Part No. Model Torque Capacity Head A (in.) B (in.) C (in.) D (in.)

Transcription

1 SLTC Hardwired Series capacity. ISO 689. Five of seven models use the incredibly strong SR dovetail and can be used with any of over 00 SR Interchangeable Heads. setting and discourages unauthorized torque setting changes. Excellent audible and tactile impulse when preset torque is achieved. excellent ergonomics. Slender body facilitates use in con Microswitch closes when tool clicks and opens immediately when pressure is released. Separate cable with connector (required) facilitates replace ment if damaged. Rated at 60 VAC/ VDC at Amperes maximum Over 00 interchangeable heads to choose from without changing torque values. Simply slide the heads on and lock on quality. Wired Interchangeable Head Part No. Model Torque Capacity Head A (in.) B (in.) C (in.) D (in.) Weight (lbs.) 8084 SLTC 0 I 0 in. lb.-0 in. lb. /.4 Nm- Nm Dovetail SLTC 00 I 60 in. lb.-00 in. lb. / 6.8 Nm-4 Nm Dovetail SLTC 0 I 0 in. lb.-0 in. lb. /.0 Nm-8 Nm Dovetail SLTC 800 I 60 in. lb.-800 in. lb. / 40.8 Nm-204 Nm Dovetail SLTC 600 I 20 in. lb.-600 in. lb. / 0.6 Nm-408 Nm Dovetail SLTCS 200 I 440 in. lb.-200 in. lb. / Nm /4 SD SLTCR 200 I 440 in. lb.-200 in. lb. / Nm /4 SD Ratchet Cable for SLTC Cable with plug, Switch Wrench, SLTC 0I only, coiled 2 extended 042 Cable for SLTC Cable with plug, Switch Wrench, all SLTC/SLTCS/SLTCR models except 0I, coiled 2 extended 0442 Cable For SLTC 0 I Wrench: Right Angle Cable, Switch Wrench to bare end, coiled 2 extended 042 Cable Cable, Switch Wrench to bare end, all SLTC/SLTCS/SLTCR except 0I, coiled 2 extended 00 Cable Straight Cable, no coil, Switch Wrench to bare end. 2 in length. Page 8 Sturtevant Richmont

2 Other SLTC Part 042 For SLTC 0 Part 0442 Heavy Duty Spiral Cable With Moulded Connector

3 Standard Spiral Cable Part 208 Part 208A

4 T o r q u e A p p l i c a t i o n T o o l s FLARE NUT (FN) 6 Common Centerline FLARE NUT - ENGLISH Number Model Size (in. lbs.) 8902 FN FN FN FN FN FN FN FN FN FN FN FN FN FN FN FN FN BOX HEAD (BH) 6 Common Centerline BOX HEAD - ENGLISH Number Model Size (in.lbs.) BH BH BH BH BH BH BH BH BH BH BH BH BH BH BH BH BH HEX DRIVE (HD) 6 CommonCenterline HEX DRIVE - ENGLISH Number Model Size (in. lbs.) 800 HD HD HD HD HD HD HD HD HD HD HD HD HD HD HD HD FLARE NUT - METRIC Number Model Size (Nm) FN-8mm 8mm FN-9mm 9mm FN-0mm 0mm FN-mm mm FN-2mm 2mm FN-2mm* 2mm FN-mm mm FN-4mm 4mm FN-4mm* 4mm FN-mm mm FN-6mm 6mm FN-mm mm FN-8mm 8mm FN-9mm 9mm FN-2mm 2mm FN-22mm 22mm FN-24mm 24mm FN-2mm 2mm 8 * 6 pt hex BOX HEAD - METRIC Number Model Size (Nm) 8090 BH-mm mm BH-8mm 8mm BH-9mm 9mm BH-0mm 0mm BH-mm mm BH-2mm 2mm BH-mm mm BH-4mm 4mm BH-mm mm BH-6mm 6mm BH-mm mm BH-8mm 8mm BH-9mm 9mm BH-2mm 2mm BH-22mm 22mm BH-24mm 24mm BH-2mm 2mm HEX DRIVE - METRIC Number Model Size (Nm) 809 HD-4mm 4mm 8096 HD-mm mm HD-6mm 6mm HD-8mm 8mm HD-0mm 0mm HD-2mm 2mm HD-4mm 4mm HD-9mm 9mm 20 See website for head dimensions. FLARE NUT (FN) BOX HEAD (BH) HEX DRIVE (HD) Sturtevant Richmont Page 2

