ACE BACKSTAGE CO., INC.
|
|
- Preston Garrison
- 5 years ago
- Views:
Transcription
1 ACE BACKSTAGE CO. PUSH PUSH CLEAR COM DMX12 ACE BACKSTAGE CO., INC. STAGE POCKET SYSTEMS Avenue Rockefeller Suite 200 Valencia, CA Issue: #068 Tel: Fax: Web: STAGE POCKET SYSTEMS PANEL FABRICATION CONNECTIVITY NOW AVAILABLE! Download DWG & DXF AutoCAD Specs at SPEC FABRICATION CONNECTRIX SYSTEM STAGE MANAGEMENT Stage Pocket Systems /// Panel Fabrication /// Spec Fabrication /// Stage Management /// Connectivity
2 CATALOG & MODEL NUMBER INDEX CATALOG INDEX MODEL NUMBER INDEX PRODUCT DESCRIPTION PAGE AC Electric Isolation Kit Back Access Covers Back Boxes (Pour Boxes) Bracket Kit Assemblies CONNECTRIX System... 9 Connectors, Connectrix and Stock Choir Stick Microphones Custom Panel Materials Custom Spec Panel/Pocket Fabrication Double Wide Stage Pockets Electric Pocket Panels Full Stage Pocket Half Stage Pocket Microphone Hanger Slug Microphone Softpod Mini Stage Pocket Panel Connector Loading and Engraving Panel Materials and Specifications Panel Selection Guide... 4 Panels, Connectrix Pocket... 9 Panels, Connectrix Rack Panels, Connectrix Wall Panels, Switchcraft Pocket Pocket Selection Guide... 3 Rack Mount Ears and Shelf Kits Super Stage Pocket Super Double Wide Stage Pocket Wall Boxes CONTACT INFORMATION Company: Ace Backstage Co., Inc. Address: Avenue Rockefeller Suite 200 Valencia, CA Telephone: Fax: orders@acebackstage.com Web Site: TERMS OF SALE This publication (Issue: #068) is produced by Ace Backstage Co., Inc. and no responsibility for errors and omissions is assumed. All rights reserved Ace Backstage Co., Inc. Subject to change without notice. More information on Ace Backstage Co. s Terms of Sale may be reviewed on the web at or call and speak with our sales associates. FULL STAGE POCKETS - VERTICAL SLANT PANEL #122CLBK...Full Pocket w/ Black Powder Coat Finish & Carpet Lid #122CLCV...Full Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #122LLBK...Full Pocket w/ Black Powder Coat Finish & Locking Lid Assembly #122SLBK...Full Pocket w/ Black Powder Coat Finish & Standard Lid #122SLCV...Full Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #222CLBR...Full Pocket w/ Brushed Brass Finish & Carpet Lid #222SLBR...Full Pocket w/ Brushed Brass Finish & Brass Lid #322CLSS...Full Pocket w/ Stainless Steel Finish & Carpet Lid #322SLSS...Full Pocket w/ Stainless Steel Finish & Stainless Steel Lid HALF STAGE POCKETS - VERTICAL SLANT PANEL #123CLBK...Half Pocket w/ Black Powder Coat Finish & Carpet Lid #123CLCV...Half Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #123LLBK...Half Pocket w/ Black Powder Coat Finish & Locking Lid Assembly #123SLBK...Half Pocket w/ Black Powder Coat Finish & Standard Lid #123SLCV...Half Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #223CLBR...Half Pocket w/ Brushed Brass Finish & Carpet Lid #223SLBR...Half Pocket w/ Brushed Brass Finish & Brass Lid #323CLSS...Half Pocket w/ Stainless Steel Finish & Carpet Lid #323SLSS...Half Pocket w/ Stainless Steel Finish & Stainless Steel Lid DOUBLE WIDE STAGE POCKETS - VERTICAL SLANT PANEL #124CLBK...Double Wide Pocket w/ Black Powder Coat Finish & Carpet Lid #124CLCV...Double Wide Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #124LLBK...Double Wide Pocket w/ Black Powder Coat Finish & Locking Lid Assembly #124SLBK...Double Wide Pocket w/ Black Powder Coat Finish & Standard Lid #124SLCV...Double Wide Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #224CLBR...Double Wide Pocket w/ Brushed Brass Finish & Carpet Lid #224SLBR...Double Wide Pocket w/ Brushed Brass Finish & Brass Lid #324CLSS...Double Wide Pocket w/ Stainless Steel Finish & Carpet Lid #324SLSS...Double Wide Pocket w/ Stainless Steel Finish & Stainless Steel Lid MINI STAGE POCKETS - VERTICAL SLANT PANEL #025BK...Mini Pocket w/ Black Powder Coat Finish #025BR...Mini Pocket w/ Brushed Brass Finish #025CV...Mini Pocket w/ Copper Vein Powder Coat Finish SUPER STAGE POCKETS - HORIZONTAL PANEL #132CLBK...Super Pocket w/ Black Powder Coat Trim Bezel & Carpet Lid #132CLCV...Super Pocket w/ Copper Vein Powder Coat Trim Bezel & Carpet Lid #132LLBK...Super Pocket w/ Black Powder Coat Finish & Locking Lid Assembly #132SLBK...Super Pocket w/ Black Powder Coat Trim Bezel & Standard Lid #132SLCV...Super Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #232CLBR...Super Pocket w/ Brushed Brass Trim Bezel & Carpet Lid #232SLBR...Super Pocket w/ Brushed Brass Trim Bezel & Brass Lid #332CLSS...Super Pocket w/ Stainless Steel Trim Bezel & Carpet Lid #332SLSS...Super Pocket w/ Stainless Steel Trim Bezel & Stainless Steel Lid SUPER DOUBLE WIDE STAGE POCKETS - HORIZONTAL PANEL #134CLBK...Super Double Wide Pocket w/ Black Powder Coat Trim Bezel & Carpet Lid #134CLCV...Super Double Wide Pocket w/ Copper Vein Powder Coat Trim Bezel & Carpet Lid #134LLBK...Super Double Wide Pocket w/ Black Powder Coat Finish & Locking Lid Assembly #134SLBK...Super Double Wide Pocket w/ Black Powder Coat Trim Bezel & Standard Lid #134SLCV...Super Double Wide Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #234CLBR...Super Double Wide Pocket w/ Brushed Brass Trim Bezel & Carpet Lid #234SLBR...Super Double Wide Pocket w/ Brushed Brass Trim Bezel & Brass Lid #334CLSS...Super Double Wide Pocket w/ Stainless Steel Trim Bezel & Carpet Lid #334SLSS...Super Double Wide Pocket w/ Stainless Steel Trim Bezel & Stainless Steel Lid STAGE POCKET ACCESSORIES #22BAC...Full Pocket Back Access Cover...16 #23BAC...Half Pocket Back Access Cover...16 #24BAC...Double Wide Pocket Back Access Cover...16 #BRK102BBX...Super Pocket Back Box & Bracket Kit Assembly...16 #BRK104BBX...Super Double Wide Pocket Back Box & Bracket Kit Assembly...16 #DB...Steel Duplex Cover Panel, Punched For Narrow Single Gang...8 #DC...Steel Duplex Cover Panel, Blank For Narrow Single Gang...8 BACK BOXES #102BBX...Full Pocket Back Box...17 #102BBXW...Full Pocket Back Box, Polyurethane Encapsulated...17 #102DDBBX...Full Pocket Back Box, Double Deep, 10 x 10 x #102DDBBXW...Full Pocket Back Box, Double Deep, Polyurethane Encapsulated, 10 x 10 x #103BBX...Half Pocket Back Box...17 #103BBXW...Half Pocket Back Box, Polyurethane Encapsulated...17 #104BBX...Double Wide Pocket Back Box...17 #104BBXW...Double Wide Pocket Back Box, Polyurethane Encapsulated...17 #104DDBBX...Double Wide Pocket Back Box, Double Deep, 10 x 18 x #104DDBBXW...Double Wide Pocket Back Box, Double Deep, Polyurethane Encapsulated, 10 x 18 x #025BBX...Mini Pocket Back Box...17 #025BBXAC...Mini Pocket Back Box w/ A.C. Divider...17 #SO Super Back Box, Extra Deep, 10 x 10 x #SO-200W...Super Back Box, Extra Deep, Polyurethane Encapsulated, 10 x 10 x #SO Super Double Wide Back Box, Extra Deep, 10 x 18 x #SO-201W...Super Double Wide Back Box, Extra Deep, Polyurethane Encapsulated, 10 x 18 x WALL BOXES #WB-8x8x4...Wall Box 8 x 8 x #WB-10x10x4...Wall Box 10 x 10 x #WB-12x12x4...Wall Box 12 x 12 x ELECTRIC PANELS #A/C ISO KIT...A.C. Electric Isolation Kit...15 #PE...Single Gang Electric Duplex Switch Box w/ Steel Mounting Panel...15 #FP3E...Triple Gang Electric Duplex Switch Box w/ Aluminum Mounting Panel...15 STAGE POCKET PANELS - STOCK ( CONNECTRIX ) #PNL Aluminum Panel - Blank, 4-1/2 X 3-11/ #PNL Aluminum Panel - Machined 2 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 3 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 4 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 5 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 6 Connectrix Cutouts...9 #PNL Aluminum Panel - Blank, 4-1/2 X 7-3/8...9 #PNL Aluminum Panel - Machined 4 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 6 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 8 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 10 Connectrix Cutouts...9 #PNL Aluminum Panel - Machined 12 Connectrix Cutouts...9 #PNL Aluminum Panel - Blank, 9-1/32 X 7-3/8...9 #PNL Aluminum Panel - Machined 25 Connectrix Cutouts...9 STAGE POCKET PANELS - STOCK (SWITCHCRAFT ) #PSW Aluminum Panel - Machined 2 Switchcraft Cutouts...15 #PSW Aluminum Panel - Machined 3 Switchcraft Cutouts...15 #PSW Aluminum Panel - Machined 4 Switchcraft Cutouts...15 #PSW Aluminum Panel - Machined 5 Switchcraft Cutouts...15 #PSW Aluminum Panel - Machined 6 Switchcraft Cutouts...15 STAGE POCKET PANELS, MINI - STOCK ( CONNECTRIX ) #MP Aluminum Panel - Blank, 2-9/16 X 2-7/ #MP Aluminum Panel - Machined 1 Connectrix Cutout...9 #MP Aluminum Panel - Machined 2 Connectrix Cutouts...9 #MP Aluminum Panel - Machined 1 Connectrix & 1 S-Video Cutout...9 #MP Aluminum Panel - Machined 1 Connectrix & 1 ICC Cutout...9 #MP Aluminum Panel - Machined 2 Neutrik Cutouts...9 #MP Aluminum Panel - Machined 1 Neutrik & 1 ICC Cutout...9 #MP Aluminum Panel - Machined 1 Neutrik & 1.38 Cutout...9 #MP Aluminum Panel - Machined 1 Neutrik Cutout, Centered...9 #MP Aluminum Panel - Machined 1 ICC & 1 15-Pin Cutout, Centered...9 #MP Aluminum Panel - Machined 1 ICC Cutout, Centered...9 #MP Aluminum Panel - Machined 1 ICC Cutout, Left or Right...9 #MP Aluminum Panel - Machined 1 Inline #DAV101CM Cutout...9 #MP Aluminum Panel - Machined 1 A.C. Cutout, Centered...9 #MP Aluminum Panel - Machined 1 A.C. Cutout, Left or Right...9 #MP Aluminum Panel - Machined 1 VGA Cutout, Centered...9 RACK PANELS, BLACK - STOCK ( CONNECTRIX ) #RPL Aluminum Panel - Single Space Rack Panel Blank, 19 X 1-3/ #RPL Aluminum Panel - Single Space Rack Panel Machined 10 Connectrix Cutouts...10 #RPL Aluminum Panel - Two Space Rack Panel Blank, 19 X 3-1/ #RPL Aluminum Panel - Two Space Rack Panel Machined 30 Connectrix Cutouts...10 #RPL Aluminum Panel - Three Space Rack Panel Blank, 19 X 5-1/ #RPL Aluminum Panel - Three Space Rack Panel Machined 45 Connectrix Cutouts...10 WALL PANELS, BLACK - STOCK ( CONNECTRIX ) #WP Aluminum Panel - Single Gang Wall Panel Blank, 4-1/2 X 2-3/ #WP Aluminum Panel - Double Gang Wall Panel Blank, 4-9/16 X 4-1/ #WP Aluminum Panel - Triple Gang Wall Panel Blank, 6-3/8 X 4-1/ #WP Aluminum Panel - Four Gang Wall Panel Blank, 8-3/16 X 4-1/ #WP Aluminum Panel - Six Gang Wall Panel Blank, 11-13/16 X 4-1/ #WP Aluminum Panel - Single Gang Wall Panel Machined 1 Connectrix Cutout...11 #WP Aluminum Panel - Single Gang Wall Panel Machined 2 Connectrix Cutouts...11 #WP Aluminum Panel - Double Gang Wall Panel Machined 4 Connectrix Cutouts...11 #WP Aluminum Panel - Double Gang Wall Panel Machined 6 Connectrix Cutouts...11 #WP Aluminum Panel - Triple Gang Wall Panel Machined 6 Connectrix Cutouts...11 #WP Aluminum Panel - Triple Gang Wall Panel Machined 8 Connectrix Cutouts...11 #WP Aluminum Panel - Four Gang Wall Panel Machined 8 Connectrix Cutouts...11 #WP Aluminum Panel - Four Gang Wall Panel Machined 12 Connectrix Cutouts...11 #WP Aluminum Panel - Six Gang Wall Panel Machined 12 Connectrix Cutouts...11 #WP Aluminum Panel - Six Gang Wall Panel Machined 16 Connectrix Cutouts...11 WALL PANELS, WHITE - STOCK ( CONNECTRIX ) #WP Aluminum Panel - Single Gang Wall Panel Blank, 4-1/2 X 2-3/ #WP Aluminum Panel - Double Gang Wall Panel Blank, 4-9/16 X 4-1/ #WP Aluminum Panel - Triple Gang Wall Panel Blank, 6-3/8 X 4-1/ #WP Aluminum Panel - Four Gang Wall Panel Blank, 8-3/16 X 4-1/ #WP Aluminum Panel - Six Gang Wall Panel Blank, 11-13/16 X 4-1/ #WP Aluminum Panel - Single Gang Wall Panel Machined 1 Connectrix Cutout...11 #WP Aluminum Panel - Single Gang Wall Panel Machined 2 Connectrix Cutouts...11 #WP Aluminum Panel - Double Gang Wall Panel Machined 4 Connectrix Cutouts...11 #WP Aluminum Panel - Double Gang Wall Panel Machined 6 Connectrix Cutouts...11 #WP Aluminum Panel - Triple Gang Wall Panel Machined 6 Connectrix Cutouts...11 #WP Aluminum Panel - Triple Gang Wall Panel Machined 8 Connectrix Cutouts...11 #WP Aluminum Panel - Four Gang Wall Panel Machined 8 Connectrix Cutouts...11 #WP Aluminum Panel - Four Gang Wall Panel Machined 12 Connectrix Cutouts...11 #WP Aluminum Panel - Six Gang Wall Panel Machined 12 Connectrix Cutouts...11 #WP Aluminum Panel - Six Gang Wall Panel Machined 16 Connectrix Cutouts ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
