ETERNUS Disk storage systems Server Connection Guide (FCoE) for Linux
|
|
|
- Cory Hood
- 5 years ago
- Views:
Transcription
1
2
3 Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a server running SUSE Linux Enterprise Server and using Emulex Converged Network Adapter cards via an FCoE interface. This document should be used in conjunction with any other applicable user manuals, such as those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server, OS used, Converged Network Adapter cards, drivers, etc. Note that this manual refers the following documents. Server Support Matrix Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000 models 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100, and 2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems. First Edition December 2010 The Contents and Structure of this Manual This document is composed of the following three chapters. Chapter 1 Workflow This describes the workflow for installing and setting up Converged Network Adapter cards and the server. Chapter 2 For SUSE Linux Enterprise Server 11 This describes how to install and set up the Converged Network Adapter cards and server when running SUSE Linux Enterprise Server 11. Chapter 3 For SUSE Linux Enterprise Server 10 This describes how to install and set up the Converged Network Adapter cards and server when running SUSE Linux Enterprise Server 10. 3
4 Preface Safe Use of this Product Using this manual This manual contains important information to ensure the safe use of this product. Be sure to thoroughly read and understand its contents before using the product. After reading, store this manual in a safe place for future reference. FUJITSU has made every effort to ensure the safety of the users and other personnel, and to prevent property damage. When using this product, carefully follow the instructions described in this manual. Acknowledgments Emulex is a trademark of Emulex Corp. Linux is a trademark or registered trademark of Linus Torvalds in the USA and other countries. SUSE is a registered trademark of SUSE Linux AG., a subsidiary of Novell, Inc. The company names, product names and service names mentioned in this document are registered trademarks or trademarks of their respective companies. Naming Conventions Product Names SUSE Linux Enterprise Server series products are as described below. "xxx" in the following table indicates an architecture name (example: x86), and "x" indicates a version number. Product names SUSE Linux Enterprise Server SUSE Linux Enterprise Server 11 SUSE Linux Enterprise Server 11 Service Packx SUSE Linux Enterprise Server 11 for xxx SUSE Linux Enterprise Server 11 Service Packx for xxx SUSE Linux Enterprise Server 10 SUSE Linux Enterprise Server 10 Service Packx SUSE Linux Enterprise Server 10 for xxx SUSE Linux Enterprise Server 10 Service Packx for xxx Abbreviation SLES SLES11 SLES11 SPx SLES11 (xxx) SLES11 SPx (xxx) SLES10 SLES10 SPx SLES10 (xxx) SLES10 SPx (xxx) 4
5 Preface Other names "Channel Adapter" (CA) refers to the Fibre Channel interface module used in the ETERNUS Disk storage systems to connect to the server. "Converged Network Adapter card" refers to the FCoE interface module normally used in the server. Italics are used to show variables such as values and characters that appear in command parameters and output examples. 5
6 Contents Chapter 1 Workflow...7 Chapter 2 For SUSE Linux Enterprise Server Installing the Converged Network Adapter Card Driver Setting the Driver Parameters Creating an Initial RAM Disk Rebooting the OS Chapter 3 For SUSE Linux Enterprise Server Installing the Converged Network Adapter Card Driver Setting the Driver Parameters Creating an Initial RAM Disk Rebooting the OS
7 Chapter 1 Workflow This manual is used when performing the setup procedure described in "Installing and Setting Up the Drivers" of the "ETERNUS Disk storage systems Server Connection Guide (FCoE) for Linux". This manual provides a different chapter for each OS version. Refer to the chapter appropriate for the OS being used. Workflow Install the Emulex Converged Network Adapter Card Driver Install the specified Converged Network Adapter card driver. Download the proper driver from the Emulex Corp web-site if required. Refer - For SLES11 "2.1 Installing the Converged Network Adapter Card Driver" (page 9) - For SLES10 "3.1 Installing the Converged Network Adapter Card Driver" (page 12) Set Up the Driver Parameters Set the driver parameters by editing the configuration file. Refer - For SLES11 "2.2 Setting the Driver Parameters" (page 9) - For SLES10 "3.2 Setting the Driver Parameters" (page 12) 7
