AutoCAD. Essentials of Customizing AutoCAD Autodesk. Official Training Courseware (AOTC) A May 2007
|
|
- August Bradley
- 5 years ago
- Views:
Transcription
1 AutoCAD 2008 Essentials of Customizing AutoCAD Autodesk Official Training Courseware (AOTC) A May 2007
2 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK, INC., MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS, AND MAKES SUCH MATERIALS AVAILABLE SOLELY ON AN AS-IS BASIS. IN NO EVENT SHALL AUTODESK, INC., BE LIABLE TO ANYONE FOR SPECIAL, COLLATERAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF ACQUISITION OR USE OF THESE MATERIALS. THE SOLE AND EXCLUSIVE LIABILITY TO AUTODESK, INC., REGARDLESS OF THE FORM OF ACTION, SHALL NOT EXCEED THE PURCHASE PRICE, IF ANY, OF THE MATERIALS DESCRIBED HEREIN. Autodesk, Inc., reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future. Autodesk Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what s>next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer s Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Studio (design/ logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert, DWG TrueView, DXF, EditDV, Education by Design, Extending the Design Team, FBX, Filmbox, FMDesktop, GDX Driver, Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, imout, Incinerator, IntroDV, Kaydara, Kaydara (design/logo), LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, ObjectARX, ObjectDBX, Open Reality, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, Reactor, RealDWG, Real-time Roto, Render Queue, Revit, Showcase, SketchBook, StudioTools, Topobase, Toxik, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus, Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, and Wiretap. Autodesk Canada Co. Trademarks The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner, Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, Wire. Third Party Trademarks All other brand names, product names, or trademarks belong to their respective holders. Third Party Software Credits and Attributions Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. ACIS Copyright Spatial Corp. Copyright The Apache Software Foundation. All rights reserved. This product includes software developed by the Apache Software Foundation ( subject to its license terms and conditions ( Typefaces from the Bitstream typeface library Copyright HLM Copyright D-Cubed Ltd HLM is a trademark of D-Cubed Ltd. AutoCAD 2008 and AutoCAD LT 2008 are produced under a license of data derived from DIC Color Guide from Dainippon Ink and Chemicals, Inc. Copyright Dainippon Ink and Chemicals, Inc. All rights reserved. DIC and DIC Color Guide are registered trademarks of Dainippon Ink and Chemicals, Inc. Portions of this software are based on the work of the Independent JPEG Group. Active Delivery Inner Media, Inc. All rights reserved. ISYS and the ISYS logo are registered trademarks or trademarks of ISYS Search Software Inc. Copyright Sam Leffler. Copyright Silicon Graphics, Inc. Copyright Lingea s.r.o The New Features Workshop contains Macromedia Flash Player software by Macromedia, Inc. Copyright Macromedia, Inc. All rights reserved. Macromedia and Flash are registered trademarks or trademarks of Adobe Systems Incorporated in the United States or other countries. Copyright Macrovision Corporation. All rights reserved. Copyright Microsoft Corporation. All rights reserved. Copyright 2002 Joseph M. O Leary. PANTONE Colors displayed in the software application or in the user documentation may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color.
3 PANTONE and other Pantone, Inc. trademarks are the property of Pantone, Inc. Pantone, Inc., Pantone, Inc. is the copyright owner of color data and/or software which are licensed to Autodesk, Inc., to distribute for use only in combination with certain Autodesk software products. PANTONE Color Data and/or Software shall not be copied onto another disk or into memory unless as part of the execution of this Autodesk software product. Typefaces from Payne Loving Trust 1992, All rights reserved. RAL DESIGN RAL, Sankt Augustin, RAL CLASSIC RAL, Sankt Augustin, Representation of the RAL Colors is done with the approval of RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.v. (RAL German Institute for Quality Assurance and Certification, re. Assoc.), D Sankt Augustin. This product includes code licensed from RSA Security, Inc. Some portions licensed from IBM are available at The Sentry Spelling-Checker Engine Copyright Wintertree Software, Inc. Portions of this product include one or more Boost libraries. Use of the Boost libraries is subject to its license agreement Government Use Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR (Commercial Computer Software-Restricted Rights) and DFAR (Rights in Technical Data and Computer Software), as applicable. Published By: Autodesk, Inc. 111 Mclnnis Parkway San Rafael, CA 94903, USA