3 POCKET SELECTION GUIDE STANDARD VERTICAL SLANT PANEL POCKETS STANDARD GENERAL USE VERTICAL SLANT PANEL POCKETS feature welded, heavy-duty steel construction, choice of 2 decorator oven cured powder coat finishes (inside and outside), 2 lid choices, and a host of standard and custom AV and/or electric panels with connectors. Solid Brass or Solid Stainless Steel Lid and Mounting Flanges also available (by special order) POCKET OPTIONS A) LID TYPE: 1) Standard Flush Hinged Lid 2) Recessed Carpet Flush Hinged Lid B) FINISH TYPE: 1) Textured Black Powder Coat Finish 2) Antique Coppervein Powder Coat Finish 3) Solid Brass with Brushed Finish 4) Solid Stainless Steel with Brushed Finish C) CONNECTRIX and SWITCHCRAFT POCKET PANELS Panel Series Fits These Pockets 1) MP-100 Series Panels...Mini only 2) MP-200 Series Panels...Mini only 3) PNL-100 Series Panels...Half, Full, Double Wide 4) PNL-120 Series Panels...Full, Double Wide 5) PSW-100 Series Panels...Half, Full, Double Wide More info on STANDARD POCKETS see pages 5-6 More info on STANDARD PANELS see page 9 #025XX MINI POCKET PGS 5-6 PGS 5-6 CAPACITY: Up to (4) Connectrix Connectors on (2) Mini Panels #122XXXX FULL POCKET PGS 5-6 PGS 5-6 CAPACITY: Up to (12) Connectrix Connectors or (6) Connectrix Connectors and (1) Duplex Electric Outlet Panel #123XXXX HALF POCKET CAPACITY: Up to (6) Connectrix Connectors or (1) Duplex Electric Outlet Panel #124XXXX DOUBLE WIDE POCKET CAPACITY: Up to (24) Connectrix Connectors or (18) Connectrix Connectors and (1) Duplex Electric Outlet Panel SUPER HORIZONTAL PANEL POCKETS SUPER CAPACITY HORIZONTAL PANEL POCKETS feature the same rugged, heavy-duty welded steel construction, lid types, and finishes as Standard Pockets but with a detachable Trim Bezel-Lid Assembly and horizontal panel mounting brackets installed within the Pocket Back Box Bodies. Super Pockets provide more than twice the capacity of our standard pockets with the same in-floor appearance. Super Pockets will accept a host of standard and custom AV and/or electric panels/connectors POCKET OPTIONS A) LID TYPE: 1) Standard Flush Hinged Lid 2) Recessed Carpet Flush Hinged Lid B) FINISH TYPE: 1) Textured Black Powder Coat Finish 2) Antique Coppervein Powder Coat Finish 3) Solid Brass with Brushed Finish 4) Solid Stainless Steel with Brushed Finish C) CONNECTRIX and SWITCHCRAFT POCKET PANELS Panel Series Fits These Pockets 1) PNL-100 Series Panels...Super and Super Double Wide 2) PNL-120 Series Panels...Super and Super Double Wide 3) PNL-140 Series Panels...Super and Super Double Wide 4) PSW-100 Series Panels...Super and Super Double Wide 132XXXX SUPER POCKET PGS 7-8 PGS 7-8 CAPACITY: Up to (24) Connectrix Connectors plus (2) Duplex Electric Outlet Panels in an isolated raceway #134XXXX SUPER DOUBLE WIDE POCKET CAPACITY: Up to (48) Connectrix Connectors or multiple audio, communications, control, data, electric, sub-d, video, and voice connection panels More info on SUPER POCKETS see pages 7-8 More info on STANDARD PANELS see page 9 CONNECTRIX SYSTEM READY All ACE Stage Pockets will accept CONNECTRIX System Panels and Connector configurations UL Listed Compliance Standard UL Listed when used in conjunction with ACE specified parts *Note: Connector capacity limitations apply depending on connectors and panels used. ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 3
4 PANEL SELECTION GUIDE STOCK CONNECTRIX PANELS & CONFIGURATIONS STOCK CONNECTRIX POCKET PANELS (#MP-100, #PNL-100, #PNL-120, and #PNL-140 SERIES) Standard Pocket Panels are created from high strength aluminum alloy (6061-T6) that is.062 thick. Each standard pocket panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving pocket panels is fast and easy using a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. All ACE panels will mount separately or in combination in Mini, Half, Full, Double Wide, Super, and Super Double Wide Pockets. The machined CONNECTRIX style cutouts combine the popular mounting pattern of the Neutrik D and Switchcraft E series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. Using the CONNECTRIX system panels it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNC s, dual RCA s, mic jacks, speaker jacks, and numerous other standard connectors without a single custom punch. Utilizing ACE s Stock CONNECTRIX System Panels and Connectors allows quick order processing, with most orders shipping within 24 hours of reciept of purchase order. STAGE POCKET CONNECTRIX PANEL CAPACTIES CONNECTRIX SERIES PANEL MODEL NUMBERS MP-100 Panels PE Panels PNL-100 Panels PNL-120 Panels PNL-140 Panels Panel Page # STAGE POCKETS PANEL CAPACITY Mini: 2X Half: - 1X - 1X - - Full: - 2X 1X 2X 1X - Double Wide: - 4X 2X 4X 2X - Super: X 2X 1X Super Double Wide: - 8X 4X 8X 4X 2X POSSIBLE STANDARD & SUPER STAGE POCKET CONNECTRIX PANEL CONFIGURATIONS MINI HALF FULL DOUBLE WIDE SUPER SUPER DOUBLE WIDE 4 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
5 STANDARD POCKET DETAILS & FEATURES STANDARD VERTICAL SLANT PANEL POCKET FEATURES STANDARD POCKET DESCRIPTION The Full, Half, Double Wide, and Mini Stage Pockets are all vertical slant panel flush stage pockets made of heavy duty steel. The pockets may be used to conceal audio, communications, control, data, electric AC power, switches, video, and voice connections etc. below the floor surface for easy access and to prevent connector damage. Standard Stage Pockets are available in various capacities and feature an interchangeable panel system which permits easy custom connector/panel configurations. Half Stage Pocket #123SLBK Installed *Half Pocket shown with optional #PNL-106 CONNECTRIX Panel loaded with (6) CONNECTRIX connectors (left) and (right) shown installed in-floor appearance DURABLE CONSTRUCTION Welded steel construction of Standard Stage Pocket Lids, Mounting Flanges, and Pocket Bodies resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8 (nominally 11 ga. (.120 )) thick CRS steel while the Pocket Body is made from 16 ga. (.062 ) thick CRS steel. SPRING LOADED HINGE PINS Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (#CL), Locking Lid (#LL), Standard Lid (#SL) and other custom application lids. Double Wide Stage Pocket #124SLCV CABLE WAY SLOTS Generous 3/8 x 4 /8 /16 Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure closes the slot when not in use. EASY INSTALLATION Easy installation into square or rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel and device terminations. DECORATOR FINISHES Standard Stage Pockets are available with a scratch/wear resistant finish. Oven cured powder coat applied inside and outside the entire Standard Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. Solid Brass and Solid Stainless Steel Lids and Mounting Flanges with brushed finishes are also available by special order. Standard Full Stage Pocket #122SLBK RUBBER LID STOPS Rubber lid stops prevent lid rattle. See panels PG 9 and connectors PGS *Shown with optional #PE Single Gang Electric AC Panel and #PNL-106 CONNECTRIX Panel loaded with (6) #C (#NC3FPP) SPECIFICATIONS Full Stage Pocket Size: Full Stage Pocket Body Size: W x H x D Full Stage Pocket Lid & Mounting Flange Size: W x H x D Half Stage Pocket Size: Half Stage Pocket Body Size: W x H x D Half Stage Pocket Lid & Mounting Flange Size: W x H x D Double Wide Stage Pocket Size: Double Wide Stage Pocket Body Size: W x H x D Double Wide Stage Pocket Lid & Mounting Flange Size: W x H x D Mini Stage Pocket Size: Mini Stage Pocket Body Size: W x H x D Mini Stage Pocket Lid & Mounting Flange Size: W x H x D Standard Full Brass Stage Pocket Installed INSTALLATION CUTOUT DIMENSIONS Installation Cutout Dimensions for Stage Pockets: Full Stage Pockets: W x H Half Stage Pockets: W x H Double Stage Wide Pockets: W x H Mini Stage Pockets: W x H UL LISTED Standard Stage Pockets (Half, Full, and Double Wide) meet UL compliance Standard 514A file FLOOR BOX 44LK Suitable for raised floor applications. The Mini Pocket is not UL Listed. MATERIALS Standard Stage Pocket Lids and Mounting Flanges are made of 1/8 (nominally 11 ga. (.120 )) thick CRS steel while the Stage Pocket Bodies are made from 16 ga. (.062 ) thick CRS steel. The exception to these are the Solid Brass and Stainless Steel Stage Pocket Lids and Mounting Flanges which are made of 1/8 (nominally 11 ga. (.120 )) thick Half Hard Solid Brass and 1/8 (nominally 11 ga. (.120 )) thick Stainless Steel respectively, with a Stage Pocket Body made from 16 ga. (.062 ) thick CRS steel. INCLUDES Standard Pockets Include: (1) Stage Pocket Body with Mounting Flange (1) Lid (2) Hinge Pins (2) Springs (8 or 16) #8 Self Tapping Sheet Metal/Wood Screws (1 or 2) Slot Closure(s) CONNECTOR CAPACITY Standard Stage Pockets will accept Connectrix, Neutrik, and Switchcraft type Connectors. The pocket connector capacities are as follows: Pocket Size Connector Capacity Mini Pocket...*3-4 Connectors Half Pocket... 6 Connectors Full Pocket Connectors Double Wide Pocket Connectors *Note: Connector capacity limitations apply depending on connectors and panels used. ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 5
6 STANDARD POCKET DETAILS & FEATURES STANDARD VERTICAL SLANT PANEL POCKET FEATURES PANEL CAPACITY Standard Stage Pockets will accept Connectrix and Switchcraft system Panels. The pocket panel capacities are as follows: Mini Pocket accepts: (2) #MP-100 Series CONNECTRIX Panels OR (2) #MP-200 Series Switchcraft Panels Half Pocket accepts: (1) #PNL-100 Series CONNECTRIX Panel OR (1) #PSW-100 Series Switchcraft Panel OR (1) #PE Series Single Gang Electric Duplex Switch Box Panel Full Pocket accepts: (2) #PNL-100 Series CONNECTRIX Panels OR (2) #PSW-100 Series Switchcraft Panels OR (2) #PE Series Single Gang Electric Duplex Switch Box Panels OR (1) #PNL-120 Series CONNECTRIX Panel OR (1) #FP3E Series Triple Gang Electric Duplex Switch Box Panel Double Wide Pocket accepts: (4) #PNL-100 Series CONNECTRIX Panels OR (4) #PSW-100 Series Switchcraft Panels OR (4) #PE Series Single Gang Electric Duplex Switch Box Panels OR (2) #FP3E Series Triple Gang Electric Duplex Switch Box Panels OR (2) #PNL-120 Series CONNECTRIX Panels CONNECTRIX CONNECTORS CONNECTRIX Connectors use Neutrik D Mounting Hole Patterns for Greater Flexibility CONNECTRIX connectors may be used in any CONNECTRIX panels allowing a customized panel to be loaded and shipped immediately. CONNECTRIX connectors incorporate many industry standard audio, data, video, and voice connectors mounted on a plastic adaptor which provides ground isolation between the panel and connector. When ordering, please specify ACE Connector Model Number along with loading instructions and Panel Model Number (#PNL-100 Series, #PNL-120 Series, or #PNL-140 Series). NOTE: Specific High Density (HD) and Sub- D pattern connectors will require either 2 or 3 CONNECTRIX Horizontal Spaces or 2 or 3 CONNECTRIX Vertical Spaces, depending on connectors selected. Connectors are loaded into panels with black aluminum pop rivets. You may choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. CONNECTRIX SYSTEM POCKET PANELS Many pre-cut stock CONNECTRIX System Panels (See page 9) and Switchcraft System Panels (See page 15) are available for Standard Stage Pockets. Stock CONNECTRIX and Switchcraft Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16 (.062 ) thick. The stock panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the pocket mounting holes. Each Standard CONNECTRIX and Switchcraft Panel is finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined CONNECTRIX style cutouts use the popular mounting patterns of the Neutrik D series and Switchcraft E series connectors. A generous rectangular cutout mates with a growing array of standard CONNECTRIX connectors. Using CONNECTRIX Panels it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The #23BAC #22BAC #24BAC Back Access Covers (#BAC) SEE PAGE 16 FOR #BAC S benefit is a fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery! POCKET ACCESSORIES Standard Stage Pockets are available with a variety of accessories that will help complete the Stage Pocket System. The following accessories are available for all Standard Vertical Slant Panel Stage Pockets: BACK ACCESS COVERS (#BAC) Model Number Description #22BAC... Back Access Cover, Full #23BAC...Back Access Cover, Half #24BAC... Back Access Cover, Double Wide The #23BAC, #22BAC and #24BAC are closures for the back access opening on ACE Half, Full, and Double Wide Pockets, respectively (See Page 16). The BAC provides 1/2 and 3/4 combination conduit knock-outs for easy conduit terminations. #103BBX #102BBX #104BBX Back Boxes (#BBX) SEE PAGE 17 FOR #BBX S MINI POCKET INSTALLED IN #025BBX Use the BAC with Half, Full, or Double Wide Pocket installations requiring wiring closure. (The ACE #BBX Back Boxes, #PE, and #FP3E Electrical Panels cannot be used with the BAC.) The BAC is easy to install onto ACE Standard Pocket Bodies and permits many connectivity options in the typical installation sequence. BACK BOXES (#BBX) Model Number Description #025BBX...Back Box, Mini #102BBX... Back Box, Full #103BBX...Back Box, Half #104BBX... Back Box, Double Wide The #102BBX, #103BBX and #104BBX Back Boxes are welded 14 gauge steel with a protective lid that is discarded when the pocket body is finally installed (See Page 17). The box and lid have a clear zinc corrosion resistant finish. A 1/2 mounting flange is predrilled to mate with the pocket body flange. The pocket body assembly is 4.5 deep and the back box is 6 deep providing a 1.5 work clearance in the bottom of the back box (ideal for feed thru or distribution junction). Ace Back Boxes come with standard Electrical Conduit Combination 1/2, 3/4, 1, and 1-1/4 Knock Outs, 2 places typical on opposing sides and Electrical Conduit Combination 1/2 and 3/4 Knock Outs, 1 place typical on opposing sides. POCKET LIDS (#CL, #LL, #SL) Model Number Description #CL... Carpet Lid #LL...Locking Lid #SL...Standard Lid Most Standard Stage Pockets are available with optional Lid Assemblies including Carpet Lids (#CL), Locking Lids (#LL), and Standard Lids (#SL). Locking Lid Assemblies come with one (1) of three (3) different types of keyed locks (See Page 8). Note: No Carpet or Locking Lids for Mini Pockets). 6 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
