SIPART DR21 Controllers
|
|
- Colleen Tucker
- 6 years ago
- Views:
Transcription
1 Siemens AG 2010 SIPART DR21 Controllers /2 /2 Application, design /3 Mode of operation /8 Control and display functions /10 Function diagram /11 Configuring switches, on-line/off-line parameters /12 Technical data /14 Ordering data Siemens MP
2 Siemens AG 2010 Application Design 2008
3 Siemens AG 2010 Mode of operation 2008
4 CB He N Si P ts ybl BLB BLS BLPS tsh RB RC H N w A1,2,3,4 MUF w 2008 Siemens AG 2010
5 Siemens AG
6 Siemens AG 2010 Other configurable functions to enhance the ease of use and operational safety of the SIPART DR21 controller only with 6DR2104 and when S 2 =
7 Siemens AG 2010 PROFIBUS DP module SES module RS 232/RS
8 Siemens AG 2010 Control and display functions Process operation level Control and display of: setpoint w manipulated variable y actual value x etc. Selection level Parameter value/ configuring switch setting Parameter value/ configuring switch number Configuring level 2008
9 Siemens AG 2010 AdAP CAE3 2008
10 Siemens AG S7 249 S6 I, U, R UNI S8 to S10 Slot 1 S7 I, U, R BA7 24 V V S3 S4 S I = t BA8 Basic settings S1 to S3 Analog inputs S4 to S21 S8 Configuration of slot 3 U S22 I Digital inputs S23 to S41 V Setpoint tracking S42 to S4 I 24 V t t Control algorithm S46 to S48 t S11 S12 S13 0 % S14 M AE1A +24 V + V U REF Y switchover S49 to S3 Y indicator S4 to S S22 AE2A AE3A AE4A x1 S21 S1 x2 S16 w EA /x3 S17 Y N Analog output S6 S18 Y R S19 Z S Δ y Δ y M N L 4BA 2BE 24 V 2BA Rel Switching output S7 Digital outputs S8 to S7 S output 6DR2100/4/ BE Limit monitors S76 to S80 Slot 3 S84 to S91 x/w indicator S81 V Restart conditions S82 to S83 Serial interface S84 to S91 SES K output AA/Iy 6DR2100/4/ 10 0/4 to 20 ma <900 _ Ω Slot BA2 BA1 or > 19 V < 30 ma Options Txd Rxd AE1 4 to 20 ma + AE2 1/4 1/3 AE3 1/2 1/1 Options 2/4 2/3 2/2 AE4 2/1 BE1 6 BE L+ M M L AE1 as AE2 U H + I Slot 2 3/6 3/ 3/4 3/3 3/2 3/1 4/2 4/7 4/8 4/3 N PE 4 to 20 ma 4L 2L or > 13 V or < 4. V L N 2008
11 Siemens AG 2010 Configuring switch list ÁÁÁ ÁÁ ÁÁÁ ÁÁ ÁÁÁ ÁÁÁ ÁÁÁ Á ÁÁ ÁÁÁ ÁÁ ÁÁ ÁÁÁ ÁÁÁ Á ÁÁÁ ÁÁ ÁÁÁ ÁÁÁ ΔΔ ÁÁÁ ÁÁ ÁÁ ÁÁÁ ÁÁÁ ÁÁ ÁÁÁ ÁÁ ÁÁÁ ÁÁÁ ÁÁÁ ÁÁ ÁÁÁ ÁÁ On-line parameters Off-line parameters ÁÁÁ ÁÁ ÁÁÁ ÁÁÁ ÁÁÁ Á ÁÁÁ ÁÁÁ ÁÁ ÁÁ ÁÁÁ Á Á } 2008
12 Siemens AG 2010, Edition March 2010 Technical data Technical data EC Declaration of Conformity No. AE000608I - 01 Relay module 3 ) 6DR2804-8A/B Conformity The product described above in the form as delivered is in conformity with the provisions of the following European Directives: 2004/108/EC EMC Directive of the European Parliament and of the Council on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC. 2006/9/EC LVD Directive of the European Parliament and of the Council on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits. 2008
13 Siemens AG 2010 Technical data Technical data (continued) 2008
14 Siemens AG 2010, Edition March 2010 Ordering data Ordering data Ordering data SIPART DR21 controller 72 x 144, 6DR DR2100- Quick reference Operating and configuring Assembly and installation instructions Manual com/sipartdr Module for analog signals Additional Instructions can be downloaded from Internet SIPART DR PROFIBUS interface / Instructions SIPART DR21 Serial SIPART 6DR210x Bus interface / Instructions Switching signal module Coupling relay module Scope of supply CD-ROM with complete documentation Interface modules Available ex-stores Input/output modules and accessories 2008