8 Chapter 1 Workflow > Create an Initial RAM Disk Create an initial RAM disk to match the kernel being used. Refer - For SLES11 "2.3 Creating an Initial RAM Disk" (page 10) - For SLES10 "3.3 Creating an Initial RAM Disk" (page 13) After completing all the required procedures in this manual, follow the procedures in "". 8
9 Chapter 2 For SUSE Linux Enterprise Server 11 All work after this point requires "root" privileges. When using SUSE Linux Enterprise Server 11 (SLES11) supported Converged Network Adapter cards, this procedure is used for all OS architectures (e.g. x86, Intel64), Converged Network Adapter cards, and driver versions. 2.1 Installing the Converged Network Adapter Card Driver Check whether the Converged Network Adapter card driver is the OS standard driver or not. If the Converged Network Adapter card requires a non-standard driver, check the driver versions using the "Server Support Matrix". When the Converged Network Adapter card requires a standard kernel package driver The standard add-on driver for the OS should be used. When the Converged Network Adapter card requires a non-standard driver Download and install the driver specified in the "Server Support Matrix" from the Emulex Corp web-site. Installation of applications, such as OneCommand Manager, is also required. Refer to the Emulex Converged Network Adapter card manual for details of the installation method. 2.2 Setting the Driver Parameters Open the "/etc/modprobe.conf.local" file in an editor such as "vi", and add the setting values for each driver. Note that the setting values and items vary depending on the ETERNUS Disk storage system that is used. Example options scsi_mod max_luns=512 options lpfc lpfc_lun_queue_depth=n lpfc_link_speed=n lpfc_topology=n 9
10 Chapter 2 For SUSE Linux Enterprise Server 11 > 2.3 Creating an Initial RAM Disk Driver parameter ETERNUS2000 ETERNUS4000 ETERNUS8000 scsi_mod max_luns= lpfc_lun_queue_depth= Set "8" when the number of LUN is 16 or less. Set "4" when the number of LUN is 17 or more lpfc_link_speed= 10 lpfc_topology= Creating an Initial RAM Disk Create an initial RAM disk file to match the kernel being used. Perform the following procedure. Procedure 1 Use the following command to check which kernel is being used. # uname -r 2 Backup the existing initial RAM disk file, then create a new initial RAM disk file. Example: For a single CPU server or a multiple CPU server # cp /boot/initrd default /boot/initrd default.bak # /sbin/mkinitrd -k vmlinuz -i /boot/initrd default_new New initial RAM disk file name Confirm that an initial RAM disk file is created in /boot. 3 Set the boot loader. Edit "/boot/grub/menu.lst" with an editor such as "vi". Comment out the previous initial RAM disk file and add the new initial RAM disk file. Example # initrd /initrd default initrd /initrd default_new End of procedure 10
11 Chapter 2 For SUSE Linux Enterprise Server 11 > 2.4 Rebooting the OS 2.4 Rebooting the OS Reboot the OS. When the Converged Network Adapter card requires a non-standard driver, check the files in "/var/log/messages" and confirm that the correct version of the Converged Network Adapter card driver has been installed after restarting the OS. 11
12 Chapter 3 For SUSE Linux Enterprise Server 10 All work after this point requires "root" privileges. When using SUSE Linux Enterprise Server 10 (SLES10) supported Converged Network Adapter cards, this procedure is used for all OS architectures (e.g. x86, Intel64), Converged Network Adapter cards, and driver versions. 3.1 Installing the Converged Network Adapter Card Driver Check whether the Converged Network Adapter card driver is the OS standard driver or not. If the Converged Network Adapter card requires a non-standard driver, check the driver versions using the "Server Support Matrix". When the Converged Network Adapter card requires a standard kernel package driver The standard add-on driver for the OS should be used. When the Converged Network Adapter card requires a non-standard driver Download and install the driver specified in the "Server Support Matrix" from the Emulex Corp web-site. Installation of applications, such as OneCommand Manager, is also required. Refer to the Emulex Converged Network Adapter card manual for details of the installation method. 3.2 Setting the Driver Parameters Open the "/etc/modprobe.conf.local" file in an editor such as "vi", and add the setting values for each driver. Note that the setting values and items vary depending on whether the ETERNUS Multipath Driver is used and the ETERNUS Disk storage system that is used. When the ETERNUS Multipath Driver is used options scsi_mod max_luns=512 When the ETERNUS Multipath Driver is not used options scsi_mod max_luns=512 options lpfc lpfc_lun_queue_depth=n lpfc_link_speed=n lpfc_topology=n 12
