Standard. Basic Switches. Standard
|
|
|
- Sheila Carr
- 6 years ago
- Views:
Transcription
1 or application help: call oneywell SensingandControl BZ/B Series IN LUNR BZ/B TY Dim. Dwg. ig. 1 SLD TY Dim. Dwg. ig. 2 B/B TY Dim. Dwg. ig. 3 Characteristics: O.. Operating orce; R.. Release orce;.t. retravel; O.T. Overtravel; D.T. Differential Travel; O.. Operating osition. by ascending electrical capability Data nd O.. R.. min..t. max. O.T. min. D.T. O..** Catalog Listing Recommended or age ounces ounces inches inches inches inches BZ-2R72-2 BZ-2R721-2 BZ-2R2-2 pplications requiring gold old Operating in temp. to +00 (20 C) for 100 hours 1 mp 0,13 1, mp 2,22-,17 0,13 0,01-0,0 1, mps 0,13 1,88 B.00.2 BZ-R21-2 Lower force 10 mps 0,30 0,13 0,00-0,013 1,88 C BZ-2R-2 WZ-2R-2 Most applications SDT SST (normally closed) 0,13 1, ,13 1, YZ-2R-2 SST (normally open) 0,13 1, BZ-R-2 Less differential travel 1,-2, 0,30 0,13 0,00-0,008 1,88 D BZ-R1-2 Best repeatability 1,-3,3 0,30 0,13-0,2 0,00-0,02 1,2 D BZ-2R2-2 BZ-2RT0 (880/1-00) BZ-2R0-2 BZ-2R1-2 BZ-2R-2-S B-2R-2 B-2R2-2 BM-1R-2 B-2R- Operating in temp. to +20 (121 C) MIL-S-880 application Best stability under varying humidity Best service for sealed construction. Stainless steel internal snap spring. Operating in temperature to +20 (121 C) 0,13 1, ,7 0,13 1, ,13 1, mp 2,-,17 0,13 0,01-0,0 1, ,-,17 0,13 0,01-0,0 1, mps 3,8-,12 2,78 0,2 0,0-0,1 1, mps 3,8-,12 2,78 0,2 0,0-0,1 1, mps 1,-2,78 0,13 0,013-0,02 1, mps 3,8-,12 2,78 0,2 0,0-0,1 1, Dim. Dwg. ig. BZ-RX W-1RX- *Reset characteristics. Manual reset (maintained contact) applications, solder terminals Manual reset SST- NC, terminals 1,-2, 0,30 0,13 1, ,-2,78* * mps 0,2 0,20 1,2 W ,* 27,* ll catalog listings shown are not necessarily stock items. Stocking depends on sales experience. xcept where stated ** ±mm ± in. uxiliary actuators see p. 2-3.
2 0 oneywell Sensing and Control orapplicationhelp:call BZ/B Series OVRTRVL LUNR Dim. Dwg. ig. 11 Characteristics: O.. Operating orce; R.. Release orce;.t. retravel; O.T. Overtravel; D.T. Differential Travel; O.. Operating osition. Data and O.. R.. min..t. max. O.T. min. D.T. O..* Catalog Listing Recommended or age ounces ounces inches inches inches inches BZ-2RD72-2 BZ-2RD-2 BZ-2RD2-2 BM-1RD-2 pplications requiring gold dded overtravel. or manual operation and slow 20 (max) cam rise to +20 (121 C) 1 mp 22 mps 1,-2,78 0,013-0, BZ-2RDS721-2 pplications requiring gold plus dustproof and splash 1 mp 3,1-, Dim. Dwg. ig. 12 BZ-2RDS1-2 3,1-, B-2RB-2 B-2RB- 20 mps 2 mps 3,8-, ,8-, , , ,3.0 2,3.0 0,0-0, ,0-0, , , Dim. Dwg. ig. 13 BZ-2RS72-2 pplications requiring gold 1 mp BZ-2RS-2 dded overtravel. or in-line operation and with JR auxiliary actuators BZ-2RS2-2 to +20 (121 C) BZ-2RST0 (M880/1-012) MIL-S-880 application 1,7 Dim. Dwg. ig. 1 BZ-RSX Manual reset solder terminals 1,-2, 7-0, ,.02 2, BM-1RS-2 22 mps 1,-2,78 0,013-0, BZ-2RS pplications requiring gold plus dustproof and splash 1 mp 2,-,17-1 Dim. Dwg. ig. 1 BZ-2RS1-2 2,-,17-1 *±0,1 mm ±.020 in.
