Chapter 16. Control Unit Operation. Yonsei University
|
|
- Lisa Hunt
- 5 years ago
- Views:
Transcription
1 Chapter 16 Control Unit Operation
2 Contents Micro-Operation Control of the Processor Hardwired Implementation 16-2
3 Micro-Operations Micro-Operations Micro refers to the fact that each step is very simple and accomplishes very little The execution of a program consists of the sequential execution of instructions Each instruction is executed during an instruction cycle made up of shorter subcycles The performance of each subcycle involves one or more shorter operations, that is, micro-operations 16-3
4 Constituent Element Micro-Operations 16-4
5 The Fetch Cycle Micro-Operations Four involved registers. Memory address register (MAR) : Is connected to the address lines of the system bus It specifies the address in memory for a read or write operation Memory buffer register (MBR) : Is connected to the data lines of the system bus It contains the value to be stored in memory or the last value read from memory Program counter (PC) : Holds the address of the next instruction to be fetched Instruction register (IR) : Holds the last instruction fetched 16-5
6 Sequence of Events, Fetch Cycle Micro-Operations (a) Beginning 16-6
7 Sequence of Events, Fetch Cycle Micro-Operations (b) First Step 16-7
8 Sequence of Events, Fetch Cycle (c) Second Step Micro-Operations 16-8
9 Sequence of Events, Fetch Cycle Micro-Operations (d) Third Step 16-9
10 The Fetch Cycle Sequence Micro-Operations (a) Beginning : the address of the next instruction to be executed is in the PC (b) First step : move that address to the MAR (c) Second step : bring in the instruction The desired address is placed on the address bus, the control unit issues a READ command on the control bus, and the result appears on the data bus and is copied into the MBR (d) Third step : move the contents of the MBR to the IR This free up the MBR for use during a possible indirect cycle 16-10
11 The Fetch Cycle Sequence Micro-Operations Symbolic presentation t 1 : MAR (PC) t 2 : MBR Memory PC (PC) + I t 3 : IR (MBR) Micro-operation grouping rules 1. The proper sequence of events must be followed 2. Conflicts must be avoided Micro-operation involve an addition - This addition could be performed by the ALU - The use of the ALU may involve additional micro-operations 16-11
12 The Indirect Cycle Micro-Operations Indirect addressing t 1 : MAR (IR(Address)) t 2 : MBR Memory t 3 : IR(Address) (MBR(Address)) 16-12
13 The Interrupt Cycle Micro-Operations t 1 : MBR (PC) t 2 : MAR Save_Address PC Routine_Address t 3 : Memory (MBR) 16-13
14 The Execute Cycle Micro-Operations ADD R1, X t 1 : MAR (IR(address)) t 2 : MBR Memory t 3 : R1 (R1) + (MBR) ISZ X (increment and skip if zero) t 1 : MAR (IR(address)) t 2 : MBR Memory t 3 : MBR (MBR) + 1 t 4 : Memory (MBR) If((MBR) = 0) then (PC (PC) +I) 16-14
15 The Execute Cycle Micro-Operations BSA X (branch and save address) t 1 : MAR (IR(address)) MBR (PC) t 2 : PC (IR(address)) Memory MBR t 3 : PC (PC) + I 16-15
16 The Instruction Cycle Micro-Operations There is one sequence each for the fetch, indirect, and interrupt cycle, and, for the execute cycle, there is one sequence of micro-operation for each opcode Instruction cycle code(icc) 00: Fetch 01: Indirect 10: Execute 11: Interrupt 16-16
17 Flowchart for Instruction Cycle Micro-Operations 16-17
18 Functional Requirements Control of the Processor The following three-step process leads to a characterization of the control unit: Define the basic elements of the processor Describe the micro-operations that the processor performs Determine the functions that the control unit must perform to cause the micro operations to be performed Basic functional elements ALU Register Internal data paths External data paths Control unit Control Of The Processor 16-18
19 Functional Requirements Control of the Processor The reader should see that all microoperations fall into the following categories Transfer data from one register to another Transfer data from a register to an external interface Transfer data from an external interface to a register Perform an arithmetic or logic operation, using registers for input and output The control unit perform two basic tasks Sequencing Execution 16-19