13 Chapter 3 For SUSE Linux Enterprise Server 10 > 3.3 Creating an Initial RAM Disk Driver parameter When the ETERNUS Multipath Driver is used ETERNUS2000 ETERNUS4000 ETERNUS8000 When the ETERNUS Multipath Driver is not used ETERNUS 2000 ETERNUS 4000 ETERNUS 8000 scsi_mod max_luns= lpfc_lun_queue_depth= No setting is required Set "8" when the number of LUN is 16 or less. Set "4" when the number of LUN is 17 or more. lpfc_link_speed= No setting is required 10 lpfc_topology= No setting is required Creating an Initial RAM Disk Create an initial RAM disk file to match the kernel being used. Perform the following procedure. Procedure 1 Use the following command to check which kernel is being used. # uname -r 2 Backup the existing initial RAM disk file, then create a new initial RAM disk file. Image file name varies depending on whether the server has a single or multiple CPUs. Example: For a single CPU server # cp /boot/initrd /boot/initrd bak # /sbin/mkinitrd -k vmlinuz -i /boot/initrd _new New initial RAM disk file name Example: For a multiple CPU server # cp /boot/initrd smp /boot/initrd smp.bak # /sbin/mkinitrd -k vmlinuz -i /boot/initrd _new-smp New initial RAM disk file name Confirm that an initial RAM disk file is created in /boot. 13
14 Chapter 3 For SUSE Linux Enterprise Server 10 > 3.4 Rebooting the OS 3 Set the boot loader. Edit "/boot/grub/menu.lst" with an editor such as "vi". Comment out the previous initial RAM disk file and add the new initial RAM disk file. Example # initrd /initrd initrd /initrd _new End of procedure 3.4 Rebooting the OS Reboot the OS. When the Converged Network Adapter card requires a non-standard driver, check the files in "/var/log/messages" and confirm that the correct version of the Converged Network Adapter card driver has been installed after restarting the OS. 14
15 ETERNUS Disk storage systems Server Connection Guide (FCoE) for Linux Driver Settings for SUSE Linux Enterprise Server on Other Brand Servers with Emulex Converged Network Adapter Cards Date of issuance: December 2010 Issuance responsibility: FUJITSU LIMITED The contents of this manual are liable to being updated without notice. While the contents of this manual are the product of all due care and diligence, no responsibility can be accepted for operational problems arising from any errors or missing information, or other use of the information contained in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual. Contents of this manual are not to be reproduced without permission from Fujitsu.
16
ETERNUS Disk storage systems Server Connection Guide (FCoE) for Linux
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following three chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Linux
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
ETERNUS Disk storage systems Server Connection Guide (FCoE) for Linux
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
Server Support Matrix ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS Disk Storage System Settings
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
Server Support Matrix ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS Disk Storage System Settings
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following six chapters and an appendix.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following two chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200 Disk storage system to a server running Solaris, HP-UX, Windows,
The Contents and Structure of this Manual. This document is composed of the following two chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000 model 700, 800, 900, 1100, 1200,
The Contents and Structure of this Manual. This document is composed of the following four chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for VMware ESX
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for VMware ESX
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following three chapters and an appendix.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following four chapters and an appendix.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following 12 chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
Server Support Matrix ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Oracle Solaris
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
The Contents and Structure of this Manual. This document is composed of the following ten chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for VMware ESX This page is intentionally left blank. Preface This manual briefly explains the operations that need to be performed
This guide consists of the following two chapters and an appendix. Chapter 1 Installing ETERNUSmgr This chapter describes how to install ETERNUSmgr.
