Metrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers

Transcription

1 800 SECTION H

2 Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS calibration. CONTENTS Page Digital Calipers Digital calipers from Insize and Mahr including: integrated wireless calipers, special purpose calipers and universal calipers. 803 Depth Gauges Digital depth gauges. 810 Micrometers Outside micrometers, Indicating & comparator micrometers, Inside micrometers, Internal micrometers. 812 Height Gauges 1D & 2D height gauges. Available in dial & digital with 0.01 or resolution. 826 Indicators Dial indicators, Digital indicators, Dial & digital test indicators, Indicator stands & holders. 832 Comparators Dial and digital comparators from Mahr D Testers Dial and digital 3D testers for setting and zeroing workpieces. 853 Tool Sets Value measuring tool sets from 4-13pcs. 854 Edge Finders Basic to electronic edge finders. 855 Zero Setters Dial and electronic zero setters. 855 Gauges Granite Surface Plates & Stands Bore, Caliper, Thickness, Snap, Feeler, Taper & Radius Gauges, Gauges for internal and external measurement, Pin, Slip, Plain plug and ring gauges (setting rings), Thread gauges. 856 Available in grade 00, 0 & 1 from Mahr and Insize. Wide range of stands and cabinets. 876 V-Blocks & Parallels For inspection and machining. Available in magnetic, roller block, induction & granite. 877 Squares, Levels, Protractors Etc. Microscopes & Endoscopes Squares, Levels, Rules & straight edges, Combination square and Protractors 878 Basic to high end measuring microscopes. 884 Hardness Testers Portable and desktop digital, manual and automatic hardness testers from Insize. 888 Shore Durometers Dial and digital shore durometers and stands. 892 Tool Presetters High quality tool pre-setting from M.Conti. 894 Calibration Services Full range of UKAS calibration services. 896 Software MarCom measuring software. 897 BRANDS The German market leader in precision gauges. One of the fastest growing names in the world of metrology. High quality Italian tool pre-setters. High quality thread gauges, made in Germany. 801

3 CALIPERS introduction MarCal. The new Generation Waterproof digital calipers with the Reference-System and Integrated Wireless Lock Function Ergonomic Design IP 67 IP67 The digital caliper MarCal 16 EWRi Reference is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The handy non-slip thumb support of the MarCal 16 EWRi ensures even in contaminated working conditions trouble-free handling and therefore reliable measuring results. Due to the outstanding protection against dust and water the digital caliper MarCal 16 EWRi Reference delivers precise and secure results even in the most difficult workshop conditions. Zero-position is secured Operating error is not possible Actual size The high-contrast display with 11 high digits enables accurate, fatigue free reading of the measurement results. Code Initials IP International Protection First Digit 6 Dust-Tight Second Digit 7 Temporary Iersion in Water Integrated Wireless METROLOGY INTEGRATED Reference System All digital calipers with this logo are equipped with the innovative Reference-System. After setting the zero position it remains stored for all further measurements, you don't need to reset the zero position every time the caliper is switched on. Integrated Wireless is a new data transmission system from Mahr. Data acquisition with digital calipers is now even easier: Simply transmit your measured data directly into Microsoft Excel or via a keyboard code into any Windows program. With Integrated Wireless your data will be transferred from the caliper; this is confirmed with a message in the display to whether the data has been transferred correctly, and/or whether you are in the reception range of the i-stick. Superior Quality Guide Ways Only MarCal calipers have machinelapped guide way surfaces, these guarantee an even and sensitive run of the slide. Additionally, the service life of the caliper increases compared to a ground guide way due to the greater contact area on the guide way surface. Battery life Surface of the guide way Reference-System + 50% Conventional 1 Year 2 Years 3 Years The new Reference system is extremely energy efficient as when the caliper is in standby mode; almost no power is required, which extends the battery life by up to 50%. Lapped guide way Competitor A Ground guide way Competitor B Ground guide way Phone us 8am-6pm for next day delivery

4 DIGITAL CALIPERS Mahr digital calipers MARCAL DIGITAL CALIPER Integrated Wireless & IP67 Waterproof Series 16 EWRi IP67 INTEGRATED FUNCTIONS Resolution Error Limit G Depth Bar Thumb (inch) /inch /inch Wheel Round Flat 150 (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (12") 0.01/.0005" 0.04/.0015" (12") 0.01/.0005" 0.04/.0015" ON/OFF RESET (Set display to zero) /inch PRESET (for entering a numerical value) Reference-Lock/Unlock Hold DATA Auto-ON/OFF FEATURES Integrated Wireless data transmission Iediate measurement due to the Reference system Excellent resistance against dust, coolants and lubricants, protection class IP67 Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 11 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT ACCESSORIES MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) i-stick WIRELESS RECIEVER Includes MarCom Standard Software: BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: D TESTERS MARCAL DIGITAL CALIPER IP67 Waterproof & Data Output (Optional) Series 16 EWR IP67 USB RS232C Digimatic MEASURING TOOL SETS EDGE FINDERS Resolution Error Limit G Depth Bar Thumb (inch) /inch /inch Wheel Data Round Flat 150 (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (12") 0.01/.0005" 0.04/.0015" (12") 0.01/.0005" 0.04/.0015" FUNCTIONS ON/OFF RESET (Set display to zero) /inch PRESET (for entering a numerical value) Reference-Lock/Unlock Hold DATA Auto-ON/OFF FEATURES Iediate measurement due to the Reference system Data output via USB, OPTO RS232C or Digimatic, optional cable required Excellent resistance against dust, coolants and lubricants, protection class IP67 Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 8.5 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: CALIBRATION SERVICES SOFTWARE For full dimensions please visit Enter the in the search box and click the technical tab within the product page sales@cutwel.net Order Online 24/7 803

5 CALIPERS Mahr digital calipers MARCAL DIGITAL CALIPER Without Data Output Series 16 ER Resolution Error Limit G Depth Bar Thumb (inch) /inch /inch Wheel Round Flat 150 (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" FUNCTIONS ON/OFF RESET (Set display to zero) /inch Reference-Lock/Unlock Auto-ON/OFF FEATURES Iediate measurement due to the Reference system Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 11 high digits MachineMachine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions ACCESSORIES BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: MARCAL DIGITAL CALIPER With Data Output Series 16 ER IP67 USB RS232C Digimatic FUNCTIONS ON/OFF RESET (Set display to zero) /inch Reference-Lock/Unlock DATA Auto-ON/OFF METROLOGY Resolution Error Limit G Depth Bar Thumb (inch) /inch /inch Wheel Round Flat 150 (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" (12") 0.01/.0005" 0.04/.0015" (12") 0.01/.0005" 0.04/.0015" FEATURES Iediate measurement due to the Reference system Data output via USB, OPTO RS232C or Digimatic, optional cable required Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 8.5 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: For full dimensions please visit Enter the in the search box and click the technical tab within the product page Phone us 8am-6pm for next day delivery

6 DIGITAL CALIPERS Insize digital calipers INSIZE DIGITAL CALIPER IP67 Waterproof Series 1118-B IP67 ABS FUNCTIONS (inch) Resolution /inch Error Limit G /inch Thumb Wheel 150 (6") 0.01/.0005" 0.03/.001" BW 150 (6") 0.01/.0005" 0.03/.001" B 200 (8") 0.01/.0005" 0.03/.001" BW 200 (8") 0.01/.0005" 0.03/.001" B 300 (12") 0.01/.0005" 0.03/.001" BW 300 (12") 0.01/.0005" 0.03/.001" B ON/OFF SET (Set display to zero) /inch ABS/REL Hold FEATURES Excellent resistance against dust, coolants and lubricants, protection class IP67 Stainless steel Locking screw Supplied with: Case, battery, instructions, manufacturers calibration certificate DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT INSIZE DIGITAL CALIPER With Data Output Series 1108 USB RS232 3D TESTERS MEASURING TOOL SETS FUNCTIONS EDGE FINDERS (inch) Resolution /inch Error Limit G /inch Thumb Wheel 150 (6") 0.01/.0005" 0.03/.001" W 150 (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" W 200 (8") 0.01/.0005" 0.03/.001" (12") 0.01/.0005" 0.03/.001" W 300 (12") 0.01/.0005" 0.03/.001" ON/OFF /inch Auto-ON/OFF FEATURES Data output via USB or RS232C, optional cable required Stainless steel Locking screw Supplied with: Case, battery, instructions, manufacturers calibration certificate ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS INSIZE DIGITAL CALIPER With Carbide Tipped Jaws & Data Output Series 1110 USB RS232 INSIZE DIGITAL CALIPER With Ceramic Tipped Jaws & Data Output Series 1193 USB RS232 SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 series above Thumb Wheel 150 (6") 0.01/.0005" 0.03/.001" AW 150 (6") 0.01/.0005" 0.03/.001" A 200 (8") 0.01/.0005" 0.03/.001" AW 200 (8") 0.01/.0005" 0.03/.001" A 300 (12") 0.01/.0005" 0.03/.001" AW 300 (12") 0.01/.0005" 0.03/.001" A (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 series above Thumb Wheel 150 (6") 0.01/.0005" 0.03/.001" W 150 (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.03/.001" W 200 (8") 0.01/.0005" 0.03/.001" (12") 0.01/.0005" 0.03/.001" W 300 (12") 0.01/.0005" 0.03/.001" TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 805

7 CALIPERS special purpose digital calipers MARCAL DIGITAL GROOVE CALIPER With inwardly angled anvils Series 16 EWR-SA MARCAL DIGITAL GROOVE CALIPER With inwardly angled jaws Series 16 EWR-AA IP67 USB RS232C Digimatic IP67 USB RS232C Digimatic (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 16 EWR (page 803) Data 150 (6") 0.01/.0005" 0.03/.001" (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 16 EWR (page 803) Data 150 (6") 0.01/.0005" 0.03/.001" DIGITAL OUTSIDE GROOVE CALIPER For grooves & recesses Series 1187 DIGITAL OUTSIDE POINT CALIPER For wall thickness inside bores & recesses Series 1185 USB RS232 USB RS232 (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 (page 805) Data 150 (6") 0.01/.0005" 0.03/.001" A (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 (page 805) Data 150 (6") 0.01/.0005" 0.03/.001" A MARCAL DIGITAL OFFSET CALIPER Scribing & Marking Caliper Series 16 EWR-AR MARCAL DIGITAL KEYSEAT CALIPER For Keyseats Series 16 EWR-NA IP67 USB RS232C Digimatic With Carbide Faces Offset by 7 IP67 USB RS232C Digimatic With 0.5 Wide Blades METROLOGY FUNCTIONS & FEATURES same as 16 EWR (page 803) FUNCTIONS & FEATURES same as 16 EWR (page 803) (inch) Resolution /inch Error Limit G /inch Data 200 (8") 0.01/.0005" 0.03/.001" (inch) Resolution /inch Error Limit G /inch Data 150 (6") 0.01/.0005" 0.03/.001" For full dimensions please visit Enter the in the search box and click the technical tab within the product page Phone us 8am-6pm for next day delivery

8 DIGITAL CALIPERS special purpose digital calipers MARCAL INSIDE GROOVE CALIPER For grooves & recesses Series 16 EWR-SI MARCAL DIGITAL GROOVE CALIPER With outwardly angled jaws Series 16 EWR-AI IP67 USB RS232C Digimatic IP67 USB RS232C Digimatic (inch) Resolution /inch Error Limit G /inch Data (.8-6.7") 0.01/.0005" 0.03/.001" INSIDE GROOVE CALIPER For grooves & recesses Series 1120 FUNCTIONS & FEATURES same as 16 EWR (page 803) (inch) Resolution /inch Error Limit G /inch Data (.4-6.3") 0.01/.0005" 0.03/.001" DIGITAL INSIDE POINT CALIPER For measuring groove diameter inside bores & recesses Series 1121 FUNCTIONS & FEATURES same as 16 EWR (page 803) DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT USB RS232 USB RS232 3D TESTERS MEASURING TOOL SETS Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 (page 805) MARCAL DIGITAL POINT CALIPER For Groove Widths Series 16 EWR-S Data /.0005" 0.04/.0015" A Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 1108 (page 805) Data /.0005" 0.04/.0015" A MARCAL DIGITAL POINT CALIPER For Groove Widths Series 16 EWR-SM EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS IP67 USB RS232C Digimatic IP67 USB RS232C Digimatic With 10 x 2 Pointed Jaws SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 16 EWR (page 803) Data 150 (6") 0.01/.0005" 0.03/.001" (inch) Resolution /inch Error Limit G /inch FUNCTIONS & FEATURES same as 16 EWR (page 803) Data 150 (6") 0.01/.0005" 0.03/.001" TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE For full dimensions please visit Enter the in the search box and click the technical tab within the product page sales@cutwel.net Order Online 24/7 807

9 CALIPERS RTJ groove & universal digital calipers DIGITAL RTJ GROOVE CALIPER For RTJ Grooves with 23 angle SERIES 1179 USB RS232 (inside dia. of RTJ ring groove) (inch) (outside dia. of RTJ ring groove) (inch) Angle of RTJ ring groove Error Limit G (inch) (0.4-12") (1-12") (.0015") (0.4-24") (1-24") (.002") FUNCTIONS ON/OFF /inch Auto-ON/OFF Preset FEATURES For measuring RTJ ring grooves Data output via USB or RS232C, optional cable required Stainless steel Locking screw Supplied with: Case, battery, instructions, manufacturers calibration certificate MARCAL UNIVERSAL DIGITAL CALIPER SET Standard Set includes accessories for 4 types of measurement Series 16 EWV IP67 USB RS232C Digimatic METROLOGY (inch) Resolution (inch) Error Limit G (inch) Data 200 (8") 0.01 (.0005") 0.03 (.001") ACCESSORIES (included in set) 1 X DEPTH MEASURING BRIDGE: X SETTING GAGE for inside measurement: X MEASURING FORCE DEVICE: X ANVILS for outside measurements: X ANVILS for outside measurements: X ANVILS for outside measurements: X ANVILS for inside measurement: X ANVILS for inside measurement: X ANVILS for inside measurement: X SCREWS M2 x 8: ACCESSORIES (optional) DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: FUNCTIONS ON/OFF RESET (Set display to zero) /inch PRESET (for entering a numerical value) Reference-Lock/Unlock Hold DATA Auto-ON/OFF FEATURES Iediate measurement due to the Reference system Data output via USB, OPTO RS232C or Digimatic, optional cable required Excellent resistance against dust, coolants and lubricants, protection class IP67 Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 8.5 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions Phone us 8am-6pm for next day delivery

10 DIGITAL CALIPERS large range purpose digital calipers INSIZE DIGITAL CALIPER With Long Jaws Series 1106, 1136 & 1117 ABS USB RS232 Figure 1 Figure 3 DIGITAL CALIPERS DEPTH Figure 2 MICROMETERS (inch) Jaw Length Resolution (inch) Error Limit G Figure 500 (20") (.0005") (40") (.0005") (60") (.0005") (80") (.0005") (20") (.0005") (40") (.0005") (20") (.0005") (40") (.0005") FUNCTIONS ON/OFF ABS /inch Auto-ON/OFF FEATURES Data output via USB or RS232C, optional cable required Absolute and incremental measurement Stainless steel Locking screw Supplied with: Case, battery, instructions, manufacturers calibration certificate HEIGHT 3D TESTERS MEASURING TOOL SETS MARCAL DIGITAL CALIPER With Long Jaws Series 18 EWR IP67 USB RS232C Digimatic EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Figure 1 Figure 2 SQUARES, LEVELS & PROTRACTORS (inch) Jaw Length Resolution (inch) Error Limit G Figure 300 (12") (.0005") (20") (.0005") (30") (.0005") (40") (.0005") (12") (.0005") (20") (.0005") (30") (.0005") (40") (.0005") ACCESSORIES (optional) DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: DEPTH BRIDGE 16Em: FUNCTIONS ON/OFF RESET (Set display to zero) /inch Reference-Lock/Unlock Preset DATA Auto-ON/OFF FEATURES Iediate measurement due to the Reference system Data output via USB, OPTO RS232C or Digimatic, optional cable required Excellent resistance against dust, coolants and lubricants, protection class IP65 Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 12.5 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 809

11 DIGITAL DEPTH Mahr digital depth gauges MARCAL DIGITAL DEPTH GAUGE For depth and distance measurement with integrated wireless data output Series 30 EWRI IP67 USB RS232C Digimatic INTEGRATED Functions Depth Measurement 200/300 (inch) 30 EXm Resolution /inch Distance Measurement 30 ESa Error Limit G /inch 150 (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.04/.0015" (12") 0.01/.0005" 0.05/.00175" ø ø1.5 R2 ø4 ON/OFF RESET (Set display to zero) /inch Data Hold Reference-Lock/Unlock Auto-ON/OFF Integrated wireless data transmission Excellent resistance against dust, coolants and lubricants, protection class IP67 Iediate measurement due to the Reference system Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 11 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions ACCESSORIES MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) i-stick WIRELESS RECIEVER Includes MarCom Standard Software: BATTERY 3V, Type CR2032: ANVIL FOR DISTANCE MEASUREMENT 30 ESA: CROSS BEAM EXTENSION EXm: EXm: MARCAL DIGITAL DEPTH GAUGE For depth and distance measurement with data output Series 30 EWR IP67 USB RS232C Digimatic Functions METROLOGY Depth Measurement 200/300 (inch) 30 EXm Resolution /inch Distance Measurement 30 ESa Error Limit G /inch 150 (6") 0.01/.0005" 0.03/.001" (8") 0.01/.0005" 0.04/.0015" (12") 0.01/.0005" 0.05/.00175" ø ø1.5 R2 ø4 ON/OFF RESET (Set display to zero) /inch Data Hold Reference-Lock/Unlock Auto-ON/OFF Data output via USB, OPTO RS232C or Digimatic, optional cable required Excellent resistance against dust, coolants and lubricants, protection class IP67 Iediate measurement due to the Reference system Dirt wipers are integrated in the slide Life of the battery up to 3 years High contrast LCD with 8.5 high digits Machine lapped guide way Slide and beam made of hardened stainless steel Step measuring function Locking screw Supplied with: Case, battery, instructions ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: ANVIL FOR DISTANCE MEASUREMENT 30 ESA: CROSS BEAM EXTENSION EXm: EXm: Phone us 8am-6pm for next day delivery

12 DIGITAL DEPTH Insize digital depth gauges WATERPROOF DIGITAL DEPTH GAUGE IP67 Waterproof Series 1149 DIGITAL DEPTH GAUGE With Data Output Series 1141 IP67 USB RS232 DIGITAL CALIPERS a d (inch) Resolution /inch Error Limit G d FUNCTIONS & FEATURES same as 1118 (page 805) a 150 (6") 0.01/.0005" A 200 (8") 0.01/.0005" A 300 (12") 0.01/.0005" A a d (inch) Resolution /inch Error Limit G FUNCTIONS & FEATURES same as 1108 (page 805) d a 150 (6") 0.01/.0005" A 200 (8") 0.01/.0005" A 300 (12") 0.01/.0005" A DEPTH MICROMETERS HEIGHT DIGITAL DEPTH GAUGE With 6 extension rods Series 2141 ABS USB RS232 DIGITAL DOUBLE HOOK DEPTH GAUGE With Data Output Series 1144 USB RS232 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS Functions L MICROSCOPES & ENDOSCOPES ON/OFF ABS /inch Auto-ON/OFF Preset Change measuring direction Data output via USB or RS232C, optional cable required Absolute and incremental measurement Stainless steel Locking screw Supplied with: Case, battery, instructions, extension rods: 12.5, 25, 50, 75 x 1 & 100 x 2, pointed tip and ball tip (inch) Resolution /inch Error Limit G Stroke (inch) 300 (12") 0.01/.0005" (.5") A 300 (12") 0.01/.0005" (.5") A d (inch) Resolution /inch Error Limit G 14.5 FUNCTIONS & FEATURES same as 1108 (page 805) L d 150 (6") 0.01/.0005" A 200 (8") 0.01/.0005" A 300 (12") 0.01/.0005" A HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 811