4
5 Contents Introduction ix Chapter 1: Customizing AutoCAD Lesson: Using Workspaces Overview About Workspaces Workspace Settings Dialog Box The Customize User Interface Dialog Box Creating and Activating Workspaces Exercise: Create a Workspace for Visualization Lesson: Creating Keyboard Shortcuts Overview About Customization Files Customize User Interface Dialog Box About Macros About Custom Keyboard Shortcuts Working with Keyboard Shortcuts Guidelines for Customization Exercise: Prepare the Software for Customization Exercise: Create a Keyboard Shortcut Lesson: Customizing Toolbars Overview About Custom Toolbars Toolbar Menu Options Customizing Toolbars Guidelines for Customizing Toolbars Exercise: Customize Toolbars Lesson: Customizing Dashboard Panels Overview About Custom Dashboard Panels Dashboard Panel Menu Options Creating Custom Dashboard Panels Guidelines for Customizing Dashboard Panels Exercise: Create Custom Dashboard Panels Lesson: Creating and Modifying Double-Click Actions Overview About Double-Click Actions Creating and Modifying Double-Click Actions Exercise: Create a Double-Click Action v
6 Lesson: Customizing Menus Overview About Custom Menus Menu Customization Options Customizing Menus Exercise: Create a Custom Menu Lesson: Migrating Customization Files Overview About the Migrate From a Previous Release Tool Export and Import AutoCAD Settings Tools About the Customize User Interface Dialog Box Migrating Custom Toolbars Exercise: Migrate a Custom Toolbar Chapter Summary Chapter 2: Creating Custom Scripts and Objects Lesson: Using Script Files Overview About Script Files Working with Script Files Exercise: Set Up a Drawing by Using Scripts Lesson: Creating and Using Linetypes and Hatch Patterns Overview About Custom Linetypes Creating and Using Custom Linetypes About Custom Hatch Patterns Creating Custom Hatch Patterns Exercise: Create and Use a Linetype Exercise: Create and Use a Custom Hatch Pattern Lesson: Creating and Using Custom Shapes Overview About Custom Shapes Process of Creating and Using Custom Shapes Exercise: Create and Use a Custom Shape Lesson: Working with Custom Applications Overview Custom Applications Loading and Running Custom Applications Exercise: Load and Run Custom Applications Chapter Summary Chapter 3: Working with Tool Palettes Lesson: Configuring Tool Palettes Overview About Tool Palettes Tool Palettes Options Exercise: Set Tool Palettes Options vi Contents
7 Lesson: Creating Custom Tool Palettes Overview About Content Tools About Command Tools Creating Tool Palettes Exercise: Create a New Tool Palette with Custom Tools Lesson: Organizing Tool Palettes Overview About Tool Palette Groups Creating and Activating Tool Palette Groups Exercise: Create and Activate a Custom Palette Group Chapter Summary Chapter 4: Managing Custom Tool Palettes Lesson: Standardizing Tool Palettes Overview About Tool Properties Setting Tool Palettes Read-Only Exercise: Standardize Tool Palettes Lesson: Sharing Tool Palettes Overview Sharing Tool Palettes Working with Tool Palette Files on Networks Exercise: Share Tool Palettes Chapter Summary Chapter 5: Project Exercise Project Exercise: Customize AutoCAD Chapter Summary Appendix A: Additional Support and Resources Courseware from Autodesk Autodesk Services & Support Autodesk Subscription Autodesk Consulting Autodesk Partners Autodesk Authorized Training Centers Autodesk Certification Useful Links Contents vii
8 viii Contents
9 Introduction Welcome to the AutoCAD 2008: Essentials of Customizing AutoCAD Autodesk Official Training Courseware (AOTC), training courseware for use in Authorized Training Center (ATC) locations, corporate training settings, and other classroom settings. Although this courseware is designed for instructor-led courses, you can also use it for self-paced learning. The courseware encourages self-learning through the use of the AutoCAD Help system. This introduction covers the following topics: Course objectives Prerequisites Using this courseware Default installation CD contents Completing the exercises Installing the exercise data files from the CD Imperial and metric datasets Notes, tips, and warnings Feedback This courseware is complementary to the software documentation. For detailed explanations of features and functionality, refer to the Help in the software. Course Objectives After completing this course, you will be able to: Customize AutoCAD by creating workspaces, toolbars, dashboard panels, keyboard shortcuts, double-click actions, and menu bars. Create custom script files, linetypes, hatch patterns, and shapes. Describe and access the default tool palettes and their options. Create and organize custom tool palettes. Manage custom tool palettes and plan for their deployment. Describe and use the options for sharing tool palettes with others. ix
