PASW Statistics for Windows Installation Instructions (Single User)

Size: px

Start display at page:

Download "PASW Statistics for Windows Installation Instructions (Single User)"

Eugene Bryant
6 years ago
Views:

1 PASW Statistics for Windows Installation Instructions (Single User) The following instructions are for installing PASW Statistics 18 using a single-user license. A single-user license allows you to install PASWStatisticsonuptotwocomputers,ifthose computers are used by one user. System Requirements for PASW Statistics The minimum hardware and software requirements for PASW Statistics are as follows: Operating System Microsoft Windows XP (32-bit version), Windows Vista (32-bit and 64-bit versions), or Windows 7 (32-bit and 64-bit versions). Configuration Intel or AMD processor running at 1 gigahertz (GHz) or higher. 1gigabyte(GB)ofRAMormore. 675 megabytes (MB) of available hard-disk space. If you install more than one help language, each additional language requires MB of disk space. DVD drive. Super VGA (800x600) or a higher-resolution monitor. For connecting with PASW Statistics Server, a network adapter running the TCP/IP network protocol. Software Internet xplorer 6.0 or higher Authorization Code You will also need your authorization code, which is delivered along with your software on a separate sheet of paper or on the inside cover of the DVD case. If you downloaded PASW Statistics, your authorization code is available from your Asset Management Portal. The authorization code enables you to obtain a license for Base and any PASW Statistics add-on modules that you have purchased. If you cannot find your authorization code, contact your sales representative. In some cases, you might have multiple codes. You will need all of them. Note: You cannot run PASW Statistics remotely via Windows Terminal Services or Citrix with a single-user license. 1

2 2 PASW Statistics for Windows Installation Instructions (Single User) Installing PASW Statistics Note: To install PASW Statistics, you must be logged on to your computer with administrator privileges. Running Multiple Versions and Upgrading from a Previous Release You do not need to uninstall an old version of PASW Statistics before installing the new version. Multiple versions can be installed and run on the same machine. However, do not install the new version in the same directory in which a previous version is installed. Note for PASW Statistics Developer If you are installing PASW Statistics Developer, you can run the product standalone. You can also install R ssentials and Python ssentials to develop with R and Python. For more information, see the topic PASW Statistics Integration Plug-ins on p. 5. Installing from the DVD Windows XP Insert the DVD into your DVD drive. The AutoPlay feature presents a menu. On the AutoPlay menu, click Install PASW Statistics, and then follow the instructions that appear on the screen. See Notes for Installation for any special instructions. Windows Vista or Windows 7 You must run the AutoPlay as administrator: Close the AutoPlay window that automatically appeared when you inserted the DVD into your DVD drive. Using Windows xplorer, browse to the DVD drive. Right-click setup.exe in the Windows subfolder and choose Run as Administrator. On the AutoPlay menu, click Install PASW Statistics, and then follow the instructions that appear on the screen. See Notes for Installation for any special instructions. Installing from a Downloaded File Windows XP Double-click the file that you downloaded, and then follow the instructions that appear on the screen. See Notes for Installation for any special instructions.

3 PASW Statistics for Windows Installation Instructions (Single User) 3 Windows Vista or Windows 7 You must run the installer as administrator: Using Windows xplorer, browse to folder where you downloaded the file. Right-click the downloaded file and choose Run as Administrator. Follow the instructions that appear on the screen. See Notes for Installation for any special instructions. Notes for Installation This section contains special instructions for this installation. License type. Be sure to select Single-User License. Serial number. If SPSS Inc. provided a serial number, enter the one delivered with your product. Help language. PASW Statistics provides the ability to change the user interface language. If you want the help language to always match the user interface language, select the languages that you may use. Installing help for additional languages increases disk space requirements by MB for each language. You can also install additional languages later by choosing to change the installation in the Windows Control Panel. Licensing Your Product After the main part of the installation is complete, click OK to launch the License Authorization Wizard. The License Authorization Wizard allows you to obtain a license for PASW Statistics. If you do not get a license now, you can enable a temporary trial license that allows PASW Statistics to be used for a trial period. For PASW Statistics, all add-on modules are enabled. For PASW Statistics Developer, only the Core system is enabled. After the trial period which begins when the product is first used PASW Statistics will no longer run. Therefore, it is recommended that you obtain a license as soon as possible. You must either obtain a license or enable the temporary trial license to use PASW Statistics. Note: Licenses are tied to your computer s hardware with a lock code. If you replace your computer or its hardware, you will have a new lock code and will need to repeat the authorization process. If you find out that you exceeded the allowable number of authorizations specified in the license agreement, contact your sales representative. Warning: The license is sensitive to time changes. If you must change the system time and then cannot run the product, contact SPSS Inc. Technical Support. Using the License Authorization Wizard Note: If you are running Windows Vista, you may be prompted for administrator credentials. Without the correct credentials, you will not be able to run the Licence Authorization Wizard.