13 MICROMETERS introduction Micromar. Digital Micrometers The digital waterproof Micrometer Micromar 40 EWR. Even in the most difficult conditions precise and reliable results are obtained. Lock function Ergonomic Design IP 65 Micromar. Digital Micrometers are equipped with a LOCK function. With this lock key the zero position is secured and operating error is avoided. The ergonomically formed and thermally insulated handle as well as the integrated ratchet in the thimble ensures both trouble free handling and accurate measurement results. IP65 Protection class IP65 in accordance to IEC 60529, the water proof measuring system FPS (Fluid Protected measuring System) with a sealed housing. Zero-position is secured Operating error is not possible Code Initials IP International Protection First Digit 6 Dust-Tight Second Digit 5 Powerful Water Jets High-contrast display: With 8.5 high digits for accurate, fatigue free reading of the measurement results. Stainless steel, hardened spindle ABS Absolute-Function: Micrometer can be set in any position to /.0000" without the reference to the Preset value being lost METROLOGY Sturdy hard lacquered steel frame Reference System All digital micrometers with this logo are equipped with the innovative Reference-System. After setting the zero position it remains stored for all further measurements, you don't need to reset the zero position every time the micrometer is switched on. Optional Universal SPC-interface You have the choice to output data to USB, Digimatic or Opto RS232 USB RS232C Digimatic Battery life Reference-System + 50% Conventional 1 Year 2 Years 3 Years The new Reference system is extremely energy efficient as when the micrometer is in standby mode; almost no power is required, which extends the battery life by up to 50% Phone us 8am-6pm for next day delivery

14 MICROMETERS Mahr digital micrometers MICROMAR DIGITAL MICROMETER IP65 Waterproof with Data Output Series 40 EWR ABS IP65 USB RS232C Digimatic Functions (inch) Resolution /inch Error Limit G Spindle Thread Pitch 0-25 (0-1") 0.001/.00005" (1-2") 0.001/.00005" (2-3") 0.001/.00005" (3-4") 0.001/.00005" (4-5") 0.001/.00005" (5-6") 0.001/.00005" (6-7") 0.001/.00005" (7-8") 0.001/.00005" RESET (Set display to zero) ABS /inch PRESET (for entering a numerical value) Reference-Lock/Unlock Hold DATA Data output via USB, OPTO RS232C or Digimatic, optional cable required Iediate measurement due to the Reference system Excellent resistance against dust, coolants and lubricants, protection class IP65 Carbide tipped anvil and spindle Life of the battery up to 3 years High contrast LCD with 8.5 high digits Hardened stainless steel spindle, fully ground Hard lacquered steel frame, heat insulated Ratchet integrated into the spindle Supplied with: Case, battery, instructions DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: BATTERY 3V, Type CR2032: MEASURING TOOL SETS EDGE FINDERS MICROMAR DIGITAL MICROMETER IP65 Waterproof no Data Output Series 40 EWR MICROMAR DIGITAL MICROMETER SET IP65 Waterproof with Data Output Series 40 EWR ZERO SETTERS IP65 ABS ABS IP65 USB RS232C Digimatic 4pc Set Supplied with setting standards 50, 75 & 100 GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES FUNCTIONS & FEATURES same as 40 EWR above but no data output ACCESSORIES same as 40 EWR above SOFTWARE (inch) Resolution /inch Error Limit G Spindle Thread Pitch (inch) Resolution /inch Error Limit G Spindle Thread Pitch 0-25 (0-1") 0.001/.00005" (0-4") 0.001/.00005" sales@cutwel.net Order Online 24/7 813

15 MICROMETERS Mahr digital outside micrometers MICROMAR DIGITAL MICROMETER IP52 Waterproof with Sliding Spindle Series 40 EWS MICROMAR DIGITAL MICROMETER IP40 no Data Output Series 40 ER ABS IP52 USB RS232C Digimatic IP40 ABS FUNCTIONS & FEATURES same as 40 EWR (page 813) but IP 52 FUNCTIONS & FEATURES same as 40 EWR (page 813) but IP 40 and no data output (inch) Resolution /inch Error Limit G Spindle Thread Pitch (inch) Resolution /inch Error Limit G Spindle Thread Pitch 0-25 (0-1") 0.001/.00005" (0-1") 0.001/.00005" MICROMAR UNIVERSAL DIGITAL MICROMETER IP52 Waterproof with Sliding Spindle Series 40 EWR ABS IP65 USB RS232C Digimatic anvils in the set METROLOGY Also available, Metric, Whitworth & UN measuring anvils on request. (inch) Resolution /inch Error Limit G Spindle Thread Pitch 0-25 (0-1") 0.001/.00005" ACCESSORIES (included in set) Qty Flat anvils (reference) Flat anvils (sensitive) Anvils with reduced measuring faces (reference) Anvils with reduced measuring faces (sensitive) Disc Type anvils (reference) Disc Type anvils (sensitive) Anvils with spherical measuring faces Conical shaped anvil Wedge shaped anvil (blade) Screws M2 x Functions RESET (Set display to zero) ABS /inch PRESET (for entering a numerical value) Reference-Lock/Unlock Hold DATA Mounting bore for interchangable anvils Data output via USB, OPTO RS232C or Digimatic, optional cable required Iediate measurement due to the Reference system Resistance against dust, coolants and lubricants, protection class IP52 Carbide tipped anvil and spindle Life of the battery up to 3 years High contrast LCD with 8.5 high digits Hardened stainless steel spindle, fully ground Hard lacquered steel frame, heat insulated Ratchet integrated into the spindle Supplied with: Case, battery, instructions Phone us 8am-6pm for next day delivery

16 MICROMETERS Insize digital outside micrometers DIGITAL MICROMETER IP65 Waterproof with Data Output Series 3101 IP65 ABS USB RS232 DIGITAL CALIPERS (inch) Resolution /inch Error Limit G 0-25 (0-1") 0.001/.00005" A (1-2") 0.001/.00005" A (2-3") 0.001/.00005" A (3-4") 0.001/.00005" A (4-5") 0.001/.00005" A (5-6") 0.001/.00005" A (6-7") 0.001/.00005" A (7-8") 0.001/.00005" A (8-9") 0.001/.00005" A (9-10") 0.001/.00005" A (10-11") 0.001/.00005" A (11-12") 0.001/.00005" A Functions On/Off SET ABS/INC /inch DATA Data output via USB or RS232C, optional cable required Excellennt resistance against dust, coolants and lubricants, protection class IP65 Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions, setting standards, spherical anvils and manufacturers calibration certificate DEPTH MICROMETERS HEIGHT 3D TESTERS METRIC DIGITAL MICROMETER IP54 Waterproof Series 3108 IP54 ABS ABS DIGITAL MICROMETER Basic Model Series 3109 MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Functions On/Off SET ABS/INC Resistance against dust, coolants and lubricants, protection class IP54 Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions, setting standards, spherical anvils and manufacturers calibration certificate Functions On/Off SET ABS/INC /inch Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions, setting standards, spherical anvils and manufacturers calibration certificate GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS Resolution Error Limit G A A (inch) Resolution /inch Error Limit G 0-25 (0-1") 0.001/.00005" A (1-2") 0.001/.00005" A TOOL PRESETTERS CALIBRATION SERVICES A A (2-3") 0.001/.00005" A (3-4") 0.001/.00005" A SOFTWARE A A A A sales@cutwel.net Order Online 24/7 815

17 MICROMETERS Insize outside micrometers OUTSIDE MICROMETER Series 3203 & 3210 Available in 0.01 or graduations Supplied with setting standard (except 0-25) OUTSIDE MICROMETER 3206 With Interchangeable Anvils Series graduations Supplied with setting standard Interchangeable Anvils for measuring different ranges Graduation Error Limit G SERIES A A A A SERIES A A A A A A A A A A A A OUTSIDE MICROMETER SET 3203 & 3210 Supplied in a box Graduation qty Micrometers Included A, A, A A Type A Graduation Type B Error Limit G Type A A A A A A A A A A A A A A B B B B B B B METROLOGY A, A, A, A A, A, A, A, A, A A, A, A A, A, A, A A, A, A, A, A, A A A A A A MICROMETER STAND Series 6300 Suitable for micrometers upto A, A, A, A, A, A A A, A, A, A, A, A, A, A, A, A, A, A A Size L x H 116 x Phone us 8am-6pm for next day delivery

18 MICROMETERS Insize outside micrometers DIGITAL OUTSIDE MICROMETER WITH INTERCHANGEABLE ANVILS IP54 Waterproof Series 3506 IP54 ABS USB RS232 Type A Type B Interchangeable Anvils for measuring different ranges DIGITAL CALIPERS DEPTH (inch) Graduation /inch Error Limit G Type (0-4") 0.001/0.0001" A A (0-6") 0.001/0.0001" A A (6-12") 0.001/0.0001" A A (8-12") 0.001/0.0001" A A (12-16") 0.001/0.0001" B A (16-20") 0.001/0.0001" B A (20-24") 0.001/0.0001" B A (24-28") 0.001/0.0001" B A (28-32") 0.001/0.0001" B A (32-36") 0.001/0.0001" B A (36-40") 0.001/0.0001" B A POINT MICROMETER 3230 With 15 or 30 Points Series 3230 Supplied with setting standard (except 25) For measuring small grooves and key ways BLADE MICROMETER 3232 Series 3232 Functions On/Off SET ABS/INC /inch DATA Supplied with setting standard (except 25) For measuring groove diameter or shafts and keyways Data output via USB or RS232C, optional cable required Resistance against dust, coolants and lubricants, protection class IP54 Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions, setting standards and spherical anvils MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES 30 0,75 6,5 0,4 3,5 HARDNESS TESTERS 6 6 SHORE DUROMETERS Type A Type Type B Error Limit G 0-25 A A A A A A A A 0-25 B BA B BA B BA B BA Type A (inch) Type Type B Error Limit G 0-25 A A A A A A A A A A A A A A 0-25 B BA B BA TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 817

19 MICROMETERS Insize screw thread micrometers DIGITAL SCREW THREAD MICROMETER Measure Pitch Diameter of Screw Threads Series 3581 ABS USB RS232 Supplied with 60 setting standards Functions (inch) Resolution /inch Error Limit G Head/Tips 0-25 (0-1") 0.001/.00005" 0.004/ A (1-2") 0.001/.00005" 0.004/ A (2-3") 0.001/.00005" 0.005/ A (3-4") 0.001/.00005" 0.005/ A On/Off SET ABS/INC /inch DATA Data output via USB or RS232C, optional cable required Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions, 60 setting standards. SCREW THREAD MICROMETER Measure Pitch Diameter of Screw Threads Series 3281 METRIC/UN 60 MEASURING TIPS for 3281/3581 Micrometers Supplied with 60 setting standards Pitch / 64-48TPI 7381-T / 44-28TPI 7381-T / 24-14TPI 7381-T13 2-3/ 13-9TPI 7381-T / 8-5TPI 7381-T / TPI 7381-T16 6 pairs/set, including all above tips 7381-TS METROLOGY (inch) Graduation /inch Error Limit G Head/Tips WHITWORTH 55 MEASURING TIPS for 3281/3581 Micrometers Pitch 60-48TPI 7381-T TPI 7381-T TPI 7381-T / A 32-24TPI 7381-T / A 24-18TPI 7381-T / A 18-14TPI 7381-T / A 14-10TPI 7381-T / A 10-7TPI 7381-T / A 7-4.5TPI 7381-T / A TPI 7381-T / A 10 pairs/set, including all above tips 7381-T2S Phone us 8am-6pm for next day delivery

20 MICROMETERS Comparator & indicating micrometers MICROMAR MICROMETER WITH DIAL COMPARATOR With Integrated Dial Comparator Series 40 T For rapid measurements of cylindrical parts For rapid measurements of thickness, width, length DIGITAL CALIPERS Rugged steel frame, heat insulated and chrome plated (up to measuring range ) Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance Supplied with: Dial Comparator 1003 Retraction MICROMETER DIAL COMPARATOR Force Readings Error Limit G Readings Error Limit G N DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS INDICATING MICROMETER With Integrated Dial Comparator Series 3333 MICROMAR INDICATING MICROMETER With Integrated Dial Comparator Series 40 F EDGE FINDERS For rapid measurements of cylindrical parts For rapid measurements of thickness, width, length For rapid measurements of cylindrical parts For rapid measurements of thickness, width, length ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES MICROMETER Grad. Error Limit G DIAL INDICATOR Grad. Error Limit G ± MICROMETER Grad. Error Limit G DIAL INDICATOR Grad. Error Limit G HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Need advice? Our tech team is here to help Call sales@cutwel.net Order Online 24/7 819

21 MICROMETERS Insize inside micrometers DIGITAL INSIDE MICROMETER IP54 waterproof Series 3520 ABS USB RS232 Ø2 Ø2 R Ø (inch) Resolution /inch Error Limit G Type 5-30 ( ) 0.001/ A (1-2) 0.001/ B ( 2-3) 0.001/ B (3-4) 0.001/ C INSIDE MICROMETER With carbide measuring faces Series 3220 R Ø Type A Type B R Ø2 Ø Type C Functions On/Off SET ABS/INC /inch DATA Data output via USB or RS232C, optional cable required Carbide tipped measuring faces Ratchet stop type Supplied with: Case, battery, instructions Type A Type B R METROLOGY 5 Graduation Error Limit G Type C Type A B B C C C C C C C C C Phone us 8am-6pm for next day delivery

22 MICROMETERS Insize tubular inside micrometers TUBULAR INSIDE MICROMETER Series 3221 TUBULAR INSIDE MICROMETER Series Graduation 25-1, Graduation 50-1,500 supplied with setting standards Ø9 Ø8 Ø18 SR8 M12 1 SR8 DIGITAL CALIPERS DEPTH MICROMETERS Travel of Micrometer Head Extension Rods Travel of Micrometer Head Extension Rods HEIGHT pcs , 25, pcs pcs pcs pcs , 25, 50(2pcs), , 25, 50(2pcs), 100, , 25, 50, 100, 150, , 25, 50(2pcs), 100, 200(2pcs), , 25, 50(2pcs), 100, 200(3pcs), 300(2pcs) D TESTERS MEASURING TOOL SETS EDGE FINDERS TUBULAR INSIDE MICROMETER Series 3225 TUBULAR INSIDE MICROMETER Series 3224 ZERO SETTERS 0.01 Graduation 100-2, Graduation 1,000-5,000 GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS Travel of Micrometer Head Extension Rods Travel of Micrometer Head Extension Rods SHORE DUROMETERS , 100(2pcs), 200, TOOL PRESETTERS , 50, 100, , 50, 100, 200, , 100(2pcs), 200, 500, CALIBRATION SERVICES , 50, 100, 200, 400(2pcs) 25, 50, 100, 200, 400(3pcs) 25, 50, 100, 200, 400(4pcs) , 100(2pcs), 200, 500, 1000(2pcs) 50, 100(2pcs), 200, 500, 1000(3pcs) SOFTWARE sales@cutwel.net Order Online 24/7 821

23 MICROMETERS Mahr 3 point internal micrometers DIGITAL SELF CENTERING 3 POINT INTERNAL BORE MICROMETER IP52 Waterproof Series 44 EWR ABS IP52 USB RS232C Digimatic (inch) Depth Resolution /inch Error Limit G* 6-8 ( ") 58 / (133**) /.00005" ( ") 58 / (133**) /.00005" ( ") 58 / (133**) /.00005" ( ") 64 / (139**) /.00005" ( ") 64 / (139**) /.00005" (.775-1") 68 / (218**) /.00005" (1-1.2") 68 / (218**) /.00005" ( ") 76 / (226**) /.00005" (1.6-2") 76 / (226**) /.00005" (2-2.35") 79 / (229**) /.00005" ( ") 79 / (229**) /.00005" ( ") 97 / (247**) /.00005" (3.35-4") 97 / (247**) /.00005" (4-4.9") 132 / (282**) /.00005" ( ") 132 / (282**) /.00005" ( ") 132 / (282**) /.00005" ( ") 132 / (282**) /.00005" Functions 0 (Set display to zero for relative measurement) ABS /inch ABS (switch between relative and absolute) Reference-Lock/Unlock DATA Modular system (consists of interchangeable measuring head 44Ak & basic unit 44 EXg). Data output via USB, OPTO RS232C or Digimatic, optional cable required Iediate measurement due to the Reference system Resistance against dust, coolants and lubricants, protection class IP52 Carbide tipped anvils (from 12) Measure the bottom of a bore (from 12 dia) >40 made from aluminium to save weight Life of the battery up to 3 years Supplied with: Case, battery, instructions * Over the full length of the anvils **With extension 44 Av DIGITAL SELF CENTERING 3 POINT INTERNAL BORE MICROMETER SET Series 44 EWR ABS IP52 USB RS232C Digimatic Set includes: 1 basic unit, measuring heads, case and setting rings MEASURING HEAD for 44 EWR & 844 A Series 44 AK METROLOGY (inch) Number of Heads 44 Ak Ring Gauges 6-12 ( ") 3 8/ ( ") (.775" - 2") 4 25/ (2-4") 4 60/ (inch) 6-8 ( ") ( ") ( ") ( ") ( ") (.775-1") (1-1.2") ( ") (1.6-2") (2-2.35") ( ") ( ") (3.35-4") (4-4.9") ( ") ( ") ( ") Phone us 8am-6pm for next day delivery

24 MICROMETERS Mahr 3 point internal pistol micrometers SELF CENTERING 3 POINT INTERNAL BORE PISTOL Excludes indicator Series 844 A DIGITAL CALIPERS (inch) Depth Error Limit G* 6-8 ( ") 58 / (133**) ( ") 58 / (133**) ( ") 58 / (133**) ( ") 64 / (139**) ( ") 64 / (139**) (.775-1") 68 / (218**) (1-1.2") 68 / (218**) ( ") 76 / (226**) (1.6-2") 76 / (226**) (2-2.35") 79 / (229**) ( ") 79 / (229**) ( ") 97 / (247**) (3.35-4") 97 / (247**) (4-4.9") 132 / (282**) ( ") 132 / (282**) ( ") 132 / (282**) ( ") 132 / (282**) Modular system (consists of interchangeable measuring head 44Ak & basic unit 844 Ag). Data output via USB, OPTO RS232C or Digimatic, optional cable required or wireless (depending on indicator used) Carbide tipped anvils (from 12) Measure the bottom of a bore (from 12 dia) >40 made from aluminium to save weight Supplied with: Case, battery, instructions Compatible Indicators Any indicator with an 8 shank can be used, however we recoend that you use either: 1086 Ri ( ) Page R ( ) Page Ri ( ) Page R ( ) Page 839 Integrated wireless data output is possible with 1086 Ri and 1087 Ri indicators. * Over the full length of the anvils, excluding indicator **With extension 44 Av DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS BASIC UNIT for 44 EWR Series 44 EWG SELF CENTERING 3 POINT INTERNAL BORE PISTOL SET Includes Indicator Series 844 AS ZERO SETTERS USB RS232C Digimatic Set includes: 1 basic unit, measuring heads, case and setting rings GRANITE SURFACE PLATES V-BLOCKS & PARALLELS (inch) 6-20 ( ") (.775-4") (4-8") DEPTH EXTENSION ROD for 844 A & 44 EWR Series 44 AV SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS D TOOL PRESETTERS L CALIBRATION SERVICES (inch) Length L Dia. D 6-12 ( ") ( ") ( ") ( ") (inch) Number of Heads Ring Gauges (with 1086 R) (No ind.) 6-12 ( ") 3 8/ ( ") (.775" - 2") 4 25/ (2-4") 4 60/ SOFTWARE sales@cutwel.net Order Online 24/7 823

