Product Description. FX22, FX62, and FX70 Supervisory Controllers
|
|
- Kevin Haynes
- 6 years ago
- Views:
Transcription
1 Date: November 12, 2010 Announcing: Facility Explorer Supervisory Controller Release 3.0 From: Facility Explorer Product Management Released To: System Services Americas (SSA) Asia Pacific System Services Europe (SSE) JCJPN Authorized Building Controls Specialists (ABCS) Systems Technology Distribution Product Description Johnson Controls, Inc. is pleased to announce new additions and enhancements to Facility Explorer Supervisory Controllers: FX22, FX62, and FX70 Supervisory Controllers FX Supervisory Controller Accessories FX Supervisory Controller Software Release 3.0 FX40 Trade-up Program FX22, FX62, and FX70 Supervisory Controllers The FX22, FX62, and FX70 are new additions to the Facility Explorer Supervisory Controller family. The FX22 and FX62 are wall mounted supervisory class controllers that contain 16 onboard Input/Output (I/O) points and an integral power supply. The FX22 and FX62 provide the same supervisory and control functionality as the FX20 and FX60 except that the FX22 and FX62 are housed in packages designed to reduce installation time and cost. The FX22 and FX62 include conduit knockouts, wiring labels, and power wire segregation with all wiring connections concealed. Connectivity is extended with the optional onboard General Packet Radio Services (GPRS) modem. You can have Web browser and FX Workbench access even when there is no Ethernet LAN connection. The onboard I/O points allow you to implement control applications without the need to run a separate field device trunk. The FX22 and FX62 are ideal for retrofits, new construction, small buildings, remote sites, and energy management applications. Figure 1: FX22 and FX62 Supervisory Controllers Code No. LIT
2 The FX70 is a DIN rail mounted supervisory controller similar to the FX20 and FX60 except slightly larger in size and with more computing resources. The FX70 is similar to a high performance, large capacity version of the FX60. The FX70 comes standard with 1 GB and 1 GB of flash memory. In addition, the FX70 has up to four times more RAM, eight times more flash, and a faster processor which enables more applications, larger databases, more histories, and more graphics. Figure 2: FX70 Supervisory Controller The new controllers support all of the same option cards and optional drivers as the FX20 and FX60, with one exception. The FX70 does not support the Wireless TEC option card at this time. Support for the Wireless TEC option card will be added to the FX70 in a future release. FX Supervisory Controller Accessories Also new is the RS-485 remote Input/Output module (LP-FXRIO16-0), which expands the Supervisory Controller s direct I/O capabilities. The FXRIO contains eight universal inputs, four relay outputs (Form A contacts), and four analog 0-10 VDC outputs. The FXRIO16 can be mounted up to 4,000 ft (1,219 m) from its host FX Supervisory Controller, using RS-485 networking. New GRPS modem option cards are now available to add cellular network remote access to the FX Supervisory Controllers. The FX22 and FX62 include models (FX2213 and FX6213) with the GPRS modem factory-installed. Alternatively, you can field mount this capability to FX20, FX60, and FX70 with the LP-FXGPRS-0 or LP-FXGPRSW-0 option cards. The GRPS modem option is a great capability to have for installation and commissioning during the early stages of a project when a hardwired Ethernet LAN has yet to be installed. 2
3 Technical Specifications Table 1: FX Supervisory Controllers Enclosure/ Mounting Dimension FX20 FX60 FX70 FX22 FX62 Plastic/DIN Rail 6.25 x 4 x in. ( x x mm) 8.5 x 6 x in. (216 x 152 x 67 mm) Plastic/Wall x 7.5 x 2.25 in. (321 x 191 x 57 mm) Power Supply DIN Rail Power modules Integral 24 VAC/DC Battery Backup Processor 5-minute internal PowerPC 405EP at 250 MHz PowerPC 440EP at 524 MHz RAM Memory 128 MB RAM 128 MB RAM (upgradeable to 256 MB) Heap 48 MB 48 MB (upgradeable to 96 MB) Flash Memory 5-minute internal, optional external PowerPC 440EPx at 667 MHz PowerPC 405EP at 250 MHz PowerPC 440 at 524 MHz 1 GB RAM 128 MB SDRAM 256 MB SDRAM 384 MB 48 MB 96 MB 64 MB Flash 128 MB Flash 1 GB Flash 64 MB Flash 128 MB Flash Environment Operating Temperature: 0 to 50 C (32 to 122 F) Storage Temperature: 0 to 60 C (32 to 140 F) Relative Humidity: 5 to 95%, noncondensing Communication Ports Onboard 2 Ethernet 10/100 Mbps 1 RS RS option slots 2 Ethernet 1 Gbps 1 RS-485 (Isolated) 1 RS option slots Optional Two options slots (any 2 of the following, except where noted): Dual port RS-485 LON FT/TP-10 Modem (maximum of one and disables onboard RS-232 port of FX20/FX60) RS-232 Wireless TEC (Maximum of one and disables onboard RS-232 port of FX20/FX60)* GPRS modem (maximum of one) Sedona Framework 2 Ethernet 10/100 Mbps 1 RS RS option slot Integral GPRS modem (FX2213, FX6213 models only) One option slot (any one of the following): Dual port RS-485 LON FT/TP-10 Modem (disables onboard RS-232) RS-232 Wireless TEC (disables onboard RS-232) GPRS modem (not available on models with integral GPRS modem) Sedona Framework Continued on the next page... *The LP-FX7011N-0 will not support the LP-FXWTC-0 (wireless TEC) option card at Release 3.0, but the option card will be supported at a future release. 3
