6-1. Section Six Programming Support Tools. Programming Support Tools Overview

Transcription

1 Section Six Programming Support Tools Programming Support Tools Overview Programming Terminals (Dedicated) MicroLogix 1000 Hand-Held Programmer SLC 500 Hand-Held Terminal Programming Software RSTune PID Loop Tuner Software RSLogix 500 Programming Software PLC-500 A.I. Series Programming Software MicroLogix 1000 A.I. Series Programming Software PLC-5 A.I. Series Programming Software WINtelligent LOGIC 5 Software RSEmulate 5 and RSEmulate 500 Software ApplicationBuilder Software Diagnostics and Maintenance Software ControlGuardian and ControlGuardian Archiver5 Software PathFinder Software for PLC-5/15, -5/25, -5/30, 5/40, -5/60 Processors Product Compliance Information

2 Overview Programming Support Tools Overview Categories Small, Dedicated Programming Terminals Programming Software MS-DOS-based software Windows-based software Products MicroLogix 1000 Hand-Held Programmer page 6-3 Specifically designed for use with MicroLogix processors Multiple language support 2-line 16-character LCD display UL/CSA SLC 500 Hand-Held Programmer page 6-4 For SLC 500, 5/01, and 5/02 processors Resistant to liquid spills PLC-500 A.I. Series Programming Software page 6-7 Program SLC 500 processors and MicroLogix 1000 processors MicroLogix 1000 A.I. Series Programming Software page 6-8 Program MicroLogix 1000 processors PLC-5 A.I. Series Programming Software page 6-9 Program PLC-5 family of processors RSTune PID Loop Tuner Software page 6-5 Tune PID loops RSLogix 500 Programming Software page 6-6 Program SLC 500 and MicroLogix 1000 processors WINtelligent LOGIC 5 Software page 6-10 Program PLC-5 family of processors RSEmulate 5 and RSEmulate 500 Software page 6-12 Simulate several PLC-5 and SLC 500 processors Process Configuration and Operation Software page 7-69 Use PCO software with the ladder logic software packages listed above to provide process control (PID) functions for PLC-5 processors 6-2

3 Programming Terminals (Dedicated) MicroLogix 1000 Hand-Held Programmer Specifications (Cat. No HHP-B30) Power supply loading 83 24V dc (1.99W) Operating Temperature 0 to 50 C (32 to 122 F) Storage Temperature -20 to 60 C (-4 to 140 F) Humidity Display Type Keypad Weight 5 to 95% (without condensation) 2 line x 16 character (LCD) 30 Rubber/carbon-based keys 0.28 kg (0.62 lb) Dimensions mm (3.72 in.) The Hand-Held Programmer (HHP) lets you create and modify programs for your MicroLogix Controller, and monitor programs through features such as textual fault messages, trace, and multi-point monitoring. Optional EEPROM memory modules. Offer you two convenient and safe ways to store or transfer eight programs (maximum of 64K bytes) between MicroLogix 1000 Programmable Controllers. The memory module is located in the back of the HHP. Trace function. You can quickly find faulty input elements that prevent an output from turning on or off, saving valuable troubleshooting time. Multi-point monitor. Lets you monitor your most crucial bit addresses at the same time. All 16 addresses are stored with the controller. Simple user interface. Reduces number of keystrokes when entering and monitoring programs. Small size. Makes the HHP easy to carry around and store. Global programmer. You can program in English, French, German, Italian, Spanish, and Japanese through a six language multilingual display. Textual fault messages. Gives fault code and messages in any of six languages making troubleshooting easier to perform. Graphic display. Lets you program using the familiar basic ladder logic programming symbols. Rung-based navigation. Permits easy movement through your program mm (6.78 in.) Typical Configuration Hand-Held Programmer 1761-HHP-B mm (3.01 in.) MicroLogix 1000 Programmable Controller Communication Cable (cat. no CBL-HM02) included with HHP 6-3