3 or application help: call oneywell SensingandControl 1 BZ/B Series OVRTRVL LUNR Dim. Dwg. ig. 1 Data and O.. R.. min..t. max. O.T. min. D.T. O..** Catalog Listing Recommended or age ounces ounces inches inches inches inches BZ-2RQ-2 BZ-2RQ2-2 dded overtravel. or manual in-line operation and for slow 30 (max) rise cams to ±20 (121 C) 38,10±0,1 1.00± ,10±0,1 1.00±.020 BZ-2RQ172-2 pplications requiring gold 1 mp BZ/BM TY BZ-2RQ1-2 BZ-2RQ-2 type applications with panel mount BZ-2RQ1T0 (M880/1-020) MIL-S-880 application 1,7 BZ-2RQ12-2 to ±20 (121 C) Dim. Dwg. ig. 17 BZ-2RN702 urnished with unassembled seal boot. X 0.1 3, ,±0,0 1.0±.020 B TY BZ-RQ1X Manual reset. Solder terminals 1,7-2, -. 0, ,2±1,1.22±.0 7,1*.281* Dim. Dwg. ig. 18 B-2RQ1-2 BM-1RQ mps 22 mps 3,8-, ,-2,78 2, ,0-0, ,013-0, Dim. Dwg. ig. 1 BZ-2RQ BZ-2RQ18-2 BZ-2RQ182-2 BZ-2Q18T1 BM-1RQ18-2 pplications requiring gold dded overtravel. Roller plunger for rapid cam (30 max) rise and slide operation. anel mount to ±20 ) (121 C) Double-break circuitry 1 mp T 22 mps 3,8-, ,-2,78 0, , ,03-0, ,013-0, ,32±1, ±.0 33,32±1, ±.0 33,32±1, ±.0 33,3±1, ±.07 33,32±1, ±.0 BZ-2RQ181-2 pplications requiring roller plunger 0 to major axis of switch.10 33,32±1, ±.0 Dim. Dwg. ig. 20 * Reset characteristics. xcept where stated ** ± mm ±.030 in.
4 2 oneywell Sensing and Control orapplicationhelp:call STRIT LVR BZ/B Series Characteristics: O.. Operating orce; R.. Release orce;.t. retravel; O.T. Overtravel; D.T. Differential Travel; O.. Operating osition. BZ/BM TY Dim. Dwg. ig. 21 B TY Dim. Dwg. g. 23 DJUSTBL Data and O.. max. R.. min..t. max. O.T. min. D.T. O..** Recommended Catalog Listing or age ounces ounces inches inches inches inches BZ-2RW BZ-2RW BZ-2RW82-2 BZ-RW83-2 BZ-2RW87T BZ-2RW80-2 BZ-2RW8-2 BZ-2RW801-2 BZ-2RWT0 (M880/1-0) BZ-2RW82-2 BZ-RW80X BZ-2RW83-2 B-2RV-2 BM-1RW8-2 B-2RV- * Reset characteristics. pplications requiring gold alloy contacts Best stability under varying humidity. old with seal Operating in temp. to +00 (20 C) for 100 hours Lowest operating force (without external return spring) 1.2 inch lever inch lever Lower force (without external return spring) Dustproof and splash MIL-S-880 application Operating in temperature to +20 (121 C) Manual reset solder terminals inch lever Up to 20 ampere load Up to 22 ampere load Up to 2 ampere load 1 mp 1 mp mps B 10 mps I 20 mps 22 mps 2 mps 0,07.2 1,7 1-0, , ,1 0. 0,1 0. 0,1 0.,7.2 0,2 1. 0,1 0. 0, , ,1 0. 0, ,2.2 0, ,1 0. 0, ,1 0. 1,88.2 7,.27 1,88.2 0,2.11, , , , , ,10-0, , , , ,3.03 0, ,0 * 7,1* ,7.00 1, , ,-3, , ,13-0, ,77.10 max. ± ± BZ-2RW8-2 djustable operating point (17 mm to 22 mm).70 to ,.12 0, ,02-22, Dim. Dwg. g. 22 BZ-2RM-2 Reverse acting actuator (switch plunger depressed in free position) 1,7 1 0,10-0, mm rom O...70 in. xcept where stated ** ±0.7 mm ±.030 in. Dim. Dwg. ig. 2