10 Prerequisites This course is designed for the experienced user who needs to customize AutoCAD. It is recommended that you have a working knowledge of: The current or a previous release of AutoCAD. Microsoft Windows 2000 or Microsoft Windows XP. Using This Courseware The lessons are independent of each other. However, it is recommended that you complete these lessons in the order that they are presented unless you are familiar with the concepts and functionality described in those lessons. Each chapter contains: Lessons Usually two or more lessons in each chapter. Exercises Practical, real-world examples for you to practice using the functionality you have just learned. Each exercise contains step-by-step procedures and graphics to help you complete the exercise successfully. Default Installation The information in this course is presented in such a way that it is assumed you have installed AutoCAD using the default installation parameters. You should be using the 2D Drafting & Annotation workspace as your active workspace throughout the course. CD Contents The CD attached to the back cover of this book contains all the data and drawings you need to complete the exercises in this course. Completing the Exercises You can complete the exercises in two ways: using the book or onscreen. Using the book Follow the step-by-step exercises in the book. Onscreen Click the AOTC - AutoCAD 2008 Essentials of Customizing AutoCAD icon on your desktop, installed from the CD, and follow the step-by-step exercises on the screen. The onscreen exercises are the same as those in the book. The onscreen version has the advantage that you can concentrate on the screen without having to glance down at your book. x Introduction
11 After launching the onscreen exercises, you might need to alter the size of your application window to align both windows. Installing the Exercise Data Files from the CD To install the data files for the exercises: 1. Insert the courseware CD. 2. When the setup wizard begins, follow the instructions on screen to install the data. 3. If the wizard does not start automatically, browse to the root directory of the CD and doubleclick Setup.exe. Unless you specify a different folder, the exercise files are installed in the following folder: C:\Documents and Settings\All Users\Autodesk Learning\AutoCAD 2008\Customizing AutoCAD After you install the data from the CD, this folder contains all the files necessary to complete each exercise in this course. Introduction xi
12 Imperial and Metric Datasets In exercises that specify units of measurement, alternative files are provided as shown in the following example: Open i_stair_settings.dwg (imperial) or m_stair_settings.dwg (metric). In the exercise steps, the imperial value is followed by the metric value in parentheses as shown in the following example: For Length, enter 13'2" (4038 mm). For exercises with no specific units of measurement, files are provided as shown in the following example: Open c_stair_settings.dwg (common). In the exercise steps, the unitless value is specified as shown in the following example: For Length, enter 400. Notes, Tips, and Warnings Throughout this courseware, notes, tips, and warnings are called out for special attention. Notes contain guidelines, constraints, and other explanatory information. Tips provide information to enhance your productivity. Warnings provide information about actions that might result in the loss of data, system failures, or other serious consequences. Feedback We always welcome feedback on Autodesk Official Training Courseware. After completing this course, if you have suggestions for improvements or if you want to report an error in the book or on the CD, please send your comments to xii Introduction
AutoCAD Customizing with Tool Palettes. Autodesk Training Courseware (AOTC)
AutoCAD 2007 Customizing with Tool Palettes Official Autodesk Training Courseware (AOTC) 00127-050008-1755A September 2006 Copyright 2006 Autodesk, Inc. All rights reserved. This publication, or parts
More informationAutoCAD. Transitioning from AutoCAD Autodesk Official Training Courseware (AOTC) A April 2007
AutoCAD 2008 Transitioning from AutoCAD 2007 Autodesk Official Training Courseware (AOTC) 00128-050008-1700A April 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or
More informationRevit. Migrating to Revit Architecture Autodesk Official Training Courseware (AOTC) Architecture 2009
Migrating to Revit Architecture Autodesk Official Training Courseware (AOTC) Facilitating the Transition to 3D Modeling by Leveraging Your 2D Design Assets Revit Architecture 2009 240A1-050000-CM10A June
More informationAutodesk. Stand-Alone Licensing Guide
Autodesk Stand-Alone Licensing Guide January 2007 Copyright 2007 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.