4 Programming Terminals (Dedicated) SLC 500 Hand-held Terminal (Cat. No PT1) Specifications Power source Power supply loading Communication Dimensions (H W D) Weight Class I Div 2 Hazardous On line: from processor Off line: from stand-alone power supply 24V dc (2.52W) DH mm ( in) 0.62 kg (1.37 lb) Use the SLC 500 Hand-held Terminal (HHT) to enter, edit, and monitor a user program. The HHT connects directly to a SLC 500 fixed I/O controller, 5/01, or 5/02 processor for online development. You can also use the HHT for offline development, in which case, you need to have a separate 24V power supply. The HHT thrives in an industrial environment. The keypad provides tactile feedback when the keys are depressed and is sealed to guard against liquid spills. The HHT display can easily be read from approximately 1m (3 ft) away. Powerful zoom feature for immediate access to specific instruction data Complete data monitoring and data programming lets you scroll through all files Easy system configuration lets you select the actual catalog numbers of the components in your system Accessories Product Hand-held Terminal includes 6 ft (1.8m) cable. Note: Does not include battery Memory Pak, English version (must be ordered with each HHT) Wall Mount Power Supply (120V ac input) unregulated (for remote off-line programming) Global Desk Top Power Supply (85/285V ac input) regulated (for remote off-line programming) Carrying case for HHT Battery (for RAM memory retention) Catalog Number 1747-PT PTA1E 1747-NP NP PT1CC 1747-BA 6-4

5 RSTune PID Loop Tuner Software (Cat. No D) RSTune PID Loop Tuner Software is a Microsoft Windows-based application designed to make the tuning of your critical PID loops fast, easy, and accurate. RSTune software removes the delay and takes the guesswork out of loop tuning by providing seamless connectivity to the desired loop via DDE. Just locate the loop to be tuned and use the easy-to-use AutoTune Sequence. Filtering. RSTune software gives you the ability to test various filters on your process variables. Determine which filter you would like to use. Click OK and instantly see the effect the change would have on the PID tuning. AutoTune Sequence. The AutoTune sequence of RSTune software lets you simply answer questions as you are prompted to tune your loop. Point-and-click to create new controller setpoints, download with a simple click of the mouse, and your loop is tuned. RSTune software helps you to: - Optimize your control loops - Reduce the time required to tune a loop from hours to minutes per loop - Reduce product waste and rework Faceplate and Trend. RSTune software lets you select the Load PID Tuning. Select from Fastest, Fast, Slow, or Setpoint (Lambda) PID loop tuning categories. Test various settings prior to downloading them while in simulation. Read the performance increase obtained by tuning your loop and choose Download if the settings generated are your desired settings. Context-sensitive Help. RSTune software provides online, context-sensitive Help. Simply click on the topic/field you would like help on and press [F1] or click on the Help button, and the RSTune help window will display the desired information. Analysis. RSTune software s Analysis button will provide access to powerful diagnostic windows: - Modeling: Select one of four different model types. - Simulation: Perform What If analysis while offline from your process to see how your process response will change with the suggested settings prior to downloading a new setting to your loop controller. - Frequency Response: Show both the actual and the desired model values to view comparisons of controller settings using Frequency Response displays - Robustness Plot: View a graphical display of the tradeoffs between tuning and stability using Robustness Plotting. The tighter you choose to tune the loop, the less stable the loop. Windows 95 Windows NT 1 486/66MHz personal computer (Rockwell Softwre recommends a Pentium) 8M bytes RAM (Rockwell Software recommends 16M bytes) 8M bytes of hard-disk space VGA Graphics Adapter (Rockwell Software recommends ) Any Windows-compatible pointing device 486/66MHz personal computer (Rockwell Softwre recommends a Pentium) 12M bytes RAM (Rockwell Software recommends 16M bytes) 8M bytes of hard-disk space VGA Graphics Adapter (Rockwell Software recommends ) Any Windows-compatible pointing device 1 Important: If you are using the Windows NT operating system, you also need RSLinx software. 6-5