4 (Cont.) FX20 FX60 FX70 FX22 FX62 Network Drivers Embedded N2, Niagara, obix, Wireless TEC Optional LONWORKS, BACnet MS/TP, BACnet IP Client, BACnet IP Server, ModBus RTU Client, ModBus RTU Server, ModBus TCP Client, ModBus TCP Server, SNMP, SMS Direct I/O Onboard None 8 Universal Inputs (0-100 K ohm, 0-10 VDC, 0-20 ma with external resistor, or 10 K ohm type 3 thermistor) 4 Relay Outputs (Form A, 24 VAC at 0.5 A) 4 Analog Outputs (0-10 VDC) Local (NDIO Up to 66 total I/O (via optional NDIO modules) None Remote I/O Up to 64 I/O via 4 Remote I/O Modules (FXRIO16) Up to 256 I/O via 16 Remote I/O Modules (FXRIO16) Up to 48 I/O via 3 Remote I/O Modules (FXRIO16) Up to 240 I/O via 15 Remote I/O Modules (FXRIO16) FX Supervisory Controller Software Release 3.0 Facility Explorer Supervisory Controller Software Release 3.0 uses Niagara AX 3.5, which contains several new features and enhancements. Some of the new features are: Export Tagging: allows certain items of an FX Supervisory Controller station to be tagged for export to an FX Server station. All the export tags of a FX Supervisory Controller station can be automatically mapped into the FX Server when the supervisory controller joins the FX Server. Tagging is available for Px views (graphics), control points, histories, schedules, files, and components. Tagging allows you to automate the time consuming process of discovering data in a FX Supervisory Controller and then mapping into an FX Server. History Grouping: allows logical groupings of histories based on dynamic property values. The history database can now have multiple navigation trees that are customized for your specific project. On-Call Service: allows the routing of alarms to multiple people based on a prioritized contact list, including delays and escalation. Standard scheduling can be used to manage who is on call and when they are on call. and SMS Alarm Acknowledgement: provides a method for users to acknowledge alarms by simply replying to the or SMS alarm notification. 4
5 Documentation Table 2: Related FX Series Supervisory Controllers Documentation Document Title FX20/FX60 Supervisory Controllers Product Bulletin FX20/FX60 Supervisory Controllers Catalog Page FX Server Product Bulletin FX Server Catalog Page Facility Explorer Supervisory Products Networking Technical Bulletin TEC Series Wireless Thermostat Controller System for FX20/FX40/FX60 Controllers Technical Bulletin TEC Series Wireless Thermostat Controller for FX20/FX60s with a Wireless TEC Option Card Technical Bulletin LIT Number LIT LIT LIT LIT LIT LIT LIT FX20/FX60 Wireless TEC Option Card Installation Instructions FX Supervisory Products Upgrade Instructions FX20, FX40, and FX60 Protocol Implementation Conformance Statement FX Workbench User's Guide (Online Help) LIT LIT LIT FX20/FX60 LON Card Installation Instructions FX20/FX60 Modem Card Installation Instructions FX20/FX60 RS 232 Card Installation Instructions FX20/FX60 RS 485 Card Installation Instructions
6 Ordering Information Table 3: Supervisory Controllers Product Order Codes and Confidential Price List Product Code Number Description List Price (USD) LP-FX2211T-0 FX22 with 128 MB RAM/64 MB Flash, two 10/100 Mb Ethernet ports, one RS-485 serial port, one RS-232 serial port, sixteen I/O, one communication card option slot, Web User Interface, Embedded Workbench, Niagara driver obix driver, N2 driver. $3, LP-FX2213T-0 LP-FX6211T-0 LP-FX6213T-0 LP-FX7011N-0* LP-FXRIO16-0 FX22 with GPRS modem; includes 128 MB RAM/64 MB Flash, two 10/100 Mb Ethernet ports, one RS-485 serial port, one RS-232 serial port, sixteen I/O, one communication card option slot, Web User Interface, Embedded Workbench, Niagara driver, obix driver, N2 driver. FX62 with 256 MB RAM/128 MB Flash, two 10/100 Mb Ethernet ports, one RS-485 serial port, one RS-232 serial port, sixteen IO, one communication card option slot, Web User Interface, Embedded Workbench, Niagara driver, obix driver, N2 driver. FX62 with GPRS modem; includes 258 MB RAM/128 MB Flash, two 10/100 Mb Ethernet ports, one RS-485 serial port, one RS-232 serial port, sixteen I/O, one communication card option slot, Web User Interface, Embedded Workbench, Niagara driver, obix driver, N2 driver. FX70 with 1 GB Flash memory, one RS-232, one RS-485 port, two Gigabit Ethernet ports, two USB ports, two communication card option slots, internal battery backup. Standard features include Web User Interface, Embedded Workbench, obix driver, Niagara driver. Sixteen Channel Remote I/O module for FX20, FX22, FX60, FX62, and FX70. Includes eight Universal Inputs, four Form A Relay Outputs, four 0-10 VDC Analog Output. $4, $6, $6, $8, $ LP-FXGPRS-0 GPRS Modem option card for FX20, FX60, and FX70 $ LP-FXGPRSW-0 LP-FXGPRSE-0 LP-FXGPRSS-0 LP-FXGPRSU-0 GPRS Modem option card for FX20, FX60, and FX70 with Wyless SIM card Included is a 6.56 ft (2 m) SMA type coax extension cable and steel bracket for wall or panel mounting of the GPRS Modem antenna. GPRS Modem SIM card replacement provisioned by Wyless GPRS Modem retrofit kit for FX22 and FX62; uses one option card slot. This is for FX22s andfx62s purchased without the internal GPRS modem. Includes a Wyless SIM and a remote mount antenna with mounting bracket. $ $80.00 $40.00 $ Continued on next page... *The LP-FX7011N-0 will not support the LP-FXWTC-0 (wireless TEC) option card at Release 3.0, but the option card will be supported at a future release. 6
7 Product Code Number (Cont.) LP-FXSED-0 LP-FXSEDEXT-0 Description Sedona Framework option card with both wireless 6LoWPAN and wired RS-485 port, based on the Jennic JN5139 wireless microcontroller. Includes stub antenna ft (2 m) RP-SMA type coax extension cable and mounting bracket. List Price (USD) $ $ LP-KITFX7BAT-0 FX70 Replacement Backup battery assembly $ LP-KITFX2HW-0 Hardware bag for FX22, FX62 containing removable screw terminal connector blocks (two 7-position, three 6- position, one 2-position). $75.00 LP-KITFXRIO-0 Hardware bag for FXRIO16 $49.00 LP-KITFX2DB-0 LP-KITFX7HW-0 LP-KITSEDAT-0 FX22 and FX62 Adapter, RJ-45 to DB-9 null modem, for onboard RS-232 serial port to connect to DTE device. Hardware Bag for FX70, containing screw terminal connector plugs (two 6-position, one 2-position, earth grounding wire). Replacement adjustable-angle 2.4GHz RP-SMA coaxmounted stub antenna for Sedona option card $63.00 $ $52.00 LP-KITSED3T-0 3-terminal wiring plug for RS-485 for Sedona option card $10.00 Tool Requirements FX Tools Supervisor Pro Release 3.0 is required to program, download, and commission the new FX22, FX62, and FX70 controllers and to use the new Remote I/O Module and GPRS Module accessories. 7
