How to download EDS Data Using a Cable on Windows for PW305A/B
|
|
- Linda Knight
- 5 years ago
- Views:
Transcription
1 How to download EDS Data Using a Cable on Windows for PW305A/B Please note that a download using a cable can take up to 30 min and a power source for the laptop should be available to back up the laptop battery. 1 Cable Connection The female end of the cable is connected to the serial port at the rear of the laptop and the male end connects to the J2 port EDU For downloading from the EDU (instructions in section 2 and 3 below), the cable must be connected to Control Display unit in the tail avionic compartment With APU Without APU For downloading from the CDU in the cockpit (instructions in section 5 below), the cable must be connected to female EIA-232-D J2 connector on the front panel on the CDU. Learjet 60 Maintenance Technologies 1 of 9
2 2 GBSLite EDU Download (Preferred method) This method is the most simple. It allows the user to automatically record the session The following procedure will take around 30 min to download Steps Action Expected Results 1 Start GBSLite 2 Connect the Cable to the Control Display unit in the tail avionic compartment 3 Select PW305A or PW305B model 4 Click on Download EDU 5 Wait Until the download is completed (approx 30 min) 6 The download data is automatically converted and opened in GBSLite for analysis Maintenance Technologies 2 of 9
3 3 Hyper Terminal EDU download (Alternate method) The following procedure will take around 30 min to download 3.1 Configuring Hyper Terminal for WINDOWS 95/NT/2000/XP user Note: Windows Vista do not include a Terminal Emulation by default, we recommend using GBSLite The Following steps or for users without GBSLite Steps Actions Expected Results 1 Open Hyperterminal: 1. START 2. Programs 3. Accessories 4. Communications 5. Hyper Terminal 2 In the Connection Description box: Type in EDS as a Name and choose an Icon of your choice Thank Press OK 3 In the Connect Using Box pull down the arrow Select your COM port number Maintenance Technologies 3 of 9
4 4 In the COM1 Properties Box: Bits Per Second: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: Xon/Xoff Then press OK 5 The next time you need to do a download, just go to Start, Programs, Accessories, Hyper terminal and choose EDS.ht from the menu. 6 Connect the Cable to the EDU 7 From the Hypert Terminal Menu, start recording your session 1. Transfer 2. Capture Text 8 Give a name to your file (60_XXX.txt if it is a Lear) (259XXX.txt if it is a Hawker) Were XXX are the last three digits of the aircraft S/N Then press OK The program is now waiting for data to be sent from the EDS. The process to send the data is outlined below Maintenance Technologies 4 of 9
5 3.2 Downloading EDU data using Hyper Terminal Steps Actions Expected Results Configure the Laptop communication (Refer to section 2) 1 2 Connect the download cable Hyper Terminal: Hit ENTER 3 Hyper Terminal: Type download 4 Maintenance Technologies 5 of 9
6 Hyper Terminal: Hit ENTER Hyper Terminal: Hit ENTER Wait Until the download is completed (approx 30 min) 8 HyperTerminal: Transfer HyperTerminal: STOP Download starts do be displayed on the screen Exit Terminal Emulation (Hyper Terminal) The download is now complete and the file can now be ed back to a PW300 Tech Rep for analysis. Maintenance Technologies 6 of 9
7 4 Flashcard CDU download (obsolete method) The following procedure will take around 30min to download Steps Actions Expected Results 1 At the EDS MAIN MENU, press to >DOWNLOAD DATA and press At the <DOWNLOAD menu, press to <DOWNLOAD (PW REQD) 2 move the cursor to >TO FLASH CARD <TO FLASH CARD > and press. <VIA MODEM > <MODEM SETUP > 3 At the menu, insert the flash card into CDU front panel J4 receptacle. INSERT FLASH CARD >PRESS <ENTER> TO CONTINUE 4 5 Press to move cursor to <PRESS <ENTER> and press. At the menu, the FLASH CARD INSERTED message will appear. FLASH CARD INSERTED >BEGIN DOWNLOAD Press to move cursor to >BEGIN DOWNLOAD. Press to start download At the menu, the ERASING FLASH CARD message will appear. To abort the flash card download, press to move the cursor to >ABORT DOWNLOAD > and press. During the DOWNLOADING DATA cycle, the REMAINING: XXXXX indicates erase progress. When the erase cycle is successfully completed, the DOWNLOADING DATA message will appear. The abort download option may also be selected if required. After the download cycle successfully completed, the DOWNLOAD COMPLETE message will appear momentarily. During the DOWNLOADING DATA cycle, the REMAINING: XXXXX indicates download progress. ERASING FLASH CARD >ABORT DOWNLOAD REMAINING: XXXXX ERASING FLASH CARD >ABORT DOWNLOAD REMAINING: XXXXX DONWLOAD COMPLETE Maintenance Technologies 7 of 9