5 or application help: call oneywell SensingandControl 3 BZ/B Series SIMULTD ROLLR Dim. Dwg. ig. 27 O.. R...T. O.T. Data nd max. min. max. min. D.T. O..** Catalog UL Code newtons newtons mm mm mm mm Listing Recommended or age ounces ounces inches inches inches inches BZ-2RW BZ-2RW inch (2,7 mm) (simulated roller) lever applications 1.0 inch (8,3 mm) (simulated roller) lever applications 1,7 0,2 2,3 0,08-0,1 30, ,7 0,21 3, 0,10-1,0 30,17± ±.030 ROLLR LVR BZ-2RW pplications requiring gold alloy contacts BZ-2RW pplications requiring gold alloy BZ/BM TY contacts plus dustproof and splash BZ-2RW inch (2,7 mm) (steel roller) lever applications Dim. Dwg. ig. 2 Dim. Dwg. ig. 28 B/B TY 1 mp 1,7 0,2 2,3 0,08-0,1 30, mp 1,7 0,2 2,3 0,08-0,1 30, ,7 0,2 2,3 0,08-0,1 30, BZ-2RW Roller turned 0-1,81 0,3 3,8 0,08-0, max BZ-2RW Operating in 1,7 0,2 2,3 0,08-0,1 30,17 temperature to +20 (121 C) BZ-2RW BZ-2RW822-2-S B-2RV22-2 BM-1RW822-2 B-2RV22- Dustproof and splash Best service for sealed construction. Stainless steel internal snap spring. Up to 20 ampere load Up to 22 ampere load Up to 2 ampere load 1,7 0,2 2,3 0,08-0,1 30, ,7 0,2 2,3 0,08-0,1 30, mps 1,7 0,2,3 1,1 2, max mps 1,7 0,2 2,3 0,02-0,33 30, mps 1,7 0,2,3 1,1 2, max BZ-2RW822-2 BZ-2RW82-2 djustable operating point. Roller lever 1.0 inch (2,7 mm) djustable operating point. Roller lever 1.0 inch (8,3 mm) 1,7 0,2 1,02 0,08-0,1 2,77-30, ,7 0,21 2,1 0,10-1,0 2,2-31, Dim. Dwg. ig. 2 xcept where stated * ± mm ± in.
6 oneywell Sensing and Control orapplicationhelp:call BZ/B Series ROLLR LVR Characteristics: O.. Operating orce; R.. Release orce;.t. retravel; O.T. Overtravel; D.T. Differential Travel; O.. Operating osition. BZ/BM TY Dim. Dwg. ig. 2 B/B TY O.. R...T. O.T. Data nd max. min. max. min. D.T. O..* Catalog Recommended UL Code newtons newtons mm mm mm mm Listing or age ounces ounces inches inches inches inches BZ-2RW BZ-2RW82-2 BZ-2RW821-2 BZ-2RW822-2 B-2RV2-2 BM-1RW82-2 pplications requiring gold, plus dustproof, and splash 1.0 inch (8,3 mm) (steel roller) lever applications Operating in temperature to +20 (121 C) 1 mp 0,7 0,21 3, 0,10-1,0 30,17± ±.030 0,7 0,21 3, 0,10-1,0 30,17± ±.030 0,7 0,21 3, 0,10-1,0 30,17± ±.030 0,7 0,21 3, 0,10-1,0 30,17± ± mps 0,7 0,1 11,8 2,1 30,17± ± mps 0,7 0,21 3, 0,08-0, 30,17± ±.030 Dim. Dwg. ig. 30 B-2RV2-2 mps 0,7 0,1 11,8 2,1 30,17± max ±.030 NOT: or adjustable operate point and simulated roller lever switches, refer to previous page. Dim. Dwg. ig. 31 BZ-RW22-2 Best repeatability and O.. stability 10 mps 3,3 2, 0,013-0,02 31,37 I Dim. Dwg. ig. 32 BZ-2RW82-2 One-way roller (, mm 3,8 mm).37 dia..1 wide roller BZ-2RW82-2 One-way roller (,83 mm,83 mm).1 dia..1 wide roller 1,7 0,2 2,3 0,08-0,1 1, ,22 0,2 28, xcept where stated * ± mm ± in.
