Rotation diffuser RCW/RCWB
|
|
|
- Lindsay Morris
- 6 years ago
- Views:
Transcription
1 comfort Rotation diffuser RCW/RCWB, september 2009
2 rcw / rcwb RCW/RCWB Mounting RCW/RCWB is equipped with a Safe connection. he connection is mounted directly in the duct or fittings and is secured with pop rivets or duct screws. RCWB is equipped with 3 pcs. of ø 6mm thread rivets on top of the box for suspending of the box. Blade settings As standard the manual models are delivered with 30 degrees blade setting. If other blade settings are required these can be adjusted manually by using the enclosed angle meter. Adjustment Control of the air volume and adjustment is made on external dampers. 1 2 Maintenance o service the motor or cleaning the duct the diffusor is demounted from the duct/the box itself, whereafter there is free access to the duct. he visible parts of the diffusor and the box can be wiped with a damp cloth. 4 RCWB Demounting of RCW from the box (4) is done by disengaging m4 lock nut (1) from m4 threaded rod (2), pls. note that the blades have to be in vertical position. hereafter the diffusor is loose and can be disengaged from the box (4). When remounting you must be aware that the terminal strip (3) is placed properly on the box (4) o change the standard blade setting the plactic button (1) is demounted and the center nut (2) is loosened a bit. he angle meter (3) is placed towards the perforated plate (4) in the diffusor, whereafter you can turn the blades (5) to the wanted angle which is read on the angle meter (3). After that the center nut is tightened (2) and the plastic button (1) is mounted
3 rcw / rcwb RCW/RCWB Motorized models Choice of motortype he motorized models and the model with thermo actuator are as standard adjusted from 30 degrees to 75 degrees. If other settings are wanted these can be calibrated from the factory if ordered. RCW-1 / RCWB-1 RCW-1 / RCWB-1 size Belimo motor RCW with modulating electric motor Ød NM24A-MF-F Blade angel 75 α Control voltage (V) Ød LH24A-MF60 echnical data sheets NM24A-MF / LH24A-MF echnical data can be found on the following pages: NM24A-MF go to page 4. LH24A-MF go to page 9. RCW with thermal actuator Choice of motortype Blade angel α RCW-2 / RCWB-2 RCW-2 / RCWB-2 size Ød NM24A-F Belimo motor emperature (C ) Ød LH24A60 echnical data sheets NM24A / LH24A echnical data can be found on the following pages: NM24A go to page 15. LH24A go to page 17. 3
4 rcw / rcwb RCW-1/RCWB-1 4
5 rcw /rcwb RCW-1/RCWB-1 8 5
6 rcw / rcwb RCW-1/RCWB-1 6
7 rcw /rcwb RCW-1/RCWB-1 7
8 rcw / rcwb RCW-1/RCWB-1 8
9 rcw /rcwb RCW-1/RCWB-1 9
10 rcw / rcwb RCW-1/RCWB
11 rcw /rcwb RCW-1/RCWB
12 rcw / rcwb RCW-1/RCWB-1 a b c Z 4 SGA24 SGF24 SGE Z 4 SGA24 SGF24 SGE DC V 500 Ω ( ) (+) ma DC V DC V ZAD
13 rcw /rcwb RCW-1/RCWB-1 a b c d e a b B A 67 13
14 rcw / rcwb RCW-1/RCWB-1 14
15 rcw /rcwb RCW-2/RCWB
16 rcw / rcwb RCW-2/RCWB-2 16
17 rcw /rcwb RCW-2/RCWB
18 rcw / rcwb RCW-2/RCWB-2 18
19 rcw /rcwb RCW-2/RCWB-2 19
20 rcw / rcwb RCW/RCWB RCW mounting instruction with electric motor 20 mm hole is drilled in duct where connection is wanted. Put electric cable through drilled hole. Cable lead-in. Cable lead-in is mounted on electric cable. Cable lead-in is mounted in duct. 20
21 rcw /rcwb 21
22 Support Hjælp Hjälp uotetuki nterstützung Supporto Помощь K - Here you can find product updates/mounting instructions and support telephone number/mail. Right to alterations reserved. DK - Her kan du finde seneste produkt opdateringer/ montagevejledninger samt support tlf. nr/mail. Ret til ændringer forbeholdes. SE - Här kan du kan alltid hitta senaste produktuppdateringarna/montageinstruktioner samt support tlf. nr / mail. Rätt till ändringar förbehålles. FI - äältä löydät uusimmat tuotetiedot ja asennusohjeet sekä tuotetuen yhteystiedot. Oikeus muutoksiin pidätetään. DE - Hier finden Sie aktuelle Produktinformationen/ Montageanleitungen und elefonnummer/ - Adressen der Ansprechpartner. Änderungen vorbehalten. I - Qui potete trovare istruzioni di montaggio, informazioni sul prodotto ed un supporto tecnico qualificato numero/mail. Soggetto a modifica senza obbligo di preavviso. R - Здесь вы можете найти обновления изделия/ инструкции по монтажу и техн. поддержку по тел. / электронной почте. Сохраняется право на внесение изменений Do you have trouble finding your local contacts please go to: RCW / RCWB
