Automotive Service Technician Foundation Program AST1 Trades Training. Program Outline

Transcription

1 Automotive Service Technician Foundation Program AST1 Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: November 2006 OUTLINE EFFECTIVE DATE: September 2017 PROGRAM OUTLINE REVIEW DATE: March 2022 GENERAL PROGRAM DESCRIPTION: This comprehensive 30 week Automotive Service Technician Foundation (pre-apprenticeship) program provides students with the skills, knowledge and training necessary to enter the automotive industry and covers the program competencies for Level 1 of the four year Automotive Service Technician Apprenticeship program. Emphasis is placed on the development of practical mechanical knowledge for preparation in the automotive industry. Content covered includes general automotive maintenance and practices, basic electrical systems, brake systems, steering systems and suspension systems, as well as using automotive tools and equipment. The program is taught through regular lectures and demonstrations, and students are given extensive practical training in a functioning automotive shop setting. Safe work habits are emphasized, reinforced and practiced throughout the program. Program Information: Upon successful completion of the 30 week Automotive Service Technician Foundation program, students receive: Level 1 Technical Training credit from Industry Training Authority of the 4 Level Automotive Service Technician Apprenticeship program 450 Work-based Training hours Certificate of Completion Automotive Service Technician (Industry Training Authority) College of the Rockies Certificate; Delivery: This program is delivered face-to-face as a block intake. Time for this program: 30 weeks Typical Structure of Instructional Hours: Practicum Hours (if applicable): Instructional Activity Duration Type of Practicum Duration Theory based training (approximately per day) Practical shop floor training (approximately per day) Trades Contact Hours 40% 60% On-the-job Experience Formal Work Experience Other Total N/A N/A N/A Total 28 hrs/wk 1

2 Program Outline Author or Contact: John White, AST IP Signature APPROVAL SIGNATURES: Department Head Joy Brown Dean of Trades and Technology Dr. Jack Moes Department Head Signature Dean Signature EDCO Valid from: September 2017 March 2022 Education Council Approval Date PROGRAM PREREQUISITES AND TRANSFER CREDIT: Prerequisites: Secondary school graduation or equivalent, or completion of a College of the Rockies assessment to an acceptable level. Recommended prerequisites: The following education is highly recommended for student success within the program: Flexible Assessment (FA): Apprenticeship and Workplace Math 11, Trades Mathematics 11, or equivalent English 12 Physics 11 or Science and Technology 11 Credit can be awarded for this program through FA Yes No Prior Leaning Credit: Student may apply for prior learning credit with the ITA (Industry Training Authority), please visit Prior Program Number: N/A Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 2

3 Textbooks and Required Resources: Textbook selection varies by instructor and may change from year to year. At the Program Outline Effective Date the following textbooks were in use: (most current edition) Automotive Technology, Jack Erjavec, 4th Edition (2015); (incl. Text, Tech. Manual) Delmar Nelson Canada TRAC Common Core Guides Line B (Math) H.D. Mechanics Basic Welding Line G 1 G11 Automotive Service Technician Competencies Line A1 A10 (complete set) Automotive Service Technician First Period Learning Guides (complete set) PROGRAM DESIGN: This program includes two kinds of courses: A. Industry Training Authority (ITA) courses cover the general area competencies (GAC) for the program as sourced from curriculum documents provided by ITA authority. The Technical Training Topics are listed under the Technical Training Content section of this document, and related competencies are listed under the Program Competencies section. College of the Rockies curriculum delivered under this category merits ITA accreditation. B. Workplace Health and Safety courses add considerable value to the program and can result in industry recognized certification. For a list of courses covered within program hours, see the Workplace Health and Safety Courses in this document. TECHNICAL TRAINING CONTENT: AMST 101 AMST 102 AMST 103 AMST 104 AMST 105 Perform Safety-Related Functions Maintain safe work environment Use personal protective equipment (PPE) and safety equipment Use Tools, Equipment and Documentation Use tools and equipment Use fasteners, tubing, hoses and fittings Use hoisting and lifting equipment Use technical information Use Communication and Mentoring Techniques Use communication techniques Diagnose and Repair Engine Systems Test and service lubrication and cooling systems Describe internal combustion engine principles Assess leaks Diagnose and Repair Driveline Systems Diagnose and repair drive shafts and axles Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 3

