Quick Installation Guide

Transcription

1 Quick Installation Guide INR Channel 6-Bay Tower Standalone NVR INR Channel 6-Bay RAID Tower Standalone NVR INR Channel 8-Bay Rackmount Standalone NVR

2

3 BEFORE YOU START Thank you for purchasing ACTi Standalone Network Video Recorder. This guide contains all the information you need to quickly set up ACTi INR server system via local interface. For detailed instructions on installation, operation and how to log in to INR as a web client, please refer to the product manuals provided on ACTi corporate website. The items below are prerequisite for installation: Network cameras Network cables Network switch Monitor (with VGA cable) USB mouse At least one ACTi-certified 3.5-inch SATA hard disk. Find the certified disk models at TABLE OF CONTENTS INR-310/320 Hardware Installation 4 Unpack / At A Glance / Hard Disk Installation Connect The Devices / Attach The Dust Cover Start-up / Create Hardware RAID (INR-320) INR-330 Hardware Installation 7 Unpack / At A Glance / Rackmount The Unit Hard Disk Installation / Connect The Devices Attach The Dust Cover / Start-up Software Installation 10 Create Disk Volumes / Log In / Create Users Select Storage Devices / Add Cameras Configure Camera Settings / Set Recording Schedule Customize Views / Validation

4 INR-310/320 HARDWARE INSTALLATION UNPACK This package contains: INR x 1 Accessories Warranty Card x 1 Printed QIG x 1 Power Cord x 1 Universal Converter x 1 AT A GLANCE System Disk Storage Disks USB Ports Power Status LED Indicator Power Button AC Power Connector 4 Standalone NVR QIG Lin-In Jack Line-Out Jack Mic-In Jack VGA Port esata Port LAN1 Port LAN2 Port USB Ports

5 HARD DISK INSTALLATION TURN OFF THIS UNIT before you move the trays. Repeat the following steps to install the disks into Storage Disk bays. Storage Disks System Disk (DO NOT REMOVE) Key Lock Hinge Tab MOUNT THE DISK Step 3 Mount the disk by locking it with supplied disk screws to the bottom of the tray. REMOVE THE TRAY Step 1 Slide the lock tab up, the hinge tab will pop out by itself. INSTALL THE TRAY Step 4 Place your thumb on the lock to push the tray into position in the chassis. Step 2 Pull the hinge tab to 90 degress from the front, and pull out the tray. Step 5 Press the hinge tab until it clicks into place. CONNECT THE DEVICES The examle below displays a network consisting of only INR, network cameras and required peripherals. Please remember to enable the DHCP service on your router for INR to obtain an IP assress automatically. Power Source Note To assign a static IP address to INR, enter Windows and configure the network settings in Network and Sharing Center. Switch VGA Monitor USB Devices esata Storage Cameras Standalone NVR QIG 5

6 START-UP 1. On the unit s front panel, press down Power Button to turn on the unit. 2. As this unit starts up, you will enter Windows logon screen. Input the password to log in as administrator. CREATE HARDWARE RAID As INR-320 supports hardware RAID configuration, you can make disk arrays using the bundled software utility. 1. On Windows Desktop, double-click on the shortcut to initialize the RAID management utility. 2. On Basic RAID Configuration tab, select a RAID type and click on Apply. 3. After the configuration is complete, the RAID information will appear. Note Before removing or inserting the hard disk trays, please make sure the unit is turned off. Moving the trays while the unit is operating can cause damage to the disk. 6 Standalone NVR QIG

7 INR-330 HARDWARE INSTALLATION UNPACK This package contains: INR x 1 Accessories Warranty Card x 1 Printed QIG x 1 Power Cord x 1 Universal Converter x 1 HDD Tray Keys Dust Cover x 1 AT A GLANCE System Disk (DO NOT REMOVE) Storage Disks Power Status LED Indicator USB Ports Power Button AC Power Connector LAN1 Port LAN2 Port Lin-In Jack Line-Out Mic-In Jack Jack VGA Port esata Port Power Switch USB Ports Standalone NVR QIG 7

8 RACKMOUNT THE UNIT This unit is designed to be mounted on a standard server rack, which occupies 2U (3.5 ) of vertical space. 1. Allow a minimum of 5 cm clearance at the front and the rear for front-to-back airflow of the unit. 2. Prepare a rack shelf rated for the unit s weight or purchase the rail kit from ACTi, and install that to support the entire unit. 3. Secure the unit onto the rack. INR Sliding Rail Kit HARD DISK INSTALLATION Make sure this unit is turned off, and insert the hard disks into the disk bays following the sequence of tray numbers. REMOVE THE TRAY Step 1 Slide the lock tab aside, and the hinge tab will pop out by itself. Step 2 Hold the tab lever and pull out the tray. MOUNT THE DISK Step 3 Loosen the two screws on the tray to remove the dummy disk. Secure the hard disk on the tray with the provided disk screws. Make sure the disk connector faces towards the SATA contacts inside the unit. INSTALL THE TRAY Step 4 Place your thumb on the lock to push the tray into position in the chassis. Step 5 Press the hinge tab until it clicks into place. 8 Standalone NVR QIG

