Field to Finish. Surface Modeling
|
|
- Pauline Ward
- 5 years ago
- Views:
Transcription
1 New Jersey SurvCon 2014 Field to Finish And Surface Modeling with Carlson Survey Presented by
2 Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business as That CAD Girl. She is based in Raleigh, North Carolina. Jennifer has a degree in Surveying Technology and has worked for surveying and civil engineering consulting offices in North Carolina and Illinois. She also worked for an Autodesk reseller for several years and built their technical services division from the ground up. Today, That CAD Girl provides sales, support and training for Carlson, AutoCAD and IntelliCAD software and Carlson hardware and data collection. We specialize in Field to Finish, Surface Modeling, CAD standardization and Carlson Software implementation. Jennifer is one of the charter members of Carlson College which is the certified program for authorized Carlson Software trainers. Jennifer also writes the "CAD Picks and Clicks" column for Professional Surveyor Magazine and has been a featured presenter at: Autodesk University 2004 and 2007 World of Concrete/Technology for Construction 2004 and 2005 AEC Science & Technology 2005 NC Society of Surveyors Institute 2009 Carlson Software User Conference 2009, 2010, 2013 New Jersey SurvCon 2013, 2014 Maryland Society of Surveyors Fall Conference, 2013 Jennifer is a member of the Steering Committee for Version 6 of the National CAD Standard, serves as Chair of the Survey/Civil Task Team and co Chair of the CAD Layer Guidelines Task Team. The purpose of the Survey/Civil Task Team is to explore and propose changes that incorporate more civil and survey related content into the National CAD Standard. You can reach me at Jennifer@ThatCADGirl.com or (919) Carlson Self Study Manuals are available for purchase during the Carlson User Conference at a discounted price or from my online store at
3 1 Importing GIS Attributed CAD Files to Carlson Survey Importing GIS Attributed CAD Files to This document picks up from another handout, Using Esri ArcMap to Extract GIS Attributed CAD Files and requires that you start with a GIS attributed Drawing (.dwg) file that has been exported from Esri GIS software. (1 1) Open the project drawing in Carlson Survey. Although it s hard to see in the image shown below, there are very small point node entities in addition to the polyline entities. The point nodes represent the point data exported from Esri and the polylines are polyline data. (1 2) Click the down arrow to see the list of layers in the drawing. You can see that the CAD layer names correspond to the features/layers exported from Esri. (919) Page 1 of 24
4 Convert the point nodes to Carlson point block entities and save the point data to the Coordinate (.crd) file. (1 3) On the Cogo menu, click Create Points from Entities. (1 4) In the Create Points From Entities box, click the radio button to change the Description Settings to Use Entity Layer for Description. (1 5) Click OK to continue. (1 6) In the Entities To Points box, click the Points check box and make sure all other check boxes under Entities to Process are unchecked. (1 7) Select other options or settings as needed. (1 8) Click OK to continue. Page 2 of 24 (919)
5 Set the Coordinate (.crd) file into which the points will be added. Importing GIS Attributed CAD Files to (1 9) To create a new.crd file, click the New tab, set the Folder and type a new File Name or, to append to an existing file, click the Existing tab to browse to and select an existing file. (1 10) Click the Open button to continue. (919) Page 3 of 24
6 When the Open button is clicked, the Command: line prompt reads: Select arcs, circles, faces, points, text, lines and polylines. FILter/<Select entities>: (1 11) Pick two opposite corners of a window to select the entities. Page 4 of 24 (919)
7 After processing and zooming in, you can see the generic point nodes have been replaced by Carlson point block entities. Next, create a new Field Code (.fld) file that will insert typical fire hydrant and manhole symbols and assign the points and symbols to standard layers. (1 12) On the Survey menu, click Draw Field to Finish. (1 13) In the Draw Field to Finish box, click the Edit Codes button. (919) Page 5 of 24
8 (1 14) In the Field to Finish box, click the Code Table by CRD button. (1 15) When the CRD To Field Code Definitions box is displayed, click the Append button to have the new Codes added to the current.fld file or click the New button to add the Codes to a new.fld file. Page 6 of 24 (919)
9 (1 16) In the Specify Field Code Definition File box, set the Folder and type a File Name for the new.fld file. (1 17) Click the Save button to continue. (1 18) In the Field to Finish box, click the Edit button next to the Code you wish to edit. (919) Page 7 of 24