25 MICROMETERS Insize 3 point internal micrometers DIGITAL SELF CENTERING 3 POINT INTERNAL BORE MICROMETER IP54 Waterproof Series 3127 IP54 ABS USB RS232 Functions on/off ABS/INC /inch ABS (switch between relative and absolute) DATA Type B Type C Type D Data output via USB or RS232C, optional cable required Ratchet stop Auto power off Resistance against dust, coolants and lubricants, protection class IP54 Carbide tipped anvils (from 12) Interchangeable anvils on Type C Supplied with: Case, battery, instructions, setting ring (up to 100), extension rods and manufacturers calibration certificate METROLOGY (inch) Type Depth Setting Ring* Ø Extension Rod* Resolution /inch Error Limit G* 6-8 ( ") B /.00005" ( ") B /.00005" ( ") B /.00005" ( ") C /.00005" ( ") C /.00005" (.775-1") C /.00005" (1-1.2") C /.00005" ( ") C /.00005" (1.6-2") C /.00005" ( ") C /.00005" (2,44-2,95") C /.00005" (2,95-3,46") C /.00005" (3,43-3,94") C /.00005" (3,94-4,92") D /.00005" (4,92-5,91") D /.00005" ( ") D /.00005" ( ") D /.00005" ( ") D /.00005" ( ") D /.00005" ( ") D /.00005" ( ") D /.00005" DIGITAL SELF CENTERING 3 POINT INTERNAL BORE MICROMETER SET SERIES 3127 (inch) Micrometers Included Ring Gauges Included 6-12 ( ") 6-8, 8-10, /8/ ( ") 12-16, (.775" - 2") 20-25, 25-30, 30-40, / (2-4") 50-63, 62-75, 75-88, / Phone us 8am-6pm for next day delivery

26 MICROMETERS Insize 3 point internal micrometers 3 POINT INTERNAL BORE MICROMETER Series graduations graduations WIDE RANGE 3 POINT INTERNAL BORE MICROMETER Series 3228 DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT Type B Type C Type D Type Depth Setting Ring* Ø Extension Rod Error Limit G 6-8 B B B C C C C C C C C C C D D D D D D D D POINT INTERNAL BORE MICROMETER SET SERIES 3227 Depth Setting Ring Error Limit G WIDE RANGE 3 POINT INTERNAL BORE MICROMETER IP54 Waterproof Series 3128 Setting ring included except Includes 150 extension rod / " resolution. IP54 ABS FUNCTIONS & FEATURES same as 3127 (page 824) USB RS232 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES Micrometers Included Ring Gauges , 8-10, /8/ , , 25-30, 30-40, / , 62-75, 75-88, / Depth Setting Ring Error Limit G SOFTWARE sales@cutwel.net Order Online 24/7 825

27 HEIGHT Mahr 2D height gauges Digimar 817 CLM Quick Height Gauge The new Height Instrument Digimar 817 CLM with the innovative Quick Mode. Highly accurate rapid measurements, a wide range of measuring and evaluation options and excellent operator comfort. The best solution for all measuring tasks Ergonomic operating and display unit FAST MEASUREMENT BY HAND Easy to operate due to the "Quick Mode"; an innovative solution from Mahr (patented). QUICK MODE THE DISPLAY UNIT CAN BE POSITIONED FREELY WITH THE SWIVEL ARM Large, back-lit display Self-explanatory guided operation with icons Step 1. Move the measuring carriage by hand in the direction of the object to be measured. Step 2. The motor starts, the measurement procedure will automatically be performed. Easy to operate all measurement functions with the function keys due to the clearly defined symbols. MEASUREMENT USING THE KEYPAD (SPEED KEYS) ON THE BASE Universal measurement possibilities METROLOGY Ideal in conjunction with the air bearings for large work pieces. By using the keys that are integrated into the base; the operator can comfortably move the measuring carriage into the desired position and start a measurement. This eases measurement particularly when measuring large workpieces as these do not have to be moved into position. The operator can keep both hands on the measuring instrument (one hand on the key for the air bearing and other on the high-speed keys) and measure the workpiece in one run. Highest accuracy and reliability Extremely accurate incremental measuring system with double reader head system, insensitive to the contamination of dirt Robust guide column, made from stainless steel head in precision ball bearings guide Temperature compensation with an integrated temperature sensor 20 C Wide range of measurement functions in 1D or 2D Dynamic measurement functions with the analog display Automatic perpendicularity and straightness measurements (in conjunction with accessories) Automated measuring procedures (measurement programs) Auto function for chain measurements and distance measurements Extensive evaluation possibilities Transmit data to a PC via RS232 or USB (with an adapter) for example into MS Excel via the MarCom-Software Print measured values, statistics, etc. via a USB printer Save measued values in the integrated USB memory (will be recognized by a PC as an interchangeable disc drive) or on a USB dongle Broad range of statistical evaluations are available 1D PROG AUTO RS232C STAT 2D USB Phone us 8am-6pm for next day delivery

28 HEIGHT Mahr 2D height gauges DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Order Online 24/7 827

29 HEIGHT Mahr 2D height gauges DIGIMAR HEIGHT MEASURING INSTRUMENT Series 817 CLM With the innovative Quick Mode. Highly accurate rapid measurements, a wide range of measuring and evaluation possiblities and excellent operator comfort. USB RS232C FM RADIO 1D 2D For MarCom pro software 4.0 see page 897 Supplied with: Height measuring instrument incl. operating and display unit,carrier 817h1, probe K6/51, setting block 817 eb, operating instructions, mains power adapter, USB cable Quick mode for fast measurement Wide range of measurement functions in 1D and 2D Motorized measuring carriage Bore diameter Dynamic max/min measurement functions Tolerence monitoring Automatic perpendicularity/straightness measurement (with accessories) Angle calculation Broad range of statistical evaluations 40 automated measuring prograes Auto function for chain and distance measurements Temperature compensation Air Bearings Integrated USB memory Data output via USB, RS232C or Wireless FM Radio USB Printer interface 40 prograes for automated measuring Quick Mode: Simply move the measuring carriage by hand in the direction of the object to be measured, the motor will start and the measurement procedure will be performed automatically. Easy to Use: The operating and dispay unit can be positioned freely with the swivel arm, it has a large back-lit display with icons for self explanatory guided operation and all functions can be operated via speed keys. METROLOGY *At 20 C in conjunction with a base plate in accordance to DIN 876/0 and a standard probe K6/51 Model Application Graduation inch Error* µm /0.005/0.001/ / /0.0005/0.0001/ / L/600 (L in ) /0.005/0.001/ / /0.0005/0.0001/ / L/600 (L in ) /0.005/0.001/ / /0.0005/0.0001/ / L/600 (L in ) Phone us 8am-6pm for next day delivery

30 HEIGHT Mahr 1D height gauges DIGIMAR HEIGHT MEASURING INSTRUMENT 816 CL Series The robust and user-friendly height on measuring instrument, perfect for accurate measurements on the production line. USB RS232C FM RADIO 1D Connect with MarCom professional software 4.0 see page 897 Supplied with: Height measuring instrument incl. operating and display unit,carrier 817h1, probe K6/51, setting block 817 eb, operating instructions, mains power adapter Wide range of measurement functions in 1D Motorized measuring carriage Bore diameter Dynamic max/min measurement functions Automated measuring procedure Temperature compensation Air Bearings Data output via USB, RS232C or Wireless FM Radio DIGITAL CALIPERS DEPTH MICROMETERS Precise Results: The motorized measuring carriage minimizes the influence caused by the operator. HEIGHT 3D TESTERS MEASURING TOOL SETS User Friendly Operation: The operating and dispay unit has a large back-lit display with icons for self explanatory guided operation and all functions can be operated via speed keys. EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS Model Application Graduation Error* µm CALIBRATION SERVICES SOFTWARE / L/600 (L in ) / L/600 (L in ) sales@cutwel.net Order Online 24/7 829

31 HEIGHT Mahr 1D height gauges DIGIMAR DIGITAL HEIGHT GAUGE/SCRIBER Series 814 SR USB RS232C Digimatic FM RADIO ABS Resolution: 0.01/0.0005" Rest, ABS/INC Reference-Lock/Unlock, PRESET (To enter a numerical value),data, Auto-ON/OFF Carbide tipped scriber 3 Year battery life Data output via USB, RS232C, Digimatic or Wireless FM Radio 12 high LCD display Hardened and lapped contact surface which produce both a smooth and even movement. Fine adjustment Interchangable scriber Sturdy heavyweight base Connect with MarCom professional software 4.0 see page 897 Accuracy Resolution (inch) inch ± (.0005 ) ± DIGIMAR DIGITAL HEIGHT GAUGE/SCRIBER Series 814 N RS232C FM RADIO Ideal for measuring heights & distances between bore centres, widths, etc. High accuracy Constant measuring force Fine adjustment Data output via RS232C or Wireless FM Radio Digital preset Zero setting in any position head can be locked in position Wide range of accessories for a wide range of applications MAX, MIN & MAX-MIN functions Cast iron base Connect with MarCom professional software 4.0 see page 897 Accuracy Resolution inch (inch) ± / ±0.03 (.0005 / ) Cast iron base METROLOGY DIGIMAR DIGITAL HEIGHT GAUGE/SCRIBER Series 814 G RS232C FM RADIO Ideal for measuring heights & distances between bore centres, widths, etc High accuracy Constant measuring force Fine adjustment Data output via RS232C or Wireless FM Radio Digital preset Zero setting in any position head can be locked in position Wide range of accessories for a wide range of applications MAX, MIN & MAX-MIN functions Fine grain black granite base Connect with MarCom professional software 4.0 see page 897 Granite base Accuracy Resolution inch (inch) ± / ±0.03 (.0005 / ) Phone us 8am-6pm for next day delivery

32 HEIGHT Insize 1D height gauges DOUBLE COLUMN DIGITAL HEIGHT GAUGEL/SCRIBER WITH DRIVING WHEEL Series 1151 ABS Resolution: 0.01/0.001" Functions: on/off, zero, /inch, ABS/INC, preset +, preset - Carbide tipped scriber SR44 or LR44 battery With driving wheel DIGITAL CALIPERS DEPTH Accuracy inch ± ± Cast iron base MICROMETERS HEIGHT ± SINGLE COLUMN DIGITAL HEIGHT GAUGE/SCRIBER Series 1150 ABS USB 3D TESTERS Resolution: 0.01/0.0005" Functions: on/off, zero, /inch, ABS/INC, data hold, TOL, set Carbide tipped scriber SR44 or LR44 battery Data output via USB Supplied with clamp MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Accuracy inch ± ± ± ± DOUBLE COLUMN DIAL HEIGHT GAUGE/SCRIBER WITH DRIVING WHEEL Series 1351 Cast iron base GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES Dial indicator graduation: 0.01 One counter reads in the plus direction and another in the minus direction, so incremental measurement can be made in either direction. Carbide tipped scriber With driving wheel HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Accuracy ± ± ± sales@cutwel.net Order Online 24/7 831

33 MarCator Dial Indicators 803 & 805 Series Compact Dial Indicators b 11 ø4 e a 16 d f Mahr dial indicators MarCator dial indicators from Mahr all feature high precision gears & pinions, with chrome plated housing and protected lifter caps. With the added benefit of replaceable dial faces, MarCator dial indicators are ideal for the toughest working conditions. c 803 & 805 Series MarCator indicators all feature a compact dial face of just 40. All indicators listed from Mahr have an 8 mounting shank Ø a b c Ø d e f g 803 A A S SW ø.375 ø8h6 g ø6,5 ø6, SB M 2,5 6 WATERPROOF DIAL INDICATOR Series 830 SW SHOCKPROOF DIAL INDICATOR Series 803 S Graduation 0.01 Hermitically sealed protection cap IP54 waterproof Graduation 0.01 Hermitically sealed protection cap Shock proof Accuracy µm Hysteresis µm Overtravel Force Dial Reading Accuracy µm Hysteresis µm Overtravel Force Dial Reading DIAL INDICATOR 803 A / 805 A Series 803 A & 805 A DIAL INDICATOR Series 803 SB METROLOGY Graduation 0.01 High precision gears & pinions Compact Design Graduation 0.01 Large overtravel for easier insertion of test items Shock proof 803 A 805 A Accuracy µm Hysteresis µm Overtravel Force Dial Reading Accuracy µm Hysteresis µm Overtravel Force Dial Reading Phone us 8am-6pm for next day delivery

34 b Mounting Lug Bore perpendicular to mounting shank Order code: Bore parallel to mounting shank Order code: ø8h6 M 2,5 ø4 e a 16 d f Mahr dial indicators MarCator Dial Indicators 810 Series Dial Indicators 810 Series MarCator indicators all feature a larger dial face of All indicators listed from Mahr have an 8 mounting shank. c 961 a b c d e f g 810 A/AT S SW SB SM SRM ø.375 g 6 ø6,5 ø6,5 962 DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT WATERPROOF DIAL INDICATOR Series 810 SHOCKPROOF DIAL INDICATOR Series 810 Graduation 0.01 Hermitically sealed protection cap IP54 waterproof & shock proof Graduation 0.01 Hermitically sealed protection cap IP54 waterproof & shock proof 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Accuracy µm Hysteresis µm Overtravel Force Dial Reading Accuracy µm Hysteresis µm Overtravel Force Dial Reading GRANITE SURFACE PLATES V-BLOCKS & PARALLELS DIAL INDICATOR Series 810 A & 810 AT PRECISION DIAL INDICATOR Series 810 SM & 810 SRM SQUARES, LEVELS & PROTRACTORS Graduation 0.01 High precision gears & pinions Shock proof Graduation High precision gears & pinions Shock proof MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES 810 A 810 AT 810 SM 810 SRM SOFTWARE Accuracy µm Hysteresis µm Overtravel Force Dial Reading Accuracy µm Hysteresis µm Overtravel Force Dial Reading sales@cutwel.net Order Online 24/7 833

35 Insize dial indicators PRECISION DIAL INDICATOR Series 2313 COMPACT DIAL INDICATOR Series 2311 Graduation Jewelled bearing Supplied with limit hands and bezel clamp Graduation 0.01 Jewelled bearing Supplied with limit hands Ø58 16 Ø Ø Ø Ø4.5 M2.5x0.45 DIAL INDICATOR Series 2308 LONG RANGE DIAL INDICATOR Series 2310 Graduation 0.01 Jewelled bearing Supplied with limit hands and bezel clamp Graduation 0.01 Supplied with limit hands and bezel clamp Ø58 45 Ø Ø Ø56 Ø Ø42 30 Ø Ø40 Ø Ø4 M2.5X0.45 Accuracy µm Hysteresis µm / Rev Dial Reading Note Flat Back FA Flat Back FA Lug Back A Lug Back A Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back Lug Back Flat Back F Flat Back F Ø Ø Ø Ø4.5 M2.5X M2.5X0.45 Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back A Lug Back A Lug Back A Flat Back FA Flat Back FA Flat Back FA Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back A Lug Back A Flat Back FA Flat Back FA METROLOGY WATERPROOF DIAL INDICATOR Series 2324 Graduation 0.01 Jewelled bearing IP54 Waterproof 45 Ø Ø SHOCKPROOF DIAL INDICATOR Series 2314 Graduation 0.01 Shockproof Supplied with limit hands and bezel clamp Jewelled bearing 45 Ø Ø Ø Ø Ø M2.5X M2.5X0.45 Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back Flat Back F Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back A Flat Back FA Phone us 8am-6pm for next day delivery

36 Insize dial indicators REVERSE READING INDICATOR Series 2802 Graduation 0.01 Suitable for step and depth measurements Jewelled bearing Supplied with limit hands and bezel clamp LONG REACH DIAL INDICATOR Series 2309 Graduation 0.01 Shockproof Supplied with limit hands DIGITAL CALIPERS *with spare lug DEPTH Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back Flat Back F Accuracy µm Hysteresis µm / Rev Dial Reading Note Lug Back Flat Back F Flat Back* Flat Back* MICROMETERS HEIGHT DOUBLE FACE DIAL INDICATOR Series 2328 INDICATOR WITH LIFTING LEVER Series 2329 Graduation 0.01 Jewelled bearing Supplied with limit hands Read from both sides Graduation 0.01 Jewelled bearing Supplied with limit hands 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Accuracy µm Hysteresis µm / Rev Dial Reading Note Double Accuracy µm Hysteresis µm / Rev Dial Reading Note Flat Back GRANITE SURFACE PLATES NEEDLE POINTS L1 BALL POINTS SHELL POINTS FLAT POINTS D D V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS L L L Type A Type B MICROSCOPES & ENDOSCOPES Material L L1 Steel Steel Steel Steel SPHERICAL POINT Ø10 5 Material Steel Material L Carbide Ceramic Carbide Carbide Carbide Carbide Ceramic Carbide Carbide Carbide Ceramic Carbide Carbide Ceramic Carbide Ceramic Material L Steel Steel Steel Steel Steel Steel CONICAL POINTS Material Type Steel A Steel B Material Type D Steel A Steel A Steel B Steel B Steel B Steel B Type A Type B Type C Type D Material Type Steel C Steel D HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 835

37 Mahr digital indicators MarCator. Digital Indicators Digital Indicators with the Reference System Mahr sets a new standard in the digital indicator product segment with the new generation of Digital Indicators MarCator 1086 Ri / 1087 Ri Reference. With the new Reference system the MarCator digital indicators can be applied iediately as the zero-position only has to be set once for all further measurements. Also, if you need to document your data, we have our integrated wireless indicators; an integrated energy efficient wireless data transmission system, the optimal solution for transmitting your measured values to a PC. Clear display Tolerance can be displayed in two ways 0 TOL Universal SPC-interface USB RS232C Digimatic You have the choice to output data to USB, Digimatic or Opto RS232 Tolerance value is displayed Displayed is the actual measured value and the tolerance zone position Optional Integrated Wireless INTEGRATED Tolerance indication without the value in the display. In and Out of tolerance will be indicated in the display as a symbol. Integrated Wireless is a new data transmission system from Mahr. Data acquisition with inidicators is now even easier: Simply transmit your measured data directly into Microsoft Excel or via a keyboard code into any Windows program. With Integrated Wireless your data will be transferred from the indicator; this is confirmed with a message in the display to whether the data has been transferred correctly, and/or whether you are in the reception range of the i-stick. METROLOGY Lock function Prevents unintentional activation of an operating button. All buttons or individual buttons can be locked. If a locked operating button is pressed the "LOC" symbol will appear in the display. Absolute function ABS Digital Indicator can be set in any position to without losing the reference to the preset value. Reference System All MarCator Digital indicators are equipped with the innovative Reference-System. After setting the zero position it remains stored for all further measurements, you don't need to reset the zero position every time the indicator is switched on. Battery life Reference-System + 50% Conventional The new Reference system is extremely energy efficient as when the indicator is in standby mode; almost no power is required, which extends the battery life by up to 50% Phone us 8am-6pm for next day delivery

38 TOL SET TOL PRESET SET PR MENU DATA ON/OFF RESET ABS 6 Mahr digital indicators MARCATOR DIGITAL INDICATOR For Static Measurements Series 1086 Ri & 1086 R IP42 0 TOL ABS USB RS232C Digimatic INTEGRATED Standard Optional Functions Optional wireless Optional wireless ON/OFF RESET (Set display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) TOL (Enter tolerance limit values) ABS (Display can be set to zero, without losing the reference to the Preset value) <0> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT (inch) 1086 Ri Switchable Resolution Fixed Span of Error Data Output Wireless Data Output Force N Mounting Shank a b c 12.5 (.5") (h6) (1") /0.001/0.002/ 0.005/ (h6) (2").00002"/.00005"/ "/.0002"/.0005" 8 (h6) (4") (h6) R 12.5 (.5") 25 (1") (h6) /.0005" 50 (2") (h6) (h6) (4") (h6) (.5") (h6) /0.001/0.002/ 25 (1") 0.005/ (h6) "/.00005"/ - 50 (2") (h6) "/.0002"/.0005" 100 (4") (h6) (.5") R MarCator 1086 R a ø58,5 b c 1086 b 21 45,5 ø4 35,5 26,5 ø13 ø8h6 (ø3/8 ) M 2,5 (4-48" UNF) ø60,5 25 All models feature data output via USB, OPTO RS232C or Digimatic, optional cable required, with the option of integrated wireless data on models 1086 Ri. Iediate measurement due to the Reference system Individual buttons can be locked - Lock Function Operating and display unit (bezel) can be rotated 280 High contrast LCD with 11 high digits Operating time approx. 3 years (2000 work. hrs/year) Maximum measuring speed 1.5 m/s (60"/s) Lifter protection cap on the measuring spindle Class of protection IP42 Repeatabillity (h6) (1") (h6) /.0005" 50 (2") (h6) (4") (h6) D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: i-stick WIRELESS RECIEVER Includes MarCom Standard Software: MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) LUG BACKS Vertical: Horizontal: CONTACT POINTS Please contact us for a Mahr Catalogue sales@cutwel.net Order Online 24/7 837