6 RSLogix 500 Programming Software (Cat. No RL0300END, -RL0100END) Easy Communication Configuration when you re offline and have communication with a specific processor, you can automatically read your I/O configuration with the click of a button, thus reducing the possibility of placement error or incorrect module selection. You can drag and drop a module from an all-inclusive list to assign it a slot in your configuration Powerful Database Editor lets you build and classify groups of symbols so that you can easily select portions of your recorded documentation and reuse it from project to project. Your documentation is only limited by the size of your hard disk Compatibility RSLogix 500 Programming Software (cat. no RL0300END) is a 32-bit Windows ladder logic programming package for the SLC 500 and the MicroLogix 1000 processors. Operating in the Microsoft Windows 95 and Windows NT environment, RSLogix 500 software incorporates state-of-the-art technology to help you maximize performance, save time, and improve productivity. RSLogix 500 Starter Programming Software (cat. no RL0100END) is also available. Intuitive Windows Interface Flexible Communication with RSLinx or Wintelligent LINX products - With RSLogix 500 Starter Programming Software you can communicate via A-B DF1 full-duplex protocol, or with DH-485 serial drivers or with RSEmulate 500 emulation driver. Online editing of the SLC 5/03 and 5/04 processors (not supported by RSLogix 500 Starter Programming Software) Consolidated Project View all project information is displayed as a project tree, providing easy point and click accessibility Diagnostics and Troubleshooting Tools diagnose the interaction of output instructions within a section of your program by viewing them at the same time - Tabbed Status Displays - Ladder View Options - Custom Display Monitor (not supported by RSLogix 500 Starter Programming Software) Flexible Ladder Editor - the syntax doesn t have to be exact when entering instructions RSLogix Software is compatible with programs created in any Rockwell Software DOS-based programming package making program maintenance across platforms convenient and easy. PLC-500 A.I. Series Programming Software Advanced Programming Software MicroLogix 1000 A.I. Series Software MicroLogix Programming Software Ordering Information Local Language Versions RSLogix Software Cat. Nos. RSLogix Starter Software Cat. Nos. English 9324-RL0300END 9324-RL0100END French 9324-RL0300FRD 9324-RL0100FRD German 9324-RL0300DED 9324-RL0100DED Spanish 9324-RL0300ESD 9324-RL0100ESD Italian 9324-RL0300ITD 9324-RL0100ITD Windows /66MHz personal computer (Rockwell Softwre recommends a Pentium) 8M bytes RAM (Rockwell Software recommends 16M bytes) 8M bytes of hard-disk space VGA Graphics Adapter (Rockwell Software recommends ) Any Windows-compatible pointing device Windows NT 486/66MHz personal computer (Rockwell Softwre recommends a Pentium) 12M bytes RAM (Rockwell Software recommends 16M bytes) 8M bytes of hard-disk space VGA Graphics Adapter (Rockwell Software recommends ) Any Windows-compatible pointing device Drag and Drop Editing quickly move instructions from rung to rung within a project, rungs from one subroutine or project to another or data table elements from one data file to another ASCII Editor - speeds project development by letting you type in instruction mnemonics. RSLogix software creates the rung 6-6

