Part no.: CML720i-T R-M12 Light curtain transmitter

Transcription

1

2 Technical data Basic data Series 720 Operating principle Throughbeam principle Device type Transmitter Contains Accessories for the use of the BT-2R1 Application Object measurement Optical data Operating range Operating range Operating range limit Operating range limit Measurement field length Number of beams Beam spacing Light source LED light wavelength Guaranteed operating range m Typical operating range m 1,430 mm 72 Piece(s) 20 mm LED, Infrared 940 nm Measurement data Minimum object diameter 30 mm Electrical data Protective circuit Performance data Supply voltage Residual ripple Open-circuit current Short circuit protected Polarity reversal protection Transient protection V,DC %,From U B ma, The specified values refer to the entire package consisting of transmitter and. Timing Readiness delay Cycle time 450 ms 2.56 ms Connection Number of connections Plug outlet Connection 1 Type of connection Function Thread size Type Material No. of pins Encoding 1 Piece(s) Rear side Connector Sync-input Connection to Voltage supply Male Metal 5 -pin A-coded 2 / 10

3 Mechanical data Design Dimension (W x H x L) Housing material Lens cover material Net weight Housing color Type of fastening Cubic 29 mmx35.4 mmx1,463 mm Metal, Aluminum Plastic 1,600 g Silver Via optional mounting device Groove mounting Operation and display Type of display Number of LEDs LED 1 Piece(s) Environmental data Ambient temperature, operation C Ambient temperature, storage C Certifications Degree of protection IP 65 Protection class III Certifications c CSA US Standards applied IEC Classification ecl@ss ecl@ss ETIM 5.0 EC Suitable s CML720i- R R/CN- Interface: CANopen Connection: Connector,, Rear side, 8 -pin CML720i- R R/CV- Analog outputs: 2 Piece(s), Voltage, Current Connection: Connector,, Rear side, 8 -pin CML720i- R R/ D3- Interface: RS 485 Connection: Connector,, Rear side, 8 -pin 3 / 10

4 CML720i- R R/L- Interface: IO-Link Connection: Connector,, Rear side, 8 -pin CML720i- R R/PB- Interface: PROFIBUS DP Connection: Connector,, Rear side, 8 -pin CML720i- R R/PN- Interface: PROFINET Connection: Connector,, Rear side, 8 -pin Dimensioned drawings All dimensions in millimeters 4 / 10

5 A Beam spacing 20 mm B Measurement field length 1430 mm F M6 thread G Fastening groove L Profile length 1448 mm T Transmitter R Receiver Y 5 mm 5 / 10

6 Electrical connection Connection 1 Type of connection Function Thread size Type Material No. of pins Encoding Connector Sync-input Connection to Voltage supply Male Metal 5 -pin A-coded Pin Pin assignment 1 FE/SHIELD 2 V+ 3 GND 4 RS 485 Tx+ 5 RS 485 Tx- Operation and display LEDs LED Display Meaning 1 Green, continuous light Continuous mode Off No communication with the / waiting for trigger green, flashing in sync with the measurement Measurement frequency display Part number code Part designation: CML7XXi-YZZ-AAAA.B/CC-DD-EEE-FF CML 7XXi Y ZZ AAAA B CC Operating principle: Measuring light curtain Series: 720i: 720i series 730i: 730i series Device type: T: transmitter R: Beam spacing: 05: 5 mm 10: 10 mm 20: 20 mm 40: 40 mm Measurement field length [mm], dependent on beam spacing Equipment: A: connector outlet, axial R: rear connector outlet Interface: L: IO-Link CN: CANopen PB: PROFIBUS PN: PROFINET CV: Analog current and voltage output D3: RS 485 Modbus 6 / 10

7 DD EEE FF Special equipment: PS: Power Setting Electrical connection: : connector EX: Explosion protection: Accessories Connection technology - s KB DN/CAN-1000 SBA Suitable for interface: DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 1,000 mm KB DN/ CAN SBA Suitable for interface: DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 10,000 mm KB DN/CAN-2000 SBA Suitable for interface: DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 2,000 mm KB DN/ CAN SBA Suitable for interface: CANopen, DeviceNet Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 20,000 mm KB DN/CAN-5000 SBA Suitable for interface: DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 5,000 mm KDS DN--5A- -5A-P3-010 Suitable for interface: IO-Link, DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 1,000 mm KDS DN--5A- -5A-P3-020 Suitable for interface: IO-Link, DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 2,000 mm KDS DN--5A- -5A-P3-050 Suitable for interface: IO-Link, DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 5,000 mm 7 / 10

