HOLDDATA FOR IMS 9.1 PUT Level ** Please read all of the HOLDDATA before acting on any of it. **

Transcription

1 HOLDDATA FOR IMS 9.1 PUT Level 0711 ** Please read all of the HOLDDATA before acting on any of it. ** ************************************************************************ Please pay close attention to the holddata for the following PTFs with action items. UK31042 UK31054 (UK17863) UK31088 Dep this dependency was met on MVS base PUT0705. UK31320 (UK31320,UQ96590) ********** HOLDDATA **************************************************** UK31042 TYPE = PTF DATE/TIME REC = :40:02 PRE VER(001) = UK23783 SUPING VER(001) = DK55455 MOD = HWSSUST0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK31042) SYS FMID(HMK9900) REASON(ACTION) DATE(07312) (++ + Hold for APAR PK User processes that are sensitive to the IMS Connect Recorder trace output should note that the OPB portion of the ICONSN record that records data transmitted to IMS TM Resource Adapter (IMS Connector for Java) clients will begin with the IMS WEB header followed by the OTMA header. The IMS WEB header is the 12 byte header containing the 4 byte LLLL field and the 8 byte *HWSJAV* exit id. The IMS WEB (IWEB) header is and has been part of the data transmitted to the IMS Resource TM Adapter client but previously not recorder in the Recorder Trace.). UK31043 TYPE = PTF DATE/TIME REC = :40:02 SOURCEID = HIPER PUT0711 SMCCOR PRE VER(001) = UK10134 UK13735 UK18860 UK20473 UK23247 UK28321 UK28957 UQ85650 UQ87938 UQ93187 UQ94540 UQ95941 SUPING VER(001) = DK50160 MACUPD = CQSTRSTE MOD = CQSCHK30 CQSFM020 CQSFTRC0 CQSM2ENU CQSSTE20 CQSSTR00 HOLDSYSTEM(INT) = DOC ++ HOLD(UK31043) SYS FMID(HMK9900) REASON(DOC) DATE(07312) (DOCUMENTATION CHANGE FOR APAR PK50160 GC SC In the IMS V9 Messages and Codes Volume 1 manual (GC187827), in Chapter 8 CQS Messages: Add new message CQS0374I: CQS0374I STRUCTURE CHECKPOINT SKIPPED FOR NONRECOVERABLE STRUCTURE structurename

2 Explanation: CQS processing internally triggered a structure checkpoint. However, because the structure involved was a nonrecoverable structure, the structure checkpoint was skipped. CQS internal structure checkpoints are generated after significant structure events such as overflow and rebuild. CQS skips taking internal structure checkpoints for nonrecoverable structures, because these structures cannot be rebuilt from structure checkpoints. This message is issued for diagnostic purposes. In the message text: structurename The name of the primary queue structure whose internal structure checkpoint was skipped. System action: CQS continues processing. System programmer response: None. This is an expected message for nonrecoverable structures when a significant structure event such as overflow or structure rebuild occurs. It is issued for diagnostic purposes only. Module: CQSCHK30 UK31049 TYPE = PTF DATE/TIME REC = :40:02 PRE VER(001) = UK29795 SUPING VER(001) = DK53556 MOD = CSLSRG20 In the IMS V9 Common Queue Server Guide and Reference manual (SC187815), in Chapter 2 CQS Definition and Tailoring, section CQS Global Structure Definition PROCLIB Member (CQSSGxxx), under the "RECOVERABLE=" parameter replace the paragraph that starts "Nonrecoverable structures requre that SRDS data sets..." with this one: o Nonrecoverable structures require that SRDS data sets (SRDSDSN1=, SRDSDSN2=) be specified and allocated. Although they are not used for recovery, clientinitiated structure checkpoints (including the CQSCHKPT macro, the /CQCHKPT IMS command, and CQS normal shutdown checkpoints requested through the IMS /CQSET command) are still allowed. These checkpoints can be useful for diagnostics, as an alternative to taking a memory dump of the structure. CQS internallygenerated structure checkpoints are skipped for nonrecoverable structures.). HOLDSYSTEM(INT) = DOC ++ HOLD(UK31049) SYS FMID(HMK9900) REASON(DOC) DATE(07312) (DOCUMENTATION CHANGE FOR APAR PK53556 SC The following publication updates are made by this APAR: IMS Version 9: Common Service Layer Guide and Reference, SC187816