8 Table 4: Supervisory Controllers Product Order Codes and Confidential Price List Product Code Number Description List Price (USD) LP-FXTSPDEM-0 Single user, engineering/demo version of FX Tools Supervisor Pro software, delivered on CD-ROM. Includes all software modules and drivers needed to engineer and commission stations for FX Supervisory Controllers and FX Servers. You must also purchase the office support and renewal fee to activate this software. License expires every October 31 and must be renewed yearly to continue operation. $ LP-FXTSPDEM-6 LP-FXTSPE-0 LP-FXTSPE-6 LP-FXWS-0 LP-FXWSLTD-0 LP-FXWS-6 Engineering/Demo version of FX Tools Supervisor Pro software delivered on CD-ROM: For upgrading only (provides the most recent version of FX Tools Supervisor Pro software for existing, licensed users). End user version of FX Tools Supervisor Pro software, delivered on CD-ROM. Includes a non-expiring license. Can only be used to engineer or commission FX Supervisory Controller and FX Server stations via an online connection. End user version FX Tools Supervisor Pro software delivered on CD-ROM. For upgrading only (provides the most recent version of FX Tools Supervisor Pro software for existing, licensed users). FX Server software on CD-ROM. Allows integration of an unrestricted number of FX Supervisory Controllers. Includes FX Workbench and a 1-year software maintenance agreement. FX Server software on CD-ROM. Allows integration of up to three FX Supervisory Controllers. Includes FX Workbench and a 1-year software maintenance agreement. FX Server software on CD-ROM. For upgrading only (provides the most recent version of FX Server for existing, licensed users). $33.74 $2, $33.74 $7, $4, $33.74 LP-FXALMPTL-0 FX Alarm Portal client $ LP-FX40UPG-0 LP-FXSWUPG-0 License enabling one-time, new release software upgrade for one FX Supervisory Controller (FX20, FX22, FX40, FX60, FX62, and FX70). License enabling one-time, new release software upgrade for one FX Server or one End User Version of FX Tools Supervisor Pro $ $ To upgrade an FX Supervisory Controller to the Release 3.0 software, the FX Supervisory Controller requires there to be a minimum of 10 MB file system free space. The file system free space size can be determined by looking at the station s Platform Service Container or from the Platform s Platform Administration node of the Nav tree. If there is not 10 MB (10,000 KB) of free space, user intervention is needed to remove files, histories, and/or alarms to reduce file space usage until there is free space of at least 10 MB. Most FX40 controllers may not have enough files space memory for this upgrade. 8
9 Facility Explorer FX40 Trade-up Program Effective Through March 31, 2011 For a limited time only, when you purchase select FX Supervisory Controllers from Johnson Controls, you will receive up to a $ credit for each FX40 you trade in. Program Details The new FX Supervisory Controller software (release 3.0) features Niagara AX 3.5, which uses more memory than previous versions. As a result, most FX40 controllers will not operate properly with the new 3.0 release. Johnson Controls wants to provide an upgrade path for all FX40 users, so we are offering the FX40 upgrade program through March 31, Rebate Information You must meet the following criteria to receive the rebate: You must order the replacement controllers with the new T code numbers as shown in Table 5. You must return the existing FX40 controller to Erlanger within 90 days of shipment of the replacement controllers. Ordering the Replacement Controller Contact Johnson Controls Product Sales at to place an order and request an RMA. See Table 5 for product information. Table 5: Product Code Numbers Purchase Product Code Number LP-FX2211T-0T (same as LPFX2211T-0) LP-FX6211T-0T (same as LP-FX6211T-0) Return Product Code Number* LP-FX4020A-0 $ LP-FX4021A-0 $ LP-FX4022A-0 $ LP-FX4023A-0 $ LP-FX4020A-0 $ LP-FX4021A-0 $ LP-FX4022A-0 $ LP-FX4023A-0 $ Rebate Amount (US Dollars) *When returning the old hardware, include a copy of the RMA and the packing slip from the new LP-FXx211T-0T shipment. Upon receipt of the returned FX40 controller, appropriate rebate dollars will be credited. Failure to return the existing FX40 controller(s) within 90 days of shipment of the replacement controller(s) or lack of required information will delay or may void the rebate. Release Schedule Table 6: Release Schedule for the FX22, FX62, FX70, FX Supervisory Controller Accessories, and Release 3.0 Software Item Date Orderable Date November 12, 2010 Shipping Date (except FX70) December 15, 2010 Shipping Date (FX70) January 3, 2011 Sales Documentation on QuickLit November 12, 2010 Technical Documentation on QuickLit November 12,
10 Sincerely, Mike Piotrowski Product Manager Facility Explorer Supervisory Controllers Product Development 10
Product Description. Date: November 3, 2011 Announcing: From: Released To:
Date: November 3, 2011 Announcing: From: Released To: Facility Explorer Supervisory Controller Updates and New Products Facility Explorer Product Management Authorized Building Controls Specialists (ABCS)
More informationFX Supervisory Controllers
Product Bulletin FX Supervisory Controllers Issue Date November 19, 2012 FX Supervisory Controllers FX Supervisory Controllers are Web-based supervisory-class controllers in the Facility Explorer product
More informationFX Supervisory Controllers
Product Bulletin FX Supervisory Controllers Issue Date March 9, 2015 FX Supervisory Controllers FX Supervisory Controllers are web-based supervisory-class controllers in the Facility Explorer product family.
