameter. m/m m/m /. m/m / m/m. m/m / m/m /. m/m m/m /. m/m m/m /. m/m / 0 m/m 0. m/m / m/m /. m/m m/m /. m/m m/m /. m/m / m/m. m/m / m/m.0000.mm / / / / / / / / / / / / / / / / / / / / / Dec. Equiv Flute Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Number Flutes Overall Length / / / / / / / / / / / / / / / / / / Shank Dia CUTTING TOOLS REAMERS
8 CUTTING TOOLS REAMERS STAR TOOL SUPPLY / GRAND TOOL SUPPLY DECIMAL REAMERS STRAIGHT SHANK / STRAIGHT FLUTE Additional sizes up to.000 available. See our website or inquire Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA SERIES : O R D E R N O. When ordering, use and the digit decimal size for P R I C E S Decimal Size SERIES : Decimal Size O R D E R N O. When ordering, use and the digit decimal size for P R I C E S Additional Quantity Discounts (per size): Pcs % 0 Pcs % over 0 Pcs 0%
9 TAPER SHANK SERIES : STRAIGHT FLUTE; MEDA SUPERIOR IMPORT SERIES : SPIRAL FLUTE (RH); MEDA SUPERIOR IMPORT SERIES : STRAIGHT AND SPIRAL (RH) FLUTES LAVALLEE & IDE Morse Flute Overall Straight Flute Straight Flute L & I Size Taper Lgth Lgth / / 0 00 / / 0 0 / / 00 0 / / 0 0 / / 0 0 / / 0 0 / / 0 0 / / 00 0 / 0 0 / 0 0 / 0 / 0 / / 00 / / 0 / / 0 / / 0 / / / 0 / / / 00 / / / 0 / / / 0 / / 0 0 / / 0 / / 00 / / 0 / / 0 / / / 0 / / / 0 / / 0 / / 0 / / 00 / / 0 / / 0 0 / / 0 / / / 0 / / / / / / / / / / / / 00 / Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Spiral Flute TAPER SHANK METRIC SIZES STRAIGHT FLUTE SERIES 0: Size Flute Overall Diameter Lgth Lgth Shank (mm) (mm) (mm) Taper Spiral Flute L & I Size Flute Overall Diameter Lgth Lgth Shank (mm) (mm) (mm) Taper CUTTING TOOLS REAMERS
10 / STRAIGHT FLUTE EXPANSION SERIES 0: STRAIGHT SHANK SERIES : TAPER SHANK Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA CUTTING TOOLS REAMERS Straight Shank Taper Shank M.T. Shank Flute Size Series 0 Lgth OAL. / / / 0 / / / 0 / / / 0 / / / 0 / / / 00 / / / 0 / / 0 00 / / 0 00 / / 0 00 / / / 0 00 / 0 00 / / 0 00 / / 0 00 / / / / 0 00 / / 0 00 / / 0 00 / / / 0 00 / / / / / / 0 00 / / / 0 00 / / 0 00 / / 0 00 / / / / 0 00 / / 0 00 NOTE: The expansion feature of these reamers provides a means of adjustment. When worn undersize they may be expanded and reground to the original size. CARBIDE TIPPED SERIES : STRAIGHT SHANK / STRAIGHT FlUTE General purpose reaming of aluminum, cast iron, steels, plastics and other abrasive materials. Flute Overall Size Lgth Lgth / / / 00 / / 00 / / 00 / / 00 / / 000 / / 00 / / 00 / / 00 / / 00 / / 000 / 00 / 00 / 00 / 00 / / 000 / / 00 / / 00 / / / 00 / / / 00 / / 00 / / 000 / / 00 / / / 00 / / 00 / / 000 / / 00 / / 00 / / / 000 M.T. Straight Shank Taper Shank Shank Flute Size Series 0 Lgth OAL. / / / 0 00 / / / 0 00 / / / / / 0 00 / / 0 00 / / 0 00 / / 0 00 / / / / / / 0 00 / 0 00 / 0 00 / / / 0 00 / / / 0 / / 0 / / 0 / / / 0 / / / 0 / / 0 / / 0 / / / / 00 / / / 0 00 / / / 0 / / / 0 / 00 / 0 / 0 / 0 / / 0 / / / / 0 / CARBIDE TIPPED EXPANSION CHUCKING REAMERS SERIES : STRAIGHT SHANK / STRAIGHT FLUTE Flute Overall Size Lgth Lgth / 00 / 00 / 00 / 0 / / 00 / / 000 / / 00 / / / 00 / / / 00 / / 00 / / 0 / / 000 / / 00 / / 00 / / / 000 / 00
11 SOLID CARBIDE FRACTIONAL SIZES SERIES : STRAIGHT SHANK / STRAIGHT FLUTE Flute Overall Size Length Length / / / 0 / / / 0 / / / 0 / / / 0 / / 0 / / / 0 / / / 0 / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / 0 / / / / / / / / / / / / / / / / / / 0 / / SOLID CARBIDE METRIC SIZES SERIES : STRAIGHT SHANK / STRAIGHT FLUTE Flute Overall Size Length Length.0mm / / 0.mm / / 0.0mm / / 0.mm / / 0.0mm / /.mm / /.0mm / /.mm / /.0mm.mm.0mm.mm / /.0mm / /.mm / /.0mm / / 0.mm / /.0mm / /.mm / / 0.0mm / /.mm / /.0mm /.mm /.0mm /.mm / Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA SOLID CARBIDE WIRE GAUGE SIZES SERIES : STRAIGHT SHANK / STRAIGHT FLUTE Decimal Flute Overall Size Equivalent Length Length / / / / 000. / / 00. / / 00.0 / / 00.0 / / 00.0 / / 00.0 / / 00. / / 00. / / 00. / / 00. / / / / / / 00.0 / / 00.0 / / 00.0 / / 00. / / 00. / / 00. / / 00. / / 00. / / / / / / 00. / / 00. / / 00. / / 00.0 / / 00. / / 00.0 / / 00. / / 00.0 / / / / 00.0 / / / / 00.0 / / 00.0 / / / / / / / / / / 00.0 / / 00.0 / / / / / / 00.0 / / / / / / 00.0 / / / / / / / / / / / / / / / / / / 00 CUTTING TOOLS REAMERS