4 4 PASW Statistics for Windows Installation Instructions (Single User) If you don t launch the License Authorization Wizard during installation or cancel the License Authorization Wizard before obtaining a license, you can launch it by choosing License Authorization Wizard in the Windows Start menu program group for PASW Statistics. On Windows Vista or 7, you must run as administrator. Right-click the License Authorization Wizard shortcut and choose Run As Administrator. When prompted, choose License my product now. If you want to enable the trial license instead, refer to nabling a Trial License on p. 4. When prompted, enter one or more authorization codes. Authorization codes are delivered along with your software on a separate sheet of paper or on the inside cover of the DVD case. If you downloaded PASW Statistics, your authorization code is available in your Asset Management Portal. The License Authorization Wizard sends your authorization code over the Internet to SPSS Inc. and automatically retrieves your license. If your computer is behind a proxy, click Configure proxy settings and enter the appropriate settings. If the authorization process fails, you will be prompted to send an message. Choose whether you want to send the message through your desktop program or through a Web-based application. If you choose the desktop option, a new message with the appropriate information will be created automatically. If you choose the Web-based option, you must first create a new message in your Web-based program. Then copy the message text from the License Authorization Wizard and paste it into your application. Send the message and respond to the prompt in the License Authorization Wizard. The message will be processed almost instantaneously. You can click nter License Code(s) to enter any license code(s) that you receive. If you already closed the License Authorization Wizard, restart it and select License my product now. On the nter Codes panel, add the license code that you received and click Next to complete the process. nabling a Trial License You can enable a trial license instead of installing the regular license. Launch the Licence Authorization Wizard. When prompted, choose nable a temporary trial period. When prompted, enter the trial license code in the Trial License box. Instead of typing or pasting the code, you can click the browse button to locate the trial license file in the product installation directory (typically trial.txt). The Trial License Wizard will read the license from the file and automatically fill in the box.

5 PASW Statistics for Windows Installation Instructions (Single User) 5 Viewing Your License You can view the license by relaunching the License Authorization Wizard. The first panel displays the licensing information. Click Cancel when done, and click Yes when prompted about cancelling. Note: You can also view the license by running the SHOW LICNS PASW Statistics syntax command. Installing PASW Reports for Surveys Components To access OL DB data sources, you must have the following installed on the same computer on which PASW Statistics is installed:.nt Framework, version 2.0 service pack 1 or later PASW Reports for Surveys Components For PASW Statistics, an option to install the PASW Reports for Surveys Components is available on the Autoplay menu, or, if you downloaded PASW Statistics, it is available from your Asset Management Portal by clicking the Installation Instructions link for your product. For PASW Statistics Developer, the PASW Reports for Surveys Componentsis not available on the DVD, but you can download it by clicking the Downloads tab at The.NT Framework is available as a download from Ifyouarenotsure whether you have the.nt Framework, try installing the PASW Reports for Surveys Components first. The installation will check for the.nt Framework. Note: All PASW Data Collection products installed on one computer must be at the same version level. The version of the PASW Reports for Surveys Components on the DVD is 5.6. If you have an older version of a PASW Data Collection product installed, you will be prompted to uninstall it. PASW Statistics Integration Plug-ins PASW Statistics Integration Plug-ins enable you to extend the command syntax language with programs written in specific external languages. Integration with the following languages is available: R. The R Plug-in is included with R ssentials. For more information about installation, refer to R ssentials Installation Instructions.pdf in the /Documentation/<language>/InstallationDocuments folder on the DVD. If you downloaded PASW Statistics, installation instructions are available from your Asset Management Portal by clicking the Installation Instructions link for your product. Python. The Python Plug-in is included with Python ssentials. For more information about installation, refer to Python ssentials Installation Instructions.pdf in the /Documentation/<language>/InstallationDocuments folder on the DVD. If you downloaded PASW Statistics, installation instructions are available from your Asset Management Portal by clicking the Installation Instructions link for your product. VB.NT. For more information, visit Developer Central (

6 6 PASW Statistics for Windows Installation Instructions (Single User) Uninstalling PASW Statistics To completely uninstall PASW Statistics: Use the Windows Control Panel to remove PASW Statistics. Updating, Modifying, and Renewing PASW Statistics If you purchase additional add-on modules or renew your license, you will receive a new authorization code (or codes). For instructions on using the authorization code(s), see Licensing Your Product on p. 3.

Windows Download & Installation

BrokerMetrics / AgentMetrics Instructions for a New Installation Windows Download & Installation... 1 Macintosh Download & Installation... 6 Troubleshooting... 10 How to verify your installation... 11