SIPART Controllers and Software Catalog MP
SIPART Controllers and Software Catalog MP 31 2005 Introduction 1 SIPART DR Summary 2 Supersedes: Catalog MP31 2003 The products listed in this catalog are also available in the electronic catalog CA 01
More informationThe indicated product family is in confomance with the regulations of the following European Directives:
Product Family: Manufacturers: Manufacturer's Agent: Product Family: Siemens Energy & Automation, nc. Siemens AG 3000 Bill Gariand Road Electronics Works Amberg Johnson City, TN 37601 Wemer-von-Siemens-Str.
More informationSIPART Software. 9/2 Serial interface/hardware. 9/3 Communication driver for S7/ PCS 7. 9/4 SIPART device driver WinCC
SIPART Software Siemens AG 2007 /2 Serial interface/hardware /3 Communication driver for S7/ PCS 7 /4 SIPART device driver WinCC /5 Graphic configuration using SIPROM DR24 Notes: Parameterization and configuration
More informationCE DECLARATION of CONFORMITY
Manufacturers: Siemens Energy & Automation, Inc. Siemens AG 3000 Bill Garland Road Electronics Works Amberg Johnson City, TN 37601 Werner-von-Siemens-Str. 50 D-92224 Amberg Germany Manufacturer's Agent:
More informationIntrinsic Safety Control Drawing
s Intrinsic Safety Control Drawing system in total PLC PC Not hazardous area PROFIBUS DP Associated Apparatus Class I, DIV 2, GP A...D Class I, ZN 1, IIC T4 PROFIBUS-DP Ex i Terminating resistor Class
More informationSIPART PS2. Smart Valve Positioner. Venting Gauge Block. Installation Instructions. Answers for industry.
SIPART PS2 Smart Valve Positioner Venting Gauge Block Installation Instructions Edition 12/2014 Answers for industry. Introduction 1 Safety notes 2 SIPART PS2 Smart Valve Positioner Venting Gauge Block
More informationS5-115U. Application
S5-115U S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic program execution
More informationSIPART DR22 6DR2210. Edition 08/2010. Manual SIPART DR22 6DR2210 C79000-G7476-C154-04
SIPART DR 6DR Edition 8/ Manual SIPART DR 6DR C79-G7476-C54-4 Block diagram AE - AE - AE - / /9 / / /4 / S5 I,U S6 I,U S7 I,U U U U t t t S S S AEA AEA AEA S S S S5 FE S6 FE S7 FE Standard settings S to
More informationMotor controllers CMMP-AS, for servo motors
Key features Comparison of motor controllers Motor controller CMMP-AS CMMS-ST for motor type Servo motor Stepper motor Positioning records 255 63 Measuring system Analogue/incremental/absolute Incremental
More informationS5-115U. Application
S5-115U Application S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic
More informationLaboratory automation
Siemens AG 2008 Laboratory automation /2 SIMATIC PCS 7 LAB: Compact control system for the laboratory automation Siemens ST PCS 7.1 Update October 2008 Laboratory automation Siemens AG 2008 Overview PCS
More informationSIPART DR21. Serial SIPART 6DR210x Bus Interface. Contents. Explanation to the Manual C73000-B7476-C143. Page
SIPART DR Serial SIPART 6DR0x Bus Interface Operating Instructions C79000-B7476-C45-04 Explanation to the Manual C73000-B7476-C43 Contents Page Hardware: SIPART 6D0x... 3 Software: Function SIPART 6DR0x
More information5 MICROMASTER 440 specifications
Issue 10/06 This Chapter contains: Table 5.1 Table 5-2 Table 5-3 Table 5-4 Table 5-5 contains the general technical specifications for the MICROMASTER 440 inverter contains dimensions, the required cooling