7 SUPER POCKET DETAILS & FEATURES SUPER HORIZONTAL PANEL POCKET FEATURES SUPER POCKET DESCRIPTION ACE Super Pockets use horizontally mounted panels to allow for more than twice the capacity of our Standard Stage Pockets. Panel mounting brackets are installed in the Back Box Body and combined with a detachable Trim Bezel-Lid and Mounting Flange Assembly. These pockets are rugged, constructed from welded steel and available with a choice of durable finishes. Super and Super Double Wide Pockets have the same in-floor footprint as Standard Full and Double Wide Stage Pockets. The basic construction incorporates 3 sub-assemblies (see images below). A unique Trim Bezel-Lid Assembly (C) with spring loaded blind hinge pins and a hinged cableway slot closure mounts directly to the Back Box (B). Assembled in the Back Box is a set of panel mounting and AC barrier isolation raceway brackets (A) (#BRK102 and #BRK104). The Trim Bezel-Lid is a heavy duty welded 11 gauge (.120 thick) steel, solid brass or solid stainless steel assembly. Each Bezel is available with either a flat flush standard lid (#SL) or a recessed carpet lid (#CL). Steel Bezels with flush flat lids come in 2 powder coat finishes: antique copper vein or textured black. Solid Brass and Solid Stainless Steel have a brushed finish and are available on a special order basis. The HORIZONTAL PANEL in the Super Pockets are designed for high capacity connectivity. In less than one square foot (10.5 x10.5 ) the Super Pocket provides abundant panel space for up to 25 CONNECTRIX connectors* and a barrier isolated raceway ready for 2 duplex electric outlets (multiple circuits). In less than two square feet (10.5 x18.5 ) the Super Double Wide Pocket provides abundant panel space for up to 50 CON- NECTRIX connectors*. This large connectivity capacity is made possible by using a Horizontal Panel Design and a set of panel mounting and A.C. barrier isolation raceway brackets (Super Pocket only). Generous combination conduit knockouts A Super Stage Pocket Assembly #BRK102 Bracket Kit Assembly C #BZ132SLBK Trim Bezel-Lid B #BRK102BBX Super Pocket Body D #132SLBK Super Pocket on four sides provide in-out-and-thru ways for both low voltage and AC electric cabling. The Super Pocket panel system is unique and flexible. Use any combination of standard ACE CNC machined CONNECTRIX Pocket Panels or choose a custom made to order aluminum panel. Generous clearances above and below the panel(s) permit easy termination and access to loaded connectors and other devices. LARGE TO EXTRA LARGE CAPACITY Super Stage Pockets accommodate #PNL- 100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 CONNECTRIX, Neutrik, or Switchcraft type connectors*. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft type connectors. Super Stage Pocket #132SLBK See panels PG 9 and connectors PGS *Super Pocket with Bracket Kit assembly installed. INSET: optional Custom Panels installed. See Panels PG 9/Connectors PGS DURABLE CONSTRUCTION Welded steel construction of Super Stage Pocket Trim Bezel-Lid Mounting Flange Assemblies and Pocket Back Box Bodies resist bending under even the most severe stage loads. Trim Bezel-Lid and Mounting Flange is made from 1/8 (nominally 11 ga. (.120 )) thick CRS steel while the Super Pocket Back Box Body is made from 14 ga. (.071 ) thick CRS steel. SPRING LOADED HINGE PINS Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (#CL), Locking Lid (#LL), Standard Lid (#SL) and other custom application lids. CABLE WAY SLOTS Generous 3/8 x 8 /16 Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure attached Super Double Wide Pocket Fully Populated Super Double Wide Pocket #134SLBK with CONNECTRIX Panels #PNL-1425 (left), #PNL-1212 (top right), and #PNL-106 (bottom right). (1) #PE Single Gang Electric AC Panel (bottom right) is also installed. to the Trim Bezel-Lid Assembly closes the slot when not in use. EASY INSTALLATION Easy installation into 10 x 10 square (Super) or 10 x 18 rectangular (Super Double Wide) cutout in stage floor. Open, easy access from the top of the stage pocket allows simple connector/panel and device terminations. DECORATOR FINISHES Super Stage Pockets are available with a scratch/ wear resistant finish. Oven cured powder coat is applied inside and outside the entire Trim Bezel- Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. Solid Brass and Solid Stainless Steel Trim Bezel-Lids and Mounting Flanges with brushed finishes are also available by special order. The Pocket Back Box Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II. RUBBER LID STOPS Rubber lid stops prevent lid rattle. SPECIFICATIONS Super Stage Pocket Size: Super Stage Pocket Body Size: W x H x D Super Pocket Trim Bezel Lid & Mounting Flange Size: W x H x D Super Double Wide Stage Pocket Size: Super Double Wide Stage Pocket Body Back Box Size: W x H x D Super Double Wide Pocket Trim Bezel Lid & Mounting Flange Size: W x H x D INSTALLATION CUTOUT DIMENSIONS Installation Cutout Dimensions for Stage Pockets: Super Stage Pocket Install Cutout Dimensions: W x H Super Double Wide Stage Pocket Install Cutout Dimensions: W x L *Note: Connector capacity limitations apply depending on connectors and panels used. ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 7
8 SUPER POCKET DETAILS & FEATURES SUPER HORIZONTAL PANEL POCKET FEATURES Super Pockets Installed Super Pocket w/ Solid Brass Trim Bezel and recessed carpet lid (left) and Super Pocket w/ Solid Stainless Steel Trim Bezel and standard lid Super Double Wide Solid Stainless Steel Trim Bezel and recessed carpet lid UL LISTED Super Stage Pockets (Super and Super Double Wide) meet UL compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK. MATERIALS Super Stage Pocket Trim Bezel-Lid and Mounting Flange Assemblies are made of 1/8 (nominally 11 ga. (.120 )) thick CRS steel while the Super Stage Pocket Back Box Body is made from 14 ga. (.071 ) thick CRS steel. The exception to these are the Solid Brass and Solid Stainless Steel Super Stage Pocket Trim Bezel-Lid and Mounting Flange Assemblies which are made of 1/8 (nominally 11 ga. (.120 )) thick Half Hard Solid Brass and 1/8 (nominally 11 ga. (.120 )) thick Stainless Steel, respectively. INCLUDES Super Pockets Include: (1) Super Pocket Back Box Body w/ Bracket Kit (1) Trim Bezel-Lid and Mounting Flange Assembly (1 or 2) Hinged Slot Closure (attached to Trim Bezel) (2) Hinge Pins (2) Springs (8 or 16) #8 Self Tapping Sheet Metal/Wood Screws CONNECTOR CAPACITY Super Stage Pockets will accept CONNECTRIX, Neutrik, or Switchcraft type Connectors. The pocket connector capacities are as follows: Pocket Size Connector Capacity Super Pocket... *25 Connectors Super Double Wide Pocket... *50 Connectors PANEL CAPACITY Super Stage Pockets will accept CONNECTRIX and Switchcraft system Panels. The pocket panel capacities are as follows: Super Pocket accepts: (4) #PNL-100 Series CONNECTRIX Panels OR (4) #PSW-100 Series Switchcraft Panels OR (2) #PNL-120 Series CONNECTRIX Panels OR (1) #PNL-140 Series CONNECTRIX Panels Super Double Wide Pocket accepts: (8) #PNL-100 Series CONNECTRIX Panels OR (8) #PSW-100 Series Switchcraft Panels OR (8) #PE Series Single Gang Electric Duplex Switch Box Panels OR (4) #FP3E Series Triple Gang Electric Duplex Switch Box Panels OR (4) #PNL-120 Series CONNECTRIX Panels OR (2) #PNL-140 Series CONNECTRIX Panels CONNECTRIX CONNECTORS CONNECTRIX Connectors use Neutrik D Mounting Hole Patterns for Greater Flexibility CONNECTRIX connectors may be used in any CONNECTRIX panels allowing a customized panel to be loaded and shipped immediately. CONNECTRIX connectors incorporate many industry standard audio, data, video, and voice connectors mounted on a plastic adaptor which provides ground isolation between the panel and connector. When ordering, please specify ACE Connector Model Number along with loading instructions and Panel Model Number (#PNL-100 Super Double Wide Pocket Flexibility A B (A) Super Double Wide Stage Pocket C with installed Bracket Kit Assembly. This pocket can support up to 48 connectors in the same size area as the Double Wide Pocket. (B) Panels mounted into pocket utilizing the panel mounting Bracket Kit Assembly (which is preassembled for quick and easy panel/connector loading). (C) View of Pocket with Trim Bezel-Lid. Series, #PNL-120 Series, or #PNL-140 Series). NOTE: Specific High Density (HD) and Sub- D pattern connectors will require either 2 or 3 CONNECTRIX Horizontal Spaces or 2 or 3 CONNECTRIX Vertical Spaces, depending on connectors selected. Connectors are loaded into panels with black aluminum pop rivets. You may choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. CONNECTRIX SYSTEM POCKET PANELS Many pre-cut stock CONNECTRIX System Panels (See Page 9) and Switchcraft System Panels (See Page 15) are available for Super Stage Pockets. Standard CONNECTRIX and Switchcraft Panels are created from high strength, tough, aircraft aluminum alloy (6061- T6) that is 1/16 (.062 ) thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the pocket mounting holes. Each Standard CONNECTRIX and Switchcraft Panel is finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined CONNECTRIX style cutouts use popular mounting patterns of the Neutrik D series and Switchcraft E series connectors. A generous rectangular cutout mates with a growing array of standard CONNECTRIX connectors. Using CONNECTRIX Panels it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock ACE panels. The benefit is a fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. POCKET ACCESSORIES Super Stage Pockets are available with a variety of accessories that will help complete the Stage Pocket System. The Lid options below are available for both Standard and Super Stage Pockets: POCKET LIDS (#CL, #LL, #SL) Model Number Description #CL... Carpet Lid #LL...Locking Lid #SL...Standard Lid Stage Pockets are available with optional Lid Assemblies including Carpet Lids (#CL), Locking Lids (#LL), and Standard Lids (#SL). The Locking Lid Assemblies are available with (1) of (3) different types of keyed locks, shown below. Locking Lid Assembly Options (#LL) A B C A) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included) B) Lock (H): Standard 5/32 Allen Key Wrench (key included) C) Lock (K): Tubular Butterfly Key Lock (key included) Steel Duplex Cover Panels A) #DB Punched and B) #DC Blank Super Stage Pocket steel duplex cover panels A B *Note: Connector capacity limitations apply depending on connectors and panels used. 8 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
9 CONNECTRIX SYSTEM POCKET PANELS CONNECTRIX POCKET PANEL DESCRIPTION STOCK CONNECTRIX SYSTEM ALU- MINUM PANELS (#MP-100, #PNL-100, #PNL-120, AND #PNL-140 SERIES) MEAN CONNECTIVITY USING NEUTRIK D MOUNTING HOLE PATTERNS STOCK CONNECTRIX ALUMINUM PANELS #PNL-100 SERIES The CONNECTRIX System expands connectivity possibilities utilizing a new panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock ACE panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. The CONNECTRIX Pocket Panels (#MP-100, #PNL-100, #PNL-120, #PNL-140) are flat and strong. The Panels are made from high strength aluminum alloy (6061- T6) that is.062 thick. The CONNECTRIX Pocket Panels are machined, powder coated, and in stock for immediate delivery. The panels may be preloaded with CONNECTRIX connectors and engraved with your specifications, creating a unique, customized panel with a short delivery time. Using the CONNECTRIX System Panel it is possible to mount various combinations of CONNECTRIX Connectors without a single custom punch. By implementing the #C-15100, #C-25100, #C-26100, or #C Series of connectors (See Pages 12-14), ACE can create a custom Stage Pocket Panel that will work in most any installation applications. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE CONNECTRIX System Panels will mount separately or in combination in all ACE Stage Pockets. #PNL-100 #PNL-102 #PNL-103 #PNL-104 #PNL-105 #PNL-106 #PNL-120 SERIES #PNL-120 #PNL-124 #PNL-126 #PNL-128 #PNL-1210 #PNL-1212 #PNL-140 SERIES #MP-100 SERIES #MP-101 #MP-102 #MP-100 SERIES STOCK #MP-100 #MP-103 #MP-104 #PNL-140 #PNL-1425 CONNECTRIX SYSTEM CUTOUT MATERIAL SPECS #MP-105 #MP-106 #MP DIA HOLE 2 PLACES.130R (2 PLCS).7500 MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) Thick FINISH: Electro-static applied oven-cured black semi-gloss powder coat FABRICATION: CNC Rotary Machined, Engraved #MP-108 #MP-109 #MP-110 LOCATE CTR.9500 #MP-111 #MP-112 #MP #MP-114 #MP-115 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 9
