Gas-Lift Recommended Practices from API and ISO
|
|
- Gwenda Stanley
- 6 years ago
- Views:
Transcription
1 Gas-Lift Recommended Practices from API and ISO
2 Recommended Practices from API and ISO In this breakout session, we will review: Various gas-lift specifications and recommended practices produced by the American Petroleum Institute (API) Various standards produced by the International Standards Organization (ISO) for gas-lift equipment, design, and operations Those who attend this session will learn the topics that are addressed by each of the API and ISO documents, and how to obtain and use them
3 Focus of API Recommended Practices 11V1 Mandrel and valve specifications» Industry standard for manufacture of gas-lift equipment» Still available from API» Being replaced by ISO and RP 11V2 Valve modeling and testing» Industry standard for gas-lift valve testing and modeling» Basis for testing by Valve Performance Clearinghouse» Still available from API» Being replaced by ISO RP 11V5 Gas-lift operations (Submitted to API Committee 11)» Being expanded with many surveillance and troubleshooting recommendations» Available from API Black Red Existing document Enhanced or new document
4 Focus of API Recommended Practices RP 11V6 Design for continuous gas-lift, IPO valves» Basis for many gas-lift spacing / valve design programs» Enhancement to include valve modeling being considered» Available from API RP 11V7 Reconditioning» Basis for industry gas-lift valve reconditioning» Still available from API» Being replaced by ISO RP 11V8 Gas-lift systems» Provides information for designing gas-lift systems» Still available from API Black Red Existing document Enhanced or new document
5 Focus of API Recommended Practices RP 11V9 Dual gas-lift (First draft nearly complete)» Provides recommendations whereby dual gas-lift can be successfully used RP 11V10 Intermittent gas-lift (Submitted to Committee 11)» Comprehensive treatment of intermittent gas-lift design, operation, automation, and troubleshooting RP 11V11 Dynamic gas-lift modeling (Just getting started)» Will cover use of dynamic gas-lift modeling for design, surveillance, and troubleshooting Black Red Existing document Enhanced or new document
6 Focus of ISO Standards Side-Pocket Mandrels» Comprehensive standard for gas-lift mandrel validation and functional testing» Will replace API 11V1» Document published by ISO» Can be obtained from ISO Flow Control Devices» This is ISO s terminology for gas-lift valves» Comprehensive standard for gas-lift valve validation and functional testing» Will replace API 11V1, 11V2, and 11V7» Set to be published in early 2008 Black Red Existing document Enhanced or new document
7 Focus of ISO Standards Running, Pulling, & Kick-Over Tools, and Latches» Comprehensive standard for validation and functional testing of gas-lift tools» Set to be published in Recommendations» Series of recommendations to augment ISO , , and » E.g. how to set up gas-lift shops, train gas-lift personnel, etc.» Set to be published in 2008 Black Red Existing document Enhanced or new document
8 Discussion ISO will (gradually) replace API specs (E.g. 11V1) API will continue for recommended practices ISO provides various levels for: Design validation testing Product functional testing Quality assurance Please use these documents and provide the API and ISO teams with feedback
9 Discussion Additional Recommended Practices or Standards Additional recommended practices and/or standards can be developed if: There is pull from Operating and Service/Supply Companies There are people willing to work on the documents Additional Recommended Practices Being Considered Gas-lift automation (partially covered in API RP 11V5) Gas-lift design with PPO gas-lift valves (partially covered in API RP 11V9) Surface controlled gas-lift valves What others are needed?