8 13 14 If an error during flash card download occurs, a DOWNLOAD ABORTED ERROR IN TRANSFER message will appear. IF the download has been aborted, repeat step 1 to 10. When the download cycle is complete, the display will default to STATUS MENU display. DOWNLOAD ABORTED ERROR IN TRANSFER Maintenance Technologies 8 of 9
9 5 Hyper Terminal CDU Download (not recommended method) The following procedure will take around 1h30 min to download Steps Actions Expected Results 1 Connect the 9 pin male EIA-232-D cable connector into the 9 pins female EIA-232-D J2 connector on the front panel on the CDU Connect the opposite end of the RS-232 null modem cable to the personal computer male 9 pin COM connector. At the <DOWNLOAD menu, push to move the cursor to >VIA RS232/MODEM and push. At the DOWNLAOD VIA MODEM menu, push to the >ALL RECORDS option. Push. <DOWNLOAD (PW REQD) <TO FLASH CARD > <VIA RS232/MODEM > <MODEM SETUP > <DOWNLOAD VIA MODEM <LATEST RECORDS > <ALL RECORDS > MODEM CONNECTED > Set Hyper Terminal as described in section 3 Hyper Terminal EDU download (Alternate method). On the CDU, at the >BEGIN DOWNLOAD menu, push. The computer screen will show the data as it is downloaded. When the computer stops scrolling, the CDU display shows DOWNLOAD COMPLETE. Push to >BEGIN DOWNLOAD, push to return tot the <EDS MAIN MENU. From Hyper Terminal menu, select Transfer than Stop Maintenance Technologies 9 of 9
Lab Establishing a Console Connection to a Router or Switch Instructor Version
Lab 5.2.7 Establishing a Console Connection to a Router or Switch Instructor Version Objective Create a console connection from a PC to a router and switch using the proper cable Configure HyperTerminal
More informationSERVICE INSTRUCTION. Updating the firmware and software on the RCS-2
SERVICE INSTRUCTION SI-09-04.1 Replaces (SI-09-04) March 2013 SERVICE INSTRUCTION Updating the firmware and software on the RCS-2 Important Note: It is highly recommended that all parameter data be backed
More informationHawki Advanced HyperTerminal Installation Instructions
Purpose Equipment Required This document provides a Novar Controls approved procedure for connecting a Hawki Advanced to a personal computer (PC) configured as an interactive ( dumb ) terminal through
More informationUpdating Reader Firmware
SWH-xxxx Readers Updating Reader Firmware Version C0 Document Part Number UM-096 July 2012 OVERVIEW This document describes how to download new firmware to Software House SWH-4xxx readers. The procedure
More informationSCI Testers and Remote Communication: Using HyperTerminal
Testers and Remote Communication: Using HyperTerminal Introduction Programmable industrial equipment has long been a staple for automation in manufacturing environments. The capability to remotely program
More informationFSA-CU Configuration Utility Programming Guide
FSA-CU Configuration Utility Programming Guide Revision 3 October 2013 Introduction The following guide will show you the basics of the FSA-CU configuration utility program. The CU can be used with the
More informationCOMMUNICATION WITH OTHER SERIAL DEVICES
Application Bulletin: #169 Date: November 2009 BLACKBELT COMMUNICATIONS INTERFACE The setup and operation of the Sentinel BLACKBELT communication options are explained in Error! Reference source not found.,
More informationSetup and Configuration of Leased Line Modem with NxLink (Vector)
Setup and Configuration of Leased Line Modem with NxLink (Vector) IS08004 Issue 1.0 25 March 2008 Nautel Limited 10089 Peggy's Cove Road, Hackett's Cove, NS, Canada B3Z 3J4 T.877 6 nautel (628835) or +1.902.823.2233
More informationSerial to LANC Adapter User s Guide
Serial to LANC Adapter User s Guide Thank you for purchasing our controller product. The following information will help you successfully connect this controller board and get it running in your application.
