DIGICO 1 and 2 Electronic Indicators Both models are remarkable for their versatile functions, large measuring span and high accuracy.
|
|
- Sheryl Daniel
- 6 years ago
- Views:
Transcription
1 DIGICO 1 and 2 Both models are remarkable for their versatile functions, large measuring span and high accuracy. LC display with colored background 6 digits plus minus sign.34" x.177"/ 9 x 4. mm digit height (HxW) Analog and digital display. Digital display can be placed in any position for easy reading. Zero-setting at any point within the measuring span. Data input through the keyboard. Counting sense reversal. Classification of measured values through symbols; in the external power supply mode, the display lights up with a green background or changes to orange or red if the part is not within tolerance. Value storage by means of the functions Highest value, Lowest value or Highest value minus lowest value. See the table opposite mm / in Conversion 1.0 in / 40 mm scale length 2 scale divisions According to selected tolerances 1.20 in/ 30.4 mm (DIGICO 1) or in / 60.4 mm (DIGICO 2) Incremental glass scale Max. 1 m/s (DIGICO 1) or max. 2 m/s (DIGICO 2) Plunger guiding on a plain bearing M2. thread for the measuring insert DIGICO 1: 2 μm DIGICO 2: 3 μm 1 μm 1 μm See table on page E V lithium battery or mains adapter in in mm mm DIGICO or or DIGICO or or 0.01 E-3
2 Measuring Force DIGICO 1 DIGICO 2 Measuring force* close to the plunger stop bottom: 0.8 N ± 0.1 N 0.90 N ± 0.20 N top: 1.10 N ± 0.20 N 1.4 N ± 0.2 N Force hysteresis*: 0.10 N 0.1 N * Valid with the indicator used vertically, with downward oriented plunger, or in static measurement h with lithium battery % / C 0 F to 104 F 0 F to 122 F Degree of protection (IEC 6029): IP 4 (standard model housing).6 lb/ 290 g (DIGICO 1).7 lb/ 310 g (DIGICO 2) Moved mass (plunger): DIGICO 1: 28 g DIGICO 2: 27 g Supplied in a suited carrying case with: 1 lithium battery No lever No Identification number Inspection report with a declaration of conformity Accessories for DIGICO 1 and V mains adapter V lithium battery, LR6, AA Lever for the plunger retraction Plunger retract cable, 8. in/ 220 mm long E-4
3 Brown & Sharpe Series 1034, DIGICO 10 and 11 These three versions are made for optimum adaptation to your metrologybased applications. LC display. 6 digits plus minus sign.33 in / 8. mm digit height See tables Zero-setting of display anywhere within the measuring span. Display and keyboard rotate through 270. Ability to hold the measured values. Digit entry (PRESET function). Two reference points. Digital output. Models DIGICO 10 Provided with all the features listed above. mm / in Conversion Glass scale with capacitive, incremental divisions Max. perm.: 1. m / s Case in light alloy. Front face in polyamide. Stainless steel plunger guided on a plain bearing. M2. thread for the measuring insert. See tables 2 μm 2 μm (.0001"/0.001 mm), opto-coupled 3V lithium battery, type CR DIGICO 10: 4000 h DIGICO 11 / MIN/MAX: 2000 h 41 F to 104 F 68 F to 140 F EN : 1993 EN : E-
4 in in mm mm μm Amm Bmm g IEC 6029: IP 1 See tables Supplied in a suited carrying case with: 1 lithium battery, type CR 2032, No Identification number Inspection report with a declaration of conformity DIGICO 11 With same basic features as set forth on page E-7 plus the following functions: Possible entry of limiting values for classification through color LEDs: green for Good, red for Scrap, amber for Rework. Value storage using the functions Highest value, Lowest value and Highest value minus lowest value. Counting sense reversal. in in mm mm μm Amm Bmm g DIGICO MIN/MAX With same basic features as DIGICO 11 except that PRESET function is not available. Mainly used for value classification through the function Highest value minus lowest value. in in mm mm μm Amm Bmm g E
5 LCD, digits + sign Digit height:.24 in / 6 mm Zero-setting of display Max. error: 20 μm μm 0. to 0.9 N (±0.1 N) max. 2 m/s TESA DIGICO 12 Mini-Dial Gages, Electronic IP6 compliant Made to measure in extreme workshop conditions. Water and coolant resistant. TESA DIGICO 12 Standard Models 1.73 in / 44 mm diameter dial IP6 compliant Water and coolant resistant data output combined with external power supply Patented inductive measuring system Choice between absolute ABS and relative REL measuring modes Numerical display PRESET function Switchable measuring direction Direct inch/metric conversion Automatic shut down 19.3 Number of measurements per second: 7 Working tempe - rature range: 41 F to 104 F / + C to +40 C 3V lithium battery, type CR 2032 Battery life: > 300 hours 101. Ø 8 h6 Ø 4 Ø oz / 70 g EN ø 1. IP6 (IEC 29) Shipping packaging incl. 1 lithium battery, type CR 2032 (No ) Serial number Declaration of conformity (Diagram dimensions shown in mm) in in mm mm Models IP6 with electronic module protected against the penetration of liquids without or or 0.01 with Models IP6 with both mechanics and electronics protected against the penetration of liquids without or or 0.01 with E-7
6 86. TESA DIGICO 12 HP Models High-precision measuring system IP6 compliant Water and coolant resistant Combined analog/digital display Analog readout: ± 0.02 ±1.2 mm Measuring modes: NOR/MIN/MAX/MAX-MIN 1.73 in / 44 mm diameter dial data output combined with external power supply Patented inductive measuring system Zero-setting of display Direct inch/metric conversion Automatic shut down. Can also be locked Ø 8 h6 Ø 4 Ø in in mm mm Models IP6 with electronic module protected against the penetration of liquids or or 0.01 Models IP6 with both mechanics and electronics protected against the penetration of liquids or or ø 1. LCD, digits + sign Digit height: 24 in / 6 mm Zero-setting of display Max. error: 4 μm 2 μm 0.4 to 0.7 N (±0.1 N) Max. 2 m/s Number of measurements per second: 9 Working tempe - rature range: 41 F to 104 F / + C to +40 C 3V lithium battery, type CR 2032 Battery life: > 4000 hours (Diagram dimensions shown in mm) 2. oz / 70 g 19.0 Accessories Back with lug Upper lift lever Lower lift lever Pneumatic retraction device connection cable with external power supply V lithium battery, type CR 2032, 190 mah EN IP6 (IEC 29) Shipping packaging incl. 1 lithium battery, type CR 2032 (No ) Serial number 9. ø Inspection report with a declaration of conformity Ø 2./ E (Diagram dimensions shown in mm)
7 1 in / 2.4 mm Range LC display. 6 digits plus minus sign 1 μm mm / in Conversion Output Digit-Dial plus Digital Indicator Digit-Dial plus con forms to AGD Group 2 mechanical spec i fi ca tions. Its ex cel lent re sponse al lows spindle travel up to 20 in/sec. In addition, Digit-Dial plus features selection of either English or metric readout with direct con ver sion, preset ca pa bil ity, a se lectable display pro vid ing maxi mum, minimum and range values with out put for SPC applications: Measuring range in. (2.4 mm) Display digit LCD with sign Resolution in. (1 μm) Accuracy at 68 F (20 C)... ± in. (±1 μm) Response speed in/sec (00 mm/sec) Measuring force oz. (10 g) Display mode Maximum value, Mini mum value or Range (maxi mum to mini mum), Absolute, Preset Power supply 120 VAC/60 Hz AC adapter (part number ) or self-con tained re charge able bat tery, con tinu ous op era tion for 8 hours on full charge (part number )..3 oz / 10 g Ordering Information: Digit-Dial plus Optional Output Cable - 2 Pin - for PC 9-G-0196B 2463 Optional Output Cable - 10 Pin Accessories Digit-Dial plus Lift Lever Digit-Dial plus Contact Point Digit-Dial plus Flat Back Digit-Dial plus Lug Back Digit-Dial plus 1" Dust Bellow Digit-Dial plus Release Cable Adapter Digit-Dial plus Air Release Cable Digit-Dial plus Mech. Release Cable Digit-Dial plus Lift Lever Digit-Dial plus Air Release Cable Digit-Dial plus Mech. Release Cable E-9
Electronic indicators, Dial Gauges, Precision Indicators
Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50
More informationDial gauges Electronic and Analogue
Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile
More informationDIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
More informationDigital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
More informationMICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
More informationDIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
More informationMarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationDial Test Electronic Indicators Indicators (Lever Type}
Dial Test Electronic Indicators Indicators (Lever Type} External Micrometers Dial Comparator Gage Brown & Sharpe s new dial comparator gages provide you with the accuracy needed to make comparative measurements,
More informationHeight Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
More informationCalipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationElectronic Indicator
IN/MM 2ND TOL Electronic Indicator Operating Manual Non-Analog Digital Display 3 Programmable Presets and 3 Programmable Ratios Extra-Large Number Display Incremental Measuring Mode SPC Cables USB, MTI,
More informationPrecision Measuring Equipment and Industrial Supplies since 1924.