39 TOL SET TOL PRESET SET PR MENU DATA ON/OFF RESET ABS a c 6 Mahr digital indicators MARCATOR DIGITAL INDICATOR Waterproof Version For Static Measurements Series 1086 WRi & 1086 WR IP54 0 TOL ABS USB RS232C Digimatic INTEGRATED Standard Optional Optional wireless Optional wireless Functions ON/OFF RESET (Set display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) TOL (Enter tolerance limit values) ABS (Display can be set to zero, without losing the reference to the Preset value) <0> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Repeatabillity R MarCator 1086 R ø58,5 b 1086 b 21 45,5 35,5 26,5 ø13 ø8h6 (ø3/8 ) ø4 M 2,5 (4-48" U 25 All models feature data output via USB, OPTO RS232C or Digimatic, optional cable required, with the option of integrated wireless data on models 1086 WRi. Iediate measurement due to the Reference system Individual buttons can be locked - Lock Function Operating and display unit (bezel) can be rotated 280 High contrast LCD with 11 high digits Operating time approx. 3 years (2000 work. hrs/year) Maximum measuring speed 1.5 m/s (60"/s) Lifter protection cap on the measuring spindle Class of protection IP54 (inch) 1086 WRi Switchable Resolution Fixed Span of Error Standard Data Output Wireless Data Output Force N Mounting Shank a b c 12.5 (.5") /0.001/0.002/ (h6) / "/.00005"/ 25 (1").0001"/.0002"/.0005" (h6) METROLOGY 12.5 (.5") (h6) /.0005" 25 (1") (h6) WR 12.5 (.5") /0.001/0.002/ (h6) / "/.00005"/ 25 (1").0001"/.0002"/.0005" (h6) (.5") (h6) /.0005" 25 (1") (h6) ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: i-stick WIRELESS RECIEVER Includes MarCom Standard Software: MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) MOUNTING LUG ADJUSTABLE MOUNTING BACK CONTACT POINTS Please contact us for a Mahr Catalogue Phone us 8am-6pm for next day delivery

40 TOL MAX/MIN ON/OFF SET TOL MENU PRESET SET PR DATA RESET ABS a Mahr digital indicators MARCATOR DIGITAL INDICATOR With analogue display for dynamic measurements Series 1087 Ri & 1087 R IP54 0 TOL MAX MIN ABS USB RS232C Digimatic INTEGRATED Standard Optional Functions Optional wireless Optional wireless ON/OFF RESET (Set display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) TOL (Enter tolerance limit values) Tolerance band max, 1.6 MAX/MIN memory, ideal for searching the reversal point TIR (MAX-MIN) ideal for testing concentricity and flatness ABS (Display can be set to zero, without losing the reference to the Preset value) <0> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Repeatabillity DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT R F DATA PRESET TOL ABS inch MarCator 1087 R ø58,5 6 c b 1086 b 21 45,5 35,5 26,5 ø4 ø13 ø8h6 (ø3/8 ) M 2,5 (4-48" UNF) ø60,5 25 Suitable for dynamic measurings All models feature data output via USB, OPTO RS232C or Digimatic, optional cable required, with the option of integrated wireless data on models 1087 Ri. Iediate measurement due to the Reference system Individual buttons can be locked - Lock Function Operating and display unit (bezel) can be rotated 280 High contrast LCD with 11 high digits Operating time approx. 3 years (2000 work. hrs/year) Maximum measuring speed 1.5 m/s (60"/s) Lifter protection cap on the measuring spindle Class of protection IP54 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS (inch) 1087 Ri Resolution Switchable Span of Error Standard Data Output Wireless Data Output Force N Mounting Shank a b c 12.5 (.5") (h6) /0.00 / / "/.00005"/.0001"/.0002"/.0005" 25 (1") (h6) R 12.5 (.5") (h6) /0.00 / / "/.00005"/.0001"/.0002"/.0005" 25 (1") (h6) ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: i-stick WIRELESS RECIEVER Includes MarCom Standard Software: MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) MOUNTING LUG ADJUSTABLE MOUNTING BACK CONTACT POINTS Please contact us for a Mahr Catalogue GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Please visit our website for full specifications sales@cutwel.net Order Online 24/7 839

41 Mahr digital indicators MarCator Digital Indicator for tolerance monitoring. Tolerance monitoring is simplified with the changing of the color in the background lit display. Dynamic measuring functions MAX-MIN-Function ideal for testing flatness and concentricity MAX and / or MIN for searching the reversal point MAX MIN Control output Can be connected to a SPS Tolerance function 0 TOL Universal SPC-interface USB RS232C Digimatic You have the choice to output data to USB, Digimatic or Opto RS232 Clearly visual tolerance excess due to the change of color in the background lit display. Protection class IP54 IP54 Suited for use in a manufacturing environment (excludes measuring range 50 ) Absolute function ABS Digital Indicator can be set in any position to without losing the reference to the preset value. METROLOGY ANALOG DISPLAY Readings (switchable) Display range inch inch " ± ±.0015" I 30 ABS " ± ±.0030" " ± ±.0150" " ± 0.30 ±.030" Phone us 8am-6pm for next day delivery

42 MARCATOR DIGITAL INDICATOR With analogue display for dynamic measurements Series 1088 W & 1088 DIGITAL CALIPERS DEPTH 144,3 (inch) ø63 21,5 26,6 6 9,5 37 ø.375 ø8 53,6 ø65 193,3 ø63 25, ,5 37 ø.375 ø8 75 ø65 Resulution 268,3 6 Mahr digital indicators IP54 0 TOL MAX MIN ABS USB RS232C Digimatic ø ø63 59,5 54,5 inch 9,5 37 ø.375 ø8 79,5 ø65 Span of Error Force N Protection Class IP 12.5 (.5") " IP (1") " IP (2") " IP Functions ON/OFF RESET (Set display to zero) (set analog display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) TOL (Enter tolerance limit values) Tolerance band max, 1.6 MAX/MIN memory, ideal for searching the reversal point TIR (MAX-MIN) ideal for testing concentricity and flatness ABS (Display can be set to zero, without losing the reference to the Preset value) <0> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Repeatabillity Suitable for dynamic measurings Control output compatible to Dial Comparators with limit contacts Power supply via the main power adapter Data output via USB, OPTO RS232C or Digimatic, optional cable required or optional wireless Can be remotely operated via the interface (Opto RS232C) Iediate measurement due to the Reference system Individual buttons can be locked - Lock Function Operating and display unit (bezel) can be rotated 280 High contrast back lit LCD with 6.5 high digits Analog display with 4 pointer ensures better visual recognition, ideal when checking concentricity or flatness as well as searching for the reversal point when measuring bores Operating time approx. 3 years (2000 work. hrs/year) Maximum measuring speed 1.5 m/s (60"/s) Lifter protection cap on the measuring spindle Class of protection IP54 (50 IP42) MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE ACCESSORIES DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m0), Flat plug 10-pin 16 EWd: SPS data cable: MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) MOUNTING LUG REMOTE CONTROL sales@cutwel.net Order Online 24/7 841

43 TOL MIN/MAX ON/OFF SET TOL PRESET START/STOP SET PR MarCator 1087 B /inch RESET ABS Mahr digital indicators MARCATOR DIGITAL INDICATOR For 2 point inside and outside measurement Series 1087 BRi & 1087 BR IP42 0 TOL MAX MIN ABS USB RS232C Digimatic INTEGRATED Standard Optional EXAMPLE OF APPLICATION Functions 1 TOL MIN/MAX ON/OFF SET TOL /inch PRESET START/STOP RESET SET PR ABS MarCator 1087 B 2 3 TOL MIN/MAX ON/OFF SET TOL /inch PRESET START/STOP RESET SET PR ABS MarCator 1087 B ON/OFF RESET (Set display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) TOL (Enter tolerance limit values) Tolerance band max, 1.6 MAX/MIN memory, ideal for searching the reversal point ABS (Display can be set to zero, without losing the reference to the Preset value) 0 (Set analogue display to zero) DATA (when connected with a data connection cable) Factor (adjustable) Repeatabillity BR TOL MIN/MAX ON/OFF SET TOL MENU F DATA PRESET TOL ABS inch PRESET START/STOP RESET SET PR ABS MarCator 1087 BR a ø58,5 6 c b 21 35,5 26,5 ø13 ø8h6 ø4 M 2,5 ø60,5 With a 2 point inside measuring instrument the point of reversal is automatically determined through rocking back and forth. The actual value is detected and stored by the MIN function and indicated in the display (3). Suitable for 2 point measurement Data output via USB, OPTO RS232C or Digimatic, optional cable required or optional wireless Iediate measurement due to the Reference system Individual buttons can be locked - Lock Function Operating and display unit (bezel) can be rotated 280 High contrast LCD with 8.5 high digits Sealed protection cap Operating time approx. 3 years (2000 work. hrs/year) Maximum measuring speed 1.5 m/s (60"/s) Lifter protection cap on the measuring spindle Class of protection IP54 (50 IP42) METROLOGY (inch) 1087 BRi 12.5 (.5") 1087 BR 12.5 (.5") ACCESSORIES Resolution Switchable /0.001/0.002/0.005/ "/.00005"/.0001"/.0002"/.0005" /0.001/0.002/0.005/ "/.00005"/.0001"/.0002"/.0005" Span of Error Repeatabillity DATA CONNECTION CABLES USB (2 m) 16 EXu: Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr: Digimatic (2 m), Flat plug 10-pin 16 EWd: Standard Data Output Wireless Data Output Force N a b c i-stick WIRELESS RECIEVER Includes MarCom Standard Software: MARCOM SOFTWARE Standard: (page 897) Professional: (page 897) MOUNTING LUG ADJUSTABLE MOUNTING BACK Need advice? Our tech team is here to help Call Phone us 8am-6pm for next day delivery

44 Mahr & Insize digital indicators MARCATOR DIGITAL INDICATOR Series 1075 R IP52 USB RS232C Digimatic Functions ø53, Rbh 13,5 11 ø6,35 ø59, ,4 ø8h6 ø4 M 2,5 13, ø53,8 ø6, Rbv ø ON/OFF RESET (Set display to zero) /inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with a data connection cable) LOCK-Function: Individual buttons can be locked Auto-OFF (selectable) Iediate measurement due to the Reference system Max measuring speed 1.5 m/sec (60"/sec) Data output via USB, OPTO RS232C or Digimatic, optional cable required High contrast Liquid Crystal Display with 12 high digits DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT (inch) Resulution Span of Error Force N inch " (.5") " " D TESTERS WATERPROOF DIGITAL INDICATOR For Static Measurements Series 2115 IP65 IP54 USB RS232 MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Functions ON/OFF /inch Zero DATA (when connected with a data connection cable) Suitable for static measuring Data output via USB or RS232C, optional cable required Digital display Auto power off IP54 or IP65 waterproof Supplied with manufacturers calibration certificate GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS Resulution Span of Error (inch) Note IP Rating inch 12.7 (.5") " lug back IP (1") " lug back IP (.5") " flat back IP F 25.4 (1") " flat back IP F 12.7 (.5") " lug back IP (1") " lug back IP (.5") " flat back IP F 25.4 (1") " flat back IP F SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 843

45 Insize digital indicators DIGITAL INDICATOR With analogue display for dynamic measurements Series 2103 & 2104 ABS USB RS Display can be rotated by 320 Functions Ø58 28 M2.5X Ø Ø Ø Ø M2.5X Ø13 Ø Ø Ø Ø58 28 M2.5X Ø13 Ø Ø ON/OFF RESET (Set display to zero) /inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) Tolerance band max, 1.6 MAX/MIN memory, ideal for searching the reversal point ABS (Display can be set to zero, without losing the reference to the Preset value) Tolerance GO / NO GO display mode DATA Suitable for dynamic measuring Data output via USB or RS232C, optional cable required Operating and display unit (bezel) can be rotated 320 Analog & digital display Auto power off Supplied with manufacturers calibration certificate METROLOGY (inch) Resulution inch Span of Error 12.7 (.5") " Lug Back (1") " Lug Back (2") " Lug Back (.5") " Flat Back F 25.4 (1") " Flat Back F 50.8 (2") " Flat Back F Note 12.7 (.5") " Lug Back (1") " Lug Back (2") " Lug Back (.5") " Flat Back F 25.4 (1") " Flat Back F 50.8 (2") " Flat Back F Phone us 8am-6pm for next day delivery

46 Insize digital indicators DIGITAL INDICATOR For Static Measurements Series 2112 USB RS232 DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT D TESTERS 25.4 MEASURING TOOL SETS (inch) Resulution inch Span of Error Note 12.7 (.5") " Lug Back (1") " Lug Back (2") " Lug Back (.5") " Flat Back F 25.4 (1") " Flat Back F 50.8 (2") " Flat Back F 12.7 (.5") " Lug Back (1") " Lug Back (2") " Lug Back Functions ON/OFF RESET (Set display to zero) /inch Zero DATA Suitable for static measuring Data output via USB or RS232C, optional cable required Digital display Auto power off Supplied with manufacturers calibration certificate EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE 12.7 (.5") " Flat Back F 25.4 (1") " Flat Back F 50.8 (2") " Flat Back F Order Online 24/7 845

47 Dial & digital test indicators Dial & Digital Test Indicators Dial face is sealed with an O-Ring Satin chrome finished housing SHOCK PROOF Mechanism Shockproof Anti magnetic Movement bearings are jeweled with 8 precious stones Automatic matching to sensing direction, thus ensuring error-free reading Double lever supported in ball bearings, overload protection provided by slip clutch Contact point with carbide ball DIGITAL TEST INDICATOR MARTEST IP65 Waterproof Series 800 EW & 800 EWL IP65 USB RS232C SHOCK PROOF 18,9 36,7 60, ,9 36,7 60, ,6 17, ø ,3 44,6 Type 800 EW ø 2 9 Type 800 EWL METROLOGY (inch) ± 0.4 (±.015") Resolution Switchable 0.001/ "/.0005" Force N Length of Styli Type EW EWL ACCESSORIES 800 EW 800 EWL STYLI, WITH CARBIDE CONTACT POINT 1 diameter: diameter: diameter: STYLI, WITH RUBY CONTACT POINT 2 diameter: DATA CONNECTION CABLES USB: Opto RS232: STYLI WITH CARBIDE CONTACT POINT 1 diameter: diameter: diameter: STYLI WITH RUBY CONTACT POINT 2 diameter: BATTERY 3V, Type CR 2032: Functions ON/OFF RESET (Set display to zero) /inch MAX/MIN memory MAX-MIN ideal for testing concentricity and flatness Auto-OFF Inductive measuring system, battery life span 2 years Data output via USB, OPTO RS232C or Digimatic, optional cable required or optional wireless Operating unit is protected against coolants and lubricants, protection class IP65 Combined analog and digital display Operating and display unit (bezel) can be rotated through 360 Shockproof, movement bearings are jewelled Anti-magnetic Double lever supported in ball bearings, overload protection provided by slip clutch Supplied with: plastic case, spanner to change the styluses, contact point dia. 2, mounting shaft 800a Phone us 8am-6pm for next day delivery

48 dial test indicators MARTEST DIAL TEST INDICATOR Shock Proof Series 800 SHOCK PROOF 26 49, ,5 17 ø 40,5* ø 30** *** 17 ø 40,5* ø 30** *** ,6 8,3*** 17,8 9,1*** ø *** *** ,3 (31,4***) 44,6 (35,7***) ø 2 9 DIGITAL CALIPERS DEPTH Shockproof, movement bearings are jewelled Anti-magnetic Replaceable dial face (sealed with an o-ring) Double lever supported in ball bearings, overload protection provided by slip clutch Figure 1 Figure 2 * 800 SG, 800 SGA, 801 SG, 801 SGI ** 800 S, 800 SA, 801 S1, 801 S *** 800 SGE * 800 SGL, 801 SGL, 800 SGB ** 800 SL, 801 SL *** 800 SGB MICROMETERS HEIGHT Readings Clock Reading Dial Diameter Force N Length of Styli ± S ± SG ± SA ± SGA ± SM ± SGM ± SGE ± SL ± SGL ± SGB Type Figure 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS MARTEST STYLUSES Carbide or Ruby Contact Points DIAL TEST INDICATOR Series 2380 & 2381 GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS Diameter Type Applicable Dial Test Indicators Length 1 Carbide Carbide 800 S, 800 SG, 800 SA SGA, 800 SM, 800 SGM Ruby 801 SGE, 800 SR, 800 SRM Carbide Carbide Carbide SGE Ruby Carbide Carbide Carbide SL, 800 SGL Ruby Carbide Carbide Carbide SGB Ruby Carbide range L Readings 8.9 SØ2 Clock Reading Dial Diameter Length of Styli A MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 847

49 INDICATOR ACCESSORIES indicator holders DIAL TEST INDICATOR HOLDER Series 6293 DIAL TEST INDICATOR HOLDER Series 6296 Shank Shank Length 9x x DIAL TEST INDICATOR UNIVERSAL HOLDER Series 6297 DIAL TEST INDICATOR CENTERING HOLDER Series DIAL TEST INDICATOR CENTERING HOLDER Series 6295 INDICATOR CENTERING HOLDER Series 6294 METROLOGY A A Phone us 8am-6pm for next day delivery

50 INDICATOR ACCESSORIES indicator stands UNIVERSAL MAGNETIC STAND 6210 For digital/dial indicators & dial test indicators Series 6210 With Fine Adjustment & Dovetail Groove DIGITAL CALIPERS Stem Diameter Magnetic Force kgf DEPTH MICROMETERS HEIGHT FLEX ARM MAGNETIC STAND For dial test indicators Series 6207 MINI MAGNETIC STAND For dial test indicators Series D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS Stem Diameter Magnetic Force kgf 8, 4, 3/ A Stem Diameter Magnetic Force kgf 6, GRANITE SURFACE PLATES V-BLOCKS & PARALLELS UNIVERSAL MAGNETIC STAND For digital/dial indicators & dial test indicators Series 6201 SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS Stem Diameter Magnetic Force kgf 8, 4, 3/ , 4, 3/ , 4, 3/ , 4, 3/ CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 849

51 /inch ABS PRESET SET ABS RANGE 0 Extramess 2000 ON/OFF RESET 6 digital comparators Millimess 2100 Digital Comparator Tolerance monitoring is simplified with the color change in the background lit display. Dynamic measuring functions MAX / MIN for example, finding the reversal point MAX - MIN storing values for example when testing concentricity and flatness MAX MIN Control output Can be connected to a SPS Tolerance function 0 TOL Universal SPC-interface USB RS232C Digimatic You have the choice to output data to USB, Digimatic or Opto RS232 Clearly visual tolerance excess due to the change of color in the background lit display. Absolute function ABS Linearized, inductive absolute measuring system. Reference point is not lost when the instrument is switched off Protection class IP54 High precision IP54 Suited for use in a manufacturing environment (excludes measuring range 50 ) Rotary stroke bearings for a longer service life and higher capacity METROLOGY MILLIMESS INDUCTIVE DIGITAL COMPARATOR With background lit display Series 2100 IP54 0 TOL MAX MIN ABS USB RS232C Digimatic I ,5 ø ø6, b 16,5 8, Operating buttons 2 Display 3 Mounting shank 4 spindle 5 Contact point 901H 6 Connection or mains power supply 7 Data output 8 Rotatable operating and display unit (bezel) 8,5 34,5 ø.375 ø8h6 ø4 42 ø65 75,5 Functions ON/OFF RESET (zero setting the digital and analog displays) (set the analog display to zero) PRESET ( enter any numerical values) DATA (data transmission) /inch-switchable Reversal of counting direction RANGE (switch the measuring range and resolution) ABS (reference to electrical zero point) MAX / MIN memory, e.g. ideal to search for the reversal point MAX-MIN e.g. testing concentricity and flatness TOL (entering tolerance) Tolerance band max. 2.8 LOCK: operating functions can be blocked via PC-Software Factor can be set / adjusted Linearized inductive absolute measuring system Measurement electronic is compensated for temperature Power supply via the mains power adapter Data output via USB, OPTO RS232C or Digimatic, optional cable required or optional wireless Remote control via the interface (Opto RS232C) Control output compatible to Dial Comparators with limit contacts Operating and display unit can be rotated through 280 force spring is interchangeable Lower stop is adjustable Protection class IP54 Supplied with: Mains adapter, rubber bellows and spanner for preliminary stroke setting Resolution Display Switchable Switchable of Analogue Display ±1.0/±1.4 ±.04"/±.055" /0.001/0.005/ "/.00005"/.0002"/.0005" ±0.015/±0.030/ ±0.150/ ±0.300 ±.0006"/±.0015"/±.0060"/±.0150" Span or Error G Over Travel 1-2µm Phone us 8am-6pm for next day delivery