7 or application help: call oneywell SensingandControl BZ/B Series LXIBL L BZ TY Dim. Dwg. ig. 33 B/B TY Dim. Dwg. ig. 3 Data and O.. max. R.. min..t. max. O.T. min. D.T. max. O..** Catalog Listing Recommended or age ounces ounces inches inches inches inches BZ-2RL-2 BZ-2RL1-2 BZ-2RLT0 (M880/1-001) BZ-2RL2-2 BZ-RLX B-2RL-2 B-2RL- orce and stability of the flexible leaf actuator MIL-S-880 application to +20 (121 C) Manual reset. Solder terminals 20 mps 2 mps 1, 7 0,83 3 2, 2, 0,1 0. 0,1 0. 0,1 0. 0, ,8 17,8 17,8 17,8 17,8 * 7,1* ,8 17,8 LXIBL ROLLR L BZ TY Dim. Dwg. ig. 3 B/B TY Data and O.. max. R.. min..t. max. O.T. min. D.T. max. O..* Catalog Listing Recommended or age ounces ounces inches inches inches inches BZ-RL2-2 BZ-2RL2-2 BZ-2RL21-2 BZ-2RL2T0 (M880/1-03) B-2RL2-2 B-2RL2- Operating in temp. to +20 (121 C) for 100 hours orce and stability of the flexible leaf with roller MIL-S-880 application mps B 20 mps 2 mps 1, 7 1, , 2, 0,1 0. 0,1 0. 0,1 0. 0, ,.0 1,.0 Dim. Dwg. ig. 3 * Reset characteristics ** ±0.7 mm ±.030 in.
Standard. Basic Switches. Standard
For application help: call1-800-537-695. Honeywell SensingandControl 7 STNDRD BSIC SWITCH CUT--WY The cut-a-way shown is representative of the standard basic switches described in this catalog. GENERL
Basic Switches Standard
6 Honeywell Sensing and Control Forapplicationhelp:call-800-537-695. ELECTRICL DT ND UL CODES STNDRD BSIC SWITCHES Most of the switches in this section are UL recognized and CS certified. The current and
MICRO SWITCH Premium Large Basic Switches BZ BA BM BE 6AS Series Issue 6. Datasheet
BZ B BM BE 6S Series 004955 Issue 6 Datasheet DESCRITION ccurate, reliable, and repeatable, Honeywell MICRO SWITCH BZ/B/VBM/BE remium Series switches are designed and manufactured for a wide variety of
Actuator Series Common to Miniature, V-Size models
V/VX/D3V Common Accessories Ordering Information Actuators (Sold Separately) Actuators are supplementary components used when operating pin plunger switches using cams or dogs or when transmitting mechanical
MICRO SWITCH Premium Subminiature Basic Switches. SX Series. Datasheet
MICRO SWITCH Premium Subminiature Basic Switches SX Series atasheet MICRO SWITCH SX Series Premium Subminiature Basic Switches The industry-defining name in snap-action switches, Honeywell MICRO SWITCH
Special-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
MICRO SWITCH Premium Subminiature Basic Switches. SM Series. Datasheet
MICRO WITCH Premium ubminiature Basic witches M eries Datasheet MICRO WITCH M eries Premium ubminiature Basic witches The industry-defining name in snap-action switches, Honeywell MICRO WITCH premium subminiature
MICRO SWITCH Miniature Sealed Basic Switches. SE and XE Series. Datasheet
MICRO SWITCH Miniature Sealed Basic Switches SE and XE Series Datasheet MICRO SWITCH SE and XE Series Miniature Sealed Basic Switches Honeywell SE and XE miniature sealed basic switches are designed for
16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
Limit Switches E47 Precision Switches
June 09 E7 Precision Switches PG.0C.0.T.E 1 E7 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
SERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
SERIES 16, 26 & 18 MICROSWITCH
SERIES 16, 26 & 18 MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals for superior electrical contact Choice of
Universal Tongue-Operated Safety Interlock Switch
Rev. 12.07 C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed, B approved T12 Universal Tongue-Operated Safety Interlock Switch Strong and versatile the compact size of the strong,
D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
Add S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
TF2. Sealed. Miniature. SPST Maximum Current SPST, SPDT SPDT. 15 Amps. 10 Amps J-26 J-20 ZMS ZMB. Sealed. Standard Precision Poles/Throws SPDT SPDT
Product Selection Guide Series TF TFS TF2 TM LC LC LCS Switch Type Poles/Throws Miniature SPST, SPDT Sealed Miniature SPDT Sealed Miniature SPDT Miniature SPST, SPDT Subminiature Precision SPST, SPDT Subminiature
SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
MICRO SWITCH Sealed Subminiature Basic Switches. ZW Series. Datasheet
MICRO SWITCH Sealed Subminiature Basic Switches ZW Series Elblinger Elektronik GmbH Lange Wanne 25 38259 Salzgitter Datasheet Telefon 05341/8212-1 Fax 05341/821299 e-mail mail@elblinger-elektronik.de Internet
Miniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
Quick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
18/06/2013
V4 8318 Sealed High-current 83180 Part number made to order IP 67 protection Nominal ratings 0.1 A to 10 A / 250 VAC Minimum rating 1 ma / 4 VDC Operating temperature -40 C to +125 C Choice of actuators
SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
Contents. Volume 8 Sensing Solutions CA E February
Limit Switches.2 Product Description The E47 Compact Prewired Limit Switch by Eaton s electrical sector is designed to be a versatile, slim device for hard to fit applications where sealing integrity is
ZLS Series Global Limit Switches
GENERAL INFORMATION ZLS series limit switches are specifically designed for worldwide applications and is supported by Honeywell global resources for sales and after sales service. ZLS series limit switches
General Purpose Phenolic
Switch Features 8 Contact Ratings DC ratings optional Standard or light force versions available High temperature versions optional Agency approved long life versions optional Electrical Ratings and Operating
Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
Switches Selector Chart
Seal Type Switches Switches Selector Chart Turquoise Stroke Mini Switches Turquoise Stroke Switches ABJ (BJ) Turquoise Switches ABS (BS) Turquoise Switches ASQM Miniaturization achieved with changing from
Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
Z-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
Snap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
Circuitry (IEC ) Form A (SPST-NO) 50 mω maximum initial (at 1 A 5 Vdc) MV7: Reinforced thermoplastic UL 94 V-0. Roller: Thermoplastic
Changeover circuit with rating up to 15A Long life snap action contacts mechanism Wiping and self-cleaning contact action Options of operating force Variety of actuators and contact arrangements Quick
Standards. Electromechanical Safety Switches. Industrial Safety Products 179
Standards IEC 60947-1 explains the general rules relating to Low voltage switchgear and controlgear. The purpose of this standard is to harmonize as much as possible the product performance and test requirements
series Miniature snap-action switches
Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact
Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
SUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
ORDER GUIDES WITH STEEL ROD ACTUATORS WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS*
For application help: call 1-800-537-6945. Honeywell MICRO SWITCH Sensing and Control 89 Style 1 Style 2 Style 3 Style 4 Style 5 Style 6 Style 7 Style 8 Automatically cut power when service door or drawer
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
masterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
Series 47A: Miniature Rocker and Paddle Switches
SERIES 7A Miniature and Paddle Switches FEATURES Save Space and Weight,, PDT and PDT Circuitry Choice of Actuators and Terminations UL Recoginized DIP Switches S In inches (and millimeters) SP SP SP SP
Series 47A: Miniature Rocker and Paddle
Series 47A: Miniature Rocker and Paddle SERIES 47A Miniature Rocker and Paddle Switches FEATURES Save Space and Weight,, PDT and 4PDT Circuitry Choice of Actuators and Terminations UL Recoginized S in
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED
INCH-POUND MIL-PRF-8805/1F 19 November 18 SUPERSEDING MIL-PRF-8805/1E 31 October 01 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments
Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10
http://www.shinmei-e.co.jp Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10 [] Features Flux-resistant construction with integrally molded s. 4 variations with
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
High-current Dual-current
Sealed V Sealed IP 67 protection Nominal ratings. A to A/5 VAC Minimum rating ma/ VDC Operating temperature - C to +5 C Choice of actuators with possible fixing positions Main specifications High-current
Contactors and Contactor Assemblies
Contactor Industrial Controls Product Catalog 07 Section c o n t e n t s Section Overview / - /5 Product Overview /6 - /7 Contactors 3RT0, 3-pole to 95 /8 3RT0, 3-pole to 500 /9 3RT, 3-pole Vacuum to 500