More information5 MICROMASTER 420 specifications
Issue 10/06 This Chapter contains: Table 5-1 Table 5-2 Table 5-3 Table 5-4 contains the general technical specifications for the MICROMASTER 420 inverter contains terminal tightening torques contains information
More informationDF PROFI II PC/104-Plus
DF PROFI II PC/104-Plus Installation Instructions V1.4 23.09.2009 Project No.: 5302 Doc-ID.: DF PROFI II PC/104-Plus COMSOFT d:\windoc\icp\doku\hw\dfprofi ii\installation\pc104+\version_1.4\df profi ii
More informationExtruder Controls ExtruVision S
Extruder Controls ExtruVision S ExtruVision S - The compact system solution for controlling, visualization, and operating extrusion systems Combination of control panel BA Touch with 5.7'' monitor and
More informationSIMATIC S Update to the S System Manual, edition 01/2015 Product Information
SIMATIC S7-1200 Product Information Overview to Documentation Update S7-1200 In spite of efforts to ensure the accuracy and clarity in the product documentation, some of the pages in the S7-1200 Programmable
More informationSIPROM DR24. Manual. Graphical Configuration of the multifunction unit SIPART DR24. Introduction 1. Functions of SIPROM DR24. Graphical Layout 3
Introduction 1 Functions of 2 Graphical Layout 3 Tabular Layout 4 Graphical Configuration of the multifunction unit SIPART DR24 Manual Edit parameters 5 Documentation 6 Short-cut keys 7 Error messages
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG LOW VOLTAGE SIEMENSSTRASSE 10 93055 REGENSBURG, GERMANY This is to certify that representative samples of Motor Controllers, Manual See following pages for list of models Have been
More informationSINAUT ST7 Dedicated Line Modem MD2
SINAUT ST7 Dedicated Line Modem Operating Instructions Edition 07/2002 SINAUT Telecontrol with SIMATIC S7 Overview 1 Mounting and Installation 2 SINAUT ST7 Dedicated Line Modem Operating Instructions Instructions
More informationSIMATIC S plus TIA Portal
Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of
More informationSX90 Process Controller
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMotor controllers CMMS-ST, for stepper motors
Key features Performance characteristics Compactness Motion control Small dimensions Full integration of all components for controller and power section, including RS232 and CANopen interface Integrated
More informationCertificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018
Certificate Certificate number: 2018-016 Certified by EY CertifyPoint since: July 10, 2018 Based on certification examination in conformity with defined requirements in ISO/IEC 17065:2012 and ETSI EN 319
More informationInstallation and Operating Instructions
smartfox Installation and Operating Instructions Technical Specifications ENGISH 0VGND I-OUT 24 VDC light 2 3 N PE July 2016 DAfi Smartfox - Energy consumption regulator for systems with own power production.
More informationEY-EM : Remote I/O module, ecolink
EY-EM 510...512: Remote I/O module, ecolink510...512 How energy efficiency is improved Optimum adjustment to applications by means of module technology. Reduction in wiring Features Part of the SAUTER
More informationRefer to attachment for more details. Andreas Meyer
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationET 200SP distributed I/O system SIMATIC. ET 200SP ET 200SP distributed I/O system. Preface. Product overview. Application planning 2.