52 /inch ABS PRESET SET ABS RANGE 0 Extramess 2000 ON/OFF RESET 6 digital comparators EXTRAMESS INDUCTIVE DIGITAL COMPARATOR Series 2001 IP54 0 TOL MAX MIN Switchable 1.8/ 1.8/0.8.07"/.07"/.031" ABS USB RS232C Digimatic I ,5 ø ø6, b 16,5 8, ,5 34,5 ø Operating buttons 2 Display 3 Mounting shank 4 spindle 5 Contact point 901H 6 Connection or mains power supply 7 Data output 8 Rotatable operating and display unit (bezel) Resolution Switchable 0.001/ / "/.00002"/.00001" 19 ø8h6 ø4 42 ø65 75,5 Display of Analogue Display Functions ON/OFF RESET (zero setting the digital and analog displays) (set the analog display to zero) PRESET ( enter any numerical values) DATA (data transmission) /inch-switchable Reversal of counting direction RANGE (switch the measuring range and resolution) ABS (reference to electrical zero point) MAX / MIN memory, e.g. ideal to search for the reversal point MAX-MIN e.g. testing concentricity and flatness TOL (entering tolerance) Tolerance band max. 1.8 ±0.030/±0.015/±0.006 ±.00015"/±.00006"/±.00003" Factor can be set / adjusted Linearized inductive absolute measuring system Measurement electronic is compensated for temperature Battery charge indicator Data output via USB, OPTO RS232C or Digimatic, optional cable required or optional wireless Remote control via the interface (Opto RS232C) Control output compatible to Dial Comparators with limit contacts Operating and display unit can be rotated through 280 force spring is interchangeable Lower stop is adjustable Protection class IP54 Supplied with:mains adapter, rubber bellows and spanner for preliminary stroke setting Span or Error G Over Travel 0.6/0.6/ /2.4/ DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS ACCESSORIES FOR COMPARATOR SERIES 2100 & 2001 CONTROL INSTRUMENT SERIES 2000 SG Remote control buttons: RESET, PRESET, RANGE DATA-button for data transmission, option via foot switch Power is supplied by the Extramess Connect to the Extramess with the built-in control cable Data can be transferred to a PC with an optional data cable Splash waterproof according to IP54 GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES MEASURING FORCE SPRINGS DATA CONNECTION CABLES HARDNESS TESTERS Cable to connect control output to an SPS: Manual Lifter with cable release: Pneumatic Lifter: Force Adjuster: Mounting Lug Horizontal/Vertical: Adapter Bush for adapting mounting shank 8h6 to inch bore.375": N: N: N: N: N: N: N: USB (2 m): Opto RS232C (2 m), SUB-D jack 9-pin: Digimatic (2 m), flat plug 10-pin: SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE For the latest offers & prices call our sales team phone sales@cutwel.net Order Online 24/7 851

53 MECHANICAL DIAL Series 1002, 1003, 1010 & 1050 SHOCK PROOF 63 ø METROLOGY ø8h6 ø dial comparator & stands 21, M 2, (0-25-0) 1003 (0-50-0) 1003 ( ) 1003 XL ( ) 1003T IP54 (0-50-0) 1002/1003/ , (0-25-0) 1050 (0-15-0) ø8h6 1010/ M 2,5 Constant measuring force Adjustable tolerance markers Shock proof Jeweled movement bearings, precision gears and pinions. Self contained movement, which is both quick and easy to remove and replace Available in standard or waterproof IP54 (includes splash guard cover, rubber bellows and plastic case). Model Readings Overtravel Force N Standard Waterproof 1002 ±25 µm 0.5 µm ±50 µm 1 µm ±50 µm 1 µm ±50 µm 1 µm ±50 µm 1 µm ±50 µm 1 µm ±50 µm 1 µm XL ±130 µm 2 µm ± µm ± ± GRANITE COMPARATOR STAND Series 6866 GRANITE COMPARATOR STAND Series 6867 Stem Diameter Base Flatness µm Stem Diameter Base Flatness µm Phone us 8am-6pm for next day delivery

54 1.0 3D TESTERS dial and digital 3D testers MARTEST MECHANICAL 3D TOUCH PROBE IP67 Waterproof Series 802 NW IP67 3D Application ø16h5 For detirmining the zero position on milling machines of a workpiece For detirmining the centre of a bore MarTest NW High accuracy and linearity: suitable for measuring work pieces & measurement over the entire working range is possible Can be controlled independently of a machine tool Easy to read display Large working range in all axis (X, Y, Z) prevents damage to the stylus by contacting errors Shock and Water proof, ideal for the use on a machine with a tool changer DIGITAL CALIPERS DEPTH ø4 Repeatability Readings Dial Diameter Mounting Shaft ± MICROMETERS HEIGHT MECHANICAL 3D TOUCH PROBE Insize Plus, Made in Germany Series 2842 Application For detirmining the zero position on milling machines of a workpiece For detirmining the centre of a bore Adjustable bezel Can be controlled independently of a machine tool Easy to read display Large working range in all axis (X, Y, Z) prevents damage to the stylus by contacting errors Anti magnetic carbide contact point Compact design Readings Dial Diameter Mounting Shaft D 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS MARTEST DIGITAL 3D TOUCH PROBE 802 EW IP67 Waterproof Series 802 EW IP67 3D Application SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS ø12 ø4 65 ø16h For detirmining the zero position on milling machines of a workpiece For detirmining the centre of a bore High accuracy and linearity: suitable for measuring work pieces & measurement over the entire working range is possible Can be controlled independently of a machine tool Easy to read display: progressive analog display (bar graph) & dynamic path information Large working range - 6 in all axis (X, Y, Z) prevents damage to the stylus by contact errors Shock and Water proof, ideal for the use on a machine with a tool changer Repeatabillity Working X,Y,Z Resolution Display Mounting Shaft ± to SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 853

55 SETS Insize measuring sets 4 PIECE MEASURING TOOL SET Series 5041 Includes: Vernier caliper, range 0-150/0-6", graduation 0.05/1/128" Outside micrometer, range 0-25, graduation 0.01 (code A) 90 bevelled edge square, 100x70, grade 0 (code ) Stainless Steel rule, 150/6" (code ) PIECE MEASURING TOOL SET Series 5052 ABS USB RS232 Includes: Digital caliper, range 0-150/0-6", resolution 0.01/0.0005", (code W) Digital outside micrometer, range 0-25/0-1", resolution 0.001/ " (code A) Digital indicator, range 12.7/0.5", resolution 0.01/0.0005" (code ) Magnetic stand (code ) Micrometer stand (code 6300) PIECE MEASURING TOOL SET Series 5013 METROLOGY USB RS232 Includes: Digital caliper, range 0-150/0-6", resolution 0.01/0.0005", (code ) Outside micrometer, range 0-25, graduation 0.01 (code A) Dial indicator, range 0-10, graduation 0.01 (code A) Magnetic stand (code ) Protractor, range 0-180, graduation 1 (code ) Pitch gauge, range , 24pcs, metric 60 thread (code ) Radius gauge, range 1-7 (code ) Feeler gauge, range , 20pcs (code ) 90 bevelled edge square, 100x70, grade 0 (code ) Scriber (code 7230) Stainless Steel rule, 150/6" (code ) Depth base attachment (code 6140) Zero setting bar Phone us 8am-6pm for next day delivery

56 9B SETTING TOOLS edge finders and zero setters EDGE FINDER Series 6562 ELECTRONIC EDGE FINDER With LED contact light & beeper Series 6566 A A A Ø20 83 Ø20 88 LED light beeper LED light 160 B DIGITAL CALIPERS Shank Ø Contact Point A Ø Contact Point B Ø Accuracy Shank Ø Contact Ball Ø Accuracy Beeper DEPTH MICROMETERS No Yes HEIGHT EDGE FINDER Hardened Shank & Contact Point Series 6567 CERAMIC EDGE FINDER Series 6568 A 3D TESTERS 45 MEASURING TOOL SETS Ø EDGE FINDERS ZERO SETTERS 6 8 C B A 65 Ø B B Shank Ø Contact Point Accuracy Shank Ø Contact Point B Accuracy GRANITE SURFACE PLATES V-BLOCKS & PARALLELS ELECTRONIC ZERO SETTER Magnetic base with LED touch light Series 6550 ZERO SETTER Magnetic base Series 2397 SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS Ø14 Unit: 31,5 SHORE DUROMETERS TOOL PRESETTERS H CALIBRATION SERVICES SOFTWARE Ø54 H Accuracy H Accuracy 50 ± A 50 ± A sales@cutwel.net Order Online 24/7 855

57 BORE Insize digital bore gauges & bore gauge sets DIGITAL BORE GAUGE For Small Holes (6-18.5), Includes Indicator 2152 Series ABS USB RS232 Read the diameter directly after inputting the size of the setting ring MIN MIN The minimum value tracking function can find the diameter automatically METROLOGY 48 Ø4.5 SR0.5(steel) contact point Ø6 SR1 anvil(steel) SR1 anvil(ceramic) SR0.75(steel) contact point Functions Start ABS/INC# Zero /inch ABS (switch between relative and absolute) DATA Data output via USB or RS232C, optional cable required Auto power off Supplied with: Indicator F, case, battery, instructions Indicator (inch) Indicator Resolution (inch) Accuracy Repeatabillity 6-10 ± (0-0.5") (0.0001") ± DIAL BORE GAUGE SET , Includes Indicator 2824 Series Supplied with: Indicator FA, Gauges 18-35, 35-60, Indicator Indicator Graduation Bore Gauges Included Accuracy Repeatability ±0.015 ±0.018 ± S Phone us 8am-6pm for next day delivery

58 BORE Insize digital bore gauges DIGITAL BORE GAUGE , Includes Indicator 2122 Series ABS USB RS232 SR1 anvil(ceramic) F anvil (ceramic) SR1.5(steel) contact point Ø12.7 L ØE Ø m Read the diameter directly after inputting the size of the setting ring MIN MIN The minimum value tracking function can find the diameter automatically. DIGITAL CALIPERS DEPTH A B SR1.5(ceramic) contact point MICROMETERS C ØD HEIGHT range Indicator (inch) Indicator Resolution (inch) Accuracy Repeatability Functions Start ABS/INC# Zero /inch ABS (switch between relative and absolute) DATA Data output via USB or RS232C, optional cable required Auto power off Supplied with: Indicator F, case, battery, instructions A B C ØD ØE F L ± SR A ± SR A ± SR A (0-0.5") (0.0001") ± SR A ± SR A ± SR A ± SR A 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Please visit our website for full specifications sales@cutwel.net Order Online 24/7 857

59 thickness gauges THICKNESS GAUGE Series THICKNESS GAUGE Series Ø58 Ø Graduation Accuracy Graduation Accuracy ± ± DIGITAL THICKNESS GAUGE Ceramic spindle tip and anvil 2871 Series Functions ON/OFF RESET (Set display to zero) /inch Data output, optional cable required Auto power off (inch) Resolution (inch) Accuracy 0-10 (0-0.4") 0.01 (0.0005") ± (0-0.4") ( ") ± THICKNESS GAUGE FOR GROOVES & RECESSES Pointed tips fit into small grooves and recesses 2866 Series METROLOGY 35 Ø50 85 Graduation Accuracy ± Phone us 8am-6pm for next day delivery

60 thickness & caliper gauges DIGITAL THICKNESS GAUGE Ceramic spindle tip and anvil 2867 Series DIGITAL CALIPERS Ø DEPTH MICROMETERS (inch) Resolution (inch) Accuracy HEIGHT 0-10 (0-0.4") 0.01 (0.0005") ± INTERNAL DIAL CALIPER GAUGE 2321 Series L 3D TESTERS A D MEASURING TOOL SETS EDGE FINDERS Graduation Accuracy L A D ± ± ± ± ± ± ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS EXTERNAL DIAL CALIPER GAUGE 2332 Series SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS L 6 Ø3 TOOL PRESETTERS CALIBRATION SERVICES Graduation Accuracy L ± ± ± ± ± SOFTWARE sales@cutwel.net Order Online 24/7 859

61 snap & feeler gauges DIGITAL SNAP GAUGE Series Ø (inch) Resolution (inch) Accuracy 0-25 (0-1") 0.01 (0.0005") ± FEELER GAUGE (25 LEAF SET) Made of hardened alloy steel Series 4601 Accuracy: ±(3+T/80) μm, T is the thickness of leaves in μm Unit: 75 leaf Thickness of leaves included , 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, FEELER GAUGE (25 LEAF SET) Made of hardened alloy steel Series 4602 Accuracy: ±(3+T/80) μm, T is the thickness of leaves in μm Unit: 100 leaf 10.5 METROLOGY Thickness of leaves included 195 No. of Leaves , 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.15, 0.2, 0.3, 0.4, A , 0.1, 0.15, 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, , 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, , 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, , 0.06, 0.07, 0.08, 0.09, 0.1, 0.11, 0.12, 0.13, 0.14, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, , 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.13, 0.15, 0.18, 0.2, 0.23, 0.25, 0.28, 0.3, 0.33, 0.35, 0.38, 0.4, 0.45, 0.5, 0.55, 0.6, 0.63, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, Phone us 8am-6pm for next day delivery

62 pitch, radius & taper gauges PITCH GAUGE Series 4820 Series Check the pitch of screw threads Accuracy: ±0.07 Thread Type Radius of leaves included No. of Leaves DIGITAL CALIPERS Metric , 0.3, 0.35, 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, Metric , 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, TPI Unified 60 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI TPI Whitworth 55 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60, 62 TPI RADIUS GAUGE Series 4801 DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS TAPER GAUGE Made of stainless steel Series 4833 Measure opening, slot width, hole size, etc. Radius of leaves included No. of Leaves Int./Ext MM 14 Unit: Accuracy 1-7 1, 1.25, 1.5, 1.75, 2, 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7 17/17 ± , 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 13.5, 14, 14.5, 15 16/16 ± , 16, 16.5, 17, 17.5, 18, 18.5, 19, 19.5, 20, 21, 22, 23, 24, 25 15/15 ± EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE (inch) Graduation (inch) Accuracy (1/32" - 5/8") 0.1 (1/64") ± sales@cutwel.net Order Online 24/7 861

63 internal & external gauges (METRIC) FOR INTERNAL MEASUREMENT for measuring bores and internal grooves 838 TI Series IP65 ABS Contact points are made from carbide Absolute measuring instrument Easy to operate, very habile and portable Easy to read tolerance markers IP protection class IP65 according to EN Supplied with: Test certificate range Meb Readings Skw Error limit G Repeatability limit r depth L Groove depth A Groove width B Contact point - length (move.) Hb Contact point - length (fixed) Hf Contact point - ball dia. D force F N (METRIC) FOR EXTERNAL MEASUREMENT to measure thickness and wall thicknesses 838 TA Series IP65 ABS METROLOGY range Meb Readings Skw Error limit G Repeatability limit r depth L Contact point - length (move.) Hb Contact point - length (fixed) Hf Contact point - ball dia. D force F N Contact points are made from carbide Absolute measuring instrument Easy to operate, very habile and portable Easy to read tolerance markers IP protection class IP65 according to EN Supplied with: Test certificate Phone us 8am-6pm for next day delivery

64 internal & external gauges ELECTRONIC FOR INTERNAL MEASUREMENT for measuring bores and internal grooves 838 EI Series IP67 0 TOL ABS USB Digimatic Functions ON/OFF, /inch, TOL (enter tolerance limit values), ABS (display can be set to zero, without losing the reference to the Preset value), DATA (Data transmission via connection cable) range Meb Resolution Skw Error limit G Repeatability limit r depth L Groove depth A Groove width B Contact point - length (move.) Hb Contact point - length (fixed) Hf Contact point - ball dia. D force F N ELECTRONIC FOR EXTERNAL MEASUREMENT to measure thickness and wall thicknesses 838 EA Series IP67 range Meb Resolution Skw Error limit G Repeatability limit r depth L Contact point - length (move.) Hb Contact point - length (fixed) Hf Contact point - ball dia. D force F N TOL ABS USB Digimatic High contrast analog and digital LCD Specified measuring programs according to application Absolute/Relative measuring program Tolerance is displayed with 2 LEDs Data output via USB or Digimatic, optional cable required Energy supply: Battery operation Protection class IP 67 according to EN Supplied with: Instruction manual, Battery, Test certificate Functions ON/OFF, /inch, TOL (enter tolerance limit values), ABS (display can be set to zero, without losing the reference to the Preset value), DATA (Data transmission via connection cable) High contrast analog and digital LCD Specified measuring programs according to application Absolute/Relative measuring program Tolerance is displayed with 2 LEDs Data output via USB or Digimatic, optional cable required Energy supply: Battery operation Protection class IP 67 according to EN Supplied with: Instruction manual, Battery, Test certificate DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 863

65 snap gauges MARAMETER F INDICATING SNAP Excludes Indicator Series 840 F & 840 FC * Further measuring forces are available on request range Repeatability fw µm Distance of moveable anvil force* N For cylindrical parts such as shafts, bolts and spindles, for thickness and length measurements Rugged, forged steel frame with heat insulators spindle is mounted in long guide way with lever-controlled retraction Anvil spindle can easily be fine adjusted spindle and anvil spindle are both made of hardened stainless steel, carbide-tipped or ceramic (840 FC) measuring faces Adjustable center stop for automatic alignment Maximum wear resistance due to non-contact positioning in conjunction with carbide- tipped measuring faces Constant measuring force as a result of built-in spring, thus eliminating user influence Universally applicable and extremely versatile. Each instrument spans a broad measuring range, within this range any dimension and fit can be very quickly and easily adjusted Supplied with: Wooden case, steel flat contact point 903 Flatness µm face Parallelism µm (inch) 840 F 0-25 (0-1") (1-2.36") (2-4") (4-6") (6-8") FC 0-25 (0-1") (1-2.36") MARAMETER S INDICATING SNAP Excludes Indicator Series 840 FS METROLOGY For all kinds of cylindrical work pieces, whether directly on a machine tool or in the production control Rigid frame; convenient handle with heat insulators open on one end to eliminate heat transfer from user s hand Spindles are made of hardened stainless steel and mounted in long guide ways Carbide-tipped measuring faces slightly chamfered at the front to facilitate positioning Projects over width of frame for measurement of narrow registers or when measuring directly at shoulders Maximum accuracy. Straight transfer of spindle movement to indicator. During the measurement, the weight of the gage rests on the anvil spindle Adjustable center stop for automatic alignment Indicating instrument is protected against possible impact during handling by a laterally projecting guard Direct indication and evaluation of measurement results Universally applicable and extremely versatile, each instrument spans a broad measuring range, within this range any dimension and fit can be very quickly and easily adjusted Constant measuring force as a result of built-in spring, thus eliminating user influence Supplied with: Wooden case, allen key range Repeatability Distance of face fw moveable anvil force* µm N Flatness Parallelism (inch) µm µm Weight kg ( ") ( ") (2.36-4") (4-6") (6-8") (8-10") (10-12") (12-14") (14-16") (16-18") (18-20") Phone us 8am-6pm for next day delivery