Preface This installation guide explains how to install the "ETERNUSmgr for Linux" storage system management software on an ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000,
Emulex Drivers for Linux for LightPulse Adapters Release Notes
Emulex Drivers for Linux for LightPulse Adapters Release Notes Versions: FC Version 11.4.142.21 Date: September 6, 2017 Purpose and Contact Information These release notes describe the new features, current
Server Support Matrix ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Oracle Solaris
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix XenServer This page is intentionally left blank. Preface This manual briefly explains the operations
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iscsi) ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays Settings This page
The Contents and Structure of this Manual. This document is composed of the following six chapters and three appendices.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Citrix XenServer This page is intentionally left blank. Preface This manual briefly explains the operations that need to be
The Contents and Structure of this Manual. This document is composed of the following 12 chapters.
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
Notes on Using Red Hat Enterprise Linux AS (v.3 for x86)
2005-09-01 Notes on Using Red Hat Enterprise Linux AS (v.3 for x86) Preface About This Manual This manual provides notes on PRIMERGY operation with Linux installed. Be sure to read this manual before using
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.2.1 release notes
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.2.1 release notes Part number: AA-RWF9H-TE First edition: March 2009 Legal and notice information Copyright 2009 Hewlett-Packard
QLogic QLA4010/QLA4010C/QLA4050/QLA4050C/ QLA4052C/QMC4052/QLE4060C/QLE4062C iscsi Driver for Linux Kernel 2.6.x.
QLogic QLA4010/QLA4010C/QLA4050/QLA4050C/ QLA4052C/QMC4052/QLE4060C/QLE4062C iscsi Driver for Linux Kernel 2.6.x This software license applies only to QLogic customers. QLogic Corporation. All rights reserved.
FUJITSU Storage ETERNUS SF Storage Cruiser V16.3 / AdvancedCopy Manager V16.3. Cluster Environment Setup Guide
FUJITSU Storage ETERNUS SF Storage Cruiser V16.3 / AdvancedCopy Manager V16.3 Cluster Environment Setup Guide B1FW-6006-04ENZ0(00) October 2015 Preface Purpose This manual provides information on installation
Server Support Matrix ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Oracle Solaris
Preface This document briefly explains the operations that need to be performed by the user in order to connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000
FUJITSU Storage ETERNUS Multipath Driver V2 (for Linux) Installation Information
FUJITSU Storage ETERNUS Multipath Driver V2 (for Linux) Installation Information Mar 2015 Contents Correspondence of ETERNUS Multipath Driver 's Version Level and Patch... 0 Multipath Driver's Version
P3AM ENZ0. FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems. Operation Guide (Basic)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic) This page is intentionally left blank. Preface Fujitsu would like to thank you for purchasing
Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Windows This page is intentionally left blank. Preface This manual briefly explains the operations that
Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Windows This page is intentionally left blank. Preface This manual briefly explains the operations that
FC-FCoE Adapter Inbox Driver Update for Linux Kernel 2.6.x. Table of Contents
FC-FCoE Adapter Inbox Driver Update for Linux Kernel 2.6.x QLogic Corporation. All rights reserved. Table of Contents 1. Package Contents 2. OS Support 3. Supported Features 4. Deploying the Driver 4.1
ExpressCluster X 2.0 for Linux
ExpressCluster X 2.0 for Linux Installation and Configuration Guide 03/31/2009 3rd Edition Revision History Edition Revised Date Description First 2008/04/25 New manual Second 2008/10/15 This manual has
Notes on Using Red Hat Enterprise Linux AS (v.4 for EM64T)
2005-09-01 Notes on Using Red Hat Enterprise Linux AS (v.4 for EM64T) Preface About This Manual This manual provides notes on PRIMERGY operation with Linux installed. Be sure to read this manual before
ETERNUS Veritas Operations Manager Storage Insight Plug-in 1.0 User s Guide P2X ENZ0