12 SOLID CARBIDE LETTER SIZES SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Diameter Flute Size Decimal Lgth OAL Diameter Flute Size Decimal Lgth OAL Diameter Flute Size Decimal Lgth OAL CUTTING TOOLS REAMERS A 0.0 B 0.0 C 0.0 D 0.0 E 0.00 F 0.0 / / G 0. / / H 0.0 / / I 0.0 / / SOLID CARBIDE RANGE: SERIES : Diameter Flute Decimal Lgth OAL / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / / / 0.00 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / / / 0.00 / / 0.0 / / 0.0 / / 0.00 / / 0.00 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / J 0.0 / / K 0. / / L 0.00 / / M 0.0 / / N 0.00 / / O 0. / / P 0.0 / / Q 0.0 / / R 0.0 / / Straight Shank Straight Flute C Micrograin Carbide % Cobalt flutes on sizes up to. diameter flutes on sizes. diameter and above Cutting flutes are precision ground Close tolerances and consitent tool accuracy. Diameter Flute Decimal Lgth OAL 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0.00 / / 0.0 / / 0.00 / / 0.00 / / 0.0 / / / / 0.00 / / 0.0 / 0.0 / 0.00 / 0.0 / 0.00 / 0.0 / 0.00 / 0.0 / 0.0 / 0.00 / 0.0 / 0.00 / 0.0 / 0.0 / / 0.00 / 0.0 / 0.0 / 0.00 / 0.0 / 0.00 / 0.00 / 0.0 / 0.00 / 0.0 / 0.0 / 0.00 / / 0.0 / / 0.0 / / 0.00 / / S 0.0 / / T 0.0 / / U 0.0 / / V 0.0 / / W 0.0 / / X 0.0 / / Y 0.00 / / Z 0. / / Manufactured to the highest precision standards. Diameter Flute Decimal Lgth OAL 0.00 / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0.0 / / 0. / / 0.0 / / (Continued)
13 SOLID CARBIDE RANGE: SERIES : (Continued) Diameter Flute Decimal Lgth OAL 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0.00 / / 0.0 / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / Diameter Flute Decimal Lgth OAL 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.00 / / 0.0 / / 0. / / Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Manufactured to the highest precision standards. Diameter Flute Decimal Lgth OAL / / 0 0. / / 0. / / 0.0 / / / / / / / / / / 0 0. / / 0.0 / / 0 (Continued) CUTTING TOOLS REAMERS
14 CUTTING TOOLS REAMERS 0 STAR TOOL SUPPLY / GRAND TOOL SUPPLY SOLID CARBIDE RANGE: SERIES : (Continued) Diameter Flute Decimal Lgth OAL 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / / / 0.0 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.0 / / 0. / / 0. / / 0. / / 0.0 / / 0. / / 0. / / 0. / / 0. / / 0. / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / Diameter Flute Decimal Lgth OAL 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0. / / 0. / / 0.0 / / 0. / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.00 / / 0. / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / 0.0 / / / / 0.0 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.00 / / 0.0 / / 0. / / 0.0 / / 0. / / 0.0 / / 0. / / 0. / 0. / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0. / 0.0 / 0.0 / Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Manufactured to the highest precision standards. Diameter Flute Decimal Lgth OAL 0.0 / 0.0 / 0. / 0.0 / 0. / 0.0 / 0.0 / 0. / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0.0 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.00 / 0. / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0.0 / 0. / 0.00 / 0.0 / 0.0 / 0.00 / 0.00 / 0.00 / 0.00 /