4 AMST 106 AMST 107 AMST 108 AMST 109 Diagnose and Repair Electrical Systems and Components Diagnose and repair basic wiring and electrical systems Diagnose and repair starting and charging systems and batteries Diagnose and Repair Steering and Suspension, Braking, Control Systems, Tires, Wheels, Hubs and Wheel Bearings Diagnose and repair steering and control systems Diagnose and repair suspension and control systems Diagnose and repair braking and control systems Diagnose and repair tires, wheels, hubs and wheel bearings Diagnose and Repair Restraint Systems, Body Components, Accessories and Trim Diagnose and repair wind noises, rattles and water leaks Diagnose and repair interior and exterior components, accessories and trim Diagnose and repair latches, locks and movable glass Diagnose and Repair Hybrid and Electric Vehicles (EV) Implement specific safety protocols for hybrid and electric vehicles (EV) PROGRAM COMPETENCIES: Upon the successful completion of this program, students will be able to apply safe work practices including WorkSafeBC, Occupational Health and Safety, Personal Protection Equipment, fire safety procedures and WHMIS; effectively and safely use hand tools, measuring tools, power tools, shop equipment; describe and demonstrate welding procedures including oxyacetylene components and procedures, gas metal arc welding components, methods and procedures; describe and use fasteners, tubings, fittings, drive belts; describe and use hoisting and lifting equipment safely; describe and use technical information; diagnose and repair drive shafts, basic wiring and electrical systems, starting and charging systems and batteries; diagnose and repair steering and suspension systems, braking, control systems, tires, wheels, hubs and wheel bearings; diagnose and repair restraint systems, body components, accessories and trim; and diagnose and repair hybrid electric vehicles. Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 4

5 WORKPLACE HEALTH AND SAFETY COURSES: Courses Approx. hours Assessment Occupational First Aid Level 1 (OFA-1: PVHE-100) 7 COM/NCG Workplace Hazardous Material Information System 4 COM/NCG (WHMIS: PVHE-700) Transportation of Dangerous Goods (TDG: PVHE-701) 4 COM/NCG Total hours: 15 COM Completed to defined standard > 70% NCG No Credit Granted < 70% EVALUATION AND ASSESSMENT: Assignments % Of Total Grade Practical Theory Total 60% 40% 100% The minimum passing mark to meet ITA (Industry Training Authority) standards is 70%. Students must maintain an acceptable level of attendance (as described in the College Policies and Procedures), complete all assigned projects and pass all exams with a minimum 70% to successfully complete the program. STUDENT RESPONSIBILITY: Students are expected to follow all College Policies and Practices as outlined in the program handout package. Regular attendance is encouraged for success in this program. Competency in the techniques and methods necessary to a given trade requires significant supervised practice. Students are expected to follow Policy "Vocational Student Withdrawals as a Result of Absence". WorkSafeBC regulations apply to all trades programs. Students are expected to behave accordingly. For shop activities students must have safety-toed footwear. This footwear must be worn at all times in the shop. Trades programs require that students own use and maintain proper eye safety wear and work clothes (coveralls). Safety procedures must be followed while working in the shop area. Students may only work in the shop during assigned lab times. If an incident occurs, no matter how minor, report it to the tool room attendant immediately. Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 5

6 INDUSTRY SITE VISITS: There may be off-site work practicums and field trips organized in the program as opportunity or resources are available during this program. Students ARE REQUIRED to supply their own transportation for practicums and field trips. Students are expected to follow all college policies and procedures when participating in off-campus activities. STUDENTS MUST PROVIDE THEIR OWN: Steel-toed Leather Work Boots Safety Glasses Coveralls and flame retardant work clothes Leather Welding Gloves Welding Goggles with #5 lens Required Texts (as listed on front page) Pens, pencils, three-ring binder Calculator Paper Digital multi meter with 10 MΩ impedence EXAM POLICY: Students must attend all required scheduled exams that make up a final grade at the appointed time and place. Individual instructors may accommodate for illness or personal crisis. Additional accommodation will not be made unless a written request is sent to and approved by the appropriate Department Head prior to the scheduled exam. Any student who misses a scheduled exam without approval will be given a grade of 0 for the exam. PROGRAM GRADE: Program grades are assigned as follows: COM Completed to defined standard 70% NCG No Credit Granted < 70% Successful completion of the in-school training for each level is defined as a final score of 70% or greater. (ITA website) ACADEMIC POLICIES: See for general college policies related to program activities, including grade appeals, cheating and plagiarism. Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 6

7 PROGRAM CHANGES: Information contained in program outlines is correct at the time of publication. Content of the programs is revised on an ongoing basis to ensure relevance to changing educational, employment, and marketing needs. The instructor will endeavour to provide notice of changes to students as soon as possible. The instructor reserves the right to add material from programs. Aug. 15, 2017 sk Z:\OUTLINE\2017_Fall\AST1.docx 7