J.W. DONCHIN CO. www.jwdonchin.com Precision Measuring Equipment and Industrial Supplies since 1924. 4841 W. Chicago Ave. - Chicago, IL 60651 Phone: 773-261-2182 Fax: 773-261-2867 sales@jwdonchin.com J.W.
More informationMicromar. a new generation with the reference-system
- 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer
More informationElectronic Length Measuring Equipment
Electronic Length Equipment www.tesatechnology.com O-1 ELECTRONIC LENGTH MEASURING EQUIPMENT TESA INDUCTIVE PROBES AND ELECTRONIC EQUIPMENT TESA probes: At the cutting edge of technology TESA develops,
More informationElectronic Indicator
TIR ABS CR /MM Electronic Indicator Operating Manual Analog Display Analog Visual Display Incremental Measuring Mode SPC Cables USB, MTI, RS232 Measuring System in English or Metric Travel Reverse Auto
More informationBEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
More informationSummer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationCalipers. B-1
alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite
More informationS_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
More informationSIMPLE, ACCURATE AND INEXPENSIVE MEASUREMENT. MILLIMESS DIAL COMPARATORS.
- Millimess. Digital and Dial Comparators SIMPLE, ACCURATE AND INEXPENSIVE MEASUREMENT. MILLIMESS DIAL COMPARATORS. Millimess is the classic amongst all measuring instruments, for over 60 years the Millimess
More informationS_Cal EVO. Professionnal Caliper DESCRIPTION
Professionnal Caliper DESCRIPTION S_Cal EVO Integrated data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants,
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationTESA INDUCTIVE PROBES WITH DETACHABLE CABLE
PRODUCT INFO TESA INDUCTIVE PROBES WITH DETACHABLE CABLE TESA INDUCTIVE PROBES WITH DETACHABLE CABLE allow users to maintain their measuring stations quicker and cheaper. By unscrewing the probe from its
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationApplication Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.
E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More informationBest Deals of. Expiration Date:12/19/ $ $ $ C/ON ABS/
C/ON ABS/ Best Deals of 00590303 $159.00 2014 Expiration Date:12/19/14 00590093 $119.00 00599090 $89.00 2.0 www.tesagroup.com Brown & Sharpe TLC-TWIN Wireless Solution Bi-directional counication between
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationTESA UPD Gauge Block Comparator with a 25 mm Measuring Span
TESA UPD Gauge Block Comparator with a 25 mm Measuring Span Direct measurement of gauge blocks with a variation in nominal length of up to 25 mm or 1 in. Allows the number of required reference gauge blocks
More informationINSTRUCTIONS FOR USE UNIVERSEL DIAL GAUGE. Fabrique d'instruments de mesure de précision. Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse
INSTRUCTIONS FOR USE DIAL GAUGE UNIVERSEL Fabrique d'instruments de mesure de précision Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse Tél. (021) 635 11 74 Fax (021) 634 54 71 Contents INSTRUCTION
More informationDigimatic Indicators. Dial Indicators. Dial Test Indicators. Dial Indicator Applications and Stands
Small Tool Instruments and Data Management ID-H Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator Applications and Stands ID-C INDEX Digimatic Indicators ABSOLUTE Digimatic Indicator
More informationPocket Thickness Measures
Pocket Thickness Measures Watch size guardians of accuracy, known and trusted throughout industry and commerce. Slim as a pocket watch, only 1/2" front to back. Weighs only 2 ounces. Complete instructions
More informationTABLE OF CONTENTS WARRANTY
WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationDO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.
- DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationDIGIMATIC INDICATOR ID-H
Small Tool Instruments and Data Management Optical Remote Control Compatible, High-Accuracy Digital Indicator DIGIMATIC INDICATOR ID-H Catalog No. E4281-543 World-Class Digital Indicator Delivers Higher
More informationPrecision Measuring Equipment and Industrial Supplies since 1924.
J.W. DONHIN O. www.jwdonchin.com Precision Measuring Equipment and Industrial Supplies since 1924. 4841 W. hicago ve. - hicago, IL 60651 Phone: 773-261-2182 Fax: 773-261-2867 sales@jwdonchin.com J.W. Donchin
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationDigimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationDEFECTOMETER High detection sensitivity to surface flaws (even underneath paint) Simple, microprocessor-controlled operation
DEFECTOMETER 2.837 High detection sensitivity to surface flaws (even underneath paint) Simple, microprocessor-controlled operation Automatic lift-off and zero compensation Several alternatives for signal
More informationLSM-500H/501H/503H/506H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units
LSM-0H/1H/3H/6H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units LSM-0H LSM-6H LSM-1H LSM-3H LSM-512H Using a high speed scanning laser beam, the Laser Scan Micrometer can accurately measure
More informationTESATRONIC Length Measuring Instruments General Overview
TESATRONIC Length Measuring Instruments General Overview Dedicated compact units having either an analogue or a numerical display Usually applied in association with precision handtools or on stationary
More informationCALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
More informationInside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
More informationUser Manual IP Capacitive Series Electronic Indicator M ME M ME-25. starrett.
User Manual 2900 Capacitive Series Electronic Indicator IP67 2900-3-1 2900-3M-25 2900-3ME-25 2900-5-1 2900-5M-25 2900-5ME-25 Table of Contents Guidelines for Indicator Care... 2 2900 Capacitive Series
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationLinear Gages Pages 414, 415, 420 to 42. Counters and Displays Pages 416 to 419, 426 to 428, 430. Laser Hologage Pages 431, 432
Linear Gages Sensorpak Page 412 Linear Gages Pages 414, 415, 420 to 42 Counters and Displays Pages 416 to 419, 426 to 428, 430 Laser Hologage Pages 431, 432 LITEMATIC Motorized low force high precision
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More informationCalibration Equipment
Calibration Equipment L-1 Calibration Equipment CONFIDENCE IS NOT ENOUGH... The control of inspection and measuring equipment is an element of quality management that is now more important than ever before.
More informationWeighing Indicator. Features. Description. Applications
Force Pressure Temperature Switch Weighing Indicator Description The compact Indicator of model E1932X is a precision and cost effective product for weighing applications. They are ideal for use in mobile
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationMitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
More informationInstruction Manual EG-225 DIGITAL LINEAR GAUGE
Instruction Manual EG-225 DIGITAL LINEAR GAUGE in mm MODE RESET POWER +/- ONO SOKKI CO., LTD. Warranty 1. This product is covered by a warranty for a period of one year from the date of purchase. 2. This
More informationSorensen SG Series - Water Cooled kw V A. Programmable Precision High Power DC Power Supply
Sorensen SG Series - Water Cooled Programmable Precision High Power DC Power Supply High Power Density: up to 15 kw in 3U Wide Voltage Range: 0-40 V and 0-60 V, in increments of 5 kw from 5 to 15 kw Fast
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationNEW - Quick Mode - The revolutionary way to simplify measurement!
