AND COMMUNICATION MODULES

Transcription

1 Page -4 Page -4 MICRO PCs 10 Inputs/Outputs (RD10...) 12 Inputs/Outputs (RD12...) Inputs/Outputs (RD...) 12VDC,, or VAC power supply Relay or transistor outputs. EXPANSION AND COMMUNICATION MODUES 8 digital inputs/outputs, or VAC power supply Analog inputs, V or 0...mA Analog outputs, V or 0...mA Relay or transistor outputs PT100 temperature sensor inputs Modbus -RTU protocol slave communication unit. Page -5 ACCESSORIES Program backup memory Programming and supervision software Power supply unit HMI operator panel with graphic CD. Page -5 STARTER KITS Complete kit to begin using micro PCs Each equipped with RD relay, programming-supervision software and USB connecting cable.

2 Micro PCs 10, 12 and Input-Output base units Expansion modules with 4 digital Inputs and 4 digital Outputs Expansion modules with analog Inputs-Outputs Modbus-RTU communication module RS232/USB serial interface port for PC, HMI operator panel or program backup memory connection On-board programming languages: Italian, English, Spanish, French, German, Portuguese and Chinese PC programming languages: Italian, English and Spanish. Micro PCs SEC. - PAGE Base modules Expansion and communication modules Accessories Starter kits Dimensions Wiring diagrams Technical characteristics AUTOMATION AND CONTRO

3 Micro PCs MICRO PC - EXCEPTIONA PERFORMANCE! SYSTEM CONTRO AND SUPERVISION - Contact status viewing in simple and small screen display - Faculty to add the micro PC to systems integrated on data networks. By using supervision software, a multiclient structure can also be managed through Web interface. QUICK CONTRO BOARD INSTAATION - Fewer number of components - ess wiring with minor number of connections. REPETITIVENESS - ess errors during panel building - Considerable time saving. FEXIBIITY - Quick correction of abnormal conditions at final testing - Fast changes on control boards. FUNCTION BOCKS AND MEMORY Timer (T) 31 (delay on/off, recycle, pulsing,...) Real Time Clock (RTC) 31 (daily, weekly, monthly and yearly mode) Counter (C) 31 Analog comparator (G) 31 User s pages (H) - 16 characters - 4 lines 31 Auxiliary relay - Scratchpad (M + N memory types) Data register (DR) 240 Saving can be in memory storage of: - Auxiliary relay - Counter value - Data register. PROGRAM SIZE anguage ADDER (contact scheme) FBD (function blocks) 300 lines 260 blocks FUNCTIONS PWM OUTPUT Pulse train generation with programmable pulse time and frequency MUTIPEXER Selection of 1 of 4 values based on the combination of two digital signals A B C D B HIGH SPEED INPUT Position and speed detection SHIFT FUNCTION - activation of pulsed outputs in sequence Out PID IN: OUT: INc: Heating switch on and required temperature setting Current room temperature Measured room temperature in an exact spot OUTc: Temperature adjusting and controlling. BOOEAN OGIC BOCKS Output activation based on a series of digital signals In 1 In 2 In 3 In 4 Out

4 Micro PCs OPERATOR PANE RX P01 HMI INTERFACE RX P01 is an HMI operator panel, used with many types of PCs or other intelligent controllers equipped with communication port. By using the HMI, the values of both PC inner registers and relay status can be monitored and changed with the keys or EDs. In this way, machinery and equipment functioning results to be simple and direct. The RX SW P01 editor software permits to make dedicated screens by taking advantage of the graphic display to view bitmaps, bar graphs and trend lines. BACKIGHT 192x64 PIXE GRAPGIC CD Read numerical Static values text Dynamic text Read status (bits) Commands Images Display bar graphs and trend lines Write numerical values COMMUNICATION MODES RX P01 supports Modbus-RTU protocol and different communication modes can be chosen, such as RS232 and RS485. Micro PCs Micro PCs Power analyzers Generating set controllers RS232 RS485 Soft starters Motor drives Power factor controllers Transfer switch controllers -3