10 CONNECTRIX SYSTEM RACK PANELS CONNECTRIX RACK PANEL DESCRIPTION STOCK CONNECTRIX ALUMINUM RACK PANELS #RPL-100 SERIES #RPL-100 Blank Rack Panel (above) and #RPL-110 CONNECTRIX Rack Panel with 10 CONNECTRIX Mounts (below), One Space MATERIAL SPECS MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semi-gloss powder coat FABRICATION: CNC Rotary Machined, Engraved #RPL-200 SERIES #RPL-200 Blank Rack Panel (above) and #RPL-230 CONNECTRIX Rack Panel with 30 CONNECTRIX Mounts (below), Two Space 9 24 #RPL-300 SERIES #RPL-300 Blank Rack Panel (above) and #RPL-345 CONNECTRIX Rack Panel with 45 CONNECTRIX Mounts (below), Three Space STOCK CONNECTRIX SYSTEM ALU- MINUM RACK PANELS (#RPL-100/200/300 SERIES) MEAN CONNECTIVITY USING NEUTRIK D MOUNTING HOLE PAT- TERNS The CONNECTRIX Rack Panel System expands connectivity possibilities utilizing a panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock ACE panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. The CONNECTRIX System Rack Panels (#RPL-100, #RPL-200, and #RPL-300 Series) are flat and strong. The Panels are made from high strength aluminum alloy (6061-T6) that is.125 thick (1/8 ). Because they are CNC rotary machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. These panels are stocked in standard EIA 1, 2, and 3 space 19 rack panels. The CONNECTRIX System Rack Panels are easily engraved. Each standard panel is finished with electro-static applied, oven cured black semi-gloss powder coat. Engraving ACE Rack Panels is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. The machined CONNECTRIX cutouts combine the popular mounting pattern of the Neutrik D and Switchcraft E series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted CONNECTRIX connectors. Using the CONNECTRIX System Rack Panel it is possible to mount various combinations of CONNECTRIX Connectors without a single custom punch. By implementing the #C-15100, #C-25100, #C-26100, or #C Series of connectors (See Pages 12-14), ACE can create a custom Rack Panel that will work in most any installation application. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE CONNECTRIX System Rack Panels will mount in Standard Space EIA Rack Mounts. 10 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
11 CONNECTRIX SYSTEM WALL PANELS CONNECTRIX WALL PANEL DESCRIPTION STOCK CONNECTRIX SYSTEM ALUMI- NUM WALL PANELS (#WP-100, #WP-200, #WP-300, #WP-400, and #WP-600 SERIES) MEAN CONNECTIVITY USING NEUTRIK D MOUNTING HOLE PATTERNS The CONNECTRIX Wall Panel System expands connectivity possibilities utilizing a panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock standard ACE panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-theshelf stock prices and immediate delivery. The CONNECTRIX System Wall Panels (#WP-100, #WP-200, #WP-300, #WP-400, and #WP-600 Series) are flat and strong. The Panels are made from high strength aluminum alloy (6061-T6) that is.062 thick (1/16 ). Because they are CNC rotary machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. These panels are stocked in an assortment of standard gang wall panels. The CONNECTRIX System Rack Panels are easily engraved. Each standard wall panel is finished with electro-static applied, oven cured black or white semi-gloss powder coat. Engraving ACE Wall Panels is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. The machined CONNECTRIX cutouts combine the popular mounting pattern of the Neutrik D and Switchcraft E series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted CONNECTRIX connectors. STOCK CONNECTRIX ALUMINUM WALL PANELS #WP-100 #WP-200 SERIES #WP-300 SERIES #WP-400 SERIES #WP-100 #WP-200 #WP-300 #WP-400 #WP-101 #WP-204 #WP-306 #WP-408 #WP-102 #WP-206 #WP-308 #WP-4012 #WP-600 SERIES #WP-600 Using the CONNECTRIX System Wall Panel it is possible to mount various combinations of CONNECTRIX Connectors without a single custom punch. By implementing the #C-15100, #C-25100, #C-26100, or #C Series of connectors (See Pages 12-14), ACE can create a custom Wall Panel that will work in most any installation application. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE CONNECTRIX System Wall Panels will mount in Standard Gang Wall Mounts and each is supplied with #6 screws. #WP-6012 #WP-6016 MATERIAL SPECS MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) Thick FINISH: Electro-static applied oven-cured black or white semigloss powder coat FABRICATION: CNC Rotary Machined, Engraved ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 11
12 STOCK CONNECTRIX CONNECTORS STOCK CONNECTRIX SYSTEM CONNECTORS STOCK CONNECTRIX CONNECTORS UTILIZE NEUTRIK D MOUNTING HOLE PATTERN FOR FLEXIBILITY Stock CONNECTRIX System Connectors may be used in any CONNECTRIX System Panels. Utilizing the popular mounting patterns of Neutrik D Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted CONNECTRIX connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock CONNECTRIX system connectors is constantly changing, so please visit us on the web at for current product information. When ordering, please specify model number and type of connector as well as panel model number (#MP-100 Series, #PNL-100 Series, #PNL-120 Series, or #PNL-140 Series) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 CONNECTRIX Horizontal Spaces or 2 or 3 CONNECTRIX Vertical Spaces, depending on connectors selected. STOCK STANDARD, DOUBLER, & TRIPLER MOUNT CONNECTRIX CONNECTORS #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
13 STOCK CONNECTRIX CONNECTORS STOCK CONNECTRIX CONNECTORS DESCRIPTION C SERIES CONNECTRIX CONNECTORS MODEL # DESCRIPTION #C Neutrik 3-Pin Nylon Female Connector (#NC3FPP) #C Neutrik 3 Pin Nylon Male Connector (#NC3MPP) #C Neutrik D-Series 3-Pin Locking Female Connector (#NC3FDL1-BAG) #C Neutrik D-Series 3-Pin Male Panel Mount Connector (#NC3MDL1-BAG) #C Neutrik 4-Pin Nylon Female Connector (#NC4FPP) #C Neutrik D-Series 4-Pin Female Connector (#NC4FDL1-BAG) #C Neutrik D-Series 5-Pin Locking Female Connector (#NC5FDL1-BAG) #C Neutrik D-Series 5-Pin Male Connector (#NC5MDL1) #C Neutrik RJ45-Cat5/110 IDC Panel Mount Connector (#NE8FDV-Y110) #C Neutrik 1/4 Mono Locking Phone Jack (#NJ3FP6C-BAG) #C Neturik Speak-On Locking Connector (#NL4MP) #C Neutrik Blank Plug (#DBA) #C-15113*...Neutrik D-Series Combo Speakon and 1/4 Panel Mount Connector (#NLJ2MDV) #C Neutrik D-Series USB A to USB B Panel Mount Connector (#NAUSBB) #C Neutrik D-Series Firewire 6-Pin to 6-Pin Panel Mount Connector (#NA13946B) #C Neutrik D-Series 3-Pin Locking Female Connector, Gold Contacts (#NC3FDL1B) #C Neutrik D-Series 3-Pin Locking Male Connector, Gold Contacts (#NC3MDL1B) #C Neutrik D-Series 6-Pin Male Connector (#NC6MDL-1-BAG) #C Neutrik 3-Pin Female Screw Terminal (#NC3FDSID) #C Neutrik 3-Pin Male Screw Terminal (#NC3MDSID) C SERIES CONNECTRIX CONNECTORS MODEL # DESCRIPTION #C mm Stereo Feed Through #C BNC Isolated Solder Type #C BNC Isolated Feed Through #C CATV Isolated Solder Type #C CATV Isolated Feed Through #C RCA Isolated Solder Type - Black Insulator #C RCA Isolated Solder Type - Red Insulator #C RCA Isolated Solder Type - Yellow Insulator #C RCA Isolated Solder Type - White Insulator #C Dual RCA on DBA, Engraved L & R #C RCA Isolated Feed Through #C RCA-BNC Isolated Feed Through #C S-Video Solder Type on DBA #C MIDI Isolated Solder Type #C ADP/RJ11: Feed Through #C ADP/RJ45: Feed Through #C ADP/RJ45-CAT5: Feed Through #C ICC Blank on DBA #C ICC Blank with Hole on DBA #C ICC BNC Feed Through on DBA #C ICC CATV Feed Through on DBA #C DISCONTINUED #C ICC RJ11 Solid Wire on DBA #C ICC RJ45 Solid Wire on DBA #C ICC RJ45/CAT3 Solid Wire on DBA #C ICC RJ45/CAT5 Solid Wire on DBA #C ICC Fiber Optic on DBA #C #11 Switchcraft on DBA #C #12 Switchcraft on DBA #C Rocker Switch on DBA, DPDT ON-ON #C mm Stereo on DBA #C Recessed BNC Feed Through #C Recessed RCA to BNC #C Recessed RCA Feed Through #C Recessed S-Video Feed Through #C #41 Switchcraft Mono 1/8 Isolated C SERIES CONNECTRIX CONNECTORS MODEL # DESCRIPTION #C Gender Bender, 25-Pin, Female to Female, Requires 2 Vertical Spaces* #C Gender Bender, 25-Pin, Male to Male, Requires 2 Vertical Spaces* #C Sub-D 25-Pin, Female to Solder Cups, Requires 2 Vertical Spaces* #C Sub-D 25-Pin, Male to Solder Cups, Requires 2 Vertical Spaces* #C Gender Bender, HD 15-Pin, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, HD 15-Pin, Male to Male, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Gender Bender, 9-Pin, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, 9-Pin, Male to Male, Requires 2 Horizontal Spaces* #C Sub-D 9-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 9-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Screw Terminals, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Screw Terminals, VGA Only, Requires 2 Horizontal Spaces* #C HD 15-Pin, Male to Screw Terminals, Requires 2 Horizontal Spaces* #C Pin, Female to Screw Terminals, Requires 2 Horizontal Spaces* #C USB Coupler A to B, Requires 2 Horizontal Spaces* #C Firewire Coupler Type 1 Shielded, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Female w/ Stereo Mini Jack, Requires 2 Horizontal Spcs* #C DVI Feed Through, Female to Female, Requires 2 Horizontal Spaces* C SERIES CONNECTRIX CONNECTORS MODEL # DESCRIPTION #C Gender Bender, 25-Pin, Female to Female, Requires 2 Vertical Spaces* #C Gender Bender, 25-Pin, Male to Male, Requires 2 Vertical Spaces* #C Sub-D 25-Pin, Female to Solder Cups, Requires 2 Vertical Spaces* #C Sub-D 25-Pin, Male to Solder Cups, Requires 2 Vertical Spaces* #C Gender Bender, HD 15-Pin, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, HD 15-Pin, Male to Male, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Gender Bender, 9-Pin, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, 9-Pin, Male to Male, Requires 2 Horizontal Spaces* #C Sub-D 9-Pin, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 9-Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Screw Terminals, Requires 2 Horizontal Spaces* #C HD 15-Pin, Female to Screw Terminals, VGA Only, Requires 2 Horizontal Spaces* #C HD 15-Pin, Male to Screw Terminals, Requires 2 Horizontal Spaces* #C Pin, Female to Screw Terminals, Requires 2 Horizontal Spaces* C SERIES CONNECTRIX CONNECTORS MODEL # DESCRIPTION #C (5) BNC Solder Cups on Tripler, Requires 3 Horizontal Spaces* #C (5) BNC Feed Through on Tripler, Requires 3 Horizontal Spaces* ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 13
14 CUSTOM CUT PANEL CONNECTORS STOCK CUSTOM CUT PANEL CONNECTORS STOCK CUSTOM PANEL CONNECTORS ACE s Stock Custom Cut Panel Connectors may be mounted on any custom panel using our panel fabrication and engraving facilities. All of ACE s Custom Connectors will require a Custom CNC Rotary Machined Cutout (i.e. custom cut panel) which will require a longer lead time. Call the Ace Custom Desk at for more info on our stock custom panel connectors, custom panels, mounting requirements, and turnaround times. The current selection of Stock Custom Cut Panel Connectors is constantly changing, so please visit us on the web at www. acebackstage.com for current product information. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C STOCK CUSTOM CUT PANEL CONNECTORS #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C MODEL # DESCRIPTION MANUFACTURER MODEL # #C Neutrik 3-Pin Nylon Female Connector... (#NC3FPP) #C Neutrik 3 Pin Nylon Male Connector...(#NC3MPP) #C Neutrik D-Series 3-Pin Locking Female Connector...(#NC3FDL1-BAG) #C Neutrik D-Series 3-Pin Male Panel Mount Connector...(#NC3MDL1-BAG) #C Neutrik 4-Pin Nylon Female Connector... (#NC4FPP) #C Neutrik D-Series 4-Pin Female Connector...(#NC4FDL1-BAG) #C Neutrik D-Series 5-Pin Locking Female Connector...(#NC5FDL1-BAG) #C Neutrik D-Series 5-Pin Male Connector...(#NC5MDL1) #C Neutrik Combo Female XLR & 1/4 Panel Mount Connector...(#NCJ6FI-S) #C Neutrik RJ45-CAT5/110 IDC Panel Mount Connector...(#NE8FDV-Y110) #C Neutrik 1/4 Mono Locking Phone Jack...(#NJ3FP6C-BAG) #C Neutrik Speak-On Locking Connector...(#NL4MP) #C Neutrik Blank Plug...(#DBA) #C Neutrik D-Series Combo Speakon & 1/4 Panel Mount Connector...(#NLJ2MDV) #C Neutrik D-Series USB A to USB B Panel Mount Connector...(#NAUSBB) #C Neutrik D-Series Firewire 6-Pin to 6-Pin Panel Mount Connector...(#NA13946B) #C Neutrik D-Series 3-Pin Locking Female Connector, Gold Contacts...(#NC3FDL1B) #C Neutrik D-Series 3-Pin Locking Male Connector, Gold Contacts...(#NC3MDL1B) #C Neutrik D-Series 6-Pin Male Connector...(#NC6MDL-1-BAG) #C Neutrik 3-Pin Female to Screw Terminal Panel Mount Connector...(#NC3FDSID) #C Neutrik 3-Pin Male to Screw Terminal Panel Mount Connector...(#NC3MDSID) #C Switchcraft 3-Pin Panel Mount Locking Female Connector... (#D3F) #C Switchcraft 3-Pin Panel Mount Locking Male Connector...(#D3M) #C Switchcraft 4-Pin Panel Mount Female Connector... (#D4F) #C Switchcraft 4-Pin Panel Mount Male Connector...(#D4M) #C Switchcraft 5-Pin Panel Mount Female Connector... (#D5F) #C Switchcraft 5-Pin Panel Mount Male Connector...(#D5M) #C Switchcraft 6-Pin Panel Mount Female Connector... (#D6F) #C Switchcraft 6-Pin Panel Mount Male Connector...(#D6M) #C Switchcraft 1/4 Mono Phone Jack...(#11) #C Switchcraft 1/4 Stereo Phone Jack...(#12) #C Switchcraft 1/8 Mini Jack...