More informationRetrieving Diagnostic Information
Retrieving Diagnostic Information Quick Reference Guide This document describes how to retrieve diagnostic information from an Encore Player or Server or a Premiere Server, including 1st generation Cinema
More informationInstructions for Data-Transmission from a Lovibond photometer PoolDirect / MultiDirect SpectroDirect and PC Spectro II
Instructions for Data-Transmission from a Lovibond photometer PoolDirect / MultiDirect SpectroDirect and PC Spectro II Remarks: valid for Lovibond photometers PoolDirect, MultiDirect, SpectroDirect PC
More informationOM-DLTH DATA LOGGER INSTRUCTIONS
OM-DLTH DATA LOGGER INSTRUCTIONS The OMEGA OM-DLTH Data Logger is a self-contained precision instrument for recording the temperature, humidity and dew point of the surrounding environment. The OM-DLTH
More informationUpdate Guide for Zilog 1ME Software
Update Guide for Zilog 1ME Software August 28, 2009 This installation should take between 10-20 minutes depending on hardware configurations and current software state. Section 1 STOP! Do I have a Zilog
More informationProduct Manual. 8-Port RS-232 USB to Serial Adapter Data Control Box. Coolgear, Inc. Version 1.1 September 2017 Model Number: USB-8COM
8-Port RS-232 USB to Serial Adapter Data Control Box Product Manual Coolgear, Inc. Version 1.1 September 2017 Model Number: USB-8COM 2 USB-8COM Product Manual Revision History Revision Date Author Comments
More informationOM-DLTT DATA LOGGER INSTRUCTIONS
OM-DLTT DATA LOGGER INSTRUCTIONS The OM-DLTT Data Logger is a self-contained precision instrument for recording the temperature of two independent temperature probes. Each temperature sensor is enclosed
More informationDFS/Cutter. Debugging Communication Problems
DFS/Cutter Technical Support Bulletin Debugging Communication Problems Abstract: This TSB is written to help users debug communication problems where the cutter appears to ignore everything the computer
More information4-20 ma Current Data Logger
1 4-20 ma Current Data Logger OM-DL420 DATA LOGGER INSTRUCTIONS The OMEGA OM-DL420 Data Logger is a self-contained precision instrument for recording the current in a 4 20 ma loop. The OM-DL420 can store
More informationFigure 1: ZigBee Evaluation Kit (ZEK) Contents. Figure 2: ZigBee Adapter Zb-121 and Module Zb-21
The ZigBee Evaluation Kit (ZEK) has been developed for evaluation of the ZigBee wireless solution from Amp ed RF. This demo kit utilizes Amp ed RF ZigBee Serial Adapter (AR Zb-121) board with embedded
More informationUser's Manual PLC09 Modbus Converter for PAL-AT Leak Detection System
User's Manual PLC09 Modbus Converter for PAL-AT Leak Detection System PermAlert ESP, Inc. 7720 Lehigh Ave. Niles, IL 60714 847-966-2190 2 INDEX 1.0 Introduction 4 1.1 Features 4 2.0 Installation 4 2.1
More informationIP Office Technical Tip
IP Office Technical Tip Tip Number: 288 Release Date: 10 May 2016 Region: GLOBAL Unified Communications Module V2- Firmware Upgrade This Technical Tip is to alert customers with the Unified Communications
More informationQUICK START GUIDE FOR FIRMWARE UPGRADE RS232-TO UART INTERFACE BOARD AND SOFTWARE
QUICK START GUIDE FOR FIRMWARE UPGRADE RS232-TO UART INTERFACE BOARD AND SOFTWARE DESCRIPTION RS232-TO-UART Interface board is a PC- Serial-Port-to-UART adaptor that uses a customise Toshiba application
More informationRemote Display User Manual
Remote Display User Manual 1 Contents Features... 3 Hardware Overview... 4 Quickstart Guide... 5 Android Application Operation... 6 Launching and Connecting... 6 Main Display... 7 Configuring Channels...
More informationRemote Display User Manual
Remote Display User Manual 1 Contents: Introduction - Features... 3 Hardware Overview... 4 Quick-Start Guide... 5 Android Application Operation... 6 Launching and Connecting... 6 Main Display... 7 Configuring
More informationFETALGARD LITE PLUS OPERATOR S MANUAL SUPPLEMENT ( )
FETALGARD LITE PLUS OPERATOR S MANUAL SUPPLEMENT (16-00017-01) New features have been added to FGL (Monitor Software Revision 2.xx). The following are updates to sections in the operator s manual (16-40082
More informationInstallation Instructions for: Channel Thermocouple Amplifier
Installation Instructions for: 30-2204 4 Channel Thermocouple Amplifier The Advanced Engine Management (AEM) 4 channel thermocouple amplifier revolutionizes temperature measurements by providing laboratory
More informationBluetooth/RS-232 Enhanced Data Communication
Bluetooth/RS-232 Enhanced Data Communication 9650-0307-01 Rev. E The issue date or revision level for this operation guide is shown on the front cover. ZOLL, and M Series are registered trademarks, and
More information6. Front Project RS-232 Protocol Specification
Pro 45000dp RS232 Codes Rev. 01 6. Front Project RS-232 Protocol Specification RS232 Setting Baud rate: 9600 Parity check: None Data bit: 8 Stop bit: 1 Flow Control None Minimum delay for next command:
More informationVISY-X. Technical Documentation. Cinterion MC 55 i. Edition: Version: 1 Article no.:
Technical Documentation VISY-X Edition: 2016-10 Version: 1 Article no.: 350033 FAFNIR GmbH Schnackenburgallee 149 c 22525 Hamburg Tel.: +49 / 40 / 39 82 07 0 Fax: +49 / 40 / 39 06 339 Table of contents
More informationConfiguring the Switch with the CLI-Based Setup Program
Configuring the Switch with the CLI-Based Setup Program Accessing the CLI Through Express Setup, page 1 Accessing the CLI Through the Console Port, page 1 Entering the Initial Configuration Information,
More informationConfiguring the Switch with the CLI-Based Setup Program
Configuring the Switch with the CLI-Based Setup Program This appendix contains these topics: Accessing the CLI Through Express Setup, page 1 Accessing the CLI Through the Console Port, page 1 Entering
More informationUPDATING THE FIRMWARE IN FRAME BASED MODULES...
7700/7800 MultiFrame Manual TABLE OF CONTENTS 1. OVERVIEW... 1 1.1. REQUIREMENTS... 1 1.1.1. Requirements Serial Port Upgrade Method... 1 1.1.2. Requirements FTP Upgrade Method (For VistaLINK Capable Modules
More informationPrime Capsule Portable Data Logger
Prime Capsule Portable Data Logger Note : Picture of products for reference only, holder not included. Features : - LCD Display for easy usage / Data Review - Data log can start without PC software setup
More information2001 by NEC America. All Rights Reserved. Printed in U.S.A.
These instructions are customized for the CNet Modem V.90 k bps modem (P/N D) contained in the i Modem Kit P/N 9, i Modem Kit P/N 90B, and the i and 0i Modem Kit P/N 9. The modem connected to the system
More informationQuick Start Guide Bluetooth Serial Adapter
Quick Start Guide Bluetooth Serial Adapter GBC232A PART NO. Q1375 www.iogear.com o o Package Contents 1 1 x GBC232A Bluetooth Serial Adapter 1 x RS232 Extension Cable 1 x Null Modem Adapter (Female) 1
More informationSPMS SmartPage Messaging System
A division of NESS CORPORATION PTY LTD SPMS SmartPage Messaging System INSTALLATION AND USER MANUAL SmartPage Installation and User Manual V1.4 1. Contents 1. Contents... 1 2. Overview... 2 Introduction...
More informationAPS-3 Revision Important Quick Start Guide. Typical Box Contents
APS-3 Revision 3.0.0 Important Quick Start Guide Congratulations on purchasing your new APS-3 System. This Important Quick Start Guide contains information you need to set up and begin using your APS-3.
More informationZyWALL 70. Internet Security Appliance. Quick Start Guide Version 3.62 December 2003
ZyWALL 70 Internet Security Appliance Quick Start Guide Version 3.62 December 2003 Introducing the ZyWALL The ZyWALL 70 is the ideal secure gateway for all data passing between the Internet and the LAN.
More informationUsing the NM150 with Adulticiding
Reason Adulticiding 3.5 includes support for the New Mountain NM150 Weather Station. Adulticiding fogger log point details include temperature, wind speed, and wind direction. These can be recorded from
More informationAMS COCKPIT USERS GUIDE. AMS Cockpit Version 1.1 USERS GUIDE
AMS COCKPIT USERS GUIDE Table of Contents AMS Cockpit Version 1.1 USERS GUIDE Revision Date: 1/15/2010 A d v a n c e d M i c r o S y s t e m s, I n c. w w w. s t e p c o n t r o l. c o m i Table of Contents
More informationCisco OEM Servers Cisco Logo d Cisco AON 8340-K9
Cisco OEM Servers Cisco Logo d Cisco AON 8340-K9 IMPORTANT! Service Instructions You must print and follow these instructions BEFORE taking a service call on this machine. Machine data: MT = 0159-080 IBM
More informationMini USB to RS-232 Serial Adapter DB-9 Male Converter. Product Manual. Coolgear Version 1.0 January 2018 Model Number: USBG-232MINI.
Mini USB to RS-232 Serial Adapter DB-9 Male Converter Product Manual Coolgear Version 1.0 January 2018 Model Number: USBG-232MINI 2 USBG-232MINI PRODUCT MANUAL Revision History Revision Date Author Comments
More informationUSBG-8COM-PRO 8-Port USB to RS-232, 422, 485 Auto Setup Adapter Manual. Features & Specifications. Specifications
USBG-8COM-PRO 8-Port USB to RS-232, 422, 485 Auto Setup Adapter Manual The USBG-8COM-PRO 2-Port Series Industrial I/O Adapters are advanced USB to Serial Adapters that connect to 1, 2, 4 or 8 RS- 232/422/485
More informationAltus APS3G Quick Start guide
Altus APS3G Quick Start guide Revision 1.0.1 Congratulations on purchasing your new Altus APS3G System. This Important Quick Start Guide contains information you need to set up and begin using your Altus
More informationMaestro Heritage and Echelon i.lon 100 Internet Server
Technical Application Notes Maestro Heritage and Echelon i.lon 100 Internet Server REV.00 08/07/09 Application note: How to use the Maestro Heritage with a Echelon i.lon 100 Internet Server Abstract This
More informationUSB-COMi-TB USB to Industrial Single RS-422 / 485 Adapter Manual. Specifications and Features
USB-COMi-TB USB to Industrial Single RS-422 / 485 Adapter Manual The USB-COMi-TB USB-to-Industrial Single RS-422/485 Adapter is designed to make industrial communication port expansion quick and simple.
More informationMulti-IQ. Firmware: RS232-Data Manager for UPS 4 x RS232 / 1 x LAN-Contacts flash upgradeable. User manual. (Serial Number / Seriennummer)
Version: 2016-08-18 Multi-IQ Firmware: (Serial Number / Seriennummer) RS232-Data Manager for UPS 4 x RS232 / 1 x LAN-Contacts flash upgradeable User manual MANUAL ENGLISH... 2 GENERAL PROPERTIES:... 2
More informationIVE Quick Startup Guide - OS 4.0
IVE Quick Startup Guide - OS 4.0 Initial Setup Once you receive the IVE device, unpack the IVE and connect it to a PC or Laptop using the console (null modem) cable provided with the IVE. You have to connect
More informationVEEMUX Series. SM-4X4-DVI SM-8X8-DVI DVI Video Matrix Switch Installation and Operation Manual
VEEMUX Series SM-4X4-DVI SM-8X8-DVI DVI Video Matrix Switch Installation and Operation Manual MAN114 Rev Date 10/7/2009 TRADEMARK VEEMUX is a registered trademark of Network Technologies Inc in the U.S.
More informationEasyIO 30P Firmware Flashing and Upgrading. Firmware Flashing and Upgrading
Firmware Flashing and Upgrading Document Change Log 01 st Jan 2011 Document created. 18 th April 2011 Added in FwTool v1.10.exe to document 23 th Aug 2011 Update the FwTool v1.11.exe 21 st Oct 2011 Added
More informationFirmware Upgrade for JVC projectors 2013 models (Important Pre Update Information)
Firmware Upgrade for JVC projectors 2013 models (Important Pre Update Information) Before any firmware updates can be implemented, please make sure that you have a connection to the JVC projector from
More informationph/orp Meter SD Card real-time Datalogger
User's Guide ph/orp Meter SD Card real-time Datalogger Model SDL100 Introduction Congratulations on your purchase of the Extech SDL100 ph/orp Meter, an SD Logger Series meter. This meter displays and stores
More informationRBS 6000 Commissioning Procedure
RBS 6000 Commissioning Procedure 1 Introduction This document describes step-by-step instructions for integration of a RBS 6000 series. 2 Objective This document serves the purpose of describing the procedure
More informationWRS-SST Series Wireless Sensing System Tools Technical Bulletin
WRS-SST Series Wireless Sensing System Tools Technical Bulletin WRS-SST-100, WRS-SST-101 24-10139- 16, Rev. F Part No. 24-10139-16, Rev. F Issued March 2016 Refer to the QuickLIT Web site for the most
More informationHP95LX & Hyper Terminal for Windows 2000, XP, Vista & 7. 8/4/2012 Reviewed: Aug. 2012. Overview: The HP95LX Palmtop factory transfer software may not run on the newer Windows OS Windows 7. Although comparability
More informationM40e and M160 CIP Installation Instructions
Part No. 530-005365-01 Revision 2 23 January 2002 CIP Description This document describes how to remove and replace the Connector Interface Panel (CIP) on a Juniper Networks M40e Internet router or M160
More informationModel 6812 VOLUME FLOW ANEMOMETER. User Manual. Kanomax USA, Inc. 219 Route 206 PO Box 372. Andover, NJ USA. (800) Fax: (973)
Kanomax USA, Inc. 219 Route 206 PO Box 372 Andover, New Jersey 07821 USA (800) 247-8887 Fax: (973) 786-7586 Model 6812 VOLUME FLOW ANEMOMETER User Manual www.kanomax-usa.com Copyright 2008, Kanomax USA,
More informationModel 6812 VOLUME FLOW ANEMOMETER. User Manual. 219 Route 206 Phone: PO Box 372 Fax: (973)
Model 6812 VOLUME FLOW ANEMOMETER User Manual Copyright 2008, Kanomax USA, Inc. Page 1 of 29 INTRODUCTION Congratulations on your purchase of a 6812 Digital Anemometer with Volume Calculation! You now
More informationUSER MANUAL HPS-120. About this product: Your Communications Solutions Provider
Your Communications Solutions Provider www.industrial-grade-modem.com USER MANUAL HPS-120 About this product: Industrial Grade Modems works to provide you with reliable, easy to use, wireless serial communications
More informationFirmware Release ( 32-Bit-WINDOWS version )
Firmware Release 2.51.15 ( 32-Bit-WINDOWS version ) for the Signal Generators R&S SML01, R&S SML02, R&S SML03 and R&S SMV03 This firmware version is ONLY for the models explicitly mentioned above! Do not
More informationUSER MANUAL FOR GS100/GS1003G
USER MANUAL FOR GS100/GS1003G 1 Table of Contents 1. INTRODUCTION... 3 2. FEATURES... 3 3. OPERATION... 3 4.CONNECTION DETAILS... 4 5.CONFIGURATION... 5 5.1 Hyper Terminal Setting... 5 5.2 GS100 Configuration...
More informationUSB/RS232 TO cctalk COMMUNICATION BOARD Technical Information
USB/RS232 TO cctalk COMMUNICATION BOARD Technical Information USB/RS232 to CcTalk COMMUNICATION BOARD 18/04/2016 Manual code: 81043530 ATTENTION: Read this technical manual carefully before installing
More informationApplication Bulletin
INTELLIGENT CONTROLS INC 34 SPRING HILL RD SACO ME 04072 U S A Application Bulletin 000-1351 Rev. D 1250-LTC ASCII Programming Interface Purpose: To instruct technicians in installing and using the 1250-LTC
More informationINSTRUMENTS, INC. APLICATION NOTES. FOR THE EAGLE LINE OF SOLAR CONTROLLERS
4-13-2007 INSTRUMENTS, INC. 468 Liberty Dr. Wittenberg, WI,54499, USA TEL 715-253 2801 715-445 4946 FAX 715-253 2811 APLICATION NOTES. FOR THE EAGLE LINE OF SOLAR CONTROLLERS RS232 SERIAL INTERFACE for
More informationSPL Hub TABLE OF CONTENTS SECTION 1 - DESCRIPTION...2 SECTION 2 - SPECIFICATIONS...3 SECTION 3 - INSTALLATION...4
SPL Hub TABLE OF CONTENTS SECTION 1 - DESCRIPTION... SECTION - SPECIFICATIONS... SECTION - INSTALLATION... SECTION - CONTROLS AND INDICATORS...6 SECTION - EXECUTIVE PORT...9 SECTION 6 - INTERFACE SIGNALS
More informationCisco ISE Command-Line Interface
This chapter provides information on the Cisco Identity Services Engine (Cisco ISE) command-line interface (CLI) that you can use to configure and maintain Cisco ISE. Cisco ISE Administration and Configuration
More information1. PRODUCTS AFFECTED OVERVIEW REASON FOR UPGRADE EVERTZ SERVICE CONTACT INFORMATION FIRMWARE UPGRADE...
1. PRODUCTS AFFECTED... 2 2. OVERVIEW... 2 3. REASON FOR UPGRADE... 2 3.1. FEATURE ENHANCEMENTS AVAILABLE IN RELEASE 2.6 BUILD 6... 3 4. EVERTZ SERVICE CONTACT INFORMATION... 3 5. FIRMWARE UPGRADE... 3
More informationUSER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix)
USER S MANUAL PH232Ex1 Doc No: PH232Ex1-UM-001 #1 RS-232 Serial Port to Ethernet, Terminal Server/Client IPEX (IP Electronix) Contents 1. INTRODUCTION... 3 2. SPECIFICATIONS... 3 3. PACKAGE CHECKLIST...
More informationSmartPick Service Interface Installation, Setup and Event Log Download, Windows 7 & 8
Seite: 1/14 SmartPick Service Interface Installation, Setup and Event Log Download, Windows 7 & 8 1 Introduction 2 2 Flowchart 3 3 Installation 4 3.1 Installing the USB to Serial Adapter 4 3.2 Installing
More informationWrenchman, Inc. 10K120 Interface for 2127 POS Printer Replacement. Installation and Setup Guide
Wrenchman, Inc. 10K120 Interface for 2127 POS Printer Replacement Installation and Setup Guide November 13, 2003 1 Introduction The Wrenchman 10K120 interface enables the use of an Axiohm A758 or A760
More informationVSX-60, SC-61, SC-63, SC-65, SC-67, SC-68
Manufacturer: Model Number(s): Pioneer Integration Note VSX-60, SC-61, SC-63, SC-65, SC-67, SC-68 Core Module Version: Core Module 5.8 or later required Comments: VSX-60 with FW 1-157-076-014-091 tested.