10 (1 19) In the General tab of the Edit Field Code Definition box, change settings as needed. In this example, only the Description, Main Layer, Distinct Point Layer and Attribute Layout ID have been changed. (1 20) Click the Symbol tab. (1 21) In the Symbol tab, click the Set Symbol button. Page 8 of 24 (919)
11 (1 22) Click the symbol to be inserted for this Field Code. (1 23) Click the OK button to return to the Field to Finish box. (919) Page 9 of 24
12 (1 24) To make similar changes to other Codes, click the Edit button next to the Code and repeat the steps above. (1 25) After making all necessary changes, click the Save button in the Field to Finish box. (1 26) Click the Exit button to return to the Draw Field to Finish box. Page 10 of 24 (919)
13 (1 27) Click the OK button to continue. After drawing Field to Finish, the results of the changes to the Field Codes can be seen in the drawing. (919) Page 11 of 24
14 Because the drawing is geo referenced from the Esri export, you can use the Esri ArcGIS Services Retrieve Map or Place Google Earth Image commands to insert an image. Page 12 of 24 (919)
15 2 Importing GIS Attributed CAD Files to Carlson SurvCE or SurvPC Importing GIS Attributed CAD Files to Note that the steps shown here do NOT require that you follow the steps in Part 1 of this document. Part 2 starts fresh with the original GIS attributed Drawing (.dwg) file exported directly from Esri GIS software. This exercise and screen captures use Carlson SurvPC but will also work for SurvCE. For more information about exporting files from Esri, see the handout Using Esri ArcMap to Extract GIS Attributed CAD Files. First, in SurvPC, set the Job/CRD file. (2 1) Depending on whether you need to continue the last job or start a new one, click the Continue Last Job or Select New/Existing Job button. This exercise will start with a New Job. (2 2) Set the Folder and type a Name for the new Coordinate (.crd) file. (2 3) Click the OK button to continue. (919) Page 13 of 24
16 After clicking OK, the Job Settings box is displayed. (2 4) Click the Options tab. (2 5) Click the check box next to Allow Import.dxf/.dwg (Esri) Options. (2 6) Click the OK button to return to the Main menu. (2 7) If it s not already active, click the File tab. (2 8) Click the Feature Code List button. The name of the currently loaded Feature Code List (.fcl) file is shown at the top of the screen. The current Code List may or may not have Codes defined. (2 9) If the new GIS Feature Codes are to be added to the current list, there are no changes to be made in this box so click the back button to return to the Main menu. (2 10) To create a new.fcl file in which to save the GIS Feature Codes, click the Load button. This exercise will create a new.fcl file. Page 14 of 24 (919)
17 (2 11) In the Feature Code List box, set the Folder and type a Name for the new.fcl file. (2 12) Click the OK button to continue. If the File doesn t exist, a Warning box will be displayed. (2 13) Click the Yes button to create the new file. After creating the new.fcl file, the empty Code List box is displayed. (2 14) Click the back button to return to the Main menu. (919) Page 15 of 24
18 (2 15) Back in the Main menu, click the Equip tab. (2 16) Click the Configure button. (2 17) For purposes of this exercise, click the check box next to Prompt for Height and Description. In a normal working environment, you may or may not want this option selected. (2 18) Click the OK button to continue. (2 19) Back in the Main menu, click the globe icon to switch to the Map View screen. Page 16 of 24 (919)
19 (2 20) In the Map View screen, on the File menu, click.dxf/.dwg/.dgn and then click Import.dwg. (2 21) Browse to the correct folder and click the.dwg file exported from Esri. (2 22) Click the OK button to continue. (2 23) In the Import.dwg Options screen, click the check box next to Import Esri GIS Data. (2 24) Select other options as needed. (2 25) Click the OK button to continue. (919) Page 17 of 24
20 (2 26) In the Import Esri Features screen, choose which Features are to be imported to the SurvPC Feature Code List by clicking a Feature and then clicking the Yes/No check box. (2 27) Click the OK button to continue. (2 28) Once the Map View screen is populated, click the Zoom buttons on the left to zoom in to a point. (2 29) Double left click on a point to view the Point Details. Page 18 of 24 (919)
21 (2 30) In the Point Details screen, click the Edit button. (2 31) In the Edit Point screen, click the Input/Edit Attributes button. In the Edit GIS Data screen, you can see all of the GIS Attribute data attached to the point. (2 32) Click the Next button to see additional attributes. (919) Page 19 of 24
22 (2 33) Click the Next or Previous buttons to view all defined attributes for the point. (2 34) Click the back button to return to the Edit Point screen. (2 35) Click the OK button to return to Point Details. (2 36) Click the back button to return to the Map View screen. Page 20 of 24 (919)
