Installation and Configuration of Micro Focus Fileshare for TCP/IP in a Nutshell
|
|
- Neil Gallagher
- 5 years ago
- Views:
Transcription
1 Installation and Configuration of Micro Focus Fileshare for TCP/IP in a Nutshell This document (see also KB item 23865) gives an overview of how to get started with the Micro Focus Fileshare product on a simple Network system using the TCP/IP protocol, using a single Fileshare server on which all data files reside. Applications run on several client machines and access and share the data files on the server through Fileshare. Both and Fileshare configurations are covered. For a more detailed explanation of setting up and running CCI and Fileshare please refer to the Net Express manuals "Configuring CCI" and "Fileshare User's Guide". This document makes the following assumptions: The Fileshare server name is fsserver1. The hostname of the server machine is TESTFS and its IP address is The appropriate Net Express or Server Express Application Server (run-time) files are installed on the client systems and on the Fileshare server. Please refer to your product documentation for a list of the files, which are necessary in order to deploy a Fileshare application. Setup CCI (Common Communication Interface) Check Network Connections Fileshare uses the Micro Focus CCI product to handle the underlying communications. Test TCP/IP connections using ping. Check for DNS name support as well as dotted IP address support. It is essential that the network connections be properly setup prior to installing Fileshare. CCITCP2 Setup (see section on Direct Connection for alternative) The CCITCP2 module keeps track of all registered Fileshare servers and will return the IP address and port number of a specified server to the Fileshare client. It needs to be loaded on at least one machine on the network. (unless you are using a direct connection). Select the system on which CCITCP2.EXE should be run. Select the system on which ccitcp2 should be run. In our example this is TESTFS.
2 Run the program CCIINST.EXE on each workstation. When prompted for a Server name enter either the TCP/IP host name or the IP address of the machine on which you installed the CCITCP2.EXE program. In our example this is either TESTFS or Instead on running CCIINST.EXE you can alternatively create an environment variable called CCITCP2 which can contain the address or name of the CCITCP2 server. If applications will also be run directly on the server machine then you should run the CCIINST.EXE program on the server as well. You can leave the name blank and it will default to the current host name. You must make the following entry in the /etc/services file: mfcobol 86/udp without this entry in the /etc/services file, CCITCP2 cannot function. You must then set the environment variable CCITCP2 to the hostname or the dotted IP address of the machine on which ccitcp2 will be run. or export CCITCP2=TESTFS export CCITCP2= Start CCITCP2.EXE on the selected machine. It will be started in an MS-DOS Command Prompt window. It can then be minimized. Start ccitcp2 on the selected machine. Direct CCITCP Connection Setup If you know the hostname or dotted IP address of the server machine then you can set up a direct connection instead of using CCITCP2. On the Server machine set the following environment variable: CCITCPS_servername=MFPORT:nnnn Where servername can be any name that you choose for your Fileshare server and nnnn can be any TCP/IP port number between 2000 and that is not being used.
3 Example: SET CCITCPS_fsserver1=MFPORT:3000 export CCITCPS_fsserver1=MFPORT:3000 On the Client machines set the following environment variable: CCITCPT_servername=MFNODE:hostname,MFPORT:nnnn Where servername should correspond to the same name specified on the server, hostname can be the hostname of the machine running the server or the dotted IP address and nnnn must correspond to the same port number that was specified on the server. Example: SET CCITCPT_fsserver1=MFNODE: ,MFPORT:3000 export CCITCPT_fsserver1=MFNODE: ,MFPORT:3000 Setup Fileshare Fileshare Application Program Setup Add the compiler directive CALLFH"FHREDIR" to your program or project and rebuild your applications. Also, add the LOCK MODE IS MANUAL WITH ROLLBACK to your files SELECT statement if you wish to use transaction processing.
4 Fileshare Client Setup Create a Fileshare Client configuration file fhredir.cfg in the application program directory or in a location pointed to by the environment variable FHREDIR. Example: SET FHREDIR=c:\fhredir.cfg export FHREDIR=/fhredir.cfg tells Fileshare to look in the root directory for the configuration file named fhredir.cfg.. Options: /s Server Name to use /cm cci protocol to use (ccitcp, ccinetb, cciipx) /f filename for local access Example fhredir.cfg: /s fsserver1 /cm ccitcp /f \accounts\payroll.dat /f \transport\delivery\* -s fsserver1 -cm ccitcp -f /accounts/payroll.dat -f /transport/delivery/* This tells Fileshare to redirect all I-O requests to the server fsserver1 using TCP/IP for all files except those which are specified with the /f parameter. Files specified with the /f parameter are handled by the local file handler.