More informationBuy American Facility Explorer Products Facility Explorer Product Management Authorized Building Controls Specialists (ABCS)
Date: January 26, 2012 Announcing: From: Released To: Buy American Facility Explorer Products Facility Explorer Product Management Authorized Building Controls Specialists (ABCS) Product Johnson Controls,
More informationSupervisory Controllers
FACILITY EXPLORER SUPERVISORY CONTROLLERS Supervisory Controllers FX20, FX60 The FX20, FX60 and FX70 are building automation supervisory class controllers in the Facility Explorer product family. They
More informationTALON Network Manager- 2 & 6 Express
Technical Specification Sheet October 30, 2010 TALON Network Manager- 2 & 6 Express Description The TALON Network Manager-2 & 6 Express (TNM-2 XPR and TNM-6 XPR) is an embedded controller/server platform
More informationEC-BOS-8 Multi-protocol Web Building Controller
Datasheet EC-BOS-8 Multi-protocol Web Building Controller Overview Features & Benefits The EC-BOS-8 is a compact, embedded controller and server platform for connecting multiple and diverse devices and
More informationEC-BOS-8 Multi-protocol Web Building Controller
Datasheet Multi-protocol Web Building Controller Overview Features & Benefits The is a compact, embedded controller and server platform for connecting multiple and diverse devices and sub-systems. With
More informationFX40 Supervisory Controller
Product Bulletin FX40 Issue Date March 1, 2007 FX40 Supervisory Controller The FX40 brings a new generation of Web based technology into the Facility Explorer product family. The FX40 manages a network
More informationcontroller data sheet JACE 8000 PRODUCT DEFINITION HARDWARE SPECIFICATIONS
data sheet JACE 8000 controller PRODUCT DEFINITION The JACE 8000 is a compact, embedded IoT (Internet of Things) controller and server platform for connecting multiple and diverse devices and sub-systems.
More informationNIEx9. Metasys. BAS network automation Supervisory controllers. Network Integration Engine
Virtual Branch ecatalogue click here Metasys Network Integration Engine Network Integration Engines (s) for 3 rd party integrations enable Internet Protocol (IP) connectivity and Web-based access to Metasys
More informationNAE. Metasys. BAS network automation Supervisory controllers. Network Automation Engine
Virtual Branch ecatalogue click here Metasys Network Automation Engine Network Automation Engines (s) enable Internet Protocol (IP) connectivity and web-based access to Metasys Building Management Systems
More informationClarity 3 GCE-8000 EMBEDDED IOT CONTROLLER PRODUCT DATA SHEET
Clarity 3 PRODUCT DATA SHEET Overview The is a compact, embedded Internet of Things (IoT) controller and server platform for connecting multiple and diverse devices and sub-systems. With Internet connectivity
More informationOverview. Applications. Features
PRODUCT DATA SHEET Overview The JENE-PC8000 is a compact, embedded Internet of Things (IoT) controller and server platform for connecting multiple and diverse devices and sub-systems. With Internet connectivity
More informationFX06 Field Controller
Code No. LIT-1900406 Issued October 19, 2012 Facility Explorer FX06 Field Controller The FX06 is a high performance field controller designed specifically for commercial Heating, Ventilating, Air Conditioning,
More informationEC-Net 4 and EC-BOS-8 Frequently Asked Questions
EC-Net 4 and EC-BOS-8 Frequently Asked Questions EC-Net 4 Features Q: Is the newer visualization/web feature essentially the same, but just based on HTML5? A: Common end users views will now be available
More informationNetwork Control Engine Catalog Page
MS-NCE25xx-x Johnson Controls www.johnsoncontrols.com LIT-1900455 2018-12-17 Release 9.0.7 Introduction The Metasys Network Control Engine (NCE) Series controllers provide a cost-effective solution designed
More informationHAWK 8000 Controller GENERAL. Product Data. Fig. 1. HAWK 8000
Controller Product Data Fig. 1. GENERAL The is a compact, embedded IoT (Internet of Things) controller and server platform for connecting multiple and diverse devices and sub systems. With Internet connectivity
More informationFX80 Supervisory Controller Catalog Page Code No. LIT Issued July 2018
Code No. LIT-1901010 Issued July 2018 Refer to the QuickLIT Web site for the most up-to-date version of this document. The FX80 Supervisory Controller is a web-based supervisory-class controller in the
More informationcontroller data sheet JACE 8000 PRODUCT DEFINITION HARDWARE SPECIFICATIONS
data sheet JACE 8000 controller PRODUCT DEFINITION The JACE 8000 is a compact, embedded IoT (Internet of Things) controller and server platform for connecting multiple and diverse devices and sub-systems.