ETERNUS Veritas Operations Manager Storage Insight Plug-in 1.0 User s Guide This page is intentionally left blank. Preface This manual explains how to use and operate the ETERNUS Veritas Operations Manager
Integrated Mirroring SAS User s Guide for Windows Server 2008
CA97232-0006-01EN Integrated Mirroring SAS User s Guide for Windows Server 2008 1 / 8 Contents Before reading this manual...3 Product Names (page 3)...3 3.1 Updating Device Driver (page 50)...4 Updating
FUJITSU Software ServerView Infrastructure Manager V2.1. Start Guide
FUJITSU Software ServerView Infrastructure Manager V2.1 Start Guide CA92344-1717-02 August 2017 Preface Purpose This manual describes overviews of the functions and installation procedures, and describes
FUJITSU Storage ETERNUS SF Storage Cruiser V16.5 / AdvancedCopy Manager V16.5. Cluster Environment Setup Guide
FUJITSU Storage ETERNUS SF Storage Cruiser V16.5 / AdvancedCopy Manager V16.5 Cluster Environment Setup Guide B1FW-6006-06ENZ0(00) May 2017 Preface Purpose This manual provides information on installation
ETERNUS SF Express V15.3/ Storage Cruiser V15.3/ AdvancedCopy Manager V15.3. Migration Guide
ETERNUS SF Express V15.3/ Storage Cruiser V15.3/ AdvancedCopy Manager V15.3 Migration Guide B1FW-5958-06ENZ0(00) June 2013 Preface Purpose This manual describes how to upgrade to this version from the
iscsi Adapter Inbox Driver Update for Linux Kernel 2.6.x Table of Contents
iscsi Adapter Inbox Driver Update for Linux Kernel 2.6.x QLogic Corporation All rights reserved Table of Contents 1 Package Contents 2 OS Support 3 Supported Features 4 Using the iscsi Adapter Driver for
ETERNUS VAAI Plug-in for VMware vsphere User s Guide
ETERNUS VAAI Plug-in for VMware vsphere5 1.0.0 User s Guide Preface This document provides an overview of ETERNUS VAAI Plug-in for VMware vsphere5 and discribes how to use it. The Structure of this Document
ETERNUS Multipath Driver (Windows Version) Installation Information
(Windows Version) Installation Information September 2011 Contents About for Windows...4 Supported Operation System (OS) Versions...5 Supported Disk Storage Systems...6 ETERNUS DX60, ETERNUS DX80, ETERNUS
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.4.1 release notes
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.4.1 release notes April 2010 H Legal and notice information Copyright 2009-2010 Hewlett-Packard Development Company, L.P. Overview
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.4.0 release notes
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.4.0 release notes Part number: AA-RWF9K-TE First edition: February 2010 Legal and notice information Copyright 2009-2010 Hewlett-Packard
FUJITSU Storage ETERNUS SF Express V16.3 / Storage Cruiser V16.3 / AdvancedCopy Manager V16.3. Migration Guide
FUJITSU Storage ETERNUS SF Express V16.3 / Storage Cruiser V16.3 / AdvancedCopy Manager V16.3 Migration Guide B1FW-6000-04ENZ0(00) October 2015 Preface Purpose This manual describes how to upgrade to this
Fibre Channel Adapter and Converged Network Adapter Inbox Driver Update for Linux Kernel 2.6.x and 3.x. Readme. QLogic Corporation All rights reserved
Fibre Channel Adapter and Converged Network Adapter Inbox Driver Update for Linux Kernel 2.6.x and 3.x Readme QLogic Corporation All rights reserved Table of Contents 1. Package Contents 2. OS Support
Configuration Guide -Server Connection-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for VMware ESX This page is intentionally left blank. Preface This manual briefly explains the operations
FUJITSU Storage ETERNUS Multipath Driver (Windows Version) Installation Information
FUJITSU Storage ETERNUS Multipath Driver (Windows Version) Installation Information Jul 2015 Contents About ETERNUS Multipath Driver for Windows... 4 Supported Operation System (OS) Versions... 5 Supported
Hitachi Block Storage Driver for OpenStack v Release Notes
Hitachi Block Storage Driver for OpenStack v01.5.3 Release Notes Hitachi Block Storage Driver for OpenStack v01.5.3 Release Notes... 1 About this document... 1 Intended audience... 1 Getting help... 1
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes Part number: AA-RWF7N-TE Thirteenth edition: April 2009
HP StorageWorks 4000/6000/8000 Enterprise Virtual Array connectivity for Sun Solaris installation and reference guide