Ceiling diffusers - visible
Ceiling diffusers - visible About Lindab Comfort and Design Product overview / symbols Theory Ceiling diffusers Ceiling diffusers - visible Plenum boxes Wall diffusers Nozzles Ventiduct Grilles Displacement
See «Overview of types» 90 s / 60 mm 150 s / 100 mm Manuelle Auslösung der Adaption durch Drücken der Taste «Adaption» oder mit dem PC-Tool
echnical data sheet LHA-MF..-P Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
Overview of types. Technical data
echnical data sheet SH2A-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency. Draft
echnical data sheet LH24A-MF2-P Parmeterisable linear actuator for adjusting dampers and slide valves in technical building installations Air damper size up to approx. m² Actuating force 5 N Nominal voltage
Power consumption In operation At rest For wire sizing
echnical data sheet Modulating damper actuator for adjusting air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx 08 m orque Nm
9.5 nominal torque 4.5 W 16 VA. Min. 30 nominal voltage Min. 30 Nm. Reversible with switch By mounting. MIN (minimum position)
echnical data sheet EF24A- Communicative spring return actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx.
Functional data Factory settings Variable Setting Torque Inhibiting torque
echnical data sheet GK4A-MF Parameterisable SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LH24A-00-P Communicative linear actuator adjusting dampers and slide valves in technical building installations Air damper size up to approx. m² Actuating force 50 N Nominal voltage
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK24A-SR Modulating SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for building
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LM24A- Communicative damper actuator for adjusting dampers in technical building installations Air damper size up to approx. m² Nominal torque 5 Nm Nominal voltage AC/DC 24 V Control
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet MQ24A-SR Modulating damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 0.8 m² Nominal torque 4 Nm Nominal voltage AC/DC 24 V Control
Terminal Equipment Controller Enclosure
Document No. 550-196 Terminal Equipment Controller Enclosure Product Description A Terminal Equipment Controller enclosure is a general-purpose metal cabinet with a removable cover that houses an electronic
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet GK24A-MF Parameterisable SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
Technical data sheet. Technical data
echnical data sheet LMQ4A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx 8 m orque 4 Nm Nominal
Instructions for installing your QuiltCam on your Gammill quilt machine.
Instructions for installing your QuiltCam on your Gammill quilt machine. The items include with your QuiltCam Items included in all packages: QuiltCam Control Box, See Figure 1 Power Supply, Figure 2 Video
DRI. VARIZON Displacement unit with adjustable spread pattern
VARIZON Displacement unit with adjustable spread pattern Quick facts Adjustable spread pattern and affected area Suitable for all types of rooms Cleanable Air volume measuring point Very simple to install
NKQB24-1, NKQX24-1 On/Off, Fail-Safe, Operation, Direct Coupled, 24V
NKQB24-1, NKQX24-1 On/Off, Fail-Safe, Operation, Direct Coupled, 24V orque min. 54 in-lb for control damper surfaces up to 12 sq ft. Application For proportional modulation of dampers in HVAC systems.
LM24A-MOD. Cable 1 m, 6 x 0.75 mm 2 RJ12 socket
echnical data sheet Damper actuator for Modbus for adjusting air dampers in ventilation and air conditioning systems in buildings orque 5 Nm Nominal voltage AC/DC 4V Communication via Modbus RU (RS-485)
NKQB24-1, NKQX24-1 On/Off, Electronic Fail-Safe, Direct Coupled, 24V
NKQB24-1, NKQX24-1 On/Off, Electronic Fail-Safe, Direct Coupled, 24V orque min. 54 in-lb for control damper surfaces up to 12 sq ft. Application For on/off, fail-safe control of dampers in HVAC systems.
