S_Cal PRO. Professionnal Caliper DESCRIPTION

Transcription

1 HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains a leader in this market and offers a range of calipers with digital read-out of a measurement capacity from 150 to Other handtools complete this range. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C /inch selection 7

2 Professionnal Caliper DESCRIPTION S_Cal PRO Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected utomatic wake-up by moving the electronic on his frame. (system S.I.S) Sleeping mode after 20 min. of no use. (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and ground Thumb wheel on request (see accessories) Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 7 S_Connect Proximity Thickness of frame 3.5 Simple and intuitive functions * description on page 5 8

3 Professionnal Caliper DIMENSIONL DRWING S_Cal PRO TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E 16 x x x x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP67 with or without connector S_Connect : Proximity US / RS232 / Wireless 2) Zero setting Smart Inductive Sensor > 100 : 30 µm / DIN 862 2) see cables chapter 9

4 Micron Caliper DESCRIPTION S_Cal PRO µm Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected utomatic wake-up by moving the electronic on his frame. (system S.I.S) Sleeping mode after 20 min. of no use. (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and ground Improved parallelism of internal jaws compared to version S_Cal PRO Preset Resolution 0,001 or 0, µm repeatability Digital display LCD, Height of digits 7 1 µm resolution S_Connect Proximity Thickness of frame 3.5 Simple and intuitive functions 4µm repeatability * description on page 5 10

5 Micron Caliper DIMENSIONL DRWING S_Cal PRO µm TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E Depth rod Protection rating according to IEC S_Connect : Proximity Functions Smart Inductive Sensor < 100 : 15 µm / > 100 : 30 µm / DIN 862 2) see cables chapter x x x 1.4 Ø1.5 IP67 with or without connector US / RS232 / Wireless 2) /inch, preset, zero setting 11

6 Workshop caliper S_Cal WORK DESCRIPTION Maximum speed of displacement : 2 m/sec Mechanical frame in stainless steel, hardened and ground utomatic switch off mode Thumb wheel on request (see accessories) S_Connect Opto Liquid resistant frame Digital display LCD, Height of digits

7 Workshop caliper S_Cal WORK DIMENSIONL DRWING TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E 16 x 3 16 x 3 16 x 3 16 x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP54 with or without connector S_Connect : Opto US / RS232 / Wireless 2) Zero setting REL and S functions > 100 : 30 µm / DIN 862 2) see cables chapter 13

8 Workshop caliper S_Cal ONE DESCRIPTION Maximum speed of displacement : 2 m/sec Mechanical frame in stainless steel, hardened and ground Thumb wheel on request (see accessories) Modern design Large digits Liquid resistant frame Digital display LCD, Height of digits

9 Workshop caliper S_Cal ONE DIMENSIONL DRWING Ø1.5 E E D 4x C TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E 16 x 3 16 x 3 Depth rod 4 x 1.4 Ø1.5 Thumb wheel device optional Zero setting > 100 : 30 µm / DIN

10 S_Cal SIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate (S_Cal PRO µm) PPLICTIONS Depth measurement S_Cal with kit Depth measurement of small internal Ø S_Cal PRO µm Comparison measurement CCESSORIES S_Cal PRO S_Cal WORK S_Cal ONE ccessory kit for S_Cal 16

11 S_Cal CCESSORIES S_Cal PRO S_Cal PRO µm S_Cal WORK S_Cal ONE ase for Depth Measurement Thumb wheel Thumb wheel Thumb wheel 17

12 Ultra light caliper DESCRIPTION S_Cal UL Maximum speed of displacement : 1.5 m/sec Internal and external measurement This system ensures a perfect guidance and protects the beam against shocks Displays the upper and lower tolerances Extremely light instrument Tungsten carbide internal pins Ø 5 Movable jaw from ULIII 1000 Digital display LCD, Height of digits 8.5 Hollowed section aluminium beam reinforced by two stainless steel rods. Measuring scale resistant to liquid Constant pressure device for internal and external measurements 3m = 3kg Stainless steel external jaws, thickness 7, titanium coated

13 Ultra light caliper DIMENSIONL DRWING S_Cal UL TECHNICL SPECIFICTIONS Measuring range Max.Error µm Repeatability µm fi x C mobile Weight kg S_Connect : Opto US / RS232 / Wireless 2) Setting by PC Memory set 2 references RESET function Min/Max function Tolerance limit indicators on request 2) see cable chapter 19

14 Ultra light caliper SPECIL EXECUTIONS SPECIL JWS TYPE S_Cal UL L K M L TECHNICL SPECIFICTIONS Special jaws (pair) Lenght L to specify with order (max 400 ) L M L - 25 UL 300 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000 UL specification Max. error. [μm] / Repeatability [μm] With Jaws / / / / / / / 40 With Jaws / / / / / / / 50 With Jaws / / / / / / K

15 Ultra light caliper S_Cal UL SPECIL EXECUTIONS SPECIL JWS TYPE C L K x10 M 32 7 N L 15.5 Ø8 COUPE - TECHNICL SPECIFICTIONS Special jaws (pair) Lenght L to specify with order (max 300 ) L max 300 M L - 25 N 80 // µm 150 = 60 / 200 = 80 / 300 = 100 UL 300 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000 UL specification Max. error. [μm] / Repeatability [μm] With Jaws / / / / / / / 30 With Jaws / / / / / / / 40 With Jaws / / / / / / / K

16 S_Cal UL SIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for ULIII up to 1500 PPLICTIONS Special S_Cal UL with modified measuring jaws. Special S_Cal UL with extended measuring jaws. S_Cal UL, movable left jaw 22

17 S_Cal UL CCESSORIES UL Ø D Ø6.5 Thread anvils holders for thread measurement., (pair) Ø3.5 Support Ø 6.35 for thread measurement wires in holders, (pair) Dito Ø 6.5, (pair) Dito Ø 8, (pair) 14 M2.5 Support with int. thread M 2.5 for measuring anvils, (pair) Inserts in hardened steel, cone 60 for bore clearance measurement > 10, (pair) Holder for dial gauge contact points for internal groove measurement, (pair) Dito height 58, (pair) See also cables chapter 23

18 Professional micrometer DESCRIPTION S_Mike PRO CYLINDRICL Ø6.5 utomatic wake-up by moving the measuring spindle (system S.I.S) Sleeping mode after 20 min. of no use (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system* Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Measuring range covered with 5 instruments only Set of 3 micrometers available Quick displacement of the measuring spindle 12 / rotation djustable measuring force 5N / 10N (versions X) Repeatability and reproducibility never reached before Thimble in polyacetal-copolymer Measuring surface in hard metal Non-rotating spindle Ø 6.5 Fast handle movement with ratchet S_connect proximity Simple and friendly functions * description on page 5 24

19 Professional micrometer DIMENSIONL DRWING S_Mike PRO CYLINDRICL Ø6.5 D C 28 E Ø 6.5 Ø28.5 F 7.2 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Repeatability 2) µm nvils types C D E F S_Connect : Proximity Prot. rating accor. to IEC Setting by PC djustable measuring force Non-rotating spindle Fast movement Preset function Smart Inductive Sensor according to DIN 863 2) ± 1 digit 3) see cables chapter Ø N / 10N US / RS 232 / Wireless 3) IP67 even connected 10N 25

20 Professional micrometer DIMENSIONL DRWING S_Mike PRO CYLINDRICL Ø2 X D C Ø X E Ø 2 F 7.2 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Repeatability 2) µm nvils types C D E F S_Connect : Proximity Prot. rating accor. to IEC Setting by PC djustable measuring force Non-rotating spindle Fast movement Preset function Smart Inductive Sensor according to DIN 863 2) ± 1 digit 3) see cables chapter Ø US / RS 232 / Wireless 3) IP67 even connected 5N / 10N 10N 26