3 In the chapter on the CSL Structured Call Interface, in the CSL SCI Requests section of the "CSL Structured Call Interface" chapter (add immediately before the explanation of the profile example): Change the description of the JOBSTEP value of the TCB parameter for the CSLSCREG request (in the CSL SCI requests section of the CSL Structured Call Interface chapter) to the following (the second sentence is added): JOBSTEP Associate the SCI connection with the address space jobstep TCB (the TCB pointed to by ASCBXTCB). This is also known as the cross memory resorce owning TCB.). UK31054 TYPE = PTF DATE/TIME REC = :40:03 SOURCEID = HIPER PUT0711 SMCCOR PRE VER(001) = UK03668 UK03678 UK12580 UK13648 UK14550 UK16118 UK17657 UK19395 UK19612 UK20791 UK21186 UK22206 UK24596 UK28536 UK29692 UQ83681 UQ83723 UQ83811 UQ86485 UQ86675 UQ87003 UQ87270 UQ87941 UQ88578 UQ90345 UQ91027 UQ94636 UQ94998 UQ95015 UQ95199 UQ96310 UQ96424 UQ96709 SUPING VER(001) = DK18613 DK30234 DK32310 DK35745 UK17863 UK19934 UK23804 MACUPD = IPST MOD = DFSCLMR0 DFSEF00F DFSFXC40 DFSICLR0 SRCUPD = DFSCLMR0 DFSFXC40 DFSICLR0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK17863) SYS FMID(HMK9900) REASON(ACTION) DATE(07312) (++ + Hold for APAR PK To avoid the exposure introduced by PK04807/UK08318, the + + IMS Restart Data Set (RDS) must be formatted using one of + + the following: warm start restart > use /NRE FORMAT RS command emergency restart > use /ERE FORMAT RS command cold start. + ++). HOLDSYSTEM(INT) = DOC ++ HOLD(UK31054) SYS FMID(HMK9900) REASON(DOC) DATE(07312) (DOCUMENTATION CHANGE FOR APAR PK35745 SC Please delete the following sentence from the " OTMA Unsolicited Messages" section: For example, message DFS555I, which notifies you that an application program abend occurred during transaction processing, is an unsolicited message that might be delivered by the backend system.). UK31088 TYPE = PTF DATE/TIME REC = :40:04 PRE VER(001) = UK02531 UK20208 UK24260 UQ88620 UQ95199 SUPING VER(001) = DK42589 MOD = DFSDVSM0

4 SRCUPD = DFSDVSM0 HOLDSYSTEM(INT) = DEP ++ HOLD(UK31088) SYS FMID(HMK9900) REASON(DEP) DATE(07313) (++ + Hold for APAR PK This apar when combined with apars OA16819 and OA from VSAM will provide VSAM diagnostic information in the + + DL/I JRNAD and UPAD trace entries. The macros included in + + OA16819 must also be picked up in the target zone syslib + + concatenation. Apar PK42589 is reliant on one of the + + macros in OA16819 and if that macro is not accessible + + when applying this apar the following assembly error + + will occur. + + ** ASMA254I *** MNOTE *** ,XVIM151 UNIDENTIFIED FUNCTION + + If the PTF for PK42589 is applied to an IMS which + + does not contain code for OA16819 and OA21714 the + + function added by PK42589 will not be invoked. The + + code will work as it did prior to this apar and will + + trace using the PLH stack. The VSAM apars, + + OA16819 and OA21714, are provided for z/os 1.3 and above. + + Note: Apar processing for PK42589 will cause DFSDVSM0 + + to be assembled. The assembly of DFSDVSM0 requires OA Normal processing of the PTF for PK42589 will not require + + the assembly of DFSDVSM0( text deck provided ). + ++). HOLDSYSTEM(INT) = DOC ++ HOLD(UK31088) SYS FMID(HMK9900) REASON(DOC) DATE(07313) (DOCUMENTATION CHANGE FOR APAR PK42589 LY ******************************************************** * IMS V9 Diagnosis Guide and Reference( LY ) * ******************************************************** A change has been made in Chapter 8 ( DBDatabase service aids ) in the DL/I trace section to the X'DA' trace. The change is denoted with a *. TRACE ID = X'DA' word 0 byte 1 X'DA' VSAM JRNAD or UPAD exit byte 2 PST number bytes 34 Trace sequence number word 1 Word 3 of JRNAD or UPAD parameter list word 2 Word 4 of JRNAD or UPAD parameter list word 3 Word 5 of JRNAD or UPAD parameter list word 4 byte 1 JRNAD or UPAD code (For an explanation of these codes, see note 5 below) word 4 bytes 24 AMB address * word 5 PLH STACK or VSAM FOOTSTEPS * (see notes 1 4 below) * word 6 PLH STACK or VSAM FOOTSTEPS * (see notes 1 4 below) * word 7 PLH STACK or VSAM FOOTSTEPS * (see notes 1 4 below) * Notes to Figure 127: * 1. If the trace contains the PLH stack entries, these * entries are the module addresses of the last five VSAM