HP StorageWorks 4000/6000/8000 Enterprise Virtual Array connectivity for Sun Solaris installation and reference guide Part number: 5697-5263 First edition: May 2005 Legal and notice information Copyright
Hitachi Storage Adapter for SAP NetWeaver Landscape Virtualization Management v Release Notes
Hitachi Storage Adapter for SAP NetWeaver Landscape Virtualization Management v02.2.0 Release Notes About this document... 1 Intended audience... 1 Getting help... 1 Software and Hardware Support... 2
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes Part number: AA-RWF7J-TE Ninth edition: January 2009 Description
FUJITSU Storage ETERNUS Multipath Driver (Windows Version) Installation Information
FUJITSU Storage ETERNUS Multipath Driver (Windows Version) Installation Information Nov 2017 Contents About ETERNUS Multipath Driver for Windows... 4 Supported Operation System (OS) Versions... 5 Supported
ExpressCluster X 3.2 for Linux
ExpressCluster X 3.2 for Linux Installation and Configuration Guide 5/23/2014 2nd Edition Revision History Edition Revised Date Description 1st 2/19/2014 New manual 2nd 5/23/2014 Corresponds to the internal
Elxflash Offline/Online Utilities Release Notes
Elxflash Offline/Online Utilities Release Notes Versions: FreeBSD Elxflash Offline, Version 10.2.470.0 Linux ElxflashOffline Kit, Version 10.2.470.14 Linux ElxflashOffline for NIC-only Kit, Version 10.2.470.14
LifeKeeper for Linux 7.3. Linux Configuration
LifeKeeper for Linux 7.3 Linux Configuration January 2012 This document and the information herein is the property of SIOS Technology Corp. (previously known as SteelEye Technology, Inc.) and all unauthorized
FUJITSU Storage ETERNUS SF Express V16.5 / Storage Cruiser V16.5 / AdvancedCopy Manager V16.5. Migration Guide
FUJITSU Storage ETERNUS SF Express V16.5 / Storage Cruiser V16.5 / AdvancedCopy Manager V16.5 Migration Guide B1FW-6000-06ENZ0(01) June 2017 Preface Purpose This manual describes how to upgrade to this
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes Part number: AA-RWF7G-TE Seventh edition: August 2008 Description
Hitachi Block Storage Driver for OpenStack v Release Notes
Hitachi Block Storage Driver for OpenStack v01.5.2 Release Notes Hitachi Block Storage Driver for OpenStack v01.5.2 Release Notes... 1 About this document... 1 Intended audience... 1 Getting help... 1
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes
HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes Part number: AA-RWF7L-TE Eleventh edition: March 2009 Description
Global Array Manager
NEC Express Server Express5800 series NEC Express5800/100,ft Series Global Array Manager Ver. 5.00 Installation Manual [Linux Server Edition] Trademarks Microsoft, Windows and Windows NT are registered
Installation Quick Start SUSE Linux Enterprise Server 11
Installation Quick Start SUSE Linux Enterprise Server 11 NOVELL QUICK START CARD Use the following procedures to install a new version of SUSE Linux Enterprise Server 11. This document gives a quick overview
FUJITSU Software ServerView Infrastructure Manager V2.1. Operating Procedures
FUJITSU Software ServerView Infrastructure Manager V2.1 Operating Procedures CA92344-1718-02 August 2017 Preface Purpose This manual describes overviews of the initial settings and the operating procedures
IBM Flex System CN Port 10Gb Converged Network Adapter. User s Guide
IBM Flex System CN4058 8-Port 10Gb Converged Network Adapter User s Guide IBM Flex System CN4058 8-Port 10Gb Converged Network Adapter User s Guide Note: Before using this information and the product
Hitachi Storage Adapter for SAP Landscape Virtualization Management v Release Notes
Hitachi Storage Adapter for SAP Landscape Virtualization Management v02.3.0 Release Notes About this document... 1 Intended audience... 1 Getting help... 1 Software and Hardware Support... 2 Changes in
Parallels Workstation 4.0 Extreme Read Me
Parallels Workstation 4.0 Extreme Read Me Welcome to Parallels Workstation Extreme build 4.0.6740. This document contains the information you should know to successfully install Parallels Workstation Extreme
ExpressCluster X 3.1 for Linux
ExpressCluster X 3.1 for Linux Installation and Configuration Guide 10/11/2011 First Edition Revision History Edition Revised Date Description First 10/11/2011 New manual Copyright NEC Corporation 2011.