More informationEssentials Autodesk Official Training Courseware (AOTC) Autodesk. Showcase 2009
Essentials Autodesk Official Training Courseware (AOTC) Autodesk Showcase 2009 262A1-050000-CM00A December 2008 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc.,
More informationEnterprise and Studio Essentials Autodesk Official Training Courseware (AOTC) Autodesk MapGuide 2009
Enterprise and Studio Essentials Autodesk Official Training Courseware (AOTC) Autodesk MapGuide 2009 276A1-050000-CM00A June 2008 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted
More informationAutoCAD. Essentials Autodesk. Official Training Courseware (AOTC) Raster Design 2008
AutoCAD Raster Design 2008 Essentials Autodesk Official Training Courseware (AOTC) 34008-010008-1700A May 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or parts thereof,
More informationAutoCAD. Creating and Presenting 3D Models Autodesk Official Training Courseware A April 2007
AutoCAD 2008 Creating and Presenting 3D Models Autodesk Official Training Courseware 00128-050008-1706A April 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or parts
More informationAutoCAD Conceptual Design. Autodesk Training Courseware (AOTC)
AutoCAD 2007 Conceptual Design Official Autodesk Training Courseware (AOTC) 00127-050008-1705A May 2006 Copyright 2006 Autodesk, Inc. All rights reserved. This publication, or parts thereof, may not be
More informationEssentials for Geospatial Autodesk Official Training Courseware (AOTC) AutoCAD. Map 3D 2009
Essentials for Geospatial Autodesk Official Training Courseware (AOTC) AutoCAD Map 3D 2009 129A1-050000-CM05A June 2008 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk,
More informationAutodesk MapGuide Enterprise Autodesk MapGuide Studio Essentials Autodesk Official Training Courseware (AOTC)
Autodesk MapGuide Enterprise 2008 Autodesk MapGuide Studio 2008 Essentials Autodesk Official Training Courseware (AOTC) 27602-050008-1700A October 2007 Copyright 2007 Autodesk, Inc. All rights reserved.
More informationAutodesk DirectConnect 2010
Autodesk DirectConnect 2010 What's new this release 1 This section outlines enhancements made and new features added to the 2010 version (released 2009) of DirectConnect, along with various bug fixes.
More informationAutoCAD. Civil 3D Essentials Autodesk. Official Training Courseware (AOTC)
AutoCAD Civil 3D 2008 Essentials Autodesk Official Training Courseware (AOTC) 23705-010008-1700A May 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or parts thereof,
More informationAutoCAD. Transitioning from AutoCAD. Essentials. Autodesk Official Training Guide
Autodesk Official Training Guide Essentials AutoCAD 2010 Transitioning from AutoCAD AutoCAD 2009 users moving to AutoCAD 2010 software learn how powerful new features can help them tackle design problems
More informationAutoCAD. Map 3D Essentials. Autodesk Official Training Courseware (AOTC)
AutoCAD Map 3D 2008 Essentials Autodesk Official Training Courseware (AOTC) 12911-010008-1700A May 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Disclaimer This publication, or parts thereof,
More informationAutodesk MatchMover Release Notes
Autodesk MatchMover 2010 Release Notes Copyright Notice Autodesk Maya 2010 Software 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts
More informationAutoSketch Create and Trim Entities
AutoSketch 10 Create and Trim Entities September 2008 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationInternational Keyboard Reference Guide
Autodesk Smoke 2011 A Discreet Systems product For Mac OS X International Keyboard Reference Guide Autodesk Visual Effects and Finishing 2011 2010 Autodesk, Inc. All rights reserved. Except as otherwise
More informationChapter 1 Product Readme... 1
Contents Chapter 1 Product Readme.......................... 1 Installing Autodesk Navisworks...................... 1 Customer Involvement Program...................... 1 Product Notes................................
More informationAutodesk Cleaner XL Network Encoding Troubleshooting Guide AUTODESK EFFECTS AND EDITING 2007
Autodesk Cleaner XL Network Encoding Troubleshooting Guide AUTODESK EFFECTS AND EDITING 2007 Autodesk Cleaner XL Network Encoding Troubleshooting Guide 2006 Autodesk Canada Co./Autodesk, Inc. and/or its
More informationAutodesk Simulation Moldflow Communicator System Requirements
Autodesk Simulation Moldflow Communicator 2014 System Requirements 01-28-2013 Autodesk Simulation Moldflow Communicator 2013 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk,
More informationAutodesk Softimage 2010
Autodesk Softimage 2010 Graphics Hardware Qualification Linux Platform Last updated: September 15, 2009. Contents Readme First What s New Important Notes Linux Qualification Kernels Kernel Caveats & Limitations
More informationMaya Help Installation
Maya Help Installation Autodesk Maya 2012 2011Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form,
More informationInstalling and Licensing Softimage on Linux. For Linux 32-bit and 64-bit systems using SPM
Installing and Licensing Softimage on Linux For Linux 32-bit and 64-bit systems using SPM Copyright and Disclaimer 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc.,
More informationTransitioning from Autodesk Inventor 2008 Autodesk Official Training Courseware (AOTC) Autodesk Inventor. 527A CM00A April 2008
Transitioning from Autodesk Inventor 2008 Autodesk Official Training Courseware (AOTC) Autodesk Inventor 2009 527A1-050000-CM00A April 2008 2008 Autodesk, Inc. All rights reserved. Except as otherwise
More informationAutodesk 3ds Max 2019
Graphics Hardware Certification Microsoft Windows Platform Last updated: August 31 st 2018. Contents Readme First What s New Important Notes Professional Graphics Cards Professional Graphics Cards Caveats
More informationAutoCAD Network Administrator s Guide
AutoCAD 2008 Network Administrator s Guide January 2007 Copyright 2007 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.