(#41) #C Plug Blank #C Plug Blank with Hole #C BNC Feed Through Female to Female #C F CATV Feed Through Female to Female #C Trim Bezel in Biege #C Trim Bezel in Black #C Trim Bezel in Blue #C Trim Bezel in Green #C Trim Bezel in Red #C Trim Bezel in White #C Trim Bezel in Yellow #C DISCONTINUED #C DISCONTINUED #C RJ11 Solid Wire Voice/Data #C RJ11 Feed Through #C DISCONTINUED #C RJ45 CAT 3 Feed Through #C RJ45 CAT 3 UnKeyed Solid Wire #C RJ45 CAT 5 High Speed Solid Wire #C RJ45 CAT 5 Feed Through #C Fiber Optic Feed Through #C Gender Bender, 25-Pin, Female to Female Connector #C Gender Bender, 25-Pin, Male to Male Connector #C Sub D Panel Mount, 25-Pin, Female to Solder Type Connector #C Sub D Panel Mount, 25-Pin, Male to Solder Type Connector #C Gender Bender, High Density, 15-Pin, Female to Female Connector #C Gender Bender, High Density, 15-Pin, Male to Male Connector #C High Density Panel Mount 15-Pin, Female to Female Connector #C High Density Panel Mount 15-Pin, Male to Male Connector #C Sub D Panel Mount 15-Pin, Female to Female Connector #C Sub D Panel Mount 15-Pin, Male to Male Connector #C Gender Bender, 9-Pin, Female to Female Connector #C Gender Bender, 9-Pin, Male to Male Connector #C Sub D Panel Mount, 9-Pin, Female to Female Connector #C Sub D Panel Mount, 9-Pin, Male to Male Connector #C High Density Panel Mount, 15-Pin, Female to Screw Terminal Connector #C High Density Panel Mount, 15-Pin, Male to Screw Terminal Connector #C High Density Panel Mount, 15-Pin, Male to Screw Terminal Connector #C DB9, 9-Pin, Female to Screw Terminal Connector #C BNC Solder Type, Isolated and Hardware - 75 ohm Connector #C BNC Feed Through and Hardware - 75 ohm Connector #C BNC Solder Type, Isolated and Hardware - 50 ohm Connector #C RCA to BNC Feed Through Connector #C RCA Jack to Solder Terminals (Black Insulator Ring) #C RCA Jack to Solder Terminals (Red Insulator Ring) #C RCA Jack to Solder Terminals (White Insulator Ring) #C RCA Jack to Solder Terminals (Yellow Insulator Ring) #C RCA Feed Through Connector #C Dual Banana Jack Panel Mount Connector #C CATV to Solder Terminals Connector and Hardware #C CATV Feed Through Connector and Hardware #C Midi 5-Pin, Solder Type to Screw Terminals Connector #C Midi 5-Pin, Solder Type to Rivet Holes Connector #C S-Video to Screw Terminals Connector #C S-Video Feed Through Connector #C mm Stereo Panel Mount Solder Type Jack #C mm Stereo Panel Mount Female to Female Feed Through Connector #C Edison Snap in Single Receptacle w/ Heavy Wire Leads #C DISCONTINUED #C RCA-Dual Jacks to Solder Terminals, Isolated (Red/Black) #C Rocker Switch #C S-Video to Solder Type Panel Mount Connector #C Recessed D Cut Panel Mount, Blank #C S-Video Feed Through Connector #C BNC to Solder Type Connector, Isolated with Hardware - 75 ohm #C BNC Feed Through Connector, Isolated with Hardware - 75 ohm #C RCA Feed Through Connector, Isolated with Hardware - 75 ohm #C USB Coupler A to B Panel Mount Connector #C Firewire Coupler Type 1 Shielded Panel Mount Connector #C DVI Feed Through, Female to Female Panel Mount Adapter #C HDMI Feed Through, Female to Female Panel Mount Adapter 14 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
15 ELECTRIC & SWITCHCRAFT PANELS STOCK ELECTRIC POCKET PANELS STOCK ELECTRIC ALUMINUM POCKET PANELS (#PE and #FP3E) WITH STAN- DARD GANG SWITCH BOXES The Standard 110VAC connections in ACE pockets is easy using compliant switch boxes and Electric Pocket Panel assemblies. The #PE (single gang box) and the #FP3E (three gang box) Electric Panels provide for one or three standard duplex outlets, respectively. These items are UL listed in conjunction with UL listed ACE pockets. When properly installed with isolating AC wiring conduit, combining low voltage connections in the same pocket should not be an issue. Consult your local building codes for any specific application. Each assembly is complete with single duplex or Stock Standard Electric Panels triple duplex switch box, black powder-coated steel mounting plate, and a narrow aluminum and/or steel black powder-coated cover plate with mounting screws. The #PE and #FP3E will install in Half, Full, Double Wide, and Super Double Wide Pockets (Super Pocket already has set of panel mounting and AC barrier isolation raceway brackets.) All ACE Electric Panels will mount in Standard gang switch boxes. A/C ELECTRIC ISOLATION KIT The A.C. and low voltage wiring must be isolated from each other in Stage Floor Pockets installed in back boxes (BBX) which include both low voltage terminations and #PE panel(s) for A.C. Electric Panel Assembly connections. This kit provides the UL Listed conduit parts for isolated routing of the A.C. wires inside the back box, and is suitable for use in Full and Double Wide Back Boxes. A.C. wiring and terminations should be done only by a qualified electrician. A/C Electric Isolation Kit Includes #A/C ISO KIT - 1/2 Conduit A.C. Electrical Isolation Kit A - (1) #RACO Non-Metallic Extra-Flex Conduit B - (1) #RACO º Swivel Connector C - (1) #RACO Straight Connector D - (1) #GRC COUPLING... Coupling, Female-to-Female A B C D A B A B C D A A/C Electric Isolation Kit Installation B A) #PE Single Gang Duplex Switch Box with Steel Mounting Panel and Steel Narrow Duplex Cover B) #FP3E Triple Gang Duplex Switch Box with Steel Mounting Panel and Aluminum Narrow Duplex Cover Typical assembly of #FP3E Electric Panel includes: A) 1 - Triple Gang Duplex Switch Box B) 1 - Steel Mounting Panel with black powder coat C) 3-3-Wire Grounding Duplex Outlets (not included) D) 1 - Aluminum Narrow Triple Duplex Cover with black powder coat Top view of an #A/C ISO KIT installed in a #102BBX Back Box without (A) and with (B) the Full Stage Pocket Body. STOCK SWITCHCRAFT POCKET PANELS MATERIAL SPECS MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) Thick FINISH: Electro-static applied oven-cured black or white semigloss powder coat FABRICATION: CNC Rotary Machined, Engraved STOCK SWITCHCRAFT ALUMINUM PANELS #PSW-100 SERIES #PSW-100 #PSW-102 #PSW-103 #PSW-104 #PSW-105 #PSW-106 STOCK STANDARD SWITCHCRAFT ALUMINUM PANELS (#PSW-100 SERIES) The machined Switchcraft cutouts use the popular mounting pattern of the Switchcraft D series connectors and are made with a precise, CNC cutout that mates perfectly with the connectors. Switchcraft Panels (#MP-200, #MP-201, #PSW-102, #PSW-103, #PSW-104, #PSW-105, and #PSW-106) are created from high strength aluminum alloy (6061-T6) that is.062 thick. Each standard Switchcraft panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the Switchcraft panel is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished Switchcraft panels show bright aluminum in the engraved characters and need not be back filled. ACE Switchcraft panels are flat, strong, and rigid. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. All ACE Switchcraft panels will mount separately or in combination in all ACE Stage Pockets. Using the Switchcraft System Panels it is possible to mount various combinations of Switchcraft Connectors without a single custom punch. By implementing the #C Series of connectors (See Page 14), ACE can create a custom Switchcraft Panel that will work in most any installation application. Switchcraft Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 15
16 BACK ACCESS COVERS & BRACKET KITS BACK ACCESS COVERS (BAC) BACK ACCESS COVERS (#BAC) The #22BAC, #23BAC and #24BAC are closures for the back access opening on the ACE Full Pockets, Half Pockets, and Double Wide Pockets, respectively. The BAC provides 1/2 and 3/4 combination conduit knock-outs for easy conduit terminations. Use the BAC with Half, Full, or Double Wide Pocket installations requiring wiring closure (larger ACE #BBX Series Back Boxes, #PE, and, #FP3E Electric Panels cannot be used with the BAC). The BAC is easy to install onto the Half, Full, or Double Wide Pocket body and permits many options in a typical installation sequence. The BAC is precision formed to slide onto the back access opening of the pocket body. During rough-in the BAC may be connected to the combination knock outs, 1/2 or 3/4, with flex conduit and temporarily left tacked to the floor joist approximately where the pocket is to be installed. All wire can then be pulled and low voltage terminations to various connectors completed and ready for final installation into the pocket. The BAC is smaller than the cutout in the stage floor and can easily be pulled through the cutout for assembly to the pocket body. Two self-tapping sheet metal attachment screws are provided. The pocket assembly can then be dropped into the stage cutout and all the panel/plate sub-assemblies finally installed. The BAC provides a closure for the open back access architecture of the Double, Full and Half Pockets while maintaining the benefits of easy installation. The sequence of installation can be varied such that all terminations are completed early in the job. At final installation simply screw the parts together and screw the pocket into floor. Or wait until the final install phase and do all the terminations, assembly and pocket body installation. #23BAC BACK ACCESS COVER #22BAC BACK ACCESS COVER #24BAC BACK ACCESS COVER Back Access Cover for Half Stage Pockets Back Access Cover for Full Stage Pockets Back Access Cover for Double Wide Stage Pockets #22BAC Full Pocket Back Access Cover installation is completed quickly & easily in 3 steps MATERIAL SPECS MATERIAL: 14 Gauge Sheet Steel CRS (.071 Thick) FINISH: Clear Zinc, Mil Spec QQ-Z-325E Type I, Class II FABRICATION: Precision die formed UL LISTED UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK BRACKET KIT ASSEMBLIES (BRK) BRACKET KIT ASSEMBLIES (#BRK) ACE Bracket Kit Assemblies #BRK102 (A1) and #BRK104 (B1) may be installed in Standard Full Pocket Back Boxes (A2) and Double Wide Pocket Back Boxes (B2). Once Bracket Kit Assemblies have been installed in their respective Back Boxes (A3) and (B3), the resulting products (with #BZ132SLBK and #BZ134SLBK Trim Bezel-Lid Assemblies also added) are the Super Pockets (A4) and Super Double Wide Pockets (B4). #BRK102 #102BBX #BRK102BBX #132SLBK A1 A2 A3 A4 #BRK104 #104BBX #BRK104BBX #134SLBK B1 B2 B3 B4 16 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
17 BACK BOXES STANDARD & WET BACK BOXES (BBX-BBXW) BACK BOXES (#BBX) The #102BBX, #103BBX and #104BBX Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. A 1/2 mounting flange is predrilled to mate with the pocket body flange. The pocket body assembly is 4.5 deep and the back box is 6 deep providing a 1.5 work clearance in the bottom of the back box (ideal for feed thru or distribution junction). The clearance volume is 445 sq. in. in the #104BBX, 146 sq. in. in the #102BBX, and 92 sq. in. in the #103BBX. ACE Back Boxes come with standard Electrical Conduit Combination 1/2, 3/4, 1, and 1-1/4 Knock Outs, 2 places typical on opposing sides (see Knock Outs labeled A on diagrams to the right) and Electrical Conduit Combination 1/2 and 3/4 Knock Outs, 1 place typical on opposing sides (see Knock Outs labeled B on diagrams to the right). IN-GRADE WET APPLICATION BACK BOXES POLYURETHANE ENCAPSU- LATED (#BBXW) Now polyurethane encapsulated back boxes are available to provide for IN-GRADE applications. Using our standard double zinc plated back boxes (BBX), a 1/16 thick jacket of polyurethane is applied to the exterior sides and bottom of the Back Boxes permanently bonding with surfaces to form a watertight and airtight shield. All seams, holes, and knock-outs are effectively sealed against the incursion of moisture and water. The polyurethane encapsulated back boxes provide great protection against abrasion, chemicals, impact, and harsh climates. All polyurethane encapsulated back boxes in the Stage Pocket Accessories Back Box section will have a model number suffix of W. DOUBLE DEEP BACK BOXES (#DDBBX) Double Deep Back Boxes are also available from ACE. The #102DDBBX and #104DDBBX are Double Deep Back Boxes which are twice as deep (12 ) as Standard #BBX Series Back Boxes (6 ) and may be used exclusively with ACE Full and Double Wide Stage Pockets, respectively. EXTRA DEEP BACK BOXES (#SO) ACE Extra Deep Back Boxes (#SO-200 and #SO- 201) provide a work clearance area of 3.5 in the bottom of the back box (Standard #BBX Series Back Boxes provide 1.5 of work clearance area). This additional space is ideal for feed thru or distribution junction situations. The Extra Deep Back Boxes may be used exclusively with ACE Full and Double Wide Stage Pockets, respectively. GENERAL INSTALLATION OF BACK BOXES (#BBX) The #102BBX, #103BBX and #104BBX Back Boxes are designed exclusively for use with ACE Full, Half, and Double Wide Pockets, respectively. Set the back box securely braced into the floor to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Standard electrical conduit may be connected to the back box on any side via combination knock-outs. The protective cover is discarded when the finished pocket is installed. Mating screw holes are provided to secure the pocket flange to the back box flange. MATERIAL SPECS MATERIAL: 14 Gauge Sheet Steel CRS (.071 Thick) FINISH: Clear Zinc, Mil Spec QQ-Z-325E Type I, Class II FABRICATION: Precision die formed and jig welded UL LISTED UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK STANDARD (BBX) & POLYURETHANE ENCAPSULATED (BBXW) BACK BOXES #025BBX #102BBX #103BBX #104BBX #SO-200 #SO-201 #102DDBBX #104DDBBX Back Box for Mini Pocket Back Box for Full Pocket Back Box for Half Pocket Back Box for Double Wide Pocket Back Box Extra Deep for Full Pocket Back Box Extra Deep for Double Wide Pocket Back Box Double Deep for Full Pocket Back Box Double Deep for Double Wide Pocket #025BBX/AC #102BBXW #103BBXW #104BBXW #SO-200W #SO-201W #102DDBBXW #104DDBBXW Back Box for Mini Pocket w/ac Divider Back Box Poly Coated for Full Pocket Back Box Poly Coated for Half Pocket Back Box Poly Coated for Double Wide Pocket Back Box Poly Coated & Extra Deep for Full Pocket Back Box Poly Coated & Extra Deep for Double Wide Pocket Back Box Poly Coated & Double Deep for Full Pocket Back Box Poly Coated & Double Deep for Double Wide Pocket ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 17