5 Micro PCs Base modules RD10... RD12... RDR D024 P1 Expansion and communication modules RE... Order Auxiliary In/Out❶ Qty Wt code supply per voltage pkg n [kg] Base modules. RD12R D024 8/4 relay RD12T D024 8/4 transistor RDR D024 12/8 relay RDR D024 P1❷ 12/8 relay RD12R A024 8/4 relay RDR A024 12/8 relay RD10R A VAC 6/4 relay RDR A VAC 12/8 relay RDR D012 12VDC 12/8 relay ❶ Inputs/Outputs. ❷ With RS485 onboard. Order Auxiliary In/Out❶ Qty Wt code supply per voltage pkg n [kg] Expansion and communication modules❸. RE02A D024 2 analog outputs V/0...mA RE04A D024 4 analog outputs V/0...mA RE04P D024 4 PT100 temp sensor inputs RE08R D024 4/4relay RE08T D024 4/4 transistor RE08R A024 4/4 relay RE08R A VAC 4/4 relay RE P00 Modbus-RTU protocol communication unit ❶ Inputs/Outputs. ❸ The expansion modules are supplied with connector for base module. General characteristics FUNCTIONS Addition-Subtraction on variables Multiplication-Division on variables Comparator on variables HMI display for parameter viewing and programming PWM output High speed input (1kHz) PID function Multiplexer Analog ramp Register transfer (numerical variables and status) Shift function Boolean logic blocks RDR D024 P1 with RS485 port onboard. Operational characteristics 8A Ith current relay outputs for AC and DC versions 0.3A transistor outputs for DC version 0-10V analog inputs for DC version Version: modular for mounting on 35mm DIN rail (IEC/EN 60715) or M4x15mm screw fixing Type of terminal: Screw IEC degree of protection: IP. Certifications and compliance Certifications obtained: U isted, for USA and Canada (cuus - File E300049), as Programmable Controllers. Compliant with standards: IEC/EN , U508, CSA C22.2 n 142. INPUTS/OUTPUTS REFERENCE TABE BASE MODUES BASE + DIGITA EXPANSIONS Type Power supply Inputs Outputs Max I/O RD12RD012 12VDC 8 digital + 4 digital/analog 8 relay + 24❹ RD12RD024 6 digital + 2 digital/analog 4 relay RD12TD024 6 digital + 2 digital/analog 4 transistor RDRD024 8 digital + 4 digital/analog 8 relay + 24 RDRD024P1 8 digital + 4 digital/analog 8 relay + 24 RD10RA VAC 6 digital 4 relay RDRA VAC 12 digital 8 relay + 24 RD12RA024 8 digital 4 relay RDRA digital 8 relay + 24 EXPANSION AND COMMUNICATION MODUES RE02AD024 2 analog RE04AD024 4 analog RE04PD024 4 PT100 RE08RD024 4 digital 4 relay RE08TD024 4 digital 4 transistor RE08RA VAC 4 digital 4 relay RE08RA024 4 digital 4 relay REP00 RS485 Modbus-RTU protocol slave communication unit ❹ Expansion modules supplied at. -4 Dimensions page -6 Wiring diagrams page -6 Technical characteristics page -7