More informationAutodesk Moldflow Insight Web Services System Requirements for Autodesk Moldflow Insight WS
Autodesk Moldflow Insight Web Services 2012 System Requirements for Autodesk Moldflow Insight WS Revision 01, 25 August 2011. Autodesk Moldflow Insight Web Services 2011 Autodesk, Inc. All rights reserved.
More informationAUTODESK INVENTOR 11. 3D Curves, Sketches, and Construction Geometry. Autodesk Training Courseware (AOTC)
AUTODESK INVENTOR 11 3D Curves, Sketches, and Construction Geometry Official Autodesk Training Courseware (AOTC) 52711-050008-1750A June 2006 Copyright 2006 Autodesk, Inc. All rights reserved. This publication,
More informationCopyright Notice Autodesk Maya 2010 Software 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc.
What s New Copyright Notice Autodesk Maya 2010 Software 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationAutoCAD Map 3D Citrix-Ready AutoCAD Map 3D Installation and Setup Guide
AutoCAD Map 3D 2010 Citrix-Ready AutoCAD Map 3D Installation and Setup Guide April 2009 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts
More informationAUTODESK INVENTOR 11. Complex Shape Design. Autodesk Training Courseware (AOTC)
AUTODESK INVENTOR 11 Complex Shape Design Official Autodesk Training Courseware (AOTC) 52711-050008-1730A May 2006 Copyright 2006 Autodesk, Inc. All rights reserved. This publication, or parts thereof,
More informationWorkstations & Mobile Workstations Certification
Workstations & Mobile Workstations Certification Microsoft Platform Last updated: December 3 rd 2010. Contents Readme First What s New Important Notes Processor Support Workstations Readme First The information
More informationAutodesk Moldflow Insight Web Services Licensing Guide
Autodesk Moldflow Insight Web Services 2012 Licensing Guide Revision 01, 17 August 2011. Autodesk Moldflow Insight Web Services 2011 Autodesk, Inc. All rights reserved. Except as otherwise permitted by
More informationInstallation Guide. For Linux Systems
Installation Guide For Linux Systems Copyright and Disclaimer 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationWorkstations & Mobile Workstations Certification
Autodesk MotionBuilder 2011 & Subscription Advantage Pack Workstations & Mobile Workstations Certification Microsoft Platform Contents Readme First What s New Important Notes Processor Support Workstations
More informationAutoCAD Map 3D Workflow Guide
AutoCAD Map 3D 2008 Workflow Guide April 2007 Copyright 2007 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK,
More informationAutodesk Inventor Advanced Assembly and Machine Design Autodesk Official Training Courseware (AOTC)
Autodesk Inventor 2008 Advanced Assembly and Machine Design Autodesk Official Training Courseware (AOTC) 52712-050008-1725A September 2007 Copyright 2007 Autodesk, Inc. All rights reserved. Except as otherwise
More informationAutodesk Maya Graphics Hardware Qualification for Stereo Support. Windows Platform. Readme First. Note. Last updated: April 23th 2010.