Position switches FD series
Position switches FD series Selection diagram 01 08 10 11 18 19 0 04 05 Ø 8 mm Ø 1,7 mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 31 51 5 57 35 56 41 4 adjustable
Position switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 0 04 05 Ø 8 mm Ø 1, mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 51 5 5 5 56 41 4 adjustable lever
52 x 72 x 30 (2.05 x 2.83 x 1.18) N/C + N/O; N/C + N/C N/C + N/O N/C + N/O; N/C + N/C
Selection Guide Osiswitch Classic Design Classic Catalog number XCKM XCKL XCKJ Enclosure Metal Fixed or plug-in body, -4 C (-4 F) Features 3 conduit entries or +2 C (+248 F) versions Modularity Head +
MICRO SWITCH Standard Basic Switches V15 Series Issue 9. Datasheet
MIRO SWITH Basic Switches V Series 004945 Issue 9 Datasheet FETURES Broad range of electrical loads: 0.1, 5,,,, 26 service life: over one million mechanical operations Gold contacts are also available
14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
800 T A 1 A. f (cont'd) d (cont'd) f (cont'd) Momentary Contact Push Button Devices, Non-Illuminated. Rockwell Automation Publication 800-TD009A-EN-P
NEM Push Button Specifications 800T/H 30.5 mm Push Buttons Momentary Contact Push Button Devices, Non-Illuminated Flush Head Unit Cat. No. 800T-1 Extended Head Unit Cat. No. 800T-B6 Booted Unit Cat. No.
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Miniature Basic Switch
Miniature Basic Switch Reliable Basic Switches in a Wide ariation Wide variation of best-selling microswitches with switching currents of 10 to 21 A. Can be used for interrupting current when doors are
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
IEC Power Control Contactors and Contactor Assemblies
IEC Power Control Contactors and Contactor ssemblies Contents Pages Contents Pages Section Overview......................... / - /5 Product Overview......................... /6 - /7 Contactors 3RT0 / 3RT0,
Industrial Electromechanical Limit Switches
Industrial Electromechanical Limit Switches Honeywell offers an advanced line of heavy duty limit switches and a wide selection of application-proven enclosed switches (precision snap-acting switches sealed
Brochure Snap-Action Switches
2 Brochure Snap-Action Switches Switches for safety-related applications with robust and precise switch mechanism and positive opening operation More information here: schaltbau-gmbh.com WE GUARANTEE DOUBLE
General Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
OsiSwitch Limit Switches Innovation through modularity
OsiSwitch Limit Switches Innovation through modularity Osiswitch limit switches Simply Smart: Variable composition Note: All outline dimensions are in mm/inches Positive openings with rigid operators and
MICRO SWITCH Miniature Precision Limit Switches 914CE Series Issue 8. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS DIFFERENTIATION
MICRO SWITCH Miniature Precision Limit Switches 94CE Series DESCRIION All MICRO SWITCH 94CE Series compact enclosed switches incorporate fluorocarbon diaphragm sealing to provide reliable protection, meeting
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact
ZE/ZV/ZV2/XE/XV/XV2. (1) Built-in Switch (3) Actuator (4) Conduit/Ground Terminal *
Enclosed Switches ZE/ZV/ZV2/XE/XV/XV2 CSM_ZE_ZV_ZV2_XE _ XV_XV2_DS_E_2_1 General-purpose Enclosed Switches with High Breaking Capacity and High Durability Z General-purpose Basic Switches are built into
Limit Switches and Safety
Industrial Controls Product Catalog 217 Section contents 3SE International (IEC) 3SE5 General data Overview /4 - /9 3SE5 plastic enclosures Plastic, 31 mm Plastic, 5 mm 3SE5, selection and ordering data,
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
AM5 (QV) SWITCHES. Automation Controls Catalog
Automation ontrols atalog To Be Discontinued: Last time buy:march, 05 MINIATURE SWITHES WITH HIGH PREISION AM5 (QV) SWITHES 5.9 0. 7.8 FEATURES High precision as a result of designing ideal spring by using
ZE/ZV/ZV2/XE/XV/XV2. General-purpose Enclosed Switches with High Breaking Capacity and High Durability. Enclosed Switches. Model Number Structure
Enclosed Switches CSM_ZE_ZV_ZV2_XE_XV_XV2_DS_E_2_1 General-purpose Enclosed Switches with High Breaking Capacity and High Durability Z General-purpose Basic Switches are built into ZE, ZV, and ZV2 Switches.
HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH
HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally
V-3000 Series Miniature Basic Switches
6 V-3000 Series Miniature Basic Switches Specifications FEATURES V-type Microswitches (JIS C 4505) That Feature Excellent Tracking and That Use Special Thermosetting Resin Used in Switch Cases and Covers.
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
Pre-wired Models. (1) (2) (3) (4) (1) Rated Current
Enclosed Switch D4C CSM_D4C_DS_E_10_1 Compact Limit Switch That's Also Thin and Highly Sealed Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved
Ordering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
D4MC. Economical, High Utility Enclosed Switch. Enclosed Switch. Model Number Structure. Ordering Information. Specifications D4MC- (1) (2)
Enclosed Switch D4MC CSM_D4MC_DS_E_2_2 Economical, High Utility Enclosed Switch Enclosed Switches with Built-in Basic Switches for High Repeatability and Durability of Million Operations Minimum. Panel
Microswitches MS Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
Distinctive Characteristics
Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design
General-purpose Limit Switch
General-purpose Limit Switch Compact, Economical, Plastic-body Limit Switch Featuring Direct Opening Action Contacts Employs direct opening action mechanism that forcibly opens contacts, and assures accurate
DPDT Basic Switch for Two Independent Circuit Control
Special-purpose Basic Switch DZ CSM_DZ_DS_E DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square
L Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
Specifications. Description TABLE OF CONTENTS. Page. Description 2. Specifications 2 3. Additional Options 3. How to Order 4 5
TABLE OF CTENTS Page Description Specifications Additional Options How to Order Circuit Descriptions Dimensions 0 Icons into the body of the switch; mounting hardware or special tools are not necessary.
MICRO SWITCH Military-Grade Toggle Switches. TL Series. Datasheet
MICRO SWITCH -Grade Toggle Switches TL Series Datasheet MICRO SWITCH TL Series Toggle Switches Honeywell MICRO SWITCH TL Series toggle switches are military qualified to MIL-DTL-3950, specifications for
Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
MICRO SWITCH Military-Grade Toggle Switches TL Series Issue 4. Datasheet FEATURES POTENTIAL APPLICATIONS DESCRIPTION DIFFERENTIATION PORTFOLIO
MICRO SWITCH -Grade Toggle Switches TL Series 00530 Issue Datasheet FEATURES MIL-DTL-3950 qualified 1-, -, and -pole options - and 3-position, maintained and momentary Wide temperature range: -65 C to
ILLUMINATED PUSHBUTTON SWITCH
Jay-El P/N 10888 JAY-EL 10888 JAY-EL P/N 10888 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-2288 Catalog No. 081 11-03 GOLD CONTACTS Sea Level and 0,000 Feet JAY-EL 10888 ENGINEERING SPECIFICATIONS
Limit Switches and Safety
Limit Switches and Safety Introduction Contents Pages 3SE International (IEC) Limit Switches 3SE5 General data Overview......................................... 13/4-13/9 3SE5 plastic enclosures 3SE5,
83132 / / Subminiature Double Break Switches... 3/ Subminiature Switches... 3/ Sealed Subminiature Switches...
SWITCHES AND SENSORS SWITCHES AND SENSORS Snap Action Switches: 8 / 8 / 84 Subminiature Double Break Switches.................. / 870 Subminiature Switches.......................................... /6
Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
General Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV