Power distribution systems - accessories

Transcription

1 Connections and terminals Line terminal X Power-D-Box with sockets pre-wired Line terminal (max. 63 A) X max. tightening torque 3.0 Nm busbar X1, X2 blade terminals 6.3 mm pull-out max. 10 N cable cross section mm 2 Caution: cables must not be connected with terminal plugged in Load output terminal protected X against reverse polarity X X BGT-2-X8340-S02 19BGT-2-X8340-SZ4 X8340-S02 X8340-SZ4 Load output terminal proteced against reverse polarity (set: 4 moduled sleeves, 8 blade terminals 6.3 x 0.8 mm) X for cable cross section mm 2 X for cable cross section mm 2 X for cable cross section mm Screw terminal X Module 1plus Screw terminal for busbar Y X non insulated (max. 35 m 2 ) - 1

2 Labels Label marking area 6 x 10 mm /.629 x.394 in. Y Label white Y ordering unit 10 pcs = 1 strip Module 1plus Label marking area 16 x 13 mm /.629 x.512 in. Y Label white Y ordering unit 24 pcs = 1 plate 19BGT-2-X83S2 19BGT-2-X83S4 19BGT-2-X83Z4 19BGT-2-X8345 Label markine area 46 x 13 mm / 1.81 x.512 in. Y Label white Y ordering unit 8 pcs = 1 plate 19BGT BGT BGT-2-ESX10 19BGT-2-X

3 Blanking piece Blanking piece Y BGT BGT /3900 Blanking piece for Power-D-Box (circuit breaker types 3600/3900, 2210) Y Blanking piece Y BGT-2-ESX10 Blanking piece for Power-D-Box (circuit breaker types ESS20, ESX10) Y Blanking piece Y BGT-2-X BGT-2-X83S2 19BGT-2-X83S4 19BGT-2-X83Z4 Blanking piece for Power-D-Box (circuit breaker types 8345, X8345-D01) Y

4 Power distribution systems - accessories Mounting aids Retaining clip for electronic circuit breaker ESS20/ESX10 recommended for fitting the devices Y Retaining clip Y Module 1 plus mit ESS20 Module 1 plus mit ESX GERMANY Retaining clip for circuit breaker 3600/3900/E-1048/E-109 recommended for fitting the devices retaining clip Y top view ø mounting dimension 1 2(k) (i) Retaining clip Y socket type 1... Module 1plus with 3600 with E E E E E E Retaining clip for circuit breaker 2210 recommended for fitting single pole devices Y top view retaining clip Retaining clip Y socket type 1... Module 1plus with with ø1 mounting dimension (k) (i) Retaining clip for circuit breaker 3600/3900/E-1048/E-109 recommended for fitting the devices Y P10-Si 63-P10-Si polarized blade terminals DIN A (QC.2) x 6.8 = x.268 = retaining clip Retaining clip Y socket type socket type with 3600 with E E E E E E polarized recess max. 30 max

5 Power distribution systems - accessories Mounting aids Retaining clip Y Retaining clip for circuit breaker 2210-S... recommended for fitting single pole devices Y socket type socket type with 2210-S... with 2210-S P10-Si 63-P10-Si polarized blade terminals DIN A (QC.2) retaining clip x 6.8 = x.268 = polarized recess max. 30 max Screw and washer X set with 4 screw and 4 washers in a plastic bag Screw and washer screw for mounting the Power-D-Box (19BGT) X BGT-... Sufficient for mounting one Power-D-Box Barrier Y BGT-2-X8345 X8345-D01 Barrier for isolating the load terminals of the Power-D-Box (High-Power) Y End bracket X Module 1plus socket type 1 End bracket recommended for fixing on symmetrical rails X

6 Busbars and jumpers Insulated wire bridge X packaging quantity: 10 pcs Insulated wire bridge X packaging quantity 1 pc = 10 wire bridges SVS. Bus bar 32 A X blue insulated, 0 mm X red insulated, 0 mm X grey insulated, 0 mm Bus bar 32 A X blue X red X grey Module 1plus Bus bar A Y non insulated, 0 mm Bus bar A Y Module 1plus Bus bar for line entry on the side (in combination with screw terminal X ) Y non insulated, 0 mm Busbar Y for line entry on the side Module 1plus Jumper X Jumper X old version Module 1plus SVS. 19BGT BGT /3900 9BGT-2-ESX10 New version see jumper SB-S11-P A terminals 1+2 no connection terminals 6+ bridged blade terminals DIN A Signalbrücke Signal loop X

7 Busbars and jumpers Jumper SB-S11-P A Module 1 plus SVS... 19BGT BGT /390 19BGT-2-ESX10 Jumper SB-S11-P A Germany Signalbrücke Signal loop SB-S11-P A xxxx top view Signalbrücke Signal loop blade terminals DIN A Connector bus link -P10 X / 1.5 mm 2, brown (up to 13 A max. load) X / 2.5 mm 2, black (up to 20 A max. load) X / 2.5 mm 2, red (up to 20 A max. load) X / 2.5 mm 2, blue (up to 20 A max. load) 100 quick-connect tabs 6.3 (.2) DIN 4624 tinned brass, insulated Bus bar A for socket 63-P10-Si X blade terminal DIN A6.3x0.8 max. 25 A ~ terminals bridged Connector bus link -P10 X (brown) X (black) X (red) X (blue) Power-D-Box with sockets X Bus bar A X Power-D-Box with socketsx insulation to VBG4 translucent bus bar max. A female connector 6.3 DIN 4624 Ms, max. 25 A -

8 Tools Withdrawal tool for ESS20 /ESX10 Y with ESS with ESX10 Withdrawal tool Y BGT-2-ESX Withdrawal tool for removing circuit breaker type 8345 X Withdrawal tool X BGT-2-X8345 X8345-D Withdrawal tool for removing circuit breaker type 2210-S291 X Withdrawal tool X BGT-2-X2210 X2210-S06-8