23 (2 37) Click the Close button to return to the Main menu. (2 38) On the Main menu, click the Survey tab. (2 39) Click the Store Points button. (2 40) In the Store PTS screen, click the Store button to set a new point. (919) Page 21 of 24
24 (2 41) In the Store Point screen, click the Feature Code/Description to use for the point. (2 42) Click the OK button to continue. (2 43) In the first Add GIS Data screen, type values for the attribute prompts. (2 44) Click the Next button to enter additional attributes. (2 45) Click the Next or Previous buttons to view and/or enter the remaining attributes for the point. (2 46) Click the Store button to finish. Page 22 of 24 (919)
25 After clicking the Store button you can see the new point has been set. (2 47) Click the Close button to return to the Main menu. (2 48) Click the globe icon to switch to the Map View screen. (2 49) In the Map View screen, on the File menu, click.dxf/.dwg/.dgn and then click Export.dwg. (919) Page 23 of 24
26 (2 50) Set the Folder and type a new Name for the.dwg file to send back to Esri. (2 51) Click the OK button to continue. (2 52) In the Export.dwg Options screen, click the check box next to Export Esri GIS Data. (2 53) Select other options and settings as needed. (2 54) Click the OK button to finish. Page 24 of 24 (919)
Using Field to Finish. Carlson Survey & SurvCE
Maryland Society of Surveyors 2013 Fall Conference Using Field to Finish with Carlson Survey & SurvCE Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing
More informationCarlson GIS for Surveyors
Professional Land Surveyors of Ohio 2016 Annual Conference -- Dayton Ohio Carlson GIS for Surveyors Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business
More informationNew Jersey SurvCon 2018 Carlson GIS for Surveyors Presented by
Carlson GIS for Surveyors Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business as That CAD Girl. She is based in Raleigh, North Carolina. Jennifer
More informationNew Jersey SurvCon GIS Data Collection. Presented by
GIS Data Collection Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business as That CAD Girl. She is based in Raleigh, North Carolina. Jennifer has a
More informationWorking with Profiles
Tennessee Association of Professional Land Surveyors 2016 Annual Conference Murfreesboro Working with Profiles In Carlson Software Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD
More informationIntroduction to Autodesk Land Desktop and Civil Design Geoffrey J. Coleman, PE
Introduction to Autodesk Land Desktop 2005 and Civil Design 2005 Geoffrey J. Coleman, PE Learn the Land Development Software used by Civil Engineers and Land Surveyors around the world. SDC PUBLICATIONS
More informationIf you are relying on someone else to provide existing ground data to you, use the guidelines below to ensure you receive the best data available.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Basics of Existing Ground Surface Generation The accuracy of an existing
More informationVersion 1.0 March 15, 2017
March 15, 2017 Carlson Field to Finish New Mexico Land Surveyors Contents Introduction... 3 Carlson Survey Field to Finish... 3 Data for input to Field to finish... 3 Formats... 3 Manufacturers... 3 The
More informationDetailed Geoid Creation
Detailed Geoid Creation In addition to the standard methods of Geoid creation found in Carlson X-Port, customized geoids can also be created with Carlson Survey. Carlson X-Port, the desktop product that
More informationCarlson Survey Getting Started with Points
Index File Extensions.cfg... See Configuration Settings (.cfg) file.crd... See Coordinate (.crd) file.dwg... See Drawing (.dwg) file.dwt... See Drawing Template (.dwg) file.grp... See Point Group (.grp)
More informationThat CAD Girl. J ennifer dib ona. Carlson 2008 Creating Roadway Templates. Website:
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Carlson 2008 Creating Roadway Templates Defining roadway templates can
More informationIn order to follow this set of directions you will need the following
How to Create Maps & Figures in ArcView 9x In order to follow this set of directions you will need the following 1) the Jenny s Louisiana GIS Instructional CD 2) a computer with ArcGIS on it (version 9.0
More informationExercise 1: Getting to know ArcGIS
The Scenario You are working for the California Visitor s Commission. You have been asked to prepare a map of California for several dignitaries from out of the country. Your map will need to include enough
More informationServer Usage & Third-Party Viewers
Server Usage & Third-Party Viewers October 2016 HiPER LOOK Version 1.4.16.0 Copyright 2015 PIXIA Corp. All Rights Reserved. Table of Contents HiPER LOOK Server Introduction... 2 Google Earth... 2 Installation...2
More informationBasic Mapping: Livelihood Zones In Haiti
Basic Mapping: Livelihood Zones In Haiti - 2009 Barbara Parmenter, revised by Carolyn Talmadge 9/10/2016 DATA SOURCES... 1 MAPPING NETWORK DRIVES OUTSIDE THE DATA LAB... 2 SETTING UP YOUR ARCMAP SESSION...