5 * record management modules that had control. * If the trace contains the VSAM footsteps, each VSAM footstep * is a 1 byte entry which contains VSAM diagnostic * information.). UK31307 TYPE = PTF DATE/TIME REC = :40:05 PRE VER(001) = UK03006 UK20141 UQ85680 UQ87355 UQ90387 UQ93849 UQ95984 SUPING VER(001) = DK45617 MOD = DFSFDLS0 DFSUARC0 DFSUARP0 SRCUPD = DFSFDLS0 DFSUARC0 DFSUARP0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK31307) SYS FMID(HMK9900) REASON(DOC) DATE(07319) (DOCUMENTATION CHANGE FOR APAR PK45617 GC GC ***DOC CHANGE*** In Doc: IMS V9 Messages and Codes Vol. 1 DFSMC1G2 GC IMS User Abend Codes Explanation: The IMS system abnormally terminates for one of these reasons: The system log for IMS batch could not be opened. Reg 15 = 1 The output SLDS (IEFRDER/2) are allocated to an extended format dataset. Reg 15 = 2 The macro ISITMGD returned a nonzero return code. Reg 15 = 3 System Action: IMS terminates abnormally. Programmer Response: If Reg 15 = 1, Make sure the DD statement for the IEFRDER has been included and is specified correctly, then resubmit the job. If Reg 15 = 2, Reallocate the output SLDS (IEFRDER/2) to a nonsms striped dataset. If Reg 15 = 3, ISITMGD failure. ************************************************************** In Doc: IMS V9 Messages and Codes Vol. 2 DFSMC2G2 GC DFS Messages, DFS3000I DFS3499I DFS3263I **after: (DBRC MODULE NOT FOUND)

6 **add: (INPUT SLDS ALLOCATED TO AN EXTENDED FORMAT VOLUME)' (NONZERO RETURN CODE FROM ISITMGD)). UK31320 TYPE = PTF DATE/TIME REC = :40:06 SOURCEID = HIPER PUT0711 SMCCOR PRE VER(001) = UK00926 UK04702 UK10128 UK15219 UK26759 UK28720 UQ83716 UQ85867 UQ86854 UQ87046 UQ88516 UQ89967 UQ91776 UQ95535 SUPING VER(001) = DK03667 DK14681 DK18771 DK25781 DK28424 DK36279 DK46179 DQ84031 DQ84369 DQ98147 UK03956 UK11445 UK12744 UK16954 UK19396 UK21370 UQ85914 UQ86457 UQ96590 MOD DFSRDBL0 SRCUPD DFSRDBL0 = DBFARDB0 DBFERS20 DBFMFLG0 DBFMLOG0 DBFMSRT0 DBFSLGE0 DBFUMAL0 DFSRDBC0 = DBFARDB0 DBFERS20 DBFMFLG0 DBFMLOG0 DBFMSRT0 DBFSLGE0 DBFUMAL0 DFSRDBC0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK31320) SYS FMID(HMK9900) REASON(ACTION) DATE(07319) (++ + HOLD FOR APAR PK THIS HOLD ONLY APPLICABLE TO IMS DATA SHARING USERS + + WITH DATABASE SHARE LEVEL APAR PK46179 changes the content of IMS log records. + + See below for further details of the content change. + + PK46179 does not require concurrent application to all + + IMS Share Level 2 Data Sharing Systems, but until PK is applied across all systems it will not provide complete+ + protection. You may apply PK46179 on each system as your + + schedule permits. + + After the fix is applied across all systems, a new Image + + Copy of Share Level 2 data bases must be taken before + + running the IMS Change Accumulation utility. The new + + Change Accum runs will then work correctly for Share + + Level 2 data bases. + + In case of data sharing across different releases of IMS, + + these corresponding fixes also need to be applied: + + IMS VERSION 8: PK IMS VERSION 9: PK IMS VERSION 10: PK ********************************************************* APAR PK46179 changes the content of IMS log records. Log record type (in hex): x'50' Full Function Data Base Update x'5950' Fast Path Data Base Update Apar fills in IRLM Lock Sequence Number DLOGLSN for data bases defined to DBRC as share level 2 SL2 "Intrahost". Previously, this was only done for share level 3 "Interhost". Any user modifications or nonibm vendor software which references these log records must be changed and/or reassembled to account for the new content for share level 2 data bases. *********************************************************). HOLDSYSTEM(INT) = ACTION ++ HOLD(UQ96590) SYS FMID(HMK9900) REASON(ACTION) DATE(07319)

7 (++ + HOLD for ACTION APAR PQ After applying the service: + + If any database fails Change Accum Utility with DFS3335A: + + DFS3335A LOG INPUT IS NOT IN SEQUENCE FOR FUNCTION CA + + The following procedure is recommended: /DBR DB on all systems Run batch Image Copy for the database to establish + + a good recovery point + + (Change Accum Utility does not request logs with + + bad Data Set Sequence Number (DSSN)) /STA DB on all systems + ++). UK31469 TYPE = PTF DATE/TIME REC = :40:08 PRE VER(001) = UK23853 UK28608 SUPING VER(001) = DK54929 MAC = DFSKBL13 DFSKBS13 DFSK441P MOD = DFSKXTR0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK31469) SYS FMID(HMK9900) REASON(DOC) DATE(07324) (DOCUMENTATION CHANGE FOR APAR PK54929 SC In the chapter: Trace Record Extract Utility (DFSKXTR0) topic: Control Keywords for DFSKXTR0 subtopic: Global Keywords UK31761 TYPE = PTF DATE/TIME REC = :40:12 SOURCEID = SMCCOR SUPING VER(001) = AK38719 DK38719 MACUPD = XC00 MOD = DFSFXC00 SRCUPD = DFSFXC00 X67FF Indicates that x'67fa' data contained in x'67ff' log records is to be included in processing and is to be formatted as if it were extracted from an X'67FA' trace record END of DOC change Part DFSKXTR0 was changed to only retrieve the x'67ff' data when keyword X67FF has been supplied as a control statement. Panel DFSKBL13 was changed to allow users to specify that they wish to process x'67ff' records along with the x'67fa' records. Skeleton DFSKBS13 was changed to include the keyword X67FF as a control statement when the user has indicated such on panel DFSKBL13. Help panel DFSK441P was created to supply help for using this panel option.).

8 HOLDSYSTEM(INT) = AO ++ HOLD(UK31761) SYS FMID(HMK9900) REASON(AO) DATE(07333) (********************************************************* + Hold for APAR PK This APAR changes or affects an IMS message. IMS Message number: DFS2450I and DFS2451W Any user exits or nonibm vendor software which are sensitive to this message may need to be changed. See the APAR closing text or PTF cover letter for complete details *********************************************************). UK31762 TYPE = PTF DATE/TIME REC = :40:13 SOURCEID = SMCCOR FMID VER(001) = JMK9901 PRE VER(001) = UK14771 REQ VER(001) = UK31761 SUPING VER(001) = AK31846 AK38719 AK45821 DK38719 UK20288 UK28370 MOD = DFSFXC10 SRCUPD = DFSFXC10 HOLDSYSTEM(INT) = AO ++ HOLD(UK31762) SYS FMID(JMK9901) REASON(AO) DATE(07333) (********************************************************* + Hold for APAR PK This APAR changes or affects an IMS message. IMS Message number: DFS2450I and DFS2451W Any user exits or nonibm vendor software which are sensitive to this message may need to be changed. See the APAR closing text or PTF cover letter for complete details *********************************************************).