More informationOnboard Inputs and Outputs. Remote User Interface. Integral LCD User Interface
Product Bulletin: FX06 Field Controller Issue Date: March 2006 FX06 Field Controller The FX06 is a compact field controller in the Facility Explorer range of products. The controller is designed specifically
More informationJ-201 Resource Capacity Guidelines and Sample Application Analysis
J-201 Resource Capacity Guide Introduction J-201 Resource Capacity Guidelines This document has been prepared to help you understand the capacity and horsepower of the JACE-201E and JACE-201E-L products
More informationFX Supervisory Controller Upgrade and Migration Instructions Technical Bulletin
F Supervisory Controller Upgrade and Migration Instructions Technical Bulletin F Supervisory Controllers, F Server Code No. LIT-12011441 Issued October 2017 Refer to the QuickLIT website for the most up-to-date
More informationPRODUCT GUIDE. Intelligent Building Automation and Control. Intelligent Buildings Energy & Sustainability Automation & Control Security
PRODUCT GUIDE Intelligent Building Automation and Control Intelligent Buildings Energy & Sustainability Automation & Control Security 1 Introduction 2 VYKON is an open, intelligent building automation
More informationPEAK TM. PEAK TM controllers. Mid-Market BAS Smart equipment controllers. HVAC/R controllers
Virtual Branch ecatalogue click here controllers HVAC/R controllers The PEAK 18 and PEAK 32 Controllers are configurable controllers that can be switched between MS/TP, Modbus RTU, and N2 Communication
More informationSmart Equipment Controls (SEC)
Smart Equipment Controls (SEC) Product Bulletin SE-SPU1001-0, SE-SPU1002-0, SE-SPU1011-0, SE-SPU1011-0, SE-SPU1012-0, SE-SPU1004-0, SE-FDD1001-0, SE-ECO1001-0, SE-COM1001-0 Code No. LIT-12011934 Issued
More informationFeatures Communication Using Commonly Accepted IT Standards, Including Web Services, at the Automation and Enterprise Level Web-Based User Interface
MS-NAE35xx-x, MS-NAE45xx-x, MS-NAE55xx-x, NAE8500-0 Code No. LIT-1900195 Software Release 6.5 Issued February 14, 2014 Supersedes June 17, 2013 Network Automation Engines (NAEs) provide comprehensive equipment
More informationFX Input/Output (I/O) Modules XM07 and XM14
Product Bulletin FX I/O Modules Issue Date July 6, 2009 FX Input/Output (I/O) Modules XM07 and XM14 The FX Input/Output (I/O) Modules provide additional physical input and output points for FX field controllers
More informationNetwork Integration Engine (NIEx9) for Third-Party Integrations Catalog Page
Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page MS-NIE29xx-0, MS-NIE39xx-x, MS-NIE49xx-x, MS-NIE59xx-x, MS-NIE89xx-x Code No. LIT-1900881 Software Release 9.0 Issued December
More informationOnCell G3100 Series Quick Installation Guide
OnCell G3100 Series Quick Installation Guide Edition 4.1, August 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationHardware manual. 1. Overview 2. Technical characteristics 3. Connections. ( Portal (../portal/portal.html)
1 (http://nethix.com) Portal (../portal/portal.html) WE110 (../we110/we110.html) WE120 (../we120/we120.html) WE300 (../we300/we300.html) WE500 (we500.html) Quick start guide (we500_qsg.html) Hardware manual
More informationFX-PCX Expansion Input/Output Modules Catalog Page Code No. LIT Issued April 17, 2015
Expansion Input/Output Modules Catalog Page Code No. LIT-1900671 Issued April 17, 015 The s are expansion I/O modules with integral RS-5 MS/TP communications. Note: At FX-PCT Release 10.1, FX-PCVs, FX-PCGs,
More informationMega_Link Telemetry Communication System
Mega_Link Telemetry Communication System Overview Mega_Link is a low-cost and versatile telemetry communication system for passing two-way instrumentation, measurement and control data between industrial
More informationTurck Cloud Gateway UMTS Gateway TCG20-UMTS-1ETH-CRS-01
End-to-end encryption of all communications (TLS v1.2, AES128/AES256) 1x Ethernet port 1x CAN interface 1x serial interface RS232/RS485 Modbus TCP client/server Modbus RTU master/slave OPC-UA server CODESYS
More informationFX20/FX60 Supervisory Controllers Installation Instructions
Installation Instructions Issue Date April 9, 2014 FX20/FX60 Supervisory Controllers Installation Instructions Application The FX20 and FX60 are Web-based supervisory class controllers in the Facility
More informationZ-GPRS2-SEAL THE SIMPLEST REMOTE MANAGEMENT SYSTEM FOR UNIVERSAL APPLICATIONS GSM/GPRS DATALOGGER WITH BUILT-IN I/O S AND TELECONTROL FUNCTIONS
e & Designed GSM / GPRS ETHERNET SMTP HTTP MODBUS TCP-IP USB MODBUS RTU THE SIMPLEST REMOTE MANAGEMENT SYSTEM FOR UNIVERSAL APPLICATIONS www.seneca.it taly 100% ad I in GSM/GPRS DATALOGGER WITH BUILT-IN
More informationcontroller data sheet JACE 8000 PRODUCT DEFINITION
data sheet JACE 8000 controller PRODUCT DEFINITION The JACE 8000 is a compact, embedded IoT (Internet of Things) controller and server platform for connecting multiple and diverse devices and sub-systems.
More informationOverview of the Cisco VG224 Voice Gateway
CHAPTER 1 This chapter provides a brief description of the Cisco VG224 voice gateway (VG) and contains the following sections: Overview, page 1-1 Cisco VG224 Voice Gateway Deployment, page 1-4 Interfaces
More informationUC-8410A Quick Installation Guide
UC-8410A Quick Installation Guide Edition 1.0, May 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa
More informationIOT-GATE-iMX7 Datasheet
IOT-GATE-iMX7 Datasheet Industrial Internet of Things Gateway Product Specification v.1.3 Capable, compact, affordable: i.mx7 Dual IoT-Gate has been designed to answer demanding IoT application requirements
More informationMultiple Channel Approach. Marc Bertolin Regional Account Manager - Products
Multiple Channel Approach Marc Bertolin Regional Account Manager - Products Channel Business - Canada Johnson Controls Indirect Channels 49% Direct Channel 51% 2 Johnson Controls, Inc. 2013 Channel Breakdown
More informationXPress DR+W Quick Start Guide
Industrial Device Server Quick Start Guide 2006 Copyright Lantronix is a trademark of Lantronix. All rights reserved. 900-446 Rev. A 10/06 XPRESS DR+W QUICK START CONTENTS What s In the Box..........................................................2
More informationArm-based DIN-rail industrial computers with 4 serial ports, 2 LAN ports, 8 DI/DO, and VGA. Features and Benefits. Certifications
IA260 Series Arm-based DIN-rail industrial computers with 4 serial ports, 2 LAN ports, 8 DI/DO, and VGA Features and Benefits Cirrus Logic EP9315 Arm9 CPU, 200 MHz 128 MB RAM onboard, 32 MB flash disk
More informationStandard protocol support (e.g. MODBUS, SNMP, M-Bus), possibility to install dedicated user protocols
NPEM1000 series Programowalny Programmable automation kontroler automatyki controller (PAC) is the newest series of industrial computers which you can easily adapt to your needs by choosing from the available
More informationStandard protocol support (e.g. MODBUS, SNMP, M-Bus), possibility to install dedicated user protocols
ModBerryM1000 series Programowalny Programmable automation kontroler automatyki controller (PAC) is the newest series of industrial computers which you can easily adapt to your needs by choosing from the
More informationTerminals. Spectrometer Probes. i::scan Ionselective. Probes. Physical Probes. Terminals. Software System. Configuration. Monitoring Stations
Physical con::cube con::lyte 63 Sonstige Daten con::cube Physical latest generation of s::can terminal high-peformance, power efficient industrial PC based on Intel Atom technology and 4 GB onboard memory
More informationDKG-210 UNIVERSAL INTERNET GATEWAY UNIT
DKG-210 UNIVERSAL INTERNET GATEWAY UNIT AC & DC SUPPLY VERSIONS DESCRIPTION The DKG-210 is designed for internet monitoring and control of industrial devices using different protocols through the RAINBOW
More informationAPS SCALE SERIES DIMENSIONS
APS SCALE SERIES DIMENSIONS 4300 Section page 4 Model APS4300 Recommended Column/Base Combinations 14 Atlas Column 20 Atlas Column 30 Atlas Column Atlas Scale Series Dimensions: 4300 OPTIONS 4300 Section
More informationTerminals. Spectrometer Probes. i::scan Ionselective. Probes. Physical Probes. Terminals. Software System. Configuration. Monitoring Stations
Physical con::lyte 57 Sonstige Daten Physical latest generation of s::can terminal high-peformance, power efficient industrial PC based on Intel Atom technology and 4 GB onboard memory wide screen color
More informationLCS85 Turnkey User's Guide Part No , Rev. F Software Release 6.1 Issued June 17, 2013 Supersedes January 30, 2011
MS-LCS8520-0 Part No. 24-10526-11, Rev. F Software Release 6.1 Issued June 17, 2013 Supersedes January 30, 2011 Refer to the QuickLIT website for the most up-to-date version of this document. LCS85 Turnkey
More informationFX80 Supervisory Controller Installation Instructions
FX-SC8BASE-0, FX-SC8BASE-700 Applications This document describes how to mount and wire the following: DIN-mount, 24 VAC/DC powered FX80 controller Wall-mount, Class 2 universal AC power adapter supplying
More informationManual# Installation Manual. 200E Series. DCU 210E/208E Engine Panel RP 210E/220E Remote Panel
Manual# 1006495 Installation Manual 200E Series DCU 210E/208E Engine Panel RP 210E/220E Remote Panel Installation Manual for the Marine Pro 200E Series ~~~ DCU 210E/208E Diesel Engine Control Unit RP 210E/220E
More informationINTELLIGENT SOLUTION MANAGING AUTOMATION
INTELLIGENT SOLUTION MANAGING AUTOMATION isma is the own brand of Global Control 5 Sp. z o. o. that includes comprehensive solutions for building automation. The possibilities of the offered systems are
More informationAX3-PPC, AX3-PPC-O, Programmable Plant Controllers
AX3-PPC, AX3-PPC-O, Programmable Plant Controllers INSTALLATION INSTRUCTIONS Instructions in this document apply to the products listed in Table 1. Not covered in this document is the WEBs-AX software
More informationIntroducing. and the. An introduction to the most advanced web-enabled open controls technology available today. Phil Barnett- Tridium Europe Ltd
Introducing and the An introduction to the most advanced web-enabled open controls technology available today Phil Barnett- Tridium Europe Ltd Company Facts Niagara Framework launched in 1998 US Company
More informationDupline. Data Logger. Types G , G Product Description. Ordering Key G Type Selection. Input/Output Specifications
Dupline Data Logger Types G 800 006, G 800 106 Product Description Programmable channel generator with optional built-in GSM Modem Event and time based data logging functions for digital, analog and counter
More informationEC-Net AX Product Releases. Available since August 14, 2012
Product Release Document ECN-2012-001 08-14-12 Available since August 14, 2012 EC-Net AX Product Releases EC-Net AX 3.6, BACnet OWS and AWS Drivers for EC-Net AX Supervisor, EC-Net (R2) to EC-Net AX Replacement
More informationMM-IM. Large works automation And data gateway. PRODUCT DATASHEET
