Windows 10 Clean Install Step-by-Step Guide (64bit)

Transcription

1 Windows 10 Clean Install Step-by-Step Guide (64bit) For CF-19Z Series For UT-MB5 Series For UT-MA6 Series 1

2 1. First Installing Windows Steps for installing Windows Detail procedure for installing... 4 Step1: Preparations that are necessary for installing... 4 Step2: Backup Important Data... 4 Step3: Install Windows Step4: Downloading the programs for updating and extracting to the hard drive... 5 Step5: Install drivers for Windows (1) Install Intel(R) Dynamic Platform and Thermal Framework Driver... 5 (2) Install Intel(R) Management Engine Component... 6 (3) Intel(R) Chipset Device Software... 6 (4) Install Graphics Driver... 6 (5) Install HID Drivers for Panasonic PC... 6 (6) Install System Interface Device Drivers... 6 (7) Install SD Card Controller... 6 (8) Install Fingerprint Driver... 6 (9) Install GPS Registry Patch... 7 (10) Install Wireless LAN Software... 7 (11) Install USB LAN Driver... 7 (12) Restore GPS setting in Setup Utility... 7 (13) Calibrate the screen for pen and touch... 7 (14) Install Wireless WAN Software Driver... 7 (15) Install Sound Driver... 7 Step6: Windows Update... 8 Step7: Install applications for Windows Step8: Install other applications Restrictions INDEMNIFICATION Revision history

3 1. First This document provides the steps to perform clean installing Windows 10 professional 64 bit on the following models. Before clean installing, please confirm information such as restrictions after installing Windows 10 on the web page of "Windows 10 support Evaluation Information". TOUGHBOOK CF-19Z Series TOUGHPAD UT-MB5 Series UT-MA6 Series In some cases, you should not install Windows 10. Read all the documentation before you start installing new OS. Windows 10 Support and Evaluation Information In addition, please begin installing after printing this document out beforehand. If you do not have Recovery discs, please create them before installing Windows 10. It will not be possible to create them after clean installing. For instructions of creating Recovery discs, read the [Operating Instructions]. 3

4 2. Installing Windows Steps for installing Windows 10 Please perform installing with the following steps by all means. Step 1 Step 2 Step Work contents OS environment Preparations that are necessary for installing Backup important data Step 3 Install Windows 10 Step 4 Download the programs for updating and extract to the hard drive Windows 10 Step 5 Installation of the drivers for Windows 10 Windows 10 Step 6 Windows Update Windows 10 Step 7 Installation of the applications for Windows 10 Windows 10 Step 8 Installation other applications Windows 10 Detail procedure for each step is described in 2-2. The procedure described in this guide introduces the install steps for preinstalled application and drivers Detail procedure for installing All of the steps (Downloading update programs, extracting files, and installing the drivers and applications) should be done by the same administrator account. Step1: Preparations that are necessary for installing Prepare following items before installing. AC Adaptor (Plug your PC to outlet during installation.) Battery Pack (Insert to your PC during installation.) Setup DVD-ROM for Windows 10 Pro [Models without Internal DVD drive ]External DVD drive Information of Windows 10 about the applications that you installed to your PC and the peripherals you use for your PC. Turn on the wireless switch [WIRELESS]. Please use LAN or WIRELESS LAN. Don t use WiMAX or WIRELESS WAN [CF-19 Dedicated GPS Option Installed Model] Please set [GPS] to Disabled in [Advanced]-[Serial Port Settings] in Setup Utility. Step2: Backup Important Data You should back up files that you created in the hard drive to a safe location (to external media external hard drive, memory card, re-writable DVD and so on), before upgrading to Windows 10. 4

5 Step3: Install Windows 10 Note: Make sure to follow the restrictions below until all of the procedure finishes. The AC adaptor should be connected and the fully charged battery pack should be inserted. Any peripheral equipment should not be connected unless instruction tells to do so. Make sure that [Boot] - [UEFI Boot] in Setup Utility is set to Enabled. Please note that a whole hard drive data including the Recovery partition will be lost. (1) [Models without Internal DVD drive] Connect the external DVD drive. (2) Insert the Windows 10 Setup DVD. (3) Restart the computer. When the [Panasonic] logo appears on the screen, press [F2] key to enter Setup Utility. In the [Boot Override] section, select the DVD drive that Windows 10 Setup DVD is inserted. The computer will restart. (4) When Press any key to boot from CD or DVD appears, press any key to boot from Windows 10 Setup DVD. (5) Install in accordance with the instruction on Web page of Microsoft Windows 10. Step4: Downloading the programs for updating and extracting to the hard drive 1) Download the update programs for your PC from the Support Web, and save them to the hard drive or external media (e.g. external hard drive, memory card, rewritable DVD and so on). The WWAN files are different depending on the model. So please download the files by a retrieval keyword "WWAN" of the "Keyword & Category Search". 2) Extract all of the downloaded files according to the following procedures. (1) Double-click the downloaded file. (2) At [User Account Control] screen, click [Yes]. (3) When the license agreement appears, read it carefully, and then click [Yes(Y)]. (4) The [Destination Location] screen appears. Usually you don t need to change the destination location. The default destination is [C:\util10] and [C:\util2]. Click [OK]. (5) The folder appears when extracting finishes. Close the folder. (wait for a while depending on download size.) If the message [Folder already exists. Do you want to replace it?] appears, Click [Yes]. Step5: Install drivers for Windows 10 (1) Install Intel(R) Dynamic Platform and Thermal Framework Driver 1) Open [File Explorer], and browse [C:\util10\drivers\dptf_4278] folder. 2) Right-click setup(.exe), and click [Run as administrator]. 3) Follow the message displayed and update. 4) After reboot, Open [File Explorer], and browse [C:\util10\drivers\dptf_4278] folder. 5) Double-click LPOSetting(.js). At [User Account Control] screen, click [Yes]. 5

6 (2) Install Intel(R) Management Engine Component 1) Open [File Explorer], and then browse [C:\util2\drivers\me] folder. (3) Intel(R) Chipset Device Software 1) Open [File Explorer], and browse [C:\util2\drivers\intelinf] folder. 3) Follow the message displayed and update. (4) Install Graphics Driver [CF-19] 1) Open [File Explorer], and then browse [C:\util2\drivers\genericvideo4303] folder. 2) Right-click setup(.exe), then click [Run as administrator]. 3) Follow the message displayed and install. [UT-MB5, UT-MA6] 1) Open [File Explorer], and then browse [C:\util10\drivers\video_nv] folder. 3) Follow the message displayed and install. (5) Install HID Drivers for Panasonic PC 1) Open [File Explorer], and then browse [C:\util10\drivers\phid] folder. (6) Install System Interface Device Drivers 1) Open [File Explorer], and then browse [C:\util10\drivers\sid] folder. (7) Install SD Card Controller [UT-MB5, UT-MA6 With SD card slot] 1) Open [File Explorer], and browse [C:\util2\drivers\sd_re] folder. [CF-19 With SD card slot] 1) Open [File Explorer], and browse [C:\util2\drivers\sd_ri] folder. (8) Install Fingerprint Driver [CF-19 Finger Print Reader Installed Model] 1) Open [File Explorer], and then browse [C:\util10/\drivers\fgrprint] folder. 6

7 (9) Install GPS Registry Patch [CF-19 Dedicated GPS Option Installed Model] 1) Open [File Explorer], and then browse [C:\util10\drivers\gps] folder. (10) Install Wireless LAN Software 1) In case 64bit OS, Open [File Explorer], and browse [C:\util10\drivers\wlan\Win7Plus\Win64\Install] folder. 2) Right-click silent_mwt_diswowlan(.bat), and click [Run as Administrator] (11) Install USB LAN Driver [CF-19Z] 1) Open [File Explorer], and then browse [C:\util2\drivers\ex-lan\smsc] folder. 2) Right-click Pinstall(.bat), and click [Run as Administrator]. 4) Open [File Explorer], and then browse [C:\util2\drivers\ex-lan\moschip] folder. 5) Right-click Pinstall(.bat), and click [Run as Administrator]. 6) Command prompt window will be displayed, wait until it is closed (12) Restore GPS setting in Setup Utility [CF-19Z Dedicated GPS Option Installed Model] If you disabled GPS in Setup Utility at Step 1, please set [GPS] back to Auto in [Advanced]-[Serial Port Settings] in Setup Utility. (13) Calibrate the screen for pen and touch [Models with Touch Screen] 1) Open [Control Panel]. 2) Select [Hardware and Sound] [Tablet PC Settings] [Calibrate]. 3) When User Account Control screen appears, click [Yes]. 4) Follow the on-screen instructions to calibrate the touch screen. (14) Install Wireless WAN Software Driver [Models with Wireless WAN F5521gw] 1) Open [File Explorer], and browse [C:\util10\drivers\wwan_07] folder. 2) Right-click setup(.exe), and click [Run as Administrator] 3) Follow the message displayed and install. (15) Install Sound Driver 1) Open [File Explorer], and then browse [C:\util2\drivers\sound] folder. 3) Follow the message displayed and install, then restart computer. 7

8 Step6: Windows Update (1) Click Start button, then select [Settings] - [Update & Security] - [Windows Update] (2) Click [Check for updates]. Step7: Install applications for Windows 10 For the following applications, install Windows 10 versions. (Install applications under [C:\util10] folder) Applications that are not mandatory, please install the ones you use. If the file path does not exist, that application is not available for your model. Application File Path Mandatory Common Components for Panasonic PC (x64) c:\util10\pcomn64 Common Components for Panasonic PC c:\util10\pcommon PC Information Viewer c:\util10\pcinfo Pen calibration data apply tool c:\util10\pencal UT-MB5,UT-MA6 Touch Screen Control Panel C:\util2\tscp UT-MB5, UT-MA6 TPNDetector C:\util2\tpndet UT-MB5, UT-MA6 Procedure: Install applications 1) Open [File Explorer], and the browse each file path. 2) Right-click setup(.exe) and click [Run as Administrator]. If there are two or more files which names are Setup, right-click the file of witch type is Application. 3) Follow the message displayed and install. Step8: Install other applications You can use other applications as follows. (Install applications under [C:\util2] folder) Applications that are not mandatory, please install the ones you use. If the file path does not exist, that application is not available for your model. Application File Path Mandatory Recommended System Interface Manager c:\util2\sysifman System Session Manage c:\util2\pnotif Wireless Tool Box c:\util2\wtoolbox Display Rotation Tool c:\util2\disprot Dashboard for Panasonic PC c:\util2\dboard19 CF-19 Dashboard for Panasonic PC c:\util2\dboard UT-MB5,UT-MA6 8

9 3. Restrictions 3-1. INDEMNIFICATION Panasonic Corporation shall assume no indemnity obligation to the customers, hold harmless Panasonic Corporation and its subsidiaries, affiliates, directors, officers, employees, agents and independent contractors retained by Panasonic Corporation from and against any loss, cost, liability or expense (including, but not limited to, court costs and reasonable fees of attorneys and other professionals) arising out of or resulting from any use of this utility or any claim against the customers from the third party Revision history Jul. 28, 2016 : First Version Aug. 4, 2016 : 2nd Version 9