10 How to Obtain Documents API Documents Go to mer_id= a4b0a&shopping_cart_id= a4a D28220A&rid=Z56&mid=W094&country_code=US&lang_code=E NGL Enter the desired document number in the search field ISO Documents Go to Navigate to TC (Technical Committee) 67, SC 4 Scroll down to the desired document
11 How to Use these Documents API 11V1 Mandrel and valve specifications Use to guide the gas-lift mandrel and valve manufacturing process until replaced by ISO and API RP 11V2 Valve modeling and testing Use to conduct gas-lift valve performance tests until replaced by ISO API RP 11V5 Gas-lift operations Use to train gas-lift staff who operate and troubleshoot gas-lift wells and systems API RP 11V6 Gas-lift design Use to train gas-lift staff who perform mandrel spacing and valve designs
12 How to Use these Documents API 11V7 Reconditioning Use to guide reconditioning process until replaced by ISO API 11V8 Gas-lift systems Use to train gas-lift staff who design gas-lift systems API 11V9 Dual gas-lift Use to train gas-lift staff who design, install, operate, and troubleshoot dual gas-lift wells API 11V10 Intermittent gas-lift Use to train gas-lift staff who design, install, operate, and troubleshoot intermittent gas-lift wells and systems
13 How to Use these Documents API 11V11 Dynamic gas-lift modeling Use to train gas-lift staff who design, install, operate, and troubleshoot dynamic, unstable gas-lift wells and systems ISO Gas-lift mandrels Use to guide the gas-lift mandrel manufacturing process Use to perform design validation and product functional testing Operating companies can specify the desired level of testing ISO Flow control devices Use to guide the gas-lift valve manufacturing process Use to perform design validation and product functional testing Operating companies can specify the desired level of testing
14 How to Use these Documents ISO Running, pulling, and kick-over tools, and latches Use to guide the gas-lift tool manufacturing process Use to perform design validation and product functional testing Operating companies can specify the desired level of testing ISO Recommendations Use to help specify gas-lift mandrels, flow control devices, and tools Use to guide processes such as setting up and equipping gas-lift shops Use to guide training programs for gas-lift shop personnel and Operating Company personnel
Chapter I. Introduction Excerpts from the Chapter
Introduction What is an Ergonomics Program? This document emphasizes the engineering aspects of ergonomics as a design and evaluation tool. However, it should be emphasized that ergonomics can and needs
More informationOIL & GAS DIVISION TRAINING CONSULTING ENGINEERING IMPLEMENTING AUDITING. Reva Phoenix Engineers & Consultants India Private Limited
www.revaphoenix.com Reva Phoenix Engineers & Consultants India Private Limited OIL & GAS DIVISION TRAINING CONSULTING ENGINEERING IMPLEMENTING AUDITING 01 INTRODUCTION We at Reva Phoenix Engineers & Consultants
More informationMinutes of SC11 Winter Workshop Meeting January 22, 2008
Minutes of SC11 Winter Workshop Meeting January 22, 2008 Sid Thomas - Weatherford, Chair Tom Van Akkeren - Consultant, Secretary Attendees: Ed Baniak API Austin Freeman Halliburton John Yonker Halliburton
More informationCalMAN 5 What s new in CalMAN 5 July 5, 2012
CalMAN 5 What s new in CalMAN 5 July 5, 2012 Conventional Application Main Drop-Down Start, find, and save calibration session Open workflow gated workflows allowed by license type Features, capabilities,
More informationOverview of OGC Document Types
Overview of Document Types Carl Reed February 2015 Overview The following set of slides documents the current set of key documents, their key policy and procedure actions, and key document work flows.
More informationSystems and software engineering Requirements for managers of information for users of systems, software, and services
This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO/IEC/ IEEE 26511 Second edition 2018-12 Systems and software engineering Requirements for managers of information for
More informationCreating a Departmental Standard SAS Enterprise Guide Template
Paper 1288-2017 Creating a Departmental Standard SAS Enterprise Guide Template ABSTRACT Amanda Pasch and Chris Koppenhafer, Kaiser Permanente This paper describes an ongoing effort to standardize and simplify
More informationUnderstanding and Using Metadata in ArcGIS. Adam Martin Marten Hogeweg Aleta Vienneau
Understanding and Using Metadata in ArcGIS Adam Martin Marten Hogeweg Aleta Vienneau Adam Martin National Government Account Management R&D Open Data Marten Hogeweg National Government Professional Services
More information# Name Duration
1 Project 2010-07 GOTO 712 days 2 SAR Development and Finalization 243 days 3 Standards Committee Accepts SAR for Posting 17 days 4 Post SAR for Comment 30 edays 5 Post Request for SAR Drafting Team Nominations
More informationIdaho Department of Correction
Idaho Department of Correction Protect the public, our staff and those within our custody and supervision C. L. BUTCH OTTER HENRY ATENCIO Governor Director Date: 10/5/18 To: SUD Provider Network Treatment
More informationTRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS
TRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS Quality Management System (QMS) Internal Auditor Training Course Exemplar Global International Training Certification Programs Exemplar Global, Inc.
More informationWelcome to the computer-based exam tutorial for the API 510, 570 and 653 exams.
Welcome to the computer-based exam tutorial for the API 510, 570 and 653 exams. This tutorial will provide you with the opportunity to become familiar with the computer testing environment before you begin
More informationBIAS TC Meeting Minutes Meeting #52 October 12, Cathy called the meeting to order at 10:05 am. John Mayer Splain agreed to take notes.
BIAS TC Meeting Minutes Meeting #52 October 12, 2010 1. Administrative Issues 1.1 Call to order Cathy called the meeting to order at 10:05 am. John Mayer Splain agreed to take notes. 1.2 Membership, attendance,
More informationApplication Portal Navigation Guide Applicant Edition
Application Portal Navigation Guide Applicant Edition 1. Accessing the portal 2. Signing in for the first time 3. Creating your application 4. Adding collaborators 5. Narrative responses and supporting
More informationReport on CalConnect Conference XLIII, September 24-27, 2018
CALCONNECT DOCUMENT CD 1805 Type: Report Title: Report on CalConnect Conference XLIII Version: 1.0 Date: 2018-10-23 Status: Published Source: N/A Report on CalConnect Conference XLIII, September 24-27,
More informationeresearch IBC Staff Review Step-by-Step Procedures Core Committee Staff Home Page
1 Core Committee Staff Home Page 2 1. Verify Core Committee Staff is displayed on the home workspace. 2. Note that the Inbox is active. 3. Click the Name of the Registration to be reviewed. 3 4 6 5 4.
More informationMember Impacting Project Overview PR Two-Factor Authentication V3
Member Impacting Project Overview PR20160003 Two-Factor Authentication V3 06/19/2016 Page 1 Table of Contents Table of Contents... 2 Version Control... 2 Executive Summary... 3 Business Impact... 3 Users
More informationMember Impacting Project Overview PR Two-Factor Authentication V3
Member Impacting Project Overview PR20160003 Two-Factor Authentication V3 0406/198/2016 Page 1 Table of Contents Table of Contents... 2 Version Control... 2 Executive Summary... 3 Business Impact... 3
More informationWelcome to the easy step-by-step instructions on how to register for the Energy Generation Conference.
Welcome to the easy step-by-step instructions on how to register for the Energy Generation Conference. If you have not created a profile account on our registration site before, you must do so before you
More informationTAS Self Service Reporting Overview
TAS provides several self service reporting tools. This document briefly describes how to access them and gives a basic explanation of their functionality. It does not attempt to explain how to use the
More informationTraining Catalog. Decker Consulting GmbH Birkenstrasse 49 CH 6343 Rotkreuz. Revision public. Authorized Training Partner
Management and Information Technology Solutions Decker Consulting GmbH Training Catalog Decker Consulting GmbH Birkenstrasse 49 CH 6343 Rotkreuz Revision 9.1 05.12.2018 public Authorized Training Partner
More informationMULTIMEDIA TECHNOLOGY SUPERVISOR
PERSONNEL COMMISSION Class Code: 5154 Salary Range: 36 (S1) MULTIMEDIA TECHNOLOGY SUPERVISOR JOB SUMMARY Under general direction, plan, oversee and implement technology and related systems for the Office
More informationHow do I receive alerts from oneplm? (External)
How do I receive alerts from oneplm? (External) There are (2) types of alerts generated from oneplm: Email Notifications Dashboard Alerts How do I know which alerts will be in email, and which will be
More information1.0 TITLE: Auditing Procedure. 2.0 PURPOSE: To provide an outline and instructions on the GMCS auditing process of clients.
Page 1 1.0 TITLE: Auditing Procedure 2.0 PURPOSE: To provide an outline and instructions on the GMCS auditing process of clients. 3.0 RESPONSIBILITY: GMCS auditors and personnel are responsible for following
More informationSOLUTIONS BRIEF GOGO AIRBORNE SECURITY SUMMARY 2017 Q3 RELEASE
SOLUTIONS BRIEF GOGO AIRBORNE SECURITY SUMMARY 2017 Q3 RELEASE SECURE AIRBORNE CONNECTIVITY: OVERVIEW Gogo Business Aviation realizes the ever-pressing need to be vigilant in staying ahead of potential
More informationTo register for a PCSP Form Presentation in your area, please visit the HHS Learning Portal at the following link, and follow instructions to
1 Register for a Session To register for a PCSP Form Presentation in your area, please visit the HHS Learning Portal at the following link, and follow instructions to register for a session. https://learningportal.dfps.state.tx.us/enrol/index.p
More informationModule 3: Changes and Correspondence
Table of Contents Module 3: Changes and Correspondence Module 3 Objective: Covers how to request application changes and communicate with study team, core staff and reviewers. Important Points: eresearch
More informationWelcome to the USF Computer Store Web Store. Or navigate directly to:
Welcome to the USF Computer Store Web Store Access via: http://www.usf.edu/techpurchases/ for complete USF Tech Purchases guidelines Or navigate directly to: https://usm.channelonline.com/bellind/usfstore/login/?destination=/bellind/usfstore/
More informationDay Hour Timing pm am am am
SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY SCHOOL OF COMPUTING DEPARTMENT OF CSE COURSE PLAN Course Code : CS0451 Course Title : Software Quality Management Semester : VII Course Time : July-Dec
More informationDocument Management Tool Screen MockUps Document
Document Management Tool Screen MockUps Document Version 4, May 5, 2006 Revision History No. Release/ Due Date Comments 0 April 06, 2006 Initial Draft. 1 April 18, 2006 Change font, create new screen shots
More informationMembership Portal Manual
Membership Portal Manual Table of Contents Login... 4 Contact Tab... 6 Contact Information Dropdown...6 Features on the Contact Information Dropdown... 6 Account Information Dropdown...6 Features on the
More informationOil & Gas Industry Quality Management System Auditor/ Lead Auditor Training
An Intensive 2-Week Training Course Oil & Gas Industry Quality Management System Auditor/ Lead Auditor Training 27 Oct - 07 Nov 2019, Dubai 24-OCT-18 This course is Designed, Developed, and will be Delivered
More informationAPI Best Practices and Standards. Glen Benge
API Best Practices and Standards Glen Benge 1 Topics API History API Standards and Standards Development API HF related standards and publications Use of API Standards Conclusions 2 API History 1919: API
More informationSchool Referral User Guide
School Referral User Guide Introduction The Pupil Referral Portal is designed to facilitate the current physical referral processes in an online environment and will provide greater consistency, visibility
More informationeibc Program User Guide
eibc Program User Guide The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 3/26/2018 Table of Contents 1. eibc
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationWelcome to the Introduction to e-snaps Features and Functions navigational guide.
Welcome to the Introduction to e-snaps Features and Functions navigational guide. This navigational guide provides information on the features and functions of an online system referred to as e-snaps.
More informationISO Concept Database - User Guide
Release 1.0 Date: October 2009 ISO Concept Database - User Guide Table of contents Clause Header Page 1 Introduction... 2 2 Access to the ISO/CDB... 2 2.1 Login to the ISO/CDB... 2 2.2 Logout from the
More informationMobile Support Strategy in 2011
Mobile Support Strategy in 2011 This document details the vision for mobile support in 2011: to provide world class, scalable self-service and community-driven support for mobile Firefox users. These are
More informationSENIOR SYSTEMS ANALYST
PERSONNEL COMMISSION Class Code: 5120 Salary Range: 45 (C1) SENIOR SYSTEMS ANALYST JOB SUMMARY Under general direction, analyze work procedures of application systems and coordinate the work of project
More informationNOSAC. Phase I and Phase II FINAL REPORT
NOSAC Cyber Security / Cyber Risk Management Sub-Committee Phase I and FINAL REPORT March 30, 2016 Background NOSAC Subcommittee on Cybersecurity/Cyber Risk set up April 8, 2016 Co-Chairs: Kelly McClelland
More informationIT Governance ISO/IEC 27001:2013 ISMS Implementation. Service description. Protect Comply Thrive
IT Governance ISO/IEC 27001:2013 ISMS Implementation Service description Protect Comply Thrive 100% guaranteed ISO 27001 certification with the global experts With the IT Governance ISO 27001 Implementation
More informationAbstract Review and Rating Instructions
Abstract Review and Rating Instructions The Program Committee has the important task of reviewing all abstract submissions and rating them based on several factors in order to select quality content for
More informationMAGLOCLEN MOCIC NESPIN RMIN ROCIC WSIN Newtown, PA Springfield, MO Franklin, MA Phoenix, AZ Nashville, TN Sacramento, CA
Regional Information Sharing Systems RISS Technology Support Center RISSNET Logon Procedure May 4, 2012 Introduction The purpose of this document is to provide instructions to users of the Regional Information
More informationQualification of National Board Team Leaders and National Board Representatives
Qualification of National Board Team Leaders and National Board Representatives The National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, Ohio 43229 614.888.8320 NB-290,
More informationMAINTENANCE HELPDESK SYSTEM USER MANUAL: CUSTOMER (STAFF) VERSION 2.0
MAINTENANCE HELPDESK SYSTEM USER MANUAL: CUSTOMER (STAFF) VERSION 2.0 TABLE OF CONTENTS NO TOPICS PAGES 1 LOGIN 1-3 2 CHANGE PASSWORD 4 3 CREATE NEW REQUEST 5-7 4 VIEW REQUEST 8-9 5 LOGOUT 10 6 FORGOT
More informationTools & Techniques I: New Internal Auditor
About This Course Tools & Techniques I: New Internal Auditor Course Description Learn the basics of auditing at the new internal auditor level. This course provides an overview of the life cycle of an
More informationBreakout Session: Family Grouping Jenna Winer D+R International
Breakout Session: Family Grouping Jenna Winer D+R International Overview: Why are you here? What are DLC s family grouping rules? How have they evolved? What is the Scaled Performance Table and how do
More information1. Use the website navigation at the top of the page (eg. Power Booty, Classes, Shop) to locate items you are looking for.
FAQ FREQUENTLY ASKED QUESTIONS HOW TO ORDER 1. Use the website navigation at the top of the page (eg. Power Booty, Classes, Shop) to locate items you are looking for. 2. Once you find an item click the
More informationTeam Member Guide: Viewing and Recording your development plan
Team Member Guide: Viewing and Recording your development plan Adding development objectives This guide provides a general overview on how to view and record your development objectives. For ACP Team Member
More informationMetering Systems Solutions. Optimized turnkey measurement solutions and services
Metering Systems Solutions Optimized turnkey measurement solutions and services As an OEM, Cameron offers singlesourced, customer-driven solutions for the transfer of ownership of hydrocarbons throughout
More informationUsability Tests and Heuristic Reviews Planning and Estimation Worksheets
For STC DC Usability SIG Planning and Estimation Worksheets Scott McDaniel Senior Interaction Designer 26 February, 2003 Eval_Design_Tool_Handout.doc Cognetics Corporation E-mail: info@cognetics.com! Web:
More informationHave a question? Speak with a member of our team on
Supplier User Guide - 1 - Contents Dashboard... - 3 - Profile... - 4 - Completing the Questionnaire... - 6 - Request Information... - 10 - Manage Users... - 12 - - 2 - DASHBOARD The dashboard is a central
More informationmyavatar - NYSCRI Session Progress Note
myavatar - NYSCRI Session Progress Note Avatar Support Team April 2014 PSCH Inc. 142 02 20th Ave. Flushing, NY 11351 Tasks Enter Session Progress Note should be completed soon after the service for an
More informationCase Study: Best Practices for Turning your Classroom Trainers into Synchronous Classroom Trainers
502 Case Study: Best Practices for Turning your Classroom Trainers into Synchronous Classroom Trainers Kathleen Sexton, Stanford University Produced by Designing, Presenting, and Producing Welcome to:
More informationRightNow eservice Center 5.5 New Administrator s Survival Guide
RightNow eservice Center 5.5 New Administrator s Survival Guide Table of Contents You may click on each line below to go to that section of this document. OVERVIEW...3 HELPFUL RESOURCES...4 GAINING FAMILIARITY
More informationAgenda and General Information
Agenda and General Information IEEE P802.3bt 4-Pair Power over Ethernet (4PPoE) Chad Jones Cisco Systems Catania, Italy Oct 13, 2015 Page 1 Agenda Welcome and Introductions (Secretary George Zimmerman)
More informationOrientation Easy Reference
Orientation Easy Reference How to complete the online Institutional Orientation course Table of Contents Getting Started... 3 Finishing up... 4 Step 1: Check your scores... 4 Step 2: Retake quizzes...
More informationISO 22301: An Overview of BCM Implementation Process. Presenter: Dejan Kosutic
ISO 22301: An Overview of BCM Implementation Process Presenter: Dejan Kosutic GoToWebinar Control Panel Open and close your Panel View, Select, and Test your audio Submit text questions they will be addressed
More informationBase controller allows eight of the 26 inputs to be configured as outputs for efficient terminal utilization Software included
SC26-2 Programmable SC26-2 Programmable : The next level in machine safety control. Intuitive programming environment for easy implementation Innovative live display feature and diagnostics assist in troubleshooting
More informationTRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS
TRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS Testing and Calibration Laboratory Lead Assessor Training Course Exemplar Global International Training Certification Programs Exemplar Global, Inc.
More informationGS1 Connect 2017 Mobile App
GS1 Connect 2017 Mobile App The 2017 mobile app features the following icons to help make the most of your mobile conference experience: Attendees Schedule Speakers Sponsors Exhibitors Click Passport Program
More informationPraed Foundation Collaborative Training Website
Praed Foundation Collaborative Training Website First time logging into SCX For the first time logging in, Please go to: https://www.schoox.com/login.php To login: Username: email from LearnerNation Temporary
More informationDATA MANAGEMENT SPECIALIST I DATA MANAGEMENT SPECIALIST II
CITY OF ROSEVILLE DATA MANAGEMENT SPECIALIST I DATA MANAGEMENT SPECIALIST II DEFINITION To perform technical and professional duties involving the analysis, design, development, programming, and maintenance
More informationSC319 Umoja Solicitations. Umoja Solicitations Version 76 Last Modified: 8-April
SC319 Umoja Solicitations Umoja Solicitations Version 76 Last Copyright Last Modified: 8-April-2015 United 24-May-13 Nations 1 Agenda Course Introduction Module 1: Overview of the Solicitation process
More informationWhere to find Cognos Research Golden Reports
Where to find Cognos Research Golden Reports January 04, 2019 Table of Contents 1. WHERE TO FIND COGNOS RESEARCH GOLDEN REPORTS... 3 2. USER RESOURCES... 5 1. Where to find Cognos Research Golden Reports
More informationSupporting BlackBerry Smartphones
2010 Bomgar Corporation. All Rights Reserved. www.bomgar.com feedback@bomgar.com 866.205.3650 Page 1 of 34 TC:8/18/2010 Thank you for using Bomgar. At Bomgar, customer service is a top priority. Help us
More informationData Quality Project Open Industry Meeting. Steven Wilson, BSI. What can we do to find lost customers and why do we want to do it?
Steven Wilson, BSI What can we do to find lost customers and why do we want to do it? PAS standard overview for TISA 5 th September 2013 Steven Wilson BSI Standards Solutions 020 8996 6358 steven.wilson@bsigroup.com
More informationResponding to REB Feedback
Responding to REB Feedback A ROMEO Hasty Handbook Presented by the CHEO Research Institute Table of Contents: What is REB Feedback? The REB Feedback Letter The Investigator Response Letter Finding the
More informationISO Reference Data in database format
ISO Reference Data in database format PCA Member Meeting Houston, 20 February 2009 Nils Sandsmark Standards as Databases 2 Applicability of the database approach If a standard consists of a collection
More informationActivities of TCE 3. Accreditation and Certification Program for Official Statistical Professionals in OIC Member Countries (OStat Program)
ORGANIZATION OF ISLAMIC COOPERATION S E S R I C Activities of TCE 3 Accreditation and Certification Program for Official Statistical Professionals in OIC Member Countries (OStat Program) 10 April 2013
More informationNote: All mandatory fields on the Self Placement page must be completed. These fields are indicated by a red asterisk as can be seen here.
InPlace Self Placement TOOL The self-placement application tool process within InPlace allows you to provide the name, contact details and other information about your preferred placement site (school
More informationService Description: Software Support
Page 1 of 1 Service Description: Software Support This document describes the service offers under Cisco Software Support. This includes Software Support Service (SWSS), Software Support Basic, Software
More informationAustralian/New Zealand Standard
AS/NZS ISO/IEC 15910:2004 ISO/IEC 15910:1999 AS/NZS ISO/IEC 15910 Australian/New Zealand Standard Information technology Software user documentation process AS/NZS ISO/IEC 15910:2004 This Joint Australian/New
More informationNFP Client Learning Portal
Client Learning Portal Overview... 2 The Client Learning Portal: Key Components... 3 Register for a Class... 4 Join a Scheduled or In-session Class... 6 Watch a Recorded Class... 8 Frequently Asked Questions...
More informationFOUNDATION CERTIFICATE IN INFORMATION SECURITY v2.0 INTRODUCING THE TOP 5 DISCIPLINES IN INFORMATION SECURITY SUMMARY
FOUNDATION CERTIFICATE IN INFORMATION SECURITY v2.0 INTRODUCING THE TOP 5 DISCIPLINES IN INFORMATION SECURITY SUMMARY The Foundation Certificate in Information Security (FCIS) course is designed to provide
More informationTIME LINE Physicians Legal Issues Conference June 7-8, 2017 The InterContinental, Chicago, IL
Updated as of June 30, 2016 July-August 7/15-16/16 Milwaukee Leadership Mtg. will meet to discuss timeline, responsibilities & overview of committee. Discuss sponsorship / Week of 7/27 Request any updates
More informationRelease Notes RelayClinical Platform 13.5
Release Notes RelayClinical Platform 13.5 Health Connections Brought to Life Table of Contents About this Document... 3 Your Feedback Matters... 3 New and Enhanced Features... 4 RelayClinical Service Interop
More informationUploading Files to Project MUSE May 2018
Uploading Files to Project MUSE May 2018 Project MUSE publishes journal articles in four categories: Complete Issues Preprint Publishing Continuous Publishing Digital Only Publishing. Instructions for
More informationDraft Terms of Reference for ISO TC 46/SC 9 Working Group 10: ISO Project 3901, revision of the "International Standard Recording Code (ISRC)"
ISO TC 46/SC 9/Working Group 10 for ISO Project 3901: Revision of the International Standard Recording Code (ISRC) ISO TC46/SC9 N 477 Draft Terms of Reference for ISO TC 46/SC 9 Working Group 10: ISO Project
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationGlobal Specification Protocol for Organisations Certifying to an ISO Standard related to Market, Opinion and Social Research.