7 PLC-500 A.I. Series Programming Software (Cat. Nos S5300D, -S5500D, -S5250D, 9343-S5200D) Full Offline & Online support for the SLC 5/03, 5/04 and MicroLogix 1000 processors Modem Support Visual Branching WlNtelligent LlNX and RSEmulate 500 Support Configurable Custom Data Display Screen Size Optional Software (PLC-500 A.I. Series Processor Emulation, PID Logistics for PLC-500 A.I. Series, RSLinx, WINtelligent LINX, and RSEmulate 500 software) PLC-500 A.l. Series is an easy-to-use, menu- and function-key driven software package for programming both the Allen-Bradley SLC 500 family of processors and MicroLogix 1000 processors. Use either an Allen-Bradley industrial terminal or an IBM compatible personal computer (386 or greater). The software lets you directly program: SLC 5/04 processors over the DH+ network; SLC processors via any 1784-KT card or using the 1784-PCMK card in a notebook computer; or the Micro Controller (Bulletin 1761). All nodes (e.g., PLC-5, -5/250, PLC-3, PLC-2, and SLC 5/04 processors) on the DH+ network are visible from the WHO active screen. The software s features help the beginner quickly become proficient in ladder logic development and documentation. The advanced user will find powerful editing and diagnostic tools to be great time savers during ladder program development and troubleshooting. Online and Offline modules offer complete programming, documentation, and reporting, as well as upload/download capabilities. The help system assists the user with unique features of the software, as well as specific information on the processor s instruction set. Rockwell Software also offers an A.l. Series Processor Emulation Module. Processor Emulation provides a convenient means for testing and debugging ladder logic offline on your computer. Using emulation you can troubleshoot your program one scan at a time and add breakpoints to trap unexpected program conditions. See page 6-12 for more information about A.l. Series processor emulation. For Microsoft Windows users, PLC-500 A.I. Series Software, v8.0, operates in a DOS window within Microsoft Windows so that you can run it in a multisession environment with other software packages, including 6200 software. MS-DOS v5.0 or later, Windows v3.1, or Windows 95 operating system. PLC-500 A.I. Series software can be used with: - 386/SX - NEC VERSA E Series Notebook - GATEWAY 2000 models 386DX/25, 386DX33, 486DX/33, 486DX2/50, and 486DX2/66 personal computers - Pentium PC The computer must have: 640K bytes of RAM (At least 4M bytes of extended memory is required.) 10M-byte hard-disk drive Ordering Information Description PLC-500 A.I. Series Offline Programming/Online Monitoring Software PLC-500 A.I. Series Processor Emulation Software PLC-500 A.I. Series Complete System PID Logistics for PLC-500 A.I. Series Cat. No S5300D 9343-S5200D 9323-S5500D 9323-S5250D SLC 500 DH-485 Smart Cable for 1784-KT 9399-S5103 SLC 500 DH-485 Smart Cable for 1784-PCMK 9399-S

8 MicroLogix 1000 A.I. Series Programming Software (Cat. No MX300EN) Rockwell Software MicroLogix 1000 A.l. Series Offline Programming/Online Monitoring Software is an easy-to-use, menu- and function-key driven software package for programming the Allen-Bradley MicroLogix 1000 controllers (page 1-3). The program has been simplified to support only the Micro controllers while maintaining the feel of A.l. Ladder Logistics software. Rockwell Software features help the beginner quickly become proficient in ladder logic development and documentation. The Micro package offers complete offline programming, online monitoring, documentation, and extensive reporting features as well as upload/download capabilities. Find Baud/Parity functionality is included to assist the user in quickly establishing communication with the MicroLogix processor. The context-sensitive help assists the user with unique software features, as well as specific information on the Micro instruction set. Modem support ( A.l.Term is included) Visual Branching Sequencer Display Screen and Reports High-Resolution screen-display modes Short addressing Binary address display modes of /Bit or Word/Bit I/O bit address display modes of Slot/Bit or Slot.Word/Bit Independent Database editor Symbolic Programming and Automatic addressing Block/Cut/Copy/Paste with address offset Command String Parser Keyboard Macros Search and Replace capabilities DOS file utilities MS-DOS v5.0 or later, Windows v3.1, or Windows 95 operating system. MicroLogix 1000 A.I. Series software can be used with: - 386/SX - NEC VERSA E Series Notebook - GATEWAY 2000 models 386DX/25, 386DX33, 486DX/33, 486DX2/50, and 486DX2/66 personal computers - Pentium PC The computer must have: 640K bytes of RAM (At least 4M bytes of extended memory is required.) 10M-byte hard-disk drive 6-8