FUJITSU Server PRIMEQUEST 2000 Series Linux Operation Guide -Red Hat Enterprise Linux-
FUJITSU Server PRIMEQUEST 2000 Series Linux Operation Guide -Red Hat Enterprise Linux- CA92344-0702-02 Table of Contents Preface P.3 1. Operation Status Monitoring 1.1 System Monitoring Overview P.6 1.2
This guide consists of the following two chapters and an appendix. Chapter 1 Installing ETERNUSmgr This chapter describes how to install ETERNUSmgr.
Preface This installation guide explains how to install the "ETERNUSmgr for HP-UX" storage system management software on an ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000,
HP StorageWorks Emulex Fibre Channel host bus adapters for ProLiant and Integrity servers using Linux, VMware and Citrix operating systems release
HP StorageWorks Emulex Fibre Channel host bus adapters for ProLiant and Integrity servers using Linux, VMware and Citrix operating systems release notes Part number: AA-RWF7R-TE Fifteen edition: November
Open-FCoE Software Initiator
Open-FCoE Software Initiator Chelsio Communications, Inc. http://www.chelsio.com 1 P age Copyright 2009 Chelsio Communications, Inc. All rights reserved. 370 San Aleso Ave, Suite 100, Sunnyvale, CA 94085
EXPRESSCLUSTER X SingleServerSafe 3.3 for Linux. Installation Guide. 01/29/2016 4th Edition
EXPRESSCLUSTER X SingleServerSafe 3.3 for Linux Installation Guide 01/29/2016 4th Edition Revision History Edition Revised Date Description 1st 02/09/2015 New manual. 2nd 06/30/2015 Corresponds to the
PRIMECLUSTER GDS Snapshot 4.3A20. Installation Guide. Linux
R GDS Snapshot 4.3A20 Installation Guide Linux J2UL-1393-02ENZ0(00) December 2012 Preface Purpose This manual explains how to install R GDS Snapshot. Target Readers This manual is written for people who
NEC ESMPRO Agent Extension
Front Cover Installation Guide Express5800 Series NEC ESMPRO Agent Extension Chapter 1 Summary Chapter 2 System Requirements Chapter 3 Installation Chapter 4 Precautions for Use Rev.2.11 NEC Corporation
NEC ESMPRO Agent Extension Installation Guide
Front Cover NEC ESMPRO Agent Extension Installation Guide Chapter 1 Summary Chapter 2 System Requirements Chapter 3 Installation Chapter 4 Precautions for Use Rev.2.02 NEC Corporation 2012 1 Contents Front
FUJITSU Storage ETERNUS Multipath Driver V2 (for Linux) Installation Information
FUJITSU Storage ETERNUS Multipath Driver V2 (for Linux) Installation Information February 2018 Contents Correspondence of ETERNUS Multipath Driver 's Version Level and Patch... 5 Multipath Driver's Version
ETERNUS OpenStack Volume Driver Release Note
ETERNUS OpenStack Volume Driver Release Note February 2019 Contents ABOUT THIS DOCUMENT... 3 NOTES... 3 Trademarks Red Hat is a trademark of Red Hat, Inc., registered in the U.S. and other countries. Linux
Hitachi Compute Blade 2500 Intel LAN Driver Instruction Manual for SUSE Linux Enterprise Server
Hitachi Compute Blade 2500 Intel LAN Driver Instruction Manual for SUSE Linux Enterprise Server FASTFIND LINKS Getting Help Contents MK-99CB2500054-02 2016 Hitachi, Ltd. All rights reserved. No part of
ExpressCluster X 1.0 for Linux
ExpressCluster X 1.0 for Linux Installation and Configuration Guide 10/12/2007 Fifth Edition Revision History Edition Revised Date Description First 2006/09/08 New manual Second 2006/12/12 EXPRESSCLUSTER
ETERNUS SF AdvancedCopy Manager Operator's Guide for Cluster Environment
ETERNUS SF AdvancedCopy Manager 14.2 Operator's Guide for Cluster Environment J2X1-7452-04ENZ0(00) June 2011 Preface Purpose This manual explains the installation and customization of ETERNUS SF AdvancedCopy
FUJITSU Software StorManMonitor. Version V8.0 December Release Notice
FUJITSU Software StorManMonitor Version V8.0 December 2017 Release Notice All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability.
Express5800/A2040c, A2020c, A2010c, A1040c PCIe Live Error Recovery User s Guide (Release 1.0)
Express5800/A2040c, A2020c, A2010c, A1040c PCIe Live Error Recovery User s Guide (Release 1.0) June 2015 NEC Corporation 2015 NEC Corporation 855-901079-001-A Notes on Using This Manual No part of this
Emulex Universal Multichannel
Emulex Universal Multichannel Reference Manual Versions 11.2 UMC-OCA-RM112 Emulex Universal Multichannel Reference Manual Corporate Headquarters San Jose, CA Website www.broadcom.com Broadcom, the pulse
PARALLELS SERVER 4.0 FOR MAC BARE METAL EDITION README
PARALLELS SERVER 4.0 FOR MAC BARE METAL EDITION README February 18, 2010 1999-2010 Parallels Holdings, Ltd. and its affiliates. All rights reserved. This document provides the first-priority information
Overview. Implementing Fibre Channel SAN Boot with the Oracle ZFS Storage Appliance. January 2014 By Tom Hanvey; update by Peter Brouwer Version: 2.
Implementing Fibre Channel SAN Boot with the Oracle ZFS Storage Appliance January 2014 By Tom Hanvey; update by Peter Brouwer Version: 2.0 This paper describes how to implement a Fibre Channel (FC) SAN
SANsurfer Fibre Channel Command Line Interface (CLI) Table of Contents
SANsurfer Fibre Channel Command Line Interface (CLI) QLogic Corporation All rights reserved Table of Contents 1 Package Contents 2 Requirements 2.1 Hardware Requirements 2.2 Software Requirements 3 OS
ETERNUS Multipath Driver (Oracle Solaris Version) Installation Information
ETERNUS Multipath Driver (Oracle Solaris Version) Installation Information September 2011 Contents Supported OS 1 Restrictions and Resolution schedule (the driver for Solaris 10 OS and Solaris 9 OS) 1
ExpressCluster X LAN V1 for Linux
ExpressCluster X LAN V1 for Linux Installation and Configuration Guide Revision 1NA Copyright NEC Corporation of America 2006-2007. All rights reserved. Copyright NEC Corporation 2006-2007. All rights
P3AM ENZ0. ETERNUS Nagios Plugin 1.1. User's Guide
ETERNUS Nagios Plugin 1.1 User's Guide This page is intentionally left blank. Preface The ETERNUS Nagios Plugin (referred to as "ETERNUS Nagios Plugin" or "this plugin" in the remainder of this manual)
Tiger Store Administration Guide
Tiger Store 2.7.1 Administration Guide August 1, 2016 Copyright 2008-2016 Tiger Technology. All rights reserved. This publication, or parts thereof, may not be reproduced in any form, by any method, for
NEC ExpressUpdate Agent
Installation Guide Express5800 Series NEC ExpressUpdate Agent Chapter 1 Summary Chapter 2 System Requirements Chapter 3 Installation Chapter 4 Precautions for Use Rev.3.09 NEC Corporation 2014 1 Contents
DOCUMENTATION MICROSOFT EXCHANGE INDIVIDUAL BRICK LEVEL BACKUP & RESTORE OPERATIONS
DOCUMENTATION MICROSOFT EXCHANGE INDIVIDUAL BRICK LEVEL Copyright Notice The use and copying of this product is subject to a license agreement. Any other use is prohibited. No part of this publication
ExpressCluster X 1.0 for Linux
ExpressCluster X 1.0 for Linux Installation and Configuration Guide 12/12/2006 Second Edition Revision History Edition Revised Date Description First 2006/09/08 New manual Second 2006/12/12 EXPRESSCLUSTER
Chapter 6. Boot time configuration. Chapter 6 Boot time configuration
Chapter 6. Boot time configuration Chapter 6 Boot time configuration Last revised: 20/6/2004 Chapter 6 Outline In this chapter we will learn about: How the system boots How to configure the boot loaders
Virtual Iron Software Release Notes
Virtual Iron Software Release Notes Virtual Iron Version 4.2 Copyright (c) 2007 Virtual Iron Software, Inc. 00122407R1 This information is the intellectual property of Virtual Iron Software, Inc. This