21 Professional micrometer DIMENSIONL DRWING S_Mike PRO KNIFE-SHPED Measuring surface in hard metal X D C 28 Ø28.5 E X F 7.2 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Repeatability 2) µm nvils types C D E F S_Connect : Proximity Prot. rating accor. to IEC Setting by PC djustable measuring force Non-rotating spindle Fast movement Preset function Smart Inductive Sensor according to DIN 863 2) ± 1 digit 3) see cables chapter x US / RS 232 / Wireless 3) IP67 even connected 5N / 10N 10N 27

22 Professional micrometer DIMENSIONL DRWING S_Mike PRO DISC-SHPED D 56.4 C E Ø28 Ø25 F TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Repeatability 2) µm Flatness µm Parallelism µm Gear unit nvils types C D E F S_Connect : Proximity Prot. rating accor. to IEC Setting by PC djustable measuring force Non-rotating spindle Fast movement Preset function Smart Inductive Sensor according to DIN 863 2) ± 1 digit 3) see cables chapter (full-touch-contact) / 10 (partial contact) (full-touch-contact) / 10 (partial contact) Measurable module > 0.5 Ø US / RS 232 / Wireless 3) IP67 even connected 5N

23 Professional micrometer SIC INSTRUMENT S_Mike PRO including: , et Measuring rang / 0-30 Plastic case luminium case SIC INSTRUMENT Instrument according to technical specifications Pin gauge 50 (for X) Pin gauge 75 (for X) Lithium battery CR2032 included Instruction manual Calibration certificate MICROMETERS SETS / 0600 / 1000 Pin gauge 50 Pin gauge 75 Lithium battery CR2032 included Instruction manual Calibration certificate CCESSORIES Stand Pin gauge 50 Pin gauge 75 Pin gauge

24 30

25 Depth gauge DESCRIPTION S_Depth PRO PRESET function utomatic switching of measuring direction Setting of the «constant» for measurement with cylindrical or spherical anvils dditional bases available (see accessories) Digital rotating display LCD utomatic reference switching (REFI/ REFII) by the measurement inversion Clamping knob ase 100 with clamping system for additional bases Measuring anvil with pin ø 4 (measuring ball probe M2.5 in standard) 31

26 Depth gauge S_Depth PRO DIMENSIONL DRWING Ø 112 (course) TECHNICL SPECIFICTIONS Measuring range Max. Error µm Repeatability µm L S_Connect : Power 2 References PRESET function ± 1 digit 2) see cables chapter US / RS232 / Wireless 2) 32

27 Depth gauge SIC INSTRUMENT S_Depth PRO Instrument according to technical specifications Lithium battery CR2032 included Instruction manual COMPTILE CCESSORIES Length Thickness dditionnal base dditionnal base dditionnal base all probe M2.5 (standard) nvils UP&DOWN nvil with pin Ø4 PPLICTIONS Measure of an internal groove (height) thanks to the constant. 33

28 Protractor DESCRIPTION S239 Measuring range 1x360, 2x180, 4x90 Mechanical parts in stainless steel Locking device Digital Display LCD, rotating display Height of digits 8.5 Fine adjustment knob Stainless steel, hardened and ground

29 Protractor S239 DIMENSIONL DRWING TECHNICL SPECIFICTIONS Measuring range Max. Error Resolution Max. rotation speed Protection rating according to IEC 529 S_Connect : Opto Selection of measuring direction see cables chapter minutes of arc 1 minute of arc / / sec IP51 US / RS232 / Digimatic / Wireless SIC INSTRUMENT Instrument according to technical specifications Wooden box 2) Scale 200 ( ) Lithium battery CR2032 included Instruction manual 2) Fumigated, compatible ISPM 15 and NIMP 15 35

30 Protractor CCESSORIES S Scale L 200 Scale L 300 Scale L Stand for vertical application and small angular measurements Square for small angular measurements PPLICTIONS Measurement with accessory type Standard measurement Measurement with accessory type