9 PLC-5 A.I. Series Programming Software (Cat. Nos L5160D, -L5250D, 9323-L5300D, 9325-L5140D, 9341-L5200D) PLC-5 A.l. Series is an easy-to-use, menu- and function-key driven software package for programming the Allen-Bradley PLC-5 family of processors. Its features enable the beginner to quickly become proficient in ladder logic development and documentation. The advanced user will find the powerful editing and diagnostic tools to be great time savers during ladder program development and troubleshooting. Online and Offline modules offer complete programming, documentation, and reporting, as well as upload/download capabilities. The help system assists the user with unique features of the software, as well as specific information on the PLC processor s instruction set. Rockwell Software also offers an A.l. Series Processor Emulation Module. Processor Emulation provides a convenient means for testing and debugging ladder logic offline on your computer. Using emulation you can troubleshoot your program one scan at a time and add breakpoints to trap unexpected program conditions. MS-DOS v5.0 or later, Windows v3.1, or Windows 95 operating system. PLC-5 A.I. Series software can be used with: - 386/SX - NEC VERSA E Series Notebook - GATEWAY 2000 models 386DX/25, 386DX33, 486DX/33, 486DX2/50, and 486DX2/66 personal computers - Pentium PC The computer must have: 640K bytes of RAM (At least 4M bytes of extended memory is required.) 10M-byte hard-disk drive Ordering Information Displaying of cross-reference information from the data table Offline & online data table usage reports Extended memory support 1771 N-Series analog module support Partial download Select specific program or data table files to be downloaded instead of a complete ladder program Sequencer display screens and reports WlNtelligent LlNX and RSEmulate 5 support Visual Branching Configurable Custom Data Display Screen Size SFC and Structured Text Programming Optional Software (PLC-5 A.I. Series Processor Emulation, PID Logistics for PLC-5, WINtelligent LINX, RSLinx, and RSEmulate 5 software) Description PLC-5 A.I. Series Offline Programming Software PLC-5 A.I. Series Online Programming Software PLC-5 A.I. Series Offline/Online Programming Software PLC-5 A.I. Series Processor Emulation Software PID Logistics for PLC-5 A.I. Series Software Cat. No L5140D 9321-L5160D 9323-L5300D 9341-L5200D 9321-L5250D 6-9

10 WINtelligent LOGIC 5 Software (Cat. Nos WL5300D, 9325-WL5140D, -WL5500D) Rockwell Software WINtelligent LOGIC 5 Software is a Microsoft Windows-based (v3.1) ladder logic development and maintenance software for A-B PLC-5 processors. You can program using a mouse or other pointing device as your primary interface. The LOGIC 5 program and display settings are completely configurable, so that you can customize the look and function of your programming tools. WINtelligent LOGIC 5 uses the same ladder logic and database formats as Rockwell Software PLC-5 A.I. Series Ladder Logistics software (page 6-9). No conversions are necessary when using both WINtelligent LOGIC 5 and PLC-5 A.I. Series software. Automatic addressing lets you instantly address your logic as you create it. When you place an instruction, WINtelligent LOGIC 5 automatically places an address into the instruction. WINtelligent LOGIC 5 supports the basic Windows editing techniques, such as cut, copy, and paste. Power programming features include: Palettes for selecting instructions and addresses from a single, central location Graphic I/O configuration utility Automatic addressing for instructions Automatic placement of block-transfer instructions for block-transfer modules Multiple data table displays Separate database editor in spreadsheet form Toolbars and icons that let you quickly select commonly used features WINtelligent LOGIC 5 software makes editing ladder logic as simple as pointing and clicking your mouse because it includes: Mouse-based editing lets you access virtually all functions through icons. Cut, copy, and paste instructions and rungs of ladder logic from one program to another as easily as copying a sentence from one word processor document to another Mouse-based addressing as you place an instruction, the software prompts you with a list of the available data table files, allowing you to select the address quickly Symbolic addressing lets you substitute any 15-character word or phrase for addresses, simplifying the process of placing addresses in instructions and helping you troubleshoot your logic Graphical I/O configuration gives you a visual display of your I/O racks with a simple spreadsheet form for defining and configuring your I/O Advanced diagnostics a troubleshooting feature that uses page titles to segment your ladder logic so that you can use advanced diagnostics to quickly locate the outputs in a particular section of your ladder logic Communication WINtelligent LOGIC 5 software accesses WINtelligent LINX products directly giving you a quick interface into online communication and allowing you to configure your communication hardware once for all Rockwell Software WINtelligent Series applications Program documentation you can have WINtelligent LOGIC 5 software prompt you for instruction descriptions as you edit ladder logic or when you re finished editing Search and replace functions let you easily locate and replace addresses and description text. The powerful searching features allow easy troubleshooting, and the replace feature helps you when reconfiguring I/O and when using a ladder program for a different project Search and cross-reference features let you search for the instances of a particular address, instruction, instruction description, symbol, rung comment, or page title Custom screen displays let you display up to 220 addresses (binary, integer, hexadecimal, octal, BCD, floating point, ASCII, and string) from anywhere in the data table and display them on a single screen 6-10

11 WINtelligent LOGIC 5 Software (Cat. Nos WL5300D, 9325-WL5140D, -WL5500D) Timing charts strip chart displays that let you monitor the timing and sequence of discrete addresses in your PLC-5 processor (up to 16 stations at a time) Library functions let you save commonly-used blocks of ladder logic to disk files and then use them in other ladder logic programs. When importing a library file, you can change addresses in the file before it imports Reporting select which reports you want to print and configure many of the reports to suit your needs Security functions let you restrict access to your PLC-5 program to only users with a password for the system Microsoft Windows, v3.1, or Windows 95 operating system. Ordering Information Description WINtelligent LOGIC 5 offline/online programming software WINtelligent LOGIC 5 offline programming software WINtelligent LOGIC 5/RSEmulate 5 bundle Cat. No WL5300D 9325-WL5140D 9325-WL5500D 6-11

12 RSEmulate 5 and RSEmulate 500 Software (Cat. Nos WE5200D, -WE0200D, 9324-RL0350END, 9325-WL5500D) Rockwell Software RSEmulate 5 and RSEmulate 500 software are Windows-based programs that let you simulate a running PLC-5 or SLC 500 processor on your computer for debugging. Through WINtelligent LINX (page 5-51) or RSLinx (page 5-53) software, you can send the results of the emulation to other Rockwell Software applications as if they were communicating to an actual PLC-5 or SLC 500 processor. RSEmulate 5 and RSEmulate 500 software can also simulate several PLC-5 or SLC 500 processors simultaneously, allowing you to simulate multiple PLC environments such as WINtelligent VIEW (page 7-64) or RSView (page 7-62) operator interfaces. RSEmulate 5 and RSEmulate 500 software appear to other Rockwell Software packages as if they were actual PLC-5 or SLC 500 processors, so you can go online with the emulated ladder project, run your operator interface, and perform any other operations on the emulated project Easy-to-use debugging controls that let you start, stop, and test your PLC-5 or SLC 500 program - Run programs continuously one program scan at a time or one rung at a time - Set breakpoints to stop program execution on any given rung and you can control whether the break occurs when the rung is true, false, or just when the rung is executed - If you re using ASCII instructions to communicate with serial devices, such as terminals or printers, the channel 0 emulation feature lets you debug those parts of your ladder program also Windows v3.11 with Win32s, Windows 95, or Windows NT operating system. Ordering Information Description RSEmulate 5, PLC-5 Processor Emulation RSEmulate 500, SLC 500 Processor Emulation RSLogix 500 and RSEmulate 500 Software bundle WINtelligent LOGIC 5/ RSEmulate 5 Bundle Cat. No WE5200D 9310-WE0200D 9324-RL0350END 9325-WL5500D 6-12