6 Micro PCs Accessories RX 1V3 D024 RX C00 RX P01 RX C02 Starter kits Order Description Qty Wt code per pkg n [kg] Accessories. RX M00 Program backup memory RX C00 PC (RS232)-RD connecting cable, 1.5m/5ft long RX C03 PC (USB)-RD connecting cable, 1.5/5ft long RX SW Programming and supervision software (CD-ROM) RX 1V3 D024 Power supply unit, VAC/, 1.3A RX D00 User s manual Italian edition (paper) RX D01 User s manual English edition (paper) RX D02 User s manual Spanish edition (paper) RX D03 User s manual French edition (paper) RX P01 HMI operator panel, 1 0.0, RS232, RS485 (Modbus -RTU Master) RX C02 PC-RX P01 connecting cable RX SW P01 RX P01 editor software (CD-ROM) Starter kits. RDKIT 12R D024 RD starter kit complete with RD12R D024 base module, RX SW software and RX C03 cable RDKIT 12R A024 RD starter kit complete with RD12R A024 base module, RX SW software and RX C03 cable RDKIT 10R A240 RD starter kit complete with RD10R A240 base module, RX SW software and RX C03 cable Power supply unit and backup memory caracteristics The RX 1V3 D024 power supply produces a direct-current voltage to power the base and expansion modules in circumstances when is not available in the application. The power supply can also be used to power eventual auxiliary circuits. The RX M00 backup memory allows to save the user s program and to simply and quickly transfer it to the base modules. RX P01 panel general characteristics power supply RS232 communication port: Direct connection to using RX C00 Connection to other devices using a standard D-SUB 9 serial cable RS485 communication port RX SW P01 editor software for specific pages and easy use. FUNCTIONS Send commands Read status Provide static and dynamic texts Write variables Read variables: Numerical value Bar graph Trend line. Programming At any time and with extreme simplicity, can be set up and reprogrammed to satisfy new requirements and improve the operation of a system. Programming is simple and intuitive and can be done directly on the base module keypad or by personal computer, connected by RX C00 (RS232) or RX C03 (USB) interface and using the relative RX SW software. With a personal computer, two programming language locs can be used: FBD (Function Block Diagrams) and ADDER (contact scheme). Both of the following can be accomplieshed: Simulate the program directly off-line on a personal computer to test if it runs correctly. Use the supervision mode to check the project on-line. There are 8 function keys on front, dedicated to onboard adjustment, control and supervision of digital input and output status, analog input values, time and date entry and the operation status of the itself. Certifications and compliance Certifications obtained: U isted, for USA and Canada (cuus - File E300049), as Programmable Controllers for power supply and HMI units anbd base module of kits. Compliant with standards: IEC/EN , U508, CSA C22.2 n 142. Maximum combinations + - I1 I2 I3 I4 I5 I6 A1 A2 N AC 100~2 40V Q1 Q2 Q3 Q4 Base unit 12 inputs + 8 outputs 4 inputs + 4 outputs 4 inputs + 4 outputs 4 inputs + 4 outputs 4 PT100 temperature sensor inputs 2 outputs, 0-10V or 0-mA 2 outputs, 0-10V or 0-mA 4 inputs, 0-10V or 0-mA RS485 Modbus-RTU 24 digital inputs (4 configurable as analog 0-10V input) digital outputs (relay, transistor or mixed) 4 analog inputs for PT100 temperature sensors 4 analog outputs configurable as 0-10V or 0/4-mA 4 analog inputs configurable as 0-10V or 0/4-mA 1 RS485 slave communication module. N.B. The sequence of the products given above must be respected for correct operation. Dimensions page -6 Wiring diagrams page -6 Technical characteristics page -7-5

7 Micro PCs Dimensions [mm (in)] BASE MODUES RD RD (2.83 ) 5 (0. ) 54.6 (2.15 ) 44.3 (1.74 ) RD (4.96 ) 5 (0. ) 54.6 (2.15 ) 44.3 (1.74 ) RE... expansion/communication module 8 (0.31 ) 38 (1.50 ) 5 (0. ) 54.3 (2.14 ) 44.3 (1.74 ) 90 (3.54 ) 98 (3.86 ) 106 (4.17 ) 45 (1.77 ) 68 (2.68 ) 90 (3.54 ) 98 (3.86 ) 106 (4.17 ) 45 (1.77 ) 68 (2.68 ) 90 (3.54 ) 98 (3.86 ) 106 (4.17 ) 45 (1.77 ) 68 (2.68 ) 72 (2.83 ) 60 (2.36 ) Ø4.5 (0.18 ) RX1V3 D024 power supply unit 5 (0. ) 52.3 (2.06 ) 44.3 (1.74 ) 80 (3.15 ) RX P01 HMI operator panel (7.07 ) Ø4.5 (0.18 ) Cutout Ø4.5 (0.18 ) 165 (6.50 ) 90 (3.54 ) 97.9 (3.85 ) 106 (4.17 ) 45 (1.77 ) 68 (2.68 ) 101.5(4.00 ) 85.5 (3.37 ) 87 (3.42 ) Ø4.5 (0.18 ) (6.44 ) 5.5 (0.22 ) 33 (1.30 ) Wiring diagrams BASE MODUES RD12R D024 RD12T D024 RD12R A024 RD10R A240 DIGITA VDC ANAOG DIGITA VDC ANAOG I1 I2 I3 I4 I5 I6 A1 A2 DIGITA/ANAOG INPUT I1 I2 I3 I4 I5 I6 A1 A2 DIGITA/ANAOG INPUT N I1 I2 I3 I4 I5 I6 I7 I8 N I1 I2 I3 I4 I5 I6 Q1 Q2 Q3 Q4 TRANSISTOR OUTPUT Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 RDR D012 - RDR D024 RDR D024 P1 DIGITA VDC ANAOG DIGITA VDC ANAOG RS485 I1 I2 I3 I4 I5 I6 I7 I8 A1 A2 A3 A4 DIGITA/ANAOG INPUT Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 I1 I2 I3 I4 I5 I6 I7 I8 A1 A2 A3 A4 DIGITA/ANAOG INPUT Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 A B ❶ 12VDC for RDR D012. RDR A024 RDR A240 N I1 I2 I3 I4 I5 I6 I7 I8 I9 IA IB IC N I1 I2 I3 I4 I5 I6 I7 I8 I9 IA IB IC Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Expansion and communication modules RE02A D024 RE04A D024 RE04P D024 RE08R D024 X1 X2 X3 X4 ANAOG OUTPUT C1 V1 I1 C2 V2 I2 ANAOG INPUT C1 V1 I1 C2 V2 I2 C3 V3 I3 C4 V4 I4 PT100 TEMPERATURE SENSOR A1 B1 b1 A2 B2 b2 A3 B3 b3 A4 B4 b4 RE08T D024 RE08R A024 RE08R A240 Accessories RX 1V3 D024 RE P00 - RX P01 X1 X2 X3 X4 N X1 X2 X3 X4 N X1 X2 X3 X4 N TRANSISTOR OUTPUT OUTPUT + OUTPUT A B S - 1.3A RS485-6

8 Micro PCs Technical characteristics BASE MODUE TYPE RD... D012 RD... D024 RD... A024 RD... A240 POWER SUPPY IEC rated voltage Ue (frequency range) 12VDC (50-60Hz) VAC (50-60Hz) Operating limits VDC VDC VAC (47-63Hz) VAC (47-63Hz) Average current consumption 265mA 125mA (RD12...) 290mA 100mA 185mA (RD...) S Rated voltage 12VDC (50-60Hz) VAC (50-60Hz) Input voltage State 0 < 2.5VDC < 5VDC < 6VAC < 40VAC State 1 > 7.5VDC > 15VDC > 14VAC > 79VAC Delay time 0 to 1 4ms 4ms 90ms 50/45ms (Ue=1VAC) - (0.5ms for high speed) (0.5ms for high speed) 22/18ms (Ue=240VAC) 1 to 0 4ms 4ms 90ms 50/45ms (Ue=1VAC) - (0.3ms for high speed) (0.3ms for high speed) 90/85ms (Ue=240VAC) ANAOG INPUTS FOR DC VERSIONS ONY Input signal range 0-10V Display resolution 0.01V Conversion 12bit Current cunsumption at 10VDC < 0.17mA Input impedance < 1kΩ Admissible overload 14VDC 28VDC Sampling time 5-ms (ADDER); 2-10ms (FBD) Maximum cable length 30m/98ft of screened type DIGITA OUTPUTS Type of output / IEC rated current Ith Relay / 8A (DR...R... / RE08R... only) Transistor / 0.3A (RD...T... / RE08T... only) Applied voltage VAC / 12-30VDC (DR...R... / RE08R... only) VDC (RD...T... / RE08T... only) AMBIENT CONDITIONS Operating temperature C Storage temperature C Relative humidity -90% without condensation HOUSING Version Modular for mounting on 35mm DIN rail (IEC/EN 60715) or M4x15mm screw fixing Connections Type of terminal Screw Conductor section mm 2 / 26-14AWG Tightening torque 0.6Nm / 0.4lbft Maximum cable length 100m/328ft IEC degree of protection IP EXPANSION MODUE TYPE RE02A D024 RE04P D024 POWER SUPPY IEC rated voltage Ue Operating limits vdc vdc ANAOGIC INPUTS/OUTPUTS Type of channels 2 outputs configurable 4 inputs for for voltage or current PT100 temperature sensors Operating limits 0-10V 0-mA C Digital output V mA C Resolution 10mV 40μA 0.1 C Accuracy ±2.5% ±1% Power consumption 70mA 70mA -7