Metso DeviceCare. Quick Setup Guide FOR YOUR SAFETY READ THESE INSTRUCTIONS FIRST!

Transcription

1 Metso DeviceCare Quick Setup Guide FOR YOUR SAFETY READ THESE INSTRUCTIONS FIRST! For more information go to our website 10DeviceCare QG - 3/2017

2 1. DeviceCare Installation a. To download DeviceCare registration is needed. Download DeviceCare: Fig 1. Metso Field Device Configuration tool and registeration. b. Unzip/Extract the installation files before running application DCSetup.exe c. Select I agree to accept the license agreement and then press next. d. Select the installation path and confirm if adding a DeviceCare link to the desktop. e. Click next to start the installation process. A computer restart may be required. A few windows may appear asking to approve installation of i.e. Softing commdtms, click Install to approve. Once com plete click the X button to close the setup.

3 2. DTM Installation a. If there is a prior version of the DTM package installed, use Windows Add or Remove Programs utility to uninstall Metso Device DTMs. b. To download DTM registration is needed. Download the latest Metso Device DTM s Fig 2. Metso Field Device Configuration DTM and registeration c. Unzip/Extract the installation files before running application Setup.exe d. Follow the prompts and accept the license agreement to complete the installation. e. DeviceCare DTM catalog update: i. Note: DeviceCare will automatically update the DTM catalog so no additional steps are required ii. View the DTM catalog by clicking on the settings icon

4 3. Initial Setup a. For a HART modem: i. Install any required device drivers for your HART modem ii. Connect the HART modem to the computer. The Add Hardware wizard will match the device to the installed device drivers. iii. If using the MACTek VIATOR, ViT HART modem or Microlink PN , no additional setup is needed skip to step 4. iv. For other HART modems, determine the COM port of the modem: v. On the desktop, right click on Computer (My Computer) and select Manage vi. vii. Select Device Manager in the left pane and expand Ports (COM & LPT) in the right pane Take note of the COM# displayed next to the HART Modem. b. For Foundation fieldbus: i. Install NI-FBUS communication manager c. For the NDX USB adapter: i. Install the USB adapter driver ii. Install the USB adapter commdtm

5 4. Connecting to Field Devices Automatic for the MACTek VIATOR or ViT HART a. Run DeviceCare by double-clicking on the Metso DeviceCare icon b. Connect the HART modem up to laptop and connect the clips anywhere in the 4-20mA loop. Ensure that the field device is powered up (typically >4mA) c. Click on the Automatic button d. DeviceCare will now scan for the device, select the correct device DTM, go online with the device, and open the DTM window. e. Follow the manufactures instructions for use of the device DTM. f. Once you have completed with the first device, connect the HART modem to the next physical device then press the home button and start again from step C. a. b. Assistant for any other HART modem Run DeviceCare by double-clicking on the DeviceCare icon Connect the HART modem up to laptop and connect the clips anywhere in the 4-20mA loop. Ensure that the field device is powered up (typically >4mA) c. Click on the Assistant button d. Click on the required Protocol for communication, i.e. HART e. Click on the modem connected to the device, i.e. Microlink HART f. Configure the modem. Click on Advanced Serial Interface and select the COM #. g. Click Scan. DeviceCare will now scan for the device, select the correct device DTM, go online with the device, and open the DTM window. h. Follow the manufactures instructions for use of the device DTM. i. Once you have completed with the first device, connect the HART modem to the next physical device then press the home button and start again from step C.

6 5. Saving Device Data DeviceCare can save device data to a device report file or DTM XML export file. It shall be noticed that to save all data to Device report or DTM XML export file first Select Program functions Read from device shall be done. a. Saving a Device Report: i. Select Device Report Print device report. A preview of the report will be displayed. Click Print. Select a printer to print a hard copy or select a PDF printer driver to save as a PDF. Press Print. b. Saving to DTM XML file NDX case i. Select Additional functions Export. Dialog will ask location to save XML file. Select location, set file name and press save. c. Saving to DTM XML file ND9000, VG9000 and SG9000 case i. Select DTM Tools functions Export. Dialog will ask location to save XML file. Select location, set file name and press save.

7

8 Metso Flow Control Inc. Europe,Vanha Porvoontie 229, P.O. Box 304, FI Vantaa, Finland. Tel Fax North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, M A 01545, USA. Tel Fax South America, Av. Independéncia, 2500-Iporanga, , Sorocaba-São Paulo, Brazil. Tel Fax Asia Pacific, Haw Par Centre #06-01, 180 Clemenceau Avenue, Singapore Tel Fax China, 11/F, China Youth Plaza, No.19 North Rd of East 3rd Ring Rd, Chaoyang District, Beijing , China. Tel Fax Middle East, Roundabout 8, Unit AB-07, P.O. Box 17175, Jebel Ali Freezone, Dubai, United Arab Emirates. Tel Fax