15 TAPER SHANK BRIDGE REAMERS FLUTES SERIES : STRAIGHT FLUTE SERIES : SPIRAL FLUTE (LH) Bridge Reamers available. See our website or inquire. Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Appr. Straight Flute Spiral Flute M.T. Dia. Flute Size Shk. at Pt. Lgth. OAL / / / / / / / / 0 00 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 00 / / / 00 / / / 00 / / / 00 / / / 00 / / / 00 / / / 00 / / 0000 CUTTING TOOLS REAMERS / STRAIGHT SHANK MORSE TAPER HAND REAMERS FINISHING SERIES : MEDA SUPERIOR IMPORT SERIES : LAVALLEE & IDE Diameter MEDA Roughing MEDA Finishing L & I Finishing Morse Small Large Flute Overall Taper End End Shank Lgth Lgth 0.0. / / / / / / / / / / / / / / / / / / TAPER SHANK MORSE TAPER MACHINE REAMERS SERIES : MEDA SUPERIOR IMPORT SERIES : LAVALLEE & IDE Diameter MEDA Roughing MEDA Finishing Morse Small Large Flute Overall Taper End End Lgth Lgth 0.0. / / / / / / / / / / / / / L & I Finishing
16 CUTTING TOOLS REAMERS STAR TOOL SUPPLY / GRAND TOOL SUPPLY HAND REAMERS SERIES : STRAIGHT FLUTE MEDA SUPERIOR IMPORT SERIES : SPIRAL (LH) FLUTE MEDA SUPERIOR IMPORT SERIES : STRAIGHT FLUTE & SPIRAL (LH) FLUTE STAR USA Flute Overall Size Lgth Lgth / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Straight Flute MEDA STAR USA Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Spiral Flute MEDA STAR USA HAND REAMER SETS available. See our website or inquire. Many other sizes available. See our website or inquire. CARBON STEEL REPAIRMAN S TAPER REAMER SERIES : * Removes burrs from small holes. * Enlarges and countersinks holes in soft metals Range // 0 // 0 TAP WRENCHES suitable for holding Hand Reamers. See pages ;.
17 HAND REAMERS METRIC SIZES SERIES 0: STRAIGHT AND SPIRAL (LH) FLUTES Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA ADJUSTABLE BLADE REAMERS SERIES : Size Flute Overall Straight Flute Helical Flute Dia. Lgth Lgth (mm) (mm) (mm) Overall Size Range Lgth /A / / / 00 /A / / 00 /A / / / 00 /A / / / 00 /A / / / 00 /A / / 00 /A / / / 00 A / / / 00 B / / / 000 C / / / 000 D / / / 000 E / / 000 F / / / 000 G / / 000 H / / 000 I / / 000 J / / 00 K / / 0 L / / 00 M / / 0 N / / 0 O / / 0 00 See L&I next page. ADJUSTABLE BLADE REAMER SETS SERIES : Model Range ABRS /A/A 000 ABRS /A/A 000 ABRS AH 000 ABRS AK 000 CUTTING TOOLS REAMERS / TAPER SHANK JOBBERS LENGTH REAMERS SERIES : STRAIGHT FLUTE available. See our website or inquire. M.T. Flute Overall Size Shank Lgth Lgth / / 0000 / / 00 / / / 000 / / / 00 / / / 00 / / / 00 / / / 00 / / / 000 / / 00 / / 00 / / / 00 / / / 00 / / / 000 / / / 00 / / 00 M.T. Flute Overall Size Shank Lgth Lgth / / 00 / / / 00 / / / 00 / / / 00 / / 000 / / 00 / / / 00 / / / 00 / / 00 / / / 000 / / / 00 / / / 00 / / 00 / / / 00
18 ADJUSTABLE HAND REAMERS SERIES : Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Blades are adjusted by loosening one nut and tightening the other. Each reamer expands to the next size. CUTTING TOOLS REAMERS Range of Blade Overall Size Adjust. Length Length /A / / / / /A / / / / /A / / / / /A / / / / /A / / / / /A / / / /A / / / / A / / / / 0 B / / / / C / / / D / / / ALIGNING REAMERS SPIRAL FLUTE SERIES : / Straight Shank with Equal Flats to Fit / Chucks Used to align existing holes prior to rivet or bolt installation. The point is tapered to allow entry into overlapping holes. They are also useful in portable reaming. Range of Blade Overall Size Adjust. Length Length E / / / F / / / / G / / H / / / I / / / J / / / K / / / 00 L / / / 0 M / / 0 N / / / 0 O / / / 0 0 CAR REAMERS SERIES : TAPER SHANK SPIRAL FLUTE Car reamers are primarily used for enlarging, aligning and deburring holes. They are often used in building and repairing railroad cars. Their short flute and overall lengths permit use in cramped quarters. Flute Overall Shank Size Lenght Length Diameter / / / /* / / / / / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / 00 / / 0 / / / 0 * Indicates No Flats on Shank Approx. Morse Point of Flute Overall Taper Size Size Flutes Length Length / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / / / / / ALIGNING REAMERS HEX SHANK STYLE SERIES : LH Spiral Flute Flute Overall Hex Shank Size Lenght Length Diameter / / / 0 / / 0 / / 0 / / 0 For portable pneumatic tools, the short length permits use in limitedaccess areas. The shank diameter for each reamer matches socket size for the bolt which will be driven through the newly reamed hole.