Preface Product overview 1 SIMATIC ET 200SP Product Information Application planning 2 Installation 3 Connecting 4 Configuring 5 Maintenance 6 Technical specifications 7 Accessories/spare parts 8 Translation
More informationAutomation Unit TM 1703 ACP. SICAM 1703 flexible for all applications. Answers for energy.
Automation Unit SICAM 1703 flexible for all applications Answers for energy. Outstanding performance: Rising demands for efficiency in nearly all processes require increasingly innovative automation solutions
More informationMarket Surveillance Action Plan
Ref. Ares(2015)402331-02/02/2015 MEMORANDUM Date 12 November 2014 1(8) Spectrum Department Market Surveillance Action Plan 2013-2015 1 Legal basis According to Section 1 of the Ordinance (2007:951) with
More informationAnalog Amplifier FAA-27. Technical Manual. Flintec GmbH Bemannsbruch Meckesheim GERMANY.
Analog Amplifier FAA-27 Technical Manual Flintec GmbH Bemannsbruch 9 74909 Meckesheim GERMANY www.flintec.com Table of Contents 1. Safety Instructions... 2 2. Declaration Of Conformity... 3 3. Front View,
More informationOperating Instructions SIPART. Electropneumatic positioners SIPART PS2 with PROFIBUS PA. Edition 10/2013. Answers for industry.
SIPART Electropneumatic positioners Operating Instructions Edition 10/2013 Answers for industry. Introduction 1 Safety information 2 SIPART Electropneumatic positioner Operating Instructions Description
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company FNMT Real Casa de la Moneda C/Jorge Juan, 106 28009 Madrid, Spain to confirm that its trust service
More informationThis explosion proof Pulse Generator is equipped with an inductive sensor for use in
Quick reference 50 pulses per revolution of measuring drum For use with TG05 to TG50 and BG4 to BG100 Uni-directional Applicable for ex-proof areas (1) Application The Pulse Generator for RITTER Drum-type
More informationPower supply. Phases: 3. Short-circuit capacity 10 ka AGS
5113003 Power supply Voltage: 400 V AC Phases: 3 Frequency: 50 Hz Current: 6 A Short-circuit capacity 10 ka AGS CE marking location The CE marking is located on the outside of the door, in the upper left
More informationCM PtP RS422/485 BA communication. module (6ES7540 1AB00 0AA0) SIMATIC. S7-1500/ET 200MP CM PtP RS422/485 BA communication module (6ES7540 1AB00 0AA0)
CM PtP RS422/485 BA communication module (6ES7540 1AB00 0AA0) SIMATIC S7-1500/ET 200MP CM PtP RS422/485 BA communication module (6ES7540 1AB00 0AA0) Manual Preface Documentation guide 1 Product overview
More informationSIPART PS2. Smart Valve Positioner. Integral Volume Booster. Installation Instructions. Answers for industry.
SIPART PS2 Smart Valve Positioner Integral Volume Booster Installation Instructions Edition 11/2014 Answers for industry. Introduction 1 Safety notes 2 SIPART PS2 Smart Valve Positioner Integral Volume
More informationFlow Measurement SITRANS F US Inline
Overview Function Displays and keypad Operation of the SITRANS FUS060 transmitter can be carried out using: Keypad and display unit HART communicator PC/laptop and SIMATIC PDM software via HART communication
More informationInstallation and Setup. In This Chapter... Installing the H0 PSCM The Profibus Network Configuring the Module
Installation and Setup 1 2 In This Chapter.... Installing the H0 PSCM The Profibus Network Configuring the Module 2 2 Installing the H0 PSCM Remove the Slot Cover The first step in installing the option
More informationDifferential Probe. GDP-040D for GDS-200 & GDS-300 Series QUICK START GUIDE GW INSTEK PART NO. 82DP-040D0MA1 ISO-9001 CERTIFIED MANUFACTURER
Differential Probe GDP-040D for GDS-200 & GDS-300 Series QUICK START GUIDE GW INSTEK PART NO. 82DP-040D0MA1 ISO-9001 CERTIFIED MANUFACTURER This manual contains proprietary information, which is protected
More informationSIMATIC FS600 laser scanner
Overview with pt covers Integration X2 X1 FS10_0018 Contact assignment Connection Description Position Connectable accessies Order No. X1 15-pin Sub-D connect f control interface $ Socket, complete, 15-pin
More informationThe possibility of combining interface modules allows various bus and network systems to be integrated into the B&R SYSTEM 2005.