5 Fileshare Server Setup Create a Fileshare Server configuration file fs.cfg in the directory from which Fileshare is started or in a directory specified within the COBDIR environment variable. Options: /s Server Name /d Database reference file /t Timeout period /m Record size /cm cci protocol to use (ccitcp, ccinetb, cciipx) /pf Password File /tr f Activate trace option specifying a filename. /wd Working directory if started as NT Service -b Start as background process under only. Example fs.cfg: /s fsserver1 /cm ccitcp /t 120 -s fsserver1 -cm ccitcp -t 120 Starting Fileshare Start Fileshare by running the command FS. You can also pass the parameters in fs.cfg directly on the command line. Example: FS /s fsserver1 /cm ccitcp /t 120 fs -s fsserver1 -cm ccitcp -t 120
6 If you wish to run Fileshare as a background process under please refer to Chapter 7 "Fileshare on ", in the Fileshare User's Guide. If you wish to run Fileshare as an NT Service please refer to Chapter 6 section 6.8 "Running Fileshare as a NT Service" in the Fileshare User's Guide. Mapping Filenames If you are currently using or NFS drive mappings to access your data files on a server machine then you may have to remove the reference to the drive letter or make use of the Fileshare "Filename Mapping" feature. If your program specifies: SELECT TEST-FILE ASSIGN TO "G:\TEST.DAT" where the drive G: is mapped to the file server's C: drive. This was valid when accessing the file directly through drive mapping and would result in the file TEST.DAT residing in the root directory of the file server which was mapped to the G: drive. When using Fileshare the name G:\TEST.DAT would be passed to Fileshare running on the server and so the G: drive would not be valid when running from this machine. If the server machine had a different G: drive mapped to a different server then this is where Fileshare would look for the file. Where you really want Fileshare to look is in the root directory of C: on the server machine. To map a filename or string within a filename to a different filename or string then use the following commands to create a database reference file on the system where Fileshare will be running. fs /d dbase.ref /fs G:\ /af C:\ fs -d dbase.ref -fs G:\ -af / This will create a database reference file named dbase.ref if it does not already exist and will add an entry to tell Fileshare to change all occurrences of the string "G:\" within a filename to "C:\". Then when you start Fileshare you need to reference the database reference file.
7 FS /s fsserver1 /cm ccitcp /t 120 /d dbase.ref fs -s fsserver1 -cm ccitcp -t 120 -d dbase.ref All I-O requests for G:\TEST.DAT will then be mapped to C:\TEST.DAT. For more information on this please refer to Chapter 6 section 6.2 "Filename Mapping" in the Fileshare User's Guide.
Using CSC SSM with Trend Micro Damage Cleanup Services
APPENDIXD Using CSC SSM with Trend Micro Damage Cleanup Services Trend Micro InterScan for CSC SSM works with Trend Micro Damage Cleanup Services (DCS) as part of an enterprise protection strategy. The
More informationYou can access data using the FTP/SFTP protocol. This document will guide you in the procedures for configuring FTP/SFTP access.
You can access data using the FTP/SFTP protocol. This document will guide you in the procedures for configuring FTP/SFTP access. Overview of Configuring FTP/SFTP Access In order to access data using the
More informationNetwork File System (NFS)
Network File System (NFS) slide 1 References: Douglas Comer, Internetworking with TCP/IP, p430-432 Simson Garfinkel and Gene Spafford, Practical UNIX and Internet Security, p605-631 NFS is used by GNU/Linux
More informationII.1 Running a Crystal Report from Infoview
Page 1 of 9 Last Updated: September 2007 This document describes how to run a crystal report from Infoview. The basics of running a report are the same for any report, however the parameters will vary
More informationCOINS Ti Call Management System Standard Installation Instructions for Citrix Users
COINS Ti Call Management System Standard Installation Instructions for Citrix Users COINS recommends that the System Administrator or staff trained in both UNIX and Citrix installation processes perform
More informationOverview of the Cisco NCS Command-Line Interface
CHAPTER 1 Overview of the Cisco NCS -Line Interface This chapter provides an overview of how to access the Cisco Prime Network Control System (NCS) command-line interface (CLI), the different command modes,
More informationAmerican Dynamics RAID Storage System iscsi Software User s Manual
American Dynamics RAID Storage System iscsi Software User s Manual Release v2.0 April 2006 # /tmp/hello Hello, World! 3 + 4 = 7 How to Contact American Dynamics American Dynamics (800) 507-6268 or (561)
More informationTroubleshooting External Services (External Message Store, Calendar Integrations, Calendar Information for PCTRs) in Cisco Unity Connection 8.
6 CHAPTER Troubleshooting External Services (External Message Store, Calendar Integrations, Calendar Information for PCTRs) in Cisco Unity Connection 8.0 See the following sections: Troubleshooting Access
More informationGroupWise Messenger 18 Installation Guide. November 2017
GroupWise Messenger 18 Installation Guide November 2017 Legal Notice For information about legal notices, trademarks, disclaimers, warranties, export and other use restrictions, U.S. Government rights,
More informationHuman Resource Suite Instructions for Standard Installation for Citrix Users
Human Resource Suite Instructions for Standard Installation for Citrix Users COINS USA recommends that the System Administrator or staff trained in both UNIX and Citrix installation processes perform the
More informationInstalling IPM on Windows
CHAPTER 5 This chapter describes how to install the IPM server software on Windows NT, Windows 2000 Professional, or Windows 2000 Server system, and how to install the IPM client software on a Windows
More informationStep - by - Step DDOS Upgrade Guide
Page 1 Contents Step - by - Step DDOS Upgrade Guide Introduction... 2 Step 1: Pre Upgrade Preparation... 2 Step 2: Pre - Upgrade Health Check and Reboot... 6 Step 3: Upgrade DDOS... 9 Page 2 Introduction
More informationJava CAPS Creating a Simple Web Service from a JCD
Java CAPS 5.1.3 Creating a Simple Web Service from a JCD Introduction Holger Paffrath, August 2008 This tutorial shows you how to create an XML Schema definition to define the layout of your web service
More informationPrint Audit 6. Print Audit 6 Documentation Apr :07. Version: Date:
Print Audit 6 Version: Date: 37 21-Apr-2015 23:07 Table of Contents Browse Documents:..................................................... 3 Database Documentation.................................................
More informationACS 5.x: LDAP Server Configuration Example
ACS 5.x: LDAP Server Configuration Example Document ID: 113473 Contents Introduction Prerequisites Requirements Components Used Conventions Background Information Directory Service Authentication Using
More informationCICS Multi Tasking under Mainframe Express
Download Application This article demonstrates how to set up Distributed Program Linking between two CICS regions running under Mainframe Express (MFE) running on the same machine. Note: this assumes you
More information<Partner Name> <Partner Product> RSA SECURID ACCESS Implementation Guide. PingIdentity PingFederate 8
RSA SECURID ACCESS Implementation Guide PingIdentity John Sammon & Gina Salvalzo, RSA Partner Engineering Last Modified: February 27 th, 2018 Solution Summary Ping Identity
More informationNetwork File System. Network File System (NFS) NFS Advantages. Network File System Disadvantages
Network File System (NFS) slide 1 Network File System slide 2 References: Douglas Comer, Internetworking with TCP/IP, p430-432 Simson Garfinkel and Gene Spafford, Practical UNIX and Internet Security,
More informationTCP/IP Overview. Basic Networking Concepts. 09/14/11 Basic TCP/IP Networking 1
TCP/IP Overview Basic Networking Concepts 09/14/11 Basic TCP/IP Networking 1 What is TCP/IP? TCP/IP is a name refers to an entire collection of data communication protocols: TCP: Transmission Control Protocol
More informationLink Gateway Initial Configuration Manual
Link Gateway Initial Configuration Manual Copyright 2016 NetLinkz. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
More informationbs^ir^qfkd=obcib`qflk= prfqb=clo=u
bs^ir^qfkd=obcib`qflk= prfqb=clo=u cçê=u=táåççïë=póëíéãë cçê=lééåsjp=eçëíë cçê=f_j=eçëíë 14.1 bî~äì~íáåö=oéñäéåíáçå=u This guide provides a quick overview of features in Reflection X. This evaluation guide
More informationIBM Content Manager for iseries. Messages and Codes. Version 5.1 SC
IBM Content Manager for iseries Messages and Codes Version 5.1 SC27-1137-00 IBM Content Manager for iseries Messages and Codes Version 5.1 SC27-1137-00 Note Before using this information and the product
More informationIVE Quick Startup Guide - OS 4.0
IVE Quick Startup Guide - OS 4.0 Initial Setup Once you receive the IVE device, unpack the IVE and connect it to a PC or Laptop using the console (null modem) cable provided with the IVE. You have to connect
More informationEMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0)
CHAPTER 2 EMS Installation This chapter provides instructions for installing the Element Management System (EMS) software on a user workstation. Workstation Requirements The following sections list the
More informationClient Loading Instructions For ProHelp EPM, Release 7.7
Client Loading Instructions For ProHelp EPM, Release 7.7 This application note describes the steps necessary to install the ProHelp EPM, Release 7.7, client software on a workstation computer. It presumes
More informationUSING DIRECT DATABASE DRIVERS
USING DIRECT DATABASE 1 DRIVERS Overview 2 S-PLUS Commands for Importing and Exporting 3 Dialogs for Importing and Exporting 6 Import From Database 6 Export to Database 10 How Direct Data Sources are Stored
More informationEvaluation Guide Host Access Management and Security Server 12.4 SP1 ( )
Evaluation Guide Host Access Management and Security Server 12.4 SP1 (12.4.10) Legal Notice For information about legal notices, trademarks, disclaimers, warranties, export and other use restrictions,
More informationTrace Debug Tools Version 1.2 Installation Guide
Trace Debug Tools Version 1.2 Installation Guide Copyright 2000-2002 ARM Limited. All rights reserved. Proprietary Notice Words and logos marked with or are registered trademarks or trademarks owned by
More informationPre-Installation Requirement AX Installation Requires Few Pre-requisites as Below - Windows Server Operating System [ Win 2003, Win 2008 ] - Activer Directory Services / Domain Controller - Microsoft SQL
More informationDEPLOYMENT GUIDE DEPLOYING F5 WITH ORACLE ACCESS MANAGER
DEPLOYMENT GUIDE DEPLOYING F5 WITH ORACLE ACCESS MANAGER Table of Contents Table of Contents Introducing the F5 and Oracle Access Manager configuration Prerequisites and configuration notes... 1 Configuration
More informationNetwork License Manager and Client Toolchain. Installation Guide
Network License Manager and Client Toolchain Contents This guide is intended to help you to install HEW and the Network License Manager and obtain a license key (if entitled). It will cover: 1. Installing
More informationCreating Avid Projects, and Media Sharing with Small Tree TitaniumZ
When using Avid Media Composer System with Small Tree's Titanium Z storage, there are a few steps to take to share project and media files. It is important to note that While Small Tree can work in an
More informationRelativity Data Server 2.2
Relativity Data Server 2.2 Micro Focus The Lawn 22-30 Old Bath Road Newbury, Berkshire RG14 1QN UK http://www.microfocus.com Copyright Micro Focus 2009-2017. All rights reserved. MICRO FOCUS, the Micro
More informationNovell Kerberos Login Method for NMASTM
Novell Kerberos Login Method for NMASTM 1.0 ADMINISTRATION GUIDE www.novell.com Legal Notices Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation,
More informationLPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide
LPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide Rev. 02 (August, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may be reproduced in any form or by any means
More informationRadiolabs Bridge in a Box Setup
Radiolabs Bridge in a Box Setup This manual will guide you through creating a point-to-point bridge using your Radiolabs equipment. Step 1: Preparing for setup. To set the bridge up, start by unboxing
More informationCase Study. WANs. Cisco Networking Academy Program CCNA 4: WAN Technologies v3.0
Case Study WANs Cisco Networking Academy Program CCNA 4: WAN Technologies v3.0 Overview and Objectives This final case study shows you how to build and configure a complex network using the skills you
More informationPRIAM Installation Instructions 1.2.1
PRIAM Installation Instructions 1.2.1 Published 1 October 2009 Contents 1.0 Introduction... 2 1.1The PRIAM Product range... 2 1.2 Document contents... 2 2.0 Downloading PRIAM Products... 3 3.0 Installing
More informationData Warehouse Center Administration Guide
IBM DB2 Universal Database Data Warehouse Center Administration Guide Version 7 SC26-9993-00 IBM DB2 Universal Database Data Warehouse Center Administration Guide Version 7 SC26-9993-00 Before using this
More informationInstalling Cisco WebEx Social
CHAPTER 2 This chapter describes how to install Cisco WebEx Social. This chapter includes these topics: Before You Begin, page 2-1 3.1, page 2-1 Before You Begin Before you begin installation, review the
More information8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista
8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista Introduction If Vista is not available in your classroom, you may complete this lab by viewing the figures in this document. Print and
More informationApplication Note: Downloading and installing software upgrade
Application Note: Downloading and installing software upgrade The Interceptor has the capability to accept software upgrades, which are available from NIS Tech Support (support@networkintegritysystems.com),
More informationTransaction service settings
Transaction service settings Use this page to specify settings for the transaction service. The transaction service is a server runtime component that can coordinate updates to multiple resource managers
More informationSession 16 Windows 7 Professional DNS & Active Directory
Session 16 Windows 7 Professional DNS & Active Directory Fall 2011 ITE153 Operating Systems 1 Session 16 Windows 7 Professional Configuring TCP/IP Addressing & Name Resolution Fall 2011 ITE153 Operating
More informationAuthorizing the TCP/IP protocol
Authorizing the TCP/IP protocol If you purchased TCP/IP capability initially with the printer, the printer is shipped with the protocol already authorized. If you are adding TCP/IP capability to your printer,
More informationInstalling and Using Document Distributor
To view or download this or other Lexmark Document Solutions publications, click here. Installing and Using Document Distributor The Lexmark Document Distributor consists of server and client software
More informationThis chapter covers the following items: System requirements to use the program Installation instructions for the program
Installation Overview This chapter covers the following items: System requirements to use the program Installation instructions for the program System Requirements for the Program To use the program, you
More informationExtend Your Server 2003 Active Directory Schema For Windows 7 And Server 2008
Extend Your Server 2003 Active Directory Schema For Windows 7 And Server 2008 When you are using Windows Server 2003 or Windows Server 2008 32bit Active Directory promotion wizard automatically extend
More informationInstalling MySQL Subscriber Database
CHAPTER 2 This chapter describes how the optional MySQL subscriber database is installed for use with the Cisco SIP Proxy Server. An installation script, install_mysql_db, is used. This script only runs
More informationCA MIA Tape Sharing for z/vm
CA MIA Tape Sharing for z/vm Linux User Guide Release 12.0 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation
More informationUsing NAT in Overlapping Networks
Using NAT in Overlapping Networks Document ID: 13774 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Configurations Verify Troubleshoot Related Information
More informationMaintenance Tasks. About A/B Partition CHAPTER
CHAPTER 4 These topics describe the Chassis Manager maintenance tasks: About A/B Partition, page 4-1 Configuring Basic System Information, page 4-2 Configuring System Global Settings, page 4-4 Configuring
More informationFileshare Exporter Administration Guide
Motivate Systems Fileshare Exporter Administration Guide Manage hundreds of shared folders in seconds. View permissions, export/import, migrate servers, mass delete, command line access and more. Fileshare
More informationPACS. User Guide. Installing PACS on a Peer to Peer Network. pacs1.6
PACS Installing PACS on a Peer to Peer Network User Guide pacs1.6 Human Edge Software Corporation Pty Ltd 427 City Road South Melbourne Vic 3205 Support Centre: Web: http://support.humanedge.biz/ Tel:
More informationManaging Databases. Prerequisites. Information About the Database Administration Tools CHAPTER
CHAPTER 4 This chapter describes two Cisco SIP proxy server (Cisco SPS) database administration tools: The registry and routing (regroute) databases tool The MySQL database tool It contains the following
More informationSETTING UP NETWORKING FOR LOOKOUT 4.0
NOTE TO USER SETTING UP NETWORKING FOR LOOKOUT 4.0 Contents Testing TCP/IP Capability The purpose of this document is to help you with basic configuration of your computers in order to run Lookout 4. This
More informationEMC Greenplum Data Computing Appliance to x Software Upgrade Guide. Rev: A02
EMC Greenplum Data Computing Appliance 1.2.0.1 to 1.2.1.x Software Upgrade Guide Rev: A02 Copyright 2013 EMC Corporation. All rights reserved. EMC believes the information in this publication is accurate
More informationManaging External Identity Sources
CHAPTER 5 The Cisco Identity Services Engine (Cisco ISE) integrates with external identity sources to validate credentials in user authentication functions, and to retrieve group information and other
More informationMailman. Fetchmail and NT (ems3) Mailman. Fetchmail script. handles mailing lists web based and based
Fetchmail and NT (ems3) slide 1 Mailman slide 2 University mail server isems3 auser joe has an account jbloggs on corporate also maintains a film mailing list requires three accounts film@glam.ac.uk: post
More informationSpring 2017 Gabriel Kuri
Lab 2 ECE 431L Spring 2017 Gabriel Kuri This lab is made up of two parts. Part 1 will consist of familiarizing yourself with the Raspberry Pi (RPi). It includes running Unix/Linux commands to become somewhat
More informationDell FluidFS 6.0 FS8600 Appliance CLI Reference Guide
Dell FluidFS 6.0 FS8600 Appliance CLI Reference Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates
More informationConversion checklist from BusinessWorks Version 12 to Sage BusinessWorks 2017
Conversion checklist from BusinessWorks Version 12 to Sage BusinessWorks 2017 This checklist includes instructions for how to convert from BusinessWorks Version 12 to a new installation of Sage BusinessWorks
More informationHaas Machines in a Network
Haas Technical Documentation Haas Machines in a Network Scan code to get the latest version of this document Translation Available INTRODUCTION This document tells you how to configure Haas machines in
More informationBefore you start the lab exercises see the lab administrator or EEE3080F tutor to get assigned to your routers.
EEE00F Lab Basics of the Network Lab Student Lab Manual Before you start the lab exercises see the lab administrator or EEE00F tutor to get assigned to your routers. Contents. Resources used in the labs...
More informationLab 2.8.2: Challenge Static Route Configuration
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway BRANCH HQ ISP PC1 PC2 Web Server Fa0/0 S0/0/0 Fa0/0 S0/0/0 S0/0/1 209.165.201.2 255.255.255.252 Fa0/0 209.165.200.225
More informationCIMCO NFS 2008 for Windows 95/98 Windows NT/2000/XP/Vista Server 2003/2008 CIMCO NFS Server Insert - 24p.indd :27:57
CIMCO NFS 2008 for Windows 95/98 Windows NT/2000/XP/Vista Server 2003/2008 Networking with NFS and CNC Machines The CIMCO NFS Server enables a CNC Machine to access the files in a shared folder on a server,
More informationUNIX RUNTIME LICENSING
UNIX RUNTIME LICENSING This article gives a general overview of UNIX runtime licensing and its implications. When you have developed an application using Server Express, you run it under Micro Focus Server
More informationCisco Secure ACS 3.0+ Quick Start Guide. Copyright , CRYPTOCard Corporation, All Rights Reserved
Cisco Secure ACS 3.0+ Quick Start Guide Copyright 2004-2005, CRYPTOCard Corporation, All Rights Reserved. 2005.05.06 http://www.cryptocard.com Table of Contents OVERVIEW... 1 CONFIGURING THE EXTERNAL
More informationUpdating Users. Updating Users CHAPTER
CHAPTER 18 Update the existing user information that is in the database by using the following procedure:, page 18-1 Retaining Stored Values, page 18-2 Using the BAT Spreadsheet to Create a CSV Data File
More informationEndian Proxy / Firewall
Endian Proxy / Firewall Created October 27, 2006 by Bruce A. Westbrook Revisions: Introduction This document describes the step by step process of installing and configuring the Endian Firewall, Community
More informationMobile Operating Systems Lesson 04 PalmOS Part 2
Mobile Operating Systems Lesson 04 PalmOS Part 2 Oxford University Press 2007. All rights reserved. 1 PalmOS Memory Support Assumes that there is a 256 MB memory card(s) The card RAM, ROM, and flash memories
More informationMCSA Guide to Networking with Windows Server 2016, Exam
MCSA Guide to Networking with Windows Server 2016, Exam 70-741 First Edition Chapter 7 Implementing Network Policy Server 2018 Cengage. All Rights Reserved. May not be copied, scanned, or duplicated, in
More informationBEG 6. 50p. Getting Started with the Emacs Screen Editor. An introduction to the Emacs screen editor, which is available on Unix systems.
Getting Started with the Emacs Screen Editor An introduction to the Emacs screen editor, which is available on Unix systems. AUTHOR Information Systems Services University of Leeds DATE March 2000 EDITION
More informationPrimoPDF Enterprise User Guide, Version 5.0
Table of Contents Installation... 3 Reference Links... 3 Uninstallation... 4 Creating PDF Documents... 4 PrimoPDF Document Settings... 5 PDF Creation Profiles... 5 Document Properties... 6 PDF Security...
More informationApplication Note: Installing Remote Management Agents Using Service Account Manager Rev 2 June 1, 2006
Application Note: Installing Remote Management Agents Using Service Account Manager Rev 2 June 1, 2006 Lieberman Software Corporation http://www.liebsoft.com Abstract The Microsoft Windows Server Resource
More informationFieldView. Management Suite
FieldView The FieldView Management Suite (FMS) system allows administrators to view the status of remote FieldView System endpoints, create and apply system configurations, and manage and apply remote
More informationSIOS Protection Suite for Linux v9.0. Samba Recovery Kit Administration Guide
SIOS Protection Suite for Linux v9.0 Samba Recovery Kit Administration Guide Sep 2015 This document and the information herein is the property of SIOS Technology Corp. (previously known as SteelEye Technology,
More informationTME 10 Reporter Release Notes
TME 10 Reporter Release Notes Version 2.0 April, 1997 TME 10 Reporter (April 1997) Copyright Notice Copyright 1991, 1997 by Tivoli Systems, an IBM Company, including this documentation and all software.
More informationPrimoPDF User Guide, Version 5.0
Table of Contents Getting Started... 3 Installing PrimoPDF... 3 Reference Links... 4 Uninstallation... 5 Creating PDF Documents... 5 PrimoPDF Document Settings... 6 PDF Creation Profiles... 6 Document
More informationConfiguring a Cisco Secure IDS Sensor in CSPM
Configuring a Cisco Secure IDS Sensor in CSPM Document ID: 6117 Contents Introduction Prerequisites Requirements Components Used Conventions Configuration Define the Network on Which the CSPM Host Resides
More informationQedit 5.7 for HP-UX. Change Notice. by Robelle Solutions Technology Inc.
Qedit 5.7 for HP-UX Change Notice by Robelle Solutions Technology Inc. Program and manual copyright 1977-2005 Robelle Solutions Technology Inc. Permission is granted to reprint this document (but not for
More informationNetwork Quick Install Cards Document Centre 490/480/470/460 ST
Network Quick Install Cards Document Centre 490/480/470/460 ST This package contains Quick Install Cards that will help you connect the Document Centre to your network and install E-mail. Please read and
More informationLab 5.6.2: Challenge RIP Configuration
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway BRANCH HQ ISP PC1 PC2 PC3 Fa0/0 S0/0/0 Fa0/0 S0/0/0 S0/0/1 Fa0/0 S0/0/1 NIC NIC NIC Learning Objectives Upon completion
More informationVersion 6.3 Upgrade Guide
Version 6.3 Upgrade Guide Copyright 2016 Manufacturing Information Systems, Inc. 217-4 Maxham Meadow Way Woodstock, Vermont 05091 MISys and the MISys logo are registered trademarks of Manufacturing Information
More informationGeneral Ledger Export to CLIME GL-1047
General Ledger Export to CLIME GL-1047 Overview This Extended Solution to the standard MAS 90 MAS 200 General Ledger module exports General Ledger account actual and budget data to another software, CLIME.
More informationInfoblox Authenticated DHCP
Infoblox Authenticated DHCP Unified Visitor Management amigopod Technical Note Revision 1.1 5 July 2010 United States of America +1 (888) 590-0882 Europe, Middle East & Asia +34 91 766 57 22 Australia
More information-bulkmovecartridgestoanotherlogicallibrary Description: Assigns multiple cartridges at the same time instead of 1 at a time
IBM TS3310 Command Line Interface The IBM TS3310 Command Line Interface (CLI) program can be used to access the TS3310 library from a CLI. This is in addition to the TS3310 s Web User Interface. The TS3310
More informationFarstone TotalDeploy User Guide
Farstone TotalDeploy User Guide 1 Introduction to TotalDeploy...3 1.1 Overview...3 1.1.1 What is TotalDeploy...3 1.1.2 Who needs TotalDeploy?...3 1.1.3 TotalDeploy infrastructure...3 1.2 What you can do
More informationPST for Outlook Admin Guide
PST for Outlook 2013 Admin Guide Document Revision Date: Sept. 25, 2015 PST Admin for Outlook 2013 1 Populating Your Exchange Mailbox/Importing and Exporting.PST Files Use this guide to import data (Emails,
More informationDatabase Connectors Net Express/Server Express 5.1 Update 14. Release Notes
Database Connectors Net Express/Server Express 5.1 Update 14 Release Notes Micro Focus The Lawn 22-30 Old Bath Road Newbury, Berkshire RG14 1QN UK http://www.microfocus.com Copyright Micro Focus 2009-2017.
More informationCreating an authorized SSL certificate
Creating an authorized SSL certificate for MeetingSphere Meeting Center Server MeetingSphere Meeting Center Server requires an authorized SSL certificate by which its Meeting center is identified, and
More informationGetting Started with IPM
CHAPTER 2 Getting Started with IPM The chapter provides information on starting the IPM application and configuring a collector to gather response time data. It includes the following major sections: Starting
More informationFor example, the Control-M Agent for Windows 32-bit is DRKAI _windows.zip and 64-bit is DRKAI _windows_x86_64.zip.
How to create BMC Server Automation (BSA) configuration file, depot and job objects for deploying new and upgrading existing Control-M Agents on Microsoft Windows servers This document details the steps
More informationms-help://ms.technet.2004apr.1033/ad/tnoffline/prodtechnol/ad/windows2000/howto/mapcerts.htm
Page 1 of 8 Active Directory Step-by-Step Guide to Mapping Certificates to User Accounts Introduction The Windows 2000 operating system provides a rich administrative model for managing user accounts.
More informationOrbixTalk 3.3 Installation Guide Windows NT, Solaris, and HP/UX
OrbixTalk 3.3 Installation Guide Windows NT, Solaris, and HP/UX September 2000 Platforms Product Code Windows NT 4.0 (Service Pack 6a) Solaris 2.7 HP/UX 11.00 Product Code Version s1514 Windows NT 4.0
More informationWISNETWORKS. WisOS 11ac V /3/21. Software version WisOS 11ac
WISNETWORKS User Manual V1.1 2016/3/21 Software version 1.0.0021 Table of contents 1. Setup& WMI... 3 1.1 Hardware Setup... 3 1.2 Web Management Interface... 3 2. Status... 4 2.1 Overview... 4 2.1.1 System...
More informationMission Guide: GUI Windows
Mission Guide: GUI Windows Your Mission: Use F-Response to connect to a remote Windows machine Using F-Response to connect to a remote Windows machine and access one or more targets Step 1: Open and start
More informationEXPERIMENT 1. FAMILIARITY WITH DEBUG, x86 REGISTERS and MACHINE INSTRUCTIONS
EXPERIMENT 1 FAMILIARITY WITH DEBUG, x86 REGISTERS and MACHINE INSTRUCTIONS Pre-lab: This lab introduces you to a software tool known as DEBUG. Before the lab session, read the first two sections of chapter
More informationConfiguring WebConnect
CHAPTER 6 WebConnect provides seamless integration between multiple internal and external web servers through a single URL. Making use of a single database and a customer-defined rollover sequence, WebConnect
More informationNetwork Scanner Tool V3.3. User s Guide Version
Network Scanner Tool V3.3 User s Guide Version 3.3.09 Copyright 2000-2012 by SHARP CORPORATION. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
More information