Graphics Hardware Qualification for Stereo Support Windows Platform Last updated: April 23th 2010. Contents Readme First What s New Graphics Cards Setup and Tested Displays Graphics Cards Caveats &Limitations
More informationAutoCAD 2011 for Mac Update 3 Readme
AutoCAD 2011 for Mac Update 3 Readme 1 This Readme contains important information about AutoCAD 2011 for Mac Update 3. It is strongly recommended that you read this entire document before you apply this
More informationInstallation Guide. For Linux Systems
Installation Guide For Linux Systems Copyright and Disclaimer 2010 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationAutodesk Topobase Electric User Guide. Autodesk Topobase Electric User Guide
Autodesk Topobase Electric User Guide Autodesk Topobase Electric User Guide 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof,
More informationAutodesk Simulation Moldflow Communicator What's New in this Release
Autodesk Simulation Moldflow Communicator 2013 What's New in this Release Revision 2, 06 February 2012. Autodesk Simulation Moldflow Communicator 2012 Autodesk, Inc. All rights reserved. Except as otherwise
More informationAutodesk Maya. Foundation. Learning Autodesk Maya. Autodesk Official Training Guide
Autodesk Official Training Guide Foundation Autodesk Maya 2010 Learning Autodesk Maya 2010 A hands-on introduction to key tools and techniques in Autodesk Maya 2010 software, based on the Yash Raj Films
More informationAutodesk Maya. Intermediate. The Modeling & Animation Handbook. Autodesk Official Training Guide
Autodesk Official Training Guide Intermediate Autodesk Maya 2010 The Modeling & Animation Handbook A hands-on introduction to key tools and techniques in Autodesk Maya 2010 software, based on the Yash
More informationAutodesk Simulation Moldflow Insight System Requirements 575E E
Autodesk Simulation Moldflow Insight 2013 System Requirements 575E1-059808-9931E Revision 2, 13 March 2012. Autodesk Simulation Moldflow Insight 2012 Autodesk, Inc. All rights reserved. Except as otherwise
More informationAutodesk Softimage 2012 Subscription Advantage Pack. Workstations & Mobile Workstations Certification. Microsoft Windows Platform.
Autodesk Softimage 2012 Subscription Advantage Pack s & Mobile s Certification Microsoft Platform Contents Readme First What s New Important Notes Processor Support s Caveats and Limitations Mobile s Mobile
More informationAutodesk Smoke Graphics Hardware Certification. Apple Macintosh Platform. Readme First. What s New. Last updated: September 25 th 2011.
Contents Readme First What s New Tested Mac OS Versions Workstation and Mobile Workstations Hardware System Certification Graphics Cards and Drivers Professional Graphics Cards Dual Monitor Support Professional
More informationWhat's New in this Release
Autodesk Simulation Moldflow Adviser 2013 What's New in this Release 572E1-053059-1834E Revision 12, 13 March 2012. Autodesk Simulation Moldflow Adviser 2011 Autodesk, Inc. All rights reserved. Except
More informationGraphics Hardware Certification
Autodesk Mudbox 2011 Subscription Advantage Pack Graphics Hardware Certification Linux Platform Last updated: October 1 st 2010. Contents Readme First What s New Important Notes Professional Graphics Cards
More informationRevit Architecture 2010 Families Guide. Metric Tutorials
Revit Architecture 2010 Families Guide Metric Tutorials June 2009 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
More informationAutodesk Mudbox Workstations & Mobile Workstations Certification. Microsoft Windows Platform. Readme First. What s New
Autodesk Mudbox 2012 s & Mobile s Certification Microsoft Windows Platform Last updated: October 27 th 2011. Contents Readme First What s New Important Notes Processor Support s Caveats and Limitations
More informationSketchBook Designer. Tips & Workflows
SketchBook Designer Tips & Workflows Scope This document covers some typical workflows possible in SketchBook Designer 2012. This document is not intended to describe all tools and workflows available
More informationAutodesk FBX for QuickTime Help
Autodesk FBX for QuickTime Help Contents Chapter 1 Autodesk FBX for QuickTime Help................. 1 Copyright.................................. 1 Chapter 2 FBX for QuickTime.........................
More informationChapter 1 Product Readme... 1
Contents Chapter 1 Product Readme.......................... 1 Installing Autodesk Navisworks...................... 1 Customer Involvement Program...................... 1 Customer Involvement Program...................