19 HAND EXPANSION REAMERS SERIES : STRAIGHT FLUTE MEDA SUPERIOR IMPORT SERIES : SPIRAL (LH) FLUTE MEDA SUPERIOR IMPORT SERIES : STRAIGHT FLUTE & SPIRAL (LH) FLUTE LAVALLEE & IDE Flute Overall Size Length* Length / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / *May vary slightly. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / MEDA Straight Flute Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Spiral Flute L & I MEDA L & I Many more sizes up to available. See our website or inquire. NOTE: Expansion hand reamers are primarily designed for work where it is necessary to enlarge reamed holes by a few thousandths. Maximum Expansion Limit: / /.00 / /.0 /.0 CUTTING TOOLS REAMERS METRIC SIZES TAPER PIN REAMERS High Speed Steel SERIES : Size Shank Dia. Small End Large End mm mm mm mm mm mm mm mm mm mm mm 0mm mm.mm.mm.mm.mm.mm.mm.mm.mm.mm.mm.mm.mm.mm Diameter.mm.0mm.mm.mm.00mm.0mm.0mm.00mm.00mm 0.0mm.0mm.0mm Flute Length mm mm mm mm mm mm mm mm mm 0mm 0mm 0mm Overall Length mm 0mm mm 0mm mm mm mm mm mm 0mm 0mm mm
20 TAPER PIN REAMERS TAPER: / PER FOOT SERIES : STRAIGHT FLUTE SERIES : SPIRAL FLUTE (LH) SERIES 0: HELICAL FLUTE Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA CUTTING TOOLS REAMERS Diameter Straight Flute Spiral Flute Helical Flute Small Large Flute Overall Size End End Length Length /0.0.0 / / / / / /0.0.0 / / /0.0. / / /0.. / / /0.. / / / / / / / / / / / / / / / / / / / / / / / / / / / / TAPER PIN REAMER SETS Each set is supplied in a plastic pouch with reamer sizes clearly marked. SERIES : STRAIGHT FLUTE SERIES : SPIRAL FLUTE (LH) SERIES 0: HELICAL FLUTE Range /0 to 0 0 to 0 to /0 to of Pieces Straight Flute Spiral Flute Helical Flute TAPER PIN REAMERS TAPER: / PER FOOT SERIES : Specifications same as above. Size /0 /0 /0 /0 /0 /0 0 Straight Flute Spiral Flute Helical Flute TAPER PIN REAMER SETS SERIES : Range #0# #0# #0# /0#0 /0#0 /0#0 #0# #0# #0# Flute STR LHS HELICAL STR LHS HELICAL STR LHS HELICAL of Reamers Type Case Wood Wood Wood Wood Wood Wood Wood Wood Wood
21 SHELL REAMERS SERIES : STRAIGHT FLUTE SERIES : SPIRAL FLUTE (LH) Many more sizes, as well as Carbide Tipped Shell Reemers available. See our website or inquire. SHELL REAMER ARBORS SERIES 0 : STRAIGHT SHANK SERIES : TAPER SHANK SelfEjecting Nut Type Shown Federal Tool Premium Import Made of alloy forged steel for long, durable service life. Hardened to RC 0 and ground to ensure maximum accuracy. Taper T.I.R. < FEDERAL Arbors are provided with ejecting nut, collar and key, MEDA Arbors are not. Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA Overall Hole Fitting Straight Flute Spiral Flute Size Lgth Diameter Arbor / / / 0 0 / / / 0 0 / / / 0 0 / / / / / 0 0 / / / 0 0 / / / 0 0 / / / 0 0 / / / / / 0 0 / / 0 0 / / 0 0 / / 0 0 / / / / / / / / / / / / / / / 0 0 / / / 0 0 / / / / / / / / / 0 0 / / / / / / / / / / / / / 0 0 / / / / / / / / / / 0 0 / / / 0 0 / / / 0 0 / / / / / / / 0 0 / / / / / / / / / / 0 0 / / / / / Range Dia. of M.T. of Straight Shank Taper Shank Straight Taper FEDERAL MEDA FEDERAL MEDA Size From To Shank Shank CUTTING TOOLS REAMERS / / / 000 / / / 000 / / / 000 / / / 000 / / 000 / / / 000 / / 00 / 00 / /