Variable Flow Rate Control Unit
VAV Produktdata TEKNISK DOKUMENTATION VENTILATION BG BURCHARTH A/S Variable Flow Rate Control Unit Model BVAV-R: VAV unit that has circular section. BVAV-RS: VAV terminal unit. BVAV-Q: VAV unit that has
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 10 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
U-02d: Replace Feedback Device (Heidenhain Linear Scale)
Page 1 of 7 U-02d: Replace Feedback Device (Heidenhain Linear Scale) SAFETY FIRST o Follow all Caterpillar facility safety standards when performing this task. o Lockout/tagout is required when working
SRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
VIREO Ceiling with ALX
Square ceiling air diffuser with nozzles for supply air, with plenum box QUICK FACTS Flush design Suitable for VAV-applications Fast and easy installation Sealing ring, standard for spigot Energy efficient
s Spring return C / max C
echnical data sheet SF4A actuator for WORKS with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m orque 0 Nm Nominal
VAV system solution for non-pressure dependent applications in enclosed spaces
System information VAV-Universal VAV system solution for non-pressure dependent applications in enclosed spaces able of contents echnical data sheet Brief description 3 echnical data 4 Safety notes 5 Dimensions
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK4A- Damper actuator with capacitor technology for adjusting air dampers with emergency control function and extended functionalities in ventilation and airconditioning systems for
Conductor and Cable Marking Description and Handling
Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet GM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 40 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
Output Signal Active Note DC V. Electrical Data Power Supply DC V, ±10%, 1.4 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges 0 to 5/10 V, 4 to 20 ma outputs and Modbus functionality. NEMA 4X / IP65 rated enclosure. For monitoring the
Replacing the Galaxy II CRT Monitor with a Flat Screen Monitor Kit # 42638
Replacing the Galaxy II CRT Monitor with a Flat Screen Monitor Kit # 42638 This kit contains detailed instructions on removing a Galaxy II Daewoo monitor and replacing it with a 19 wide flat screen monitor.
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NKA-DKC L Modulating SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
IBISTM. Duct diffuser with discs for supply air
TM Duct diffuser with discs for supply air Quick facts 0 flexible distribution pattern High induction capacity Suspended installation Easy installation Modular length: 00 mm Available in alternative colours
Global Plasma Solutions. 10 Mall Terrace, Bldg C Savannah, GA (912) ph (877) fax
10 Mall Terrace, Bldg C Savannah, GA 31406 (912) 356-0115 ph (877) 270-5353 fax GPS-RN IOM MANUAL 10 Mall Terrace, Bldg C Savannah, GA 31406 (912) 356-0115 ph (912) 356-0114 fax GPS-RN RTU/AHU INSTALLATION
DuraTapTM. Testing Sieve Shaker
DuraTapTM Testing Sieve Shaker Operation & Set-up Manual Models: DT168 DT258 DT268 DT1612 DT2512 DT2612 Advantech Mfg 2450 S Commerce Dr., New Berlin, WI 53151 USA Telephone: 262-786-1600 (800) 511-2096
Table of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer
USER'S MANUAL Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer DEIF A/S Frisenborgvej 33 DK-7800 Skive
N20, N34 Series Non-Spring Return Direct Coupled Actuators
N0, N Series Non-Spring Return Direct Coupled Actuators INSTALLATION INSTRUCTIONS APPLICATION N0 and N Series Non-Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and
Item No.: /
Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet SF24A-MOD Communicative spring-return actuator with emergency control function for adjusting dampers in technical building installations orque motor 20 Nm Nominal voltage AC/DC 24 V
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet
IBIS. Duct diffuser with discs for supply air QUICK FACTS
Duct diffuser with discs for supply air QUICK FACTS 0 flexible distribution pattern Suspended installation Easy installation Modular length: 00 mm Standard colour White RAL 900 -- alternative standard
Removal and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
INSTALLATION INSTRUCTIONS ECONOMIZERS WITH EXHAUST. For Use with Bard 3-1/2 through 6 Ton Wall Mount Air Conditioners and Heat Pumps
INSTALLATION INSTRUCTIONS ECONOMIZERS WITH EXHAUST Model EIFM-5C For Use with Bard 3-1/2 through 6 Ton Wall Mount Air Conditioners and Heat Pumps Bard Manufacturing Company, Inc. Bryan, Ohio 43506 Since
Operating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
Keysight M8000 Series BER Test Solutions
Keysight M8000 Series BER Test Solutions J-BERT M8020A High-Performance BERT M8030A Multi-Channel BERT M8040A High-Performance BERT M8041A, M8051A, M8061A, M8062A, M8045A, M8046A & M8057A Tips for Preventing
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
LOOK hidden linear diffusers
hidden linear diffusers MADEL The hidden linear diffusers are designed to combine the aesthetics with the technical performance. They can be mounted in false ceilings hiding the frame with filler and leaving
2M IR Mini Dome Quick Installation Guide
1 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical overview.
skyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head
skyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head Features and Controls Sliding Plate Lock Sliding Plate Pan Handle Clamp Tilt Lock Pan Handle Safety Lock Knob Pan Lock Threaded Stud
Dual Mount Universal Kit Aftermarket CMOS Camera with Optional Parking Gridlines Installation Instructions (Kit # )
Please read thoroughly before starting installation and check that kit contents are complete. Items Included in Kit: Chassis Harness Power Harness with RCA connectors Camera mounted on license plate bracket
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Technical data sheets
echnical data sheets Ready-to-connect spring return actuator with emergency function for VAV and CAV units in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m 2 orque
HST -M2 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M2 Switching element with locking mechanism (Translation of Original Manual) HST-M2 Ident.-No.: 10214 HST-M2 Ident.-No.: 10626 HST-M2 Ident.-No.: 10218
Installation manual CF8-W-Disp-AL
Installation manual CF8-W-Disp-AL CO 2 transmitter with two relays mounted in industrial housing prepared for Modbus communication protocol 4 7 8 8 6 3 2 5 Wall plate 5 Snap-in lid 2 PCB (Factory supplied
A CLOSER LOOK. Electronic Fail-Safe Series Direct Coupled Actuators. The Belimo Difference. Brushless DC Motor for Added Accuracy and Controllability
Electronic Fail-Safe Series Direct Coupled Actuators A CLOSER LOOK Brushless DC Motor for Added Accuracy and Controllability Cut Labor Costs with Simple Direct Coupling Self-Centers on 1.05" or 3/4" with
GTH. Rectangular double deflection grille QUICK FACTS
Rectangular double deflection grille QUICK FACTS For supply air Adjustable air deflectors Cleanable Installed using mounting frames FHB / FHA or commissioning box TRG Standard colour White RAL 900 -- alternative
INSTALLATION INSTRUCTIONS ECONOMIZER WITH EXHAUST
INSTALLATION INSTRUCTIONS ECONOMIZER WITH EXHAUST MODEL WGSEIFM-5 For Use with Bard 3 through 5 Ton Step Capacity Wall Mount Air Conditioners with Gas Heat Bard Manufacturing Company, Inc. Bryan, Ohio
Liebert XDA Air Flow Enhancer. User Manual
Liebert XDA Air Flow Enhancer User Manual Technical Support Site If you encounter any installation or operational issues with your product, check the pertinent section of this manual to see if the issue
Grille. Min. - max. dimensions
Min. - max. dimensions 1 / 0 00 0 500 2 / 0 00 0 Description is a supply grille made from aluminum with curved adjustable blades, oriented 1-way or 2-way horizontal or vertical both for wall and ceiling
Assembly & Installation Guide ULTIMAKER 2.85/3.0
Assembly & Installation Guide ULTIMAKER 2.85/3.0 The Bondtech QR Extruder for 2.85/3.0 mm filament for use as a Bowden or a direct Extruder. The extruder uses high-quality industrial pneumatic push-fit
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Outdoor Motorized Dome. Quick Installation Guide 86085A
Outdoor Motorized Dome Quick Installation Guide 86085A3340020 Outdoor Motorized Dome Quick Installation Guide Please follow the installation steps below to set up Outdoor Motorized Dome IP Camera. Check
Installation & Operation Guide
Installation & Operation Guide Direct Digital VAV Controllers KMD-7001/7051 - VAV Terminal Units KMD-7002/7052 - Dual Duct VAV Units KMD-7003/7053 - Fan Induction Units 907-019-01C 1 Introduction This
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
ETM-2040 Service Manual
Introduction Novar s Electronic Thermostat Modules (ETMs) are intelligent control modules that provide local, direct digital control of unitary, packaged, staged HVAC systems. This document: Describes
HST -S1 Switching element (Translation of Original Manual)
Installation and Operating Manual for Components HST -S1 Switching element (Translation of Original Manual) HST-S1 Ident.-No.: 10222 HST-S1 Ident.-No.: 10228 HST-S1 Ident.-No.: 10223 HST-S1 Ident.-No.:
READ COMPLETELY BEFORE INSTALLING!!!
DOWNSHOT ECONOMIZER INSTALL INSTALLATION INSTRUCTIONS FOR 3-12.5 TON YORK PREDATOR GEN 7 OR NEWER ECONOMIZER DOWNSHOT CONFIGURATION CAS PART NUMBER 1023535 READ COMPLETELY BEFORE INSTALLING!!! IS NOT RESPONSIBLE
asense m III in industrial wall mounted housing / CO sensor with built-in general purpose controller
Manual for Installation CO 2 asense m III in industrial wall mounted housing / CO sensor with built-in general purpose controller 9 10 2 1 6 10 8 3 4 5 7 Fig. 1 1 Wall plate 2 PCB (Factory supplied mounted
General Information. Installation Instructions. 3S-4000 Folding Min-Till Drill Acre Counter Update. Used with: 3S-4000
Installation Instructions 3S-4000 Folding Min-Till Drill Used with: 3S-4000! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the
Installation Manual IP-Kamera Integration
IP-Kamera Integration Getting started Congratulation with your new SuperSail product. We hope that you will be satisfied with the product and we are always available to give support in case you need it.
MAXIMA+ Series Rotary Level Indicator
MAXIMA+ Series Rotary Level Indicator BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS PLEASE
MINI-BEAM SM2A312FP. MINI-BEAM Plastic Fiber Optic. Output Type. Supply Voltage E X C E S S G A I N. SPST Solid-state 2-Wire V ac E X C E S S
MINI-BAM elf-contained AC-operated ensors for use with Banner Plastic Fiber Optics Compact, modulated, self-contained visible red fiber optic sensors for 24-24V ac 2-wire operation Useable in opposed and
Inductive sensor For rotary actuators NI4-DSU35TC-2Y1X2
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Powerful & homogeneous projector
Ideal for photostereo vision application Intense and homogeneous spot light Standard connections and fasteners Flexible: Adjustable working distance [50mm,2000mm] / Adjustable illuminated area [100mm²,1m²]
ASI Systems ML5740A Series
ML5740A Series Electric Linear Valve Actuators Non-Spring Return APPLICATION The ML5740A series actuators operate standard ASI Systems valves in heating, ventilating and air conditioning (HVAC) applications.
Control engineering information VARYCONTROL VAV Units VAV Compact flow rate controller BC0 BF0
Control engineering information VARYCONTROL VAV Units flow rate controller BC0 BF0 The art of handling air Contents 1 General information 3 Correct use 3 Materials 3 Maintenance 3 2 Field of application,
ASI Systems ML5720A Series
ML5720A Series Electric Linear Valve Actuators Non-Spring Return APPLICATION The ML5720A series actuators operate standard ASI Systems valves in heating, ventilating and air conditioning (HVAC) applications.
Inductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
MAXIMA + Series ROTARY LEVEL CONTROL
Price $5.00 MAXIMA + Series ROTARY LEVEL CONTROL OPERATING INSTRUCTIONS PLEASE READ CAREFULLY Division of Garner Industries 7201 North 98th Street Lincoln, NE 68507-9741 (402) 434-9102 925-0268 TABLE OF
GCX Mounting Assembly Installation Guide. Pedestal Mount for Philips IntelliVue MP5/20/30/40/50/60/70, MX400/450/500/550/600/700/800
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com GCX Mounting Assembly Installation Guide Pedestal Mount for Philips IntelliVue MP5/20/30/40/50/60/70, MX400/450/500/550/600/700/800
Magnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
HST -M1 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M1 Switching element with locking mechanism (Translation of Original Manual) HST-M1 Ident. No.: 10213 HST-M1 Ident. No.: 10219 HST-M1, pictured Ident.