MM-IM Large works automation And data gateway. PRODUCT DATASHEET The MM-IM is a Remote Telemetry Unit (RTU) that provides a wide range of interfaces and protocols to allow integration with any typical
More informationFEC - FAC. Metasys controllers. Complex BAS Programmable controllers. Catalog Page. Field Equipment Controllers
Field Equipment Controllers The Metasys Field Equipment Controllers (FEC) are a complete family of BACnet compatible field controllers and accessories designed with the flexibility to meet a wide range
More informationEAGLEHAWK Controller. Product Data. U.S. Registered Trademark Copyright 2016 Honeywell Inc. All Rights Reserved
EAGLEHAWK Controller Product Data GENERAL EAGLEHAWK is a BACnet-compliant heating, ventilation, air conditioning (HVAC) building controller. It runs the CentraLine Niagara framework, integrating all trades
More informationEasyIO FC20 User Reference v1.3. EasyIO FC 20 DDC User Reference V1.3
EasyIO FC 20 DDC User Reference V1.3 Document Change Log 1 st April 2013 Document created. 13 th July 2013 Software configurations added. 27 th Sept 2014 FC now support pulse input. 6 th June 2015 Serial
More informationFX Tools Express Software Package
Product Bulletin FX Tools Express Issue Date October 31, 2005 FX Tools Express Software Package FX Tools Express is a Windows based software package for configuring, downloading and commissioning of predefined
More informationWEB-300E, WEB-600E/U, CP-300E, CP-600E/U Series Controllers
WEB-300E, WEB-600E/U, CP-300E, CP-600E/U Series Controllers INSTALLATION INSTRUCTIONS Related Documentation For more information on configuring and using the WEB- 300E or WEB-600E/U controller, refer to
More informationFeatures. Preliminary. Industrial IEEE b/g/n with 2x10/100Base-T(X) 1x RS-232/422/485 IoT LTE LPWAN Gateway. Introduction
IMG-4312-MN Industrial IEEE 802.11 b/g/n with 2x10/100Base-T(X) 1x RS-232/422/485 IoT LTE LPWAN Gateway Features Provide 2x10/100Base-T(x) port and single SIM card slot LTE CAT-M1/CAT-NB1 model included
More informationDTM Distributed Transmitter Monitor
Distributed Transmitter Monitor 96 Communication Module The 96 functions as an RS232 to RS485 convertor and / or enables (32) modules to be networked together via Modbus. Combined with the -CFG configuration
More informationELECTRONIC CONTROLS & SENSORS. AK-SC255 Fact Sheet Version R Software Software version 02_085
ELECTRONIC CONTROLS & SENSORS AK-SC255 Fact Sheet Version R Software Software version 02_085 What s in the Box? 1x AK-SC255 (either Box or DIN rail screen-less version) What are the different part numbers?
More informationUCM 94/1 3G/GPRS Modem for RTU32 Series
UCM 94/1 3G/GPRS Modem for RTU32 Series Data Sheet 40332 v1.00 / May 1 st, 2013 INTRODUCTION UCM 94/1 is an industrial 3G/UMTS/GPRS Modem designed for use with the Brodersen RTU32 Series. The UCM 94 support
More informationpco5 Overview February 2010 Air Conditioning Business Unit pco5 Overview slide n. 1
pco5 Overview February 010 Air Conditioning Business Unit pco5 Overview slide n. 1 pco5 pco5 Overview The most advanced CAREL programmable controller. Designed for multiple applications in the fields of
More informationiologik 2500 HSPA/GPRS/WLAN Series
iologik 2500 HSPA/GPRS/WLAN Series Smart wireless remote I/O with Click&Go Plus Logic Introduction The iologik 2500 is a smart remote I/O product with unique hardware and software designs, making it an
More informationFX14 Field Controller
Product Bulletin FX14 Field Controller Issue Date January 22, 2010 FX14 Field Controller The FX14 is a high performance field controller designed specifically for commercial Heating, Ventilating, Air Conditioning,
More informationiopac 8020 Series Rugged modular RTU controllers Overview Programmable RTU Controllers Ethernet bypass feature for seamless data transmission
iopac 8020 Series Rugged modular RTU controllers Compliant with EN 50121-3-2, EN 50121-4, and a portion of EN 50155 specifications Supports C/C++ programming languages 2-port Ethernet switch for daisy-chain
More information2.4. LinPAC-8000 Series
.. LinPAC-000 Overview Compared with the first generation LinCon-000, not only is the CPU performance improved have been added (from 0 MHz to 0 or 00 MHz) and uses an upgraded OS from Linux kernel. to
More informationFieldServer X-25 Start-Up Guide
Sierra Monitor Company FieldServer X-25 Start-Up Guide APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after April 2013 Kernel Version: 6.10 Document Revision: 0 FieldServer FS-X25 Start-Up
More informationTG Technical specifications
TG2-500 Technical specifications TBox TG2-500 Specifications SPECIFICATIONS Standard: 3 wires 4G Modem -4E: Europe -4N: North America Backup battery charger TG2-500: COMMUNICATION PORTS TG2-500-4E: COMMUNICATION
More informationFeatures and Benefits. Certifications
UC-5100 Series Arm-based Industrial computing platform for industrial automation Features and Benefits Armv7 Cortex-A8 1000 MHz processor Dual auto-sensing 10/100 Mbps Ethernet ports 4 software-selectable
More informationAPP 700 Technical Specification
Issued: 12/12 Supersedes: 4/12 Description The APP 700 hardware series are especially designed for waste and clean water systems, both in construction and functionality. The RTUs¹ are developed to meet
More informationUser Manual Entry Line Industrial Fast Ethernet Switch 5x 10/100Base-TX
User Manual Entry Line Industrial Fast Ethernet Switch 5x 10/100Base-TX Entry Line Fast Ethernet Switch Fast Ethernet Switch for Industrial Use Page 2/11 Table of Contents General... 3 Benefits... 3 Front
More informationBACnet Controller for General-purpose Building Applications
Specifications BACnet Controller for General-purpose Building Applications General Model WJ-1101 is the BACnet controller to be used for a wide range of building applications such as air-conditioning and
More informationSATEL I-LINK 100 MB I/O-converter User Guide, Version 1.1
TABLE OF CONTENTS TABLE OF CONTENTS... 1 IMPORTANT NOTICE... 2 PRODUCT CONFORMITY... 3 WARRANTY AND SAFETY INSTRUCTIONS... 4 1 GENERAL... 5 1.1 SATEL I-LINK 100 MODBUS I/O- CONVERTER... 5 2 SPECIFICATIONS...