22 TAPER PIPE REAMERS SERIES : MEDA SUPERIOR IMPORT SERIES : SPIRAL FLUTE (LH) LAVALLEE & IDE Tel: 0 / Fax: 0 0 Huyler St / So. Hackensack, NJ 00 USA MEDA LAVALLE & IDE Small Large Flute Straight Flute Spiral Flute (LH) Straight Flute Size End End Lgth OAL. Spiral Flute (LH) CUTTING TOOLS REAMERS Spiral Flute TAPER PIPE REAMER SETS Each set is supplied in a plastic pouch with reamer sizes clearly marked. Designed for reaming holes to be tapped with American standard taper pipe taps (NPT). / Taper per foot. Generally used by hand. Available with straight or spiral flutes and square shank. Made from High Speed Steel. /.. / /.. / / /.0. / / /.0.0 / / /.. / / /.. / / / / /.. / /.. / / / / /.. / / / Range /, /, /, / and of Pieces Straight Flute Spiral Flute 00 / FLUTE, STRAIGHT SHANK SOLID PILOT COUNTERBORES SERIES : For Cap Screws Machine Screw, Fractional, and Metric Sizes / FLUTE, STRAIGHT SHANK SOLID PILOT COUNTERBORES SERIES : For Fillister Head Screws Machine Screw Sizes and Fractional Sizes Pilot Cutting Shank Overall Size Dia. Dia. Dia. Length.. / / 00 / / / 00 / / / 0 / / / / 0 / / / / 00 / / / / 0 / / / 0 / / / / / 0 / / / / / 00 / / / 0 / / / 0 / / 0 Pilot Cutter Cutter Shank Size Dia. Dia. Length Dia. M M M M M M M M* 0. MT 0 M*. MT 0 M0*. MT 00 * Taper Shank See next page for sets Machine Screw Sizes Fractional Sizes Screw Pilot Cutting Shank Overall Size Size Size Dia. Length 0.0. / / / / / / / / / / / / / / 00 / / / / 000 / / / / / 00 / / / / / 00 / / / / / 00 Contains piece each. Supplied in Wood Block Piece Set:,,,, Piece Set: /, /, /, / 00 0
Tel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.. / 00..0 (USA & CANADA) / Email sales@msdiscounttool.com FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute
P R I C E G U I D E & C A T A L O www.trianglereamer.com G N O. 1 0 0 9 www.trianglereamer.com 103 Gonyeau Road Milton, Vermont 05468 E-mail: reamers@trianglemetalfab.com Phone: 1-802-893-1581 Fax: 1-802-893-1814
p.10 Two Tone Jobbers HSS 118 Point p.10 Bright Finish Jobbers HSS 118 Point
p.10 Two Tone Jobbers HSS 118 Point p.10 Bright Finish Jobbers HSS 118 Point BLACK Oxide p.11 Black Oxide Jobbers HSS 118 Point p.11 Black Oxide Wire Gauge HSS 118 Point p.12 Black Oxide Jobbers HSS 135
Displays, Cabinets & Indexes
Annular Cutter Sets... 134 Counter Displays Annular Cutter... 133 Reamers Type 50-UB & Type 51-UB.. 134 Silver & Deming.... 133 Stock Master Dispensers & Displays Type 925 300pcs. Fractional... 132 Display
CUTTING TOOLS FOR LEGACY AIRCRAFT
CUTTING TOOLS FOR LEGACY AIRCRAFT TABLE OF CONTENTS PAGE CATEGORY 4. Threaded Shank Drills - Fractional, A-G 5. Threaded Shank Drills - #1-40 6. Drill Piloting Info 7. Jobber Drills - Fractional, A-Z 8.
PREMIUM QUALITY CUTTING TOOLS FOR PRECISION MACHINING
PREMIUM QUALITY FOR PRECISION MACHINING ENDMILLS DRILLS REAMERS TAPS BURRS SPECIALTY TOOLS AND MORE... A BlackHawk Industrial Corporate Brand Sold Exclusively by BlackHawk Industrial Pioneer Tool is a
Displays, Cabinets & Indexes
Displays, Cabinets & Indexes Counter Displays Annular Cutter................. 134 Reamers Type 50-AG & Type 51-AG.. 133 Silver & Deming................ 133 Stock Master Dispensers & Displays Type 925 300pc.
Drilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
Variable Helix (Steel) - Standard Ballnose. Variable Helix (Steel) - Standard Length SEE WEBSITE FOR PRICE DISCOUNTS
6 Variable Flute (Steel) - 4FL - Standard Length < 7 Variable Flute (Steel) - 4FL - Ballnose Standard Length < NEW 8 Variable Flute (Steel) - 4FL - Stub, Long & Long-reach < NEW 9 Variable Flute (Steel)
1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:
1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal
8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
Professional Tools for Electrical Engineers
Turbo-Bore Spade Bits L43-0160 L43-0164 L43-0168 L43-0172 L43-0176 L43-0180 L43-0184 L43-0188 L43-0192 L43-0196 L43-0200 L43-0204 L43-0208 L43-0212 L43-0216 L43-0220 L43-0224 L43-0228 L43-0232 11 mm 13
Intentionally left blank to reduce file size.