66 pin & plug gauges PIN GAUGE SETS Made From Steel With Handle Supplied in Wooden Box Grade µm Grade µm DIGITAL CALIPERS Diameter Steps Pin per set GRADE 1 (+1.0µm) DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS PIN GAUGE SET HRc Alloy Steel Series 4166 PLUG GAUGE SETS Made From Steel With Handle, Supplied in Wooden Box EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Diameter Steps Gauges per set SQUARES, LEVELS & PROTRACTORS Diameter Steps Pin per set D S S S S S S S S S MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 865

67 steel slip gauges METROLOGY INDIVIDUAL STEEL SLIP GAUGE BLOCKS Supplied with DKD calibration certificate Grade Application To be used as basic standards in calibration laboratories by skilled inspection staff, to calibrate or set high accuracy measuring instruments, to calibrate gauge blocks of grade 1 and 2. To be used in inspection rooms, to check gauges, inspect high accuracy parts and set measuring instruments. To be used in workshops, to check production gauges, set measuring instruments and mount tools. Nominal Grade 0 Grade 1 Grade 2 Size Nominal Grade 0 Grade 1 Grade 2 Size Phone us 8am-6pm for next day delivery

68 ceramic slip gauges INDIVIDUAL CERAMIC SLIP GAUGE BLOCKS Supplied with DKD calibration certificate Grade Nominal Size Application To be used as basic standards in calibration laboratories by skilled inspection staff, to calibrate or set high accuracy measuring instruments, to calibrate gauge blocks of grade 1 and 2. To be used in inspection rooms, to check gauges, inspect high accuracy parts and set measuring instruments. To be used in workshops, to check production gauges, set measuring instruments and mount tools. Grade 0 Grade 1 Grade Nominal Size Grade 0 Grade 1 Grade DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 867

69 slip gauge sets SLIP GAUGE SETS Available in Alloy Steel or Ceramic Supplied with DKD calibration certificate (German Calibration Service - acceptable in the UK for UKAS calibration). Insize steel slip gauge set Insize ceramic gauge set Mahr steel slip gauge set Mahr ceramic gauge set METROLOGY Blocks Included In Set Size Step Quantity INSIZE MAHR Blocks Per Set Grade 0 STEEL Grade 1 Grade 2 Grade 0 CERAMIC Grade Phone us 8am-6pm for next day delivery

70 plug and ring gauges PLAIN PLUG Series 4124 Specification Supplied with go and no-go gauges together (Class H7) Hardness HRc60 Size Size Size DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS PLAIN RING Series 6312 Specification Supplied with go gauge only (Class H7) Hardness HRc60 EDGE FINDERS ZERO SETTERS Size Size Size GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 869

71 thread gauges METRIC COARSE THREAD Made in Germany Specification Plug gauges supplied with go and no-go gauges together upto M39, and seperate from M42-M68 (Class 6H) Ring gauges supplied with go and no-go gauges seperate (Class 6g) Right & left hand SIZE Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) Right Hand Left Hand Right Hand Left Hand Right Hand Left Hand M1x0.25 JBO-PG JBO-RG JBO-RG M1.1x0.25 JBO-PG JBO-RG JBO-RG M1.2x0.25 JBO-PG JBO-RG JBO-RG M1.4x0.3 JBO-PG JBO-RG JBO-RG M1.6x0.35 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-PG M1.7x0.35 JBO-PG JBO-RG JBO-RG M1.8x0.37 JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M2x0.4 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M2.2x0.45 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M2.3x0.45 JBO-PG JBO-RG JBO-RG M2.5x0.45 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M2.6x0.45 JBO-PG JBO-RG JBO-RG M3x0.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M3.5x0.6 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M4x0.7 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M4.5x0.75 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M5x0.8 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M6x1 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M7x1 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M8x1.25 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M9x1.25 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M10x1.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M11x1.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M12x1.75 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M14x2 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M16x2 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M18x2.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M20x2.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M22x2.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M24x3 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M27x3 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M30x3.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M33x3.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M36x4 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M39x4 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG METROLOGY SIZE Plug Gauge (Go) Ring Gauge (Go) Ring Gauge (No-Go) Right Hand Left Hand Right Hand Left Hand Right Hand Left Hand M42x4.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M45x4.5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M48x5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M52x5 JBO-PG JBO-PG JBO-RG JBO-RG JBO-RG JBO-RG M56x5.5 JBO-PG JBO-RG JBO-RG M60x5.5 JBO-PG JBO-RG JBO-RG M64x6 JBO-PG JBO-RG JBO-RG M68x6 JBO-PG JBO-RG JBO-RG SIZE Right Hand Plug Gauge (No-Go) Left Hand M42x4.5 JBO-PG JBO-PG M45x4.5 JBO-PG JBO-PG M48x5 JBO-PG JBO-PG M52x5 JBO-PG JBO-PG M56x5.5 JBO-PG M60x5.5 JBO-PG M64x6 JBO-PG M68x6 JBO-PG For the latest offers & prices call our sales team phone Phone us 8am-6pm for next day delivery

72 thread gauges METRIC COARSE THREAD Plug and Ring Gauges, Go and No Go Series 4130 & 4120 Specification Plug gauges supplied with go and no-go gauges together (Class 6H) Ring gauges supplied with go and no-go gauges seperate (Class 6g) Standard ISO 1502 Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) SIZE M2x N M2.2x D D D2N M2.5x D D D5N M3x N M3.5x D D D5N M4x N M5x N M6x N M7x N M8x N M9x N M10x N M11x N M12x N M14x N M16x N M18x N M20x N M22x N M24x N M27x N M30x N M33x N M36x N M39x N M42x N M45x N M48x N M52x N M56x N M60x N DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS METRIC COARSE THREAD PLUG GAUGE SET 7PC Set Series 4130 METRIC COARSE THREAD RING GAUGE SET 7PC Set, Go and No Go Series 4120 SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS Go Sizes Included TOOL PRESETTERS CALIBRATION SERVICES Sizes Included M3 x 0.5 (4120-3), M4 x 0.7 (4120-4), M5 x 0.8 (4120-5), M6 x 1 (4120-6), M8 x 1.25 (4120-8), M10 x 1.5 ( ), M12 x 1.75 ( ) No Go 4120-S7 SOFTWARE M3 x 0.5 (4130-3), M4 x 0.7 (4130-4), M5 x 0.8 (4130-5), M6 x 1 (4130-6), M8 x 1.25 (4130-8), M10 x 1.5 ( ), M12 x 1.75 ( ) 4130-S7 M3 x 0.5 (4120-3N), M4 x 0.7 (4120-4N), M5 x 0.8 (4120-5N), M6 x 1 (4120-6N), M8 x 1.25 (4120-8N), M10 x 1.5 ( N), M12 x 1.75 ( N) 4120-S7N sales@cutwel.net Order Online 24/7 871

73 thread gauges METRIC FINE THREAD RING Ring gauges supplied with go and no-go gauges seperate (Class 6g) Standard ISO 1502 METROLOGY Ring Gauge (Go) Ring Gauge (No-Go) Size M2 x B BN M2.2 x D2B D2BN M2.5 x D5D D5DN M3 x D DN M3.5 x D5D D5DN M4 x G GN M5 x G GN M6 x G GN M6 x L LN M7 x G GN M7 x L LN M8 x G GN M8 x L LN M8 x P PN M9 x G GN M9 x L LN M9 x P PN M10 x G GN M10 x L LN M10 x P PN M10 x Q QN M11 x G GN M11 x L LN M11 x P PN M12 x G GN M12 x L LN M12 x P PN M12 x Q QN M12 x R RN M14 x G GN M14 x L LN M14 x P PN M14 x Q QN M14 x R RN M16 x G GN M16 x L LN M16 x P PN METRIC FINE THREAD RING <M150 Made in Germany Available in left or right hand From M1 -M150 Available from stock in Germany (3-5 working days) Ring Gauge (Go) Ring Gauge (No-Go) Size M16 x R RN M18 x G GN M18 x L LN M18 x P PN M18 x R RN M18 x T TN M20 x G GN M20 x L LN M20 x P PN M20 x R RN M20 x T TN M22 x G GN M22 x L LN M22 x P PN M22 x R RN M22 x T TN M24 x L LN M24 x P PN M24 x R RN M24 x T TN M27 x L LN M27 x P PN M27 x R RN M27 x T TN M30 x L LN M30 x P PN M30 x R RN M30 x T TN M30 x V VN M33 x L LN M33 x P PN M33 x R RN M33 x T TN M33 x V VN M36 x P PN M36 x R RN Ring Gauge (Go) Ring Gauge (No-Go) Size M36 x T TN M36 x V VN M39 x P PN M39 x R RN M39 x T TN M39 x V VN M42 x P PN M42 x R RN M42 x T TN M42 x V VN M42 x X XN M45 x P PN M45 x R RN M45 x T TN M45 x V VN M45 x X XN M48 x P PN M48 x R RN M48 x T TN M48 x V VN M48 x X XN M52 x P PN M52 x R RN M52 x T TN M52 x V VN M52 x X XN M56 x P PN M56 x R RN M56 x T TN M56 x V VN M56 x X XN M60 x P PN M60 x R RN M60 x T TN M60 x V VN M60 x X XN View our full range of ring gauges at or ask for a JBO thread gauge catalogue today Phone us 8am-6pm for next day delivery

74 thread gauges METRIC FINE THREAD PLUG Series 4139 Plug gauges supplied with go and no-go gauges together (Class 6H) Standard ISO 1502 Go & No-Go Size M2 x B M2.2 x D2B M2.5 x D5D M3 x D M3.5 x D5D M4 x G M5 x G M6 x G M6 x L M7 x G M7 x L M8 x G M8 x L M8 x P M9 x G M9 x L M9 x P M10 x G M10 x L M10 x P M10 x Q M11 x G M11 x L M11 x P M12 x G M12 x L M12 x P M12 x Q M12 x R M14 x G M14 x L M14 x P M14 x Q M14 x R M16 x G M16 x L M16 x P Go & No-Go Size M16 x R M18 x G M18 x L M18 x P M18 x R M18 x T M20 x G M20 x L M20 x P M20 x R M20 x T M22 x G M22 x L M22 x P M22 x R M22 x T M24 x L M24 x P M24 x R M24 x T M27 x L M27 x P M27 x R M27 x T M30 x L M30 x P M30 x R M30 x T M30 x V M33 x L M33 x P M33 x R M33 x T M33 x V M36 x P M36 x R Go & No-Go Size M36 x T M36 x V M39 x P M39 x R M39 x T M39 x V M42 x P M42 x R M42 x T M42 x V M42 x X M45 x P M45 x R M45 x T M45 x V M45 x X M48 x P M48 x R M48 x T M48 x V M48 x X M52 x P M52 x R M52 x T M52 x V M52 x X M56 x P M56 x R M56 x T M56 x V M56 x X M60 x P M60 x R M60 x T M60 x V M60 x X DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES METRIC FINE THREAD PLUG <M150 Made in Germany Available in left or right hand From M1 -M150 Available from stock in Germany (3-5 working days) HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES View our full range of plug gauges at or ask for a JBO thread gauge catalogue today SOFTWARE sales@cutwel.net Order Online 24/7 873

75 thread gauges UNC THREAD Made in Germany UNF THREAD Made in Germany Specification Plug gauges supplied with go and no-go gauges together upto 1" 3/8, and seperate from 1" 3/4 (Class 2B) Ring gauges supplied with go and no-go gauges seperate (Class 2A) Standard ANSI B1.2 Specification Plug gauges supplied with go and no-go gauges together (Class 2B) Ring gauges supplied with go and no-go gauges seperate (Class 2A) Standard ANSI B1.2 UNC TPI Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) No1 64 JBO-PG JBO-RG JBO-RG No2 56 JBO-PG JBO-RG JBO-RG No3 48 JBO-PG JBO-RG JBO-RG No4 40 JBO-PG JBO-RG JBO-RG No5 40 JBO-PG JBO-RG JBO-RG No6 32 JBO-PG JBO-RG JBO-RG No8 32 JBO-PG JBO-RG JBO-RG No10 24 JBO-PG JBO-RG JBO-RG No12 24 JBO-PG JBO-RG JBO-RG /4" 20 JBO-PG JBO-RG JBO-RG /16" 18 JBO-PG JBO-RG JBO-RG /8" 16 JBO-PG JBO-RG JBO-RG /16" 14 JBO-PG JBO-RG JBO-RG /2" 13 JBO-PG JBO-RG JBO-RG /16" 12 JBO-PG JBO-RG JBO-RG /8" 11 JBO-PG JBO-RG JBO-RG /4" 10 JBO-PG JBO-RG JBO-RG /8" 9 JBO-PG JBO-RG JBO-RG " 8 JBO-PG JBO-RG JBO-RG /8" 7 JBO-PG JBO-RG JBO-RG /4" 7 JBO-PG JBO-RG JBO-RG /2" 6 JBO-PG JBO-RG JBO-RG /8" 6 JBO-PG JBO-RG JBO-RG UNF TPI Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) No JBO-RG JBO-RG No JBO-RG JBO-RG No2 64 JBO-PG JBO-RG JBO-RG No3 56 JBO-PG JBO-RG JBO-RG No4 48 JBO-PG JBO-RG JBO-RG No5 44 JBO-PG JBO-RG JBO-RG No6 40 JBO-PG JBO-RG JBO-RG No8 36 JBO-PG JBO-RG JBO-RG No10 32 JBO-PG JBO-RG JBO-RG No12 28 JBO-PG JBO-RG JBO-RG /4" 28 JBO-PG JBO-RG JBO-RG /16" 24 JBO-PG JBO-RG JBO-RG /8" 24 JBO-PG JBO-RG JBO-RG /16" 20 JBO-PG JBO-RG JBO-RG /2" 20 JBO-PG JBO-RG JBO-RG /16" 18 JBO-PG JBO-RG JBO-RG /8" 18 JBO-PG JBO-RG JBO-RG /4" 16 JBO-PG JBO-RG JBO-RG /8" 14 JBO-PG JBO-RG JBO-RG " 12 JBO-PG JBO-RG JBO-RG /4" 12 JBO-PG JBO-RG JBO-RG /2" 12 JBO-PG JBO-RG JBO-RG /8" 12 JBO-PG JBO-RG JBO-RG /8" 12 JBO-PG JBO-RG JBO-RG METROLOGY UNC TPI Plug Gauge (Go) Ring Gauge (Go) Ring Gauge (No-Go) 1 3/4" 5 JBO-PG JBO-RG JBO-RG JBO-PG JBO-RG JBO-RG /4" 4.5 JBO-PG JBO-RG JBO-RG /2" 4 JBO-PG JBO-RG JBO-RG UNC TPI Plug Gauge (No Go) 1 3/4" 5 JBO-PG JBO-PG /4" 4.5 JBO-PG /2" 4 JBO-PG THREAD IN UNC, UNF, UNEF, TRAPEZOIDAL, WIRE THREADS, CONDUIT More gauges available from stock Special thread forms Special tolerance Pre-plated Coated Left hand Over 10,000 thread gauges available from stock in Germany (3-5 working days) Please ask for a JBO thread gauge catalogue today Phone us 8am-6pm for next day delivery

76 thread gauges UNJF THREAD Made in Germany NPT THREAD Made in Germany Specification Plug gauges supplied with go and no-go gauges together (Class 3B) Ring gauges supplied with go and no-go gauges seperate (Class 3A) Standard ANSI B1.2 UNJF TPI Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) No4 48 JBO-PG JBO-RG JBO-RG No6 40 JBO-PG JBO-RG JBO-RG No8 36 JBO-PG JBO-RG JBO-RG No10 32 JBO-PG JBO-RG JBO-RG No12 28 JBO-PG JBO-RG JBO-RG /4" 28 JBO-PG JBO-RG JBO-RG /16" 24 JBO-PG JBO-RG JBO-RG /8" 24 JBO-PG JBO-RG JBO-RG /16" 20 JBO-PG JBO-RG JBO-RG /2" 20 JBO-PG JBO-RG JBO-RG /16" 18 JBO-PG JBO-RG JBO-RG /8" 18 JBO-PG JBO-RG JBO-RG /4" 16 JBO-PG JBO-RG JBO-RG UNJC THREAD Made in Germany Specification Plug & ring gauges supplied with go & no go gauge (step type) Standard ANSI B NPT TPI Plug Gauge (Go/No-Go) Ring Gauge (Go/No-Go) 1/16 27 JBO-PG JBO-PG /8" 27 JBO-PG JBO-RG /4" 18 JBO-PG JBO-RG /8" 18 JBO-PG JBO-RG /2" 14 JBO-PG JBO-RG /4" 14 JBO-PG JBO-RG " 11.5 JBO-PG JBO-RG /4" 11.5 JBO-PG JBO-RG /2" 11.5 JBO-PG JBO-RG " 11.5 JBO-PG JBO-RG /2" 8 JBO-PG JBO-RG " 8 JBO-PG JBO-RG " 8 JBO-PG JBO-RG NPTF THREAD Made in Germany DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Specification Plug gauges supplied with go and no-go gauges together (Class 3B) Ring gauges supplied with go and no-go gauges seperate (Class 3A) Standard ANSI B1.2 UNJC TPI Plug Gauge (Go/No-Go) Ring Gauge (Go) Ring Gauge (No-Go) No2 56 JBO-PG JBO-RG JBO-RG No4 40 JBO-PG JBO-RG JBO-RG No6 32 JBO-PG JBO-RG JBO-RG No8 32 JBO-PG JBO-RG JBO-RG No10 24 JBO-PG JBO-RG JBO-RG /4" 20 JBO-PG JBO-RG JBO-RG /16" 18 JBO-PG JBO-RG JBO-RG /8" 16 JBO-PG JBO-RG JBO-RG Specification Plug & ring gauges supplied with go & no go gauge (step type) Standard ANSI B NPTF TPI Plug Gauge (Go/No-Go) Ring Gauge (Go/No-Go) 1/16" 27 JBO-PG JBO-RG /8" 27 JBO-PG JBO-RG /4" 18 JBO-PG JBO-RG /8" 18 JBO-PG JBO-RG /2" 14 JBO-PG JBO-RG /4" 14 JBO-PG JBO-RG " 11.5 JBO-PG JBO-RG /4" 11.5 JBO-PG JBO-RG /2" 11.5 JBO-PG JBO-RG " 11.5 JBO-PG JBO-RG SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 875

77 INSPECTION ACCESSORIES granite surface plates MARTOOL GRANITE SURFACE PLATE Series 6900 DIN 876 Made from fine-grain black granite (Diabas) - LAPPED SURFACE Minimal changes in dimension due to temperature changes Grade 00 is for inspection room or lab, grade 0 or 1 is for shopfloor DIN876 Optional accessory: Stand for granite surface plate (code 107Us or 107Ug) Supplied with: Calibration certificate (cabinet not included) Size Weight kg Grade 00 Grade 0 Grade x 250 x x 400 x x 630 x x 500 x x 630 x x 800 x x 1000 x x 1000 x MARTOOL STAND AND CABINET FOR GRANITE SURFACE PLATE Series 107 Ug & 107 Us Height is adjustable by 100 Granite plate sold seperately 107Us Series Cabinet has lockable doors 107 Ug Series Stand 107 Us Series Cabinet Size 107 UG SERIES STAND 630 x 400 x x 630 x x 500 x x 630 x x 800 x x 1000 x x 1000 x US SERIES CABINET 630 x 400 x x 630 x x 500 x x 630 x x 800 x x 1000 x x 1000 x GRANITE SURFACE PLATE 6900 Series DIN 876 STAND FOR GRANITE SURFACE PLATE 6902 Series Height is adjustable by 25 Granite plate sold seperatly METROLOGY Made of granite, free from deterioration or dimensional change overtime, minimal changes in dimension due to temperature changes Grade 00 is for inspection room or lab, grade 0 or 1 is for shopfloor DIN876 Optional accessory: Stand for granite surface plate (code 6902) Supplied with: Calibration certificate Size L x W x H Weight kg Grade 00 Grade x 250 x x 400 x x 500 x x 630 x x 800 x x 1000 x Size W x D x H Compatible Surface Plates 352 x 224 x A and x 280 x A and x 352 x A and x 448 x A and x 560 x A and Phone us 8am-6pm for next day delivery