5.2 CP260 5.2.1 General Information The CPU is inserted in the main rack directly next to the power supply module. It requires two slots. Only the status LEDs can be seen with the module door closed. The
More informationContinuous level measurement Ultrasonic controllers
Siemens AG 0 Overview is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms. Benefits Monitoring and
More informationPSI-MODEM-SHDSL/PB. Broadband PROFIBUS extender, SHDSL PROFIBUS leased line modem. Data sheet _en_03. 1 Description. 1.
PSI-MODEM-/PB Broadband PROFIBUS extender, PROFIBUS leased line modem Data sheet 104396_en_03 1 Description PHOENIX CONTACT 2013-08-21 1.1 Features The PROFIBUS extender can be used to easily network PROFIBUS
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationTXM1.8T. Triac module Used for Thermic and motor-driven actuators (AC 24 V) TX-I/O
s 8 179 8179p01 TX-I/O Triac module sed for Thermic and motor-driven actuators (AC 24 V) AC 24 V-controlled devices TXM1.8T 8 triac outputs (AC 24 V), configured individually for: Permanent contact Three-point
More informationTXM1.8RB. TX-I/O Blinds module
s 8 178 8178p01 TX-I/O Blinds module TXM1.8RB 8 non-floating relay outputs for... 4 blinds motors with 2 end switches, or 2 blinds motors with 3 end switches, or 2 blinds motors with 2 end switches + 1
More informationCombining Today s Best Technologies. For Tomorrow s Break Through Discoveries. Feedback Versions Analog Sin/Cos. Control Modes.
Feedback Versions Analog Sin/Cos Control Modes Command Interface Feedback I/O - Digital Accelnet Micro Panel Dimensions: mm [in]. Model * Vdc Ic Ip ACJ-055-09 20-55 9 ACJ-055-18 20-55 6 18 20-90 1 ACJ-090-09
More informationSiemens Spares. Preface 1. Scope of Delivery 2 SIPLUS CMS4000. Product Characteristics 3 ION PROFIBUS DP SPY T001 Installation and Maintenance 4
Preface 1 Scope of Delivery 2 Product Characteristics 3 Industrial I/O-Node ION PROFIBUS DP SPY T001 Installation and Maintenance 4 6AT8000-1BA00-5XA0 Notes on the CE Mark 5 References 6 Appendix 7 Release
More informationSiemens AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE AMBERG, GERMANY
Issued to: Siemens AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that Auxiliary Devices representative samples of 3UF70 followed by 0 or 1 followed by 0
More informationCompact universal controllers
7 867 Compact universal controllers RWF55... The RWF55 is used mainly for controlling the temperature or pressure in oil- or gas-fired heating plants. If the relevant parameters are set, the RWF55 can
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationRoom controller STRA-17
Room controller STRA-17 Application example Room 2 Room 3 Room 4 SCADA EXOline alt. RS485 Modbus Transformer STRZ-24 (Required component) STRA-17 is a preprogrammed room controller intended to control
More informationSITOP in the SIMATIC Design
Siemens AG 2017 /2 Introduction /3 1-phase, 24 V DC (for S7-300 and ET 200M) /9 1-phase, 24 V DC (for S7-1200) /11 1-phase, 24 V DC (for S7-1500 and ET 200MP) /14 3-phase, 24 V DC (ET 200pro) Siemens KT
More informationEY-RU : Room operating unit, ecounit
Product data sheet 9.00 EY-RU 31...36: Room operating unit, ecounit31...36 How energy efficiency is improved Individual setting of occupancy and absence as well as a room setpoint correction and control
More informationS7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI;
S7-400 CPU 412-1 6ES7 412-1XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; 0.075 ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; send and receive capability for direct data exchange;
More informationExtension module for lighting control
s 3 842 DESIGO RXC Extension module for lighting control Extension to the RXC30 / RXC31 / RXC38 room controller RXC40.1 RXC40.5 The RXC40 extension module is used in conjunction with an RXC30, RXC31 or
More informationSED2 VFD NEMA Type 3R Bypass/Air Conditioner
SED2 VFD NEMA Type 3R Bypass/Air Conditioner Description The NEMA Type 3R Bypass with Air Conditioner allows SED2 to be employed in a harsh environment. The SED2 is designed specifically for HVAC applications
More informationSwitching module for AC V and up to three load stages, with manual switching
8 149 PTM13-M3 DESIGO I/O modules Switching module for AC 24 250 V and up to three load stages, with manual switching PTM13-M3 Signal converter for connection to P-bus, with three interlocked on/off control
More informationSIPART PS2. Smart Valve Positioner. Integral Volume Booster. Installation Instructions. Answers for industry.
SIPART PS2 Smart Valve Positioner Integral Volume Booster Installation Instructions Edition 10/2014 Answers for industry. Introduction 1 Safety notes 2 SIPART PS2 Smart Valve Positioner Integral Volume
More informationEY-RU : Room operating unit, ecounit
Product data sheet 94.051 EY-RU 310...316: Room operating unit, ecounit310...316 How energy efficiency is improved Individual setting of occupancy and absence as well as a room setpoint correction, control
More informationImpulse switching module
8 156 PTM14250A-P DESIGO I/O modules Impulse switching module PTM14250A-P for AC 24250 V, single-stage, with manual switches, double module Signal converter for connection to P-bus and for delivering impulse
More informationCATALOG SELECTION / PRODUCT SELECTION
catalog selection / product selection Motor Control Drives CATALOG SELECTION / PRODUCT SELECTION M-Max Machinery Drive Catalog Numbering System MMX AA D F - 0 Base Catalog Number Option Drives Phase =
More informationR70 Ethernet to CAN interface Manual (1.4 EN)
R70 Ethernet to CAN interface Manual (1.4 EN) General information R70 Ethernet to CAN interface Manual Version 1.4 EN, 04/2009, DOC01816 Copyright 2009 by d&b audiotechnik GmbH; all rights reserved. d&b
More informationSPA-ZC 302. Profibus-DPV1/SPA Gateway. Product Guide. spa-zc302_rightco300
Profibus-DPV1/SPA Gateway SPA-ZC 302 Product Guide spa-zc302_rightco300 Issued: 25.11.2003 Status: Updated Version: D/16.05.2008 Data subject to change without notice Features Profibus DP Version 1 connectivity
More informationModular Two-Wire Telecontrol System
Modular Two-Wire Telecontrol System Transmission via electrically isolated cables over distances up to 30 km Modular expansion up to 32 stations and a maximum of 512 I/O modules Easy parameterization of
More informationSwitching modules for AC 230 V, non-potential-free, single and double module
8 43 PTM2QD DESIGO I/O modules Switching modules for AC 230 V, non-potential-free, single and double module PTM4QD PTM2QD PTM4QD Signal converters for connection to P-bus, with on/off control outputs (binary
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationSIMOREG Still leading the field - after years of success
SIMOREG: The successful DC drive range INNOVATION With Tradition SIMOREG Still leading the field - after years of success 1 Power Module offering Available in 400V, 460V, 575V, 690V, and 830V ranges 2
More informationAMC 8 & IOC 8T. Analog Monitoring Card Type AMC 8 and Input / Output Card Type IOC 8T FEATURES
Analog Monitoring Card Type AMC 8 and Input / Output Card Type IOC 8T FEATURES Two cards providing 8 channels of temperature and process monitoring for VM 600 systems 8 channels of software selectable
More informationControl D. Controller Module for Proportional Valve Control. Installation Manual
Control D Controller Module Table of Contents Control D 1 1.1 1.2 1.3 1.3.1 1.3.2 1.4 2 3 4 5 5.1 5.2 5.3 6 7 8 Description 3 How To Order 3 Operating Elements 3 Adjustment 4 Operation 4 Auto-adapt 4 Operating
More informationShort Description. Version
S7-400 S7-400 CP 443-1 6GK7 443-1EX11-0XE0 V2.6 S7 CP for Industrial Ethernet ISO and TCP/IP with SEND/RECEIVE and FETCH/WRITE interface, long data, UDP, TCP, ISO, S7 communication, routing, module replacement
More informationVIPA System 300S - The High-Speed control system
Software HMI System 500S System 400V System 300V System 300S System 200V System 100V High-speed control system programmable with STEP 7 from Siemens Features VIPA System 300S: Programmable with Step 7
More informationEX-RC1 Remote I/O Adapter
EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter
More informationPCI Express Gigabit Ethernet Adapter. User's Guide
PCI Express Gigabit Ethernet Adapter User's Guide FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
More informationSIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information
SIMATIC Digital Input Module Product information 1 SIMATIC Digital Input Module Product Information This documentation is part of the documentation package with the order number: S7-300 Automation System:
More informationDAQ-System for DynoWare
Electronics & Software DAQ-System for DynoWare 5697A... Data Acquisition System for Force Measurement Data acquisition system for interfacing and controlling charge amplifiers and signal conditioners in
More informationUse with 0 to 70 C ambient. temperature SIMATIC. Process Control System PCS 7 Use with 0 to 70 C ambient temperature. Preface 1. Product combination 2
Use with 0 to 70 C ambient temperature SIMATIC Preface 1 Product combination 2 Product family 3 Process Control System PCS 7 Use with 0 to 70 C ambient temperature System Manual 02/2015 A5E35458345-AA
More informationPIGEON RB100-CM3. Features. Applications
PIGEON RB100-CM3 Pigeon RB100-CM3 is a computer designed for use in control and automation systems. Pigeon RB100-CM3 is powered by Raspberry Pi Compute Module 3 and Linux system. Features Powered by Raspberry
More informationSIMATIC S7-200 PRICE LIST
BẢNG GIÁ PLC SIEMENS S7-200 SIMATIC S7-200 PRICE LIST Part number SIMATIC S7-200 CLASSIC (GERMANY ORIGIN) SIMATIC S7-200 Central Processing Unit 6ES7211-0AA23-0XB0 6ES7211-0BA23-0XB0 6ES7212-1AB23-0XB0
More informationNo. Product Information Drawing number Edition
SIMATIC Bus links SIMATIC Bus links SIMATIC Bus links DP/PA coupler, DP/PA link and Y link Operating instructions The following supplement is part of this documentation: No. Product Information Drawing
More informationModicon Momentum Fipio Communicator Setup Manual
Modicon Momentum Fipio Communicator Setup Manual eng March 2005 W915905430301A_07 2 Table of Contents About the Book.......................................5 Part I Momentum on Fipio - General......................
More informationOnline data sheet DUSTHUNTER SB100 SCATTERED LIGHT DUST MEASURING DEVICES
Online data sheet DUSTHUNTER SB100 DUSTHUNTER SB100 A B C D E F H I J K L M N O P Q R S T 15267 14181 certified certified Ordering information Type DUSTHUNTER SB100 Part no. On request The exact device
More informationSIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V/AC V (6ES7138-4CB11-0AB0) Preface. Properties 1. Parameters 2.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Power module PM-E DC24..48V/AC24..230V (6ES7138-4CB11-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 04/2007
More informationModular controllers CECX
Key features At a glance Versatile The controller is functionally designed as a master and motion controller. It is a powerful control unit that can Economical simultaneously execute both comprehensive
More informationProduct and Applications Description. Note. Example of Operation. Installation Instructions. Application Programs WARNING
Product and Applications Description Note If the application program is not loaded completely by the ETS, you had better interrupt the 24 V voltage supply of the I/O-module during the loading interval.
More informationFlow Measurement SITRANS F M. Transmitter MAG 5000/ /34 Siemens FI Overview
Flow Measurement Siemens AG 2012 Overview Design The transmitter is designed as either IP67 NEMA 4X/6 enclosure for compact or wall mounting or 19" version as a 19 insert as a base to be used in: 19" rack
More informationTB3P/TB4P I/O PROFIBUS DP FIELDBUS MODULE FOR PNEUMATIC MANIFOLD VALVES. Pg. 1 di 14
TB3P/TB4P I/O PROFIBUS DP FIELDBUS MODULE FOR PNEUMATIC MANIFOLD VALVES Pg. 1 di 14 INDEX Legend of Symbols... 3 Conformity Declaration... 3 System Descripiton... 4 Module Specifications... 4 Installation
More information1. CP430, CP470, CP474, CP770 and CP774
1. CP430, CP470, CP474, CP770 and CP774 1.1 Order data CPUs CP430, CP470, CP474, CP770 and CP774 CP430, CP470, CP770 CP474, CP774 Model number 7CP430.60-1 7CP470.60-2 7CP474.60-2 7CP770.60-1 7CP774.60-1
More informationSCEOS01 Safety EOST-DO module Safety I/O Turbine EOST 2ch (Rotation speed input 1ch + EOST activation output 2ch)
Type SCEOS01 Summary *Number of I/O channels *Module ambient temperature 10 Hz~12 KHz rotation speed input 1ch : EOST activation output 2ch (Individual isolation) : -5~60 *In compliance with Functional
More informationLexium 05 motion control
Characteristics Environmental characteristics Conformity to standards have been developed to conform to the strictest international standards and the recommendations relating to electrical industrial control
More informationEU Declaration of Conformity
EU Declaration of Conformity Document No. Product: Miniature circuit breakers, Residual current circuit breakers and Isolating switches, DIN series Manufacturer: MITSUBISHI ELECTRIC INDIA PRIVATE LIMITED
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationFlow Measurement SITRANS F US Inline
Overview Function Displays and keypad Operation of the SITRANS FUS060 transmitter can be carried out using: Keypad and display unit HART communicator PC/laptop and SIMATIC PDM software via HART communication
More informationMotor controllers CMMD-AS, for servo motors
Key features Comparison of motor controllers Motor controller CMMP-AS CMMS-ST for motor type Servo motor Stepper motor Positioning records 255 63 Measuring system Analogue/incremental/absolute Incremental
More informationSIMATIC Distributed I/O Product information for the ET 200iSP Operating Instructions (A5E ) 01/2010
SIMATIC Distributed I/O Product information for the ET 200iSP Operating Instructions (A5E00247483-04) 01/2010 Product Information Order number Type Order number 4 DO DC23.1V/20mA SHUT DOWN "H" 6ES7132-7RD01-0AB0
More informationLevel instruments. Continuous level measurement - Ultrasonic controllers SITRANS LUC500. 5/146 Siemens FI
SITRANS LUC00 Siemens AG 009 Overview SITRANS LUC00 is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms.
More informationSIMATIC. FM 356 Application Function Module, Installation and Startup. Preface, Contents. User Information. Product Overview
Preface, Contents User Information SIMATIC FM 356 Application Function Module, Installation and Startup Manual Product Overview 1 Designing the Mechanical Configuration 2 Addressing the M7-300 Modules
More informationF1000 User's Manual. (Version: V1.01)
(Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...
More informationelise 3 embedded linux server including safety instructions
elise 3 embedded linux server including safety instructions Contents Getting Started... 2 Safety and Regulatory Instructions for Elise3... 8 English Getting Started These instructions will help you getting
More information