Intentionally left blank to reduce file size. To Our Valued Customers, Welcome to the 2005 edition of our catalog! In this edition, you will find many new tools in such areas as high performance carbide
Metal-Max - Standard Ballnose. Metal-Max - Standard Length. Now available as a coolant thru cutter! AlTiN. AlTiN. MTMXB - Std.
2007 Catalog INDEX 4 Metal-Max - 4FL - Standard Length 5 Metal-Max - 4FL - Ballnose Standard Length 6 Metal-Max - 4FL - Stub, Long & Long-reach length 7 Metal Max - Square Corner - Speeds Chart 8 Metal
100% LAB TESTED. FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time.
100% LAB TESTED FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time. EASY ORDERING Order toll free, by fax, or email, either by part number or
High Performance Carbide Tools. Standard Carbide* Tools
2007 Catalog High Performance Carbide Tools 6 Metal-Max - 4FL - Standard Length < 7 Metal-Max - 4FL - Ballnose Standard Length < 8 Metal-Max - 4FL - Stub, Long & Long-reach length < 9 Metal Max - Square
dia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
Burs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
100% LAB TESTED. FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time.
100% LAB TESTED FAST DELIVERY 4000 items and 99% of all orders are shipped the same day if received before 3 P.M. Eastern Time. EASY ORDERING Order toll free, by fax, or email, either by part number or
POWER TOOL ACCESSORIES
Professional SDS Plus Hammer Drills grade high performance SDS plus hammer drill bit range using the latest precision machining and carbide tip technology for increased penetration rates and more efficient
Price Each. Bulk Qty.
s subject to change without notice DeWALT SDS+ Masonry Bits Item Number Description Each Bulk Each for Bulk DW5348 BULL POINT 10" SDS+ $ 8.95 DW5350 CHISEL 3/4 X 10 SDS+ $ 8.95 DW5401B25 SDS BIT 5/32 X
COMPLETE SATISFACTION EASY ORDERING FAST DELIVERY OVER 4000 ITEMS. Berardo Paradiso President - ITM Corp. Dear ITM Customer:
Dear ITM Customer: We are pleased to present you with our 2017 catalog. Here you will find tested and proven drilling and cutting products made by experts in the design, innovation, and manufacturing of
High Speed Steel Drills and Taps - Alpha
High Speed Steel Drills and Taps - Alpha CODE Price Each Description 6 Pack Code Price TL-9CD4-516 $ 10 34 39p 5 Centre Drill HSS #4 5/16 Diameter TL6-9CD4-516 $ 46 /6 TL-9CD5-716 $ 15 56 70p 9 Centre
BULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA END MILLING
BULLDOG CUTTING TOOLS END MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools may
WHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL)
WHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL) Remember 1977? Jimmy Carter took office. The Apple II hit stores. And The Jewell Group started providing quality cutting tool solutions to
CORDLESS SYSTEMS. Hilti. Outperform. Outlast.
CORDLESS SYSTEMS. Hilti. Outperform. Outlast. Cordless Systems with Ll-Ion SFC 14-A Page 067 Accessories and Consumables Page 068 SFH 22-A Page 069 SID 14-A Page 070 Accessories Page 071 SIW 14-A Page
Edition 7.1 HOME OF THE REVOLUTIONARY NEW FOR Cutting Tool Innovation Speed up Metalworking UNPRICED
Cutting Tool Innovation Speed up Metalworking Edition 7.1 UNPRICED HOME OF THE REVOUTIONARY NEW FOR 2018 Cutting Tools Power Tool Accessories CarbideMax TCT Broach Cutters HMT Magnetic Drills Fabrication
RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
Inch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
091R supplement to Catalog 09 SOLID CARBIDE REAMERS
091R supplement to Catalog 09 W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W LI LI LI LI LI I I I I I LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI LI su SOLID CARBIDE
604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
AQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, D Aqua EX Oil Hole D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 0D, 0D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute D, D Aqua Micro Metric,
WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
Technical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
ACUTABOV WOOD 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT PAGE
ACUTABOV WOOD PAGE 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT 52 Alpha_PG_09.pdf 52 23/12/08 11:01:44 AM E PAGE 54 TURBOMAX AUGER BITS 55 TURBO-BORE SPADE BITS 56 SHIPPER AUGERS
SPINDLE TOOLING AND QUICKCHANGE TOOLPOSTS
SPIN TOOING N QUIHNG TOOPOSTS IN 8 IN 8 Manufactured with hrome Manganese steel arburized with depth of case 0,7 mm Hardened and ground Surface hardness R 8± MORS TPR Form kcesoria Form kcesoria MT a b
7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
MODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
DRILL BITS. Section F Page 49. Phone Fax Prices per each exc. GST. & Extr3me Series suit R3 Ramset.