78 INSPECTION ACCESSORIES v-blocks & parallels MAGNETIC V-BLOCK SET Series 6889 MAGNETIC V-BLOCK Series 6890 Hold cylindrical workpieces for inspection and machining Two V-blocks per set All working surfaces are hardened to HRC60±2 Magnetic force on top, bottom and two V grooves V groove on the top for large shafts / V groove on the bottom for small shafts Suitable for cast iron surface plates and granite surface plates Accuracy 5μm Hold cylindrical workpieces for inspection and machining Supplied in single piece Not hardened Not suitable for steel or cast iron surfaces Accuracy 10μm DIGITAL CALIPERS Size L x W x H Shaft Magnetic Force kgf 75 x 56 x x 70 x x 75 x ROLLER BEARING V-BLOCK SET Series 6888 Size L x W x H Diameter Magnetic Force kgf 70 x 60 x V-BLOCK SET Series 6896 DEPTH MICROMETERS HEIGHT Two V-blocks per set Workpieces don t get damaged due to bearings Suitable for heavy workpieces Parallelism of bearings to bottom (when two V-blocks are closed) 5μm Hold cylindrical workpieces for inspection and machining Hardened to HRC60±2 V groove on the top for large shafts V groove on the bottom for small shafts Parallelism of both V grooves to top and bottom sides: 5μm Squareness of both V grooves to front and back sides: 5μm 3D TESTERS MEASURING TOOL SETS EDGE FINDERS Size L x W x H Shaft Max Load kg INSPECTION MAGNETIC V-BLOCK SET Series x 60 x x 80 x x 100 x Size L x W x H Shaft GRANITE V-BLOCK SET Series 6897 Height difference of a Matched Pair μm 50 x 40 x x 63 x x 80 x ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS For inspection only Accuracy 10μm Made of granite, free from deterioration or dimensional change over time, minimal changes in dimension due to temperature changes SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS Size L x W x H Shaft Magnetic Force kgf 70 x 40 x x 50 x Size L x W x H Shaft Parallelism of V Groove to Bottom & Height Difference of a matched pair µm 70 x 70 x x 70 x SHORE DUROMETERS TOOL PRESETTERS PARALLEL SET Series 6533 Hardened to HRC55-60 Height difference of a matched pair: 5μm Parallelism between top and bottom 5μm CALIBRATION SERVICES SOFTWARE Pairs Length Height (Thickness) , 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 35, 40, 45, sales@cutwel.net Order Online 24/7 877

79 SQUARES 90 squares 90 BEVEL EDGE SQUARE Made of hardened stainless steel Series WIDE BASE SQUARE Made of hardened stainless steel Series 4793 Bevelled edges for inside and outside measurement Satin chrome plating DIN875 grade 0 L L W W Size (L x W) Inside Squareness μm Outside Squareness μm Size (L x W) Inside Squareness μm Outside Squareness μm 150 x x x x BEVELLED EDGE SQUARE WITH WIDE BASE Made of hardened stainless steel Series 4795 DIN875 grade 0 Bevelled edges for inside and outside measurement C L (90 ) Size (L x W) Inside Squareness (a) μm Outside Squareness (b) μm C D H E (90 ) D 50 x W 75 x x H E 150 x METROLOGY 90 FLAT EDGE SQUARE WITH WIDE BASE Made of hardened stainless steel Series 4792 DIN875 grade 0 C L Size (L x W) Inside Squareness (a) μm Outside Squareness (b) μm C D H E (90 ) 50 x H (90 ) W E D 75 x x x x Phone us 8am-6pm for next day delivery

80 60 ) SQUARES 90, 60 & 45 squares 90 MACHINIST SQUARE Made of carbon steel Series SQUARE Made of hardened stainless steel Series 4745 C blade L L L (90 ) C DIGITAL CALIPERS (90 ) D W L (45 ) DEPTH W (45 ) W D H MICROMETERS Size (L x W) W Inside Squareness (a) μm Outside Squareness (b) μm H Thickness of Blade 50 x E Size (L x W) Inside Squareness (a) μm Outside Squareness (b) μm C D H 100 x x HEIGHT 300 x x x x D TESTERS 60 SQUARE Made of hardened stainless steel Series SQUARE WITH WIDE BASE Made of hardened stainless steel Series 4747 MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS L L GRANITE SURFACE PLATES C H C H V-BLOCKS & PARALLELS W L W L (45 ) SQUARES, LEVELS & PROTRACTORS 60 ) W D (45 ) W D E MICROSCOPES & ENDOSCOPES Size (L x W) Inside Squareness (a) μm Outside Squareness (b) μm C D H 100 x Size (L x W) Inside Squareness (a) μm Outside Squareness (b) μm C D H E 100 x HARDNESS TESTERS SHORE DUROMETERS 120 x x x x TOOL PRESETTERS 200 x x CALIBRATION SERVICES SOFTWARE Please visit our website for full specifications sales@cutwel.net Order Online 24/7 879

81 90 MARKING & SETTING levels & combination square DIGITAL LEVEL & PROTRACTOR Aluminium frame with magnetic bottom Series 2170 The display flips over when the unit is upside down The backlight is on automatically when in use, and switches off automatically 15 minutes after use The sea level is permanently set inside the chip, calibration is not needed when batteries are replaced Buttons: ON/OFF, ZERO, absolute and incremental measurement One AAA battery Automatic power off in 5 minutes LEVEL PROTRACTOR 4-ORIENTATION USE Resolution Accuracy 4 x (= /m) at 0 and 90 ±0.1, others ± The display flips over when the bottom faces up COMBINATION SQUARE SET Series 2278 Center head: To locate center of round workpieces, Accuracy: ±0.15 Protractor head: To set the blade at desired angle to an edge of a workpiece, and can be used to measure angles, : 0-180, Accuracy: ±7min. Square head: To set the blade at 90 or 45 to an edge of a workpiece, Accuracy: ±8min for 90 square, ±10min for 45 square Blade: : 300/12", Graduation: 0.5 and 1/32" on front face, 1 and1/64" on back face scriber level 115 square head center head METROLOGY 176 protractor head 305 blade 25 locate center protractor level set 90 set 45 rule and marking Phone us 8am-6pm for next day delivery

82 MARKING & SETTING rules, straight edges and marking gauges STEEL RULE Made of stainless steel Series 7110 CIRCUMFERENCE TAPE Made of stainless steel Series 7114 Graduation: 0.5, 1, 1/64", 1/32", 1/16" Semi-flexible rules with graduation on both front & back Non-glare surface Measure diameter and circumference of pipes, trees, tires, etc. Laser engraved scale (inch) Accuracy 150 (6") ± (8") ± (12") ± (20") ± (24") ± Diameter Circumference DIGITAL CALIPERS DEPTH MICROMETERS STRAIGHT EDGE Made of hardened tool steel Series 7111 CENTRE MARKING GAUGE Series 7205 HEIGHT Check flatness and straightness, as well as for marking Graduation on the bevelled edge Chrome plated 3D TESTERS B MEASURING TOOL SETS A EDGE FINDERS C Ød ZERO SETTERS L A A A Size (AxB) Dia of Shafts Accuracy 100 x ± x ± x ± GRANITE SURFACE PLATES V-BLOCKS & PARALLELS MARKING GAUGE Series 7120 RIGID RULE Series 7113 SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS L 2.2 CALIBRATION SERVICES 25 2 SOFTWARE Graduation Accuracy ± A (L) (inch) Graduation Front (inch) Graduation Back (inch) Accuracy ± A 300 (12") 0.5 (1/32") 1 (1/64") ± A ± A 600 (24") 0.5 (1/32") 1 (1/64") ± A sales@cutwel.net Order Online 24/7 881

83 MARKING & SETTING protractors DIGITAL PROTRACTOR Series 2176 Buttons: ON/OFF, ZERO With Clamping screw to lock the blades Graduation of blade: 1 and 1/32" CR2032 battery Automatic power off UNIVERSAL PROTRACTOR Made of carbon steel Series 2372 Parallax-free reading Supplied with 150 blade Suitable for height gauges 1151 and Ø70 magnifier fine adjustment Size Resolution Accuracy ± Graduation Accuracy ± ' ±0.5' PROTRACTOR Made of stainless steel Series 4797 PROTRACTOR Made of stainless steel Series 4799 Satin chrome plated scale With clamping screw Satin chrome plated scale With clamping screw METROLOGY B C A C B L A Size (A x B) Grad. Acc. C Size (A x B) Grad. Acc. L C 100 x ± x ± x ± x ± x ± x ± x ± x ± x ± x ± Phone us 8am-6pm for next day delivery

84 MARKING & SETTING protractors & levels PROTRACTOR Made of stainless steel Series 4780 Satin chrome plated scale With clamping screw BLOCK LEVEL Series 4903 V-groove on bottom for shafts With transverse vial Supplied with adjusting wrench DIGITAL CALIPERS DEPTH MICROMETERS 199 HEIGHT B A 15 Size (A x B) Graduation Accuracy 85 x ± Size (L) Sensitivity /m A 3D TESTERS MEASURING TOOL SETS PROTRACTOR Made of carbon steel Series 2374 Satin chrome plated EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES =0~50 =50 ~140 V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES =140 ~230 =230 ~320 HARDNESS TESTERS SHORE DUROMETERS Unit: 14 TOOL PRESETTERS fine adjustment CALIBRATION SERVICES 124 SOFTWARE 14 Graduation Accuracy /m ' ±2' sales@cutwel.net Order Online 24/7 883

85 OPTICAL TOOLS digital microscopes MarVision. Workshop Microscope Series MM 320 Manual 2D- Microscope with either fixed, zoom or motorised zoom lens and an automatic edge recognition for simple and precise measurements of bores, angles and distances. Ideal for use on the production line. MM 320 with Grid martrix Navitar Zoom lens (with x magnification) for secure magnification settings LED-transmitted light Stable granite base, max. load 20 kg 4 quadrant LED ring lights Quick setting for fast bridging over large distances Stabile Z column, adjustable range 200 (optional extended by 200) Height adjustment (fine/coarse; on both sides) for precise focusing Fine setting for more accurate positioning INDUSTRY SOLUTIONS Electronics Industry: Circuit boards, resistors, soldering joints etc. Medical Technology: Artificial joints, medical instruments e.g. cannulae/ needles. Plastics: Rigid and flexible components, e.g. gaskets/seals, diaphragms, filters. Metal working: Precision punched and bent components, turned parts, cutting tools, cutting plates etc. Mechanical engineering: Gears, surface finish, burr formation of all types of components. Further applications: Foils, filers, all types of small components. Further measuring ranges: 100 x x x 250 (Incl. Z-axis extensions) Additional options: Telecentric LED back light (Order no ) Incident light (Order no ) Calibration standard incl. calibration certificate (Order no ) Extension of the Z-Axis, 200 (Order no ) system for Z-Axis Wide range of accessories DXF file integration Training Calibration and repair service METROLOGY MARVISION. WORKSHOP MEASURING MICROSCOPE WITH TOUCHSCREEN PC & IMAGE PROCESSING Series MM 320 range: X/Y 200/100 Z travel: 200 table dimensions: 370 x 210 Maximum table load: 20kg Built-in incremental measuring scale MPE E1 X/Y in µm (L in ): 1.9 +(L/100) MPE E2 X/Y in µm (L in ): 2.9 +(L/100) Working distance: 85 Max. height of test piece: 90 Dimensions H x W x D: 700 x 650 x 550 To see the MarVision MM 320 in action, simply scan the QR-Code and watch the Mahr YouTube channel. M3-SOFTWARE WITH TOUCHSCREEN-PC 23" Touchscreen with keyboard and mouse Based on Windows; so it is possible to install additional software Operated via the Multi-Touch on the monitor or via mouse/keyboard Large video image Protocol print out with company logo Automatic edge detection even with low constrast parts Measurement and Evaluation Functions Point intersecting straight lines Lines line of best fit, centreline Circle indexcircle, pitch circle Distance distance between point-point, point-line Angle taken from 2 lines Alignment of axis alaignment of the coordinate system on the test piece Model MM 320 Zoom Lens with Touchscreen PC Magnification 0.7X-4.5X Resolution Illumination LED Incident and transmitted light. Individually adjustable Phone us 8am-6pm for next day delivery

86 OPTICAL TOOLS digital microscopes Digital Metrology Microscopes ISM-PM Series with ISM Pro software for Digital Microscopes Measurement: USB Stand measure length of line or distance between two points measure angle with three points measure length of continuous line A add text measure radius, length and angle of arc measure distance between two parallel lines Take picture button measure distance between two circles measure distance between point and line measure area of rectangle I measure radius, girth and area of circle measure angle with two lines add number with circle DIGITAL CALIPERS DEPTH Illumination adjustment Focus adjustment Edge detection measurement: detect line automatically, and calculate length detect arc automatically, and calculate radius, angle and arc length detect two lines automatically, and calculate angle detect circle automatically, and calculate radius, girth and area detect two parallel lines automatically and calculate distance MICROMETERS HEIGHT Magnification adjustment Comparison: Create line, angle or circle with desired size, to compare with workpieces create line create circle with tolerance create angle Data export to CAD or Excel: 3D TESTERS MEASURING TOOL SETS White/black plate EDGE FINDERS R=0.196m m ZERO SETTERS SHORT FOCUS DISTANCE Series ISM-PM200SB HIGH MAGNIFICATION Series ISM-PM600SB LONG FOCUS DISTANCE Series ISM-PM160LA GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Calibration rule (graduation 0.1) Focus support ring Calibration rule (graduation 1) Calibration rule (graduation 0.1) Calibration rule (graduation 0.1) Calibration rule (graduation 1) SQUARES, LEVELS & PROTRACTORS Supplied with: Digital microscope, Stand, White/black plate, Software disc, Focus support ring for 80X/150X, Calibration rule (graduation 0.1), Calibration rule (graduation 1.0) Measures and magnifies Can take pictures and videos Magnification 10X-200X Magnification Focus Distance View Field Accuracy Model 50X x µm 100X x µm 150X x µm 200X x 1.5 8µm ISM-PM200SB Short Focus Distance Supplied With: Digital microscope, Stand, White/black plate, Software disc, Calibration rule (graduation 0.1) Measures and magnifies Can take pictures and videos Magnification 450X-600X Magnification Focus Distance View Field Accuracy 450X x µm 500X x µm 550X x µm 600X x µm ISM-PM600SB High Magnification Supplied With: Digital microscope, Stand, White/black plate, Software disc, Calibration rule (graduation 0.1), Calibration rule (graduation 1.0) Measures and magnifies Can take pictures and videos Magnification 35X-160X Magnification Focus Distance View Field Accuracy 50X x µm 100X x µm 160X x µm ISM-PM160LA Long Focus Distance Magnification 10X-200X 450X-600X 35X-160X Pixel 2M (resolution: 1600 x 1200) 2M (resolution: 1600 x 1200) 2M (resolution: 1600 x 1200) Illumination built-in adjustable LED built-in adjustable LED Built-in adjustable LED Power Supply USB 2.0 cable (voltage required: 5±0.1V) USB 2.0 cable (voltage required: 5±0.1V) USB 2.0 cable (voltage required: 5±0.1V) ISM-PM200SB ISM-PM600SB ISM-PM160LA MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 885

87 OPTICAL TOOLS portable microscopes WIRELESS DIGITAL MEASURING MICROSCOPE Measures and magnifies Series ISM-WM200 Can take pictures and videos Supplied with measuring software (basic version) Wireless *between digital microscope and receiver Magnification 10X - 200X Pixel 0.35M(resolution: 720x480) Calibration rule Stand Magnification Focus distance View field Accuracy μm 60X x X x X x X x Max. transmission distance* Illumination Power supply Digital microscope Stand ISM-WM200-STAND Receiver Focus support ring for 80X/150X Focus support ring for 60X/200X Calibration rule graduation 0.1 Calibration rule graduation 1 Software disc AC/DC adapter 5m built-in adjustable LED built-in rechargeable battery 1pc Optional accessory 1pc 1pc 1pc 1pc 1pc 1pc 1pc ISM-WM200 PORTABLE MEASURING MICROSCOPE Measures and magnifies Series ISM-PM100 METROLOGY Total magnification 100X Eyepiece 10X with graduation Objective(achromatic) 10X(numerical aperture: 0.25) Working distance 7 Focus range 30 Viewing field Ø1.8 Graduation 0.01 Illumination LED light, filed is adjustable Diameter of base Ø63 Height 210 Weight 650g Main unit 1pc Pen light 1pc Battery SR44 or LR44 3pcs ISM-PM Phone us 8am-6pm for next day delivery

88 OPTICAL TOOLS endoscopes PORTABLE ENDOSCOPE WITH SCREEN Series ISV-E55 Flexible cable length: 1m Video Format PAL or NTSC Memory 2G SD card 3.5" LCD USB port Power on/off Power Supply Weight Main unit Cable with camera Rechargeable Battery 450g 1pc 1pc Camera with adjustable LED light SD card Video output LED brightness adjustment Take picture Take video SD card 2G 1pc 45 mirror 1pc Spare battery AC/DC adapter Video output cable USB cable 1pc 1pc 1pc 1pc DIGITAL CALIPERS DEPTH MICROMETERS Focus distance: Angle of view: 134 CAMERA diameter 5.5 pixel 0.3M resolution 640 x 480 HEIGHT mirror (optional) 45 mirror (included) 60 mirror (optional) frame rate waterproof 30 fps IP57 ISV-E55 3D TESTERS 35 Mirror: ISV-E55-M35 60 Mirror: ISV-E55-M60 OPTIONAL ACCESSORIES MEASURING TOOL SETS EDGE FINDERS USB ENDOSCOPE Series ISV-E55C ZERO SETTERS Focus distance: Angle of view: 134 Computer is not included GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Take video Take picture 35 mirror (optional) LED brightness adjustment 45 mirror (optional) Semi-rigid cable length: 1m 60 mirror (optional) Lens with adjustable LED light Power Supply USB Weight 150g Main unit 1pc Cable with camera 1pc Software CD 1pc CAMERA diameter 5.5 pixel 0.3M resolution 640x480 frame rate 30fps waterproof IP57 ISV-E55C SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE OPTIONAL ACCESSORIES 35 Mirror: ISV-E55-M35 45 Mirror: ISV-E55-M45 60 Mirror: ISV-E55-M60 sales@cutwel.net Order Online 24/7 887

89 TESTING hardness testers BRINELL/ROCKWELL/VICKERS HARDNESS TESTER Series ISH-BRV Rockwell display Load/unload handle Ø60 flat anvil for Rockwell Ø150 flat anvil for Rockwell V-anvil for Rockwell V-anvil for Vickers & Brinell Ø60 flat anvil for Vickers & Brinell Microscope 15X eyepiece Supplied With: - 1/16" DIA ball Rockwell indenter - Diamond Rockwell indenter - Ø60 & Ø150 flat anvil for Rockwell - V-anvil for Rockwell - Flat anvil for Vickers and Brinell - Ø5 & Ø2.5 Brinell indenter - V-anvil for for Vickers and Brinell - Rockwell test block HRC (high, low) - Rockwell test block HRB - Brinell test block - Vickers test block - Vickers indenter Graduation Objective 2.5X/5X Slider Rockwell Test Load N 98 preload, 588, 980, 1471 total load Minimum Rockwell Reading HR 0.5 Brinell Test Load N 306, 613, 1839 Vickers Test Load N 294 Stage Elevation Manual Load Control Manual Magnification of Microscope 37.5X/75X (selectable) Maximum Workpiece h/d 180/200 Dimensions 546 x 300 x 767 Weight kg 90 ISH-BRV Stage Test force dial Choose hardness scale AUTOMATIC DIGITAL ROCKWELL HARDNESS TESTER Series ISH-MRD200 USB Charger port USB port Operation panel Ø60 flat anvil for Rockwell Ø150 flat anvil for Rockwell V-anvil for Rockwell Ball indenter Diamond indenter Supplied with: METROLOGY - Main unit - Ø60 & Ø150 flat anvil - V-type anvil - Diamond indenter - Ø carbide ball indenter - Hardness test block HRB85-95 Hardness Scale (Standard Indenters) Hardness Scale (Optional Indenter) Preliminary Test Force Test Force Stage Elevation Load Control Load Dwell Time - Hardness test block HRC Hardness test block HRC Anti-dust cover - USB cable and software - AC/DC adapter HRA, HRB, HRC, HRD, HRF, HRG HRE, HRH, HR 98N 588N, 980N, 1471N Manual Automatic (load/dwell/unload) 0-99 second Resolution HR 0.1 Data Output Wireless and USB Maximum Workpiece height/depth 170/165 Display Unit Power Supply Built-in rechargeable battery Dimensions 520 x 160 x 700 Weight kg 60 ISH-MRD200 Indenter Stage Start button Test force dial Load dwell time adjustment Phone us 8am-6pm for next day delivery

