Coin Cells. Introduction. the swiss power source

Transcription

1 Introduction Since 98, when RENATA launched the industrial production of lithium batteries, the range of applications has grown continuously. In addition to the wide spectrum of memory backup power sources, RENATA lithium batteries are used for different applications in the computer and automotive industries, telecommunications, medical industry and in an increasing number of portable devices (measuring equipment, payment systems, toys etc.). RENATA lithium batteries meet the highest quality standards and offer excellent reliability. Advantages Nominal voltage of V, approx. twice the voltage level of alkaline button cells Wide operating temperature range depending on battery model Low self discharge of less than % per year at C Best practical capacity/volume ratio Superior leakage resistance Excellent storage characteristics, up to years storage with minimum deterioration Safe products: all Renata and MFR coin cells are UL-recognized products (File No. MH4) Environmental-friendly, do not contain toxic substances No air transport restrictions (non hazardous) Available in a wide range of solder contact configurations or in combination with our battery holders the swiss power source 5

2 Standard bare coin cells General characteristics Self-discharge: less than % per year at C Shelf life: up to years at max. C Stable voltage during shelf life High reliability of operation, including leakage resistance Contains no heavy metals Dimensions and weights Model Max. Dimensions (mm) approx Part.No.* A B C D Weight (g) CR5. Ref. 6. min CR6 MFR.6 Ref.. min CR MFR. Ref.. min CR5 Ref. 9. min CR Ref.. min CR6 6.. Ref.. min CR6 6.. Ref.. min CR6 MFR..6 Ref. 8. min CR5 MFR. Ref. 7. min.5 7 CR MFR.. Ref. 7. min CR.. Ref. 8. min CR5. Ref. 9. min CR4 MFR 4.5. Ref.. min CR Ref.. min CR45N Ref.. min CR477N Ref..4 min *Packaging: Industrial Bulk (IB-Trays) 6

3 Electrical characteristics Model Nominal capacity Standard discharge current Max. continuous discharge current Operating Temperature (mah) (ma) ) (ma) ) (C) ) CR /+85 CR6 MFR.. -/+7 CR MFR 4.. -/+7 CR /+85 CR /+85 CR /+85 CR /+85 CR6 MFR 9.. -/+7 CR5 MFR /+7 CR MFR /+7 CR /+85 CR /+85 CR4 MFR /+7 CR /+85 CR45N /+85 CR477N /+85 ) Standard discharge current: % of nominal capacity is obtained by discharging the cells at this current rates. ) The maximum current is determined for a yield of 7% of the nominal capacity with a cut-off voltage of.v, at C. For currents exceeding those given above or pulsed current, please contact Renata. ) In applications where the battery is exposed to temperatures above 7 C, please contact Renata for consultancy. the swiss power source 7

4 Standard bare coin cells CR5 Rated capacity: mah Average weight:.6 g CR6 MFR Rated capacity: mah Average weight:.7 g ø -. ø. ± max.. min Discharge performance at C 47 k Discharge performance at C k 8.5 k k k Discharge performance at C Discharge performance at C.5.5 k Ω k k C Load 47 k C 7 C 4 5 C C C 7 C C Load 47 k Ω 4 7 C C C - C C C C - C 8

5 CR MFR Rated capacity: 4 mah Average weight:.8 g CR5 Rated capacity: 48 mah Average weight:.9 g ø -. Ref. ø9 -. min Discharge performance at C k 8.5 k k k.5.5 Discharge performance at C 5 k 7 k Discharge performance at C k k.5.5 Discharge performance at C. k 68. k 5 k C C C Load k C C - C Load 7 k 7 C C C C C - C C C C - C the swiss power source 9