CONTENTS i. INTRODUCTION 3 ii. OVERVIEW SPECIFICATION PROTOCOL DOCUMENT DEVELOPMENT PROCESS 4 1. SCOPE 5 2. DEFINITIONS 5 3. REFERENCES 6 4. MANAGEMENT STANDARDS FOR APPROVED CERTIFICATION BODIES 6 4.1
More informationOutline. Background. Motivation. Developer meetings. Meeting outcome. Marcus Oskarsson Page 2
1 Outline Background Motivation Developer meetings Meeting outcome Page 2 UI API - Background Matias gave a talk less is more at the last meeting (http://mxcube.github.io/mxcube/doc/meetings_2018_diamond/mxcubemeeting_dls_lessismore.pdf)
More informationResearcher User Manual
Researcher User Manual Post-Review Application Management Cloning Applications, Creating and Managing Events Audience: Principal Investigators & Project Team Members Updated: December 1, 2016 Checkpoint
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 233 Edition 2.0 2017-02 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Operational Document IECEx
More informationPractitioner Certificate in Business Continuity Management (PCBCM) Course Description. 10 th December, 2015 Version 2.0
Practitioner Certificate in Business Continuity Management (PCBCM) Course Description 10 th December, 2015 Version 2.0 Course The Practitioner Certificate in Business Continuity Management (PCBCM) course
More informationEXAM PREPARATION GUIDE
When Recognition Matters EXAM PREPARATION GUIDE PECB Certified ISO 14001 Lead Implementer www.pecb.com The objective of the PECB Certified ISO 14001 Lead Implementer examination is to ensure that the candidate
More informationAvera CE Portal Orientation Packet
Avera CE Portal Orientation Packet Include: Welcome Letter from Leadership & Organizational Development The Avera Educational Activity Process How to create an Avera CE Portal Profile How to access your
More informationUSER GUIDE for Smartsheet VERSION 1, NOVEMBER 2014
USER GUIDE for Smartsheet VERSION 1, NOVEMBER 2014 How it Works Simply create a Backupify account and authorize it to connect to your Smartsheet account- our application will do the rest. Every day, Backupify
More informationResearcher 2: Post-Submission Advanced Topics
National Research Network Researcher 2: Post-Submission Advanced Topics IRBNet provides the research community with an unmatched set of secure, web-based collaboration tools to support the design, management,
More informationeiacuc Reference for Veterinarians
1. Go to https://eiacuc.rutgers.edu 2. Enter your Rutgers NetID and Password. 3. Click Login to enter the site. Logging In My Inbox My Inbox displays all eiacuc submissions associated with you. Identify
More informationThe Next Step for ISO 9001 and ISO Certification Advanced Surveillance and Recertification procedures (ASRP)
Companies with mature management systems often feel a decrease in value and an increase in cost over time due to third-party audits. Advanced Surveillance and Recertification Procedures (ASRP) is a solution
More informationMaking you aware. CS577a 17Fall Team 04
1 Making you aware CS577a 17Fall Team 04 2 :.: Outline 1. Operational Concept Overview 2. UI Demo 3. Test Cases and Results 4. Quality Focal Point 5. Transition Plan 3 :.: Operational Concept Overview
More informationQuickTime and a Tools API Breakout. TIFF (LZW) decompressor are needed to see this picture.
Tools API Breakout The number of Semantic Web tools is growing very fast. When building Semantic Web applications, we would like to be able to assemble a set of tools, choosing the best-of-breed for each
More informationDevelopment System (UL CSDS)
UL Collaborative Standards Development System (UL CSDS) s UL CSDS Basics What is UL CSDS? The UL Collaborative Standards Development System (CSDS) was created to further enhance the maintenance of UL's
More informationFor Governing Body, Seminary and College, or Other Non-church Positions.
Church Leadership Connection PC(USA) Instructions for Entering a Church Information Form (CIF) www.pcusa.org/clc 1-888-728-7228 ext. 8550 or clcstaff@pcusa.org Church Leadership Connection (CLC) hopes
More informationService Manual - Memory Upgrade
Inspiron 14 3000 Series Service Manual - Memory Upgrade Regulatory Model: P53G Regulatory Type: P53G002 Contents Before working inside your computer...3 Before you begin... 3 Safety instructions... 3 Recommended
More informationHow to Submit a Paper Panel Proposal
How to Submit a Paper Panel Proposal 1. Step One: Session Title and Submitter Information To begin your submission, enter the session title as well as your e-mail address and full name in the boxes provided.
More informationCASA External Peer Review Program Guidelines. Table of Contents
CASA External Peer Review Program Guidelines Table of Contents Introduction... I-1 Eligibility/Point System... I-1 How to Request a Peer Review... I-1 Peer Reviewer Qualifications... I-2 CASA Peer Review
More informationASSOCIATE PRODUCER/DIGITAL ANIMATOR
PERSONNEL COMMISSION Class Code: 5146 Salary Range: 30 (C1) ASSOCIATE PRODUCER/DIGITAL ANIMATOR JOB SUMMARY Under general supervision, participate in or independently create, write, produce, direct and
More information