20 Control Signals Control of the Processor Inputs Clock Instruction register Flags Outputs Control signals within the processor Control signals to control bus 16-20
21 Model of Control Unit Control of the Processor 16-21
22 Control Signals Control of the Processor A control signal that opens gates, allowing the contents of the MAR onto the address bus A memory read control signal on the control bus A control signal that opens the gates, allowing the contents of the data bus to be stored in the MBR Control signals to logic that add 1 to the contents of the PC and store the result back to the PC 16-22
23 A Control Signals Example Control of the Processor Control signals go to three separate destinations Data paths ALU System bus 16-23
24 Data Paths and Control Signals Control of the Processor 16-24
25 Micro-operation operation and Control Signals Control of the Processor 16-25
26 Internal Processor Organization Control of the Processor The ALU and all processor registers are connected by a single internal bus Gates and control signals are provided for movement of data onto and off the bus from each register Two new registers,labeled Y and Z, have been added to the organization 16-26
27 CPU with Internal Bus Control of the Processor 16-27
28 Internal Processor Organization An operation to add a value from memory to the AC would have the following steps: Control of the Processor t 1 : MAR<-(IR(address)) t 2 : MBR<-Memory t 3 : Y<-(MBR) t 4 : Z<-(AC) + (Y) t 5 :AC<-(Z) Register Y provide temporary storage for the other input Register Z provide temporary output storage 16-28
29 The Intel 8085 Control of the Processor Incrementer/decrementer address latch Logic that can add 1 to or subtract 1 from the contents of the stack pointer or program counter Interrupt control This module handles multiple levels of interrupt signals Serial I/O control This module interfaces to devices that communicate 1 bit at a time 16-29
30 Intel 8085 CPU Block Diagram Control of the Processor 16-30
31 Intel8085 External Signals Control of the Processor 16-31
32 Intel8085 External Signals Control of the Processor 16-32
33 Intel 8085 Pin Configuration Control of the Processor 16-33
34 Timing and control Control of the Processor The control unit is identified as having two components labeled (1) instruction decoder and machine cycle encoding (2) Timing and control Timing and control accepts as inputs clock, current instruction and some external control signal Each instruction cycle is divided into from one to five machine cycles The number of machine cycles is fixed for a given instruction but varies from one instruction to another 16-34
35 Timing Diagram Control of the Processor 16-35
36 Hardwired Implementation Hardwired Implementation Control unit implementation Hardwired implementation Microprogrammed implementation 16-36
37 Control Unit Inputs Hardwired Implementation The key inputs are the instruction register, the clock, flags, and control bus signals To simplify the control unit logic, there should be a unique logic input for each opcode Decoder Takes an encoded input and produces a single output The clock portion of the control unit issues a repetitive sequence of pulses 16-37
38 Decoder Hardwired Implementation 16-38
39 Control Unit with Decoded Inputs Hardwired Implementation 16-39
40 Control Unit Logic Hardwired Implementation Derive a Boolean expression of that signal as a function of the inputs Define two new control signal, P and Q PQ = 00 PQ = 01 PQ = 10 PQ = 11 Fetch Cycle Indirect Cycle Execute Cycle Interrupt Cycle C 5 = P Q T 2 + P Q T 2 C 5 = P Q T2+ P Q T2+ P Q LDA+ ADD+ AND) ( T
41 Control Unit Logic Hardwired Implementation The task of implementing a combinatorial circuit that satisfies all of these equations becomes extremely difficult The results is that a far simpler approach Microprogramming 16-41
There are four registers involved in the fetch cycle: MAR, MBR, PC, and IR.