DRILL BITS Page 49 Code per exc. GST /08/004 Code T Multi-Fit Drill s 6 x 00 6 x 450 8 x 00 8 x 450 0 x 00 0 x 450 x 450 4 x 450 x 450 6 x 450 0mm x M mm x M 4mm x M 6mm x M 8mm x M 0mm x M 0 0 0 0 0 0
ELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
Workholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
INSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES RESOURCE VALUE. (888)
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES The raw material that is used to manufacture your tool is just as important as the design of the tool itself. By using inferior materials, the tool life
102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
Secoroc Rock Drilling Tools. Product catalogue Tophammer equipment
Secoroc Rock Drilling Tools Product catalogue Tophammer equipment Contents Page Integral drill rods 4 Plug hole rods 5 Tapered drill steel equipment 6 Drifting 11 Bench and production drilling 27 Shank
FASTener DRIVES & screwdriving
FASTener DRIVES & screwdriving 17 IMPACT PERFORMANCE SERIES FOR MAXIMUM DURABILITY AND LONG LIFE Based on the increasing popularity and frequency of use of impact drivers on the jobsite, IRWIN offers a
Toolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
KD-NL. Specialized Machine. Quick Change Stub Tapper. Finger collet assembly P Tap Adapter P. 458
KD-NL Quick Change Stub Tapper Designed for use on KD spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KD-NL in a condition where the tension feature always works
Best of Accessories. April June Bosch Customer Service Content to be adapted locally. Dealer contact details
Best of Accessories April June 2014 Bosch Customer Service 095 81 Promotions This number connects you to the Bosch Customer Service Team. It is there to answer your questions about technical matters and
P AD RETAINERS. AVAILABLE IN: Reversed Style, Locking Style, and Counterbored Style. Increase safety and strength to your pad retention.
P AD RETAINERS Flats hold with wrench AVAILABLE IN: Reversed Style, Locking Style, and Counterbored Style. Increase safety and strength to your pad retention. Eliminate stripper bolts Flats hold with Locking
V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
Drill Chucks. Phone: Fax: Famous World Wide! Established in 1925
www.fausa.com At the beginning of the 20th century, Virgile Amyot manufactured precision tools used by Swiss watchmakers. In 1925 in response to industry demands, Mr. Amyot and his sons expanded their
IAR/AR. Ideal for Three-Dimensional Rough Milling and Direct Milling MODULAR STYLE SHANK STYLE FEATURES
IAR/AR Ideal for Three-Dimensional Rough Milling and Direct Milling MODULAR STYLE SHANK STYLE FEATURES -3 times greater performance over conventional indexable mills Round insert for high-feed machining
DN100 (4") - DN500 (20") Hot Tappings
DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.
Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
Series 200 Double-Spiral Tube Brushes...Powered Use
Series 200 Double-Spiral Tube Brushes...Powered Use Series 200 Brushes are beefed up to withstand the rigors of being driven by power tools, drills and drill presses. Handles are double-strand heavy-gauge
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS
Reamers - and - achine (orse Taper & Chucking) - Bridge - Taper in - orse Taper ocket - Taper ipe - Adjustable REAER AVAILABLE I ULTILE LAGUAGE L00 VE L00 VL L00 VFR L00 VDE L00 VIT L00 VE L00 VE Engineers
[2] Precision Tip 4. Manufactured with heavy-duty, high-grade steel
![[2] Precision Tip 4. Manufactured with heavy-duty, high-grade steel](/thumbs/80/81152288.jpg "[2] Precision Tip 4. Manufactured with heavy-duty, high-grade steel")
Irwin impact 1870983 double-ended bits [4] 1. DoubleLok Technology Ensures both ends of bit lock securely in impact drivers and quick-change chucks, enabling use of two tips from one bit for added convenience
Taps - DIN High Performance Tap Range - M, MF - UNC, UNF, UN - G (BSPF) - NPT
Taps Taps - DIN High Performance Tap Range -, F - UNC, UNF, UN - G (BSPF) - NPT Taps Finder - For Synchro Tapping Page Synchro Gun Synchro Gun, IK Synchro Spiral Flute, R50 Synchro Spiral Flute, R50, IK
Split Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
SPECIALTY ABRASIVE PRODUCTS
2 0 0 8 SPECIALTY ABRASIVE PRODUCTS CONDITION OF SALES CONDITION OF SALES ABRASIVE A COMPANY Product availability: Please refer to our price schedule for the most up to date availability information as
Navigator II INstallatIoN MaNUal For static and PaN/tIlt configurations
Navigator II Installation MANUAL For Static and Pan/Tilt Configurations Document Number: 432-0001-00-12, rev 100 FLIR Systems, Inc., 2008. All rights reserved worldwide. No parts of this manual, in whole
THE TOOLKITS LISTED BELOW ARE USED BY UNAVCO TO INSTALL PERMANENT POLAR GPS STATIONS
THE TOOLKITS LISTED BELOW ARE USED BY UNAVCO TO INSTALL PERMANENT POLAR GPS STATIONS HAND TOOLS Tool bucket Home Depot Fabric tool caddy Husky 53378 Field notebook and pencil 2 Wind turbine shorting plugs
Composite Cutter. Interrupter. Made In. Made In
Made In Composite Cutter u Carbide Teeth u Carbide Pilot u Ejector Spring u 2 Drilling Depth u 3-Flat Shank Hard Plastic Stucco Clay Pipe Hardy Board Dry Lath & Plaster Wood with Nails Aluminum Siding
KTLP. Specialized Machine. Quick Change Stub Tapper. Ordering Example KTLP Tap Adapter P. 458 F1 + F2=13. (Sold separately)
KTLP Quick Change Stub Tapper Applications Designed for use on special-purpose machine, transfer machine etc. Spindle Feed : All kinds of feed styles. For spindle feeds other than pitch feed, use a tapping
MACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
NIKKEN TOUGH-CUT SKILL REAMER NIKKEN TOUGH-CUT SKILL REAMER
NIKKEN TOUGH-CUT SKILL REAMER Features Photo shows Tough-cut skill Reamer AZMA NITRIDING This is nitriding by a This is nitriding by a sputtering operation, sputtering operation, alongwith with aa glow
For Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
A-dec 586 Ceiling Monitor Mount
Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
COUNTERTOP SAW PARTS Rev Mar2019 IMAGE DESCRIPTION BOLD Part No.
SOLID STATE DIODE LASER ½ Diameter - 635nm, 5 mw, 90 Degree Beam Angle E1009204 SOLID STATE DIODE LASER ¾ Diameter - 10 mw - 3/16 wide beam E1009207 1.5 HP Porter Cable Router Motor 120V [ENDCAP MODIFIED
DN40 (1 1/2") - DN200 (8") Hot Tappings
DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.
A-dec 584 Monitor Mount on a Central Cabinet
Installation Guide A-dec 584 Monitor Mount on a Central Cabinet Before You Begin This procedure applies to the A-dec Inspire TM 592 Central Console and the standard and tall Preference cabinet central
NOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocop ied for each trainee. Performance tests are designed to mea sure competency in the tasks taught
COLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
Blackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Revision date: 05.10.18 Maintain controlled airflow without
Burrs of HSS. 66 Technical Information. 67 A summary of available shapes. 69 Types of cut and their application. 70 Burrs of HSS
66 Technical Information 67 A suary of available shapes 69 Types of cut and their application 70 Burrs of HSS Product line marking The product lines are illustrated by star symbols at the top of the table;
Rider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA
AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
MICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
Spiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
S S 0.13 U1/4 ~ U5/ KH 16A-NL008 (U3/8) S S KH 19A-NL110
KH-A-NL Quick Change Stub Tapper Applications Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension
GbX Backplane and Daughtercard Tooling. *GbX is a Trademark of Teradyne Inc.
GbX BACKPLANE and DAUGHTERCARD INSTALLATION TOOLING For GbX Connector Series 75220 and 75360 (4 Pair and 5 Pair Daughtercard assemblies) 75292 (Daughtercard Power) 75235 and 75237 (4 Pair and 5 Pair Backplane
Large Object Calipers. ORC Forensics
Large Object Calipers ORC Forensics 42 X-Kaliper The Large Object Caliper (XLOC) These are the most economical, easy-to-use and multifunctional calipers anywhere. Parts are symmetrical so you can have
AlphaGateway SMG-01PE Quick Start Guide
AlphaGateway SMG-01PE Quick Start Guide 9 Power-Passing Tap 2 AlphaGateway SMG 5 1 8 6 3 4 7 PoE Devices Security Camera Wi-Fi Radio 1. 1 RF Connector Test Port A -20dB test port allowing measurement of
4 IMPACT SOCKETS, BITS
IMPACT SOCKETS, BITS IMPACT SOCKETS, ADAPTOS AND SETS PAGE 58 BITS AND ACCESSOY TOOS PAGE 66 IMPACT DIVE AND SET PAGE 7 IMPACT Sockets, Machine actuated IMPACT Sockets, Machine actuated. STAHWIE IMPACT
LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1
Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
Airetool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
IAR/AR. Ideal for Three-Dimensional Rough Milling and Direct Milling SHANK STYLE FACE MILL STYLE MODULAR STYLE FEATURES
IAR/AR Ideal for Three-Dimensional Rough Milling and Direct Milling SHANK STYLE FACE MILL STYLE MODULAR STYLE FEATURES -3 times greater performance over conventional indexable mills Round insert for high-feed
Cable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
Blackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Maintain controlled airflow without sacrificing blackout environments.