BA505C 2-wire 4/20mA manual setpoint station Issue 6
BA505C 2-wire 4/20mA manual setpoint station Issue 6 Issue: 6 3 rd December 2010 2 CONTENTS 1. Description 2. Operation 3. Electrical Systems Design 3.1 4/20mA loop 3.2 Optional Backlights 3.2.1 Separately
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet Communicative damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 1 m² Nominal torque 5 Nm Nominal voltage AC/DC 24 V Control Modulating
Security at Fingertips.
Security at Fingertips www.esslsecurity.com Installation Guide SF1000 Version: 2.0 Date: May 2014 All design and specification declared are subject to change without notice in advance. I. Use Instructions
Inductive angle sensor with analog output Ri360P1-DSU35TC-ELi-Exi
ATEX category II 2 G, Ex Zone 1 ATEX category II 2 D, Ex Zone 21 Rectangular, housing DSU35 Plastic, PP-GF30-VO Detection of angular range 0 to 360 P1-Ri-QR14 positioning element included in delivery Measuring
AS7.P CF20 NPT DOCK AS7.P CF20 DPT DOCK AS7.P CF20 NPT DOCK WITH SCREEN LOCK AS7.P CF20 DPT DOCK WITH SCREEN LOCK AS7
AS7.P020.100 CF20 NPT DOCK AS7.P020.102 CF20 DPT DOCK AS7.P020.200 CF20 NPT DOCK WITH SCREEN LOCK AS7.P020.202 CF20 DPT DOCK WITH SCREEN LOCK AS7.P020.001 CF20 SCREEN LOCK ARM PANASONIC TOUGHBOOK CF20
Products no longer available
echnical data sheet NV4-MF(-) Modulating linear actuator for -way and 3-way globe valves Actuating force 1000 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position osition feedback feedbac
Quick Start Guide V5.1.
Quick Start Guide V5.1 1 Quick Start Guide Table of Content 1. Package Contents...1 2. Cautions... 1 3. System Requirements... 1 4. Hardware Overview... 2 4.1 Mini Dome Network Camera...2 4.2 IR Mini
lindab we simplify construction UltraLink Technical information
lindab we simplify construction UltraLink Technical information Content Introduction... 2 1. Monitor Overview... 3 Description... 3 Mounting... 4 Connections... 4 Power supply... 5 Display... 6 Status
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
Bondtech QR Installation guide for the BCN3D Sigma
Bondtech QR Installation guide for the BCN3D Sigma 1 Contents Introduction...3 List of tool required...3 Mechanical & Electrical Installation...4 Adjustment of steps/mm...12 2 Introduction This guide shows
Inductive Angle Sensor With Analog Output RI360P1-DSU35TC-ELI-EXI
ATEX category II 2 G, Ex Zone 1 ATEX category II 2 D, Ex Zone 21 Rectangular, housing DSU35 Plastic, PP-GF30-VO Detecting angular positions of 0 to 360 P1-Ri-DSU35 positioning element included in delivery
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NR24A-MOD Communicative rotary actuator for ball valves Nominal torque 10 Nm Nominal voltage AC/DC 24 V Conversion of sensor signals Communication via Modbus RU (RS-485) echnical data
SGD 24-M-IP Waterproof PanelPilot-Compatible Smart Graphics Display
Features 2.4 colour TFT screen IP-67 and NEMA 6 rated Rugged and scratch resistant Corning Gorilla Glass window Supplied with free Windows design software, to setup and customise the display. Compatible
Service: SLR Laboratory Stirrer glass made of ideas. Service Instructions for the SLR Laboratory Stirrer
Service Instructions for the SLR Laboratory Stirrer SLR Service eng.doc 17 Version: 03.04.2001 Contents Page Contents... 18 General way of proceeding... 19 1 Safety information... 20 2 Introduction...
FALCON High Flow. Circular ceiling air diffuser for supply air QUICK FACTS
Circular ceiling air diffuser for supply air QUICK FACTS Ceiling air diffuser for supply air in rooms with high ceiling Manual operated change of spread direction as standard Motor operated change of spread