CS 320 Ch. 20 The Control Unit Instructions are broken down into fetch, indirect, execute, and interrupt cycles. Each of these cycles, in turn, can be broken down into microoperations where a microoperation
More informationMicro-Operations. execution of a sequence of steps, i.e., cycles
Micro-Operations Instruction execution execution of a sequence of steps, i.e., cycles Fetch, Indirect, Execute & Interrupt cycles Cycle - a sequence of micro-operations Micro-operations data transfer between
More informationWilliam Stallings Computer Organization and Architecture
William Stallings Computer Organization and Architecture Chapter 16 Control Unit Operations Rev. 3.2 (2009-10) by Enrico Nardelli 16-1 Execution of the Instruction Cycle It has many elementary phases,
More informationAdvanced Parallel Architecture Lesson 3. Annalisa Massini /2015
Advanced Parallel Architecture Lesson 3 Annalisa Massini - 2014/2015 Von Neumann Architecture 2 Summary of the traditional computer architecture: Von Neumann architecture http://williamstallings.com/coa/coa7e.html
More informationClass Notes. Dr.C.N.Zhang. Department of Computer Science. University of Regina. Regina, SK, Canada, S4S 0A2
Class Notes CS400 Part VI Dr.C.N.Zhang Department of Computer Science University of Regina Regina, SK, Canada, S4S 0A2 C. N. Zhang, CS400 83 VI. CENTRAL PROCESSING UNIT 1 Set 1.1 Addressing Modes and Formats
More informationDigital System Design Using Verilog. - Processing Unit Design
Digital System Design Using Verilog - Processing Unit Design 1.1 CPU BASICS A typical CPU has three major components: (1) Register set, (2) Arithmetic logic unit (ALU), and (3) Control unit (CU) The register
More informationLecture1: introduction. Outline: History overview Central processing unite Register set Special purpose address registers Datapath Control unit
Lecture1: introduction Outline: History overview Central processing unite Register set Special purpose address registers Datapath Control unit 1 1. History overview Computer systems have conventionally
More informationChapter 5. Computer Architecture Organization and Design. Computer System Architecture Database Lab, SANGJI University
Chapter 5. Computer Architecture Organization and Design Computer System Architecture Database Lab, SANGJI University Computer Architecture Organization and Design Instruction Codes Computer Registers
More informationProcessing Unit CS206T
Processing Unit CS206T Microprocessors The density of elements on processor chips continued to rise More and more elements were placed on each chip so that fewer and fewer chips were needed to construct
More informationModule 5 - CPU Design
Module 5 - CPU Design Lecture 1 - Introduction to CPU The operation or task that must perform by CPU is: Fetch Instruction: The CPU reads an instruction from memory. Interpret Instruction: The instruction
More informationBlog -
. Instruction Codes Every different processor type has its own design (different registers, buses, microoperations, machine instructions, etc) Modern processor is a very complex device It contains Many
More informationCPU Structure and Function
Computer Architecture Computer Architecture Prof. Dr. Nizamettin AYDIN naydin@yildiz.edu.tr nizamettinaydin@gmail.com http://www.yildiz.edu.tr/~naydin CPU Structure and Function 1 2 CPU Structure Registers
More informationChapter 20 - Microprogrammed Control (9 th edition)
Chapter 20 - Microprogrammed Control (9 th edition) Luis Tarrataca luis.tarrataca@gmail.com CEFET-RJ L. Tarrataca Chapter 20 - Microprogrammed Control 1 / 47 Table of Contents I 1 Motivation 2 Basic Concepts
More informationAdvanced Parallel Architecture Lesson 3. Annalisa Massini /2015
Advanced Parallel Architecture Lesson 3 Annalisa Massini - Von Neumann Architecture 2 Two lessons Summary of the traditional computer architecture Von Neumann architecture http://williamstallings.com/coa/coa7e.html
More informationChapter 3 : Control Unit
3.1 Control Memory Chapter 3 Control Unit The function of the control unit in a digital computer is to initiate sequences of microoperations. When the control signals are generated by hardware using conventional
More informationcsitnepal Unit 3 Basic Computer Organization and Design
Unit 3 Basic Computer Organization and Design Introduction We introduce here a basic computer whose operation can be specified by the resister transfer statements. Internal organization of the computer
More informationCHAPTER SIX BASIC COMPUTER ORGANIZATION AND DESIGN
CHAPTER SIX BASIC COMPUTER ORGANIZATION AND DESIGN 6.1. Instruction Codes The organization of a digital computer defined by: 1. The set of registers it contains and their function. 2. The set of instructions
More informationSCRAM Introduction. Philipp Koehn. 19 February 2018
SCRAM Introduction Philipp Koehn 19 February 2018 This eek 1 Fully work through a computer circuit assembly code Simple but Complete Random Access Machine (SCRAM) every instruction is 8 bit 4 bit for op-code:
More information5-1 Instruction Codes
Chapter 5: Lo ai Tawalbeh Basic Computer Organization and Design 5-1 Instruction Codes The Internal organization of a digital system is defined by the sequence of microoperations it performs on data stored
More informationCPU Structure and Function
CPU Structure and Function Chapter 12 Lesson 17 Slide 1/36 Processor Organization CPU must: Fetch instructions Interpret instructions Fetch data Process data Write data Lesson 17 Slide 2/36 CPU With Systems
More informationUnit II Basic Computer Organization
1. Define the term. Internal Organization-The internal organization of a digital system is defined by the sequence of microoperations it performs on data stored in its registers. Program- A program is
More informationPart A Questions 1. What is an ISP? ISP stands for Instruction Set Processor. This unit is simply called as processor which executes machine instruction and coordinates the activities of other units..
More informationUNIT- 5. Chapter 12 Processor Structure and Function
UNIT- 5 Chapter 12 Processor Structure and Function CPU Structure CPU must: Fetch instructions Interpret instructions Fetch data Process data Write data CPU With Systems Bus CPU Internal Structure Registers
More informationCPU Structure and Function. Chapter 12, William Stallings Computer Organization and Architecture 7 th Edition
CPU Structure and Function Chapter 12, William Stallings Computer Organization and Architecture 7 th Edition CPU must: CPU Function Fetch instructions Interpret/decode instructions Fetch data Process data
More informationBASIC COMPUTER ORGANIZATION AND DESIGN
1 BASIC COMPUTER ORGANIZATION AND DESIGN Instruction Codes Computer Registers Computer Instructions Timing and Control Instruction Cycle Memory Reference Instructions Input-Output and Interrupt Complete
More informationWilliam Stallings Computer Organization and Architecture. Chapter 11 CPU Structure and Function
William Stallings Computer Organization and Architecture Chapter 11 CPU Structure and Function CPU Structure CPU must: Fetch instructions Interpret instructions Fetch data Process data Write data Registers
More informationBasic Computer Organization - Designing your first computer. Acknowledgment: Most of the slides are adapted from Prof. Hyunsoo Yoon s slides.
Basic Computer Organization - Designing your first computer Acknowledgment: Most of the slides are adapted from Prof. Hyunsoo Yoon s slides. 1 This week- BASIC COMPUTER ORGANIZATION AND DESIGN Instruction
More informationChapter 05: Basic Processing Units Control Unit Design. Lesson 15: Microinstructions
Chapter 05: Basic Processing Units Control Unit Design Lesson 15: Microinstructions 1 Objective Understand that an instruction implement by sequences of control signals generated by microinstructions in
More informationCHAPTER 5 Basic Organization and Design Outline Instruction Codes Computer Registers Computer Instructions Timing and Control Instruction Cycle
CS 224: Computer Organization S.KHABET CHAPTER 5 Basic Organization and Design Outline Instruction Codes Computer Registers Computer Instructions Timing and Control Instruction Cycle Memory Reference Instructions
More informationComputer Organization (Autonomous)
Computer Organization (Autonomous) UNIT II Sections - A & D Prepared by Anil Kumar Prathipati, Asst. Prof., Dept. of CSE. SYLLABUS Basic Computer Organization and Design: Instruction codes Stored Program
More informationUNIT:2 BASIC COMPUTER ORGANIZATION AND DESIGN
1 UNIT:2 BASIC COMPUTER ORGANIZATION AND DESIGN BASIC COMPUTER ORGANIZATION AND DESIGN 2.1 Instruction Codes 2.2 Computer Registers AC or Accumulator, Data Register or DR, the AR or Address Register, program
More informationComputer Organization II CMSC 3833 Lecture 33
Term MARIE Definition Machine Architecture that is Really Intuitive and Easy 4.8.1 The Architecture Figure s Architecture Characteristics: Binary, two s complement Stored program, fixed word length Word
More informationBASIC COMPUTER ORGANIZATION AND DESIGN
BASIC COMPUTER ORGANIZATION AND DESIGN Instruction Codes Computer Registers Computer Instructions Timing and Control Instruction Cycle Memory Reference Instructions Input-Output and Interrupt Complete
More informationLecture 10: Control Unit
Lecture 10 What is control? Functional requirements for CPU Control Unit (Ohjausyksikkö) Ch 15-16 [Sta09] (Sta06:16-17) Micro-operations Control signals (Ohjaussignaalit) Hardwired control (Langoitettu
More informationFaculty of Engineering Systems & Biomedical Dept. First Year Cairo University Sheet 6 Computer I
aculty of Engineering Systems & Biomedical Dept. irst Year Cairo University Sheet 6 Computer I 1. Choose rue or alse for each of the following statements a) In a direct addressing mode instruction, the
More informationLecture 10: Control Unit
Lecture 10 Control Unit (Ohjausyksikkö) Ch 15-16 [Sta09] (Sta06:16-17) Micro-operations Control signals (Ohjaussignaalit) Hardwired control (Langoitettu ohjaus) Microprogrammed control (Mikro-ohjelmoitu
More informationBasic Computer Organization and Design Part 2/3
Basic Computer Organization and Design Part 2/3 Adapted by Dr. Adel Ammar Computer Organization Basic Computer Instructions Basic Computer Instruction Format Memory-Reference Instructions (OP-code = 000
More informationBlog - https://anilkumarprathipati.wordpress.com/
Control Memory 1. Introduction The function of the control unit in a digital computer is to initiate sequences of microoperations. When the control signals are generated by hardware using conventional
More informationComputer Logic II CCE 2010
Computer Logic II CCE 2010 Dr. Owen Casha Computer Logic II 1 The Processing Unit Computer Logic II 2 The Processing Unit In its simplest form, a computer has one unit that executes program instructions.
More informationChapter 12. CPU Structure and Function. Yonsei University
Chapter 12 CPU Structure and Function Contents Processor organization Register organization Instruction cycle Instruction pipelining The Pentium processor The PowerPC processor 12-2 CPU Structures Processor
More informationCOMPUTER ORGANIZATION
COMPUTER ORGANIZATION INDEX UNIT-II PPT SLIDES Srl. No. Module as per Session planner Lecture No. PPT Slide No. 1. Register Transfer language 2. Register Transfer Bus and memory transfers 3. Arithmetic
More informationBasic Processing Unit: Some Fundamental Concepts, Execution of a. Complete Instruction, Multiple Bus Organization, Hard-wired Control,
UNIT - 7 Basic Processing Unit: Some Fundamental Concepts, Execution of a Complete Instruction, Multiple Bus Organization, Hard-wired Control, Microprogrammed Control Page 178 UNIT - 7 BASIC PROCESSING
More informationComputer Architecture
Computer Architecture Lecture 1: Digital logic circuits The digital computer is a digital system that performs various computational tasks. Digital computers use the binary number system, which has two
More informationBASIC COMPUTER ORGANIZATION AND DESIGN
1 BASIC COMPUTER ORGANIZATION AND DESIGN Instruction Codes Computer Registers Computer Instructions Timing and Control Instruction Cycle Memory Reference Instructions Input-Output and Interrupt Complete
More informationASSEMBLY LANGUAGE MACHINE ORGANIZATION
ASSEMBLY LANGUAGE MACHINE ORGANIZATION CHAPTER 3 1 Sub-topics The topic will cover: Microprocessor architecture CPU processing methods Pipelining Superscalar RISC Multiprocessing Instruction Cycle Instruction
More informationAdvanced Computer Architecture
Advanced Computer Architecture Lecture No. 22 Reading Material Vincent P. Heuring&Harry F. Jordan Chapter 5 Computer Systems Design and Architecture 5.3 Summary Microprogramming Working of a General Microcoded
More informationProgramming Level A.R. Hurson Department of Computer Science Missouri University of Science & Technology Rolla, Missouri
Programming Level A.R. Hurson Department of Computer Science Missouri University of Science & Technology Rolla, Missouri 65409 hurson@mst.edu A.R. Hurson 1 Programming Level Computer: A computer with a
More informationChapter 1 : Introduction
Chapter 1 Introduction 1.1 Introduction A Microprocessor is a multipurpose programmable, clock driven, register based electronic device that reads binary instructions from a storage device called memory,
More informationThe register set differs from one computer architecture to another. It is usually a combination of general-purpose and special purpose registers
Part (6) CPU BASICS A typical CPU has three major components: 1- register set, 2- arithmetic logic unit (ALU), 3- control unit (CU). The figure below shows the internal structure of the CPU. The CPU fetches
More informationComputer architecture Assignment 3
Computer architecture Assignment 3 1- An instruction at address 14E in the basic computer has I=0, an operation code of the AND instruction, and an address part equal to 109(all numbers are in hexadecimal).
More informationComputer Architecture Programming the Basic Computer
4. The Execution of the EXCHANGE Instruction The EXCHANGE routine reads the operand from the effective address and places it in DR. The contents of DR and AC are interchanged in the third microinstruction.
More informationComputer Architecture and Organization: L06: Instruction Cycle
Computer Architecture and Organization: L06: Instruction Cycle By: A. H. Abdul Hafez Abdul.hafez@hku.edu.tr, ah.abdulhafez@gmail.com 1 Outlines 1. Fetch and decode 2. Determine the Type of Instruction
More informationMICROPROGRAMMED CONTROL
MICROPROGRAMMED CONTROL Hardwired Control Unit: When the control signals are generated by hardware using conventional logic design techniques, the control unit is said to be hardwired. Micro programmed
More informationCC312: Computer Organization
CC312: Computer Organization Dr. Ahmed Abou EL-Farag Dr. Marwa El-Shenawy 1 Chapter 4 MARIE: An Introduction to a Simple Computer Chapter 4 Objectives Learn the components common to every modern computer
More informationChapter 2 Instruction Set Architecture
Chapter 2 Instruction Set Architecture Course Outcome (CO) - CO2 Describe the architecture and organization of computer systems Program Outcome (PO) PO1 Apply knowledge of mathematics, science and engineering
More informationMicro-programmed Control Ch 15
Micro-programmed Control Ch 15 Micro-instructions Micro-programmed Control Unit Sequencing Execution Characteristics 1 Hardwired Control (4) Complex Fast Difficult to design Difficult to modify Lots of
More informationMachine Instructions vs. Micro-instructions. Micro-programmed Control Ch 15. Machine Instructions vs. Micro-instructions (2) Hardwired Control (4)
Micro-programmed Control Ch 15 Micro-instructions Micro-programmed Control Unit Sequencing Execution Characteristics 1 Machine Instructions vs. Micro-instructions Memory execution unit CPU control memory
More informationMicro-programmed Control Ch 15
Micro-programmed Control Ch 15 Micro-instructions Micro-programmed Control Unit Sequencing Execution Characteristics 1 Hardwired Control (4) Complex Fast Difficult to design Difficult to modify Lots of
More informationBasics of Microprocessor
Unit 1 Basics of Microprocessor 1. Microprocessor Microprocessor is a multipurpose programmable integrated device that has computing and decision making capability. This semiconductor IC is manufactured
More informationASSIGNMENT ECE514 (COMPUTER ORGANIZATION) ASSIGNMENT NO. 3
ASSIGNMENT ECE514 (COMPUTER ORGANIZATION) ASSIGNMENT NO. 3 This is an individual assignment for ECE514. It carries a mark of 10%. The rubric of marks is given in Appendix 3. This assignment is about designing
More informationComputer Organization and Design
CSE211 Computer Organization and Design Lecture : 3 Tutorial: 1 Practical: 0 Credit: 4 KIDS Labs 1 Unit 1 : Basics of Digital Electronics Introduction Logic Gates Flip Flops Decoder Encoder Multiplexers
More informationWilliam Stallings Computer Organization and Architecture 8 th Edition. Chapter 16 Micro-programmed Control
William Stallings Computer Organization and Architecture 8 th Edition Chapter 16 Micro-programmed Control Control Unit Organization Micro-programmed Control Use sequences of instructions (see earlier notes)
More informationChapter 4. MARIE: An Introduction to a Simple Computer
Chapter 4 MARIE: An Introduction to a Simple Computer Chapter 4 Objectives Learn the components common to every modern computer system. Be able to explain how each component contributes to program execution.
More information4. MICROPROGRAMMED COMPUTERS
Structure of Computer Systems Laboratory No. 4 1 4. MICROPROGRAMMED COMPUTERS This laboratory work presents the principle of microprogrammed computers and an example of microprogrammed architecture, in
More informationCHAPTER 8: Central Processing Unit (CPU)
CS 224: Computer Organization S.KHABET CHAPTER 8: Central Processing Unit (CPU) Outline Introduction General Register Organization Stack Organization Instruction Formats Addressing Modes 1 Major Components
More informationDC57 COMPUTER ORGANIZATION JUNE 2013
Q2 (a) How do various factors like Hardware design, Instruction set, Compiler related to the performance of a computer? The most important measure of a computer is how quickly it can execute programs.
More informationTutorial 4 KE What are the differences among sequential access, direct access, and random access?
Tutorial 4 KE40703 1. What are the differences among sequential access, direct access, and random access? Sequential access: Memory is organized into units of data, called records. Access must be made
More informationWilliam Stallings Computer Organization and Architecture 8 th Edition. Micro-programmed Control
William Stallings Computer Organization and Architecture 8 th Edition Chapter 16 Micro-programmed Control Presenters: Andres Borroto Juan Fernandez Laura Verdaguer Control Unit Organization Micro-programmed
More informationOutcomes. Lecture 13 - Introduction to the Central Processing Unit (CPU) Central Processing UNIT (CPU) or Processor
Lecture 13 - Introduction to the Central Processing Unit (CPU) Outcomes What is a CPU? How are instructions prepared by the CPU before execution? What registers and operations are involved in this preparation
More informationMicroprogrammed Control
Microprogrammed Control Chapter 17 Lesson 21 Slide 1/24 From chapter 16 Implementation of the control unit: Hardwired Essentially a combinatorial circuit Microprogrammed An alternative to a hardwired implementation.
More informationMicro-programmed Control Ch 17
Micro-programmed Control Ch 17 Micro-instructions Micro-programmed Control Unit Sequencing Execution Characteristics Course Summary 1 Hardwired Control (4) Complex Fast Difficult to design Difficult to
More informationMicro computer Organization
Micro computer Organization I Base Basic Components CPU SYSTEM BUSES VDD CLK RESET 1 MPU vs MCU Microprocessor Unit (MPU) CPU (called Microprocessor) is a die All components external to die Basically on
More informationIntroduction to CPU Design
١ Introduction to CPU Design Computer Organization & Assembly Language Programming Dr Adnan Gutub aagutub at uqu.edu.sa [Adapted from slides of Dr. Kip Irvine: Assembly Language for Intel-Based Computers]
More informationHardwired Control (4) Micro-programmed Control Ch 17. Micro-programmed Control (3) Machine Instructions vs. Micro-instructions
Micro-programmed Control Ch 17 Micro-instructions Micro-programmed Control Unit Sequencing Execution Characteristics Course Summary Hardwired Control (4) Complex Fast Difficult to design Difficult to modify
More informationThe Itanium Bit Microprocessor Report
The Itanium - 1986 8 Bit Microprocessor Report By PRIYANK JAIN (02010123) Group # 11 Under guidance of Dr. J. K. Deka & Dr. S. B. Nair Department of Computer Science & Engineering Indian Institute of Technology,
More informationMajor and Minor States
Major and Minor States We now consider the micro operations and control signals associated with the execution of each instruction in the ISA. The execution of each instruction is divided into three phases.
More informationWilliam Stallings Computer Organization and Architecture
William Stallings Computer Organization and Architecture Chapter 11 CPU Structure and Function Rev. 3.2.1 (2005-06) by Enrico Nardelli 11-1 CPU Functions CPU must: Fetch instructions Decode instructions
More informationEE 3170 Microcontroller Applications
EE 3170 Microcontroller Applications Lecture 4 : Processors, Computers, and Controllers - 1.2 (reading assignment), 1.3-1.5 Based on slides for ECE3170 by Profs. Kieckhafer, Davis, Tan, and Cischke Outline
More informationChapter 4. MARIE: An Introduction to a Simple Computer 4.8 MARIE 4.8 MARIE A Discussion on Decoding
4.8 MARIE This is the MARIE architecture shown graphically. Chapter 4 MARIE: An Introduction to a Simple Computer 2 4.8 MARIE MARIE s Full Instruction Set A computer s control unit keeps things synchronized,
More informationWilliam Stallings Computer Organization and Architecture 8 th Edition. Chapter 12 Processor Structure and Function
William Stallings Computer Organization and Architecture 8 th Edition Chapter 12 Processor Structure and Function CPU Structure CPU must: Fetch instructions Interpret instructions Fetch data Process data
More informationAuthor : Dalbir Singh, Computer Science Deptt. CPU Structure and Functions. 1. Processor Organization
Author : Dalbir Singh, Computer Science Deptt. CPU Structure and Functions 1. Processor Organization To understand the organization of the CPU, let us consider the requirements placed on the CPU, the things
More informationMicroprocessor Architecture
Microprocessor - 8085 Architecture 8085 is pronounced as "eighty-eighty-five" microprocessor. It is an 8-bit microprocessor designed by Intel in 1977 using NMOS technology. It has the following configuration
More informationCOMPUTER ARCHITECTURE AND ORGANIZATION Register Transfer and Micro-operations 1. Introduction A digital system is an interconnection of digital
Register Transfer and Micro-operations 1. Introduction A digital system is an interconnection of digital hardware modules that accomplish a specific information-processing task. Digital systems vary in
More informationC.P.U Organization. Memory Unit. Central Processing Unit (C.P.U) Input-Output Processor (IOP) Figure (1) Digital Computer Block Diagram
C.P.U Organization 1.1 Introduction A computer system is sometimes subdivided into two functional entities "Hardware" and "Software". The H/W of the computer consists of all the electronic components and
More informationFig: Computer memory with Program, data, and Stack. Blog - NEC (Autonomous) 1
Central Processing Unit 1. Stack Organization A useful feature that is included in the CPU of most computers is a stack or last in, first out (LIFO) list. A stack is a storage device that stores information
More informationTHE MICROPROCESSOR Von Neumann s Architecture Model
THE ICROPROCESSOR Von Neumann s Architecture odel Input/Output unit Provides instructions and data emory unit Stores both instructions and data Arithmetic and logic unit Processes everything Control unit
More informationComputer Organization CS 206 T Lec# 2: Instruction Sets
Computer Organization CS 206 T Lec# 2: Instruction Sets Topics What is an instruction set Elements of instruction Instruction Format Instruction types Types of operations Types of operand Addressing mode
More informationChapter 4. Chapter 4 Objectives. MARIE: An Introduction to a Simple Computer
Chapter 4 MARIE: An Introduction to a Simple Computer Chapter 4 Objectives Learn the components common to every modern computer system. Be able to explain how each component contributes to program execution.
More informationChapter 4. MARIE: An Introduction to a Simple Computer. Chapter 4 Objectives. 4.1 Introduction. 4.2 CPU Basics
Chapter 4 Objectives Learn the components common to every modern computer system. Chapter 4 MARIE: An Introduction to a Simple Computer Be able to explain how each component contributes to program execution.
More informationRegister-Level Design
Register-Level Design A digital system can be treated at different level of abstraction or compleity. So far, we have seen it at the gate level and the transistor level. At a higher level than the gate
More informationMARIE: An Introduction to a Simple Computer
MARIE: An Introduction to a Simple Computer 4.2 CPU Basics The computer s CPU fetches, decodes, and executes program instructions. The two principal parts of the CPU are the datapath and the control unit.
More informationMARIE: An Introduction to a Simple Computer
MARIE: An Introduction to a Simple Computer Outline Learn the components common to every modern computer system. Be able to explain how each component contributes to program execution. Understand a simple
More informationMicroprocessors/Microcontrollers
Microprocessors/Microcontrollers A central processing unit (CPU) fabricated on one or more chips, containing the basic arithmetic, logic, and control elements of a computer that are required for processing
More informationChapter 17. Microprogrammed Control. Yonsei University
Chapter 17 Microprogrammed Control Contents Basic Concepts Microinstruction Sequencing Microinstruction Execution TI 8800 Applications of Microprogramming 17-2 Introduction Basic Concepts An alternative
More informationLatches. IT 3123 Hardware and Software Concepts. Registers. The Little Man has Registers. Data Registers. Program Counter
IT 3123 Hardware and Software Concepts Notice: This session is being recorded. CPU and Memory June 11 Copyright 2005 by Bob Brown Latches Can store one bit of data Can be ganged together to store more
More informationUNIT-II. Part-2: CENTRAL PROCESSING UNIT
Page1 UNIT-II Part-2: CENTRAL PROCESSING UNIT Stack Organization Instruction Formats Addressing Modes Data Transfer And Manipulation Program Control Reduced Instruction Set Computer (RISC) Introduction:
More informationCHAPTER 5 : Introduction to Intel 8085 Microprocessor Hardware BENG 2223 MICROPROCESSOR TECHNOLOGY
CHAPTER 5 : Introduction to Intel 8085 Hardware BENG 2223 MICROPROCESSOR TECHNOLOGY The 8085A(commonly known as the 8085) : Was first introduced in March 1976 is an 8-bit microprocessor with 16-bit address
More informationRunning Applications
Running Applications Computer Hardware Central Processing Unit (CPU) CPU PC IR MAR MBR I/O AR I/O BR To exchange data with memory Brain of Computer, controls everything Few registers PC (Program Counter):
More informationSTRUCTURE OF DESKTOP COMPUTERS
Page no: 1 UNIT 1 STRUCTURE OF DESKTOP COMPUTERS The desktop computers are the computers which are usually found on a home or office desk. They consist of processing unit, storage unit, visual display
More informationCPU ARCHITECTURE. QUESTION 1 Explain how the width of the data bus and system clock speed affect the performance of a computer system.
CPU ARCHITECTURE QUESTION 1 Explain how the width of the data bus and system clock speed affect the performance of a computer system. ANSWER 1 Data Bus Width the width of the data bus determines the number
More information