13 ApplicationBuilder Software (Cat. No SAB) ApplicationBuilder Software is Windows-based software that lets you configure SLC systems by customizing, creating, and merging Software Application Modules (SAMs) using existing ladder files. SAMs are building blocks used to create a complete control system. You can quickly and efficiently merge Allen-Bradley SAMs, such as Clutch/Brake software (cat. no SCB), with standard software modules developed by SIs, OEMs, and end users. ApplicationBuilder software merges, checks, downloads, locks, verifies a clutch brake program, and creates an archive file. Once programmed, changes to the logic are only possible through erasing and reburning the PROM. An Allen-Bradley SAM Contains: Raw segments of ladder logic needed to create the final ladder logic code Program description: Windows-based software simplifies ladder logic programming by assembling pre-written software modules into a single program Enables software options to be quickly and efficiently programmed through the use of Object Linking and Embedding (OLE) Helps bring the benefits of object-oriented programming to the ladder logic developer Makes software standardization easier to achieve Locks the SLC processor against direct edits to ladder logic Merges your own auxiliary ladder logic with A-B supplied Clutch/Brake software When used with A-B Clutch/Brake software (cat. no SCB), you can choose desired options, such as resolvers or cam switches, armed continuous or stroke-and-a-half method to start continuous stroking You can use ApplicationBuilder software as a stand-alone software package for cutting and pasting SLC ladder logic programs i386sx 20 MHz microprocessor with Windows operating system, v3.1 or later, installed SLC 5/03 or 5/04 processor ApplicationBuilder software requires the use of APS Software, v5.0 or later For more information on SAMs, which are available from Application Programs, see page Default data table values (memory locations) Ladder default locations (program file #) Listing of standard I/O modules for this software OLE (Object Linking and Embedding) executable containing the C code used by the press control builder: Configuration options or questions and answers pertinent to this module 6-13

14 Diagnostics and Maintenance Software ControlGuardian and ControlGuardian Archiver5 Software (Cat. Nos CC, -A5) To support your programmable devices, you need a tool to manage and archive PLC program and documentation files. Rockwell Software, Inc. offers ControlGuardian software, which automatically detects data changes and archives programs. It provides you the tools to create master libraries, customize reports, manage multiple file generations, and secure program and documentation files for Allen-Bradley PLC-2, PLC-3, PLC-5, and SLC 500 processors and application files for PanelView 1200 operator terminals. ControlGuardian software (cat. no CC) and ControlGuardian Archiver5 software (cat. no A5) are both PC-based DOS applications. ControlGuardian Software lets you manage and archive processor programs. You can monitor PLC processors for program changes by automatically uploading and comparing programs at a pre-determined time with programs in a master library. You can also save multiple versions of program and documentation files. ControlGuardian Archiver5 Software supports backup and restoration of A-B PLC-5 processors and is designed for customers that require automatic backup and recovery capabilities for all of their PLC-5 processors on a single network. Processors supported (formats) PLC-5 processors (.X5) PLC-3 processors (.ACH,.VDI) PLC-2 processors (.DA1,.LAD) SLC 500 (.ACH) PanelView 1200 operator terminals (PLC-5 passthrough to.apl) Hardware IBM compatible computer 386 or 486 Operating System Hard Disk Space Network Software for networked computer retrieval Printer Interface Communication Devices MS-DOS v5.0 or later (Rockwell Software recommends the current version) Windows, v3.1 or later Windows 95 Windows NT K bytes free RAM and 6M bytes of hard disk space DEC Pathworks IBM PCNET Novell Netware parallel, serial, or ASCII disk file User-specified printer port User-specified printer templates Canon LBP-8iii Epson compatible Hewlett Packard LaserJet II 6171-IDH (Internal Data Highway Interface) 5130-RM, -KA, 5820-EI, (Pyramid Integrator Resource Manager, DH/DH+ Interface, Ethernet Interface) 1785-KA, -KE (DH/DH+ Interface, DH+/RS-232-C) 1784-PCMK, -KT2, -KT, -KL Communication Modules 1771-KG Data Highway PLC-2 RS-232-C Interface Module 1771-KE, -KF Data Highway RS-232-C Interface Modules 1770-KF2B DH/DH+ RS-232-C or RS-422A Asynchronous Interface Module COM1, COM2, or user-specified address and interrupt ICOM LAN Logistics Server, WINLINX SS 5136-SD IBM OS/2 KT For more information, see ControlGuardian Software Product Data, publication Centralized project file storage Network diagnostics and status Share archive files with programming software Archive four generations of file backups Protect against unauthorized access Multiple communication interfaces - Data Highway - Data Highway Plus - Ethernet - Remote I/O (passthrough) - Serial 6-14