+ D i g i m a r NEW - Quick Mode - The revolutionary way to simplify measurement! The new Height Measuring Instrument Digimar 817 CLM Quick Height 2 Digimar 817 CLM Quick Height The new Height Measuring
More informationCoolant Proof Micrometers MDC-MX Series
Coolant Proof Micrometers MDC-MX Series Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency Small Tool Instruments and Data Management Catalog No.E12023 Coolant Proof
More informationT EN TROVIS Electropneumatic Positioner
T 8484-1 EN TROVIS 3730-1 Electropneumatic Positioner Application Single-acting positioner for attachment to pneumatic globe and rotary valves. Self-calibrating, automatic adaptation to valve and actuator.
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationUser Manual Series Electronic Indicator. starrett.com
User Manual 2900 Series Electronic Indicator starrett.com Table of Contents Guidelines for Indicator Care... 2 Operating Instructions... 3 Indicator Components, Dimensions & Layout... 3 Button Functions...
More informationSeries DiTemp Series SolarTemp. Digital Thermometers
JJ Series DiTemp JJ Series SolarTemp Digital Thermometers DS_Digital_thermometers /7 Without external power supply The SolarTemp and DiTemp series offers remarkable features and performance characteristics
More informationQM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE PRE1424 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424 High-Performance Height Gage QM-Height Series Very high accuracy ±(2.4+2.1L/600) μm Built-in air levitation
More informationDigimatic Indicators
F Small Tool Instruments Digimatic Indicators Dial Indicators/ Dial Test Indicators ID-C Calculation Type ID-N / ID-B Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator Applications
More informationSpecifications - Installation and Operating Instructions. Duracell is a registered trademark of The Gillette Company.
Bulletin P-DM-1100 Series DM-1000 DigiMag Digital Differential Pressure Gage Specifications - Installation and Operating Instructions The Series DM-1000 DigiMag Digital Differential Pressure Gage is the
More informationDIGIMATIC MICROMETER. High Accuracy and 0,1 µm digital step PRE1491 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
DIGIMATIC MICROMETER High Accuracy and 0,1 µm digital step SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1491 HIGH ACCURACY World's First 0.1 μm* Resolution Micrometer *0.1 µm=0.0001 mm "d2" is a generic
More informationMultipoint Measurement and Statistical Evaluation
Product Overview Linear Encoders Angle Encoders Multipoint Measurement and Statistical Evaluation Rotary Encoders 3-D Touch Probes Digital Readouts Numerical Controls Multipoint inspection apparatuses
More informationNo Gimmicks No Hurdles
LIFETIME WARRANTY No Gimmicks No Hurdles e s n e s n o N o N We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues
More informationHygroLog HL20 and HL21 Data Logger. User Guide
Page 1 of 17 HygroLog HL20 and HL21 Data Logger Page 2 of 17 Table of contents: 1. Overview... 3 1.1 General... 3 2. General description... 4 2.1 Models... 4 2.2 Required accessories... 4 2.3 Batteries...
More informationNo Gimmicks No Hurdles No Nonsense
No Gimmicks No Hurdles No Nonsense We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues to lead the way. NEW!
More informationConnectivity. A-1
www.tesatechnology.com A-1 TESA Software, cables and links for the transfer of measuring results. Inspection, traceability and cost reduction have a growing significance in all industrial sectors. This
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationGR Series Adjustable Angular Gripper
GR Series Adjustable Angular Gripper www.numatics.com Table of Contents GR90 Series Angular Grippers Features & Benefits 3 How to Order 3 Dimensions 4 Technical Specifications 5 Switch Information 6 Quick
More informationHeight Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationContact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
More informationPrecimar. PLM and CiM Universal Length Measuring Machines
24 Precimar. Precision Length Metrology Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationLinear Height LH-600E SERIES 518 High-Performance 2D Measurement System
Linear Height LH-0E SERIES 518 High-Performance 2D Measurement System Excellent accuracy of (1.1+0.6L/0)µm with 0.1µm/0.5µm resolution/repeatability. Perpendicularity (frontal) of 5µm and straightness
More informationDepth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
More information