More informationStandard protocol support (e.g. MODBUS, SNMP, M-Bus), possibility to install dedicated user protocols
NPE9500 Programmable Programowalny automation kontroler automatyki controller (PAC) is the newest series of industrial computers which you can easily adapt to your needs by choosing from the available
More informationUser Manual. MS657208X Industrial Gigabit Ethernet Switch 8x 10/100/1000Base-T
User Manual MS657208X Industrial Gigabit Ethernet Switch 8x 10/100/1000Base-T CE MARKING This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE,
More informationAC5160 SiPass integrated controller kit
AC5160 SiPass integrated controller kit SiPass integrated Wall housing with pre-assembled basic SiPass integrated components Equipped with one ACC (AC5100), two dual reader interfaces (ADD5100) and one
More informationRST100 Alert & Tracking Solutions
RST100 Alert & Tracking Solutions The Beam Remote Satellite Terminal RST100 provides reliable and convenient global telecommunications access voice, data & messaging services via the Iridium satellite
More informationIA240/241 Hardware User s Manual
Third Edition, April 2008 www.moxa.com/product 2008 Moxa Inc., all rights reserved. Reproduction without permission is prohibited. Any software described in this manual is furnished under a license agreement
More information4 Port Industrial RS-232 / 422 / 485 Serial to IP Ethernet Device Server - PoE-Powered - 2x 10/100Mbps Ports
4 Port Industrial RS-232 / 422 / 485 Serial to IP Ethernet Device Server - PoE-Powered - 2x 10/100Mbps Ports Product ID: NETRS42348PD The PoE-powered NETRS42348PD 4-Port Industrial Serial Device Server
More informationTEC Terminal Box (VAV) Controller
Document No. 540-1025 TEC Terminal Box (VAV) Controller Generic Controller I/O Layout. See Wiring Diagram for application specific details. Control Applications 2020 through 2027 Product Description These
More informationFX30E/FX60E Supervisory Controllers Installation Instructions
FX30E/FX60E Supervisory Controllers Installation Instructions FX30E/FX60E Part No. 24-10174-115, Rev. D Issued July 16, 2015 Application The FX30E and FX60E are web-based supervisory class controllers
More informationEAGLEHAWK NX Controller
EAGLEHAWK NX Controller Product Data GENERAL EAGLEHAWK NX is a BACnet-compliant heating, ventilation, air conditioning (HVAC) building controller. It runs the CentraLine Niagara NX framework, integrating
More informationTONN/... Trend Open Network Node
Trend Open Network Node Trend Open Network Node Description The Trend Open Network Node (TONN) is a Trend network device that enables the Trend system to interface with 3rd party systems such as BACnet,
More informationEAGLEHAWK Controller. Product Data. U.S. Registered Trademark Copyright 2016 Honeywell Inc. All Rights Reserved
EAGLEHAWK Controller Product Data GENERAL EAGLEHAWK is a BACnet-compliant heating, ventilation, air conditioning (HVAC) building controller. It runs the CentraLine Niagara framework, integrating all trades
More informationModBerryM500 series. Features of new. ModBerryM500 ASK FOR NEW RASPBERRY PI 3 B+
ModBerryM500 series Programowalny Programmable automation kontroler automatyki controller (PAC) Our device NPE M500 is now available with latest, third gen. Raspberry Pi 3 Model B+. Our upgraded NPE M500
More informationAdvanced Application Field Equipment Controller (FAC) Catalog Page
Advanced Application Field Equipment Controller (FAC) Catalog Page Code No. LIT-1900759 Issued February 018 Refer to the QuickLIT website for the most up-to-date version of this document. The Advanced
More informationBaltos ir Contact Online. More Pictures. Click on the thumbnails for the large picture
VS Vision Systems GmbH / Part Number 6831 Features Sitara AM3352 Cortex-A8 @ 600MHz 256MB DDR3 256MB NAND Flash (for boot) 1 x SD-Slot 3 x LAN (1 Gigabit, 2 Fast Ethernet) 2 x USB 2.0 Host 2 x RS232/422/485
More informationNIE59 Network Integration Engine Figure 1: NIE59 Network Integration Engine
Network Integration Engine (NIEx9) for 3rd Party Integrations Product Bulletin MS-NIE59xx-1E, MS-NIE49xx-2E MS-NIE39xx-2E, MS-NIE29xx-0E Software Release 5.1 Issued Mar 23, 2011 Network Integration Engines
More informationRemote monitoring and display solutions
siemens.com/sitransrd Remote monitoring and display solutions Instrumentation readings in any location including over the web for around-the-clock monitoring. Answers for industry. Get your instrumentation
More informationNPort 6600 Series Quick Installation Guide
NPort 6600 Series Quick Installation Guide Edition 10.0, November 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationEasyIO FW 08VUser Reference
EasyIO FW 08VUser Reference 1 Document Change Log 26 th Dec 2016 Document created. 2 Disclaimer EasyIO FW 08V is a product by EasyIO Holdings Pte Ltd The EasyIO FW 08V was built on the Sedona Framework.
More informationWireless Gateway ARG600 Product Guide
Wireless Gateway Product Guide Contents 1. Description... 3 2. Complete communication system...3 3. Application... 4 4. Physical interfaces...5 5. Communication... 11 6. Technical data...12 7. Mounting...16
More informationBUILDING MANAGEMENT. OpenBAS-HV-NX10 SERIES CATALOG NUMBER. Description. Features
BUILDING MANAGEMENT OpenBAS-HV-NX10 SERIES Description Mircom s OpenBAS-HV-NX10 series of Building Automation Controllers are aimed to provide various HVAC, energy management, and lighting control solutions
More informationConnected IoT applications
Connected IoT applications Terminals devices The future is exciting. Ready? Terminals The best choice for Internet of Things (IoT) Terminals combine high-quality hardware with preconfigured IoT connectivity
More information