More informationNewsletter 11. Faithfully yours, Shlomi Sivan, CEO Sivan Design D.S Ltd April, Sales Phone: , Ext: 4
Newsletter 11 The year ended Dec. 2006 was a very successful year for the CivilCAD 2006 software; with a growth of 70% in the sales volume, we have exceeded 3200 users, and 1000 customers. Our participation
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More informationAnnotation Scaling in AutoCAD : Bringing the Technology Home
Annotation Scaling in AutoCAD : Bringing the Technology Home KaDe King U.S. CAD AC2660-L Learn how to implement annotation scaling in your organization. Whether you would like to start with baby steps
More informationSMART Recorder. Record. Pause. Stop
SMART Recorder The recorder is used to record actions that are done on the interactive screen. If a microphone is attached to the computer, narration can be recorded. After the recording has been created,
More informationRedlining Commands After retrieving a drawing to be redlined, select Redline from the Slick! menu bar or pick from one of the icons in the tool bar.
Annotate / Redlining During the design review process in working with engineering or architectural drawings, it is often useful to have the ability to look at a drawing and mark it up with comments or
More informationGIS LAB 1. Basic GIS Operations with ArcGIS. Calculating Stream Lengths and Watershed Areas.
GIS LAB 1 Basic GIS Operations with ArcGIS. Calculating Stream Lengths and Watershed Areas. ArcGIS offers some advantages for novice users. The graphical user interface is similar to many Windows packages
More informationGeo Apps: Modern Day GIS
Geo Apps: Modern Day GIS Exercise 1: Create a customer service request app Estimated time: 20 minutes Exercise 2: Create a story map Estimated time: 30 minutes Exercise 3: Use Web AppBuilder for ArcGIS
More informationLD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools
LD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools Kevin Larkin LSC Design, Inc. Learning Objectives Learn how to dynamically model stormwater ponds using
More informationGeog 459: Geographic Information Systems. Lesson 2 Laboratory Exercise
Exercise Description Mapping and interpreting metropolitan growth and decline patterns between 1990 and 2000. Course Concepts Presented Sunbelt region, population redistribution, and metropolitan areas.
More informationDV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks
DV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks Paul c.kirkendall MasterGraphics, Inc. Learning Objectives After this class, attendees will be able to import Civil 3D project
More informationHow to calculate population and jobs within ½ mile radius of site
How to calculate population and jobs within ½ mile radius of site Caltrans Project P359, Trip Generation Rates for Transportation Impact Analyses of Smart Growth Land Use Projects SECTION PAGE Population
More informationArborCAD by CAD International. Reference Manual
Reference Manual This application reference manual is to be read in conjunction with the RealCAD Reference Manual accessible from the HELP menu at the top of your CAD screen. Whilst the RealCAD Reference
More informationLesson 8 : How to Create a Distance from a Water Layer
Created By: Lane Carter Advisor: Paul Evangelista Date: July 2011 Software: ArcGIS 10 Lesson 8 : How to Create a Distance from a Water Layer Background This tutorial will cover the basic processes involved
More informationField Validation Exercise
Field Validation Exercise Background: When creating complex GIS databases, it is essential that all or a significant portion of the digitized (or acquired) data should to be validated; this is done with
More informationAutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data
AutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data Lesson 3 Surfaces Overview In this lesson, you learn how to work with surfaces in AutoCAD Civil 3D. Surfaces are threedimensional
More informationGeoreferencing Soil Maps in ArcMap 10.x: Basic procedures to download, open, manipulate and print spatial data
Georeferencing Soil Maps in ArcMap 10.x: Basic procedures to download, open, manipulate and print spatial data These procedures outline: A. Obtaining soil maps. B. Downloading boundary files. C. Uncompressing
More informationTrimble Building Data plugin for Autodesk Fabrication CADmep and Fabrication ESTmep. Setup Instructions
Trimble Building Data plugin for Autodesk Fabrication CADmep and Fabrication ESTmep Setup Instructions *Note: Prior to starting, click on the link below and browse to the appropriate BD Fabrication installer
More informationThe ArcMap Interface and Using Basic ArcMap Analysis Tools to Create a Map
The ArcMap Interface and Using Basic ArcMap Analysis Tools to Create a Map *You will need a computer with ESRI ArcGIS Desktop version 9.3 or higher installed* Data Download 1. Save the zipped folder with
More informationExercise 1: An Overview of ArcMap and ArcCatalog
Exercise 1: An Overview of ArcMap and ArcCatalog Introduction: ArcGIS is an integrated collection of GIS software products for building a complete GIS. ArcGIS enables users to deploy GIS functionality
More informationBasic Mapping: Livelihood Zones In Haiti
Basic Mapping: Livelihood Zones In Haiti - 2009 Barbara Parmenter, revised by Carolyn Talmadge 9/10/2017 for ArcMap 10.5.1 DATA SOURCES... 1 MAPPING NETWORK DRIVES OUTSIDE THE DATA LAB... 2 SETTING UP
More informationIntroduction to GIS & Mapping: ArcGIS Desktop
Introduction to GIS & Mapping: ArcGIS Desktop Your task in this exercise is to determine the best place to build a mixed use facility in Hudson County, NJ. In order to revitalize the community and take
More informationInstalling a Custom AutoCAD Toolbar (CUI interface)
Installing a Custom AutoCAD Toolbar (CUI interface) I used 2008LT for this tutorial; you may have a later AutoCAD with a different appearance. However, the customize user interface (cui) should be similar.
More informationObjectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.
v. 10.0 GMS 10.0 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS
More informationAutodesk 360 in Design and Construction in the Cloud: A Pre-Flight Lab
Autodesk 360 in Design and Construction in the Cloud: A Pre-Flight Lab IKERD Consulting LLC: Jerry Campbell VDC Consultant - Speaker IKERD Consulting LLC: Will Ikerd PE, CWI, LEED AP, Principal, President
More informationGeographical Information Systems Institute. Center for Geographic Analysis, Harvard University. LAB EXERCISE 1: Basic Mapping in ArcMap
Harvard University Introduction to ArcMap Geographical Information Systems Institute Center for Geographic Analysis, Harvard University LAB EXERCISE 1: Basic Mapping in ArcMap Individual files (lab instructions,
More informationEditing Parcel Fabrics Tutorial
Editing Parcel Fabrics Tutorial Copyright 1995-2010 Esri All rights reserved. Table of Contents Tutorial: Getting started with parcel fabric editing...................... 3 Tutorial: Creating new parcels
More informationClass #2 Lab: Basic CAD Skills & Standards. Basic AutoCAD Interface AutoCAD Skills AutoCAD Standards
Class #2 Lab: Basic CAD Skills & Standards 1230 Building Tech II NYC College of Technology Professor: Daniel Friedman AIA LEED AP Fall 2012 Paperspace/ Layouts Paperspace Paperspace Paperspace Paperspace
More informationExporting from GIS 9.0 to AutoCAD
Exporting from GIS 9.0 to AutoCAD Once a map file is created in GIS with all the desired layers, selected data within a pre-defined boundary can be exported as a AutoCAD.dwg file. Setting up clip boundary
More informationProcessing Feature Codes SPECTRA PRECISION SURVEY OFFICE TUTORIAL
Processing Feature Codes SPECTRA PRECISION SURVEY OFFICE TUTORIAL Corporate office: Spectra Precision 10355 Westmoor Drive Suite #100 Westminster, CO 80021 USA Phone: +1-720-587-4700 Toll free (in USA):
More informationBasic Tasks in ArcGIS 10.3.x
Basic Tasks in ArcGIS 10.3.x This guide provides instructions for performing a few basic tasks in ArcGIS 10.3.1, such as adding data to a map document, viewing and changing coordinate system information,
More informationField Validation. Background: Initial concept: 1 st step:
Field Validation Background: When creating complex GIS databases, it is essential that all or a significant portion of the digitized (or acquired) data should to be validated; this is done with various
More informationMap Tools: A Transformative Experience
Bonus Chapter 3 Map Tools: A Transformative Experience The Autodesk AutoCAD Civil 3D 2016 software contains most of the functionality that can be found in the Autodesk AutoCAD Map 3D 2016 software. As
More informationGeocoding Reference USA data in ArcMap 9.3
Tufts GIS Tip Sheet Geocoding Reference USA data in ArcMap 9.3 Written by Barbara Parmenter Revised 3/1/2011 In this exercise, you will map businesses or services for a town in the Boston metropolitan
More informationGEO 465/565 - Lab 7 Working with GTOPO30 Data in ArcGIS 9
GEO 465/565 - Lab 7 Working with GTOPO30 Data in ArcGIS 9 This lab explains how work with a Global 30-Arc-Second (GTOPO30) digital elevation model (DEM) from the U.S. Geological Survey. This dataset can
More informationObjectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.2 SMS 12.2 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
More informationIntroduction to QGIS: Instructor s Notes
2016 Introduction to QGIS: Instructor s Notes Created by: MARK DE BLOIS, CEO / FOUNDER, UPANDE LIMITED WITH SUPPORT FROM THE WORLD BANK AND THE UK DEPARTMENT FOR INTERNATIONAL DEVELOPMENT (DFID) Module
More informationAHC SharePoint 2010 Intro to Content Administration
AHC SharePoint 2010 Intro to Content Administration Email: training@health.ufl.edu Web Page: http://training.health.ufl.edu Last Updated 2/7/2014 1.0 INTRODUCTION TO SHAREPOINT 2010 1.4 Your New Site Before
More informationMigrating from Autodesk Land Desktop to Autodesk Civil 3D CV42-3L
December 2-5, 2003 MGM Grand Hotel Las Vegas Migrating from Autodesk Land Desktop to Autodesk Civil 3D CV42-3L About the Speaker: Pete Kelsey is an Autodesk Authorized Consultant an Autodesk Certified
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationOut of the Office and Into the Field: Introduction to ArcPad and ArcPad Application Builder
Out of the Office and Into the Field: Introduction to ArcPad and ArcPad Application Builder A Yale Map Collection GIS Workshop Preparing For the Tutorial 1. Navigate to the C:\Temp folder on your harddrive.
More informationHCA ArcGIS. Online Tool - How To Guide V1.0 2/15/2016 HAWAII CONSERVATION ALLIANCE AGOL
HCA ArcGIS 2/15/2016 Online Tool - How To Guide V1.0 HAWAII CONSERVATION ALLIANCE AGOL Table of Contents What is ArcGIS Online?... 1 Getting Started... 1 Getting a Login... 1 Logging In... 2 Searching
More informationSTART>PROGRAMS>ARCGIS>
Department of Urban Studies and Planning Spring 2006 Department of Architecture Site and Urban Systems Planning 11.304J / 4.255J GIS EXERCISE 2 Objectives: To generate the following maps using ArcGIS Software:
More informationScepter / Scepter II Getting Configured for Real Time Networks with an Internet Hot Spot
a. Turn Your Mi-Fi, Cell Phone or other Internet Hot Spot On b. Turn Your Scepter Data Collector On 1 c. In the center of the data collector tap Wi-Fi a. Tap Menu in the bottom Right Corner and then Wi-Fi
More informationIntroduction to QGIS: Student Workbook
2016 Introduction to QGIS: Student Workbook Created by: MARK DE BLOIS, CEO / FOUNDER, UPANDE LIMITED WITH SUPPORT FROM THE WORLD BANK AND THE UK DEPARTMENT FOR INTERNATIONAL DEVELOPMENT (DFID) Module 3:
More informationRoadway Alignments and Profiles
NOTES Module 15 Roadway Alignments and Profiles In this module, you learn how to create horizontal alignments, surface profiles, layout (design) profiles, and profile views in AutoCAD Civil 3D. This module
More informationMicroSurvey CAD 2018
MicroSurvey CAD 2018 s and s MicroSurvey CAD 2018 includes support for AutoCAD 2018.dwg files, Esri Shapefiles, Trimble JobXML files, and important bug fixes that continue to make MicroSurvey CAD the absolute
More informationConvert AutoCAD files to ESRI ShapeFiles, to be used in Leica icon telematics
Convert AutoCAD files to ESRI ShapeFiles, to be used in 1 1 Convert AutoCAD files to ESRI ShapeFiles, to be used in Background When you use it is possible to log the machine's position and visualize this
More informationDucks on the Pond: Stormwater Management Basin Analysis Using AutoCAD Civil 3D and Autodesk SSA
Ducks on the Pond: Stormwater Management Basin Analysis Using AutoCAD Civil 3D and Autodesk Josh Kehs, P.E. Autodesk, Inc. CI4541 Learning Objectives At the end of this class, you will be able to: Model
More informationGEN9638: Forensic CADology: When Good DWG Files Go Bad
GEN9638: Forensic CADology: When Good DWG Files Go Bad David Park CAD/BIM Coordinator Steven Litzau, P.E. Manager of Design Technology Join the conversation Class summary An Intermediate to Advanced Level
More informationHave your Cake and Eat it Too Using Modern Survey Packages, Workflows and Applications with Autodesk Civil 3D
Have your Cake and Eat it Too Using Modern Survey Packages, Workflows and Applications with Autodesk Civil 3D Autodesk Civil 3D is a very powerful and popular solution applicable in many Civil Engineering
More informationObjectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.2 GMS 10.2 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
More information2) Make sure that the georeferencing extension is on by right-clicking in the task bar area and selecting Georeferencing
HGIS Workshop Module 1 Georeferencing Large Scale Scanned Historical Maps Objective: Learn the Principles of Georeferencing 1) In ArcMap, open the project 01 data\arcdata_10_1\arcdata\toronto\georeference.mxd
More informationAutoCAD Civil 3D 2014 for Surveyors
AutoCAD Civil 3D 2014 for Surveyors SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationExplore some of the new functionality in ArcMap 10
Explore some of the new functionality in ArcMap 10 Scenario In this exercise, imagine you are a GIS analyst working for Old Dominion University. Construction will begin shortly on renovation of the new
More informationAchieving Contentment with the AutoCAD Architecture Content Browser Douglas Bowers, AIA
Achieving Contentment with the AutoCAD Architecture Content Browser Douglas Bowers, AIA AB110-3 If you have created AutoCAD Architecture (formerly ADT) object styles and want to know how to easily share
More informationPowerTopoCE. for Pentax W-800 Series Total Station
PowerTopoCE for Pentax W-800 Series Total Station PowerTopoCE User s guide Copyright 1992-2007 - SierraSoft All rights reserved January 2007 SierraSoft S.r.l. Via Roveredo 1/a 33170 PORDENONE PN ITALY
More informationUsing Annotation Sets Part 3 TIP TUTORIAL. Using Annotation Sets Part 3
TIP TUTORIAL Using Annotation Sets Part 3 INTRODUCTION In Annotation Sets Part 3 you will learn how to work with annotation sets. An annotation set is basically a collection of defaults and layers, which
More informationLayout Tutorial. Getting Started. Creating a Layout Template
Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template
More informationGeography 104 Instructors: Judd Curran & Mark Goodman. LAB EXERCISE #3 Data Analysis - Buffering (25pts)
Instructors: Judd Curran & Mark Goodman Name: LAB EXERCISE #3 Data Analysis - Buffering (25pts) Transformations in GIS are methods that transform GIS objects and databases into more useful products using
More informationDevelopment Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose. 2. Logging-in. 3.
Development Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose The purpose of this document is to outline basic functionality of the DANC Internet
More informationNorth Carolina Community Colleges Business Intelligence Reporting System
North Carolina Community Colleges Business Intelligence Reporting System College User Manual Creating Custom Reports Creating Custom Reports The following section will show you how to create custom reports
More informationTop Productivity Tips for AutoCAD 2009
Top Productivity Tips for AutoCAD 2009 Jonathan Christie Course Summary: Find out how to apply new and existing AutoCAD power tools and watch your drafting productivity improve. Learn how to re-use design
More informationfor ArcSketch Version 1.1 ArcSketch is a sample extension to ArcGIS. It works with ArcGIS 9.1
ArcSketch User Guide for ArcSketch Version 1.1 ArcSketch is a sample extension to ArcGIS. It works with ArcGIS 9.1 ArcSketch allows the user to quickly create, or sketch, features in ArcMap using easy-to-use
More informationTutorial 1: Finding and Displaying Spatial Data Using ArcGIS
Tutorial 1: Finding and Displaying Spatial Data Using ArcGIS This tutorial will introduce you to the following: Websites where you may browse to find geospatial information Identifying spatial data, usable
More informationESRI stylesheet selects a subset of the entire body of the metadata and presents it as if it was in a tabbed dialog.
Creating Metadata using ArcCatalog (ACT) 1. Choosing a metadata editor in ArcCatalog ArcCatalog comes with FGDC metadata editor, which create FGDC-compliant documentation. Metadata in ArcCatalog stored
More informationMapping 2001 Census Data Using ArcView 3.3
Mapping 2001 Census Data Using ArcView 3.3 These procedures outline: 1. Mapping a theme (making a map) 2. Preparing the layout for printing and exporting the map into various file formats. In order to
More information[InfraWorks 360 There s a Trick to That]
[LD17877] [InfraWorks 360 There s a Trick to That] [Juan Soto] [Kimley-Horn] Learning Objectives Create custom retaining walls Use SDF, blocks and Autodesk points for quick importing to InfraWorks 360
More informationTransformation Range of Points: Add to Point Numbers: Overwrite Existing Point Numbers: Use New Point Numbers: Store in New CRD File:
Transformation This command allows you to translate, rotate, and/or scale points and linework in the current job. The Align option does all 3 (translate, rotate, scale) at once. Any point drawn on the
More informationv Annotation Tools GMS 10.4 Tutorial Use scale bars, North arrows, floating images, text boxes, lines, arrows, circles/ovals, and rectangles.
v. 10.4 GMS 10.4 Tutorial Use scale bars, North arrows, floating images, text boxes, lines, arrows, circles/ovals, and rectangles. Objectives GMS includes a number of annotation tools that can be used
More informationManaging Content with AutoCAD DesignCenter
Managing Content with AutoCAD DesignCenter In This Chapter 14 This chapter introduces AutoCAD DesignCenter. You can now locate and organize drawing data and insert blocks, layers, external references,
More informationStringer Topo. For BricsCAD and AutoCAD. Getting Started
Stringer Topo For BricsCAD and AutoCAD Getting Started Table of Contents Typical Surveyors Workflow - Stringer Topo for CAD... 1 Module 1 - Introduction to Stringer Topo for CAD... 2 Module 2: Introduction
More informationQUICK START GUIDE. SOLO Forest
QUICK START GUIDE SOLO Forest Software Installation 1. For PC installation, run the.msi file. 2. For Mobile device installation, copy the.cab file onto the device 3. Run the.cab file Starting the Program
More informationNorth Carolina A&T State University Blackboard Faculty Support
North Carolina A&T State University Blackboard Faculty Support Importing Tests from Microsoft Word into Respondus Prior to beginning the import process, format the test questions in Microsoft Word using
More informationSharepoint-Committee and Task Force Sites-For Saddleback College
Site Design The Committee site has been designed with the Microsoft Office Document Workspace Template. It is the customized model for a committee or task force. Other sites available will be Team sites.
More informationGetting to Know ArcGIS Pro
Getting to Know ArcGIS Pro SUPPLEMENT FOR ARCGIS PRO 2.2 Getting to Know ArcGIS Pro, first edition, published in 2016, was written and tested on ArcGIS Pro 1.1. Since then, the capabilities and user interface
More informationSchedule Anything in Autodesk AutoCAD MEP
Matt Dillon Enceptia (Assistant/Co-presenter optional) [Arial 10] MP1424-L Learning Objectives At the end of this class, you will be able to: Explain the purpose of Property Set Definitions Create a custom
More informationChapter 6: Inserting fixtures
Chapter 6: Inserting fixtures Launch MasterChef from the icon on your desktop. Note: If you are using a demo version, once loaded the program, a message will notify the remaining days of the evaluation
More informationChoropleth Mapping with GIS
Choropleth Mapping with GIS In this lab you will be making 4 choropleth maps of the data you downloaded and processed last week. You will make your maps in ArcGIS using three different methods of classing
More informationEST151: Maintain Parts
EST151: Maintain Parts CERTIFIED COURSE CURRICULUM SAGE UNIVERSITY IMPORTANT NOTICE This document and the Sage 100 Contractor software may be used only in accordance with the Sage 100 Contractor End User
More informationObjectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.3 SMS 12.3 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
More informationCreating Map Tour Story Maps
Creating Map Tour Story Maps How to create a Map Tour Story Map quickly and easily using your smartphone or tablet, and your ArcGIS Online Organization Account This Tutorial was Created by Jennifer Anne
More informationStructural and Civil Coordination Rob Clark Excitech Ltd Graham Stewart Ramboll UK
Structural and Civil Coordination Rob Clark Excitech Ltd Graham Stewart Ramboll UK SE2477-L It is common that structural and civil engineering need to coordinate closely. Examples include forming retaining
More informationIntegrating CAD Data with ArcGIS
Integrating CAD Data with ArcGIS Agenda An Overview of CAD Drawings CAD Data Structure in ArcGIS Visualization Georeferencing Data Conversion ArcGIS for AutoCAD Q & A CAD Drawings - Overview Widely used
More informationTo change the shape of a floating toolbar
Modifying toolbars You can change the size of toolbar buttons and reposition, add, or delete toolbar buttons. You can also change the toolbar name and turn tooltips on and off. An important item to note-
More informationDownloading and Repairing Data
Overview In this exercise you will find and download spatial data for the town of Lowville in Lewis County, New York. The general idea of the exercise has changed from one of simply downloading data and
More information