90 TESTING hardness testers MANUAL ROCKWELL HARDNESS TESTER Series ISH-R150 Ø60 flat anvil for Rockwell Ø150 flat anvil for Rockwell V-anvil for Rockwell Supplied with: - Main unit - Ø60 & Ø150 flat anvil - V-type anvil - Diamond indenter - 1/16" DIA ball indenter - Hardness test block HRB Hardness test block HRC Hardness test block HRC20-30 Indenter DIGITAL CALIPERS DEPTH Stage MICROMETERS Hardness Scale HRA, HRB, HRC, HRD, HRF, HRG Preliminary Test Force N 98 Test Force N 588, 980, 1471 Test force dial HEIGHT Display Analogue Stage Elevation Manual Load Control Manual Minimum Reading HR 0.5 Maximum Workpiece h/d 170/165 Load/unload handle 3D TESTERS Dimensions 520 x 160 x 700 Weight kg 60 ISH-R150 MEASURING TOOL SETS EDGE FINDERS AUTOMATIC ROCKWELL HARDNESS TESTER Series ISH-MR150 ZERO SETTERS Ø60 flat anvil for Rockwell Ø150 flat anvil for Rockwell Supplied with: - Main unit - Ø60 & Ø150 flat anvil - V-type anvil - Diamond indenter - 1/16" DIA ball indenter - Hardness test block HRB85-95 V-anvil for Rockwell - Hardness test block HRC Hardness test block HRC20-30 Indenter GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES Hardness Scale HRA, HRB, HRC, HRD, HRF, HRG Stage HARDNESS TESTERS Preliminary Test Force N 98 Test Force N 588, 980, 1471 Test force dial SHORE DUROMETERS Display Analogue Stage Elevation Manual Load Control Automatic (load/dwell/unload) Load Dwell Time Second 1-99 Start button Load dwell time adjustment TOOL PRESETTERS CALIBRATION SERVICES Minimum Reading HR 0.5 Maximum Workpiece h/d 170/165 SOFTWARE Dimensions 520 x 160 x 700 Weight kg 60 ISH-MR150 sales@cutwel.net Order Online 24/7 889

91 TESTING hardness testers PORTABLE HARDNESS TESTER Series ISH-SPHD USB Printer (Included) Hardness Test Block (Included) Small Support Ring (Included) Supplied with: - Bluetooth printer - Hardness test block - Small support ring - Cleaning brush - AC/DC adapter - USB cable and software Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC and HRB), hore (HS) and tensile strength (MPa) Automatic direction correction Connected to printer via bluetooth Connected to computer via USB Up to 500 test results can be saved According to ASTM A 956 ACCESSORIES (optional) COUPLANT: ISH-COUPLANT SUPPORT RINGS: Visit Minimum Reading 1HLD, 1HV, 1HB, 0.1HRC, 0.1HRB, 1HS, 1HS Accuracy ±6HLD (when HLD = 800) Output Bluetooth and USB Power Supply Built-in Rechargeable Battery Dimensions 147 x 35 x 22 ISH-SPHD PORTABLE HARDNESS TESTER Series ISH-PHB Printer (Optional) Hardness Test Block (Included) Small Support Ring (Included) METROLOGY Supplied with: - Impact device D - Hardness test block - Small support ring - Cleaning brush Set measurement times (1-9) to have average value Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC and HRB), Shore (HS) and tensile strength (MPa) Memory of 99 measurement values for browsing Connected with printer via bluetooth Automatic power off According to ASTM A 956 ACCESSORIES (optional) WIRELESS PRINTER: ISH-DS-PRINTER COUPLANT: ISH-COUPLANT SUPPORT RINGS: Visit Minimum Reading 1HLD, 1HV, 1HB, 0.1HRC, 0.1HRB, 1HS, 1MPa Accuracy ±6HLD (when HLD = 800) Display Leeb(HLD), converted hardness, material, impact direction, test times, average value, date Output Bluetooth Power Supply 3 x AAA batteries Dimensions 150 x 80 x 24 ISH-PHB Phone us 8am-6pm for next day delivery

92 TESTING hardness testers PORTABLE HARDNESS TESTER Series ISH-SPHA USB Printer (Included) Hardness Test Block (Included) Small Support Ring (Included) Supplied with: - Impact device D - Bluetooth printer - Hardness test block - Small support ring - USB cable and software Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC and HRB), hore (HS) and tensile strength (MPa) Up to 800 test results can be saved Low and high limits with judgement Touch screen operation, large display with backlight DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT ACCESSORIES (optional) IMPACT DEVICES DC: ISH-SPHA-DC C: ISH-SPHA-C D+15: ISH-SPHA-D15 DL: ISH-SPHA-DL G: ISH-SPHA-G HARDNESS TEST BLOCK*: ISH-BHLG COUPLANT: ISH-COUPLANT *For Impact Device G use Hardness Test Block ISH BHLG below. For all other impact devices use the supplied Hardness Test Block SUPPORT RINGS: Visit Minimum Reading 1HL, 1HV, 1HB, 0.1HRC, 0.1HRB, 1HS, 1MPa Accuracy ±6HLD (when HLD = 800) Display Leeb(HLD), Converted Hardness, Material, Impact Direction, Test Times, Average Value, Deviation, Time Output Bluetooth and USB Power Supply Built-in Rechargeable Battery Dimensions 135 x 83 x 24 ISH-SPHA-K 3D TESTERS MEASURING TOOL SETS EDGE FINDERS PORTABLE HARDNESS TESTER Series ISH-PHA ZERO SETTERS Printer (Included) Hardness Test Block (Included) Small Support Ring (Included) GRANITE SURFACE PLATES V-BLOCKS & PARALLELS Supplied with: - Impact device D - Bluetooth printer - Hardness test block - Small support ring - Cleaning brush - AC/DC adapter Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC and HRB), Shore (HS) and tensile strength (MPa) Connected with printer via bluetooth LCD display with backlight Automatic power off ACCESSORIES (optional) COUPLANT: ISH-COUPLANT SUPPORT RINGS: Visit Minimum Reading 1HLD, 1HV, 1HB, 0.1HRC, 0.1HRB, 1HS, 1MPa Accuracy ±6HLD (when HLD = 800) Display Leeb(HLD), converted hardness, material, impact direction, test times, average value, date Output Bluetooth Power Supply 3 x AAA batteries Dimensions 150 x 80 x 24 ISH-PHA-K SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 891

93 TESTING durometers DIGITAL SHORE DURMOMETER Series ISH-DSA/DSD USB Printer (Optional) Calibration Block (Included) Supplied with: - Calibration block - AC/DC adapter - USB cable and software According to ISO868, ISO7619, ASTM D 2240 Average and peak (max.) mode Dwell time is adjustable Low and high limits with judgement 500 memories Wireless connection to printer Handheld use or with test stand (ISH-DS-STAND) Automatic Power off Blunt taper indenter ISH-DSA-P Sharp point indenter ISH-DSD-P * Use ISH-DSA-P when measuring result is less than 20HD Use ISH-DSD-P when measuring result is more than 90HA ACCESSORIES (optional) PRINTER: ISH-DS-PRINTER TEST STAND: ISH-DS-STAND WEIGHTS 1kg for use with ISH-DSA-P Durometer: ISH-DSA-W1 5kg for use with ISH-DSD-P Durometer: ISH-DSD-W5 Test Material Soft Plastic, Soft Rubber, etc. Hard Plastic, Hard Rubber, etc. * 0-100HA 0-100HD Resolution 0.1HA 0.1HD Accuracy ±1HA ±1HD Indenter Protrusion 2.5 Output USB and Wireless Power Supply Built-in Rechargeable Battery Dimensions 153 x 50 x 29 ISH-DSA-P ISH-DSD-P STAND FOR SHORE DURMOMETER Series ISH-DS-STAND Load Handle 1kg Weight for ISH-DSA P (Optional) Column 5kg Weight for ISH-DSD P (Optional) METROLOGY Supplied with: - Testing stand - Durometer supporter Can perform repeatable hardness measurement due to fewer possibilities of human error or measurement variations Optional 1kg weight is for use with ISH-DSA-P Durometer Optional 5kg weight is for use with ISH-DSD-P Durometer Stage Diameter 88 Maximum Workpiece Height 75 Dimensions 125 x 163 x 350 Weight kg 4 ISH-DS-Stand DUROMETER IS NOT INCLUDED Durometer Supporter Stage ACCESSORIES (optional) WEIGHTS 1kg for use with ISH-DSA-P Durometer: ISH-DSA-W1 5kg for use with ISH-DSD-P Durometer: ISH-DSD-W Phone us 8am-6pm for next day delivery

94 TESTING durometers SHORE DURMOMETER Series ISH-S30 According to ISO868, ISO7619, ASTM D 2240 With peak value indicator Handheld use or with test stand (ISH-OS2) DIGITAL CALIPERS DEPTH MICROMETERS * Use ISH-S30A when measuring result is less than 20HD Use ISH-S30D when measuring result is more than 90HA Blunt taper indenter ISH-S30A Sharp point indenter ISH-S30D HEIGHT Test Material Soft Plastic, Soft Rubber, etc. Hard Plastic, Hard Rubber, etc. * 0-100HA 0-100HD Resolution 1HA 1HD Accuracy ±0.5HA ±0.5HD Indenter Protrusion 2.5 Bezel Diameter 57 Overall Height 121 ISH-S30A ISH-S30D STAND FOR SHORE DURMOMETER Series ISH-OS2 Column 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES 4kg Weight for ISH-S30D (Optional) Calibration Block (Included) V-BLOCKS & PARALLELS Supplied with: - Testing stand - Calibration block - 1kg weight Can perform repeatable hardness measurement due to fewer possibilities of human error or measurement variations Special structure for stable loading Included 1kg weight is for use with ISH-S30A Durometer Optional 4kg weight is for use with ISH-S30D Durometer *From test point to column Stage Diameter 98 Maximum Workpiece Height 180 1kg Weight for ISH-S30A (Included) DUROMETER IS NOT INCLUDED Load Handle SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS Maximum Workpiece Depth 115* Dimensions 200 x 500 CALIBRATION SERVICES Weight kg 18 ISH-OS2 SOFTWARE Stage ACCESSORIES (optional) WEIGHTS 4kg for use with ISH-S30D Durometer: ISH-OS2-W4 sales@cutwel.net Order Online 24/7 893

95 PRE-SETTING tool presetters Why use a tool presetter? Tool pre-setting is a cost-effective investment for increasing production, assuring quality, maximising machine uptime and reducing scrap. Compared to other tool setting methods, pre setting is one of the easiest ways of reducing machine downtime. M.CONTI TOOL PRESETTERS M.Conti tool pre-setters are 100% manufactured in Italy since 1973 with rugged built-to-last construction. All M.Conti tool pre-setters are made from heat treated steel and ground steel proven to maintain parallism and accuracy for many years. X and Z axis movement is on preloaded linear guides with recirculating ball bearings. M. CONTI TOOL PRESETTER Series P368M P368M is the first step towards precise tool measurements but it is also the perfect support for those who already have a presetter in their tool room. It is an extremely precise and solid presetter which makes measuring tool radius/diameter and height extremely easy. Supplied with interchangeable tool sleeves and can measure different tools always with maximum precision. The high resistance steel base and the battery operated displayed allow the P368M to be placed anywhere with maximum flexibility. M. CONTI TOOL PRESETTER Series P384M The P384 is an entry level presetter with high end specification and performance. Tool radius/diameter andheight measurement is carried out on a dial indicator with high precision probe. This feature permits accurate measuring without the risk of damaging more delicate tools. The display allows an easy management of the machine origins and tool data thanks to the high memory capacity. METROLOGY Resolution: 0.01 Repeatability: 0.01 Display: LCD Auto Off Timer Measurement: Mechanical Height, Diameter, Radius Cones: ISO25-50, HSK, VDI, Straight Power: Battery Resolution: 0.01"/0.001 Repeatability: 0.01 Display: LCD Auto Off Timer Measurement: Dial indicator with probe Height, Diameter, Radius Print out: Tool List and label printing Cones: ISO25-50, HSK, VDI, Straight Run out measurement Tool library: 10,000 Machine origins: 100 Power: 230v Max Height Max Diameter Weight kg P368M.3 P368M.4 P368XM.3 P368MEGA Max Height Max Diameter Weight kg P384M.3 P384M Phone us 8am-6pm for next day delivery

96 PRE-SETTING tool presetters ONLINE POST PROCESSING LEADER & SP40 Both the LEADER and SP40 Series tool presetters offer online post processing capabilities. Online post processing allows you to transfer data from the tool presetter over your local area network direct to your machine. No risk of data input error Save time inputting tool pre-sets Set tools for future jobs Post processing reduces set up times and increases your profitability. DIGITAL CALIPERS DEPTH M. CONTI TOOL PRESETTER Series LEADER The LEADER can substantially reduce production costs by cutting machine set-up time. Anyone can check shape and dimensions of tools and inserts with the user friendly software. Interchangeable tool sleeves require only one quick move and a few seconds for perfect tool centering. The high definition camera shows tool profiles and surfaces with micrometric precision. M. CONTI TOOL PRESETTER Series SP 40 The SP40 line of presetters was created to supply a high performance instrument for an increasingly demanding market. Extreme precision and high performance for tools up to 1,000 high. As always, in M.CONTI tradition, the software interface is easy and user friendly. Anyone can check tool parameters easily and efficiently. The high definition camera has micrometric precision, it captures profiles and tool geometry. The LED lighting system makes it also possible to view tool and insert surfaces with great clarity and crisp definition. MICROMETERS HEIGHT 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES HARDNESS TESTERS Resolution: X= Z=0.001 Repeatability: 0.01 Display: 17" Colour monitor (touch screen optional) Auto Off Timer Measurement: High Resolution C-MOS camera Height, Diameter, Radius Run out measurement Tool library: 20,000 Machine origins: 200 Auto height/diameter identification Real view Print out: Label printer/colour laser printer A4 USB output: 7 USB ports Fine adjustment Screenshot (PDF output) Cones: ISO25-50, HSK, VDI, Straight Power: 230v Post Processor/Connect to multiple machines: Optional Profile projection Resolution: X= Z=0.001 Repeatability: 0.01 Display: 19" Colour monitor (touch screen optional) Auto Off Timer Measurement: C-MOS HD camera with telecentric lenses Height, Diameter, Radius Run out measurement Tool library: 20,000 Machine origins: 200 Auto height/diameter identification Real view Print out: Label printer/colour laser printer A4 USB output: 7 USB ports Fine adjustment Screenshot (PDF output) Cones: ISO25-50, HSK, VDI, Straight Power: 230v Post Processor/Connect to multiple machines Profile projection SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE Max Height Max Diameter Weight kg LEADER33 LEADER35 LEADER53 LEADER55 Max Height Max Diameter Weight kg SP40.06 SP40.08 SP40.10 sales@cutwel.net Order Online 24/7 895

97 CALIBRATION UKAS UKAS CALIBRATION LIST DEPTH MICROMETERS MICOMETERS SETTING RODS HEIGHT DEPTH GAUGE SIZE 0-25 CALBDM CALBDM CALBDM CALBDM300 SIZE CALBROD CALBROD CALBROD CALBROD CALBROD600 SIZE <300 CALBH300 <450 CALBH450 <600 CALBH600 <1000 CALBH1000 SIZE <150 CALBD150 <300 CALBD300 <600 CALBD600 OUTSIDE MICROMETERS OUTSIDE MICROMETERS WITH INTERCHANGABLE ANVILS RULES PAIR OF PARALLELS SIZE CALBM CALBM CALBM300P SIZE <100 CALBMIA100 <200 CALBMIA200 <300 CALBMIA300 <400 CALBMIA400 <500 CALBMIA500 <1000 CALBMIA1000 SIZE 150 CALBSR150R 300 CALBSR CALBSR CALBSR CALBSR1000 SIZE CALBPP CALBPP CALBHPP450 SCREW THREAD MICROMETERS MICOMETERS & SETTING RODS STRAIGHT EDGE SQUARES SIZE Any CALBMS200 SIZE CALBM100CMSET CALBM200CMSET CALBM400CMSET 400+ CALBM400CMSETP SIZE 300 CALBSE CALBSE CALBSE CALBSE CALBSE1200 SIZE CALBSQ CALBSQ CALBSQ1200 PIN SETS INSIDE MICOMETERS CALIPERS DIAL TEST METROLOGY SIZE Set of 50 Set of 75 Set of 100 Set of 150 Set of 200 CALBPIN50 CALBPIN75 CALBPIN100 CALBPIN150 CALBPIN200 PLAIN RING SIZE <300 CALBIM300 THREAD - RING / PLUG SIZE <300 CALBC300 <450 CALBC450 <600 CALBC600 <900 CALBC900 <1000 CALBC1000 <1200 CALBC1200 <1500 CALBC1500 <1800 CALBC1800 <2400 CALBC2400 SIZE Standard CALB-DI SIZE SIZE <150 CALBSR50 >150 CALBSR150 Any CALB-TG Phone us 8am-6pm for next day delivery

98 SOFTWARE MarCom MARCOM PROFESSIONAL SOFTWARE 4.0 MarCom software enables you to transmit data quickly and easily from a measuring instrument to a PC. USB RS232C Digimatic FM RADIO INTEGRATED Trouble free connection... All Mahr measuring instruments with USB, RS232, Digimatic, Wireless FM Radio or Integrated Wireless interfaces can be connected; simply extend the measuring workplace with USB Hubs. Connect up to 100 measuring instruments Flexible data transmission Regardless of whether you are using a foot switch, directly on a measuring instrument, with a Timer function or with a PC keyboard: MarCom is extremely flexible and enables freely configurable measuring cycles. MarCom Professional Software MarCom Standard Software 3.1* * MarCom standard same as professional except that it only has one USB and one serial COM interface. For Mahr measuring instruments, including... Calipers DIGITAL CALIPERS DEPTH MICROMETERS HEIGHT No Interface Box Data acquisition with MarCom Professional 4.0 Doesn't require an interface box Data acquisition via SPC software With boxemulation from MarCom Professional 4.0. simply connect your Mahr measuring instruments, select an MUX 50 compatible interface box in your SPC software, you can then obtain the measured values from all the connected Mahr measuring instruments. Simple acquisition in Microsoft Office Excel Whether you use an existing Excel template or you wish to create a customized template, the cell controller from MarCom is highly flexible. Micrometers Height Gauges 3D TESTERS MEASURING TOOL SETS EDGE FINDERS ZERO SETTERS GRANITE SURFACE PLATES V-BLOCKS & PARALLELS SQUARES, LEVELS & PROTRACTORS MICROSCOPES & ENDOSCOPES : Measured values can be directly transferred into either Microsoft Office Excel (from version 97), into a text file or as a key code. The measured values from each instrument can be sent to a different column, table or folder in Excel. Data transmission is possible via wireless transmission (connect up to 8 instruments per i-stick, max. 4 i-sticks), USB and 2 serial COM interfaces. USB hub is also suitable as a measuring instrument interface. Connect up to 100 measuring instruments. Clear portrayal of the chosen measuring instrments with the aid of icons. Several foot switches can be connected up and freely assigned in conjunction with USB measuring instruments. Individually define and configure measurement cycles. Indicators HARDNESS TESTERS SHORE DUROMETERS TOOL PRESETTERS CALIBRATION SERVICES SOFTWARE sales@cutwel.net Order Online 24/7 897