USER MANUAL. Kamera IP H-342 ; # H-343 ; # H-351 ; # H-352 ; # H-353 ; # H-355 ; #

Transcription

1 Kamera IP H-342 ; # H-343 ; # H-351 ; # H-352 ; # H-353 ; # H-355 ; # 1

2 Connecting the Hardware Conecting Wi-Fi. USER MANUAL Connecting via network cable Device Connection 1. Near the router, connect camera to power and connect with router using cabel ethernet. 2. In the case of PTZ cameras, the camera will perform a rotation test and then stop in the initial position. 3. The first configuration of the camera must be carried out via a wired connection using an Ethernet cable. Later in the manual, the WiFi network configuration will be explained 4. Connect your mobile phone to the Wi-Fi network. 2

3 Downlad and Install App Android users can search IPCAM P from Google Play store, or just scan the QR-code below to download the App. ios users can download IPCAM P from App Store. After installing, the icon will pop up on the mobile phone. Add Camera 1. Run the IPCAM P App. Click on on the home screen, then click on Add manually. Please click on Next from the first option Ethernet cable connection. (1-1) (1-2) 3

4 2. Wi Fi Camera we can add: Scanning the unique UID of the camera from its enclosure -Click "Scan" (Figure 2-1). By manually entering the UID number, click on the UID field (Figure 2-1). Looking for a local LAN - click "Search" (Figure 2-1) After searching the network, the program will display a list of available cameras, then select the appropriate UID of the device (fig. 2-2) by clicking on it.that (2-1) (2-2) 4

5 3. When we have enter UID number, enter a name for your camera enter security code (default password is: admin or ) and next click on OK as picture 3-1 (3-1) 4. Once the camera was added, you will be redirected to the home screen, where you can view the camera. Click on the video, it could be shown solely. Click on < on the top for return. (4-3) (4-4) ` 5

6 Advance settings 5. As picture 5-1, tap, to get function list bar and tap, navigating into advanced settings, you can change password, set up motion detection, recording etc (5-1) (5-2) (5-3) (5-4) 6

7 Change password camera 6. In the "Advanced Settings" menu (picture 5-1) Click "Modify Security Code" (picture 6-1), enter the old password in the "Old", the default password is admin. In the "New" enter new password, in the "Confirm" enter new password again, then click OK. The password will be changed. (6-1) (6-2) The program will go to edit camera settings view. Make a re-connection to watch real-time video transmission. 7

8 Settings connect Wi-fi 7. From the "Advanced Settings" menu, click "Wi-Fi Network Management (picture 7-1), expand the list of available Wi-Fi networks, choice and click (pcture 7-2), In the next window, enter the password for the selected Wi-Fi network and press "OK" (Picture 7-3). Correctly adding a camera to a WiFi network is shown in picture 7-4. The name of the Wi-Fi network and "connected. You can remove the Ethernet cable. For a moment the camera preview will be unavailable and will reappear after the camera switches to a Wi-Fi connection. (7-1) (7-2) (7-3) (7-4) 8

9 Motion decetion 8. From the "Advanced Settings" menu, "Event settings" (picture 8-1), expand the menu (picture 8-2) and select the motion detection sensitivity. Off sensor ("Off") to the maximum sensitivity ("Max"). The higher the sensitivity, the more the camera will record. In the "Notification" menu in the list (Picture 8-3) you can choose the type of event / alarm notification. When set to sensitivity, the camera may sound a beep.. (8-1) (8-2) (8-3) 9

10 Recording SD card 9. The SD card's recording function is only available when the SD card is mounted in the device. From the "Recording Settings" menu. Select one of the options from the list (Picture 9-1). OFF (turn off recording), All time (continuous recording in 24 hour mode), Alarm (motion video recording). If the space on the SD card is full, the camcorder automatically overwrites the oldest recordings. (9-1) Play records SD card 10. After a successful video recording setup. On the SD cards will display video records 10 minutes time, or alarm records. To check the recording, go back to the main screen and click "Recording Files" (picture 10-1). In the list (pigure 10-2), select the video with the specified time and type of recording to play it. (9-3) (9-4) 10

11 Made in ChRL for: PROLECH R. i S. Leszek Sp. J. Stary Puznów 58B Garwolin, Polska Service: Serwis BLOW Stary Puznów 58B Garwolin, Polska serwis@prolech.com.pl Electrical equipment marked with a crossed-out wheelie bin symbol cannot be disposed of with municipal waste. Such equipment is subject to collection and recycling