15 Diagnostics and Maintenance Software PathFinder Software for PLC-5/15, -5/25, -5/30, -5/40 and -5/60 Processors (Cat. Nos. ABT-SWxxx, ABTD-1.0) Successful completion of an authorized A-B PLC-5 training course An IBM-compatible personal computer with: - an or higher microprocessor (80386SX or higher recommended) - 640K of conventional memory - one floppy disk drive capable of reading 3.5 or 5.25 high-density floppy disks - a hard-disk drive with 10M bytes of space available - MS-DOS operating system, v3.0 or later - a VGA monitor, color capability recommended Allen-Bradley PathFinder Software is an interactive software program that uses detailed graphics to guide plant-floor employees through troubleshooting, operation, and programming procedures for Allen-Bradley automation control products. PathFinder Software, available for PLC-5/15, -5/25, -5/30, -5/40 and -5/60 processors, includes: Fault Simulation Training, a package that enhances employee troubleshooting skills using animated graphics that let you walk through the activities required to troubleshoot a simulated fault condition A Job Aid package that combines popular Troubleshooting and Common Procedures Guides into colorful interactive VGA computer graphics. The troubleshooting guide provides fault solutions based on user input. The common procedures guide portion provides the commands, instructions, and procedures needed to use Allen-Bradley 6200 Series Programming Software A graphic user interface with animated troubleshooting simulations makes PathFinder troubleshooting software easy to operate, even for employees with minimal computer experience No typing is necessary any function can be accessed with keyboard arrows, an optional Microsoft compatible mouse, or any other Microsoft compatible pointing device PathFinder resources can be used in conjunction with A-B 6200 Series Software (v4.4 or later) for both programming and troubleshooting applications Registered PathFinder Software users can receive software updates, assuring that troubleshooting information is the most current available PathFinder Software is designed for graduates of a PLC-5 family Lecture/Lab course. It is not a substitute for user training. Microsoft Windows, v3.0 (optional) Recommended Options A Microsoft mouse or other Microsoft compatible pointing device Microsoft Windows operating system, v3.1 or later (for switching between PathFinder Software and 6200 Series Software, v4.4 or later) Disk-cacheing software Ordering Information Single installation Fault simulation training package Catalog number 3.5 disks * ABT-SW100 Job aid package 3.5 disks ABT-SW102 Documentation User guide (included with above two packages) ABT-SW104 Customer demo disk 3.5 disk ABTD-1.0 (available on Newlit) Upgrade packages (upgrade from job aid package to fault simulation package) 3.5 disks ABT-SW100U Site license contact GTS training services for site ABT-SW106S license ( ) * All disks are high-density 6-15

16 Product Compliance Information Programming Support Tool Products UL/CSA and CE The following products (in addition to the ones we ve already identified in this section) have UL/CSA approval and CE certification. Class I Div 2 Hazardous 1747-PT PTA1E 1785-KE 1761-HHP-B KF RM 5820-EI 1784-KT 1747-AIC 1761-HHP-B KA 6-16