6 Standard bare coin cells CR66 Rated capacity: 5 mah Average weight:. g CR6 Rated capacity: 68 mah Average weight:. g ø6 -. Ref. ø.6 -. min.. Discharge performance at C Discharge performance at C k 7 k k 5.5 k Discharge performance at C Discharge performance at C.5.5. k k 68. k Ω 5 k k Ω68. k Ω 5 k Ω C - C Load 7 k 7 C C.5.5 C - C C Load 5.5 k C C C C - C C C C - C 7 C

7 CR6 Rated capacity: 5 mah Average weight:.8 g CR6 MFR Rated capacity: 9 mah Average weight:.7 g ø6 -. Ref. ø ø -. Ref. ø8. -. min Discharge performance at C 8.5 k 6. k Discharge performance at C k k 6. k Discharge performance at C Discharge performance at C k 47 k 68 k k 68. k C - C Load 6. k 7 C C C C - C C Load 7 k C C C - C 7 C C C C - C the swiss power source

8 Standard bare coin cells CR5 MFR Rated capacity: 65 mah Average weight: g CR MFR Rated capacity: 5 mah Average weight:.8 g ø -. Ref. ø Discharge performance at C 6.8 k k k Discharge performance at C 6.8 k k Discharge performance at C 7 k 68. k Discharge performance at C 7 k 47 k 68. k Load k - C C C 7 C C - C C 7 C Load k C C C - C 5 7 C 5 5 C C - C

9 CR Rated capacity: 5 mah Average weight:.7 g CR5 Rated capacity: 9 mah Average weight:. g ø -.4 ø -.4 Ref. ø8 Ref. ø9 -. min Discharge performance at C 6.8 k k 6. k -. min Discharge performance at C 6.8 k 8.5 k k Discharge performance at C Discharge performance at C k 68. k k 47 k C C 7 C Load 6. k C.5.5 C - C C Load k C C C C - C 7 C C C C - C 7 C the swiss power source

10 Standard bare coin cells CR4 Rated capacity: 85 mah Average weight: 4. g CR4 MFR Rated capacity: mah Average weight: 4. g ø ø Ref. ø Ref. ø -. min Discharge performance at C 5.6 k 6.8 k -. min..8.7 k Discharge performance at C.7 k k 6.8 k Discharge performance at C Discharge performance at C.5.5 kω 7 kω kω kω C - C Load k 7 C C C 6 C - C C Load k C C - C C 5 7 C C C C - C 4

11 CR45N Rated capacity: 54 mah Average weight: 5.9 g CR477N * Rated capacity: 95 mah Average weight: 8. g ø ø Ref. ø. Ref. ø Discharge performance at C.7 k k Discharge performance at C.67 k 4.7 k Discharge performance at C Discharge performance at C k k 7 k k k 6. k C - C Load 6.8 k 7 C C.5.5 C - C C Load 4.7 k C C C C - C 7 C C C C - C 7 C * Battery ist not user replaceable the swiss power source 5

12 Packaging options Coin cells can be supplied in different packaging Industrial Bulk multi-cell plastic trays Packaging Code: IB Industrial Bulk packaging is the standard packaging for manufacturers. The number of coin cells per plastic tray depends on the respective model. So does the number of plastic trays per shrink pack. Singly packaged coin cells in blistered Card Units Packaging Code: CU Card Unit packaging is e.g. used in replacement and retail business. There is one coin cell in a Card Unit, ten Card Units in a small box and ten small boxes in a bigger box. Five coin cells packaged in blistered Tear Strips Packaging Code: TS Tear Strip packaging is e.g. used in retail or DIY stores. There are five coin cells in a Tear Strip, four Tear Strips in a small box and five small boxes in a bigger box. Blistered multi-cell Bulk Tray Packaging Code: BT Bulk Tray packaging is e.g. used by small internet or catalogue distributors. The number of coin cells per Bulk Tray depends on the respective model. So does the number of plastic trays per cardboard box. Example: The Renata Part Name of CR coin cells in industrial bulk packaging is CR.IB. Example: The Renata Part Name of singly packaged CR66 coin cells in card units is CR66.CU. 6