More informationAutodesk DirectConnect Installation Guide
Autodesk DirectConnect 2012 Installation Guide 2011 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any
More information3D Text Presets Reference Guide. Autodesk Inferno 2010 Extension 1 A Discreet Systems product
Autodesk Inferno 2010 Extension 1 A Discreet Systems product Autodesk Flame 2010 Extension 1 A Discreet Systems product Autodesk Flare 2010 Extension 1 Autodesk Flint 2010 Extension 1 A Discreet Systems
More informationAutodesk 3ds Max 2010 Autodesk 3ds Max Design Installation Guide
Autodesk 3ds Max 2010 Autodesk 3ds Max Design 2010 Installation Guide Autodesk 3ds Max 2010 Software 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication,
More informationAutodesk. Network Licensing Guide
Autodesk Network Licensing Guide January 2007 Copyright 2007 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK,
More informationAutodesk Vault Professional 2015 R2
Essentials Autodesk Vault Professional 2015 R2 Learning Autodesk Vault Professional 2015 R2 Using hands-on exercises, learn how to organize and share files, manage file versions, work in multi-user environments,
More informationAutodesk Backdraft Conform 2007 What s New AUTODESK BACKDRAFT CONFORM What s New
Autodesk Backdraft Conform 2007 What s New AUTODESK BACKDRAFT CONFORM 2007 What s New 2006 Autodesk Canada Co./Autodesk, Inc. and/or its licensors All rights reserved. All user documentation ("User Documentation")
More informationAutoCAD LT Stand-Alone Installation Guide
AutoCAD LT 2010 Stand-Alone Installation Guide January 2009 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationInstallation Guide. For Windows Systems
Installation Guide For Windows Systems Copyright and Disclaimer 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
More informationAutodesk Maya 2012 Subscription Advantage Pack
Autodesk Maya 2012 Subscription Advantage Pack Graphics Hardware Certification Contents Readme First What s New Tested Mac OS Versions Workstation and Mobile Workstations Hardware System Certification
More informationInstallation Overview and FAQ
Installation Overview and FAQ Autodesk Mudbox 2012 2011 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in
More informationGetting Started with Maya Unlimited
Getting Started with Maya Unlimited Legal Notice Autodesk Maya 2008 2007 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not
More informationService Pack 1 Release Notes
Service Pack 1 Release Notes Copyright Notice 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any
More informationSoftware Installation Guide for Windows Workstations
AUTODESK LUSTRE 2008 A Discreet Systems product Software Installation Guide for Windows Workstations 2007 Autodesk Canada Co./Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk
More informationAutodesk Visual Effects and Finishing 2010 Extension 1 Edition. Autodesk Developer Network Sparks API Reference Guide
Autodesk Visual Effects and Finishing 2010 Extension 1 Edition Autodesk Developer Network Sparks API Reference Guide Autodesk Visual Effects and Finishing 2010 Extension 1 2009 Autodesk, Inc. All rights
More informationAutodesk Design Review User s Guide
Autodesk Design Review 2011 User s Guide January 2010 2010 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationAutodesk SystemCentral User Guide
Autodesk SystemCentral 2011 User Guide Autodesk Visual Effects, Finishing and Color Grading 2011 2010 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication,
More information2003 Autodesk Canada Inc./Autodesk, Inc. All Rights Reserved.
from discreet November 000 003 Autodesk Canada Inc./Autodesk, Inc. All Rights Reserved. This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK CANADA
More informationAutodesk Design Review Quick Reference Guide
Autodesk Design Review 2011 Quick Reference Guide January 2010 2010 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationAutodesk SystemCentral User Guide
Autodesk SystemCentral 2010 User Guide 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by
More informationAutodesk Mudbox Autodesk, Inc. All Rights Reserved. Trademarks Disclaimer
Installation Help Autodesk Mudbox 2013 2012 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by
More informationAutodesk Navisworks Freedom User Guide
Autodesk Navisworks Freedom 2010 User Guide March 2009 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationAutodesk Visual Effects and Finishing 2010 Edition. Using Autodesk Cleaner XL with Autodesk Visual Effects and Finishing 2010 Applications
Autodesk Visual Effects and Finishing 2010 Edition Using Autodesk Cleaner XL with Autodesk Visual Effects and Finishing 2010 Applications 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted
More informationInstallation Guide. Autodesk Showcase 2009 March 2008 Release
Installation Guide Autodesk Showcase 2009 March 2008 Release 2 AUTODESK SHOWCASE 2009 INSTALLATION GUIDE Table of Contents About this release 5 What s new this release 5 Release notes 5 Opening and importing
More informationAutodesk Stone Direct 2007 Configuration Guide AUTODESK STONE DIRECT Configuration Guide
Autodesk Stone Direct 2007 Configuration Guide AUTODESK STONE DIRECT 2007 Configuration Guide 2007 Autodesk Canada Co./Autodesk, Inc. All Rights Reserved. This publication, or parts thereof, may not be
More informationInstallation and User s Guide
Autodesk Incinerator 2007 Installation and User s Guide AUTODESK INCINERATOR 2007 Installation and User s Guide 2007 Autodesk Canada Co./Autodesk, Inc. All Rights Reserved. Disclaimer This publication,
More informationAutodesk AliasStudio Data Transfer in AliasStudio
Autodesk AliasStudio 2009 Data Transfer in AliasStudio March 2008 2008 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
More informationInstallation Guide Autodesk March 2010
Installation Guide Autodesk March 2010 2010 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by
More informationAutodesk VIZ Essentials Autodesk Authorized Training Courseware (AATC)
Autodesk VIZ 2008 Essentials Autodesk Authorized Training Courseware (AATC) 27009-050008-1700A May 2007 Copyright ASCENT Center for Technical Knowledge, 2007 Printed in the United States of America, all
More informationInstallation and Configuration Guide
Autodesk Smoke 2012 A Discreet Systems product For Mac OS X Installation and Configuration Guide Autodesk Flame 2012, Autodesk Flame Premium 2012, Autodesk Flare 2012, Autodesk Lustre 2012, Autodesk Smoke
More informationAutodesk Maya Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may
Autodesk Maya 2013 2012 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any
More informationInstallation, Configuration, and Hardware. Before you use AutoCAD, you should be aware of the following installation and hardware limitations.
AutoCAD 2013 Readme 1 This Readme contains important information about AutoCAD for Mac that may not be included in Help. Installation, Configuration, and Hardware Before you use AutoCAD, you should be
More informationAutodesk Incinerator Installation and User Guide
Autodesk Incinerator 2009 Installation and User Guide 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationWhat s new in AliasStudio 2009
What s new in AliasStudio 2009 March 2008 2008 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form,
More informationAutodesk Visual Effects and Finishing 2010 Edition. Autodesk Developer Network Sparks API Reference Guide
Autodesk Visual Effects and Finishing 2010 Edition Autodesk Developer Network Sparks API Reference Guide 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication,
More informationTutorials: Autodesk MotionBuilder Interoperability 2010
Tutorials: Autodesk MotionBuilder Interoperability 2010 Autodesk 3ds Max 2010 Software 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts
More informationEdit the Document Title Variable. AUTODESK TOXIK 2009 Linux. Installation Guide
Edit the Document Title Variable AUTODESK TOXIK 2009 Linux Installation Guide 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof,
More informationQuestions & Answers. Contents AUTODESK ARCHITECTURAL DESKTOP 2006
AUTODESK ARCHITECTURAL DESKTOP 2006 With Autodesk Architectural Desktop you get flexibility in both implementation and use, the efficiency of real-world building objects, and the very best AutoCAD -based
More informationContents. Autodesk AliasStudio Transition Guide for users of Rhino software. Resources ii
Contents 1 Autodesk AliasStudio 2009 Transition Guide for users of Rhino software Resources ii Understanding the tools 1 Curves 2 Editing surves 4 Creating surfaces 6 Editing surfaces 8 Evaluating surfaces
More informationSample provided by ASCENT for review only. All copying and reuse strictly forbidden. Essentials. CADdoctor Autodesk Simulation 2015 Manual
Autodesk Official Training Guide Essentials CADdoctor Autodesk Simulation 2015 Manual The exercises in this practice manual demonstrate features of CADdoctor Autodesk Simulation. July 2014 2014 Autodesk,
More informationWhat's New in this Release
Autodesk Simulation Moldflow Insight 2013 What's New in this Release 575E1-054981-3300E Revision 12, 13 March 2012. Autodesk Simulation Moldflow Insight 2012 Autodesk, Inc. All rights reserved. Except
More informationAutodesk Simulation Moldflow Insight Installation Guide 575E E
Autodesk Simulation Moldflow Insight 2013 Installation Guide 575E1-057650-8904E Revision 7, 13 March 2012. Autodesk Simulation Moldflow Insight 2012 Autodesk, Inc. All rights reserved. Except as otherwise
More informationAutodesk DirectConnect 2010 R1. Autodesk DirectConnect
Autodesk DirectConnect 2010 R1 Autodesk DirectConnect 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationSOFTIMAGE XSI. Version 7.5. Particles
SOFTIMAGE XSI Version 7.5 Particles Copyright and Disclaimer 2009 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More informationDigging Into Autodesk Map 3D 2005 Level 1 Training Rick Ellis Michael Carris Russell Martin
Digging Into Autodesk Map 3D 2005 Level 1 Training Rick Ellis Michael Carris Russell Martin PO Box 344 Canby Oregon 97013 www.cadapult-software.com training@cadapult-software.com (503) 829-8929 Copyright
More informationAutodesk Topobase. Developer s Guide
Autodesk Topobase Autodesk Topobase Developer s Guide 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced
More information