More informationP r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I S y s t e m a n d F S S e t u p G u i d e
P r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I S y s t e m a n d F S 2 0 0 4 S e t u p G u i d e Preface This setup guide will walk you through the necessary steps to setup
More information1. Purpose: This procedure details how to transfer the data log in a Medivators DSD Endoscope Reprocessor to a PC using HyperTerminal.
1. Purpose: This procedure details how to transfer the data log in a Medivators DSD Endoscope Reprocessor to a PC using HyperTerminal. 2. Scope: This applies to all DSD EDGE, DSD-201 and SSD models, and
More informationRS-232/422/485 to Copper or Fiber. Ethernet Converter. User s Manual
RS-232/422/485 to Copper or Fiber Ethernet Converter User s Manual Table Of Contents TABLE OF CONTENTS... 1 INTRODUCTION... 3 PRODUCT OVERVIEW... 3 PRODUCT FEATURES... 3 PACKING LIST... 4 LED INDICATORS...
More informationELK-IP232 INSTALLATION AND CONFIGURATION MANUAL. Ethernet to Serial Bridge /07
ELK-IP232 Ethernet to Serial Bridge INSTALLATION AND CONFIGURATION MANUAL http://www.ness.com.au email: support@ness.com.au 1/07 Table of Contents Features and Specifications...3 Basics of Networking...4
More informationVibration Meter SD Card real-time datalogger
User's Guide Vibration Meter SD Card real-time datalogger Model SDL800 Introduction Congratulations on your purchase of the Extech SDL800 Vibration Meter. This meter displays and stores vibration readings
More informationAddress Bar. Application. The space provided on a web browser that shows the addresses of websites.
Address Bar The space provided on a web browser that shows the addresses of websites. Application Computer software designed to help users perform Specific tasks. Back Button A button at the top of the
More informationAPPENDIX 1 ACCESSING MAP SYSTEMS REMOTELY
APPENDIX 1 ACCESSING MAP SYSTEMS REMOTELY INTRODUCTION The MAP System consists of a number of related software programs that are accessed initially through the System Options Menu. This entry level menu
More informationSite Ethernet Interface Installation Manual
Site Ethernet Interface Installation Manual PK XXXX 10/03 1 of 22 Second Edition A publication of Kaba Ilco, Inc. 7301 Decarie Blvd. Montreal, Quebec Canada H4P 2G7 Printed in Canada, 2002 Copyright by
More information- MANUAL FOR PC CONNECTION -
- MANUAL FOR PC CONNECTION - [STEP 1 : Software Requirements] To upload/download the channel plans or upload the stored file(s), you need both CP2102 USB to UART Bridge Controller driver and HyperTerminal
More informationQUICK REFERENCE GUIDE SEAR II CONFIGURATION AND HYPERTERMINAL SETUP Document No. SIG-QG A.1
QUICK REFERENCE GUIDE SEAR II CONFIGURATION AND HYPERTERMINAL SETUP Document No. SIG-QG-08-04-001A.1 SEAR II HyperTerminal Setup 1) Connect serial cable from PC COM port 1 to SEAR II User port. 2) Go to:
More informationSVMi-8E/SVMi-16E Installation
SVMi-8E/SVMi-16E Installation Table of Contents 1 Installing the SVMi-8E/SVMi-16E in the Phone System 3 Installing the SVMi-8E in an idcs 100 3 General 3 System Resources 3 idcs 100 Hardware Compatibility
More informationDirect Wire Downloading Set up and Troubleshooting for VISTA TURBO PANELS
Direct Wire Downloading Set up and Troubleshooting for VISTA TURBO PANELS Overview This document explains the required cable, accessories needed to direct connect to the security panel using Compass. As
More informationUSB to DB25 RS232 Adapter User Manual. Features. Windows 7/ Vista / 2003 / XP / 2000 Driver Installation
765289 USB to DB25 RS232 Adapter User Manual The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter
More informationTable of Contents. Safety Warnings 2. Introduction 4. Hardware Setup Host-side Configuration.. 6. Changing Boot Parameters.