8 KDS DN--5A- -5A-P3-100 Suitable for interface: IO-Link, DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 10,000 mm KDS DN--5A- -5A-P3-200 Suitable for interface: IO-Link, DeviceNet, CANopen Connection 1: Connector,, Axial, Female, A-coded, 5 -pin Connection 2: Connector,, Axial, Male, A-coded, 5 -pin Cable length: 20,000 mm Mounting technology - Mounting brackets BT-2L Mounting bracket Design of mounting device: Angle, L-shape Mounting bracket, at device: Screw type BT-2Z Mounting bracket Design of mounting device: Angle, Z-shape Mounting bracket, at device: Screw type Mounting technology - Swivel mounts BT-2R1 Mounting bracket Contains: 2x BT-R swivel mount, 1 cylinder for mounting on the light curtain Mounting bracket, at device: Clampable Type of mounting device: Turning, 360, Plastic Mounting technology - Other BT-10NC60 Sliding block Contains: 10x BT-NC sliding block Bore hole 1: Ø 4.7 mm Bore hole 2: M6 Design of mounting device: Sliding block Fastening, at system: Mounting thread Mounting bracket, at device: Groove mounting BT-10NC64 Sliding block Contains: 10x BT-NC-M4-M6 sliding block Bore hole 1: M4 Bore hole 2: M6 Design of mounting device: Sliding block Fastening, at system: Mounting thread Mounting bracket, at device: Groove mounting BT-10NC65 Sliding block Contains: 10x BT-NC-M5-M6 sliding block Bore hole 1: M5 Bore hole 2: M6 Design of mounting device: Sliding block Fastening, at system: Mounting thread Mounting bracket, at device: Groove mounting 8 / 10

9 BT-2P40 Mounting bracket BT-2SB10 Mounting bracket BT-2SB10-S Mounting bracket BT-2SSD Mounting bracket Contains: 2x BT-P40 clamp bracket Design of mounting device: Mounting clamp Fastening, at system: Groove mounting Mounting bracket, at device: Groove mounting Type of mounting device: Clampable Contains: 2x BT-SB10 Design of mounting device: Mounting clamp Mounting bracket, at device: Clampable, On the lateral C- groove Type of mounting device: Swiveling Swivel range: Contains: 2x BT-SB10-S Design of mounting device: Mounting clamp Mounting bracket, at device: Clampable, On the lateral C- groove Swivel range: Shock absorber: Yes Mounting bracket, at device: Groove mounting, Clampable, Screw type Type of mounting device: Swiveling BT-2SSD-270 Mounting bracket Mounting bracket, at device: Screw type, Clampable, Groove mounting Type of mounting device: Swiveling BT-4SSD Mounting bracket Contains: 4x Mounting bracket, at device: Groove mounting, Clampable, Screw type Type of mounting device: Swiveling SET MD12-US2-IL1.1 + Zub. Diagnostics Interface: USB Connections: 2 Piece(s) Degree of protection: IP 20 Device columns UDC-1600-S2-R Device column Dimensions: 160 mm x 1,660 mm x 149 mm Column height without foot: 1,600 mm Functions: Adjustable, 3 directions, Mounting and protection of light curtains and multiple light beam devices UDC-1900-S2-R Device column Dimensions: 160 mm x 1,960 mm x 149 mm Column height without foot: 1,900 mm Functions: Adjustable, 3 directions, Mounting and protection of light curtains and multiple light beam devices 9 / 10

10 UDC-2500-S2-R Device column Dimensions: 160 mm x 2,560 mm x 149 mm Column height without foot: 2,500 mm Functions: Mounting and protection of light curtains and multiple light beam devices, Adjustable, 3 directions UDC-3100-S2-R Device column Dimensions: 160 mm x 3,160 mm x 149 mm Column height without foot: 3,100 mm Functions: Mounting and protection of light curtains and multiple light beam devices, Adjustable, 3 directions Notes Observe intended use! This product is not a safety sensor and is not intended as personnel protection. The product may only be put into operation by competent persons. Only use the product in accordance with its intended use. For UL applications: For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National Electric Code). These proximity switches shall be used with UL Listed Cable assemblies rated 30V, 0.5A min, in the field installation, or equivalent (categories: CYJV/CYJV7 or PVVA/PVVA7) 10 / 10