18 PANEL CONNECTOR LOADING, ENGRAVING CONNECTRIX & SWITCHCRAFT PANEL LOADING & ENGRAVNG CONNECTRIX AND SWITCHCRAFT PANEL CONNECTOR LOADING AND ENGRAVING SPECIFICATIONS CONNECTRIX and Switchcraft System Panels maintain standard CONNECTRIX and Switchcraft cutout positions for either CONNECTRIX or Switchcraft connector layouts. CONNECTRIX AND SWITCHCRAFT PANEL ENGRAVING SPECIFICATIONS Character Height Max: 1/8 (.125 ) or 9 point type Font Standard: Single Stroke Stick Character Text Font Alignment: Centered above connector/component CONNECTRIX SYSTEM PANELS include: POCKET PANELS RACK PANELS WALL PANELS Using ACE s stock Connector Panels makes it easy to design, produce, and engrave custom panels. Taking advantage of stock ACE Connectors and Panels allows quick order processing and shipment of panels in a timely fashion. Customizing Switchcraft System Panels in-field is easy using a drill and chassis punch, permitting on site custom connector panel configurations. Text Font Alignment Switchcraft: Number of Characters: Panel Materials Engraved: Engraving Standard: Backfill Characters: Connector Loading: Centered above connector/component in top row and as space permits below connector/component in bottom row 8 (including spaces) Aluminum, Acrylic Sheet, Plastic Laminants Finished panels show bright aluminum, need not be backfilled Using enamel or acrylic paint (white panels only) Black aluminum pop rivets or removable machine screws & locking nuts CONNECTRIX PANEL ENGRAVING EXAMPLE Custom CONNECTRIX #PNL-106 panel with custom CONNECTRIX connectors and custom engraving. The diagram below is one example of how ACE produces custom panels for engraving SWITCHCRAFT PANEL ENGRAVING EXAMPLE Custom Switchcraft #PSW-106 panel with custom Switchcraft connectors and custom engraving. The diagram below is one example of how ACE produces custom panels for engraving PANEL MODEL NUMBER: CONNECTOR MODEL NUMBER #C (POSITION #1) #C (POSITION #2) #C (POSITION #3) #C (POSITION #4) #C (POSITIONS #5 & #6) #C (POSITIONS #5 & #6) #PNL-106 ENGRAVED TEXT ON/OFF MIC NET AUDIO VIDEO PROJECTOR VIDEO PROJECTOR PANEL MODEL NUMBER: #PSW-106 CONNECTOR MODEL NUMBER ENGRAVED TEXT #C (POSITION #1) MIC 5 #C (POSITION #2) MIC 6 #C (POSITION #3) MIC 7 #C (POSITION #4) MIC 8 #C (POSITION #5) MIC 9 #C (POSITION #6) MIC ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
19 CUSTOM PANEL MATERIALS & SPECS CUSTOM PANEL MATERIALS AND SPECIFICATIONS CUSTOM PANEL MATERIALS AND SPECIFICATIONS Made to order Custom Panels may be created from Aluminum, Acrylic, and Plastic Laminate materials. Custom Panels are available in sizes up to 24 W x 36 L with multi-panel ganged machined operations providing scaled economies and the lowest panel cost. ACE can provide a complete professional finished panel resource for all your custom panel design installation needs. Call the Ace Custom Order Desk at for more detailed panel information and specifications or custom@acebackstage.com. ALUMINUM ALLOY SHEET Aluminum alloy sheet stock can be cut, black powder coated and engraved for almost any panel requirement. This alloy (6061-T6) is very ridged and flat and stocked in 1/16 and 1/8 thickness. Smaller panels are typically made from 1/16 aluminum. Larger panels (e.g. rack panels) are cut from 1/8 aluminum. Other thickness are available on a custom order basis. Currently the CONNECTRIX system pocket panels, rack panels, and wall panels are fabricated from this tough aluminum alloy. ACRYLIC SHEET Acrylic sheet stock is an excellent panel material. At 3/16 thick it is very flat and ridged, ideal for mounting large multi-pin connectors that require a heavy push/pull for engagement. It provides electrical isolation for connectors with grounded shells typical of many audio and video applications. CNC ROTARY PANEL ENGAVING & ROUTING MACHINES Ace Backstage Co., Inc. s CNC Rotary Panel Routing and Engraving machines produce custom cut panels from a number of different materials, including aluminum, acrylic, and plastic laminate sheets. The router (foreground) can machine custom panels from 1/16 and 1/8 thick aluminum. Because ACE s Panels are CNC Rotary machined and not punched they stay flat and remain undistorted unlike punched panels which distort in the punching process. ACE s CNC Rotary Panel Engraving machine can engrave on aluminum, acrylic, and plastic laminate sheets. Backfill characters are optional and extra using enamel or acrylic paint. ACRYLIC & PLASTIC LAMINATE OVERLAY PANEL EXAMPLE This acrylic has a glossy black finish which is easily engraved and back filled with white acrylic paint for an upscale, hi-tech appearance. Alternately, use the acrylic panel as a sub-panel and engrave a plastic laminant over lay panel for nomenclature call outs. PLASTIC LAMINANT SHEET Plastic Laminant sheet stock is used for engraved over lay panel. This material is 1/16 thick and provides an opaque engraveable laminated surface over a contrasting sub-surface (e.g. black over white). For example, when using a standard high density cutout panel, ( CONNECTRIX Panel #PNL-1425, see page 9) where some cutouts are not populated, an over lay panel can be cut and engraved showing only the positions used and covering unused positions. Many colors and combinations of front and reverse engraveable stock are available on request. Other uses include signs, operating instructions, block diagrams etc. for a permanent professional presentation on any project. A B C In this custom example the Plastic Laminate Overlay Panel (A) is routed and engraved to match the Acrylic Sub Panel (B) which is loaded with custom audio, data, electrical, and video connectors. The Acrylic Sub Panel provides electrical isolation for connectors with grounded shells. The 2 panels are then combined (C) and are ready for installation, wiring, and/or device termination. ALUMINUM MATERIAL SPECS MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied, oven-cured, black semi-gloss powder coat FABRICATION: CNC Rotary Machined, Engraved ACRYLIC MATERIAL SPECS MATERIAL: Acrylic Sheet,.1875 (3/16 ) Thick FINISH: Black high-gloss finish FABRICATION: CNC Rotary Machined & Engraved PLASTIC LAMINATE MATERIAL SPECS MATERIAL: Plastic Laminate Sheet,.062 (1/16 ) Thick FINISH: Opaque laminated surface over contrasting subsurface FABRICATION: CNC Rotary Machined & Engraved ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 19
20 CUSTOM SPEC SERVICES CUSTOM SPEC PANEL & POCKET FABRICATION SERVICES CUSTOM SPEC PANEL FABRICATION AND ENGRAVING FACILITIES Your panel will be made to the exact agreed specification and delivered on time. Panels are precision cut and engraved to your exact specifications from a variety of materials on precision CNC rotary cutting machines. Computer Assisted Drafting (CAD) systems feed data to the machines that define your panel cuts accurate ±.001. Panels and parts with identical material requirements are ganged together into a single production run. Aluminum, acrylic, and plastic laminate material panels are completely cut and engraved in a single set-up and production run for the fastest turn around time possible. The Aluminum panels, after cutting, are prepared for powder coating and thereafter sent to the engraving router. Lead times are generally much shorter for acrylic and plastic laminate because they are completed in a single fabrication event, and no further surface finishing is required. Aluminum requires additional time to powder coat and engrave. Cut, engraved, back filled and painted panel blanks are sent to the assembly bench and populated with the specified connectors, switches, devices, etc. The final completed panel is carefully inspected and checked twice before packaging for shipment. CUSTOM SPEC POCKET FABRICATION FACILITIES Services available from Ace Backstage Co., Inc. include Custom Spec Pocket Fabrication. In addition to our Standard and Super Pockets, ACE can develop custom pockets by utilizing our library of standard components and pocket bodies to design and create pockets that will fit your specific application. Or you can have ACE create a custom pocket from the ground up to meet your specified requirements. From conceptual planning to creation, Ace can build you a custom pocket that will meet all your design expectations. Call the ACE CUSTOM DESK at for more detailed information or us at custom@acebackstage.com for custom quotes and questions. CUSTOM KEYED LOCKING LIDS Three different types of locking lids with keyed locks are available for ACE Standard and Super Stage Pockets (see below) Note: No Carpet Lids or Locking Lids for Mini Pockets. A) Lock (S): Standard Flat Head Screw-driver Lock (key not included) B) Lock (H): Standard 5/32 Allen Key Wrench (key included) C) Lock (K): Tubular Butterfly Key Lock (key included) CUSTOM SPEC SIZED LIDS Lids can be designed to fit your application. For example, a lid with the length of a Super Double Wide Pocket but half the width was developed for a stair/step riser. Custom Lids are designed for Ace Pockets only. Call for more info on your custom Ace Stage Pocket Lids. CUSTOM SLOT CLOSURE LIDS Standard and Super Pocket cable way slots may be modified to meet your specified measurements. Cable way slot closures may be reduced or enlarged to create a custom designed pocket lid with an extra large or small slot closure. Custom slot closure lids apply to Standard Lids only. CUSTOM SPEC PANEL FABRICATION EXAMPLES #PNL-106 #PNL-1212 #PNL-140 #WP-210 #WP-300 #CUSTOM CUSTOM SPEC POCKET FABRICATION EXAMPLE A B C D E F A) Custom Acrylic and Plastic Laminate panel with connectors // B) Custom Double Wide and Double Deep Horizontal Panel Pocket // C) Double Wide Double Deep Pocket with Panel installed D) Double Wide Trim Bezel Lid assembly with attached slot closures // E) Complete custom Double Wide Double Deep Pocket fully assembled with lid open and lid closed (F) 20 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
21 CHOIR STICK MICROPHONES CHOIR STICK MICROPHONES CHOIR STICK MICROPHONES AUDIO-TECHNICA SERIES #CSM-40 and #CSM-60 and SHURE SERIES #CSM-41 and #CSM-61 The CSM-40, CSM-41, CSM-60, and CSM-61 Series Choir Stick Microphones offer the ultimate performance of an overhead hanging choir mic in a totally portable configuration. The low profile, light weight, black, aluminum, space age alloy Stick mic is available in both 40 and 60 models. The Boom Stick places the microphone element ideally above and over any choir. This versatile Stick microphone mounts on any standard microphone stand with any standard taper-body mic stand clip. It is extremely stable and will not easily tip over. Three (3) Shure pick-up patterns and five (5) Audio-Technica pick-up pattern choices mean one will be right for your needs. Use the Choir Stick Microphones for children or adult groups on the stage steps, portable risers or anywhere. The CSM-40 (40 long) and CSM-60 (60 long) Choir Stick Microphone features Audio-Technica s miniature back-plate condenser elements while the CSM-41 (40 long) and CSM-61 (60 long) Choir Stick Microphone features Shure s miniature electret condenser elements. The elements are then assembled into an ultra light weight aluminum boom shaft (.312 Dia.) for long reach, high performance microphone applications. Each Stick microphone version is supplied with a Taper-Body Clutch Stand Mount and a U-U Clip ready for use with any standard microphone stand. The Audio-Technica CSM Mic is a wide range condenser microphone while the Shure CSM Mic is a miniature electret condenser microphone. Both series of Stick Mics are available with a variety of interchangeable cartridges/elements. All Choir Stick Mics are designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup situations. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well contoured appearance. The Ouptput Connection Power Module for the Audio-Technica Stick microphone is an Integral 3-pin XLRM-type, phased with Phantom Power Requirements of 9-52V dc, 2.0mA typical and an Output Impeadance EIA rated at 200 ohms. The Output Connection Power Module for the Shure Stick microphone is an Integral 3- pin XLRM-type, phased with Phantom Power Requirements of 11-52V dc, 2.0mA typical and an Output Impeadance EIA rated at 200 ohms. Clutch Stand Mount Audio-Technica Element #CSM-60 Choir Stick Microphone Choir Stick Mics are nearly invisible during a performance. Even during setup the Choir Mics can barely be seen (left). CHOIR STICK MICROPHONES INCLUDE U-U Clip The Choir Stick Microphone is supplied with a Phantom Power Module, a U-U Power Module Clip, and a Taper Body Clutch Stand Mount. The Stick Mic also requires 9-52v of Phantom Power and Does Not include the stand. TAPER BODY CLUTCH STAND MOUNT The simple design of the Taper Body Clutch Stand Mount makes it easy to use on almost any standard microphone stand. The compact size creates a sleek look while maintaining a stable foundation. U-U CLIP The U-U Power Module Clip captures the power module against the mic stand for easy connection with mating cable. Made with state of the art molded plastic, this clip is strong and durable. Available in black. Shure Element CSM ELEMENTS - AUDIO-TECHNICA The flexible design of the Audio-Technica gooseneck allows greater maneuverability of the condenser while maintaining a sleek, compact appearance. Extra Audio-Technica elements (Cardioid, Hypercardioid, and MicroLine) optional. The MicroLine element designed by Audio-Technica has a flexible gooseneck and extra long microphone yielding a tighter pattern and longer reach. CSM ELEMENTS - SHURE The flexible design of the SHURE Micro-flex MX202 elements allow greater maneuverability of the condenser while maintaining a sleek, compact appearance. Extra SHURE elements (Cardioid and Supercardioid) are optional. MODEL NUMBER MOUNT TYPE AUDIO-TECHNICA and SHURE CHOIR STICK MICROPHONE SPECIFICATIONS POLAR PATTERN ELEMENT TYPE FREQUENCY RESPONSE OPEN CIRCUIT SENSITIVITY 1 MAX INPUT SOUND LEVEL 2 DYNAMIC RANGE 3 #CSM40C Stick Mic Cardioid fixed charge back plate polarized condenser Hz -42dB (7.9mV) 142 db SPL 115 db 67 db #CSM40H Stick Mic HyperCardioid fixed charge back plate polarized condenser Hz -42dB (7.9mV) 142 db SPL 115 db 67 db #CSM40ML Stick Mic Microline fixed charge back plate polarized condenser Hz -35dB (17.7mV) 135 db SPL 109 db 68 db #CSM41C Stick Mic Cardioid Hz -53.5dB (2.11mV) 123 db SPL 94 db 65 db #CSM41SC Stick Mic SuperCardioid Hz -52.5dB (2.37mV) 122 db SPL 94 db 66 db #CSM60C Stick Mic Cardioid fixed charge back plate polarized condenser Hz -42dB (7.9mV) 142 db SPL 115 db 67 db #CSM60H Stick Mic HyperCardioid fixed charge back plate polarized condenser Hz -42dB (7.9mV) 142 db SPL 115 db 67 db #CSM60ML Stick Mic Microline fixed charge back plate polarized condenser Hz -35dB (17.7mV) 135 db SPL 109 db 68 db #CSM61C Stick Mic Cardioid Hz -53dB (2.11mV) 122 db SPL 94 db 65 db #CSM61SC Stick Mic SuperCardioid Hz -52dB (2.37mV) 122 db SPL 94 db 66 db Audio-Technica: 1 re 1V at 1 Pa = 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db 2 1 khz at 1% T.H.D 3 1 khz at Max SPL 4 1 khz at 1 Pa - Typical A-weighted using System 1 Shure: 1 at 1 khz, reference 1/V microbar = 1 microbar = 74 db SPL 2 1 khz at 1% T.H.D, 1 k ohm load 3 at 1 k ohm load 4 referenced at 94 db SPL SIGNAL TO NOISE RATIO 4 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 21
22 MIC SOFTPOD & MIC HANGER SLUG MICROPHONE SOFTPOD MICROPHONE SOFTPOD (#SOFTPOD) The Microphone Softpod (B) is another great idea put into action by Ace Backstage Co., Inc. This simple yet sturdy device was designed to thread on any standard microphone stand and hold up to 6 standard ball-type microphones securely. The Microphone Softpod is easy to use and lightweight, which makes it portable and efficient. The Soft foam illustrated in image (A) isolates and cushions microphones from each other and minimizes noise when placing or removing microphones. Sturdy black metal base threads directly onto any standard microphone stand. The Microphone Softpod s small footprint (C) and light weight design make it great for small locations and portable systems. The Microphone Softpod holds up to (6) standard ball type microphones securely and mounts on most standard microphone stands (D). (B) Mic Softpod on Stand with Mics (C) Mic Softpod Noise Isolating Foam 7 8 (D) Mic Softpod Closeup (A) Mic Softpod Noise Isolating Foam MICROPHONE HANGER SLUG MICROPHONE HANGER SLUG FEATURES Overhead microphone applications over choirs, orchestras, audiences etc... Flexibility means it will work for both permanent or temporary settings Quick and easy set-up and take-down of hanging microphones Positive indexing side-to-side (yaw) and up and down (pitch) Machined aluminum w/ a standard 5/8-27 threaded end and a black anodized finish A) A standard cable tie clamps the micro phone cable in place and keeps it from twisting and moving B) The groove helps to eliminate cable movement by maintaining the cable tie in place C) The Microphone Hanger Slug is made from aluminum with a black anodized non-reflective finish ACE #42 Microphone Hanger Slug MICROPHONE HANGER SLUG The ACE #42 Microphone Hanger Slug allows you to hang almost any microphone from a cable end and point it in any direction. The Microphone Hanger Slug permits a standard microphone stand mount clip to be attached near the end of a hanging cable and the microphone to be clipped in place. The cable is clamped to the slug with a cable tie allowing the cable above to come to a normal relaxed position. This permits the adjustment of the microphone side-to-side movements (yaw) by turning the microphone clip on the slug without twisting the cable above the slug... the microphone will stay exactly where it is pointed. The up-down movements (pitch) is accomplished by pivoting the microphone up or down at the clip pivot. The Microphone Hanger Slug is a handy, quick-fix item for sound reinforcement, recording, production, or broadcast engagements. The simple design of the ACE #42 Microphone Hanger Slug makes it easy to install, use and break down. The Slug screws into many microphone stand mount clips and can even be left in the clip by simply disconnecting the microphone cable from the mic. This allows the user to keep his original location/ direction of the microphone without the hassle of maneuvering it into position again. 22 ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web:
23 RACK MOUNT KITS & WALL BOXES RACK MOUNT EARS & SHELF KITS MACKIE MIXER RACK MOUNT EARS Rack Mount Ears designed specifically for MACKIE mixers. The rack mount ears are manufactured using 16 gauge steel. These rack mount ears will work on a variety of Mackie mixers, including the following model series: #1202-VLZ3, #1402-VLZ3, and #1642-VLZ3. MACKIE MIXER RACK MOUNT EARS INSTALL MACKIE Rack Mount Ear Kits attach to the mixer using (4) existing chassi screws found at the corners of the mixer. The rack mount ears when properly installed permit the mixer to mount into standard EIA rack rails. Follow the steps listed below for compete installation. RACK MOUNT EARS AND SHELF KITS Ace Backstage Co. Inc. s Rack Mount Ears and Shelf Kits are made up of left and right rack mount ears and at shelf pan. The left/right rack ears are fabricated from 16 ga. steel and precision punched to matchup with various tape and CD decks and are finished with a black powder coat. The pan is also 16 ga. steel and is finished with the same heat set black powder coat finish as the rack mount ears. The pan lip may be assembled at the front or rear and in the up or down position for rigid support where needed. This kit provides a positive solid attachment of the deck to standard EIA rack rails. Both 2-space and 3-space kits are available. Assembly screws and self-locking nut-washers are included. Rack Mount Ears & Shelf Kit #ABC-RS2U Rack Mount Ears & Shelf Kit #ABC-RS3U 1) Disconnect the A.C. power from the mixer 2) Remove screws at each corner that match the mounting holes provided in the rack mount ears CAUTION: DO NOT REMOVE ANY OTHER SCREWS 3) Align the rack mount ears on each side of the mixer to match up with the screw holes 4) Attach the rack mount ears with the screws removed in Step 2 CAUTION: DO NOT OVERTIGHTEN SCREWS #RE-1202 Rack Mount Ears #ABC-RS2U RACK MOUNT EARS AND SHELF KIT WITH 2 SPACE RACK EARS #ABC-RS2U Rack Kit Includes: A) 1 Shelf Pan B) 1 Pair of 2 Space Rack Ears C) Screws w/ Self-Locking Nut-washers Mounts in standard EIA 19 rack with an open front space up to 17-3/16 wide and an 11 front to back depth. #ABC-RS3U RACK MOUNT EARS AND SHELF KIT WITH 3 SPACE RACK EARS #ABC-RS3U Rack Kit Includes: A) 1 Shelf Pan B) 1 Pair of 3 Space Rack Ears C) Screws w/ Self-Locking Nut-washers Mounts in standard EIA 19 rack with an open front space up to 17-3/16 wide and an 11 front to back depth. WALL BOXES #RE-1402 Rack Mount Ears STOCK STEEL WALL BOXES Wall Boxes made from.074 (1/16 ) thick steel and finished with a gray, heat-set enamel. Standard Electrical Conduit combination knock-outs located on all 4 sides. Note: Wall Boxes DO NOT accommodate ACE CONNECTRIX Wall Panels. Custom wall panels are available. Wall Box #WB8x8x4 Wall Box #WB10x10x4 Wall Box #WB12x12x4 #RE-1642 Rack Mount Ears ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA Tel: Fax: Web: 23
24 ACE BACKSTAGE CO. PUSH PUSH CLEAR COM DMX12 ACE BACKSTAGE CO., INC. STAGE POCKET SYSTEMS Avenue Rockefeller Suite 200 Valencia, CA Issue: #068 Tel: Fax: Web: STAGE POCKET SYSTEMS See Pages 5-8 #123SLBK #025BK #124SLBK CONNECTRIX CONNECTORS See Pages #C #C #C CONNECTRIX PANELS See Pages 9-11 #PNL-106 #RPL-345 #PNL-1425 STAGE PRODUCTS See Pages #42 MIC HANGER SLUG #SOFTPOD #CSM60C CHOIR MIC NOW AVAILABLE! Download DWG & DXF AutoCAD Specs at ACE BACKSTAGE CO., INC Avenue Rockefeller Suite 200 Valencia, CA CHANGE SERVICE REQUESTED PRESORTED STANDARD U.S. POSTAGE PAID MARKETSHARE VAN NUYS, CA CONNECTIVITY TO: CONNECTRIX SYSTEM SEE PAGE 9
ACE BACKSTAGE CO., INC.
PUSH PUSH ACE BACKSTAGE CO. CLEAR COM DMX12 ACE BACKSTAGE CO., INC. STAGE POCKET SYSTEMS Stage Pocket Systems / Panel Fabrication / Spec Fabrication / Stage Management Products COMPARE 122SLBK Full Stage
More information24846 Avenue Rockefeller Suite 200 Valencia, CA Issue: SPC Tel: Fax: Web:
CE BCKSTGE CO., INC. STGE POCKET SYSTEMS P NE LF B ION ST GE P ET S Y S S M E T T C RI OC K 24846 venue Rockefeller Suite 200 Valencia, C 91355 Issue: SPC Tel: 661-295-5760 Fax: 661-295-1122 Web: www.acebackstage.com
More informationMPS-Lite. A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them.
MPS-Lite A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them. A size panel (0.90 x 3.50 ) + more B Size panels (1.80 x 3.50
More informationNew products spring 2018
New products spring 2018 MODULAR SOLUTIONS CASY SERIES DESKTOP CHASSIS Front module mounting Large access holes on rear Structured black powder coating (RAL9004) Aluminum extruded frame with plastic sides
More informationHaworth Power Technical Sheets January 2018
Haworth Power Technical Sheets January 2018 Includes Accessories This page intentionally left blank. Table of Contents Desk Top Port Power Tap Cord Power Tap Conduit Enchanced Power Module Flip Top Unit
More informationU-SERIES SPECIFICATION GUIDE
U-SERIES SPECIFICATION GUIDE Connectivity with flexibility For more product information visit connectrac.com, call us at 877-480 - 5637 or email us at info@connectrac.com ADA COMPLIANT - U.L. TESTED AND
More informationElectrak quick fit floor service outlet boxes
www.electrak.co.uk 12 Electrak quick fit floor service outlet boxes Tel: 01207 503400 Fax: 01207 501799 Email: sales@electrak.co.uk Because of our policy of continuous improvement, Electrak reserves the
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More information68-HP Floor Box. Universal 3-Gang Design Provides Superior Capacity and Mounting Flexibility
68-HP Floor Box Universal 3-Gang Design Provides Superior Capacity and Mounting Flexibility Innovative 3-Gang Round Floor Box for Power, Data and AV Combines the Capacity of a 3-gang box with the Affordability
More informationIRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
More informationKM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
More informationSmart Products. Ingenious Solutions.
THE FUTURE IS ON Smart Products. Ingenious Solutions. Wiring Devices, Energy Management Solutions and Commercial Data Infrastructure Products L-200 Wallplates and Weather-Resistant Covers INDEX Decora
More informationTelephone Accessories
Telephone Leviton s selection of telephone accessories features a wide variety of wallplates, jacks, adapters and couplers, and extension cords. 88 LEVITON.COM CONNECTED P 800.722.2082 HOME Technical Questions?
More informationFEATURES. AlphaBlueLight Emergency Towers Installation & Operations Manual FIGURE 1: FRONT & REAR VIEWS
AlphaBlueLight Emergency Towers Installation & Operations Manual FIGURE 1: FRONT & REAR VIEWS FEATURES ADA Compliant (hands free operation) LED call status indicator Powder coated steel construction inside
More informationALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
More informationDOCKING STATION SPECIFICATIONS
ONE PERSON STATION Power Outlets Data Jack Plate Mouse Brackets Front Covers Cable Holes Cable Holes Overview: The Docking Station distributes power, data, and laptop storage to each user. It also offers
More informationEMC Shielding Clear plated components (exterior painted) and a conductive fabric-over-foam gasket provide an HF2 level of shielding.
Spec-00418 E763.422.2211 763.422.2600 PROLINE External Components PROLINE Doors, Covers and Sides PROLINE External Components PROLINE Doors, Covers and Sides Door Gasketing, Shielding and Door Bars Overview
More informationCI/SfB 62 (x) Publication No Quick Fit Floor Service Outlet Boxes & Grommets
CI/SfB 62 (x) Publication No. 010702 Quick Fit Floor Service Outlet Boxes & Grommets Quick fit 2, 3 and 4 compartment floor service outlet boxes Electrak has produced the Quick Fit Floor Service Outlet
More informationEMC Shielding Clear plated components (exterior painted) and a conductive fabric-over-foam gasket provide an HF2 level of shielding.
763.422.2600 Spec-00418 I763.422.2211 PROLINE External Components PROLINE Doors, Covers and Sides PROLINE External Components PROLINE Doors, Covers and Sides Door Gasketing, Shielding and Door Bars Overview
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More informationReference Manual VL-ENCL-5. Development Enclosure DOC. REV. 4/9/2013
Reference Manual DOC. REV. 4/9/2013 VL-ENCL-5 Development Enclosure WWW.VERSALOGIC.COM 12100 SW Tualatin Road Tualatin, OR 97062-7341 (503) 747-2261 Fax (971) 224-4708 Contents Copyright 2013 All Rights
More informationNational Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia
National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More information1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
More informationnls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationPHYSICAL INFRASTRUCTURE QUICK SKU FINDER
PHYSICAL INFRASTRUCTURE QUICK FINDER Simplified Connectivity Simplified Connectivity combines our technical support services, products, and industry leading customer advocacy to create a comprehensive
More informationGround Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /
2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationFree-Standing Type 12 Enclosures
Type 12 Enclosures Application Designed to protect electrical and electronic controls, components, and instruments in typical industrial environments. The UL Type 12 rating protects enclosed equipment
More informationAl uminum Raceway is sleek, clean and
Architectural Aluminum Raceway AL5200 Aluminum Raceway Al uminum Raceway is sleek, clean and attractive. Integrated into casework or lab furniture or installed as baseboard, these raceways distribute communication
More informationA Complete Floor Box System for Concrete
A Complete Floor Box System for Concrete Leviton has it all. From the floor box itself to the devices inside, our system delivers superior electrical power, AV and networking solutions. Delivering The
More informationRavenna TM. Fixture Options: Ordered Separately from Fixture See page 2. Mounting Options: Ordered Separately from Fixture See pages 3-5
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners,
More informationAluminum Mailboxes - Standard System
Aluminum Mailboxes - Standard System continued on pages 36-39 2200 SERIES STANDARD SYSTEM DOOR SIZES 3-1/2'' #1 #2 #3 STANDARD SYSTEM REAR LOADING Salsbury 2200 series standard system aluminum mailboxes
More informationThis Wiremold aluminum raceway system meets the
Architectural Aluminum Raceway AL3300 Aluminum Raceway This Wiremold aluminum raceway system meets the demands of today's commercial spaces, providing a compact, handsome and effective method of consolidating
More informationShelves, Keyboard Trays and Gland Plates Folding Shelves
763.422.2600 SPEC-00035 Q763.422.2211 ACCESSORIES SHELVES, KEYBOARD TRAYS AND GLAND PLATES FOLDING SHELVES Shelves, Keyboard Trays and Gland Plates Folding Shelves STAINLESS STEEL FOLDING SHELF Size AxB
More information4C Standard Horizontal Mailboxes
4C Standard Horizontal Mailboxes Note: 3700 series 4C standard horizontal mailboxes and parcel lockers have been U.S.P. S. approved and meet the specifications of USPS-STD-4C. These units are required
More informationUNDERCARPET CABLING SYSTEM For Power and Communications
UNDERCARPET CABLING SYSTEM For Power and Communications Linking Everything Together Power, Voice, and Data December 5, 2007 Undercarpet Cabling System Overview What is Undercarpet Cabling? Primary Applications
More informationThe 400, 800, and 2300 Series, from
400, 800, 2300, 2300D Surface Nonmetallic Raceway Systems For Low Voltage and Power pplications 400, 800, 2300, 2300D Series Raceway Systems The 400, 800, and 2300 Series, from The Wiremold Company, is
More informationThe 5500 Series from The Wiremold Company
5500 Nonmetallic Raceway Multi-Channel Surface Nonmetallic Raceway Available Factory Prewired. The 5500 Series from The Wiremold Company provides wire and cable management for data, voice, video, and power
More informationShelving. Power Track Light Shelves 2 Shelf Edge 4 Shelf Standards & Brackets 5 Flexis DisplayMaker Shelving 8
Shelving Stylmark s shelving products have clean lines that provide an attractive accent to any area. Constructed of aluminum or stainless steel, these elegant framed shelves are available with or without
More informationSM (SURFACE MOUNTED) WIREWAY: I SERIES
SM (SURFACE MOUNTED) WIREWAY: I SERIES DUPLEX POWER AND AV / TELECOM ANYWHERE The new Connectrac SM (Surface Mounted) Wireway installs directly onto any type of flooring. It s the industry s newest alternative
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationAluminum Mailboxes Standard System
Aluminum Mailboxes Standard System 2200 SERIES STANDARD SYSTEM DOOR SIZES 3-1/2'' continued on pages 44-47 #1 #2 #3 STANDARD SYSTEM #4 Salsbury 2200 series standard system aluminum mailboxes have 1/4''
More information4C Std Horizontal Mailboxes - cont. on pgs 14-19
4C Std Horizontal Mailboxes - cont. on pgs 14-19 4C STANDARD HORIZONTAL MAILBOXES FRONT OR REAR LOADING #3716D-20 maximum height 4C standard horizontal mailboxes in aluminum finish with custom engraved
More informationTitan Cable Management Catalog TCM3.0. IMS Engineered Products is ISO 9001 Certified. Designed and Manufactured in the USA
TCM3.0 IMS Engineered Products is ISO 9001 Certified Designed and Manufactured in the USA Titan Cable Management Catalog an IMS Engineered Products Brand TCM Overview About TCM IT hardware in today s data
More informationSection A5. Standard Telephone Entry Systems. This Price Schedule is effective April 1, Date Page Comment
April 2015 PRICE SCHEDULE A 2.0 Section A5 This Price Schedule is effective April 1, 2015. Date Page Comment 4-1-15 All April, 2015 Price Schedule update. Prices and specifications subject to change without
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationEMC Shielding Clear plated components (exterior painted) and a conductive fabric-over-foam gasket provide an HF2 level of shielding.
763.422.2600 Spec-00418 H763.422.2211 PROLINE External Components PROLINE Doors, Covers and Sides PROLINE External Components PROLINE Doors, Covers and Sides Door Gasketing, Shielding and Door Bars Overview
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationVertiv VR Rack 1.0 GENERAL
1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic
More informationRCM & RCM+ enhancement
Data Comm DCRCM-15R RCM & RCM+ enhancement increasing network rack density Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability and make
More informationTechnical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
More informationFeatured Products - RU Marking Standard on Hoffman brand
: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair
More informationPAR+ & MSC+ Controller. Installation Manual
PAR+ & MSC+ Controller Installation Manual Contents Introduction... 1 System Configuration...1 Parts List and Tools Required for Installation...1 Installation Checklist...1 Mount Controller Pedestal on
More informationSensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
More informationPower-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate and Cooling Fan. Model: NB F. Applications and Features
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Mounting Plate and Cooling Fan Model: NB141207-40F Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power-Over-
More information151 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
151 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed to work in a wide range of environments indoors or outdoors, and house electronic controls, instruments,
More informationTYPE 4/12 PREMIER SERIES
Type 4 / 12 Enclosures TYPE 4/12 PREMIER SERIES ENCLO- Contemporary Contemporary Design Design Seamless Seamless Foam-In-Place Foam-In-Place Gasketing Gasketing Utility Utility Brackets Brackets for for
More informationF E A T U R E S & B E N E F I T S
Wiremold Floor Boxes Large Capacity Floor Boxes for Power, Communication & A/V Applications Protection from water, dirt, and debris. Resource RFB Series RFB9/11 Floor Boxes are excellent solutions for
More informationRH-8 Headphone Station. Installation Guide
RH-8 Headphone Station Installation Guide 2 RH-8 Installation Guide Contents Safety Information...4 Introduction...4 What s in the Box... 5 Top view... 6 Base view... 7 Installation...8 Connections...
More informationSERVICE MANUAL MODEL WPP-331-D WEATHERPROOF TELEPHONE MODEL HOB-331-D WEATHER RESISTANT TELEPHONE. and MODEL SSP-311-D STAINLESS STEEL PANEL TELEPHONE
WPP(HOB)-331-D or SSP-311-D ATD-11 Issue 5.00 SERVICE MANUAL FOR MODEL WPP-331-D WEATHERPROOF TELEPHONE MODEL HOB-331-D WEATHER RESISTANT TELEPHONE and MODEL SSP-311-D STAINLESS STEEL PANEL TELEPHONE EQUIPPED
More informationCom-Tray. Under Floor. Labor-saving assembly Field proven and tested Superior construction Shipped ready to assemble
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationPower Base AI. Power Base AI. Technical Sheets
Power Base AI Power Base AI Technical Sheets odular Electrical System System Overview Haworth s Power Base AI modular electrical system provides a flexible, reconfigurable power distribution infrastructure
More informationRESIDENTIAL PRODUCTS Residential Products
2012 PRODUCT CATALOG Residential Products 8.1 MSDE Enclosures... 260 8.2 Modules... 262 8.3 Economy Distribution Solutions... 265 8.4 Residential Diagram... 266 As technological advances creep from the
More informationCableSmart Series Nonmetallic Raceway
CableSmart Series Nonmetallic Raceway Dual-Channel 40N2 Series Nonmetallic Raceway System FIBER OPTIC CAT5 Wiremold CableSmart 40N2 Series Raceway is a large capacity nonmetallic raceway system that offers
More informationCONCEPT Stainless Steel Wall-Mount Enclosures
CONCEPT Stainless Steel Wall-Mount Finish are unpainted. Door and body have smooth #4 brushed finish. Optional CONCEPT panels are white painted or zinc-plated. Optional NEMA panels are white painted, zinc-plated,
More informationPower-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate. Model: NB Applications and Features
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Mounting Plate Model: NB141207-400 Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power- Over-Ethernet Indoor
More informationThis attractive raceway conceals and
Access 5000 Nonmetallic Surface Raceway System 5000 Two-Piece Multiple Channel Raceway This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
More informationThe 5400 Series Raceway from The Wiremold
5400 Nonmetallic Raceway Nonmetallic Raceway with Twin Snap Cover System Available Factory Prewired The 5400 Series Raceway from The Wiremold Company provides wire and cable management for data, voice,
More informationWIREMOLD. innovative wire and cable management
WIREMOLD innovative wire and cable management MORE WIREMOLD FROM C2G! Check out our expanded offering of Wiremold Cable Management Products C2G s newly expanded Wiremold Cable Management line now includes
More informationRACKS AND CABLE MANAGEMENT
F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended
More informationALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationINTERNATIONAL MODULAR WIRING DEVICES
INTERNATIONAL MODULAR WIRING DEVICES International Configurations Inc s product range of Country specific modular wiring devices are designed for Worldwide construction projects, data centers, medical
More informationType 4X S.S. Disconnect Enclosures
201 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 4X S.S.Disconnect Enclosures are designed to work in a wide range of environments indoors or outdoors, and house
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationFree-Stand Universal-Cutout Disconnects Free-Stand Type 12 Disconnects
763.422.2600 SPEC-00250 N763.422.2211 DISCONNECT FREE-STAND UNIVERSAL-CUTOUT DISCONNECTS FREE-STAND TYPE 12 DISCONNECTS Free-Stand Universal-Cutout Disconnects Free-Stand Type 12 Disconnects TWO-DOOR WITH
More information5cÜÉ fxü xá5véçáéäx TvvxááÉÜ xá API 1608
eautifully appointed accessories designed specifically to blend seamlessly with the PI 1608 onsoles. In appearance and function, these add-on components will provide you with all of the tools and conveniences
More informationIndustrial Monitors and Touch Monitors
Industrial Monitors and Touch Monitors LCD Monitor Specifications Heavy Light Part Numbers -TS Price Screen Specifications (Active Matrix) Display Type TFT
More informationCHOGORI USA. CAC3 POWER SUPPLY Connector USER-FRIENDLY PERFORMANCE ENGINEERED CONFIGURABLE STANDARD CIRCUIT CONFIGURATIONS
CHOGORI USA CAC3 POWER SUPPLY Connector USER-FRIENDLY PERFORMANCE ENGINEERED CONFIGURABLE Fast and convenient twist locking system. Ergonomic latch design provides easy operation. Safe,Electric shock resistant.
More informationThis attractive raceway conceals and
5000 Two-Piece Multiple Channel Raceway Access 5000 Nonmetallic Surface Raceway System This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
More informationElectrical Accessories 1st June, 2016
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationAL4400 Series Isoduct Aluminum Raceway
AL4400 Series Isoduct Aluminum Raceway Aesthetic Dual-Channel Raceway Available Factory Prewired. COMMUNICATIONS SURGE PREWIRED Wiremold AL4400 Series Raceway is a two-channel, single-cover, cost effective
More informationBasketball Shot Clock Set LX2180 Manual
Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents
More informationPRELIMINARY. CR Series. Ceiling Rack Systems with AmbiTILT Equipment Loading
1/6 CR Series Ceiling Rack Systems with AmbiTILT Equipment Loading General Description AtlasIED, the manufacturing leader of ceiling mounted loudspeakers introduces the new CR Series ceiling-mounted equipment
More information2.7 UNDER-CARPET WIREWAY
2.7 UNDER-CARPET WIREWAY U.S. List Pricing SO SUBTLE IT VIRTUALLY DISAPPEARS Connectrac 2.7 Under-Carpet Wireways. Completely concealed by carpet tile, they are Connectrac s lowest, sleekest, most invisible
More informationWith its tamper-resistant design, the
Dual-Channel 40N2 Series Nonmetallic Raceway Systems CableSmart Series Nonmetallic Raceway With its tamper-resistant design, the CableSmart 40N2 Series Raceway is ideal for schools or office settings,
More informationStandard Configuration - 4) 15 amp power receptacles 1) Cutout for configurable telecom plates. Door Finishes - UL Listed
power modules P-1 conference table power info List Price - PM-P-1-B - $415 Black Laminate Tech Doors PM-P-1-A - $665 Brushed Tech Doors PM-P-1-SS - $685 Solid Surface Tech Doors P-1 Power Module Power
More informationThis attractive raceway conceals and
Access 5000 Nonmetallic Surface Raceway System 5000 Two-Piece Multiple Channel Raceway This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
More informationDecorative Flat Plate Electrical Accessories in Various Plate Finishes Issue 5
Decorative Flat Plate Electrical Accessories in Various Plate Finishes Issue 5 Switches Sockets Connection Units Fan Isolation Switches Blank Plates Cooker Control Panels Telephone and Data Outlets Coaxial
More informationPower-Over-Ethernet Weatherproof 18" x 16" x 8" Enclosure with Equipment Mounting Plate and Cooling Fans
Power-Over-Ethernet Weatherproof 18" x 16" x 8" Equipment Mounting Plate and Cooling Fans Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power- Over-Ethernet
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationCopy Machine Reader. Installation and Setup Guide
Copy Machine Reader Installation and Setup Guide CONTENTS 1 COPY MACHINE READER INSTALLATION 1 Overview 1 Reader Specifications 3 CR1120/CR1122 INSTALLATION 3 Copier Interface 3 AC Electrical 3 Communications
More informationRUGGED MILITARY GRADE
R4U-20A RUGGED MILITARY GRADE COTS Plus 4U ENCLOSURE Optimized for High Shock / Vibration Environments C6CHASSIS SYSTEMS ENGINEERED TO PERFORM The R4U-20A is designed to survive! Aircraft grade aluminum
More informationFree-Stand Universal-Cutout Disconnects Type 12 Modular Free-Stand Disconnects and Accessories
763.422.2600 SPEC-00252 N763.422.2211 DISCONNECT FREE-STAND UNIVERSAL-CUTOUT DISCONNECTS TYPE 12 MODULAR FREE-STAND DISCONNECTS AND ACCESSORIES Free-Stand Universal-Cutout Disconnects Type 12 Modular Free-Stand
More information8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135.
Sheet Metal Part No Galv Sheet 800 x 600 x 0.55mm F106765 $11.50 $9.20 10 Galv Sheet 800 x 600 x 0.75mm F106766 $14.70 $11.70 10 Galv Sheet 800 x 600 x 0.95mm F105143 $24.70 $19.80 10 Aluminium Sheet (H34)
More information4C Standard Horizontal Mailboxes - continued on pages 14-17
4C Standard Horizontal Mailboxes - continued on pages 14-17 (2) maximum height 4C standard horizontal mailboxes in finish with custom engraved placards (#3767) displayed 4C STANDARD HORIZONTAL MAILBOXES
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MicroComm DXI. Intent & Scope This document describes the installation procedure for the IMS-30 Intercom Master Station and the MAI-420 or MAI-20 Master Audio Interface. The earliest
More information3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material
More information