9 CONNECT THE DEVICES The example below displays a network consisting of only INR, network cameras and required peripherals. Please remember to enable the DHCP service on your router for INR to obtain an IP assress automatically. Note Switch To assign a static IP address to INR, enter Windows and configure the network settings in Network and Sharing Center. Power Source Cameras esata Storage VGA Monitor USB Devices ATTACH THE DUST COVER After you finish configuring INR system, remember to lock the disk trays using the provided keys and attach the dust cover to the unit s front panel. Step 1 Align the left end hooks to the holes on the unit s left handle. Step 2 Press the latch and push the right end towards the unit s right handle until it clicks into place. START-UP 1. (For INR-330) On the unit s rear panel, press down the Power Switch to the side with l mark. 2. On the unit s front panel, press down Power Button to turn on the unit. 3. As this unit starts up, you will enter Windows logon screen, and input the pass word to log in as administrator. Standalone NVR QIG 9

10 SOFTWARE CONFIGURATION CREATE DISK VOLUMES Use Windows Disk Management to create disk volumes so that INR can access the available storage space. 1. In Windows Search Box, search and enter computer management. 2. Select Disk Management, right-click on a disk title and select Initialize Disk, choose GPT as the partition style and click on OK. 3. Right-click on the initialized disk and select the volume type to make a new volume. 10 Standalone NVR QIG

11 4. On New Volume Wizard window, make sure you assign the desired drive letter and give a proper label name to this volume. 5. After the volume is created, it is shown on volume list and is ready for recording. Note To make a Striped volume, a Mirrored volume or a RAID-5 volume, it is recommended to select disks of the same model and capacity. Note For detailed instructions on choosing the RAID types and troubleshooting hard disk issues, please refer to System Administrator s manual provided on ACTi Download Center at Standalone NVR QIG 11

12 LOG IN On Windows Destop, double-click on to enter NVR interface. Input the default account and password to log in. Account: admin Password: is the default password of NVR system administrator s user account. For security reasons, please remember to change it. CREATE USERS On NVR screen, click Setup button to enter Setup page and then Users tab. 1. Select User Groups, click Add to start adding a new user group. 2. Input group ID and click Apply. 3. Click on the title bar of Users panel, click Add to start adding a new user. 4. Input user s Account, Password, address and select its User Group, and then click Apply. 12 Standalone NVR QIG

13 SELECT STORAGE DRIVES 1. Go to Setup page and then Storage tab. 2. On Disk Drive List, de-select C Drive, and select other storage drives. 3. Click Apply. ADD CAMERAS 1. Go to Setup page and then Devices tab. 2. Click Add. 3. Choose a search method based on your network environment and camera brand. Search Cameras Use Search Cameras to auto-search the network for ACTi cameras, or Search ONVIF Cameras for ONVIF-compliant cameras of any brand. After selecting your desired cameras, click Apply. To find ONVIF-compliant cameras, input the correct account and passowrd first, and then click to start searching. Add Camera Manually If you are adding a camera located in another network, use Add Camera Manually. Fill in Media Type, Protocol, IP Address, HTTP Port, Account and Password. Finally, click Get Device Settings and then Apply. Standalone NVR QIG 13

14 CONFIGURE CAMERA SETTINGS 1. Go to Setup page and then Devices tab. Choose the camera from Camera List. 2. Select Basic, Video, PTZ, or Preset Tour tab to configure related settings. SET RECORDING SCHEDULE The recording service automatically starts full-time recording for a newly added camera. You can modify the recording schedule to suit your needs. 1. Go to Setup page and then Schedule tab. Select the camera from Camera List. 2. Choose a recording mode: or Schedule Recording: Records video continuously during the scheduled session. Event Recording: Records video based on specific triggers such as when a motion is deteced by the camera. 3. Drag on the time table to define the time session. 4. Click Apply. Note If you have any question during system installation, please feel free to contact our engineers via ACTi Customer Help Desk platform at 14 Standalone NVR QIG

15 CUSTOMIZE VIEWS 1. Go to Live View page. On top of the screen, click on view tool bar to create a new layout, then click to enter edit mode. 2. Select a layout style. 3. To add a camera view, pull a camera from Camera List to a channel. To add a map view, select a channel and click, upload the map, drag the lower right corner to adjust channel size. 4. On view tool bar, click to save this view. 5. You can set this view as default view by clicking on. View Tool Bar Add new view Set as default view Layout styles Edit view Save view VALIDATION To check live streaming of all channels, go to Live View page, double-click on on Camera List. To check recording, go to Playback page, and then select (double-click) a view from View List or a camera from Camera List. Drag on the time bar to see the recorded video. Standalone NVR QIG 15

16 Due to continuous product improvements, some contents may have changed from the time this documentation was printed. You can download the latest user documentation, which shall prevail over the printed version provided in the package, from