5 Sturtevant Richmont Interchangeable Heads RATCHETING OPEN END (ROE) RATCHETING OPEN END (ROE) 6 Common Centerline Slight disengagement from the fastener allows operator to rapidly rotate wrench. RATCHETING OPEN END - ENGLISH Number Model Size (in. lbs.) ROE ROE ROE ROE ROE ROE ROE ROE ROE ROE ROE ROE ROE ROE RATCHETING OPEN END - METRIC Number Model Size (Nm) 892 ROE-mm mm 8928 ROE-8mm 8 mm ROE-9mm 9 mm ROE-0mm 0 mm 8922 ROE-mm mm ROE-2mm 2 mm ROE-mm mm ROE-4mm 4 mm ROE-mm mm ROE-6mm 6 mm ROE-mm mm ROE-8mm 8 mm ROE-9mm 9 mm ROE-22mm 22 mm ROE-24mm 24 mm ROE-2mm 2 mm ROE-2mm 2 mm 20 RATCHETING FLARE NUT (RFN) 6 CommonCenterline Single-direction ratchet for use with hydraulic or pneumatic fittings. Number Model Size (Nm) RFN-0mm 0 mm RFN-mm mm 2 RATCHETING FLARE NUT (RFN)

6

7

8 OE-6 mm SP OFFSET & Ratchet ROE-0 mm for Brake Line Special Head for Starter Motor SP HD-24 mm Pump Tool

9 SPECIAL TOE-IN ADJUSTMENT TOOL A/F 2 mm to be used with Sturtuvent Richmont SLTC 0 hardwired switch wrench developed for Volkswagen

10 T o r q u e A p p l i c a t i o n T o o l s STANDARD TOOLING ADAPTERS* When fabricating special heads to be used with CCM torque handles other than Model CCM 00 and CCM 400, the 6 in. dimension must be maintained between the inside of the attachment block and the centerline of the wrench head. Model CCM 00 and CCM 400 are calibrated to 8 in. common centerline. Part Max.Torque Number Model (in. lbs.) 8990 STA STA STA * Made of heat treated 440 alloy steel. STANDARD TOOLING ADAPTER STRAIGHT EXTENSION Part Angle Max.Torque Number Model (degrees) (in. lbs.) LTCE LTCE LTCE LTCE ANGLE EXTENSION Part Angle Max.Torque Number Model (degrees) (in. lbs.) 8948 LTCE LTCE ADAPTERS FOR DIN STYLE HEADS Can be used to convert most DIN style heads to a female dovetail for use on all S/R LTC series wrenches. Torque values should be set with the adapter and head attached to the wrench. Because of the variation in the length of the DIN plug type heads it is not recommended that this adapter be used with CCM micrometer adjustable wrenches. STRAIGHT AND ANGLE EXTENSIONS Part Number Model 896 Adapter, 9mm x 2mm 89 Adapter, 4mm x 8mm ADAPTERS FOR ROUND STYLE HEADS ADAPTER FOR DIN STYLE HEADS Can be used to convert most round style heads to a female dovetail for use on all S/R LTC series wrenches. Torque values should be set with the adapter and head attached to the wrench. Because of the variation in the length of the round plug type heads it is not recommended that this adapter be used with CCM micrometer adjustable wrenches. Part Number Model Description 802 BAJ J size female-female dovetail 8022 BAY Y size female-female dovetail ADAPTER FOR ROUND STYLE HEADS Sturtevant Richmont

11 - Sales & Services In India Error-Proofing Solution for Assembly Lines Office No. 2, st Floor, Hermes Atrium, B wing, Plot, Sector, CBD Belapur, Navi Mumbai Mob: Tel: Telefax: Website westecnavimumbai@vsnl.net