Table of Contents Safety Warnings 2 Introduction 4 Hardware Setup.... 5 Host-side Configuration.. 6 Changing Boot Parameters. 10 Copyright 2004, Motion Engineering, Inc 1 of 15 DCR 767; Ver. C Safety Warnings
More informationZCRMZNICE01ZEMG Crimzon In-Circuit Emulator
Quick Start Guide QS006602-0408 Introduction Zilog s ZCRMZNICE01ZEMG Crimzon (ICE), shown in Figure 1, provides Crimzon chip family emulation with a Trace and Event system for program debugging using Zilog
More informationConfiguring a Sunny Boy Control With an External Modem. Technical Note
With an External Modem Technical Note Revision 1.3 August 27, 2002 Kent Sheldon Revision History 1.0 July 1, 2002 Kent Sheldon Original Release 1.1 July 10, 2002 Kent Sheldon Add USR Modem 1.2 August 16,
More informationInformation Note Boot Code Menu Guide
Information Note Boot Code Menu Guide This guide describes the boot menu facilities that are available from boot code version 1.05 onwards, on all VegaStream products. Version 0.7 27 April 2005 Page 1
More information(For IT-550) CODE : I
(For IT-550) CODE : I1000153000 INSTRUCTION MANUAL Before using the INFRARED THERMOMETER, throughly read this manual for the proper operation. After reading, keep this manual for future reference. Unauthorized
More informationHMIQDHDD Transmitter Firmware Revision Release Notes August 4th 2010 HMIQDHDD
HMIQDHDD Transmitter Firmware Revision 4.0.0.0 Release Notes August 4 th 2010 This document outlines: 1. HMIQDHDD Transmitter System Firmware Version and Compatibility 2. Important Installation Notes 3.
More informationThere are two ways to connect the Ideal Vacuum Model XG-120 Digital Vacuum Gauge: Via RS-232 Serial Port, or Ethernet.
. Thank you for purchasing the Ideal Vacuum Model Xact Gauge XG-120 Digital Vacuum Gauge. This manual will help guide you through connecting your vacuum gauge to a computer for either direct or remote
More informationEthernet Serial Server
Ethernet Serial Server Users Manual Eport-101, Eport-102, Eport-104, Eport108 1 INTRODUCTION... 1 1.1 FEATURES... 1 1.2 PRODUCT SPECIFICATIONS... 2 1.3 DEFAULT SETTINGS... 3 2 COMMUNICATION MODES... 4
More informationUser's Guide. Programmable DC Power Supply 200 Watt (40 Volts / 5 Amps) Model Introduction
User's Guide Programmable DC Power Supply 200 Watt (40 Volts / 5 Amps) Model 382280 382280 Introduction Congratulations on your purchase of the Extech 382280 Programmable DC Power Supply. This 200 watt
More informationLandCell 819 GPRS Modem. GSM GPRS Serial Cellular Data Modem
LandCell 819 GPRS Modem 819 GPRS XXX GSM GPRS Serial Cellular Data Modem Quick Start Guide 004 0003 829 February 2008 COPYRIGHT NOTICE Copyright 2008 CalAmp. All Rights Reserved. Industrial & Monitoring
More informationP r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I a n d F S X S y s t e m S e t u p G u i d e
P r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I a n d F S X S y s t e m S e t u p G u i d e (Shown with optional Garmin 430) Preface This setup guide will walk you through
More informationUser Manual. Heavy Duty Differential Pressure Manometer. Model SDL720. Additional User Manual Translations available at
User Manual Heavy Duty Differential Pressure Manometer Model SDL720 Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech SDL720 Pressure
More informationCCN-to-Ethernet Converter Installation Instructions
CCN-to-Ethernet Converter Installation Instructions Installation The CCN-to-Ethernet Converter is a device designed to enable connection of a Carrier Comfort Network (CCN) to a ComfortWORKS 5.0 or greater
More informationThis document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and
This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA 2: Routers
More informationDoug Fleenor Design, Inc. RS-232 to DMX512 Interface, 2 Generation. March 8, 2010 (Software V1.2)
Doug Fleenor Design, Inc. nd RS-232 to DMX512 Interface, 2 Generation March 8, 2010 (Software V1.2) The second generation RS-232 to DMX512 interface has numerous features beyond the original device. The
More information24-Port Gigabit with 4 Optional 10G Slots. Layer 3 Managed Stackable Switch XGS Quick Installation Guide
24-Port Gigabit with 4 Optional 10G Slots Layer 3 Managed Stackable Switch XGS3-24040 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Switch Management... 4 3. Requirements... 5 4.
More informationCENTER 521 INSTRUCTION MANUAL 4-Channel Thermocouple Data Logger (with Bluetooth) (Types K, J, T, N, E, R, S)
CENTER 521 INSTRUCTION MANUAL 4-Channel Thermocouple Data Logger (with Bluetooth) (Types K, J, T, N, E, R, S) CONTENTS 1. GENERAL DESCRIPTION... 1 2. SAFETY INFORMATION... 2 3. FEATURES... 2 4. SPECIFICATIONS...
More information