NC COM GND Warning sensor. voice box. socket

Transcription

1 NC COM GND Two signal lines Two signal lines voice box Warning sensor The power cord The power cord socket

2

3

4 Moving detection and s Step 1: open the desk menu by right-click main menu set up Alarm Motion Step 2: enable the motion function Step 3: set up the trigger, click the settings

5 Step 4: Click the in alarm window and enable all channel Snap Then click OK button to save settings. Step 5: set the motion Area, click the settings

6 Step 6: choose the motion area you want, click and drag the mouse, the screen with block is the motion area you want Step 8: right- click adjust Sensitivity ( remark: the number smaller, the sensitivity higher) click save Step 9: click Apply bottom to save the motion settings Step 10: click the Exit button into setup window Step 11: click the network into network settings Step 12: choose the menu Step 13: set the send smtp server Step 14: tick the SSL cheek

7 Step 15: set the send address Step 16: set the send password Step 17: set the receive address Step 18: click Test button for Test settings Step 19: The test result will be displayed in warning window Step 20: click ok bottom to exit Step 21: click exit to exit network window

8 Remark: you will receive the alarm if the motion alarm done setting: Please follow up the below link to set up the notification: mail-account-to-set-dvr-mail-alarming- How to add device (DVR) in ZOSI VIEW? 1. Open your ZOSI VIEW app, input your app's register name and app's register password. Click Login. NOTE: MAKE SURE THE CLOUD SERVER STATUS OF YOUR DVR IS CONNECTED.

9 2. Click the in the topleft, select Device Manager. Enter into Device Manager, click the in the top right.

10 3. Get into Add Device, input your device information (refer to the below picture). After that, click the bottom of Add Device.

11 4. Then, click the in the top left, select the Live Preview. Enter into Real time monitoring, click the in the top right. In the interface of Channel List, select the device which you want to preview, click the. After that, the grey icon ( ) will change to colorful ( ), click the bottom of Start Live View. 5. Finally just wait a little moment, you can view your DVR on your phone.

12

13

14 Wifi setting Remark: Our DVR only can be compatible for RT3070 or RT5370 Wifi module as picture: Connection: Plug RT3070 or RT5370 Wifi module into the USB2.0 interface.

15 Operation Steps: Step 1: open the desk menu by right-click set up Network

16 Step 2: choose the WIFI set up Step 3: tick the wifi enable Step 4: click the Search signal button to search wifi

17 Step 5: then input the wifi password you have searched Step 6: click the set up button Step 7: click the Apply button

18 Step 8: click the exist button to exist the window, it will be displayed in warning window, click ok and back to the Main menu. Step 9: when you finish all those steps, click the information button

19 Step 10: click the network button to check the Internet is OK.

20

21 POWER RECORD HDISK NETWORK REC PLAY PTZ MENU ESC Quick Operation Guidance

22 Step 1. Do it as follow diagram How to connect DVR to LAN? Optical Fiber DSL Router RJ45 cable WIFI or RJ45 Cable DVR/NVR PC Unplug modem then connect router and device DSL/CABLE modem DSL/CABLE modem ROUTER 1 2 DSL/CABLE modem ROUTER DSL/CABLE modem ROUTER DVR 3 4 1

23 Note: Before monitoring via smartphone or computer, please ensure your DVR can be connected to internet. Step 2. How to test your DVR network? (1) Right click Mouse - Main menu - Set up - Network, (2) Tick Obtain IP address automatically (3) Click Test,if remind OK, that is, connect network successfully. Note: Please ensure DHCP in your router is open 2

24 Step 3. Remote Monitoring A: Smartphone Remote Monitoring (1) iphone/ipad User: Search SECU365 in app store and install it, or scan the following QR code to download secu365 Appstore QR code (2) Android User: Search SECU365 in google play and install it, or scan the following QR code to download secu365 Android QR code (3) The login interface instruction Start secu365 as following 3

25 Name: Device name (It is convenient you distinguish the different device) GID Serial ID in DVR, which can be obtained DVR system menu (Main menuinformation-system- Serial ID). It can be input via QR code scaning User: admin (defaulted, same as DVR system password) Password: Null(Defaulted, same as DVR system password) Channel Number DVR channel Note: If fail to preview surveillance system as above, try to setting a fixed IP address as following 4

26 1. Vist your router, and open it as below 2. Find the router subnet mask(for example: ),preferr ed DNS server(for example: ), alter DNS Server(for example: ) 3. Input Subnet mask, Preferred DNS server and alter DNS Server in DVR menu accordingly, DVR system menu path is : Main menu Set up - Network Note: Please ensure the IP address you input is not used by other device, such as, computer, server, etc. Click Test,if remind OK, that is, connect network successfully. 5

27 B. :IE browser remote monitoring (1) Please input the website on your PC use the IE browse, the page will automatically jump to the picture as the follow (2) press register as the follow picture 6

28 (3) after finish register, please back to input your information in the login account and login password 3.1 Enter into Tool bar and select to appear the below picture: 3.2 Select icon and tick the settings of ActiveX controls and plugins to enable, details as follows: 3.3 Lastly, after tick all the Enable, please click to exit. at this moment, you could input IP address to run your program. 3.4 Click" ",then download the "anycam.exe" file and run it. 7

29 Remind: If the widgets are not downloaded and run successfully, please check if your browser s safety level or firewall setting is too advanced. Open IE browser to enter into tool Internet Option Internet user-defined level enable widgets. Downloading and running install widgets need one minute, please wait patiently. (4) click the Devices button Device ID: The same you input in your mobile Device Name: Device name, it is used to distinguish the different device Device username: It is default admin (same as DVR system paswword) Device Password: It is default none (same as DVR system paswword) Channels: DVR channel (5)Click live, then it will jump the follow picture 8

30 The product features, specifications, pictures, etc. should be subject to real products. We reserve the rights to modify all of them without notice.

31 Schedule recording: 1. Please go to DVR Main Menu > Setup > Schedule recording. 2. Double click Left key of Mouse to someday( according to your needs)

32 3. Add the needed recording time(start time-end time), then click Note: Time only can set Hour and Minute, No seconds 4. If you need every day (From Monday to Sunday) records, pls click Copy, then click OK

33 5. You can set every day recording, setting OK!